control valve cryogenic - haitima valve... · m.a. roxas highway, clark freeport zone, clarkfield,...

C800

E-mail : [email protected]://www.haitima.com.tw

HAITIMAE-mail : [email protected]://www.haitima.com.tw

Taiwan Head Office8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.TEL: +886-2-2658-5800 FAX: +886-2-2658-2266 +886-2-2799-7766

Taiwan FactoryNo.350, WangTian Blvd., YongKang Tech. Ind. Park, YongKang City, Tainan County 710, Taiwan R.O.C.TEL: +886-6-203-3939 +886-6-203-3296~7 FAX: +886-6-203-7766

China FactoryNanLang Ind Park, NanLang Town, Zhongshan, Guangdong, ChinaPost Code: 528451TEL: +86-760-8552-8866 FAX: +86-760-8552-8511

Philippines FactoryM.A. Roxas Highway, Clark Freeport Zone, Clarkfield, Pampanga, PhilippinesTEL: +63-917-525-8994

Canada Vancouver Warehouse19057 Unit 104 25 Avenue Surrey, BC Canada V3S 3V2TEL: +1-604-542-1138 +1-604-818-0368 FAX: +1-604-542-1919

Europe Netherlands WarehouseBlauwwater 23, 5951 DB Belfeld, NetherlandsTEL: +31 (077) 475-4545 +31 (06) 5757-6575 FAX: +31 (077) 475-1535

HAITIMAE-mail : [email protected]://www.haitima.com.tw

Taiwan Head Office8F., No.201, Sec. 2, Tiding Blvd., Neihu District, Taipei City 114, Taiwan R.O.C.TEL: +886-2-2658-5800 FAX: +886-2-2658-2266 +886-2-2799-7766

Taiwan FactoryNo.350, WangTian Blvd., YongKang Tech. Ind. Park, YongKang City, Tainan County 710, Taiwan R.O.C.TEL: +886-6-203-3939 +886-6-203-3296~7 FAX: +886-6-203-7766

China FactoryNanLang Ind Park, NanLang Town, Zhongshan, Guangdong, ChinaPost Code: 528451TEL: +86-760-8552-8866 FAX: +86-760-8552-8511

Philippines FactoryM.A. Roxas Highway, Clark Freeport Zone, Clarkfield, Pampanga, PhilippinesTEL: +63-917-525-8994

Canada Vancouver Warehouse19057 Unit 104 25 Avenue Surrey, BC Canada V3S 3V2TEL: +1-604-542-1138 +1-604-818-0368 FAX: +1-604-542-1919

Europe Netherlands WarehouseBlauwwater 23, 5951 DB Belfeld, NetherlandsTEL: +31 (077) 475-4545 +31 (06) 5757-6575 FAX: +31 (077) 475-1535

HAITIMA

E-mail : [email protected]://www.haitima.com.twHAITIMA CORPORATION

Hyper-Cryogenic Emergency Shut-Off ValveManual Operated Valve for Hyper-Cryogenic

C800

Catalog 2012Printed in Taiwan

HAITIMA

C800 - Hyper-Cryogenic Emergency Shut-Off ValveC800 - Manual Operated Valve for Hyper-CryogenicTable of Contents

Hyper-Cryogenic Valve

The advantages of the design and structure

Hyper – Crylogenic Emergency Shut-O� Valve

Speci�cation

Dimensions

Manual Operated Valve for Hyper-Cryogenic

Speci�cation

Dimensions

1

2

4

5

Since 1984, HAITIMA has been making e�orts to push forward domestic manufacturing of ultraslow temperature vessels with nitrogen as a key ingredient. In response to this domestic manufacturing e�ort, we have also started to develop related valves. In this area, we are a pioneer. With high growth during post-economy era, the industrial use of nitrogen, the use of natural gas, refrigeration industries related with this heat use of: liquid nitrogen, liquid carbon dioxide, etc., related industries of low temperature also grew smoothly, in particular, development in the use of nitrogen in semiconductors and in the electronic industry, etc. During the past 20 years, we have been supplying ultra-low temperature valves. Regarding quality management, we demand high safety, material inspection (material analysis, tension check,and low temperature spot-check), non-destructive tests (radiation check, liquid penetration non-destructive test, ultrasonic non-destructive test) sub-zero environ-ment, various pressure checks, low temperature check, and oil-free treatment & inspection. In addition, we have a powerful technical team. For many years, we have been making great contributions to technological innovation.

