consumables and accessories for icp and · pdf filemarch 2009 consumables and accessories for...

March 2009

Consumables and Accessories for ICP and ICPMS

www.meinhard.com

Meinhard Glass Products A Division of Analytical Reference Materials International 700 Corporate Circle, Suite A Golden, Colorado 80401 USA

1.800.MEINHARD 303.277.9776 [email protected] www.meinhard.com

Superior Sample Introduction Components

Since 1974, MEINHARD® nebulizers have been the industry standard: the best performance; the best value. Today, Meinhard nebulizers are standard on the largest selling ICP and ICPMS instruments. Our High Efficiency Nebulizer is the top-rated glass microconcentric nebulizer. Our Direct Injection High Efficiency Nebulizer is unmatched.

Since 2003, we have offered all of our nebulizers in quartz as well as borosilicate glass, for more demanding low-background measurements. The new high-purity quartz, TQH series, became available in 2005. Designed primarily for ICPMS use, these will provide the lowest possible elemental background as demanded by the semiconductor industry.

Meinhard Glass Products wants to be your source for total sample introduction solutions. We are pleased to offer nebulizers in Teflon PFA and polypropylene from Elemental Scientific. These microconcentric nebulizers are especially useful for small-volume samples and highly-corrosive solutions like HF. The Noordermeer v-groove nebulizer can handle suspended solids of 10% or more without clogging. The Burgener MiraMist® in Teflon extends that capability to highly-corrosive solutions.

Meinhard Glass Products manufactures all kinds of spray chambers in glass and quartz: Scott double-pass, conical, cyclonic, double-pass cyclonic. We can fit your instrument or custom manufacture for your needs. We also offer Scott double-pass spray chambers from ESI in Teflon PFA for ultra-high-purity and corrosion resistance. ESI’s cyclonic spray chambers in polypropylene are just the thing for ICP analysis of HF solutions.

Meinhard Glass Products has torches for all ICP and ICPMS instruments that are currently available, along with torches for instruments that have been out of production for ten years or more. Our quality is guaranteed; our prices are unrivaled.

If you would like to talk to our sample introduction experts, call or email. We will be pleased to work with you to get the most out of your ICP or ICPMS.

The High Efficiency Nebulizer (HEN)

The HEN is especially well-suited for microsample analysis in µHPLC, CE, CIC and FIA. It exhibits detection limits comparable to those of a standard MEINHARD® nebulizer while consuming 25 times less sample (see table). It is designed to operate at 1 L/min argon and ~170 psig. The HEN can function reliability at liquid flow rates from 10 to 1200 µL/min. The HEN fits standard spray chambers. The high-pressure fitting (Fit Kit #2) is recommended for secure attachment of the nebulizer gas tubing. Chromatography unions (Fit Kits #1 and #1-Micro) are available to provide a minimum dead volume, leak-free connection to 1/16” column tubing. To order, request model HEN-170-AA.

Representative Detection Limits (µg/L) Ref. (1) TR-30-A2 HEN

Solution Flow Rate (µL/min): 1900 2000 80 Cu 324.7 5.4 3 3 Ni 231.6 15 5 5 Pb 220.3 42 20 20 As 193.6 53 30 40 Be 313.0 0.3 0.2 0.2

(1) R.K. Winge, V.A. Fassel, V.J. Peterson, and M.A. Floyd, “Inductively Coupled Plasma – Atomic Emission Spectroscopy, An Atlas of Spectral Information,” Elsevier, New York (1985)

The Direct Injection High Efficiency Nebulizer (DIHEN) The DIHEN is a pneumatic micronebulizer designed to introduce micro-volumes of sample solutions directly into an inductively coupled plasma (ICP) or inductively coupled plasma mass spectrometer (ICPMS). The DIHEN-ICPMS approach is particularly well suited for ultratrace isotope and elemental analysis of sample types that are of limited volume, toxic, or expensive, or that exhibit speciation interferences. The DIHEN may be used as a micronebulizer in other atomic spectroscopy techniques such as flame photometry. Two accessories well-suited for the DIHEN: The chromatography union, Fit Kit #1-Micro, is an easy and convenient method to reduce dead volume in the sample introduction system to less than 10 µL. The high pressure reducing union, Fit Kit #2, allows easy connection of a high-pressure Argon line to the sidearm of the DIHEN. Advantages of the DIHEN: The advantages of the DIHEN are its ability to introduce microvolumes into plasmas at 1-100 µL/min, with relatively small aerosol droplet size, and with nearly 100% use of the sample. It is also highly suitable for the analysis of volatile solvents, avoiding interferences which occur in conventional spray chambers. These and other characteristics of the DIHEN can be found in an Analytical Chemistry article titled: “A Direct Injection High-Efficiency Nebulizer for Inductively Coupled Plasma Mass Spectrometry,” J.A. McLean, Hao Zhang, and Akbar Montaser, Anal. Chem. 1998, 70, 1012-1020.

The MEINHARD® NEBULIZER

SPECIFICATIONS:Configurations: Concentric, monolithicMaterials: Borosilicate glass or quartzTubulation O.D.: Shell, 6mm; Fluid inputs, 4mmNozzles: See selection guide (above)Internal liquid volume: ~0.1 mLAnnular Separation at Nozzle: ~20 µmAnnular area: 0.03mm2

Capillary I.D.:TR-series 0.22 - 0.32mmHEN 0.10mm

Functional criteria:Pc: Calibration input pressure at rated Ar flowRa: Water aspiration at -5cm head, rated Ar flow

Pc (psig) Ra(mL/min)Nominal Range Nominal Range

20 10 - 24 0.5 0.3 - 0.6 30 25 - 40 1 0.7 - 1.450 41 - 60 2 1.5 - 2.4

3 2.5 - 3.5

NOZZLE SELECTION GUIDE:TYPE A

Application: General purposeCalibration reference: 1.0 L/min ArEnd surfaces: lappedCapillary tip recess, mm: 0.0Uptake suction: +Stability of aerosol delivery: +

TYPE CApplication: High solidsCalibration reference: 1.0 L/min ArEnd surfaces: vitreousCapillary tip recess, mm: ~0.5Uptake suction: ++Stability of aerosol delivery: ++

TYPE KApplication: Ar low-flowCalibration reference: 0.7 L/min ArEnd surfaces: lappedCapillary tip recess, mm: ~0.5Uptake suction: ++Stability of aerosol delivery: ++

MODEL DESIGNATION:TR-P

c-NR

aSubstitute A, C, or K for N to select Nozzle typeSubstitute nominal working pressure (20, 30, 50) for P.Substitute nominal aspiration rate (0.5, 1, 2, 3) for R.

Meinhard Glass Products700 Corporate Circle, Suite A, Golden CO 80401 USA

NEBULIZER OPTIONS: TQ Any Meinhard nebulizer is available in quartz. The A-type is available from stock.SB Replaces the standard 4 mm solution inlet with a 3 mm o.d and 0.7 mm i.d. solution inlet.

NEBULIZER ACCESSORIES:

Fit Kit #1

Union, ferrules, and Tefzel tubing (1/16”) to connect 1/16” sample tubing to Small Bore liquid input tube. A butt-fitting provides essentially continuous inside diameter between the sample tubingand the solution capillary. For use with SB option, HEN, and DIHEN

Fit Kit #1 Micro

Union, ferrules, and microbore Tefzel tubing for use with SB option. The microbore tubing feeds through the SB end fitting until it seals against the solution capillary. Minimizes dead volume.

Fit Kit #3

Union, ferrules, and Tefzel tubing (1/16”) to connect to standard 4mm liquid inlet.

Fit Kit #2

Union and ferrules for secure, high-pressure connection of argon supply line (recommend for ≥ 50 psig (345 kPa), HEN and DIHEN).

Fit Kit #3T NEW

Press-on solution coupling for 4 mm o.d. nebulizer inlet. Included with every standard Meinhard nebulizer. Also fits most 4 mm spray chamber pumped drain fittings.

Meinhard Glass Products700 Corporate Circle, Suite A, Golden CO 80401 USA

Tel: 303.277.9776 FAX: 303.216.2649 E-mail: [email protected] 1-800-MEINHARD

NEBULIZER OPERATION: The MEINHARD® nebulizer will aspirate liquid sample naturally when the rated flow of gas is directed into the sidearm and a sample feed is connected to the liquid input. All models may be operated with externally pumped analyte provided the sample flow is not significantly below the natural aspiration rate. Calibrations reflect a standard operational reference and are not intended as limitations on conditions of use, which can vary widely. Operation can be optimized for specific instruments.

RELATED PRODUCTS:

Meinhard Glass Products offers common sizes and formulations of peristaltic pump tubing, standard and flared end, as well as Meinhard-quality torches and spray chambers for all ICP and ICPMS instruments from leading manufacturers.

Meinhard Glass Products

Meinhard Description

Normal aspiration rate ranges from 0.1 to 5 mL/minType A Flush, lapped nozzle, 1 L/min ArType A, quartz Flush, lapped nozzle, 1 L/min ArType A, high purity Flush, lapped nozzle, 1 L/min Ar, high purity quartzType C Recessed capillary, vitreous nozzle, 1 L/min ArType C, quartz Recessed capillary, vitreous nozzle, 1 L/min ArType K Recessed capillary, lapped nozzle, 0.7 L/min ArType K, quartz Recessed capillary, lapped nozzle, 0.7 L/min ArType CK Recessed capillary, vitreous nozzle, 0.7 L/min ArType CK, quartz Recessed capillary, vitreous nozzle, 0.7 L/min ArHigh flow (add) For natural aspiration greater than 6mL/minAlternate gas (add) Nebulizer calibration for air, nitrogen, helium, etc.SB option (add) Replace standard 4 mm o.d. solution inlet with 3 mm inlet

Normal aspiration rate ranges from 0.005 to 0.3 mL/min

HEN High efficiency nebulizer, Type A, 1 L/min Ar at 90, 120, 150, 170 psi

TL-HEN High efficiency nebulizer, Type A, long barrel, 1 L/min Ar at 90, 120, 150, 170 psi

Q-HEN High efficiency nebulizer, Quartz, Type A, 1 L/min Ar at 90, 120, 150, 170 psi

Q-TL-HEN High efficiency nebulizer, Quartz, Type A, long barrel, 1 L/min Ar at 90, 120, 150, 170 psi

DIHEN Direct injection high efficiency nebulizer, Type A, 1 L/min Ar at 90, 120, 150, 170 psi

LB-DIHEN Direct injection high efficiency nebulizer, Large Bore, Type A, 1 L/min Ar at 90, 120, 150, 170 psi

Q-DIHEN Direct injection high efficiency nebulizer, Quartz, Type A, 1 L/min Ar at 90, 120, 150, 170 psi

Q-LB-DIHEN Direct injection high efficiency nebulizer, Quartz, Large Bore, Type A, 1 L/min Ar at 90, 120, 150, 170 psi

Alternate gas (add) Nebulizer calibration for air, nitrogen, helium, etc.

CIR Helium nebulizer for LC-MS

Custom Nebulizers call 1.800.634.6427 or email [email protected]

DIHEN Adapter To fit DIHEN to demountable torch; specify instrument make and model

Fit Kit #1 Solution inlet adapter for Small-Bore nebulizers, HEN, and DIHEN, includes 1.2 m ETFE tubing

Fit Kit #1 Micro Solution inlet adapter for Small-Bore nebulizers, HEN, and DIHEN, includes 1.2 m microbore PTFE tubing

Fit Kit #2 High pressure gas (carrier) adapter for 0.25" o.d. supply tubing to 4 mm o.d. nebulizer gas inlet

Fit Kit #3 Solution inlet adapter for 4 mm nebulizers, includes 1.2 m ETFE tubing

Fit Kit #3 TPress-on solution inlet adapter for 4 mm nebulizers, 0.6 m ETFE tubing

MEINHARD® Nebulizers

Standard Nebulizers

High Efficiency and Direct Injection

Accessories

30 June 2009

2009 Price List

All 4 mm inlet (standard) nebulizers include one Fit Kit 3T at no charge.

2009 Price List Printed 8/10/2009

700 Corporate Circle, Suite A Golden CO 80401 USA1.800.MEINHARD 303.277.9776 [email protected] www.meinhard.com

Page 1 of 14


Meinhard Part # OEM Part # Description

Agilent

ML190005 G182065028 Quartz Torch, 2.5 mm Injector, 4500ML190008 G182065035 Quartz Torch, Demountable, 4500ML190006 G182065229 Quartz Torch, 1.5 mm Injector, 4500ML190009 G183365422 Quartz Torch, Demountable, w/Placement Pin, 7500ML190010 G183365423 Quartz Torch, 2.5 mm Injector, Placement Pin, 7500 - DISCONTINUED see ML190022ML190011 G183365424 Quartz Torch, 1.5 mm Injector, Placement Pin, 7500ML190012 G183365425 Quartz Torch, 1.0 mm Injector, Oils, Placement Pin, 7500ML190022 G182067002 Quartz Torch, 2.5 mm injector, 7500 Series ICP/MS, 2 Projections, HMI CompatibleME13027500 ES13027500 O-ring free, Precision Quartz Torch, ESIME13024500 ES13024500 O-ring free, Precision Quartz Torch, ESIML190018 G182065026 Quartz Torch Shield, 4500ML190045 G182080235 Pyrex Adapter, Ball to Socket, 56 mm, 4500ML190038 G182080237 Quartz Adapter, Ball to Socket, 56 mm (replaces Pyrex G182080235), 4500ML190043 G183365421 Quartz Torch Shield, 24.5mmL w/glass dot, 7500ML190041 G183365426 Quartz Adapter, Ball to Socket, 82 mm, 7500 ML190044 G183365427 Quartz T-connector, Ball to Socket, 82 mm, with optional gas inlet, 7500ML190042 G183380040 Quartz Torch Shield, 24.5mmL, 7500ML190040 Pyrex Adapter, Ball to Socket, 82 mm, 7500ML190033 Quartz Socket Adapter, to 1/4" EndML190013 G182065337 Quartz Spray Chamber, Double Pass, 12/5 Socket, for Babington and Concentric ML190014 G182065339 Quartz Spray Chamber, Double Pass, 12/5 Socket, extended inner for Cross-flow ML190015 Quartz Cyclonic Spray Chamber, Top Socket, 90 deg bendML190015ES ML190015 with Easy-Seal threaded nebulizer inlet and Teflon PFA cap.TQ-30-A2 G1820-65138 Quartz concentric nebulizer, 2 mL/min, 1 L/min, 30 psiMM151030 Teflon Adapter (end cap), 6mm Nebulizer to 35mm Spray Chamber MC65265 G180265265 Skimmer Cone, NickelMC65050 G182065050 Skimmer Cone, NickelMC65237 G182065237 Skimmer Cone, PlatinumMC65238 G182065238 Sampler Cone, NickelMC65239 G182065239 Sampler Cone, PlatinumMC65497 G183365497 Skimmer Cone, Nickel, 7500

