control valves koso hammel dahl v701 series venturi seat valve
TRANSCRIPT
CONTROL VALVES
KOSO HAMMEL DAHL
V701 Series
Venturi Seat Valve
CONTROL VALVES
KOSO HAMMEL DAHL
V701 Series• Size range: 1” – 16”• ANSI Class 150 – 600
– Class 1500 & 2500 also available
• Body Materials: CS, SS, CM• End Connection: Flanged (retains seat ring)• Trim
– 17-4PH and 316SS available– Chrome-Iron for severe services
• As hard as tool steel, HRC 53 (min.)
CONTROL VALVES
KOSO HAMMEL DAHL
V701 Design• Designed for erosive
services– Slurries: Alumina Bauxite
– Flashing services: power plants prior to anti-cavitation trims
• Expanded body reduces fluid velocity by 50%
• Large diameter stem and long guide engagement
CONTROL VALVES
KOSO HAMMEL DAHL
Venturi Seat• Flow over design • Venturi seat reduces
outlet velocity as it enters downstream pipe or vessel.
• Often connected directly to vessel or sacrificial pipe.
• Reduced trim is standard– Full may be available
CONTROL VALVES
KOSO HAMMEL DAHL
Actuator Selection• Flow over and high seat load
require stiff high thrust actuators.– Perfect application for REXA
• Historically used – Pnuematic pistons (Conoflow)– Hydraulic pistons (Ortman)– Rotomotor (Hammel Dahl)– Some small units have used S/D
CONTROL VALVES
KOSO HAMMEL DAHL
Rotomotors on 14” V701 in Louisiana
CONTROL VALVES
KOSO HAMMEL DAHL
Bayer ProcessTo turn bauxite into alumina; • Grind the ore & mix it with lime and caustic soda• Pump mix into high-pressure containers & heat• The aluminum oxide is dissolved by the caustic
soda, then precipitated out of this solution, washed, and heated to drive off water.
• What’s left is the white powder called alumina, which is transformed into aluminum metal in the smelting process.
CONTROL VALVES
KOSO HAMMEL DAHL
Bauxite Processing
• Digestion
• Clarification
• Precipitation
• Calcincation
CONTROL VALVES
KOSO HAMMEL DAHL
CONTROL VALVES
KOSO HAMMEL DAHL
Valtek - Survivor• This is what
Valtek does – Unbalanced– Flow over– Piston
• Optional PSZ ceramic trim
• Fisher – 461• Caldera Eng.
CONTROL VALVES
KOSO HAMMEL DAHL
Industrias Controlpro S.A. de C.V.Blvd. Antonio L. Rodríguez No. 3058 Desp. 404-B Plaza Delphi
Col. Santa Maria, Monterrey Nuevo León C.P. 64650Teléfonos: (81) 8356-2582, (81) 8356-1907, (81) 8356-1898