- i -

2015 한국CAD/CAM학회 동계학술대회 Big Data와 Cloud 시대의 CAD/CAM/PLM

C CONTENTSONTENTS

HCI/HMISession 1

S1-1 햅틱 다이얼 인터페이스를 이용한 사용자 선호도 평가 ····················································································· 2송규예, 박완주, 김다혜, 권규현, 김래현(한국과학기술연구원)

S1-2 가상환경의 NUI기반 인터렉션에 관한 연구······································································································· 5김두범, Ajay Kumar G, 채영호(중앙대학교)

S1-3 다양한 자동화 수준을 갖는 자율주행차량의 운전자 인터페이스 개발······························································· 8엄휘수, 이상헌(국민대학교)

S1-4 운전자의 차선변경 의도 예측을 위한 최적의 머신러닝 기법 구성 ·································································· 11이명구, 이상헌(국민대학교)

Medical Applications ISession 2

S2-1 뇌혈종 제거 수술을 위한 무마커 수술 유도 로봇 시스템의 정확도 향상을 위한 캘리브레이션 기법 ············· 15박규식, 윤현민, 신상균, 조현철, 김영준, 김래현, 이득희(한국과학기술연구원)

S2-2 C-arm 영상 기반 척추 디스크 내시경 수술을 위한 가이드 바늘 삽입 보조 시스템····································· 22윤현민, 조현철, 박규식, 신상균, 이득희(한국과학기술연구원)

S2-3 수술 기록 모듈을 통해 생성된 Generalized Surgical Process Model에 관한 연구 ······································ 27황현태, 명재훈, 양웅, 이수홍(연세대학교), 박면웅, 권규현, 손영태, 김재관, 정다희(한국과학기술연구원)

S2-4 립모션을 활용한 모션 인식 치매 예방 프로그램 개발 ···················································································· 30양웅, 이지웅, 이수홍(연세대학교)

Modeling & SimulationSession 3

S3-1 차량용 고장력 일체형 임펙트 도어빔의 형상 설계 및 시뮬레이션 ·································································· 37윤태호, 김호윤(한국과학기술정보연구원), 허철(금창기술연구소), 권종완(경일대학교)

S3-2 중소기업 공학해석 자립화를 위한 공개라이브러리 기반 전처리기 시스템 개발 ············································· 42박형욱, 서동우, 윤태호, 손일엽(한국과학기술정보연구원), 김연호(쎄딕)

- ii -

S3-3 다시점 연속 이미지 기반 절지동물의 3차원 관절 자세 추정 ·········································································· 48황상철, 최영(중앙대학교)

S3-4 체감형 무선블록을 통한 3차원 형상 모델링 ···································································································· 55이승진, 손진원, 최영(중앙대학교)

Mechanical CADSession 4

S4-1 멀티 바디 CAD 모델과 전이 특징형상을 고려한 개선된 특징형상 기반 단순화 ············································· 59김병철(동아대학교), 문두환(경북대학교)

S4-2 Persistent Identification of Pattern Features inside a CAD Model ······························································ 62Shahjadi Hisan Farjana(한국과학기술원), 문두환(경북대학교), 한순흥(한국과학기술원)

S4-3 Shape Terra: 열지속특성을 응용한 CAD 피쳐 인식 도구 ·············································································· 65Ramy Harik(University of South Carolina), 백승엽(서울대학교), Barend-Jan Van Bruchem,

Michel Van Tooren(University of South Carolina)

S4-4 플랜트 유닛 수준의 대용량 3D CAD 조립체의 간략화 방안 ···········································································71권순조(한국과학기술원), 김병철(동아대학교), 박선아, 문두환(경북대학교), 한순흥(한국과학기술원)

S4-5 Hole-Pin-Slot 조립의 공차해석 알고리즘 기초 연구 ·······················································································75박준일, 최유현(홍익대학교), 박현풍(LG생산기술원), 임현준(홍익대학교)

나노복합구조물 금형가공 및 성형시스템Session 5

S5-1 광 복소변조를 위한 서브파장 스케일의 이진 격자 설계 및 해석 ····································································80김휘, 문은경, 임다정(고려대학교)

S5-2 기계적 가공기술 기반 3차원 이미지 구현 ········································································································84전은채(한국기계연구원), 이재령(고려대학교), 최대희(과학기술연합대학원대학교), 최환진(한국기계연구원),

이성웅(과학기술연합대학원대학교), 제태진, 김정환(한국기계연구원)

S5-3 나노구조를 가진 마이크로렌즈 어레이 몰드 제작기술······················································································87박용민, 장웅기, 김병희, 서영호(강원대학교)

S5-4 성형소재의 다단 나노패턴 구조색에 대한 영향································································································89유영은, 우상원, 윤재성, 최두선(한국기계연구원), 김선경(서울과학기술대학교), 박시환(울산과학대학교)

S5-5 사출 공정을 이용한 마이크로 패턴 성형 중 캐비티 가압에 의한 전사성 분석 ················································96박성호(서울대학교), 우상원(한국기계연구원), 유형민, 정재민(서울대학교),

유영은, 최두선(한국기계연구원), 이우일(서울대학교)

- iii -

Medical Applications IISession 6

S6-1 인공관절 마찰소음 해석 및 시험 검증···········································································································100최호일, 강재영(공주대학교)

S6-2 Segmentation of heart corresponding to coronary artery branches ·························································103차제현, 송찬영, 이목원, 김재관(한양대학교), 최진호(삼성서울병원), 김덕수(한양대학교)