GV, Micromass

ML165008 6366307 Quartz Torch, Demountable for ISISML165005 6368301 Quartz Torch, 1.5mm InjectorML165016 6368303 Pyrex Spray Chamber, Double PassML165015 6368308 Quartz Spray Chamber, Double PassML165020 M695210BD1 Quartz Elbow, Ball/SocketML165025 M695531A Quartz BonnetTQ-30-A2 Quartz concentric nebulizer, 2 mL/min, 1 L/min, 30 psiMM151030 Teflon Adapter (end cap), 6mm Nebulizer to 35mm Spray Chamber MC695011 M695011BD1 Nickel Skimmer ConeMC695080 M695080BD1 Nickel Sampler Cone, Copper BaseMC695439BD1 M695439BD1 Nickel Sampler Cone, PlatformMC695440BD1 M695440BD1 Nickel Skimmer Cone, Platform

JY - Jobin Yvon

MA1589 31021589 Alumina Injector, 2.0mmML116050 31023722 Quartz Torch Tube, Outer Dem 71mmML116052 31023723 Quartz Torch Tube, Inner, DemML116053 31023724 Teflon Centering RingML116070 31031099 Quartz Torch Tube, Outer, Panorama 105mmML135005 49010100 Quartz Torch, Fixed Injector, 1.5mmML116051 Quartz Torch Tube, Outer Dem 82.5mmML116059 Quartz Injector, 2.0mmMM116200 46702525 O-ring, Viton, Pack of 4ML116054 31026996 Spray Chamber Scott Type (also 31031326)ML116055 31030809 Cyclonic Spray Chamber (also 31031279), top socket, 4 mm drain ML116055ES ML116055 with Easy-Seal threaded nebulizer inlet and Teflon PFA capML116056 Cyclonic Spray Chamber, 50 mL, top socket, ground glass tapered (14/20) drain ML116057 47929046 ML116055 with water jacket for coolingML116060 47929049 Cyclonic Spray Chamber, 20 mL, top socket, 4mm drain

Meinhard Torch, Injector, Spray Chamber, and Cone Price List30 June 2009



Page 2 of 14

Meinhard Glass ProductsMeinhard Part # OEM Part # Description

ML116061 Cyclonic Spray Chamber, Axial, 90-deg outlet to 12/5 socket, baffle, o-ring inlet, 4 mm ML116062 31031479 Cyclonic Spray Chamber, Axial, Taper to Top Socket, O-ring Inlet, 4 mm Pump DrainML116063 21356040 Pyrex Sheath Gas TubeTR-50-C1 47929001 Type C nebulizer, glass, 1 mL/min and 1 L/min @ 50 psiTR-30-C2 47929002 Type C nebulizer, glass, 2 mL/min and 1 L/min @ 30 psiTR-30-C3 47929003 Type C nebulizer, glass, 3 mL/min and 1 L/min @ 30 psiTR-50-C0.5 47929004 Type C nebulizer, glass, 0.5 mL/min and 1 L/min @ 30 psiTR-30-K3 47929005 Type K nebulizer, glass, 3 mL/min and 0.7 L/min @ 30 psiTR-50-C3 47929006 Type C nebulizer, glass, 3 mL/min and 1 L/min @ 50 psi

LECO

TR-30-C3 700-612 Type C nebulizer, glass, 3 mL/min and 1 L/min @ 30 psi

Leeman Labs (Teledyne)

ML155023 120-00336-3 Quartz Torch, 2.5 mm injector (does not include tubing and fittings)ML155020 120-00336-1 Quartz Torch, 1.5 mm injector (does not include tubing and fittings; 120-3748)ML155022 120-00336-2 Quartz Torch, 1.0 mm injector (does not include tubing and fittings; 120-3749)ML155043 318-0001 Quartz Torch, Original DemountableML155064 318-00064 Quartz Torch, Axial, AQ (160mm length)ML155065 318-00065 Quartz Torch, Dual View with slot, AQML155069 318-00069 Quartz Torch, Demountable, AX, DREML155070 318-00070 Quartz Torch, Demountable, DV DREMP155066 318-00066 Purge tube, Axial, for Axial and DV ProfileMP155067 318-00067 Purge tube, Radial, for DV ProfileMP155068 318-00068 Purge tube, Radial for ProfileML155025 120-3751 Spray Chamber, Radial, Scott TypeML155053 120-00475-2 Spray Chamber, Radial, Cyclonic, O-rings for 6mm nebulizerML155054 120-00475-1 Spray Chamber, Radial, Cyclonic, Baffle, O-rings for 6mm nebulizerML155055 318-00049 Spray Chamber, Axial, Scott Type (requires adapter cap; also 120-00201-1)ML155058 120-00461-2 Spray Chamber, Axial, Cyclonic, for Hildebrand GridML155059 120-00461-1 Spray Chamber, Axial, Cyclonic, with Baffle, for Hildebrand Grid (also 318-00092)MM155100 Tubing (PVC) and quick disconnects for Leeman torch

MEINHARD

ML151008 Laser ablation gas mixing chamber with 6 mm ports, PyrexML151016 Pyrex Mini-Cyclonic Spray Chamber, 20 mL, Top Socket, 4 mm Drain, O-ring Inlet ML151016J Pyrex Mini-Cyclonic Spray Chamber, 20 mL, Jacketed, Top Socket, 4 mm Drain, O-ring ML151016Q Quartz Mini-Cyclonic Spray Chamber, 20 mL, Top Socket, 4 mm Drain, O-ring Inlet ML151026 Pyrex Cyclonic Spray Chamber, 50 mL, Top Socket, Inner Baffle, 4 mm Drain, O-ringsML151026ES ML151026 with Easy-Seal threaded nebulizer inlet and Teflon PFA capML151026Q Quartz Cyclonic Spray Chamber, 50 mL, Top Socket, Inner Baffle, 4 mm Drain, O-ringsML151027 Pyrex Cyclonic Spray Chamber, 50 mL, Top Socket, No Baffle, 4 mm Drian, O-ringsML151027ES ML151027 with Easy-Seal threaded nebulizer inlet and Teflon PFA capML151027Q Quartz Cyclonic Spray Chamber, 50 mL, Top Socket, No Baffle, 4 mm Drain, O-ringsML151027A Pyrex Cyclonic Spray Chamber, 50 mL, Axial, No Baffle, 4 mm Drian, O-rings

ML151028QES Quartz Cyclonic Spray Chamber, Jacketed (1/4" ports), Easy-Seal Inlet, Baffle, Right Angle (axial) outlet to 12/5 socket

ML151029QES Quartz Cyclonic Spray Chamber, Jacketed (1/4" ports), Easy-Seal Inlet, Right Angle (axial) outlet to 12/5 socket

ML151020 Teflon-coated Viton o-rings for all spray chambers, 4 eaMLCG15002 12/5 Ball/Socket Clamp, Stainless Steel, with lockMM151025 Viton o-rings for 35 mm spray chamber adapter, 4eaMM151030 Teflon Adapter (end cap), 6mm Nebulizer to 35mm Spray Chamber MM80256 Unifit adapter, 6 mm glass concentric nebulizer to 12 mm inlet port.MM80257 Unifit adapter, 6 mm nebulizer to 12 mm inlet port. For MP080963 and similar nebulizers.MP080963 V-Groove Nebulizer, Noordermeer, 6 mm O.D.

NU Instruments

ML145005 Quartz Torch, 1.5mm InjectorML170005 319-308 Quartz Torch, 1.5mm Injector, O-ring Ball JointML170005R Rebuild of ML170005ML170025 319-311 Bonnet

PerkinElmer Instruments



Page 3 of 14


ML135005 0047-2048 Quartz Torch, w/Ball Jt, 1.5 InjectorML135012 0047-2047 Spray Chamber "Scott" Type, BarrelML135025 0047-2033 Quartz BonnetML131001 Quartz Torch Tube, Optima 3000R, 3 slots, 138mmML131003 N058-0528 Quartz Torch Tube Type II, 3 slotML131003W N068-1690 Quartz Torch Tube Type II, Wear Metals, 3 slotsML131004 N0690568 Quartz Torch Tube, Optima 3000R, 1 slot, 138mmML131005 Quartz Torch Tube, Optima 3000, no slot, 125mmML131007 N058-0233 Quartz Torch Tube ML131009 N058-0376 Quartz Torch Tube, SlottedML131011 N0695379 Quartz Torch Tube, Optima XL, 1 slotML131012 Quartz Torch Tube, Optima 3x00 DV, 2 slotsML131014 N0691662 Quartz Torch Tube, Optima 3x00 DV, 1 SlotML131015 Quartz Torch Tube, Optima DV, 3 SlotML131016 N0771500 Quartz Torch Tube, 4000V , 3 slots ML131017 N0770344 Quartz Torch Tube, 2000/4000/5000 DV, Short, OrganicsML131019 N0770343 Quartz Torch Tube, 2000/4000/5000 DV, No SlotML131020 N0770338 Quartz Torch Tube, 2000/4000/5000 DV, 1 slotML131021 N0772005 Quartz Torch Tube, 2000/4000/5000 DV, 3 slotsML131024 N058-2235 Quartz Bonnet for Plasma IIML131025 N0775289 Quartz Bonnet for 2000/4000 SeriesML131031 N0691664 Quartz Bonnet for 3000 DVML131032 N0695456 Quartz Bonnet for 3000 (after 9/21/94)ML131033 N0695295 Quartz Bonnet for 3000R (before 9/21/94)ML131040 N0775225 Quartz Injector, 0.8mm, 2000/4000, ML131041 N0775226 Quartz Injector, 1.2mm, 2000/4000, ML131042 N0775223 Quartz Injector, 1.6mm, 2000/4000, ML131043 N0775014 Quartz Injector, 2.0mm, 2000/4000, ML131044 N0775224 Quartz Injector, 3.0mm, 2000/4000, ML132033 N0681631 Quartz Injector, 1.2mmML132034 047-3292 Quartz Injector, 1.5mmML132035 N8125029 Quartz Injector, 2.0mmML132040 N0695441 Quartz Injector, 2.0mm, 3000ML132041 N0695442 Quartz Injector, 2.0 mm, 3000XLML132044 N0695449 Quartz Injector, 1.6mm, 3000XLML130046 N0695460 Quartz Injector, 1.2 mm, Optima 3000 XL, 4300V, 5300VMA1531 N0771531 Alumina Injector, 1.2 mm, Optima 2000V/4000V/5000V, MA2184 N0582184 Alumina Injector, 2.0 mm, 1000/2000/II/400/Optima 3000R MA2185 N0582185 Alumina Injector, 1.5mm, 1000/2000/II/400/40, Optima 3000R MA2186 N0582186 Alumina Injector, 0.85mm, 1000/2000/II/400/40/ Optima 3000R, MA5177 N0775177 Alumina Injector, 2.0mm, Optima 2000/4000/5000, DV,MA5227 N0775227 Alumina Injector, 0.80mm, 2000/4000/5000 DV, MA5228 N0775228 Alumina Injector, 1.2mm, 2000/4000/5000 DV, MA5362 N0695362 Alumina Injector, 2.0mm, 3000XL, 3x00DV, 4300V, 5300V, MA6093 N0776093 Alumina Injector, 1.2mm, 2000/4000/5000 DV, ML132060 N0681234 Purge TubeML135025 0047-2033 Quartz Bonnet, ICP6500, ICP5500MM5297 N0775297 Copper Foil, Optima 2000/4000/5000 torch, 24 piecesMM690269 N0690269 O-ring Kit for 3x00R, Pk of 5MM690769 N0690769 O-ring Kit for 3000XL, 3000DV, Pk of 9MM770437 N0770437 O-ring Kit for Optima 2000/4000/5000, pack of 6MM902155 9902155 Viton O-rings for Optima 3x00, Pack of 5MP690780 N0690780 Injector Support Adapter, Cyclonic Spray Chamber for Optima 3000 XL/DVML130019 Cyclonic Spray Chamber, Optima 3000 Radial, SCRML130019XL N8122188 Cyclonic Spray Chamber, Optima 3000, XL, DVML130020 N0776053 Cyclonic Spray Chamber 2x00/4x00/5x00DV, Baffle, UnifitML130020ES ML130020 with Easy-Seal threaded nebulizer inlet and Teflon PFA capML130021 N0776052 Cyclonic Spray Chamber 2x00/4x00/5x00DV, No Baffle, UnifitML130021ES ML130021 with Easy-Seal threaded nebulizer inlet and Teflon PFA capML130022 Cyclonic Spray Chamber, 2x00/4x00/5x00DV, Baffle, o-rings ML130023 N0771501 Cyclonic Spray Chamber, 4x00/5x00V, Baffle, Top Socket, Unifit ML130031 N0776090 Cyclonic Spray Chamber 2x00/4x00/5x00DV, 4 mm Baffle (organics), UnifitML130031ES ML130031 with Easy-Seal threaded nebulizer inlet and Teflon PFA capMM80256 218080256 Nebulizer Adapter - unifit for 6 mm o.d. nebulizer to 16 mm Unifit inletTR-30-A3 00472020 Type A nebulizer, glass, 3 mL/min and 1 L/min @ 30 psiTR-50-C1 0047-2022 Type C nebulizer, glass, 1 mL/min and 1 L/min @ 50 psiTR-30-K3 N068-1574 Type K nebulizer, glass, 3 mL/min and 0.7 L/min @ 30 psiTR-30-C3 N810-2011 Type C nebulizer, glass, 3 mL/min and 1 L/min @ 30 psiTR-30-C0.5 N810-2012 Type C nebulizer, glass, 0.5 mL/min and 1 L/min @ 30 psiTQ-30-A3 WE024371 Type A nebulizer, Quartz, 3 mL/min and 1 L/min @ 30 psiSnapper 1.251 N0777460 Nebulizer gas tubing clampMP2731 9992731 Axial purge window, Optima 2x00/3x00XL/3000SCX MP6549 B0066549 Axial purge window, Optima 3000 DVMP1497 N0581497 Radial purge window, Optima 3000R, 3000 SCR, 3000 RL, 4x00V, 5x00VMP0672 N0690672 Radial purge window, Optima 3000 DV - short tubeMP1689 N0691689 Axial purge window, Optima 3000 DV - long tubeMP770322 N0770322 Radial purge window, Optima 4x00DV/5x00DVMP1116 N0771116 Axial purge window, Optima 4x00/5x00



Page 4 of 14


MM21045 O-ring kit for GemTip Nebulizer, pack of 4Tube-PVCSD-30 09908587 Two-stop peristaltic pump tubing in PVC, black/black, pack of 12Tube-PVCSD-30-F Flared two-stop peristaltic pump tubing in PVC, black/black, 12, Tube-PVCSD-45 N0680375 Two-stop peristaltic pump tubing in PVC, red/red, pack of 12Tube-SolFSD-30 00473550 Two-stop peristaltic pump tubing in SolventFlex, black/black, pack of 12Tube-SolFSD-30-F Flared two-stop peristaltic pump tubing in SolventFlex, black/black, 12Tube-SolFSD-45 N0680376 Two-stop peristaltic pump tubing in SolventFlex, red/red, pack of 12