• Lightweight and small sized valve housing ----To reduce heat loss of the valve housing, the lightweight and small sized valve housing for ultraslow temperature application was specially designed. The welding method of the handle portion is the most suitable processing method.

• Long bonnet of proper length ---- If the temperature of the ground portion is below the dew point, it is prone to coagulate with the moisture in the air, causing di�culty in operation. If the temperature is too low the glue loses some of its e�ective-ness in sealing, which can cause leakage. Consequently, to prevent the heat of the liquid from directly causing this, the long bonnet was specially designed. This length is the most suitable length design based on the tests and previous performance.

• Ideal valve seat (Soft touch)----The SW or BW valve housings use soft touch valve seats so that the piping cannot be taken out easily and the valve seat and valve housing may not be damaged. Disc sealing is using low temperature characteristics that can stabilize 15% of Glass, Teflon and 3FPCTFE, which can be exchanged when necessary. (Metal touch) ---- Liquefied gas lacks lubricity. Using Austenite Stainless as the material, valve housing is designed. The valve seat is molded with the valve body as a whole. The bearing surface uses Stellite metal which largely increases the life.

• The structure that prevents regasification pressure rise The body of globe valve uses the flexible type that can be fully sealed. But now if the liquefied gas inside the valve housing is sealed absorbing heat from the outside, it may result in regasification and cause a pressure rise as the temperature rises. To avoid this, the structure of the relief hole was designed on the upper �ow measurement.

• Durable GLAND packing U-Ring molded with durable Teflon can be operated. Light and handy and be used semi-permanently. When necessary, it may be made corresponding to various combinations of Packaging.

• Gaskets with good low temperature characteristics Gasket is made of GYLON. It has small shrinkage, good compression restor-ing features and stable low temperature characteristics (-210~260℃). When necessary, it can be ℃

• Handling acid gasoline Ultraslow temperature valves are handled using oil-free Trichloroethane when being assembled, which can be usedwith ease.

HAITIMA

01

C800 - Hyper-Cryogenic Emergency Shut-Off Valve

Specification

Air to open or air to Close by using direct or reverse actuator .

Valve Action

‧Valve Stem : SUS316‧Plug Characteristics : On / Off

Specification‧Type : Globe Type‧Material : SCS14A‧Size : 1/2” ~ 2”‧End Connection : Flanged End , Socket Welded , Butt Welded‧Pressure Rating : JIS 10K, 20K , 30K , ANSI 150, 300LB , DIN PN16, 25‧Bonnet : Extension ( -196℃~ +100℃)‧Seat Ring : PCTFE‧Gland Packing : PTFE‧Gasket : Gylon

Trim

‧Type : Cylinder Actuator Spring Return‧Cylinder Material : Aluminum Alloy‧Air Supply : 3-5 kg/cm²‧Ambient Temperature : -196℃~ +100℃

Actuator

Rate Cv Value

mmBody Size

Inch

Stroke (mm)

Rate Cv

Shut Off Pressure (kg/cm²)

8

5

16

15

1/2”

8

8

15

20

3/4”

8

12

15

25

1“

14

31

14

40

1-1/4”

14

47

12

50

1-1/2”

Socket Welded

Butt Welded

JIS 10K

JIS 20K

JIS 30K

ANSI 150 lb

ANSI 300 lb

PN 16

PN 25

Connection RatingBody Size

1/2”

3/4”

1”

1-1/2”

2”

Body Material

SCS14A

Valve ActionAir to Open

Air to Close

HAITIMA

02


Dimensions

DimensionsParts & Material

Model : C800 Flange Type

ATC ATO

H2 H H2 HH1 D

mm

15

20

25

40

50

inch

1/2”

3/4”

1”

1-1/2”

2”

Valve ATC ATOL

150

150

160

200

230

48

50

63

70

78

442

442

452

548

561

490

492

515

618

639

538

538

548

644

657

586

588

611

714

735

120

120

120

150

150

MaterialNo.

