connecting a panasonic bm-et200 iris reader to net2...connecting a panasonic bm-et200 iris reader to...
TRANSCRIPT
-
+44 (0)1273 811011
paxton.support
+44 (0)1273 811011
paxton.support
+1(800) 672-7298
usapaxton.support
+49 (0) 251 2080 6900
paxton.gmbh.support
+27 (0)21 4276691
paxton.support
+11 5715088198
paxton.soporte
+33 (0)157 329356
paxton.support
+31 (0)76 3333 999
paxton.benelux.support
+32 (0)78485147
paxton.benelux.support
8000 3570 3783
paxton.support
+1 (864) 751-3501
paxton.soporte
Connecting a Panasonic BM-ET200 Iris reader to Net2Overview
3rd Party
Ensure any unused wires are safely terminated.
ACU terminal+12V
Red LED
Amber LED
Green LED
Wiegand D0
Wiegand D1
NOT USED
0V
Cable Pinout--
Access control panel - Gnd8
Access control panel - Data 110
Access control panel - Data 09
--
--
--
--
The Option Board (BM-ETA201E) will be required for integration with Net2, this board provides the Weigand output.
The software setup of the reader should be carried out by Panasonic technicians. The system users need to be setup on the Panasonic software before integrating with Net2.
Note: This product is now obselete
SW1 OFF SW2 1&2 ON 3&4 OFF
1