PE Sciex Elan ICP-MS 5000,6000, 9000, DRC, DRC II

ME11021000 ES11021000 O-ring free, Demountable, Precision Quartz Torch, ESIML140009 N8102001 Quartz Torch, One Piece, Long Tube, 36.4ML140010 N8122006 Quartz Torch Tube, Demountable SystemMA2186 N8126039 Alumina Injector, 0.85mmMA2185 N8126040 Alumina Injector, 1.5mm MA2184 N8126041 Alumina Injector, 2.0mm MC021137 WE021137 Skimmer cone, Nickel, includes o-ringsMC021140 WE021140 Sampler cone, Nickel, includes o-ringsML140030 WE023948 Quartz Injector, 2.0mm, w/Ball Joint, w/Support RingTQ-30-A3 WE024371 Type A nebulizer, Quartz, 3 mL/min and 1 L/min @ 30 psiFit Kit 3 WE024372 Solution Inlet Adapter for 4 mm nebulizers, includes 1.2 m ETFE tubing.ML140020 WE025221 Quartz Cyclonic Spray Chamber for Ball Joint InjectorML140020ES Quartz Cyclonic Spray Chamber for Ball Joint Injector, with EasySeal InletML140024ESQ Quartz Cyclonic Spray Chamber for Ball Joint Injector, with EasySeal InletML140024ES Glass Cyclonic Spray Chamber for Ball Joint Injector, with EasySeal InletML140031 WE027030 Quartz Injector, 0.85mm, w/Ball Joint, w/Support RingMC027802 WE027802 Sampler cone, Platinum, MC027803 WE027803 Skimmer cone, PlatinumML140032 WE027005 Quartz injector, 1.5 mm, w/Ball Joint, w/Support RingTube-PVCSD-30 09908587 Two-stop peristaltic pump tubing in PVC, black/black, pack of 12Tube-PVCSD-30-F Flared two-stop peristaltic pump tubing in PVC, black/black, 12, Tube-PVCSD-45 N0680375 Two-stop peristaltic pump tubing in PVC, red/red, pack of 12Tube-SolFSD-30 00473550 Two-stop peristaltic pump tubing in SolventFlex, black/black, pack of 12Tube-SolFSD-30-F Flared two-stop peristaltic pump tubing in SolventFlex, black/black, 12Tube-SolFSD-45 N0680376 Two-stop peristaltic pump tubing in SolventFlex, red/red, pack of 12Tube-PVCSD-125 N8122012 Two-stop peristaltic pump tubing in PVC, White/Black, pack of 12

Plasma Therm ICP

ML135005 Quartz Torch, One Piece, standard, fixed, 1.5 InjML135012 Spray Chamber, "Scott Type" BarrelML135015 Cyclonic Spray ChamberML135025 Bonnet Quartz Torch

Seiko Instruments

ML195005 042220016A3 Quartz Torch, Type A, 1.5mm InjectorML195008 Quartz Torch, Type D, 0.8 mm InjectorML195010 CA16012B3 Quartz Torch, Type C, 2.0mm InjectorML195011 CE11511E3 Quartz Torch, Demountable, w/Joint ConnectML195012 Pyrex Spray Chamber, Double PassML195025 Quartz BonnetTR-50-C1 Type C nebulizer, glass, 1 mL/min and 1 L/min @ 50 psi

Shimadzu

ML160005 20470272 Quartz Torch, Tapered Injector (1.5 mm) Ball JointML160007 21146605 Quartz Torch, Axial, with curved inlet to tapered injector

Spectro Analytical Instruments

ML175005 75060596 Quartz Torch, Spectroflame, fixed inj 1.8mmML175006 75060545 Quartz Torch, Radial, Demountable, 80mm LengthML175007 48205001 Quartz Torch, Spectroflame Fixed 1.0 Inj OilsML175008 Quartz Torch, SpectroFlame Fixed 2.5 InjML175040 48105052 Quartz Torch, EOP, Fixed Flared End 2.5Inj (75160526)ML175041 Quartz Torch, EOP, Fixed Flared End 2.2InjML175042 48105052A Quartz Torch, EOP, Fixed Flared End 1.8Inj (75160592)ML175043 48206002 Quartz Torch, SOP, Demountable, No Flare, 100mm LengthML175044 48206007 Quartz Torch, EOP, Demountable No Flare, 80mm LengthML175045 GE318081458 Quartz Torch, EOP, Demountable, Flare, ML175047 75260533 Quartz Torch, EOP, w/Sheath Gas, 3.2 mm InjectorML175048 75160537 Quartz Torch, EOP w/Sheath Gas, 2.5 mm Injector



Page 5 of 14


ML175049 75160549 Quartz Torch, EOP w/Sheath Gas, 1.8 mm InjectorMM175055 Tubing and gas connectors 44302072, 44302077ML175021 48105008 Quartz Injector, 1.5 mmML175022 48105010 Quartz Injector, 1.8mmML175023 48105009 Quartz Injector, 2.5mmML175010 Spray Chamber, SlurryML175012 48105003 Spray Chamber, Upward Conical Open ML175014 48105006 Spray Chamber, Large Double PassML175018 48106008 Spray Chamber, Lg, Dbl Pass, Jacketed, Threaded PortsML175019 48105051 Spray Chamber, EOP, Lg Dbl PassML175026 48105001 Cyclonic Spray Chamber, Top Socket, Pump DrainML175026ES ML175026 with Easy-Seal threaded nebulizer inlet and Teflon PFA CapML175026EOP 48105061 Cyclonic Spray Chamber, EOP,Pump DrML175026EOP-ES ML175026EOP with Easy-Seal threaded nebulizer inlet and Teflon PFA CapML175026Q Quartz Cyclonic Spray Chamber, SocketML175026QJ USA00850 Quartz Cyclonic Spray Chamber, Jacketed, Threaded PortsML175031 48105011 Adapter, 12/5 socket, 45 mm for ICPTR-30-C1 76060510 Type C nebulizer, glass, 1 mL/min and 1 L/min @ 30 psiMM175100 Liquid inlet fitting and argon tubing with quick disconnect for TR-30-C1

Thermo ARL

ML110005 139009-0003 Quartz Torch, MaxiML112040 173131-0000 Quartz Torch Maxi, Demountable for HFML111030 173463-0000 Quartz Torch, MiniML111031 173473-0000 Quartz Torch, Mini, DemountableML111038 S111403 Quartz Torch MaximML111033 173142-0002 Spray Chamber, Mini, ConicalMP111034 173142-0003 Spray Chamber, Mini, Conical, MDSNML111036 173142-0004 Spray Chamber, Mini, Jacketed, ConicalML110012 173142-0000 Spray Chamber, Maxi, ConicalML111035 173252-0000 Torch Bonnet, MiniML110027 173251-0000 Torch Bonnet, Induction CoilTR-30-A3 914319-000M Type A nebulizer, glass, 3 mL/min and 1 L/min @ 30 psiTR-30-K3 915375-000M Type K nebulizer, glass, 3 mL/min and 0.7 L/min @ 30 psiTR-30-C3 TR-30-C3 Type C nebulizer, glass, 3 mL/min and 1 L/min @ 30 psiMP080963 915817 V-groove high solids nebulizer

Thermo Elemental, Thermo Jarrell-Ash, TJA

ML127508 12512401 Radial Base Torch Kit, High Flow, 1.0 Center TubeML127512 12512405 Radial Base Torch Kit, Slotted, 1.0 Center TubeML125041 12540700 Quartz 1.5 mm Center Tube, for Base TorchML125040 12540701 Quartz 1.0 mm Center Tube, for Base Torch ML127507 12643201 Radial Base Torch Kit, High Flow, 1.5 Center TubeML127507R Rebuild of user-supplied torch 127507/12644001ML127506 12643202 Radial Base Torch Kit, Low Flow, 1.5 Center TubeML127506R Rebuild of user-supplied torch 127506/12644002ML127510 12643203 Trace Axial Base Torch Kit, 1.5 Center TubeML127510R Rebuild of user-supplied torch 127510/12644003ML127513 12643204 Radial Base Torch Kit, Slotted, 1.5 Center TubeML127507N 12644001 Radial Base Torch, High Flow, No Center TubeML127506N 12644002 Radial Base Torch, Low Flow, No Center TubeML127510N 12644003 Trace Axial Base Torch Body, No Center TubeML127511N 12644005 DUO Axial Base Torch, w/Hole, No Center TubeML127512N 12644006 Radial Base Torch Body, Slotted, No Center TubeMA0700C 13643601 Alumina Center Tube, 1.5 mm, for Base Torch MA0702C 13643602 Alumina Center Tube, 2.0 mm, for Base Torch ML125042 13650201 Quartz 2.0 mm Center Tube, for Base TorchML125043 13650202 Quartz 2.4 mm Center Tube, for Base TorchML127511 13856200 DUO Axial Base Torch Kit, w/Hole, 1.5 Center TubeML127511R Rebuild of user-supplied torch 127511/12644005ML127514 13913700 Quartz Torch, fixed inj. 1.5mmML128005 842312051141 Radial Quartz Torch, iCAP 6x00ML128007 842312051241 Duo Quartz Torch, iCAP 6x00ML128040 824312051341 Quartz Center Tube, 1.0 mm, iCAP 6x00ML128041 842312051351 Quartz Center Tube, 1.5 mm, iCAP 6x00ML128042 842312051371 Quartz Center Tube, 2.0 mm, iCAP 6x00ML128050 842312051841 EMT Duo Quartz Torch, iCAP 6x00ML128052 842312051741 EMT Radial Quartz Torch, iCAP 6x00ML128070 842312051941 Quartz Center Tube, 1.0 mm, iCAP 6x00ML128071 842312051951 Quartz Center Tube, 1.5 mm, iCAP 6x00ML128072 842312051971 Quartz Center Tube, 2.0 mm, iCAP 6x00MM125847 12584700 O-ring for Base Torch Injector, pack of 4MM125849 O-ring for Base Torch Teflon Adapter, pack of 4ML125019 13008900 Spray Chamber, Cylindrical, Open Both Ends, Glass Onl



Page 6 of 14


ML127515 13462000 Cyclone Axial Spray Chamber, ICAP 61E TraceML127519 13610500 Cyclone Radial Spray Chamber, Benchtop Iris, Iris Advantage, Gravity DrainML127522 13612000 Cyclone Axial Spray Chamber, TraceScan Iris, Advantage Axial and Iris AP, Gravity ML127523 13612900 Cyclone Spray Chamber, Right Angle InletML127534 13912300 Conical Spray Chamber, Jacketed, O-ring Inlet, Bent DrainML127533 13921900 Conical Spray Chember, O-ring Inlet, Bent Drain ML127517 13966200 Cyclone Axial Chamber, Atomscan, Tracescan IrisML127518 13966300 Cyclone Radial Spray Chamber, Benchtop Iris, Iris Advantage, Pump DrainML127521 14118700 Vertical Cyclone Radial Spray Chamber, Atomscan Advantage Radial ICAPML125012 19040065 Spray Chamber, Cylindrical, Glass OnlyML128010 842312051411 Glass Cyclonic Spray Chamber, iCAP 6x00ML128010ES ML128010 with Easy-Seal threaded nebulizer inlet and Teflon PFA capML128012 842312051311 Glass Cyclonic Spray Chamber, with Baffle, iCAP 6x00ML128012ES ML128012 with Easy-Seal threaded nebulizer inlet and Teflon PFA capML128020 842312051151 Spray Chamber Adapter, Radial, iCAP 6x00ML128021 842312051251 Spray Chamber Adapter, Duo, iCAP 6x00ML127525 8520700 Anti-arc CapML127526 8520701 Anti-arc Cap, w/Flat EdgeMM125100 Nebulizer gas line Luer fitting, male/female pair (TJA 13584100/13584200)TR-30-K2 13918400 Type K nebulizer, glass, 2 mL/min and 0.7 L/min @ 30 psiTR-30-A2 842312051431 Type A nebulizer, glass, 2 mL/min and 1 L/min @ 30 psiTR-50-A2 Type A nebulizer, glass, 2 mL/min and 1 L/min @ 50 psiTR-50-C2 842312051331 Type C nebulizer, glass, 2 mL/min and 1 L/min @ 50 psiMP080963 824312051321 V-Groove Nebulizer, Noordermeer, 6 mm O.D., 30 psiMiraMist 842312051471 MiraMist Parallel-Path Nebulizer in PEEK. 1 L/min @ 45 psi Tube-PVCSD-25 842312051511 PVC 2-stop tubing, 0.025", or/whTube-PVCSD-25-F PVC 2-stop tubing, 0.025", or/wh, flared both endsTube-PVCSD-40 842312051521 PVC 2-stop tubing, 0.040", wh/whTube-PVCSD-35-3 13017700 PVC 3-stop tubing, 0.035", or/orTube-PVCSD-35-3F PVC 3-stop tubing, 0.035", or/or, flared both endsTube-PVCSD-45-3 13107701 PVC 3-stop tubing, 0.045", red/red

Thermo Finnigan ICP-MS

ML185006 Quartz Torch, Element, 1.0 mm InjectorML185007 Quartz Torch, Element, 1.5 mm InjectorML185008 Quartz Torch, Element, 2.0 mm InjectorML185010 1091250 Quartz Torch, Element, Demountable TubeME10021000 ES10021000 O-ring free, Precision Quartz Torch, Element, ESIME1002 ES1002 Quartz Torch, Type CDML185018 Quartz Spray Chamber, Element, Jacketed for Coolant, Threaded Port ConnectionsML185033 Quartz Collar/SleeveMC1044530 1044530 Sampler Cone, NickelMC1067500 1067500 Sampler Cone, PlatinumMC1067600 1067600 Skimmer Cone, NickelMC1047460 1047460 Skimmer Cone, PlatinumMC1142160 1142160 Skimmer Cone (X), NickelMC1142150 1142150 Skimmer Cone (X), PlatinumTQ-30-A1 Type A nebulizer, Quartz, 1 mL/min and 1 L/min @ 30 psiTQ-50-A1 Type A nebulizer, Quartz, 1 mL/min and 1 L/min @ 50 psiTR-30-A1 Type A nebulizer, borosilicate glass, 1 mL/min and 1 L/min @ 30 psiTR-50-A1 Type A nebulizer, borosilicate glass, 1 mL/min and 1 L/min @ 50 psiCIR-50-HK 70005-98010 Helium nebulizer for LC-MS

