construction: high performance cut and loop · specifications are based on averages from ... please...

38
H4

Upload: truongdung

Post on 04-May-2018

213 views

Category:

Documents


0 download

TRANSCRIPT

H4

7.2016

PATTERN: HOLIDAY INN -H4 - I38283 HIG-CPT01.1.2 (A) - GUESTROOMS

REPEAT: 60” W X 60” L

CONSTRUCTION: HIGH PERFORMANCE CUT AND LOOP

Colors are approximation only. Please refer to the Signature Pom Set for actual colors.A

3188

B

3721

C

3005/3188

HOLIDAY INN H4 - I38283 HIG-CPT01.1.2 (A)

GUESTROOMS

HIGH PERFORMANCE CUT AND LOOP

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 32 OZ. PER SQ. YD.STITCH RATE: 15 SPIPILE HEIGHT: .181 AVERAGEDENSITY FACTOR: 6,364WEIGHT DENSITY FACTOR: 229,104TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: 60’’ W X 60’’ LPRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: HIGH PERFORMANCE ACTIONBAC®

WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitate specification changes without notice. such variations do not affect product performance.

this carpet is manufactured and recommended for floor covering use only. as in all quality carpet, colors are subject to dye lot variations. for optimum side match and finished seam appearance, this product should be installed whenever possible, with seams running perpendicular to major external (outside) light sources.

the equipment used to manufacture patterned carpet may create visible lines in both length and width directions. this characteristic will not always be detectable in small samples and is not considered a manufacturing defect. as with all patterned carpets, perfect pattern match may not be obtainable at seams. tolerances in pattern registration – bow and skew – are to be expected. all seams and cut edges at doors and closets must be seam sealed.

chair pads are recommended under chairs with rollers to preserve appearance retention, avoid premature or accelerated wear, and act as a deterrent toward delamination. special backing systems are available that do not require chair pads. walk off mats are recommended at building entry ways to reduce soiling.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.

7.2016

PATTERN: HOLIDAY INN -H4 -I40494 HIG-CPT01.2.2 (A) - GUESTROOMS

REPEAT: 144” W X 144” L

CONSTRUCTION: HIGH PERFORMANCE CUT AND LOOP

Colors are approximation only. Please refer to the Signature Pom Set for actual colors.A

M12/3422

B

3700

HOLIDAY INN H4 -I40494 HIG-CPT01.2.2 (A)

GUESTROOMS

HIGH PERFORMANCE CUT AND LOOP

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 32 OZ. PER SQ. YD.STITCH RATE: 14.6 SPIPILE HEIGHT: .218 AVERAGEDENSITY FACTOR: 5,284WEIGHT DENSITY FACTOR: 190,224TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: 144’’ W X 144’’ LPRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: HIGH PERFORMANCE ACTIONBAC®

WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitate specification changes without notice. such variations do not affect product performance.

this carpet is manufactured and recommended for floor covering use only. as in all quality carpet, colors are subject to dye lot variations. for optimum side match and finished seam appearance, this product should be installed whenever possible, with seams running perpendicular to major external (outside) light sources.

the equipment used to manufacture patterned carpet may create visible lines in both length and width directions. this characteristic will not always be detectable in small samples and is not considered a manufacturing defect. as with all patterned carpets, perfect pattern match may not be obtainable at seams. tolerances in pattern registration – bow and skew – are to be expected. all seams and cut edges at doors and closets must be seam sealed.

chair pads are recommended under chairs with rollers to preserve appearance retention, avoid premature or accelerated wear, and act as a deterrent toward delamination. special backing systems are available that do not require chair pads. walk off mats are recommended at building entry ways to reduce soiling.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.