S6-3 다구치 방법을 이용한 인공근육용 지능형연성복합재 구동기의 견실 설계 ·····················································113김민철, 김종원, 송지현, 김호진, 안성훈(서울대학교)

Modeling & Simulation/Robot ApplicationsSession 7

S7-1 조립생산라인의 자재공급을 위한 시뮬레이션 기반 버퍼 그룹핑 방법 ····························································117장대순, 박상철(아주대학교)

S7-2 역추적 기법을 활용한 산업용 유압호스의 가상 물성치 추정 ·········································································128양현모, 구본열, 최명환(한양대학교), 김태환(두산인프라코어), 김재정(한양대학교)

S7-3 불연속 반복운동의 동작연결을 위한 퍼지이론 기반 각속도 결정 방법 ··························································138기두찬, 김래현, 권규현(한국과학기술연구원)

S7-4 모바일기기를 활용한 쿼드콥터 자세제어 시스템 연구 ····················································································141LI RUNQI, 이경호, 이정민, 남병욱, WU YUEPENG, DONG CHANGKUN(인하대학교)

Design/ModelingSession 8

S8-1 KS 표준 기반의 압력용기의 설계 검증 ··········································································································143이재철(경북대학교), 김익준(한국원자력연구원), 문두환(경북대학교), 임채호(한국생산기술연구원), 황진상(부품디비)

S8-2 메쉬 디노이징을 위한 결합형 양방향 노멀 필터링·························································································146박민기, 이용이, 이관행(광주과학기술원)

S8-3 키넥트와 통계 모델에 기반한 특정 개인의 인체 외형 모델링 ·······································································154손세민, 구본열, 김재정(한양대학교)

디지털 생산Session 9

S9-1 지능 제조를 위한 혁신 시스템(Innovative System for Intelligent Manufacturing) ·········································159박홍석(울산대학교)

S9-2 시뮬레이션 기반 식품 제조 공정 개선 연구···································································································160박진우, 김덕영(울산과학기술대학교), 조용주(한국생산기술연구원)

- v -

CAESession 13

S13-1 공차영향계수법을 이용한 용접점의 위치, 개수, 순서 선정에 대한 연구························································236이동규, 조성욱(중앙대학교), 임현준(홍익대학교)

S13-2 진공단열유리의 모서리 효과 감소를 위한 수치해석적 연구 ···········································································242이욱진(중앙대학교), 송태호(한국과학기술원), 조성욱(중앙대학교)

S13-3 다물체계 동역학 시뮬레이션을 위한 실시간 물리엔진의 조사와 비교 ····························································248김임규, 안지만, 한순흥(한국과학기술원)

S13-4 Delta형과 Tadpole형 삼륜차의 선회안정성 해석···························································································251이창주, 박아론, 임현준(홍익대학교)

PLM/DesignSession 14

S14-1 전사 PLM 시스템 구현 프로세스····················································································································256명세현(영산대학교)

S14-2 협업 설계 과정에서 3D 모델의 실시간 공유를 통한 회의 및 의사 결정을 위한 웹 모듈의 개발 ·················264LU JIAQI, 김성호, 황현태, 이수홍(연세대학교)

S14-3 심해저 해양플랜트 매니폴더 파이프의 설계 및 응력 해석 ·············································································267곽시영, 홍준호(한국생산기술연구원)

S14-4 3D Model을 이용한 선체 두께 관리 시스템 개발 ·························································································276박개명, 길우성, 이정렬(한국선급), 이경호(인하대학교)

KMU-GM PACE 프로젝트특별세션

01 Global Project - Reconfigurable Shared-Use Mobility System(RSMS)

김상구, 최웅철, 송인호(국민대학교)

02 CiC Project A - Universal Vehicle

최린, 최세준, 이성욱(국민대학교)

03 CiC Project B - Reconfigurable Vehicle for All

이승민, 이찬민, 최웅철, 김흥규(국민대학교)

04 CiC Project C - Passenger Car with Easy Access

전태운, 성낙원, 이상헌(국민대학교)

- iv -

S9-3 Decision Support for Production System Design ························································································164박상철(아주대학교)

S9-4 모델링&시뮬레이션 자동화를 통한 사용자 중심의 지속적인 디지털생산 적용 ···············································165노상도(성균관대학교)

HCI/HRISession 10

S10-1 자연스러운 인간-로봇 상호작용을 위한 소셜스킬 개발 ·················································································167장민수, 박천수, 이대하, 김재홍(한국전자통신연구원)

S10-2 광역 병원 환경을 위한 물류 배송 로봇 개발 ·································································································177이재연, 전서현, 박찬규, 이주행, 김재홍(한국전자통신연구원)

S10-3 간단한 기구부와 결합한 공간증강현실 시스템의 샘플 기반 제어 방법 ··························································187이아현(과학기술연합대학원대학교), 이주행(한국전자통신연구원)

S10-4 사각형 복원을 위한 새로운 기하학적 도구로서의 선분 카메라 쌍 ·································································196이주행(한국전자통신연구원), 이아현(과학기술연합대학원대학교)

Big Data/데이터베이스Session 11

S11-1 빅데이터를 활용한 가구특성별 주거입지 및 주택유형 선택에 관한 데이터베이스 구축 ································202백민호, 오대식, 전한종(한양대학교)

S11-2 비정형화된 문서간 추적성 분석 및 그 가시화 방안 제시··············································································208김은희(세종대학교), 안경익, 송덕용(부품디비)

S11-3 IMMS 데이터 재사용을 위한 설계-계측 데이터 비교 기반 SW개발······························································211김환석, 송덕용, 황진상(부품디비), Young-Chan Park(The Williams Companies), 황호진(한국해양과학기술원)