Thermo VG Instruments

ML145005 3201192 Quartz Torch, ICPMS, w/Ball Jt, 1.5 InjectorML145006 3201732 Quartz Torch, ICPMS, w/Ball Jt, 2.0 InjectorML145007 Quartz Torch, ICPMS, w/Ball Jt, 1.0 InjectorML145008 1200080 Quartz Torch, ICPMS, DemountableML145009 Quartz Torch, ICPMS, Demountable, AxiomML145010 3600970 Quartz Torch, ICPMS X Series, DemountableML145011 3600969 Quartz Torch, ICPMS X Series, w/Ball Joint, 1.5mm InjectorML145012 3600791 Quartz Torch, ICPMS X Series, w/Ball Joint, 2.0mm InjectorML145029 3203789 Quartz Shield, ICPMS (also VG# 3600884)ML145050 3601145 Quartz Torch, ICPMS X Series, w/Ball Joint, 1.5mm InjectorML145053 3601149 Quartz Shield, X-series ICPMS ME12020201 ES12020201 O-ring free, Precision Quartz Torch, PQ-series, ESIME12020301 ES12020301 O-ring free, Precision Quartz Torch, X-series, ESIML145032 3200727 Quartz Coupling, Ball/Socket, 90 deg, for 3200841 Spray ChamberML145016 3200841 Quartz Spray Chamber, Scott type, Jacketed for coolantML145022 3204313 Glass Spray Chamber, Impact, Conical, JacketedML145027 3600093 Quartz Cyclonic Spray Chamber, X-SeriesML145025 3600169 Quartz Coupling, Ball/Socket, 17 degML145024 3600170 Quartz Spray Chamber, Peltier CooledML145023 3600374 Quartz Spray Chamber, Impact, JacketedMC0860 3200860 VG HPI Skimmer Cone, Nickel, does not include gaskets



Page 7 of 14


MC4661 3004661 VG HPI Sampler Cone, Nickel, includes gasketsMC1101 3201101 Skimmer Cone, PlatinumMC0262 3200262 Sampler Cone, PlatinumMM145100 Viton O-rings for VG ICPMS Interface, pack of 3TR-30-A3 1040894 Type A nebulizer, glass, 3 mL/min and 1 L/min @ 30 psiTR-30-A1 1201318 Type A nebulizer, glass, 1 mL/min and 1 L/min @ 30 psiTQ-30-A3 Type A nebulizer, Quartz, 3 mL/min and 1 L/min @ 30 psiTR-30-C3 TR-30-C3 Type C nebulizer, glass, 3 mL/min and 1 L/min @ 30 psi

Varian Analytical Instruments

ML180005B 2010069610 Quartz Torch, ICP-ES, w/Ball JointML180005 2010069690 Quartz Torch, ICP-ESML180005S Quartz Torch, ICP-ES, Socket JointML180025 2010070700 Quartz Bonnet, ICP (also 2010070790)ML180010 2010072900 Quartz Torch, Demountable ICP-ESML180047 2010077500 Quartz Injector, 0.8mm IDML180006 2010078300 Quartz Torch, ICP-MSML180011 2010079390 Quartz Torch, Demountable ICP-MSML180014 2010081200 Quartz Torch, ICP AX, 2.3 mm injectorML180015 2010083400 Quartz Torch, Demountable AXML180017 2010090400 Quartz Torch, ICP AX, w/Right Angle End, 2.3 mm injectorML180016 2010092800 Quartz Torch, ICP AX, w/Right Angle End, 2.3 mm injectorML180030 2010100700 Quartz Torch, ICPMS, w/Ball JointML180026 2010104700 Quartz Torch, ICP AX, w/Right Angle End, 0.8 mm injectorML180027 2010104800 Quartz Torch, ICP AX, w/Right Angle End, 1.5 mm injectorML180028 2010117400 Quartz Torch, ICP Radial, 0.8 mm injectorML180029 2010117500 Quartz Torch, ICP Radial, 1.4 mm injectorMP180048 9910057300 Injector Support Adapter PTFEMA6759 2410067590 Alumina Injector 1.8 mmID x 4mmOD x 129mmML180046 9910057000 Quartz Injector, 1.4mm IDML180018 GE#808-0540 Quartz Torch, ICP AX, w/Right Angle SocketML180012 GE#809-0549 Long Transfer Tube, Chamber to Torch, w/Ball JointsML180005S Quartz Torch, ICP, w/SocketML180013 Pyrex Cyclone Spray Chamber, Baffle, Top Socket, UnifitML180019 7910043700 Pyrex Cyclone Spray Chamber, Baffle, 8 mm Top, UnifitML180019ES ML180019 with Easy-Seal threaded nebulizer inlet and Teflon PFA capML180021 2010081700 Pyrex Cyclonic Spray Chamber, 8 mm Top, O-ring InletML180021ES ML180021 with Easy-Seal threaded nebulizer inlet and Teflon PFA capML180022 Pyrex Cyclonic Spray Chamber, Baffle, 8 mm Top, O-ring InletML180023 9910070400 Spray Chamber, Glass, Jacket/CoolantML180031 0102-932 Quartz Spray Chamber, ICPMS, Double PassML180032 0102-1064 Quartz Universal Joint, ExtensionML180033 0102-933 Quartz Make-up IN-Port 2MG800256 218080256 Nebulizer Adapter - unifit for 6 mm o.d. nebulizer to 16 mm inletTR-30-K3 2010081600 Type K nebulizer, glass, 3 mL/min and 0.7 L/min @ 30 psiTR-30-C2 2010076500 Type C nebulizer, glass, 2 mL/min and 1 L/min @ 30 psiTR-30-K2 2010069500 Type K nebulizer, glass, 2 mL/min and 0.7 L/min @ 30 psiTube-PVCSD-30 3710027200 PVC 2-Stop Tubing 0.030" Black/BlackTube-PVCSD-40 3710034400 PVC 2-Stop Tubing 0.040" White/WhiteTube-PVCSD-51 3710034500 PVC 2-Stop Tubing 0.051" Gray/GrayTube-PVCSD-65 3170034600 PVC 2-Stop Tubing 0.065" Blue/BlueMC10094100 9910094100 Skimmer cone, Nickel, MC10094000 9910094000 Sampler cone, Nickel, ML130035 9910040000 VGA 76/77: Quartz Absorption Cell, pk of 2ML130030 9910040700 VGA 76/77: Quartz Mercury Flow Cell KitML130060 9910054400 VGA 76/77: Quartz Atom Concentrator Tube, ACT 80, pk of 10



Page 8 of 14


Meinhard Part # DescriptionTube-PVCSD-05 PVC 2-Stop Tubing 0.005" Orange/BlackTube-PVCSD-05-F PVC 2-Stop Tubing 0.005" Orange/Black, Flared both endsTube-PVCSD-075 PVC 2-Stop Tubing 0.0075" Orange/RedTube-PVCSD-075-F PVC 2-Stop Tubing 0.0075" Orange/Red, Flared both endsTube-PVCSD-10 PVC 2-Stop Tubing 0.010" Orange/BlueTube-PVCSD-10-F PVC 2-Stop Tubing 0.010" Orange/Blue, Flared both endsTube-PVCSD-15 PVC 2-Stop Tubing 0.015" Orange/GreenTube-PVCSD-15-F PVC 2-Stop Tubing 0.015" Orange/Green, Flared both endsTube-PVCSD-20 PVC 2-Stop Tubing 0.020" Orange/YellowTube-PVCSD-20-F PVC 2-Stop Tubing 0.020" Orange/Yellow, Flared both endsTube-PVCSD-25 PVC 2-Stop Tubing 0.025" Orange/WhiteTube-PVCSD-25-F PVC 2-Stop Tubing 0.025" Orange/White, Flared both endsTube-PVCSD-30 PVC 2-stop tubing 0.030" Black/BlackTube-PVCSD-30-3 PVC 3-stop tubing 0.030" Black/BlackTube-PVCSD-30-F PVC 2-stop tubing 0.030" Black/Black, Flared both endsTube-PVCSD-35 PVC 2-stop tubing 0.035" Orange/OrangeTube-PVCSD-35-3 PVC 3-stop tubing 0.035" Orange/OrangeTube-PVCSD-35-3F PVC 3-stop tubing 0.035" Orange/Orange, Flared both endsTube-PVCSD-35-F PVC 2-stop tubing 0.035" Orange/Orange, Flared both endsTube-PVCSD-40 PVC 2-Stop Tubing 0.040" White/WhiteTube-PVCSD-45 PVC 2-stop tubing 0.045" Red/RedTube-PVCSD-45-3 PVC 3-stop tubing 0.045" Red/RedTube-PVCSD-45-F PVC 2-stop tubing 0.045" Red/Red, Flared both endsTube-PVCSD-51 PVC 2-stop tubing 0.051" Gray/GrayTube-PVCSD-56 PVC 2-Stop Tubing 0.056" Yellow/YellowTube-PVCSD-56-3 PVC 3-Stop Tubing 0.056" Yellow/YellowTube-PVCSD-65 PVC 2-Stop Tubing 0.065" Blue/BlueTube-PVCSD-69 PVC 2-Stop Tubing 0.069" Blue/GreenTube-PVCSD-81 PVC 2-Stop Tubing 0.081" Purple/PurpleTube-PVCSD-90 PVC 2-Stop Tubing 0.090" Purple/BlackTube-PVCSD-125 PVC 2-Stop Tubing 0.125" White/BlackTube-SolFSD-30 SolventFlex 2-Stop Tubing 0.030" Black/BlackTube-SolFSD-30-3 SolventFlex 3-Stop Tubing 0.030" Black/BlackTube-SolFSD-30-F SolventFlex 2-Stop Tubing 0.030" Black/Black, Flared both endsTube-SolFSD-35 Solvent Flex 2-Stop Tubing 0.035" Orange/OrangeTube-SolFSD-35-3 Solvent Flex 3-Stop Tubing 0.035" Orange/OrangeTube-SolFSD-35-F Solvent Flex 2-Stop Tubing 0.035" Orange/Orange, Flared both endsTube-SolFSD-45 SolventFlex 2-Stop Tubing 0.045" Red/RedTube-SolFSD-45-3 SolventFlex 3-Stop Tubing 0.045" Red/RedTube-SolFSD-45-F SolventFlex 2-Stop Tubing 0.045" Red/Red, Flared both endsTube-SolFSD-51 SolventFlex 2-Stop Tubing 0.051" Gray/GrayTube-SolFSD-56 SolventFlex 2-Stop Tubing 0.056" Yellow/YellowTube-SolFSD-81 SolventFlex 2-Stop Tubing 0.081" Purple/PurpleTube-Viton-20 Acidflex/Viton 2-Stop Tubing 0.020" Orange/YellowTube-Viton-30 Acidflex/Viton 2-Stop Tubing 0.030" Black/BlackTube-Viton-30-3 Acidflex/Viton 3-Stop Tubing 0.030" Black/BlackTube-Viton-35 Acidflex/Viton 2-Stop Tubing 0.035" Orange/OrangeTube-Viton-35-3 Acidflex/Viton 3-Stop Tubing 0.035" Orange/OrangeTube-Viton-40 Acidflex/Viton 2-Stop Tubing 0.040" White/WhiteTube-Viton-40-3 Acidflex/Viton 3-Stop Tubing 0.040" White/WhiteTube-Viton-45 Acidflex/Viton 2-Stop Tubing 0.045" Red/RedTube-Viton-45-3 Acidflex/Viton 3-Stop Tubing 0.045" Red/RedTube-Viton-51 Acidflex/Viton 2-stop Tubing 0.051" Gray/GrayTube-Viton-81 Acidfelx/Viton 2-stop Tubing 0.081" Purple/PurpleTube-Viton-81-3 Acidfelx/Viton 3-stop Tubing 0.081" Purple/Purple

Tube-Antipuls16-30 PVC 2-Stop Tubing 0.030" Black/BlackTube-Antipuls16-51 PVC 2-Stop Tubing 0.051" Gray/Gray

MEINHARD PERISTALTIC PUMP TUBING

STANDARD SIZES

30 June 2009

ALL TUBING - PACK OF 12 PIECES



Page 9 of 14


PFA Cyclonic Spray chambersES-31zz-3001 O-ring free PFA cyclonic spray chamber for ICP-OES (no baffle), ESI injector connectionES-31zz-3011 O-ring free PFA baffled cyclonic spray chamber for ICPMS, ESI injector connection

ES-31zz-3101O-ring free PFA cyclonic spray chamber (no baffle) with 1/4-28 threaded port, ESI injector connection

ES-31zz-3111 O-ring free PFA baffled cyclonic spray chamber with 1/4-28 threaded port, ESI injector connectionMust specify instrument manufacturer and model (zz)

Each kit includes: 2 MicroFlow Teflon PFA Nebulizers (specify aspiration rate)1 PureCap Teflon PFA Spray Chamber End Cap1 PureChamber low-flow, double-pass, Teflon PFA spray chamber 1 Sapphire Injector, 1.8 mm i.d., with Teflon PFA base1 Quartz Torch

Part Number OEM Part No. DescriptionES-2160-4500-xx Agilent 4500 ICPMSES-2160-7500-xx Agilent 7500 ICPMSES-2290-0350-xx GV Instruments ICPMSES-2280-0351-xx Horiba Jobin-Yvon radial ICPES-2260-0470-xx Leeman Labs ICPES-2320-8210-xx NU Instruments ICPMSES-2170-0352-xx PerkinElmer/Sciex ELAN 6000, 9000, DRC, DRC II ICPMS (35mm)ES-2170-0472-xx PerkinElmer/Sciex ELAN 6000, 9000, DRC, DRC II ICPMS (47mm)ES-2270-4470-xx PerkinElmer Optima 2000/4000 series ICPES-2270-2470-xx PerkinElmer Optima 3000 series radial ICPES-2270-1470-xx PerkinElmer Optima 3000 series axial ICPES-2250-0470-xx Spectro Ciros ICPES-2185-0471-xx Thermo Finnigan Element, Neptune ICPMS (Type CD torch)ES-2230-1470-xx Thermo Jarrell-Ash Iris axial ICPES-2230-2470-xx Thermo Jarrell-Ash Iris radial ICPES-2190-0350-xx Thermo VG Axiom, PQ3 (water-cooled spray chamber) ICPMSES-2190-1470-xx Thermo VG X-series ICPMSES-2240-3470-xx Varian Liberty ICPES-2240-1470-xx Varian UltraMass ICPMSES-2240-2470-xx Varian Vista ICPES-2240-4470-xx Varian ICPMS

Part Number OEM Part No. Description Each $USES-2040-yy PFA-ST nebulizer with one exchangeable external capillary (specify) 992ES-2020 PFA-20, 20 uL/min 1,155ES-2000 PFA-50, 50 uL/min 1,045ES-2002 PFA-100, 100 uL/min 1,045ES-2005 PFA-400, 400 uL/min 1,045ES-4040-yy PolyPro-ST Polypropylene nebulizer with one exchangeable external capillary 520