7.2016

PATTERN: HOLIDAY INN -H4 -I40495 HIG-CPT01.3.2 (A) - GUESTROOMS

REPEAT: 144” W X 144” L

CONSTRUCTION: HIGH PERFORMANCE CUT AND LOOP

Colors are approximation only. Please refer to the Signature Pom Set for actual colors.A

M12/3422

B

M11/197

HOLIDAY INNH4 -I40495 HIG-CPT01.3.2 (A)

GUESTROOMS

HIGH PERFORMANCE CUT AND LOOP

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 32 OZ. PER SQ. YD.STITCH RATE: 14.6 SPIPILE HEIGHT: .218 AVERAGEDENSITY FACTOR: 5,284WEIGHT DENSITY FACTOR: 190,224TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: 144’’ W X 144’’ LPRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: HIGH PERFORMANCE ACTIONBAC®

WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitate specification changes without notice. such variations do not affect product performance.

this carpet is manufactured and recommended for floor covering use only. as in all quality carpet, colors are subject to dye lot variations. for optimum side match and finished seam appearance, this product should be installed whenever possible, with seams running perpendicular to major external (outside) light sources.

the equipment used to manufacture patterned carpet may create visible lines in both length and width directions. this characteristic will not always be detectable in small samples and is not considered a manufacturing defect. as with all patterned carpets, perfect pattern match may not be obtainable at seams. tolerances in pattern registration – bow and skew – are to be expected. all seams and cut edges at doors and closets must be seam sealed.

chair pads are recommended under chairs with rollers to preserve appearance retention, avoid premature or accelerated wear, and act as a deterrent toward delamination. special backing systems are available that do not require chair pads. walk off mats are recommended at building entry ways to reduce soiling.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.

7.2016

PATTERN: HOLIDAY INN -H4 -I40487 HIP-CPT01.1.2 (A) - CORRIDORS

REPEAT: 72” W X 61.5” L

CONSTRUCTION: HIGH PERFORMANCE CUT AND LOOP

Colors are approximation only. Please refer to the Signature Pom Set for actual colors.A

3720

B

3130

HOLIDAY INNH4 -I40487 HIP-CPT01.1.2 (A)

CORRIDORS

HIGH PERFORMANCE CUT AND LOOP

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 36 OZ. PER SQ. YD.STITCH RATE: 17 SPIPILE HEIGHT: .181 AVERAGEDENSITY FACTOR: 7,160WEIGHT DENSITY FACTOR: 257,760TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: 72’ W X 61.5’’ LPRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: HIGH PERFORMANCE ACTIONBAC®

WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitate specification changes without notice. such variations do not affect product performance.

this carpet is manufactured and recommended for floor covering use only. as in all quality carpet, colors are subject to dye lot variations. for optimum side match and finished seam appearance, this product should be installed whenever possible, with seams running perpendicular to major external (outside) light sources.

the equipment used to manufacture patterned carpet may create visible lines in both length and width directions. this characteristic will not always be detectable in small samples and is not considered a manufacturing defect. as with all patterned carpets, perfect pattern match may not be obtainable at seams. tolerances in pattern registration – bow and skew – are to be expected. all seams and cut edges at doors and closets must be seam sealed.

chair pads are recommended under chairs with rollers to preserve appearance retention, avoid premature or accelerated wear, and act as a deterrent toward delamination. special backing systems are available that do not require chair pads. walk off mats are recommended at building entry ways to reduce soiling.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.

7.2016

PATTERN: HOLIDAY INN -H4 - I38281 HIP-CPT01.2.2 (A) - CORRIDORS

REPEAT: 36” W X 26.5” L

CONSTRUCTION: HIGH PERFORMANCE CUT AND LOOP

Colors are approximation only. Please refer to the Signature Pom Set for actual colors.A

M12/3422

B

M11/197

HOLIDAY INNH4 - I38281 HIP-CPT01.2.2 (A)

CORRIDORS

HIGH PERFORMANCE CUT AND LOOP

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 36 OZ. PER SQ. YD.STITCH RATE: 17.5 SPIPILE HEIGHT: .181 AVERAGEDENSITY FACTOR: 7,160WEIGHT DENSITY FACTOR: 257,760TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: 36’’ W X 26.5’’ LPRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: HIGH PERFORMANCE ACTIONBAC®

WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitate specification changes without notice. such variations do not affect product performance.

this carpet is manufactured and recommended for floor covering use only. as in all quality carpet, colors are subject to dye lot variations. for optimum side match and finished seam appearance, this product should be installed whenever possible, with seams running perpendicular to major external (outside) light sources.

the equipment used to manufacture patterned carpet may create visible lines in both length and width directions. this characteristic will not always be detectable in small samples and is not considered a manufacturing defect. as with all patterned carpets, perfect pattern match may not be obtainable at seams. tolerances in pattern registration – bow and skew – are to be expected. all seams and cut edges at doors and closets must be seam sealed.

chair pads are recommended under chairs with rollers to preserve appearance retention, avoid premature or accelerated wear, and act as a deterrent toward delamination. special backing systems are available that do not require chair pads. walk off mats are recommended at building entry ways to reduce soiling.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.