S11-4 해상감시레이더의 RAM값 산출을 위한 OMS/MP 분석 ··················································································215조강훈, 박상철(아주대학교)

3D Printing & ScanningSession 12

S12-1 3차원 금속프린팅 적층을 위한 조형형상파트 자동분할 ··················································································221이규복, 류수아, 지해성(홍익대학교)

S12-2 레이저 소결 방식3D 프린팅 시스템에서의 최적 치수 보정 프로세스 연구····················································225한휘영, 하상호, 김남훈(울산과학기술대학교), 김현남, 황철웅, 신현식, 박규종(GM Korea)

S12-3 치아형상을 고려하는 정렬방법을 사용한 실시간 3D 치아 스캐닝 ··································································231고민수, 박상철(아주대학교)

- v -

CAESession 13

S13-1 공차영향계수법을 이용한 용접점의 위치, 개수, 순서 선정에 대한 연구························································236이동규, 조성욱(중앙대학교), 임현준(홍익대학교)

S13-2 진공단열유리의 모서리 효과 감소를 위한 수치해석적 연구 ···········································································242이욱진(중앙대학교), 송태호(한국과학기술원), 조성욱(중앙대학교)

S13-3 다물체계 동역학 시뮬레이션을 위한 실시간 물리엔진의 조사와 비교 ····························································248김임규, 안지만, 한순흥(한국과학기술원)

S13-4 Delta형과 Tadpole형 삼륜차의 선회안정성 해석···························································································251이창주, 박아론, 임현준(홍익대학교)

PLM/DesignSession 14

S14-1 전사 PLM 시스템 구현 프로세스····················································································································256명세현(영산대학교)

S14-2 협업 설계 과정에서 3D 모델의 실시간 공유를 통한 회의 및 의사 결정을 위한 웹 모듈의 개발 ·················264LU JIAQI, 김성호, 황현태, 이수홍(연세대학교)

S14-3 심해저 해양플랜트 매니폴더 파이프의 설계 및 응력 해석 ·············································································267곽시영, 홍준호(한국생산기술연구원)

S14-4 3D Model을 이용한 선체 두께 관리 시스템 개발 ·························································································276박개명, 길우성, 이정렬(한국선급), 이경호(인하대학교)

KMU-GM PACE 프로젝트특별세션

01 Global Project - Reconfigurable Shared-Use Mobility System(RSMS)

김상구, 최웅철, 송인호(국민대학교)

02 CiC Project A - Universal Vehicle

최린, 최세준, 이성욱(국민대학교)

03 CiC Project B - Reconfigurable Vehicle for All

이승민, 이찬민, 최웅철, 김흥규(국민대학교)

04 CiC Project C - Passenger Car with Easy Access

전태운, 성낙원, 이상헌(국민대학교)

- vi -

Ship CAD ISession 15

S15-1 조선소 생산 작업 지원을 위한 VR 기반 협업 시뮬레이션에 관한 연구 ························································282Xing Li, 함승호, Luman Zhao, 하솔, 노명일(서울대학교)

S15-2 해양 플랜트 상부의 통합 배치 최적화 방법에 관한 연구 ··············································································287김성균, 김기수, 홍정우, 하솔, 노명일(서울대학교)

S15-3 해저 저질과 환경 하중을 고려한 침몰 선체 인양 시뮬레이션·······································································292김주성, 함승호, 김기수, 이혜원, 노명일, 하솔(서울대학교)

S15-4 해양 플랜트 3D CAD 모델 비교를 위한 히스토그램 기반 방법 적용 ···························································300김형기(한국과학기술원), 천상욱(대우조선해양), 문두환(경북대학교), 한순흥(한국과학기술원)

S15-5 선박해양 운영단계 정보 교환을 위한 정보 프로토콜 및 파서 연구 ·······························································303김윤희, 황호진(한국해양과학기술원)

건축/BIMSession 16

S16-1 국내 BIM발주 건축 현상공모경기의 Green BIM Data 활용 현황 분석 ··························································309이주식, 추승연, 이권형, 류정림, 이윤정(경북대학교)

S16-2 개방형BIM기반 에너지성능평가를 위한 BIM모델 호환의 문제점 분석 및 개선방안 제시 ·······························313김민찬, 최중식, 김인한(경희대학교)

S16-3 인천국제공항 통합공간관리 시스템 프로젝트를 통한 3D 공간관리시스템에 관한 연구·································316김언용(한국가상현실)

Digital Manufacturing ISession 17

S17-1 중소 제조기업을 위한 스마트공장 구축··········································································································323오요셉, 이주연, 윤주성, 김보현(한국생산기술연구원)

S17-2 CAD Model 기반 통계적 공정관리 프레임워크 ······························································································333김성호, 이지웅, 이수홍(연세대학교)

S17-3 3D 프린팅을 이용한 소비제품의 프로슈머형 재구성······················································································336유병현, 고희동(한국과학기술연구원), 전성국(과학기술연합대학원대학교)

나노 마이크로 시스템Session 18

S18-1 LIQUID LENS BASED ON ELECTROMAGNETIC ACTUATION FOR

HIGH-PERFORMANCE MINIATURE CAMERAS ·························································································359오상훈, 서정화, 전진표, 정상국(명지대학교)

- vii -

S18-2 Enhancement of the response time of EWOD actuation using overdrive voltage ···································363홍성진, 채정병, 서희원, 정상국(명지대학교)

S18-3 A NOVEL ACTUATOR FOR ENERGY SCAVENGING USING AN ACOUSTICALLY ····································366OSCILLATING LIQUID DROPLET

