connecting a nedap anpr to net2 - paxton-access.co.uk readers//197.pdf · the reader type in net2...

Connecting a Nedap ANPR to Net2 Overview 3rd Party Ensure any unused wires are safely terminated. ACU terminal +12V Red LED Amber LED Green LED Wiegand D0 Wiegand D1 NOT USED 0V Cable Pinout - - Wiegand D0 9 Wiegand D1 10 Wiegand Gnd 7 - - - - - - - - The reader type in Net2 should be set to: ANPR 26 bit Wiegand reader. The token data format should be set to : ANPR 26 bit Wiegand. Further information: AN1103 - Using an Automatic Number Plate Reader (ANPR)< http://paxton.info/1762 > or call Technical Support for further information. The reader is a self contained unit running on 24V DC. A Wiegand inteface module provides Net2 with a 26 bit Wiegand output that is compatible with the Net2 ANPR settings. The ANPR reader has two data cables. One connects to the Wiegand interface with a 10 pin plug and the other has an RJ45 connector which may be used to connect the reader to a PC LAN port to view the camera output and other settings. The reader is conﬁgured for Paxton use and the PC connection is not required for setup or normal operation. Using the bracket provided, mount the reader to a wall or post in clear line of sight to the approaching vehicle. The range is 3 to 6 metres and covers a width of 3.5 metres. The only installer wiring is to connect the interface to the Net2 reader port using the diagram above. 24V Power supplies are provided for the camera and interface. A detailed speciﬁcation may be found at: http://www.nedapavi.com/products/anpr-camera/529.html 1

Upload: trinhkiet

Post on 19-Mar-2018

226 views

Category:

Documents

1 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: Connecting a Nedap ANPR to Net2 - paxton-access.co.uk readers//197.pdf · The reader type in Net2 should be set to: ANPR 26 bit Wiegand reader. The token data format should be set

+44 (0)1273 811011

paxton.support

[email protected]

+44 (0)1273 811011

paxton.support

[email protected]

+1(800) 672-7298

usapaxton.support

[email protected]

+49 (0) 251 2080 6900

paxton.gmbh.support

[email protected]

+27 (0) 272 14276691

paxton.support

[email protected]

+33 (0)157 329356

[email protected]

paxton.support

+31 (0)76 3333 999

paxton.benelux.support

[email protected]

8000 3570 3783

paxton.support

[email protected]

+1 (864) 751-3501

[email protected]

paxton.soporte

Connecting a Nedap ANPR to Net2Overview

3rd Party

Ensure any unused wires are safely terminated.

ACU terminal+12V

Red LED

Amber LED

Green LED

Wiegand D0

Wiegand D1

NOT USED

Cable Pinout--

Wiegand D09

Wiegand D110

Wiegand Gnd7

The reader type in Net2 should be set to: ANPR 26 bit Wiegand reader.The token data format should be set to : ANPR 26 bit Wiegand.

Further information: AN1103 - Using an Automatic Number Plate Reader (ANPR)< http://paxton.info/1762 > or call Technical Support for further information.

The reader is a self contained unit running on 24V DC. A Wiegand inteface module provides Net2 with a 26 bit Wiegand output that is compatible with the Net2 ANPR settings.

The ANPR reader has two data cables. One connects to the Wiegand interface with a 10 pin plug and the other has an RJ45 connector which may be used to connect the reader to a PC LAN port to view the camera output and other settings. The reader is configured for Paxton use and the PC connection is not required for setup or normal operation.

Using the bracket provided, mount the reader to a wall or post in clear line of sight to the approaching vehicle. The range is 3 to 6 metres and covers a width of 3.5 metres.

The only installer wiring is to connect the interface to the Net2 reader port using the diagram above.

24V Power supplies are provided for the camera and interface.

A detailed specification may be found at:

http://www.nedapavi.com/products/anpr-camera/529.html

Connecting a iEVO biometric reader to Net2 · Connecting a iEVO biometric reader to Net2 Overview 3rd Party Net2 software must be v4.18 or higher. iEVO provide a CD with a compatible

Contents ANPR...Contents 1 Overview ..... 2 HIKVISION ANPR Setup for Paxton Net2 1 Overview The document is mainly used to introduce how to install Hikvision ANPR Wiegand camera and

Net2 Installer Guide

ge-waldbroel.nw.lo-net2.dege-waldbroel.nw.lo-net2.de/physik-gk1-abi2019/Protokolle...ge-waldbroel.nw.lo-net2.de ... anagøagaa4

Net2 Desktop reader - Paxton

ANPR Cameramultimedia.3m.com/mws/media/968661O/anpr-camera.pdf...3M™ ANPR Camera ANPR camera with built in illuminator and processor. Overview Featuring high memory storage and fast

Organizadores - ANPR

Connecting a Nedap ANPR to Net2 - Access Control UK readers//112.pdf · +44 (0)1273 11011 paxton.support supportpaxton.co.uk +44 (0)1273 11011 paxton.support supportpaxton.co.uk +1(00)