7.2016

PATTERN: HOLIDAY INN -H4 -C40489 HIG-B01.2.2 (A) - AMBER GR WALL BASE

REPEAT: SOLID 4’’ BASE

CONSTRUCTION: 1/10TH CUT PILE

Colors are approximation only. Please refer to the Signature Pom Set for actual colors.A

3188

HOLIDAY INNH4 -C40489 HIG-B01.2.2 (A)

AMBER GR WALL BASE

1/10TH CUT PILE

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 30 OZ. PER SQ. YD.STITCH RATE: 13 SPIPILE HEIGHT: .218 AVERAGEDENSITY FACTOR: 4,954WEIGHT DENSITY FACTOR: 178,344TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: SOLID 4’’ BASEPRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: ACTIONBAC®WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitate specification changes without notice. such variations do not affect product performance.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.

HOLIDAY INNH4 -C40490 HIG-B01.3.2 (A)

AMBER GR WALL BASE

1/10TH CUT PILE

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 30 OZ. PER SQ. YD.STITCH RATE: 13 SPIPILE HEIGHT: .218 AVERAGEDENSITY FACTOR: 4,954WEIGHT DENSITY FACTOR: 178,344TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: SOLID 4’’ BASEPRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: ACTIONBAC®WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitate specification changes without notice. such varia-tions do not affect product performance.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.

HOLIDAY INNH4 -C40490 HIG-B01.2.2 (A)

AMBER GR WALL BASE

1/10TH CUT PILE

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 30 OZ. PER SQ. YD.STITCH RATE: 13 SPIPILE HEIGHT: .218 AVERAGEDENSITY FACTOR: 4,954WEIGHT DENSITY FACTOR: 178,344TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: SOLID 4’’ BASEPRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: ACTIONBAC®WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitate specification changes without notice. such varia-tions do not affect product performance.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.

7.2016

PATTERN: HOLIDAY INN -H4 -C40610 HIP-B01.2.2 (A) - AMBER CORRIDOR BASE

REPEAT: SOLID 6’’ BASE

CONSTRUCTION: 1/10TH CUT PILE

Colors are approximation only. Please refer to the Signature Pom Set for actual colors.A

3130

HOLIDAY INN H4 -C40610 HIP-B01.2.2 (A)

AMBER CORRIDOR BASE

1/10TH CUT PILE

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 30 OZ. PER SQ. YD.STITCH RATE: 13 SPIPILE HEIGHT: .218 AVERAGEDENSITY FACTOR: 4,954WEIGHT DENSITY FACTOR: 178,344TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: SOLID 6’’ BASEPRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: ACTIONBAC®WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitate specification changes without notice. such variations do not affect product performance.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.

7.2016

PATTERN: HOLIDAY INN -H4 -C40492 HIP-B01.3.2 (A) - AMBER CORRIDOR BASE

REPEAT: SOLID 6’’ BASE

CONSTRUCTION: 1/10TH CUT PILE

Colors are approximation only. Please refer to the Signature Pom Set for actual colors.A

M11/197

HOLIDAY INNH4 -C40492 HIP-B01.3.2 (A)

AMBER CORRIDOR BASE

1/10TH CUT PILE

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 30 OZ. PER SQ. YD.STITCH RATE: 13 SPIPILE HEIGHT: .218 AVERAGEDENSITY FACTOR: 4,954WEIGHT DENSITY FACTOR: 178,344TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: SOLID 6’’ BASEPRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: ACTIONBAC®WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitate specification changes without notice. such variations do not affect product performance.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.