전진표, 이영랑, 정상국(명지대학교)

S18-4 Hydrophobicity characterization study based on film thickness ································································369채정병, 홍성진, 박용태, 서성민, 정상국(명지대학교)

S18-5 A NOVEL ON CHIP MICRO SEPARATING METHOD USING AN

ACOUSTICALLY AND OPTICALLY EXCITED BUBBLE ··············································································372서정화, 오상훈, 전진표, 정상국(명지대학교)

S18-6 MICRO MIXER WITH ACOUSTIC EXCITATIONAND MAGNETIC DROPLET MANIPULATION ······················376이강용, 전진표, 이영랑, 홍성진, 정상국(명지대학교)

Ship CAD IISession 19

S19-1 선박 및 해양구조물 블록 리프팅 작업을 위한 유연 다물체 동역학 기반의

구조 해석 시스템 개발 및 검증 ···················································································································380정다운, 차주환, 송창용(목포대학교), 박남수, 임정대, 정창환, 이충형, 고민성(현대삼호중공업)

S19-2 해상풍력발전의 이산사건 이송/설치 시뮬레이션 및 가시화모듈 구현 ····························································389장왕석, 김보람, 김태완(서울대학교)

S19-3 배관 시스템의 설계정합성 검정을 위한 자동 검사법·····················································································394Tharun Kumar Parepalli, 유원철, 김태완(서울대학교)

S19-4 실제 운전 조건에서 성능 검사를 위한 ECU 시험 모델링 방법 ·····································································400박지명, 함원경, 정용호, 박상철(아주대학교)

S19-5 3차원 위치 측정을 위한 휴대용 레이저 거리 측정기 활용 방안 연구 ···························································406구본재, 이경호, 박개명, 남병욱(인하대학교)

Bio/Nano-CADSession 20

S20-1 MGOS : 분자기하학 운영체제························································································································408이목원, 차제현, 송찬영, 조영송, 김재관, 김덕수(한양대학교)

S20-2 원의 보로노이다이어그램을 이용한 2차원 입자 시뮬레이션···········································································416송찬영, 이목원, 차제현, 유중현, 김덕수(한양대학교)

S20-3 변형되지 않은 상태의 3차원 혈관 모델링 방법 ·····························································································427손진원, 최영(중앙대학교)

S20-4 스미스 머신을 이용한 스쿼트 동작에 대한 관절의 상관관계를 고려한 근골격 모델 생성 ·····························431이해린, 김혜리, Gizem Ozkaya(국민대학교), 정문기(Anybody Technology), 이기광, 이상헌(국민대학교)

- viii -

Digital Manufacturing IISession 21

S21-1 해양플랜트 수명주기 가시화 시스템을 통한 프로세스 최적화 및 시뮬레이션에 관한 연구 ···························435이용길, 우종훈(한국해양대학교)

S21-2 중립파일 기반의 멀티 조선소 시뮬레이션 환경 구축에 관한 연구 ·································································442윤경원, 우종훈(한국해양대학교)

S21-3 활용 엔지니어링 업무를 고려한 디지털 가상공장 정보모델의 체계적인 설계방법에 관한 연구 ····················456전석호, 정진우, 노상도, 조문빈, 박서현, 임종완(성균관대학교)

S21-4 조선소 생산공정 시뮬레이션 결과의 보고서 생성 모듈 개발 ·········································································462이필립,최양열(지노스)

건축물 설계품질 혁신을 위한 개방형BIM 기술 환경 구축Session 22

S22-1 개방형BIM기반의 설계품질향상 지원시스템 개발 ····························································································465장재문, 최중식, 김인한(경희대학교)

S22-2 개방형 BIM 기반 설계품질 자동검증 프로그램 개발 ······················································································468양승원, 손영석, 강성종, 유석준(석영시스템즈)

S22-3 설계맥락을 고려한 BIM과 BEM간 정보교환 ···································································································471이동혁, 최원욱, 박철수(성균관대학교)

S22-4 BIM 표준설계도서의 견본도서세트 리뷰·········································································································472전두호(해안건축)

S22-5 BIM기반 표준설계도서 추출 및 연동 프로그램·······························································································492김구택(코스펙이노랩)

Dimensional Engineering in Shipbuilding and Offshore Industries ISession 23

S23-1 레이저 거리 측정기를 활용한 스마트 정도 관리 기술 ···················································································498이경호(인하대학교)

S23-2 선체 외판 성형 자동화를 위한 형상 유사도 평가 방법··················································································506박정서, 문승환, 현충민, 강병권, 김경수(삼성중공업), 고광희(광주과학기술원)

S23-3 블록 탑재정도 분석 시스템 소개····················································································································507최형순(인포겟시스템)

- ix -

국방M&S ISession 24

S24-1 시뮬레이션을 이용한 UGV 운용성능과 전투효과의 상관관계 분석 ·································································519이재영, 김종만, 김준수, 신선우 (명지대학교)

S24-2 반능동 현가장치를 통한 지상전투차량의 포의 진동저감 연구 ········································································520송재복, 박강(명지대학교)

S24-3 관통메커니즘을 고려한 지상 전투차량의 피격선 분석····················································································525유철, 장은수, 박강, 최상영(명지대학교)

S24-4 몬테 카를로 방법에 의한 체계명중률 해석에 관한 연구 ················································································531강환일, 김현수(명지대학교)

S24-5 대지상전투차량용 탄두의 관통피해 평가방법론······························································································536장은수, 박강, 최상영(명지대학교)