Cylinder

Actuator Stem

Yoke

V-Packing

Bonnet

Plug Stem

Plug

Body

Seat Ring

1

2

3

4

5

6

7

8

9

Aluminum Alloy

SS41

FC250

PTFE

SUS316

SUS316

SUS316

PCTFE

SCS14A

Part Name

HAITIMA

03


Model : C800 Socket Welded

H2 H H2 HH1 D

mm

15

20

25

40

50

inch

1/2”

3/4”

1”

1-1/2”

2”

Valve ATC ATOL

90

100

120

150

180

23

29

34

46

55

d

21.8

27.3

34.1

48.8

61.2

442

442

452

548

561

465

471

486

594

616

538

538

548

644

657

561

567

582

690

712

120

120

120

150

150

ATC ATO

MaterialNo.

Cylinder

Actuator Stem

Yoke

V-Packing

Bonnet

Plug Stem

Plug

Seat Ring

Body

1

2

3

4

5

6

7

8

9

Aluminum Alloy

SS41

FCF250

PTFE

SUS316

SUS316

SUS316

PCTFE

SCS14A

Part Name


Dimensions

04

Specification

Socket Welded

Butt Welded

JIS 10K

JIS 20K

JIS 30K

ANSI 150 lb

ANSI 300 lb

PN 16

PN 25

Connection RatingBody Size

1/2”

3/4”

1”

1-1/4”

1-1/2”

2”

3”

4”

Body Material

SCS14A

BC7

Bonnet

Standard

Extension

Rate Cv Value

Body Size

SCS14A

BC7

mm

Inch

Rate Cv

Stroke (mm)

Rate Cv

Stroke (mm)

6

12

4

10

15

1/2”

8

12

7

12

20

3/4”

15

12

9

15

25

1“

51

20

39

20

50

2”

110

30

--

--

80

3”

205

40

--

--

100

4”

35

20

25

20

32

1-1/4”

--

--

15

15

40

1-1/2”

Body Material

Type

Size

Temperature

Valve Stem

End Connection

Pressure Rating

Seat Ring

Gland Packing

Gasket

SCS14A

Globe Type

Bonnet : Extension ( -196℃ ~ +100℃)

Bonnet :Standard ( 0℃ ~ +100℃)

SUS316

JIS 10K, 20K , 30K , ANSI 150, 300LB , DIN PN16, 25

Standard : PTFE

Extension : PCTFE

PTFE

Gylon

1/2” , 3/4” , 1” , 1-1/2” , 2” , 3“ , 4”

Flanged End , Socket Welded , Butt Welded

BC7

1/2” , 3/4” , 1” , 1-1/4” , 1-1/2” , 2“

Socket Welded

C800 - Manual Operated Valve for Hyper-Cryogenic

HAITIMASpecification

05


Model : C800 SCS14A Extension Bonnet

Socket Welded Flange Type

LD

mm

15

20

25

40

50

inch

1/2”

3/4”

1”

1-1/2”

2”

Valve Socket Welded Flange Type

L

90

100

120

150

180

d

21.8

27.3

34.1

48.8

61.2

H2

296

296

306

361

374

H

319

324

340

407

429

H1

23

29

34

46

55

150

150

160

200

230

100

100

100

140

140

1

2

3

4

5

6

7

MaterialNo.

Handle Wheel

V-Packing

Bonnet

Plug Stem

Plug

Seat Ring

Body

ZDC 3

PTFE

SUS316

SUS316

SUS316

PCTFE

SCS14A

Part Name


HAITIMADimensions

06


Model : C800 SCS14A Standard Bonnet

LD

mm

15

20

25

40

50

inch

1/2”

3/4”

1”

1-1/2”

2”

Valve Socket Welded Flange Type

L

90

100

120

150

180

d

21.8

27.3

34.1

48.8

61.2

H2

217

217

227

283

296

H

240

246

261

329

351

H1

23

29

34

46

55

150

150

160

200

230

100

100

100

140

140

1

2

3

4

5

6

7

MaterialNo.

Handle Wheel

V-Packing

Bonnet

Plug Stem

Plug

Seat Ring

Body

ZDC 3

PTFE

SUS316

SUS316

SUS316

PCTFE

SCS14A

Part Name

Socket Welded Flange Type


HAITIMADimensions

07


HAITIMAMemo

control valve cryogenic - haitima valve... · m.a. roxas highway, clark freeport zone, clarkfield,...

Documents