7.2016

PATTERN: ` HOLIDAY INN -H4 - I38282 HIG-CPT01.1.2 (C) - GUESTROOMS

REPEAT: 60” W X 60” L

CONSTRUCTION: HIGH PERFORMANCE CUT AND LOOP

Colors are approximation only. Please refer to the Signature Pom Set for actual colors.A

3112

B

3191

C

3342

HOLIDAY INN H4 - I38282 HIG-CPT01.1.2 (C)

GUESTROOMS

HIGH PERFORMANCE CUT AND LOOP

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 32 OZ. PER SQ. YD.STITCH RATE: 15 SPIPILE HEIGHT: .181 AVERAGEDENSITY FACTOR: 6,364WEIGHT DENSITY FACTOR: 229,104TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: 60’’ W X 60’’ LPRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: HIGH PERFORMANCE ACTIONBAC®

WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitate specification changes without notice. such variations do not affect product performance.

this carpet is manufactured and recommended for floor covering use only. as in all quality carpet, colors are subject to dye lot variations. for optimum side match and finished seam appearance, this product should be installed whenever possible, with seams running perpendicular to major external (outside) light sources.

the equipment used to manufacture patterned carpet may create visible lines in both length and width directions. this characteristic will not always be detectable in small samples and is not considered a manufacturing defect. as with all patterned carpets, perfect pattern match may not be obtainable at seams. tolerances in pattern registration – bow and skew – are to be expected. all seams and cut edges at doors and closets must be seam sealed.

chair pads are recommended under chairs with rollers to preserve appearance retention, avoid premature or accelerated wear, and act as a deterrent toward delamination. special backing systems are available that do not require chair pads. walk off mats are recommended at building entry ways to reduce soiling.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.

7.2016

PATTERN: HOLIDAY INN -H4 -I40493 HIG-CPT01.2.2 (C) - GUESTROOMS

REPEAT: 144” W X 144” L

CONSTRUCTION: HIGH PERFORMANCE CUT AND LOOP

Colors are approximation only. Please refer to the Signature Pom Set for actual colors.A

3191

B

M11/197

HOLIDAY INNH4 -I40493 HIG-CPT01.2.2 (C)

GUESTROOMS

HIGH PERFORMANCE CUT AND LOOP

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 32 OZ. PER SQ. YD.STITCH RATE: 14.6 SPIPILE HEIGHT: .218 AVERAGEDENSITY FACTOR: 5,284WEIGHT DENSITY FACTOR: 190,224TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: 144’’ W X 144’’ LPRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: HIGH PERFORMANCE ACTIONBAC®

WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitate specification changes without notice. such variations do not affect product performance.

this carpet is manufactured and recommended for floor covering use only. as in all quality carpet, colors are subject to dye lot variations. for optimum side match and finished seam appearance, this product should be installed whenever possible, with seams running perpendicular to major external (outside) light sources.

the equipment used to manufacture patterned carpet may create visible lines in both length and width directions. this characteristic will not always be detectable in small samples and is not considered a manufacturing defect. as with all patterned carpets, perfect pattern match may not be obtainable at seams. tolerances in pattern registration – bow and skew – are to be expected. all seams and cut edges at doors and closets must be seam sealed.

chair pads are recommended under chairs with rollers to preserve appearance retention, avoid premature or accelerated wear, and act as a deterrent toward delamination. special backing systems are available that do not require chair pads. walk off mats are recommended at building entry ways to reduce soiling.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.

7.2016

PATTERN: HOLIDAY INN -H4 -I40495 HIG-CPT01.3.2 (C) - GUESTROOMS

REPEAT: 144” W X 144” L

CONSTRUCTION: HIGH PERFORMANCE CUT AND LOOP

Colors are approximation only. Please refer to the Signature Pom Set for actual colors.A

M12/3422

B

M11/197

HOLIDAY INNH4 -I40495 HIG-CPT01.3.2 (C)

GUESTROOMS

HIGH PERFORMANCE CUT AND LOOP

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 32 OZ. PER SQ. YD.STITCH RATE: 14.6 SPIPILE HEIGHT: .218 AVERAGEDENSITY FACTOR: 5,284WEIGHT DENSITY FACTOR: 190,224TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: 144’’ W X 144’’ LPRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: HIGH PERFORMANCE ACTIONBAC®

WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitate specification changes without notice. such variations do not affect product performance.