ErgonomicsSession 25

S25-1 Kinect를 이용한 사용자 동작 기반의 애니메이션 구현 프레임워크에 관한 연구 ···········································544손권, 이전일, 김윤배, 전찬모, 박승현, 이주형, 노상도(성균관대학교)

S25-2 애니메이션 캐릭터의 자연스러운 움직임 구현을 위한 Kinect 인식 동작의 보정에 관한 연구 ······················547조재탁, 이전일, 김상은, 김백섭, 황다혜, 공현웅, 노상도(성균관대학교)

S25-3 인체 동작시 관절 부하에 대한 허용 능력 평가 시스템 ··················································································551최우성, 김영욱, 이건우(서울대학교)

S25-4 종합 안전지수평가체계 수립을 위한 스마트디바이스 기반 HSE모니터링 시스템에 관한 연구······················555함동균, 임현규, 우종훈(한국해양대학교)

Virtual/Augmented RealitySession 26

S26-1 RGB-D 센서를 이용한 가상 방송 제작 시스템······························································································563이용이, 박민기, 김용휘, 이종훈, 최준호, 이관행(광주과학기술원)

S26-2 서브픽셀분류를 활용한 프로젝터-카메라 대응관계 향상기법·········································································569임규제, 박민기, 이용이, 최준호, 이종훈, 이관행(광주과학기술원)

S26-3 실감 상호작용형 프로젝션 맵핑 기술 ·············································································································578박민기, 최준호, 김용휘, 이관행(광주과학기술원)

S26-4 수치지도 구속조건과 파노라마 이미지 분석을 통한 효율적인 3D 건물 모델링 시스템·································586김형기(한국과학기술원), 강윤아(국방과학연구소), 한순흥(한국과학기술원)

- x -

개방형 BIM기반의 건축물 설계표준 및 인프라 구축Session 27

S27-1 BIM 지침 통합관리를 위한 BIM 데이터 작성기준 개발에 관한 연구·····························································590이민재, 한지수, 이세잎, 조찬원(빌딩스마트협회)

S27-2 분야별 공통원형 BIM 라이브러리 DB ·············································································································593조준원, 윤두영, 김흥수(디티콘건축사사무소)

S27-3 중·소규모 건축사사무소 업무환경 지식정보기반 활용수준에 대한 진단 및 처방에 관한 연구····················597김진환, 우치문, 전한종(한양대학교)

S27-4 지식기반 시스템 분석을 통한 지식체계에 관한 고찰 ·····················································································604이병수, 이종덕, 전한종(한양대학교)

S27-5 BIM 프로세스 성숙도 측정 모델의 개발방향에 대한 연구··············································································611이재성, 김민웅, 옥종호(서울과학기술대학교)

Dimensional Engineering in Shipbuilding and Offshore Industries IISession 28

S28-1 조립 중 변형을 고려한 공차해석 기법 소개···································································································619임현준(홍익대학교)

S28-2 용접변형과 패턴을 고려한 변형조립체의 공차해석 및 진단모델 ····································································638이정현, 강민석, 정현(한국과학기술원)

S28-3 ITER 진공용기 제작시 Global 변형 제어에 관한 연구···················································································651김하근, 강봉국, 신상범(현대중공업)

국방M&S IISession 29

S29-1 직렬 하이브리드 전투 차량용 인휠 모터 모델링 ····························································································653김대기, 김동민, 채승희, 홍정표(한양대학교), 안병준, 변재정(국방과학연구소)

S29-2 동력체계를 고려한 전투차량의 기동성능 분석 모델 개발··············································································656임성훈, 임우철, 김동민, 민승재, 이태희, 홍정표(한양대학교)

S29-3 화력과 기동성능의 크리깅 대체모델을 이용한 전투차량의 통합최적설계 ·······················································658임우철, 김신유, 이태희, 임성훈, 민승재(한양대학교)

S29-4 6륜 독립 구동형 야지 기동 차량의 동역학 해석모델 개발 ············································································662김관영, 김민혁, 오현환, 장은수, 박강, 이수진(명지대학교)

S29-5 휠-토양 상호작용 분석을 위한 DEM모델 토양 정수 도출 ·············································································668장기찬, 오현환, 최민석, 이수진, 이규진(명지대학교)

- xi -

TRIZ/기타Session 30

S30-1 디지털 싱킹 프로세스 상에 Quick TRIZ를 활용한 차세대 셀카봉 아이디어 도출 ·········································679이경원(한국산업기술대학교)

S30-2 임베디드 피드백 컨트롤 시스템에 대한 시뮬레이션 기반의 FMEA와 통계적 Fault Tree 분석 ·····················685백운상, 백수정, 김덕영(울산과학기술대학교)

S30-3 Wafer FAB의 납기 달성 향상을 위한 연구····································································································691안의국, 장대순, 박상철(아주대학교)

S30-4 가상 투명디스플레이 구현을 위한 시계 정합 알고리즘 ··················································································696남병욱, 이경호, 김대석, 구본재(인하대학교)

Computer GraphicsSession 31

S31-1 포인트 클라우드를 이용한 파이프라인 자동 모델링 과정··············································································698박성실, Ashok Kumar Patil, Pavitra Holi, 채영호(중앙대학교)

S31-2 카메라 기반 책상 결합형 디지털 수기 시스템·······························································································701Bilal Ahmed, 이용이, 이관행(광주과학기술원)

S31-3 메쉬 간략화를 이용한 충돌검출 알고리즘······································································································707임영현, 장태정 (강원대학교)

- xii -

포스터 세션

P-01 실내공기 미세먼지농도의 시각화를 위한 통합적 구현방법 ·············································································711이현수, 이상익, 정영택, 이진국(한양대학교)

