Is Proud to offer the following manufacturer’s products:

CONTACT: DOUG HAMILTON - EXERGY FLOW SOLUTIONS(210) 842-0199 710 BUFFALO ST, STE 802, CORPUS CHRISTI, TX 78401

ProductsControl ValvesECOTROL®Double-Seated ValvesThree-Way ValvesBIOVENT®Angle Type Valves

Actuators - Positioners

Power PlantSteel MillRefineryCoal GasificationCSP Concentrated Solar Power

Applications

Ball Valves

Series 2000 Shut Down ValveSeries 64 Three-PieceSeries 65-72 Industrial Floating BallSeries 7/ 8 Trunnion Mounted BallSeries F Oil & Gas Floating BallSeries T Two-Piece Seal Welded

Butterfly ValvesSeries 4 Triple OffsetSeries 40/41 Split Body LinedSeries 42/43 LinedSeries 44-49 High Performance Double OffsetSeries 50/52 Resilient SeatedSeries 51/53 Large Diameter Resilient SeatedSeries 55 Double Flanged Double Offset Resilient SeatedSeries 5C/5D Split Body Resilient Seated

SlurryFlo control valves are available for 3 to 60 inch pipe diameters.

From low pressure gravity fed applications to systems with 1500 PSI,

SlurryFlo manufactures valves to CWP, ANSI 150, ANSI 300 and ANSI 600 standards.

World-class Manufacturer of Dynamic & Progressive Valves & Dampers

Custom gate valves featuring high pressure,

high temperature, class IV sealing.

Fabricated DampersLight Duty DampersSpecial DampersStandard Butterfly ValveElastomer Seated ValvesDrawings

Various seat styles available:tadpole, clearance, scissors,and step (machined or non machined).

Alloys to suit your needs:inconel, hastalloy, micro alloys, 310 S/S,330 S/S and other commercially available alloys.

f l o w s o l u t i o n s

e ergyX

Chem FlowtronicsZ1 UNIBODY POWER VALVE: a one-piece metal-seated ball valveengineered for clean steam severe-service (high-pressure, high-temperature)environments, including power generation and critical on/off applications.

Severe-service metal-seated ball valvesand rising-stem ball valves

150 to 4500# ANSI classes Materials: A105, F22, F91, and 316SS

Z2 is a two-piece metal-seated ball valve engineered for severe-serviceenvironments for use in critical applications, including chemical / petro-chemical, refining, power, and mining

Z4 RISING STEM BALL VALVE employs a tilt-and-turn design enablingfrequent cycling, zero-leakage, and low torque operation. This valve is engineered to replace traditional ball, gate, and plug valves in gas processing plants using molecularsieve systems for switching service, pipelines, gas transmission, and other highperformance applications requiring frequent cycling with positive shutoff operation

Designing and manufacturing specialty pharmaceutical, biotech and chemicalprocess piping components, mixers and process systems for over 50 years

PTFE Lined Check & Relief Valves Sight Flow Indicators & Level GaugesSanitary Process Equipment - Mixers & Agitators