this carpet is manufactured and recommended for floor covering use only. as in all quality carpet, colors are subject to dye lot variations. for optimum side match and finished seam appearance, this product should be installed whenever possible, with seams running perpendicular to major external (outside) light sources.

the equipment used to manufacture patterned carpet may create visible lines in both length and width directions. this characteristic will not always be detectable in small samples and is not considered a manufacturing defect. as with all patterned carpets, perfect pattern match may not be obtainable at seams. tolerances in pattern registration – bow and skew – are to be expected. all seams and cut edges at doors and closets must be seam sealed.

chair pads are recommended under chairs with rollers to preserve appearance retention, avoid premature or accelerated wear, and act as a deterrent toward delamination. special backing systems are available that do not require chair pads. walk off mats are recommended at building entry ways to reduce soiling.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.

7.2016

PATTERN: HOLIDAY INN -H4 -I40488 HIP-CPT01.1.2 (C) - CORRIDORS

REPEAT: 72” W X 61.5” L

CONSTRUCTION: HIGH PERFORMANCE CUP AND LOOP

Colors are approximation only. Please refer to the Signature Pom Set for actual colors.A

3140

B

3191

HOLIDAY INN H4 -I40488 HIP-CPT01.1.2 (C)

CORRIDORS

HIGH PERFORMANCE CUT AND LOOP

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 36 OZ. PER SQ. YD.STITCH RATE: 17 SPIPILE HEIGHT: .181 AVERAGEDENSITY FACTOR: 7,160WEIGHT DENSITY FACTOR: 257,760TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: 72’’ W X 61.5’’ LPRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: HIGH PERFORMANCE ACTIONBAC®

WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitate specification changes without notice. such variations do not affect product performance.

this carpet is manufactured and recommended for floor covering use only. as in all quality carpet, colors are subject to dye lot variations. for optimum side match and finished seam appearance, this product should be installed whenever possible, with seams running perpendicular to major external (outside) light sources.

the equipment used to manufacture patterned carpet may create visible lines in both length and width directions. this characteristic will not always be detectable in small samples and is not considered a manufacturing defect. as with all patterned carpets, perfect pattern match may not be obtainable at seams. tolerances in pattern registration – bow and skew – are to be expected. all seams and cut edges at doors and closets must be seam sealed.

chair pads are recommended under chairs with rollers to preserve appearance retention, avoid premature or accelerated wear, and act as a deterrent toward delamination. special backing systems are available that do not require chair pads. walk off mats are recommended at building entry ways to reduce soiling.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.

7.2016

PATTERN: HOLIDAY INN -H4 - I38280 HIP-CPT01.2.2 (C) - CORRIDORS

REPEAT: 36” W X 26.5” L

CONSTRUCTION : HIGH PERFORMANCE CUT AND LOOP

Colors are approximation only. Please refer to the Signature Pom Set for actual colors.A

M11/197

B

3191

HOLIDAY INN H4 - I38280 HIP-CPT01.2.2 (C)

CORRIDORS

HIGH PERFORMANCE CUT AND LOOP

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 36 OZ. PER SQ. YD.STITCH RATE: 17.5 SPIPILE HEIGHT: .181 AVERAGEDENSITY FACTOR: 7,160WEIGHT DENSITY FACTOR: 257,760TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: 36’’ W X 26.5’’ LPRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: HIGH PERFORMANCE ACTIONBAC®

WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitate specification changes without notice. such variations do not affect product performance.

this carpet is manufactured and recommended for floor covering use only. as in all quality carpet, colors are subject to dye lot variations. for optimum side match and finished seam appearance, this product should be installed whenever possible, with seams running perpendicular to major external (outside) light sources.

the equipment used to manufacture patterned carpet may create visible lines in both length and width directions. this characteristic will not always be detectable in small samples and is not considered a manufacturing defect. as with all patterned carpets, perfect pattern match may not be obtainable at seams. tolerances in pattern registration – bow and skew – are to be expected. all seams and cut edges at doors and closets must be seam sealed.

chair pads are recommended under chairs with rollers to preserve appearance retention, avoid premature or accelerated wear, and act as a deterrent toward delamination. special backing systems are available that do not require chair pads. walk off mats are recommended at building entry ways to reduce soiling.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.