MicroFlow and PolyPro Nebulizers

Elemental Scientific Sample Introduction Kits and Accessories30 June 2009

Standard HF-Resistant Sample Introduction Kits



Page 10 of 14


Part Number Descriptionxx=10 PFA-20 (20 uL/min) and PFA-20 (20 uL/min)xx=11 PFA-20 (20 uL/min) and PFA-50 (50 uL/min)xx=12 PFA-20 (20 uL/min) and PFA-100 (100 uL/min)xx=13 PFA-20 (20 uL/min) and PFA-400 (400 uL/min)xx=14 PFA-20 (20 uL/min) and PFA-ST (variable)xx=15 PFA-50 (50 uL/min) and PFA-50 (50 uL/min)xx=16 PFA-50 (50 uL/min) and PFA-100 (100 uL/min)xx=17 PFA-50 (50 uL/min) and PFA-400 (400 uL/min)xx=18 PFA-50 (50 uL/min) and PFA-ST (variable)xx=19 PFA-100 (100 uL/min) and PFA-100 (100 uL/min)xx=20 PFA-100 (100 uL/min) and PFA-400 (400 uL/min)xx=21 PFA-100 (100 uL/min) and PFA-ST (variable) - standard for ICPMS xx=22 PFA-400 (400 uL/min) and PFA-400 (400 uL/min)xx=23 PFA-400 (400 uL/min) and PFA-ST (variable)xx=24 PFA-ST (variable) and PFA-ST (variable)xx=25 1 PFA-20 (20 uL/min) (deduct $995 from kit price)xx=26 1 PFA-50 (50 uL/min) (deduct $995 from kit price)xx=27 1 PFA-100 (100 uL/min) (deduct $995 from kit price)xx=28 1 PFA-400 (400 uL/min) (deduct $995 from kit price)xx=29 1 PFA-ST (variable) (deduct $945 from kit price)xx=40 PolyPro-ST (variable) and PolyPro-ST (variable)xx=41 1 PolyPro-ST (variable) (deduct $495 from kit price)

Part Number Descriptionyy=25 20 uL/minyy=26 50 uL/minyy=27 100 uL/minyy=28 400 uL/minyy=29 700 uL/min

Each $USApex Q ES-43zz-1000-21 Apex Q System with one PFA-100 nebulizer and one PFA-ST nebulizer 12,900Apex HF ES-44zz-1000-21 Apex HF System with one PFA-100 nebulizer and one PFA-ST nebulizer 17,900Apex IR ES-45zz-1000-21 Apex IR System with one PFA-100 nebulizer and one PFA-ST nebulizer 14,900Apex E ES-48zz-1000-24 Apex E System for ICP with two PFA-ST nebulizers 11,400ACM Module ES-4599-2000 Cooled Micro-porous Nafion membrane desolvation unit 3,990Spiro TMD ES-4599-3000 Heated Macro-porous Teflon membrane desolvation unit 4,500

Must specify instrument manufacturer and model (zz)PC3

PC3 - a small, simple, and robust Peltier cooler for cyclonic spray chambersEach $US

ES-41zz-1001 PC3 with quartz cyclonic spray chamber for ICP-OES (no baffle), ESI injector connection 2,455ES-41zz-1011 PC3 with baffled quartz cyclonic spray chamber for ICPMS, ESI injector connection 2,480ES-41zz-1101 PC3 with quartz cyclonic and 1/4-28 threaded port for auxiliary gas, ESI injector connection 2,530

ES-41zz-1111PC3 with baffled quartz cyclonic and 1/4-28 threaded port for auxiliary gas, ESI injector connection 2,555

ES-41zz-3001 PC3 with PFA cyclonic spray chamber for ICP-OES (no baffle), ESI injector connection 2,925ES-41zz-3011 PC3 with baffled PFA cyclonic spray chamber for ICPMS, ESI injector connection 2,950ES-41zz-3101 PC3 with PFA cyclonic spray chamber and 1/4-28 threaded port, ESI injector connection 3,000

ES-41zz-3111 PC3 with baffled PFA cyclonic spray chamber and 1/4-28 threaded port, ESI injector connection 3,025Must specify instrument manufacturer and model (zz)

Apex - fully integrated, high-sensitivity sample inlet systems for ICPMS and ICP-OES. Includes two PFA MicroFlow nebulizers. Specify electrical outlet, instrument manufacturer and model.

Capillary Selection Guide for ST Nebulizers

Nebulizer Combinations for Upgrade Kits

Apex



Page 11 of 14


Part Number OEM Part No. Description

Perimax 12/1 - SM 08-1000 1 channel, 12 rollers, adjustable tension, with basic remote control, 115/230V 50/60Hz 70W

Perimax 12/2 - SM 08-10012 channels, 12 rollers, individually adjustable tension, with basic remote control 115/230V 50/60Hz 70W

Perimax 12/4 - SM 08-10034 channels, 12 rollers, individually adjustable tension, with basic remote control 115/230V 50/60Hz 70W

Perimax 12/6 08-0109 6 channels, 12 rollers, individually adjustable tension, with basic remote control (rmds), 115VPerimax 12/6 08-0104 6 channels, 12 rollers, individually adjustable tension, with basic remote control (rmds), 230V

Perimax 16/1 - SM 08-15001 channel, 16 rollers, individually adjustable tension (or 2 standard channels), with basic remote control 115/230V 50/60Hz 70W

Perimax 16/2 - SM 08-15022 channels, 16 rollers, individually adjustable tension (or 4 standard channels), with basic remote control 115/230V 50/60Hz 70W

Perimax 16/3 08-05093 channels, 16 rollers, individually adjustable tensions (or 6 standard channels), with basic remote control (rmds), 115V

Perimax 16/3 08-05033 channels, 16 rollers, individually adjustable tensions (or 6 standard channels), with basic remote control (rmds), 230V

Part Number OEM Part No. Description

Gilson rem option 08-0148 Allows Spetec pump to be controlled by Gilson interface, off/on/high speedGilson adapter 08-0045 Allows Spetec pump head to be used on Gilson pump chassisPump head, 12/1 08-0005Pump head, 12/2 08-0006Pump head, 12/4 08-0008Pump head, 12/6 08-0009Pump head, 16/1 08-0046Pump head, 16/2 08-0047Pump head, 16/3 08-0048Drive motor 115V 24-0011 115 V, includes gear and optical encoderDrive motor 230V 24-0010 230 V, includes gear and optical encoder

Spetec Peristaltic Pumps and Accessories30 June 2009



Page 12 of 14


Model W(mm) D(mm) H(mm) W(in) D(in) H(in)FBS 21 610 350 700 24.0 13.8 27.6FBS 37 610 610 700 24.0 24.0 27.6FBS 56 915 610 700 36.0 24.0 27.6FBS 75 1220 610 700 48.0 24.0 27.6FBS 93 1525 610 700 60.0 24.0 27.6FBS 112 1830 610 700 72.0 24.0 27.6

OptionsPlastic coatingFrame base, for FBS 21, stainless steel, with castorsFrame base, for FBS 37, stainless steel, with castorsFrame base, for FBS 56, stainless steel, with castorsFrame base, for FBS 75, stainless steel, with castorsFrame base, for FBS 93, stainless steel, with castorsFrame base, for FBS 112, stainless steel, with castors

Cabinet, for FBS 21, 2 drawers, 1 cupboardCabinet, for FBS 37, 2 drawers, 1 cupboardCabinet, for FBS 56, 2 drawers, 1 cupboardCabinet, for FBS 75, 2 drawers, 1 cupboardCabinet, for FBS 93, 2 drawers, 1 cupboardCabinet, for FBS 112, 2 drawers, 1 cupboard

Interior lighting, fluorescent tube, external switchInterior lighting, UV lamp, external switch

Automatic flow controller, with filter charge indicator

Spare Filter, FBS 21Spare Filter, FBS 37Spare Filter, FBS 56Spare Filter, FBS 75Spare Filter, FBS 93Spare Filter, FBS 112

Other ModelsPBS-37FMS-37FBS-V-37EFBS-37EFBS-V-37Call for more information

Spetec Portable Cleanroom Technology30 June 2009



Page 13 of 14


Part Number Description

EV.3.25.RNP Evapoclean with 3 ports, 3 elbows, 6 vessels (17 or 33mL), basic controller 110 or 230 VEV.6.25.RNP Evapoclean with 6 ports, 6 elbows, 12 vessels (17 or 33mL), basic controller, 110 or 230 VEV.12.25.RNP Evapoclean with 12 ports, 12 elbows, 24 vessels (17 or 33mL), basic controller, 110 or 230 V EV.3.125.RNP Evapoclean with 3 ports, 3 elbows, 6 vessels (60, 90, or 180mL), basic controller, 230V EV.6.125.RNP Evapoclean with 6 ports, 6 elbows, 12 vessels (60, 90, or 180mL), basic controller, 230V EV.12.125.RNP Evapoclean with 12 ports, 12 elbows, 24 vessels (60, 90, or 180mL), basic controller, 230V

EV.3.25.RP Evapoclean with 3 ports, 3 elbows, 6 vessels (17 or 33mL), programmable controller, 110 or 230V EV.6.25.RP Evapoclean with 6 ports, 6 elbows, 12 vessels (17 or 33mL), programmable controller, 110 or 230V EV.12.25.RP Evapoclean with 12 ports, 12 elbows, 24 vessels (17 or 33mL), programmable controller, 110 or 230V EV.3.125.RP Evapoclean with 3 ports, 3 elbows, 6 vessels (60, 90, or 180mL), programmable controller, 230VEV.6.125.RP Evapoclean with 6 ports, 6 elbows, 12 vessels (60, 90, or 180mL), programmable controller, 230VEV.12.125.RP Evapoclean with 12 ports, 12 elbows, 24 vessels (60, 90, or 180mL), programmable controller, 230V

EV.COUDE.25 PTFE Elbow for 17, 24, 33, 64 mL vesselsEV.COUDE.125 PTFE Elbow for 60, 90, 180 mL vesselsSTAND-6x25mL Optional stand with 6 positions for 25 mL bottlesSTAND-6x125mL Optional stand with 6 positions for 125 mL bottles

ED.8/180-230V.RNP Easydigest with 8 positions for 180 mL vessels (59 mm o.d.), basic controller, 230VED.24/50-230V.RNP Easydigest with 24 positions for 50 mL PP vessels (66 mm o.d.), basic controller, 230VED.48/50-230V.RNP Easydigest with 48 positions for 60 mL PFA vessels (49 mm o.d.), basic controller, 230V

ED.8/180-230.RP Easydigest with 8 positions for 180 mL vessels (59 mm o.d.), programmable controller, 230VED.24/50-230V.RP Easydigest with 24 positions for 50 mL PP vessels (66 mm o.d.), programmable controller, 230VED.48/50-230V.RP Easydigest with 48 positions for 60 mL PFA vessels (49 mm o.d.), programmable controller, 230V

PL.A4.100.110.RNP Acid inert hot plate, 300 mm x 200 mm x 40 mm, 100 - 110v, 50/60 Hz, basic controllerPL.A4.230.RNP Acid inert hotplate, 300 mm x 200 mm x 40mm, 230v, 50/60 Hz, basic controllerPL.A3.100.110.RNP Acid inert hotplate, 300 mm x 400 mm x 40 mm, 100 - 110v, 50/60 Hz, basic controllerPL.A3.230.RNP Acid inert hot plate, 300 mm x 400 mm x 40 mm, 230v, 50/60 Hz, basic controllerPL.380X540X40.230V.RNP Acid inert hotplate, 540 mm x 380 mm x 40 mm, 230v, 50/60 Hz, basic controller

Ask about other sizes and configurations.

MV.1 Closed system cleaner uses condensation of high purity solvent vapors to clean labware

Analab EVAPOCLEAN

30 June 2009

Analab EASYDIGEST

Analab Mini Vessel Cleaner

Analab Hot Plates



Page 14 of 14

Meinhard Glass Products 700 Corporate Circle, Suite A Golden, Colorado 80401 USA


Teflon® PFA, HF-resistant sample introduction components, “Preferred by the semiconductor industry.”

• Clean Teflon® PFA components for lower background equivalent concentrations (BECs) and detection limits • O-ring free connections ensure lowest BECs, highest chemical resistance, and easy cleaning • Chemically resistant to strong acids, strong alkalis, and organic solvents • Available for all major ICPAES and ICPMS models

MicroFlow PFA Nebulizers • Chemically resistant, all-Teflon® construction • Low, spike-free background • Resistant to clogging, reliably self-aspirated or pumped • Fine aerosol, high transport efficiency • Fully interchangeable with Meinhard® nebulizers • Self-aspirate at 20, 50, 100, or 400 µL/min • Threaded interface for low dead-volume connections • ST version includes 2 exchangeable capillaries; 100 µL/min is standard; .see Selection Guide for uptake

and capillary selection alternatives • ST-full version includes 100, 400, and 700 µL/min capillaries.

O-ring free Injectors and Precision Quartz Torches • Reduces contamination, easy to clean, easy to insert • Precise alignment • Pt injector (2 mm i.d.) for sub-ppt determinations • Sapphire injector (1.8 mm i.d.) for most high-purity and low background applications • Quartz injector (1.5 mm i.d.) offers economical solution for most non-HF applications

PFA PureChamber and PureCap • Low contamination, chemically inert • O-ring free seals – easy to clean, low maintenance • Excellent short-term and long-term stability • High transmission, high sensitivity • Fast washout • Adapts to 6 mm o.d. Meinhard® nebulizer • Available for most ICP and ICPMS systems

PolyPro Nebulizer • Low-cost alternative to PFA • Excellent chemical resistance • Can be used where aggressive chemicals are to be analyzed for an extended period of time • Fully interchangeable with Meinhard® nebulizers • ST version standard for ICP-OES; see Selection Guide for uptake and capillary selection; 400 µL/min is

standard

Complete Teflon® PFA Upgrade Kits for ICPAES and ICPMS include: • 2 PFA MicroFlow nebulizers • 1 PFA o-ring free PureCap end cap • 1 PFA PureChamber spray chamber • 1 HF-resistant injector (Pt or sapphire) • 1 Quartz torch • All necessary gas lines and connectors

Upgrade kits are available for all major ICP and ICPMS instruments. Please supply the model name or number when ordering. Recommendations:

• The PFA-20 is intended for use in Semicon labs with Si wafer samples, or for petrochemicals that are particle-free.

• The PFA-50 is recommended for low-flow semicon applications and organic solvents. • The PFA-100 is recommended for general purpose semicon and research applications. This is the default

nebulizer for ICPMS applications. • The PFA-ST is recommended for ICP and ICPMS when samples have large, undissolved particles. • The PolyPro-ST is recommended for ICPAES, for a higher sample flow rate, and a lower-cost HF-resistant

sample introduction system. This is the default nebulizer for ICP systems.



3100 Series O-ring-free Cyclonic Spray Chambers in HF-Resistant Polypropylene

ES-31zz-debu Create a part number by selecting the instrument model (zz), spray chamber material (d), auxiliary gas port (e), baffle (b), and choose the outlet for the ICP injector (u). Refer to the table for instrument model (zz). The additional price for an auxiliary port and baffle are indicated below.