P-02 BSIM기반 안전관리 통합플랫폼의 마크업 시스템 개발방안 연구···································································714조동완, 손영석, 최상덕(석영시스템즈)

P-03 개방형BIM기반 법규정보 검토 기준의 구조화 방안 연구···············································································717최중식, 장재문, 김민찬, 김정아(경희대학교)

P-04 변단면 슬립폼 시스템에 대한 3D 파라메트릭 설계 기법의 단계별 적용 ·······················································719유봉영, 김동욱, 이광명(성균관대학교), 윤혜진, 김영진(한국건설기술연구원)

P-05 BIM기반설계 자동검토를 위한 건축법규문장 스크립트언어 변환프로세스 ······················································722이현수, 박서경, 이상익, 신재영, 김현정, 이진국(한양대학교)

P-06 BIM기반 설계품질검토 자동화 구현을 위한 건축법규 문장 논리규칙 체계화 접근방법 ·································725이진국, 이현수, 박서경, 이상익, 신재영, 김현정(한양대학교)

P-07 BIM기반의 냉난방설비 설계 지원 모듈 개발··································································································728김한주, 최명환, 최동권(한양대학교), 조상은, 박정열(LG전자), 김재정(한양대학교)

P-08 Visible Korean의 CT 영상에서 뼈의 3차원 형상 재구성 ···············································································731김병철(동아대학교), 문두환(경북대학교)

P-09 실외형 하향식 피난구의 구조적 안전성을 위한 구조 및 진동해석 ·································································735서영수, 이형수(전북대학교자동차 부품금형기술혁신센터), 한정권(에스엠ENG),

김주미(에스엠텍), 양균의(전북대학교)

P-10 이중각도 분사 방식에 의한 고효율 고압 믹싱 헤드 연구와 최적화 ·······························································739김슬기, 전언찬, 하동승, 박세종, 안광우(동아대학교), 이찬우(세화엠피)

P-11 Al6061 드릴가공에서 선단각에 따른 절삭특성에 관한 연구 ···········································································742정주상, 전언찬, 박병훈, 김세민(동아대학교), 성기찬(세화엠피)

P-12 피니싱 툴 유니트의 에어 임펠러 설계에 관한 연구 ·······················································································745최현진, 강익수, 이승용, 장은실, 박선명(대구기계부품연구원), 최성대(금오공대)

P-13 소방특수차량의 차륜용 원추형 베어링 시스템 설계 및 수치해석 ··································································751남지우, 조성욱, 유홍선(중앙대학교), 이우준(화담 알앤알), 김형준(홍인)

P-14 태양열 집열시스템의 구조부 설계 및 제작에 관한 연구················································································754손창우, 송기환, 서태일(인천대학교), 강희천(우남산업)

P-15 유한요소법을 이용한 Ti-6Al-4V의 선삭가공 최적화에 관한 연구 ·································································757황선호, 전언찬, 박주석, 김태호, 김재훈(동아대학교), 정은익(세화엠피)

P-16 FEM을 이용한 군용 사격통제장치의 격발충격, 진동 시뮬레이션과 안전성 평가 방법 ···································760최성, 이성민(이오시스템), 이후민(성균관대학교)

P-17 유압 호스의 경로 생성을 위한 인터페이스 개발 ····························································································761김태준, 최명환, 김재정(한양대학교)

- xiii -

포스터 세션

P-18 열응력 제어층을 가진 하드페이싱된 STD61 금형강의 열응력제어층 형상에 따른

기초 열전달/열특성 분석·····························································································································764국대선, 안동규, 이호진(조선대학교)

P-19 3 차원 사출성형 해석을 통한 냉장고 부품 성형금형의 냉각채널 및 런너시스템 설계에 관한 연구 ·············766김동인, 안동규, 이호진(조선대학교)

P-20 유동해석을 통한 스크롤 압축기 성능에 관한 연구·························································································768박철우, 최현진, 박선명(대구기계부품연구원), 김종목(제이케이티)

P-21 유한요소법을 이용한 비공기압바퀴의 구조해석에 관한 연구 ··········································································771손창우, 서형진, 서태일(인천대학교), 유화열, 박성학, 김경훈(코휠)

P-22 원자력 발전소 주증기 배관에서의 상대변위를 고려한 응력 평가법 개발 ·······················································774박진성, 류태영, 서한범, 김민규, 최재붕, 김문기(성균관대학교), 안은우(한국전력기술)

P-23 협동최적화(CO) 기법을 적용한 레저선박의 선형설계 최적화 시스템의 프레임워크 구성 ······························778안동현(서울대학교), 이필립(지노스) 신종계(서울대학교)

P-24 가스설비 관리를 위한 비콘 시스템 적용방안 연구·························································································782홍경표, 김주동, 오승혁, 강석준, 김민규, 홍진원, 최재붕, 김문기(성균관대학교), 윤익근, 이영석(한국가스공사)

P-25 가상 플랜트 안전훈련시스템 기술 타당성 연구······························································································786김형진, 박찬국(고등기술연구원)

P-26 베이지안 프레임워크 기반 인공신경망을 이용한 전략적 컨셉 선정 방법론 ···················································792한순영, 이윤하, 최해진(중앙대학교)

P-27 귀납적 설계 전개법을 활용한 발포 알루미늄 샌드위치 패널의 강건 설계 ·····················································793장성우, 서석훈, MinhDuc Do, 최해진(중앙대학교)

P-28 Design for Assembly Process for Electronic Home Appliances to Increase Assemblability ···················794박홍석, Rima Shah(울산대학교)