7.2016

PATTERN: HOLIDAY INN -H4 -C38293 HIG-B01.2.2 (C) - CORAL GR WALL BASE

REPEAT: SOLID 4’’ BASE

CONSTRUCTION: 1/10TH CUT PILE

Colors are approximation only. Please refer to the Signature Pom Set for actual colors.A

3191

HOLIDAY INN H4 -C38293 HIG-B01.2.2 (C)

CORAL GR WALL BASE

1/10TH CUT PILE

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 30 OZ. PER SQ. YD.STITCH RATE: 13 SPIPILE HEIGHT: .218 AVERAGEDENSITY FACTOR: 4,954WEIGHT DENSITY FACTOR: 148,620TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: SOLID 4’’ BASE PRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: ACTIONBAC®WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitate specification changes without notice. such variations do not affect product performance.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.

7.2016

PATTERN: HOLIDAY INN -H4 -C40492 HIG-B01.3.2 (C) - CORAL GR WALL BASE

REPEAT: SOLID 4’’ BASE

CONSTRUCTION: 1/10TH CUT PILE

Colors are approximation only. Please refer to the Signature Pom Set for actual colors.A

M11/197

HOLIDAY INNH4 -C40492 HIG-B01.3.2 (C)

CORAL GR WALL BASE

1/10TH CUT PILE

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 30 OZ. PER SQ. YD.STITCH RATE: 13 SPIPILE HEIGHT: .218 AVERAGEDENSITY FACTOR: 4,954WEIGHT DENSITY FACTOR: 178,344TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: SOLID 4’’ BASEPRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: ACTIONBAC®WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitate specification changes without notice. such variations do not affect product performance.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.

7.2016

PATTERN: HOLIDAY INN -H4 -C38293 HIP-B01.2.2 (C) - CORAL CORRIDOR BASE

REPEAT: SOLID 6’’ BASE

CONSTRUCTION: 1/10TH CUT PILE

Colors are approximation only. Please refer to the Signature Pom Set for actual colors.A

3191

Holiday InnH4 -C38293 HIP-B01.2.2 (C)

Coral Corridor Base

1/10TH CUT PILE

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 30 OZ. PER SQ. YD.STITCH RATE: 13 SPIPILE HEIGHT: .218 AVERAGEDENSITY FACTOR: 4,954WEIGHT DENSITY FACTOR: 178,344TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: SOLID 6’’ BASEPRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: ACTIONBAC®WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitate specification changes without notice. such variations do not affect product performance.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.

7.2016

PATTERN: HOLIDAY INN -H4 -C40492 HIP-B01.3.2 (C) - CORAL CORRIDOR BASE

REPEAT: SOLID 6’’ BASE

CONSTRUCTION: 1/10TH CUT PILE

Colors are approximation only. Please refer to the Signature Pom Set for actual colors.A

M11/197

HOLIDAY INNH4 -C40492 HIP-B01.3.2 (C)

CORAL CORRIDOR BASE

1/10TH CUT PILE

DYE METHOD: SOLUTIONPILE FIBER: 100% SDNTUFTED PILE WEIGHT: 30 OZ. PER SQ. YD.STITCH RATE: 13 SPIPILE HEIGHT: .218 AVERAGEDENSITY FACTOR: 4,954WEIGHT DENSITY FACTOR: 178,344TOPICAL STAIN TREATMENT: SCOTCHGARD® & STAIN RELEASE AVAILABLEWIDTH: 12’ PATTERN REPEAT: SOLID 6’’ BASEPRIMARY BACKING: WOVEN POLYPROPYLENESECONDARY BACKING: ACTIONBAC®WARRANTY: TEN (10) YEAR LIMITED WEAR

CERTIFICATION: CRI GLP2121ASTM E-648 FLOORING RADIANT PANEL: CLASS IDOC-FF-1-70 METHENAMINE PILL TEST: PASSESAATCC 134 ELECTROSTATIC PROPENSITY: < 3.5 KVE0622 CHAMBER: LESS THAN 450

7.2016

specifications are based on averages from manufacturing processes and may vary within normal industry tolerances. material supply and /or manufacturing processes may necessitatespecification changes without notice. such variations do not affect product performance.

please call signature’s technical services department at 800-809-7086 for any questions or assistance.