Spray Chamber Options US List

d = chamber material (normally 1 or 2) d = 1 quartz (High Purity) $525 d = 2 polypropylene (HF resistant) $700 d = 4 glass $300

e =auxilary port (required for Agilent and for organic solvent applications)

e = 0 no aux. port (standard configuration) $0 e = 1 threaded aux. port, 1/4-28 (standard aux. port for oxygen or make up gas) $75 e = 2 aux. port, 2mm x 4 mm $60

b = baffle type

b = 0 non-baffled (recommended for ICP-AES) $0 b = 1 baffled (recommended for ICP-MS) $25

u = outlet connector type

u = 1 ESI injector connection u = 7 TJA base torch connector (3/8" straight-tube outlet) u = 8 12/5 socket connection (many OEM, PE ELAN OEM Quartz Injector) u = 9 PerkinElmer connector (non-glass, non-12/5 socket)

zz = instrument zz = 50 Generic zz = 51 Finnigan Element 1 zz = 52 Finnigan Element 2 zz = 53 Finnigan Neptune zz = 54 PE Elan 5000/6000/9000/DRC zz = 55 PE Optima 3000 Radial zz = 56 PE Optima 3000 XL/DV zz = 57 PE Optima 2000/4000 zz = 58 VG Axiom zz = 59 VG PQ zz = 60 VG X Series zz = 61 Agilent 4500 zz = 62 Agilent 7500 zz = 63 GV Isoprobe zz = 64 GV Platform

zz = 65 Varian Vista/Vista Pro zz = 66 Varian Liberty zz = 79 Varian ICPMS zz = 67 Spectro Ciros zz = 68 TJA ICP Axial zz = 71 TJA ICP Radial zz = 69 Seiko ICPMS zz = 70 Seiko ICPAES zz = 75 Micromass PT2 zz = 76 JY Ultratrace zz = 81 JY Radial zz = 77 Leeman DRE (Axial) zz = 78 Leeman Radial zz = 80 ARL 3500 series zz = 82 NU Instrument

Elemental Scientific’s PolyPro Cyclonic Spray Chambers accept any 6mm nebulizer and may be used with ESI’s PC3 Peltier chiller.

Note: All 3100 series Cyclonic Spray Chambers will fit the ESI PC3 Peltier Cooler. 3100 Series Cyclonic Spray Chambers may also be used stand-alone.

Meinhard Glass Products700 Corporate Circle, Suite A Golden, Colorado 80401 USA


PC3 – Spray Chamber Temperature ControlCompact, Peltier-cooled Cyclonic Spray Chamber for ICP-OES and ICP-MS

PC3 AdvantagesThermal stabilization of spray chamber improves long-term stability

• Reduces effect of laboratory temperature variation on signal stability

• Reduces solvent loading of plasma

Fast rinse-out using o-ring-free cyclonic spray chamber in quartz or Teflon® PFA

Reduced oxides in ICP-MS

Optional oxygen addition port for organic solvents

PC3 FeaturesUser-selectable control of spray chamber temperature: +2 C or -5 C (-20 C optional)

Quartz cyclonic spray chamber or Teflon PFA spray chamber for HF resistance

Direct connection to torch injector

Completely o-ring free to facilitate analysis of organic solvent solutions

Accepts 6 mm o.d. concentric nebulizers• Meinhard TR- and TQ-series

• Elemental Scientific PFA-series

PC3-SSI model for isotope ratio determination or other high precision analyses

Optional mounting tray for x-y-z torch adjustment

Water-cooled or air-cooled models available



PC3 Peltier Cooler for Cyclonic Spray Chambers

The PC3 is a small, simple, and robust cooler for ICP-MS and ICP-0ES cyclonic spray chambers. The PC3 cools the outer walls of the cyclonic spray chamber to a constant temperature enhancing long-term signal stability, reducing polyatomic ion interferences such as oxides and reducing solvent loading especially when volatile organic solvents are analyzed. The cyclonic spray chamber offers the advantages of low memory effects, fast rinse-out and, in many cases, higher sample transport efficiency.

Create a part number by selecting the instrument model (zz), electrical outlet configuration (a), injector type (i), torch type (t), choose the mounting bracket (g), spray chamber material (d), auxiliary gas port (e), baffle (b), choose the outlet for the ICP injector (u), and choose the nebulizer configuration (xx).

Standard temperature settings are +2C/-5C. Any temperature settings can be accommodated. For custom settings, indicate the upper and lower settings after the part number using the following notation: [@T1@T2]

Unless otherwise specified, PC3 Inlet System Kits will include one PFA-100 nebulizer and one PFA-ST nebulizer (xx = 21).

PC3 Inlet System Kit ES-41zz-debu-aitg-xx

PC3 Peltier Cooler (only) ES-4100

Spray Chamber Options (debu)d = chamber material (normally 1 or 3)d = 1 quartz (High Purity) d = 2 polypropylene d = 3 PFA (HF resistant)d = 4 glass e = auxilary port (mixed gas & organic solvents)e = 0 no aux. port (standard) e = 1 threaded aux. port, 1/4-28 (oxygen or make up gas) e = 2 aux. port, 2mm x 4 mm b = baffle typeb = 0 non-baffled (ICP-OES) b = 1 baffled (ICP-MS) u = outlet connector typeu = 1 ESI injector connection (straight connection)u = 7 TJA base torch connector (3/8" straight-tube outlet)u = 8 12/5 socket connection u = 9 Perkin Elmer injector connection

(e.g., connector for Ryton Spray Chamber)

PC3 Kit Options (aitg)a = electrical outlet configurationa = 1 North America and Japana = 2 Europea = 3 UKa = 4 Chinaa = 5 Indiaa = 6 Australiai = injector typei = 0 No injector i = 1 ESI 1.5mm Quartz i = 3 ESI 1mm Quartz i = 2 ESI 2mm Quartz i = 4 ESI 1.8mm Sapphire i = 7 ESI 2mm Platinum i = 9 OEM Injector t = torch typet = 0 no torch t = 1 OEM Torch t = 2 ESI o-ring-free specifiedt = 3 ESI (o-ring specified) t = 4 One-piece quartz g = mounting bracket/ temperature settingsg = 0 standard without bracketg = 1 standard with bracket

O-ring-free Teflon® PFA Cyclonic Spray Chamber

Apex High-Sensitivity System Elemental Scientific has designed the new Apex family of high sensitivity and low backgroundsample introduction systems to increase signal intensity while often reducing relativebackground contamination for ICPMS and ICPAES analyses. The Apex improves sensitivityprimarily by increasing both sample transport efficiency and the quality of aerosol introduced tothe ICP instrument. The Apex controls background contamination by employing high-purity,inert, and o-ring-free wetted surfaces. When combined with a self-aspirating MicroFlow PFAnebulizer even aggressive and concentrated chemicals may be analyzed at very high sensitivityand very low contamination.

Apex Q High-Sensitivity System

The Apex may be used with nebulizers operating over a wide range of sample flow rates from 20µL/min to over 1 mL/min. The nebulizers may be either self-aspirated or pumped.

Operation

Liquid samples are nebulized into a patent-pending spray chamber and desolvation system wherethe sample aerosol is efficiently conditioned to produce an intense and uniform aerosol that istransported to the ICP.

When compared to conventional ICPMS sample introduction systems the Apex will typicallyincrease ICPMS sensitivity by approximately 10x when using a 300 µL/min nebulizer and byapproximately 3x when using a 100 µL/min nebulizer. These improvement factors are in spite ofthe lower Apex sample consumption rate. ICP-MS detection limits are in the sub-ppt to sub-ppqrange for most elements.

ICPAES detection limits can be improved by up to a factor of 6-10 when operating at 1 ml/minusing a MicroFlow PFA or PolyPro ST nebulizer together with the Apex. Alternatively, thecombination of a low flow nebulizer with the Apex maintains ICP-AES sensitivity while reducingsample consumption by a factor of 5 to 10, improving ICP-AES determinations when the volumeof sample is limited.

Models

The Apex sample introduction system is available in four basic models: Apex E, Apex Q, ApexHF, and Apex IR.

The Apex E has been primarily designed as an inlet system for ICP-AES. the Apex E is very simpleto use with only 1 switch operation and has a Pyrex flow path to produce a relatively low cost,high sensitivity inlet system. The Apex E is supplied with either PolyPro-ST of PFA-ST nebulizers.

The Apex Q has an o-ring-free quartz flow path for high sensitivity and low background forsamples that do not contain hydrofluoric acid. The Apex Q gives the fastest rinse-out of any highsensitivity ICP introduction system. Two MicroFlow PFA nebulizers are included with the Apex Q.

The Apex HF uses a high-purity PFA Teflon flow path to provide resistance to hydrofluoric acid.The Apex HF is recommended for many geochemistry and semiconductor applications wheresamples containing HF are analyzed. Two MicroFlow PFA nebulizers are included with the ApexHF.

The Apex IR has a quartz flow path and includes the ApexAreo membrane desolvation modulefor reducing ICPMS spectral interferences that arise from solvent-derived polyatomic ions. ThreeMicroFlow PFA nebulizers: 50, 100, and 300 µL/min are included with the Apex IR.

Performance Data

The patent pending design of the sample flow path ensures minimal memory effects with rinse-outs comparable if not faster than simple cyclonic systems, even with initial higher count rates.

Enhanced stability, which can be further improved with the use of the Apex IR or the addition ofthe ACM to the other Apex platforms.

Improvements in sensitivity that can range from 3x to 15x depending on the sample flow rateused. The Apex is over 90% efficient at transporting the sample analyte to the plasma.

Capable of running with high matrix samples such as 10% Urine, giving 3.2% rsd after 10 x 5 minsample replicates.

Membrane Desolvation

An optional ACM Nafion fluoropolymer membrane desolvation module is available to removeresidual solvent vapor in the sample aerosol stream. The ACM membrane module may be usedwith any of the ICP-MS Apex models. The membrane module is easily demounted for the Apexexit port. This feature allows the Apex to be used either with or without a membrane to best suitspecific analytical applications.

ACM Membrane is easily attached or detached

With the ACM membrane desolvation module oxides and other ICP-MS interferences are furtherreduced. For example, CeO+/Ce+ was reduced to < 0.1% when using the Apex with membranedesolvation.

The Apex is useful for many types of trace element determinations in diverse fields such asclinical, semiconductor, environmental, petrochemical, and many different research areas.

Available from:

Meinhard Glass Products 700 Corporate Circle, Suite A Golden, CO 80401-5636

Tel. 303.277.9776 Fax 303.216.2649 Email: [email protected]



EElleemmeennttaall SScciieennttiiffiicc IInncc..

NNeeww AAuuttoossaammpplleerrss

CClleeaann aanndd ffaasstt!!

Clean, fast, flexible and small are some of the best terms to describe the new series of autosamplers from Elemental Scientific. Excellent value is another. Developed as part of ESI’s cleanroom concept, these new autosamplers feature all-fluoropolymer construction in the sample flow path for superior acid and solvent resistance. Sealed electrical components ensure a long life. All mechanical and metal parts have been isolated below the sample rack table to prevent sample contamination from wearing parts. ESI’s unique integrated autosampler probe design does away with tubing connections that leak or come apart, while providing a rigid probe that does not require a guide, eliminating another common source of cross-contamination. The sampling arm moves between sample racks, not over them, using linear/polar control to obtain simultaneous changes in X-Y coordinates. Both the SC2 series and the SC14 series feature dual flow-through rinse stations – for two separate and constantly replenished rinse solutions. ESI’s autosamplers are clean and fast.

The SC2 series is a full-featured version with a small footprint that can suit virtually any laboratory. Standard rack sizes range from 96-well microtiter plates to 21-positions racks for 50 mL containers. The normal configuration has 10 standard positions, 2 rinse positions, and 4 rack positions. The software allows for the mixing of rack sizes and custom layouts. An optional HEPA filter cabinet will prevent contamination from external sources.



The SC14 series offers the highest sample capacity for unattended overnight runs, with the smallest per-sample footprint. Using conventional off-the-shelf racks, the SC14 can handle more than 1,200 samples. When equipped with microtiter plates, more than 2,900 samples can be handled. Major options include a traveling rinse station to reduce sample-to-sample time, a flow-injection rapid analysis unit to further reduce sample-to-sample time, and a HEPA filter cabinet to exclude external contaminants.

Competitively priced from $7,700 for the SC2 and $9,900 for the SC14, with industry-leading performance and flexibility, these new autosamplers from ESI offer exceptional value.

Custom solutions are available:

Meinhard Glass Products 700 Corporate Circle, Suite A Golden, CO 80401 USA

303.277.9776 [email protected] www.meinhard.com

Perimax 12

General Information

1. Drive Unit Identical drive units are employed in the Perimax 12 and Perimax 16 pumps, which differ only in the pump head. A stepper motor ensures that liquid transport is highly reproducible and constant.

2. Remote control Speed and direction can be externally controlled (analog: 0-5 Vdc or digital: 26-2100 Hz) through a rear-mounted DB-9 plug.

3. Applications The Perimax peristaltic pump is used in all branches of analytical chemistry, especially where it is essential to supply a system with accurately defined liquid quantities.

• Analytical Instrumentation • Biotechnology, Bioanalytical Chemistry • Liquid Chromatography • Column Chromatography • ICP and AA Instrumentation • Liquid Transfer, Dosing, and Mixing • Laboratory and Production

4. Tubing Peristaltic pump tubing is manufactured from highly flexible plastic materials having a very precise internal diameter. Tubing is available in 19 different sizes from 0.19 mm to 3.18 mm inside diameter to provide a flow rate of 0.004 to 40 mL/min.

5. Technical Data • Pump head with 12 rollers (Perimax 12) provides 1

to 6 channels of liquid flow that is adjustable from 0.004 ml/min to 40 ml/min; or

• Pump head with 16 rollers phase-displaced (Perimax 16) for 1 to 3 channels of pulse-free liquid flow that is adjustable from 0.004 ml/min to 40 ml/min.

• Individually adjustable channels accommodate a wide variety of tubing materials and sizes.

• Speed range: 1 to 80 rpm, controlled by a ten-turn potentiometer with digital readout.

• High-speed key: temporarily overrides the set speed for fast-flush of the pump tubing

• Switch for off, or clockwise/anti-clockwise rotation • Power required: 115/230 Vac at 50/60 Hz, 70 W • Dimensions: 160x160x200 mm • Weight: 4 to 5 kg, depending on the number of

channels 6. Operation The Perimax 12 peristaltic pump is very simple to operate. The pump tubing is placed around the pump head and secured at each end in a tubing retainer. Pressure against the tubing in each channel is adjusted with a fine screw on the pressure bracket. Function keys are provided for ON/OFF and RIGHT/LEFT rotation. The rotational speed of the pump head is continuously adjustable via a 10-turn potentiometer. The digital indicator (0-999) ensures a reproducible speed setting and, therefore, a precise flow rate. A high-speed key provides for brief operation at maximum speed, for example, to obtain fast wash-out of the tubing when changing to another liquid.