P-29 생존성 기반 함정 공간배치 평가를 위한 Fuzzy AHP 접근법 ········································································797주수헌, 정용국, 정진욱, 김영민, 신종계(서울대학교)

P-30 Green Ship 기술 및 규제 관리를 위한 Generic-GSWBS 설계····································································801이정호, 남승훈, 주수헌, 김영민, 신종계(서울대학교)

P-31 웹기반 UX 경량화를 위한 조선소 계획 시스템의 정보 구조 분석 ·································································806이필립, 박대희, 박영미, 최양열(지노스)

P-32 조선소 생산 시뮬레이션 공용 모듈 개발을 위한 정보 구조 분석 ··································································809이필립, 권기욱, 최양열(지노스)

P-33 모션캡쳐를 이용한 걸음걸이 중의 동적 Q-angle의 남녀 차이······································································812한선혜(성균관대학교), 권정훈(차세대융합기술연구원)

P-34 한 손 휴대폰 사용 시 기기 크기에 따른 화면에서의 접촉지점 분석 모델 제시 ············································818김영욱, 전은찬, 최우성, 이건우(서울대학교)

- xiv -

포스터 세션

P-35 병사 훈련을 위한 2차원 트레드밀 기반 이동 인터페이스 개념 설계 ·····························································821차무현(한국기계연구원)

P-36 멀티 스마트폰을 활용한 매트릭스 형태의 디스플레이 생성 및 상호작용 ·······················································825김민석, 이재열(전남대학교)

P-37 CAD/CAM을 이용한 안경형 웨어러블 디바이스의 기능적 설계 ·····································································827김병남, 기두찬, 이충기, 김수지, 김래현, 권규현(한국과학기술연구원)

P-38 ICT 기반 공장지붕용 스마트 윈도우 시스템 설계에 관한 연구······································································830서형진, 손창우, 서태일(인천대학교), 한재길, 강인철, 박욱기(인천테크노파크), 박병곤(신명전기)

P-39 기자재 3D CAD 데이터의 간략화를 위한 UG NX의 3D CAD 단품 데이터 추출 ·········································833박선아(경북대학교), 김병철(동아대학교), 이주호(스페이스솔루션), 문두환(경북대학교)

P-40 스케치 기반 특징형상의 스케치 단순화를 이용한 개선된 특징형상기반 단순화 ············································836윤여운, 김병철(동아대학교)

P-41 최적설계 및 동역학 해석 기반의 SMD 릴 뱅크 로봇 개발 ············································································839김병수, 조지승, 김진대(대구기계부품연구원), 이재익(은일), 이상화(영진전문대학교)

P-42 간섭계를 이용한 금속물체의 3차원 형상 측정·······························································································848조영목, 장민호(고려대학교)

P-43 원격 바늘생검을 위한 자동생검장치 및 프로세스 개발 ··················································································851문영진, 김성준, 최송이, 최재순(서울아산병원)

P-44 복셀 세선화를 이용한 인체혈관의 3차원 골격 곡선 생성 방안 ·····································································852박상진(조선대학교), 박형욱, 이상민(한국과학기술정보연구원), 박형준(조선대학교)

P-45 메쉬 모델 상의 동적 윤곽선 모델을 위한 초기 폐곡선 생성·········································································856이주성, 임정훈, 이건우(서울대학교)

P-46 3D 프린팅을 활용한 인공슬관절 전치환술 계획수립······················································································860전용태, 임은하(세종대학교)

P-47 펜 타블릿을 이용한 3D 모델링 상호작용 방법에 관한 연구 ··········································································864한정호, 전혜성, 양정삼(아주대학교)

P-48 발사체 엔진 김발 시뮬레이션 ·························································································································872정동호, 이수진, 이영무(한국항공우주연구원)

P-49 시편 표준화를 적용한 선반 공작기계의 절삭 소비 전력 모델 구축·······························································875신용준, 이장엽, 김민수, 김은섭, 윤해성, 안성훈(서울대학교)

P-50 친환경 가공을 위한 밀링 머신의 에너지 소비 모델 구축과 그 활용 방안 ····················································879김민수, 안성훈, 윤해성, 이장엽, 김은섭, 신용준, 김성용(서울대학교)

P-51 CNC 선반의 에너지 소비 평가 방법을 이용한 에너지 소비량 모델링 ···························································880이장엽, 안성훈, 신용준, 김은섭, 김민수, 윤해성, 김성용(서울대학교)

P-52 원전 형상관리를 위한 설계기준정보 관리방안································································································881안경익(부품디비), 박유진, 조윤상(한수원 중앙연구원)

- xv -

포스터 세션

P-53 국제표준 라이브러리를 활용한 해양플랜트 기자재 관리방안 연구 ·································································882김환석, 안경익, 황진상(부품디비), 한은정, 이정렬(한국선급)

P-54 디지털 조선소를 위한 정보화전략계획과 요구공학의 통합 정보 구조 분석···················································888이필립, 최양열(지노스)

P-55 다중 에이전트 스케줄링을 통한 에이징 효과를 갖는 혼류 생산 라인 일정계획 ············································890김도균, 최진영(아주대학교)

P-56 모델 기반 개발 프로세스를 해양플랜트 System Integration에 적용 및 지원하기

위한 방법론에 관한 연구·····························································································································915김병섭, 안동현, 신종계(서울대학교)

P-57 경사기능재료의 레이저 적층조형을 위한 제조시간 평가 ················································································918신기훈, 허태현(서울과학기술대학교)

P-58 건설용 쾌속조형기술 동향조사 및 분석 ··········································································································920서명배, 문진석(한국건설기술연구원)