Perimax 16 Antipuls Pump Head The 16-roller pump head consists of two half-channels of 8 rollers each in which the rollers are arranged with a 180-degree phase displacement. A piece of pump tubing is inserted into each half-channel; downstream from the pump head, a Y-fitting combines the half-channels. Consequently, a peak in one half-channel is cancelled by a trough in the parallel half-channel so that the combined flow produced is completely pulsation-free. The Perimax 16/2 can be operated with 2 pulse-free channels, 4 pulsating channels, or one pulse-free and 2 pulsating channels. Also available are the Perimax 16/1 and Perimax 16/3.

Sets of pre-assembled pump tubing are available in a variety of sizes for the Perimax 16 Antipuls. A Y-fitting splits the flow between two half-channels; a second Y-fitting recombines the flows downstream.

Peristaltic Pump Flow Rates – for Perimax 12 – SM Series

Meinhard Glass Products 700 Corporate Circle, Suite A Golden, CO 80401 USA

303.277.9776 [email protected] www.meinhard.com

Orange Black

Orange Red

Orange Blue

Orange Green

Orange Yellow

Orange White

Black Black

Orange Orange

White White

Red Red

i.d.Digit RPM mm 0.127 0.191 0.254 0.381 0.508 0.635 0.762 0.889 1.016 1.143

in 0.005 0.0075 0.01 0.015 0.02 0.025 0.03 0.035 0.04 0.045

000 1 0.0007 0.0021 0.0035 0.0091 0.0135 0.0210 0.0307 0.0439 0.0550 0.0630111 10 0.012 0.035 0.067 0.160 0.266 0.370 0.535 0.709 1.033 1.113222 19 0.023 0.068 0.130 0.312 0.518 0.719 1.040 1.374 2.012 2.164333 27 0.034 0.101 0.193 0.463 0.771 1.069 1.544 2.039 2.990 3.214444 36 0.045 0.134 0.256 0.615 1.023 1.418 2.049 2.704 3.968 4.264555 45 0.056 0.167 0.319 0.766 1.276 1.767 2.553 3.369 4.946 5.314666 54 0.067 0.199 0.382 0.917 1.528 2.116 3.058 4.034 5.925 6.365777 62 0.078 0.232 0.445 1.069 1.781 2.465 3.562 4.698 6.903 7.415888 71 0.089 0.265 0.508 1.220 2.033 2.814 4.067 5.363 7.881 8.465999 80 0.100 0.298 0.571 1.371 2.286 3.164 4.571 6.028 8.859 9.515

Red Gray

Gray Gray

Yellow Yellow

Yellow Blue

Blue Blue

Green Green

Purple Purple

Purple Black

Purple Orange

Purple White

Black White

Digit RPM 1.219 1.295 1.422 1.524 1.651 1.854 2.057 2.286 2.540 2.794 3.1750.048 0.051 0.056 0.060 0.065 0.073 0.081 0.090 0.100 0.110 0.125

000 1 0.144 0.153 0.179 0.188 0.248 0.298 0.350 0.393 0.465 0.517 0.623111 10 0.655 0.697 0.824 0.874 0.994 1.314 1.543 1.802 2.072 2.364 2.776222 19 1.166 1.241 1.469 1.560 1.741 2.330 2.737 3.211 3.678 4.212 4.929333 27 1.678 1.784 2.115 2.246 2.488 3.346 3.930 4.621 5.285 6.059 7.082444 36 2.189 2.328 2.760 2.932 3.234 4.361 5.123 6.030 6.892 7.906 9.235555 45 2.700 2.872 3.405 3.619 3.981 5.377 6.317 7.439 8.498 9.754 11.388666 54 3.212 3.416 4.051 4.305 4.728 6.393 7.510 8.848 10.105 11.601 13.541777 62 3.723 3.959 4.696 4.991 5.474 7.409 8.703 10.258 11.712 13.449 15.694888 71 4.235 4.503 5.341 5.677 6.221 8.425 9.897 11.667 13.318 15.296 17.847999 80 10.848 11.536 13.684 14.546 15.926 21.579 25.349 29.888 34.114 39.186 45.714

The first non-pulsing

Peristaltic Pump Perimax 16 - Antipuls

Pump head This pump head has two groups of eight rollers, with the groups offset from each other. The incoming flow is split between two pieces of peristaltic pump tubing, one running over each of the roller groups, then recombined downstream from the head. The wave peak in one tube coincides with the wave trough in the other tube so that peaks and troughs cancel each other. The resulting flow is therefore completely free from pulsations. The roller head has 16 rollers and provides four half channels of 8 rollers each, with two phase-displaced tubes being combined. The 16/4 pump can then be operated either with 2 pulse-free channels or with 4 slightly pulsing channels.

• Pump head with 2 channels

• Output continuously variable from 0.12 mL/min to 36 mL/min

• Reproducible, constant output through optoelectronic speed control

• Universal tubing holders for wide range of pump tubing types and sizes

• Speed range 1 - 80 rpm, controlled by digital readout potentiometer

• Fast-speed key

• Switch for clockwise / counterclockwise rotation

• Remote control ON / OFF, fast speed (option)

• Interface between sample changer and pump for continuously variable wash time (Fast speed)

Meinhard Peristaltic Pump Tubing

ALL TUBING - PACK OF 12 PIECES

STOCK SIZES

Meinhard Part # Description

Tube-PVCSD-05 PVC 2-Stop Tubing 0.005" Orange/Black

Tube-PVCSD-075 PVC 2-Stop Tubing 0.0075" Orange/Red

Tube-PVCSD-10 PVC 2-Stop Tubing 0.010" Orange/Blue

Tube-PVCSD-10-F PVC 2-Stop Tubing 0.010" Orange/Blue, Flared both ends

Tube-PVCSD-15 PVC 2-Stop Tubing 0.015" Orange/Green

Tube-PVCSD-15-F PVC 2-Stop Tubing 0.015" Orange/Green, Flared both ends

Tube-PVCSD-20 PVC 2-Stop Tubing 0.020" Orange/Yellow

Tube-PVCSD-20-F PVC 2-Stop Tubing 0.020" Orange/Yellow, Flared both ends

Tube-PVCSD-25 PVC 2-Stop Tubing 0.025" Orange/White

Tube-PVCSD-30 PVC 2-stop tubing 0.030" Black/Black

Tube-PVCSD-30-3 PVC 3-stop tubing 0.030" Black/Black

Tube-PVCSD-30-F PVC 2-stop tubing 0.030" Black/Black, Flared both ends

Tube-PVCSD-35 PVC 2-stop tubing 0.035" Orange/Orange

Tube-PVCSD-35-3 PVC 3-stop tubing 0.035" Orange/Orange

Tube-PVCSD-35-F PVC 2-stop tubing 0.035" Orange/Orange, Flared both ends

Tube-PVCSD-40 PVC 2-Stop Tubing 0.040" White/White

Tube-PVCSD-45 PVC 2-stop tubing 0.045" Red/Red

Tube-PVCSD-45-3 PVC 3-stop tubing 0.045" Red/Red

Tube-PVCSD-45-F PVC 2-stop tubing 0.045" Red/Red, Flared both ends

Tube-PVCSD-51 PVC 2-stop tubing 0.051" Gray/Gray

Tube-PVCSD-56 PVC 2-Stop Tubing 0.056" Yellow/Yellow

Tube-PVCSD-65 PVC 2-Stop Tubing 0.065" Blue/Blue

Tube-PVCSD-69 PVC 2-Stop Tubing 0.069" Blue/Green

Tube-PVCSD-81 PVC 2-Stop Tubing 0.081" Purple/Purple

Tube-PVCSD-90 PVC 2-Stop Tubing 0.090" Purple/Black

Tube-PVCSD-125 PVC 2-Stop Tubing 0.125" White/Black

Tube-SolFSD-30 SolventFlex 2-Stop Tubing 0.030" Black/Black

Tube-SolFSD-30-3 SolventFlex 3-Stop Tubing 0.030" Black/Black

Tube-SolFSD-30-F SolventFlex 2-Stop Tubing 0.030" Black/Black, Flared both ends

Tube-SolFSD-35 Solvent Flex 2-Stop Tubing 0.035" Orange/Orange

Tube-SolFSD-35-3 Solvent Flex 3-Stop Tubing 0.035" Orange/Orange

Tube-SolFSD-35-F Solvent Flex 2-Stop Tubing 0.035" Orange/Orange, Flared both ends

Tube-SolFSD-45 SolventFlex 2-Stop Tubing 0.045" Red/Red

Tube-SolFSD-45-3 SolventFlex 3-Stop Tubing 0.045" Red/Red

Tube-SolFSD-45-F SolventFlex 2-Stop Tubing 0.045" Red/Red, Flared both ends

Tube-SolFSD-51 SolventFlex 2-Stop Tubing 0.051" Gray/Gray

Tube-SolFSD-56 SolventFlex 2-Stop Tubing 0.056" Yellow/Yellow

Tube-SolFSD-81 SolventFlex 2-Stop Tubing 0.081" Purple/Purple

Tube-Viton-20 Acidflex/Viton 2-Stop Tubing 0.020" Orange/Yellow

Tube-Viton-30 Acidflex/Viton 2-Stop Tubing 0.030" Black/Black

Tube-Viton-30-3 Acidflex/Viton 3-Stop Tubing 0.030" Black/Black

Tube-Viton-35 Acidflex/Viton 2-Stop Tubing 0.035" Orange/Orange

Tube-Viton-35-3 Acidflex/Viton 3-Stop Tubing 0.035" Orange/Orange

Tube-Viton-40 Acidflex/Viton 2-Stop Tubing 0.040" White/White

Tube-Viton-40-3 Acidflex/Viton 3-Stop Tubing 0.040" White/White

Tube-Viton-45 Acidflex/Viton 2-Stop Tubing 0.045" Red/Red

Tube-Viton-45-3 Acidflex/Viton 3-Stop Tubing 0.045" Red/Red

Tube-Viton-51 Acidflex/Viton 2-stop Tubing 0.051" Gray/Gray

Tube-Viton-81 Acidfelx/Viton 2-stop Tubing 0.081" Purple/Purple

Tube-Viton-81-3 Acidfelx/Viton 3-stop Tubing 0.081" Purple/Purple

Tube-Antipuls16-30 PVC 2-Stop Tubing 0.030" Black/Black

Tube-Antipuls16-51 PVC 2-Stop Tubing 0.051" Gray/Gray

Laminar FLOW BOX Basic Portable Cleanroom Technology Growing product quality and reliability requirements are making it increasingly necessary to manufacture or process products in particle-free conditions these days. Cleanroom technology has come to play an important role in practically all high-tech sectors, including chemical production, biotechnology, genetic engineering, microelectronics, the optical industry, precision engineering and the food, filling and packaging industries. For this reason, cleanrooms have become standard in many branches of production, but entail high costs in terms of installation and operation. In developing the Laminar FLOW BOX Basic, Spetec® made it its goal to produce a simple and inexpensive solution for virtually particle-free workspaces. The result of our efforts, the Laminar FLOW BOX Basic, is a portable cleanroom that can be manufactured according to individual size requirements. No matter whether you wish to protect analysis samples from contamination or need dust-free conditions for other applications, the Spetec® Laminar FLOW BOX Basic represents a cleanroom workstation that can be adapted to your specific wishes and requirements. The Spetec® Laminar FLOW BOX Basic features a filter equipped with an HF-type laminar air flow director offering 99.995% dust collection efficiency. In other words, the filter screens out at least 99.995% of all particles measuring 0.5 µm in size, or larger, and at least 99.95% of all particles measuring 0.21 µm. The flow velocity of the Spetec® Laminar FLOW BOX Basic is 0.45 m/sec. as tested and certificated by the Fraunhofer Institute for Production Engineering and Automation in Stuttgart, complete with all other technical details. Model designation: Spetec® Laminar FLOW BOX Basic Test parameters: Operation of the Laminar FLOW BOX Basic in a test environment featuring a particulate aerosol in a class 10,000 cleanroom (pursuant to the US Federal Standard 209E) Type of testing: Random particle measurement at representative places Test findings/classification: The Spetec® Laminar FLOW BOX Basic has an isolation factor of < 103

Applied standards/regulations: US Federal Standard 209E Test parameters of the cleanroom environment: Class 10,000 cleanroom (pursuant to the US Federal Standard 209E) The measuring devices used in the testing are regularly calibrated and comply with national and international standards. In cases in which national standards do not exist for the testing procedure, it is performed according to current technical regulations and standards. The documentation drawn up in connection with the testing procedure can be provided upon request. Test application: Operation of the Laminar FLOW BOX Basic in a cleanroom of the 100,000 airborne particulate cleanliness class (pursuant to the US Federal Standard 209E). Maximum ambient concentration of particles ≥ 0.5 µm/ft3 : 100,000. Maximum concentration of particles ≥ 0.5 µm/ft3 in the Laminar FLOW BOX Basic: 100.

Laminar FLOW BOX Basic Portable Cleanroom Technology

Model FBS-V-37 Laminar flow module with vinyl curtain

Model EFBS-V-37 Laminar flow module with vinyl curtain

and exhaust

Model FBS-37 With optional frame base/cabinet

Aerosol-to-LiquidParticle eXtractionSystem (ALPXS)*

A new device developed at Savannah River National Laboratory collects and concentratesairborne metals into a liquid sample for onsite/real time or laboratory analysis. Useful as a tool for coupling ICPMS/OES to airborne particle analysis, the ALPXS can offer near real time sampling and analysis of welding fumes, workplace exposure measurement, or environmental metal particle monitoring. The device is portable and consumes only 12 watts of power.

Uses wet electrostatic precipitation to separate particles from air.Collection efficiency is greater than 90% for particles less than 0.3 micrometers in diameter.Particles in air are drawn through the ionization chamber at a flow rate of between 200 and 300 LPM.Ionization chamber charges particles at 8000 volts.Particles are collected in a liquid reservoir with a volume of 10 - 200 mL.Liquid continuously washes collection electrode to gather particles during the measurement.

Comparison with OSHA PEM for Lead (Pb) ExposureDevice Sampling Total Air Pb

Time, hr Volume, m3 ug/m3

ALPXS 0.8 14.4 4.8 OSHA PEM 2.5 0.3 2.7

* Analysis for Pb by ICPOES

Collection Efficiency versus sampling air flow rate.

Now, for the first time, you can potentially measure metal concentrations approaching picogram per cubic meter levels, or lower.

*U.S. Patent 6955075, Washington Savannah River Company LLC

Technical SpecificationsFootprint: 8” x 8” with chimney height 23” (approx). Power requirements: 12vdc @ 1.25A, battery or converter.Air intake flow rate: 200-300 LPMIonization voltage: 0-10kV, adjustable.Liquid reservoir volume: 20-100 mLs.Duty cycle: Continuous.

Meinhard Glass Products A Division of Analytical Reference Materials International Corporation700 Corporate Circle, Suite A, Golden, CO 80401

Tel: (303) 277-9776) Fax: (303) 216-2649 Email: [email protected] Web: www.meinhard.com

Principle of OperationAir is drawn into the ionization chamber.Particles assume a negative charge.Collection electrode is maintained at positive high voltage and particles are attracted to it.As the particles migrate towards the collection electrode they are trapped by the liquid layer that continuously washes the surface of the collection electrode and accumulate.An auxiliary pump transports a very small fraction of the reservoir volume to an ICPMS, ICP-OES or AA for determination of metal species in the liquid.

Aerosol-to-Liquid Particle eXtraction System - ALPXS

ALPXS is a 2003 R&D 100 Award Winner

EVAPOCLEAN

Developed at the Institute of Physics of the Earth (Paris, France), the primary function of the EVAPOCLEAN is to preconcentrate various chemical solutions under controlled conditions. Evaporation (at temperatures up to 250 °C) and immediate condensation occur in a closed system that does not exchange with laboratory air.

The EVAPOCLEAN device allows the analyst to process organic solvents, aqueous solutions, acidic and alkaline solutions, and concentrated solutions which derive from the dissolution of various materials with aggressive reagents (HF, HCl, HBr, HNO3, HClO4, H2S04, H2O2, NH4OH). Applications include raw materials (rocks, minerals, ores, natural waters), industrial and advanced materials (cements, metals, glass products, ceramics), as well as basic chemicals for industry, highly pure chemicals, and liquid and solid wastes.

EVAPOCLEAN devices are also designed for trace and ultra-trace element analyses which require a cleanroom environment. Evaporation-condensation cells are made with non-contaminating, corrosion-resistant, high-purity grade fluoropolymer materials, machined under controlled conditions. They do not emit dust particles.

Depending on the EVAPOCLEAN model that is chosen, 1 to 12 samples can be processed simultaneously or independently, without risk of cross-contamination. It is possible to evaporate to dryness or to leave a small residual volume of the evaporating liquid, to concentrate solutions, and to purify liquid reagents.

The top face of EVAPOCLEAN devices is equipped with ports to allow acid digestion of samples and cleaning of jars by reflux of acid vapor or water vapor in the closed container.

The basic EVAPOCLEAN incorporates a simple controller which raises the block temperature to a specified temperature and holds the temperature for a specified period, after which the EVAPOCLEAN will cool to ambient temperature. An optional programmable controller stores up to four programs of sixteen segments each.

CLOSEDCLOSED--ENVIRONMENT for ENVIRONMENT for EVAPORATION, PRECONCENTRATION, EVAPORATION, PRECONCENTRATION,

DISSOLUTION, ACID DIGESTION DISSOLUTION, ACID DIGESTION

Tel: +33 (0)3 88 51 79 51 Fax: +33 (0)3 88 51 79 13 E-mail: [email protected] Web: www.analab.fr

Patented

ANALAB

Evapoclean 6.25.R1 with programmable temperature controller

EV-EVAPO.6.125.RNPModel 6.125ml: the hot block is equipped with 6 ports (side) for evaporation-condensation steps in 60, 90 or 180 ml vessels, and 14 ports (top) for sample digestion and vessel cleaning. Includes: hot block, 6 high purity PTFE elbows, 12 SAVILLEX® PFA vessels (size at your convenience), basic regulator (up, hold, down).DIM: 540mm x 160mm x 217mm (h) Weight: 30 Kg Current : 220V/115V

EV-EVAPO.12.125.RNPModel 12.125ml: the hot block is equipped with 12 ports (side) for evaporation-condensation steps in 60, 90 or 180 ml vessels, and 28 ports (top) for sample digestion and vessel cleaning. Includes: hot block, 12 high purity PTFE elbows, 24 SAVILLEX® PFA vessels (size at your convenience), basic regulator (up, hold, down).DIM. : 540mm x 290mm x 217mm (h) Weight: 60 Kg Current : 220V/115V

A programmable controller (4 programs,16 segments) is available.

EVAPOCLEAN

EV-EVAPO.6.25.RNPModel 6.25ml: the hot block is equipped with 6 ports (side) for evaporation-condensation in 17 ml or 33 ml vessels (evaporation of less than one milliliter volumes down to microliter volumes is achieved with small or micro containers) and 14 ports (top) for sample digestion and vessel cleaning. Includes: hot block, 6 high purity PTFE elbows, 12 SAVILLEX® PFA vessels (size at your convenience), basic regulator (up, hold, down).DIM: 370mm x 110mm x 171mm (h) Weight: 12 Kg Current: 220V/115V

EV-EVAPO.12.25.RNPModel 12.25ml: the hot block is equipped with 12 ports (sides) for evaporation-condensation steps in 17 ml or 33 ml vessels (using small or micro containers identical to Model 6.25 ml) and 18 ports (top) for sample digestion and vessel cleaning. Includes: hot block, 12 high purity PTFE elbows, 24 SAVILLEX® PFA vessels (size at your convenience), basic regulator (up, hold, down).DIM: 370mm x 190mm x 171mm (h) Weight: 20 Kg Current: 220V/115V

Evapoclean 12.25

EASYDIGESTANALAB has designed EASYDIGEST devices for wet digestion or wet extraction of samples using mineral acids. These acid-resistant graphite-filled-PFA monoblocks include up to 48 positions and provide controlled and homogeneous heat to the sample batch. Temperature control is achieved either with a set-point power regulator or with a programmable controller (4 programs, 16 segments each).

Standard housings accept 60ml SAVILLEX® Teflon® PFA jars or 120ml polypropylene (PP) containers. The 60ml housings accept 7 mL, 17 mL, 24 mL, 33 mL and 64mL SAVILLEX® jars by addition of acid-resistant graphite-filled-PFA adapters (sold separately). Custom housings can be manufactured to suit your containers. (Sample stirring is in development).

ED-EASY24/60ML-RPThis model has 24 positions for 60 ml SAVILLEX®

jars and a programmable temperature controller (4 programs, up to 16 segments each)306mm x 214mm x 110mm (h) Weight: 15 Kg Mains: 220 V or 110 V

ED-EASY24/60ML-RNPThis model has 24 housings for 60 ml SAVILLEX®jars with set-point temperature controller306mm x 214mm x 110mm (h) Weight: 15 Kg Mains: 220 V or 110 V

ED-EASY48/120mL-RNPThis model has 48 positions for 120 ml PP containers with set-point temperature regulator590mm x 450mm x 70mm (h) Weight: 40 KgMains: 220 V or 110 V

ED-EASY48/120mL-RPThis model has 48 positions for 120 ml PP containers and a programmable temperature controller (4 programs, up to 16 segments each)590mm x 450mm x 70mm (h) Weight : 40 KgMains: 220 V or 110 V

Options: Volume Detection: ED-DETECT.NIVEAU allows the analyst to control and to fix the volume reduction during evaporation. Lead time: 4 weeks.In-situ Temperature Monitor: ED-TEMP.IN.SITU monitors the temperature of a reference solution rather than the monoblock temperature. Lead time: 4 weeks.Container Adapters: Graphite-filled Teflon® PFA machined to adapt smaller containers to either the 60 mL or 120 mL Easydigest system.

ANALAB sarl23 route de la Wantzenau, BP 40141 Hoenheim

67804 Bischheim cedex, France


1-800-MEINHARD [email protected] www.meinhard.com

Tél: +33 (0)3 88 51 79 51 Fax: +33 (0)3 88 51 79 13 E-mail : [email protected] Web : www.analab.fr

MINI VESSEL CLEANER

Analysis for trace and ultra trace species requires appropriate cleaning of sample vessels.

This mini vessel cleaner is ideal for the cleaning of containers and accessories in PFA, PTFE…

Requires just a small quantity of reagent.

Adaptable to many sizes and shapes of vessels.

The Mini Vessel Cleaner: • has no metallic parts.• can be used on any hot plate.

containersvapor droplets

Acid bathPTFE support

Acid-resistant Hot Plate

How does it work ?Vapor rises from the bath and condenses on the vessels;

droplets carrying impurities return to the acid bath.

Principle: Cleaning is accomplished by convection and condensation of high purity acid vapors.

The process offers a very high level of purity that cannot be obtained by immersion in a bath.

ANALAB

CleanAcids®

PURIFICATIONThe Cleanacid allows you to purify your reagents (acid and alkaline solutions, organic solvents) by sub-boiling distillation. For ultra-trace analysis, purification of these reagents just before sample processing reduces or eliminates contamination which may occur during weeks or months of storage.

CLOSED ENVIRONMENTprotects your staff and laboratory against corrosive vapours. It reduces your operating costs while avoiding any investment in vapour neutralization system, scrubbers and pumps.

SIMULTANEOUS PROCESSINGof up to 12 vessels with volumes of 25mL, 125 mL and 1Liter, depending on the model.

ACID INERTAll surfaces are covered with TeflonCups are made of Teflon PFA, elbows of high quality PTFEThe 1.7 m cable between the temperature controller and the heating block allows the controller to be placed outside the corrosive area

Patented

Technical Data

Cleanacid

Models: 1 position for purification of 1 Liter3, 6 or 12 positions for purification of 25 mL or 125 mL (with 6, 12 or 24 positionsfor mineralization)Includes 1, 3, 6 or 12 elbows and corresponding 33 mL,180 mL, 2 L vesselsthermal protection

Voltage: 230 Volts (100-110 Volts upon request)

Temperature: Ambient to 235°C Uniformity +/- 2°C3 over temperature protections (available)

Material: Hot block: PFA coated graphiteVessels: PFAElbows: high quality PTFE

Temperature controller

Models: basic up/down (RNP)programmable: 4 programs of 16 segments (RP)These 2 models can be equipped with an additional screen for monitoring of thein situ temperature or a recording device Easylog (please consult us).

Voltage: 230 Volts (100-110 Volts upon request)

Options

In situ probe for monitoring vessel temperature, to be used with the suitable controllerCovers for cleaning of the PFA vesselsStand for elbowsCooling system to improve the rate of condensation and reagent production by up to 3-foldAcid inert pump to feed the acid (1 liter model )

Products manufactured by analabSubject to technical changesCertification: CEM 89/336/CEE LVD 73/23/CEE EN 61010Warranty: 1 year on electrical/electronic parts, 2 years on defects in construction

analabwww.analab.euEmail: [email protected]: +33 (0)3 88 51 79 51Fax: +33 (0)3 88 51 79 1323 route de la WantzenauBP 40141, Hoenheim67804 Bischheim, FRANCE

Meinhard Glass Productswww.meinhard.comEmail: [email protected]: 303.277.9776Fax: 303.216.2649700 Corporate Circle, Suite AGolden, Colorado 80401USA

E-MAIL: [email protected] WEB: WWW.ARMI.COM

TELEPHONE: (303) 216-2621

FAX: (303) 216-2649

700 CORPORATE CIRCLE, SUITE A GOLDEN, CO 80401

USA

IN THE US AND CANADA CALL OR FAX TOLL FREE

TELEPHONE: (800) 421-9454 FAX (800) 421-1445

“Application-Specific” means just that, IARMs that

are readily available in the physical forms necessary to supply the calibration needs of your laboratory. In addi-tion to our original thin disks for X-ray methods, all CRMs are available in physical forms tailored to your specific applications; thick solid disks for Optical Emis-sion and Glow Discharge spectrometry, and chips for wet chemical or solution instrumental techniques (ICP, AA, etc.). Also, for combustion analysis, chips are available to analyze carbon and sulfur.

THE LEADER IN “APPLICATION-SPECIFIC” CERTIFIED REFERENCE MATERIALS

IARMS INTERNATIONAL ANALYTICAL

REFERENCE MATERIALS

CELEBRATING EXCELLENCE SINCE 1984 Analytical Reference Materials International’s (ARMI) primary objective has been to develop and implement an industry acceptable system for the characterization and certification of metal alloy materials. The resulting Certified Reference Materi-als (CRMs) afford the scientific community an unequivocal level of confidence. Equally important is our desire that the final certified results be traceable to national and/or international certifying bodies with emphasis on our own National Institute of Standards & Technology (NIST). In the beginning, the Company purchased metal certified materials from recognized certifying bodies and produced what is now known the world over as the “thin X-ray disk” specific to X-ray analytical procedures. Because of the success of the thin X-ray disks during the late 1980s, demand dramatically increased for more of a variety of products to address the needs of all analytical techniques. The Company reached a point where it became obvious that its dependence on others to supply materials and data limited its ability to meet the market’s existing and future needs. Therefore, in 1989 the ARMI Inter-Laboratory Analysis Program (ILAP) was formed. The ILAP originated and remains today as the only totally voluntary organization in private industry dedicated to the production and development of quality CRMs. ILAP is the classic example of industry working together for a common goal. The membership now consists of experts from over 70 laboratories represent-ing major metal producers, commercial laboratories, aerospace, and general industry from the US, Canada and other countries in Europe and Asia. The group is com-prised of wonderfully dedicated people who are experts in the analysis of metals and metal alloys. Today ARMI’s inventory consists of more than 600 different CRMs that include car-bon steels, low alloy steels, stainless and high temperature steels, nickel, cobalt, cop-per, aluminum, titanium, and hydrocarbon based materials. ARMI’s CRMs (IARMs) can be found in the application laboratories of most of the major instrument manufac-turers around the world. Finally, one of the major factors contributing to the success of the ARMI/ILAP pro-gram over the years has been “you”, the analytical consumer. You have voiced your opinions as well as your needs. The personnel at ARMI, as well as the ILAP mem-bers, wish to sincerely thank you for your continued suggestions and support and of-fer our pledge to enthusiastically make every effort possible to respond to your needs in the years to come.

Meinhard Glass Products is a division of Analytical Reference Materials International, 700 Corporate Circle, Suite A, Golden, Colorado 80401 USA Tel: 303.277.9776 Fax: 303.216.2649 Web: www.meinhard.com Email: [email protected]

Pittcon 2009 – New Products – Featured Products

EasySeal Spray Chamber Inlet – Secure, Clean, Economical

Fit Kit 3T – Solution Inlet or Spray Chamber Drain Included With Every Nebulizer

Laser Ablation Gas Mixing Chamber Standard and Flared-end Peristaltic

Pump Tubing

Meinhard Glass Products is a division of Analytical Reference Materials International, 700 Corporate Circle, Suite A, Golden, Colorado 80401 USA Tel: 303.277.9776 Fax: 303.216.2649 Web: www.meinhard.com Email: [email protected]

Pittcon 2009 – New Products – Featured Products

ALPXS – Aerosol-to-Liquid Particle Extraction System Electrostatically extracts airborne particulates into liquid for rapid sampling and analysis.

Prodigy DC Arc Spectrometer

A dramatic improvement to the classic technique for direct analysis of solids.

Meinhard Glass Products A Division of Analytical Reference Materials International 700 Corporate Circle, Suite A Golden, Colorado 80401 USA


consumables and accessories for icp and · pdf filemarch 2009 consumables and accessories for...

Documents