P-59 대형 건축물 제작을 위한 타워크레인과 결합된 3D 프린터 ············································································923최준호, 장인석, 곽표, 전영훈, 권혁상, 이관행(광주과학기술원)

P-60 AFN printing과 FIB를 사용하는 나노스케일 3차원 프린팅 공정용 통합 CAD/CAM ·····································926윤해성, 장기환, 김은섭, 이현택, 박현서, 김대욱, 김충수, 이길용, 이건우, 안성훈(서울대학교)

P-61 집속이온빔을 이용한 마이크로 밀링 툴의 제작 CAD/CAM ···········································································927이현택, 윤해성, 김은섭, 김충수, 안성훈(서울대학교)

P-62 3D 프린터를 이용한 자동차 외판 특징선 시편 제작 ······················································································928한주호, 정연찬(서울과학기술대학교)

P-63 3차원 소프트리소그래피를 이용한 비틀림 지능연성복합재구동기의 제작 ·······················································933Hugo Rodrigue, Wang Wei, 한민우, 안성훈(서울대학교)

P-64 생체모방 연성 자벌레모사 로봇 구조의 설계 및 제작 ···················································································936Wang Wei, Hugo Rodrigue, 한민우, 안성훈(서울대학교)

P-65 난삭재 심공가공용 BTA 공구 제조를 위한 분말사출성형 기술 연구 ·····························································939정희진(경북하이브리드부품연구원), 김승진, 배대열(씨엠티)

P-66 로봇 수술에서의 Optical Flow 알고리즘을 활용한 도구 추적········································································940김대관, 최재순, 최바름, 박상훈(서울아산병원)

P-67 마이크로 드릴비트의 워터젯 세척 로봇시스템의 공정 시뮬레이션 분석에 관한 연구 ····································943국연호, 박상록(인스턴), 박기진, 최현진(대구기계부품연구원)

P-68 3D Printing 기술을 이용한 일체형 휠-레그 모바일 로봇설계 ········································································949박정진, 장태호, 김영식(국립한밭대학교)

P-69 3D 프린팅을 활용한 생체모사 구동기 제작 방법·························································································952송성혁, 김민수, 김민철, 추원식, 안성훈(서울대학교)

- xvi -

포스터 세션

P-70 선박용 프로펠러 주물제작용 후란주형 모델링 및 가공 ··················································································953박정환(영남대학교), 정창욱(현대중공업), 석진규(영남대학교)

P-71 고주파 열처리 복합툴 및 여유자유도 로봇시스템을 적용한 금형 열처리 자동화 공정 개발 ·························957박기진(대구기계부품연구원), 김용식(화신테크), 윤성호(금오공과대학교)

P-72 가오리 유영 모사를 위한 생체 모사 로봇 설계 ······························································································960김형수, 추원식, 이장엽, 안성훈(서울대학교)

P-73 Aveva Marine과 Smart Marine 3D의 해양 플랜트 3D 설계 모델의 자동 비교를 위한

유사도 평가 척도의 개발·····························································································································961이재선(경북대학교), 김병철(동아대학교), 김형기(한국과학기술원), 천상욱, 조민철,

이광(한국과학기술원), 문두환(경북대학교), 한순흥(한국과학기술원)

P-74 곡면가공정보 생성을 위한 NURBS 곡면 수정방법 기반의 선체 외판 모델링················································964이동규, 손승혁, 김영민, Hui qiang Shen, 신종계(서울대학교)

P-75 다양한 형식의 플랜트 3D CAD 데이터의 ISO 15926 기반 표현 방법 ··························································968박상진, 전영준(경북대학교), 김병철(동아대학교), 문두환(경북대학교)

P-76 사실적인 특수 효과 연출을 위한 고연색성 LED조명시스템 ············································································972김회민, 정광현, 김상유(한국광기술원)

P-77 스마트 트랜스포터··········································································································································975임규제, 조동래, 장훈석, 김혜민, 이관행(광주과학기술원)

P-78 일차원 부재의 효과적인 배치알고리즘에 관한 연구 ·······················································································978소범식, 최창환(그린카부품진흥원), 이성규, 이성건(KL Tech)

P-79 스마트폰을 이용한 자동 수평 조절 장치 ········································································································981이종훈, 신현덕, 송가람, 부민철, 이병근, 이관행(광주과학기술원)

P-80 CNC 가공부하 예측 및 모니터링 시스템 ·······································································································984이철수, 허은영(서강대학교), 이동윤(한국생산기술연구원), 김종민(서강대학교),

이희관(전북대학교 자동차부품금형혁신센터)

P-81 형상기억합금 기반 스마트 직물의 설계 및 제작 ····························································································987한민우, 김형일, 송성혁, 안성훈(서울대학교)

P-82 선박 블록 감지와 자세 추정 및 증강현실 ······································································································988김대운, 지중현, 윤동호, 안형갑, 송가람, S.M. Abid Hasan, Mamona Awan, 고광희(광주과학기술원)

P-83 Unity와 Leap Motion을 이용한 디지털 제품의 웹 기반 3D 가상시작 방안 ··················································992정호균, 박형준(조선대학교)

P-84 Unity와 Leap Motion을 이용한 곤충 체험용 3D 콘텐츠 생성 ·······································································996김준성, 김수민, 정호균, 김희영, 박형준(조선대학교)

P-85 신뢰성 분석 데이터 기반 3D가시화 방안 연구 ····························································································1000배성훈, 황진상(부품디비), 차무현(한국기계연구원)

P-86 차량 시험을 위한 야지노면 처리 기법 연구·································································································1004최민석,정영진(명지대학교)