configured 2668 series datasheet

2
2668 SERIES PRESSURE/VACUUM (HIGH PRESSURE) BASE MODELS AC Voltage 2668E44XNTLSXX (115/60/1) 2668N44XNTLSXX (230/50/60/1) 2668S44XNTLSXX (100/50/60/1) CUSTOM CONFIGURED OPTIONS AC Voltage Stroke (Flow and/or pressure) Pump restart Head port thread Foot tap thread Electrical cord Piston seal Fan guard Protective coating AFTERMARKET SERVICE KITS SK2668 FEATURES (BENEFITS) Oil-less operation (Clean air stream, less maintenance) Permanently lubricated bearings (Optimum life) Stainless steel valves (Optimum life, consistent performance, corrosion resistance) Die-cast aluminum components (Strong, lightweight, durable) Dynamically balanced (Low operating vibration) Proven WOB-L ® technology (Optimum life) Monolithic head (Fewer parts, eliminates potential leak paths) Field service capability (Maximum return on investment) Thermally protected motor (Fail-safe operation) Designed and tested per Agency standards (Fail-safe operation) Inlet filter/exhaust muffler (Quiet, clean operation) RoHS compliant (Green, eco-friendly) Qualified OEM designers should consult factory for purchase or custom configurations 920-457-4891 or [email protected] • Minimum order quantities may apply 2668 Series Thomas Division is an ISO 9001 certified company

Upload: maverick23113636

Post on 22-Apr-2015

44 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: Configured 2668 Series Datasheet

2668 SERIES PRESSURE/VACUUM

(HIGH PRESSURE)

BASE MODELSAC Voltage2668E44XNTLSXX (115/60/1)

2668N44XNTLSXX (230/50/60/1)

2668S44XNTLSXX (100/50/60/1)

CUSTOM CONFIGURED OPTIONSAC Voltage• Stroke (Flow and/or pressure)

• Pump restart• Head port thread• Foot tap thread• Electrical cord• Piston seal• Fan guard• Protective coating

AFTERMARKETSERVICE KITSSK2668

FEATURES (BENEFITS)• Oil-less operation (Clean air stream, less maintenance)• Permanently lubricated bearings (Optimum life)• Stainless steel valves (Optimum life, consistent performance, corrosion resistance)• Die-cast aluminum components (Strong, lightweight, durable)• Dynamically balanced (Low operating vibration)• Proven WOB-L® technology (Optimum life)• Monolithic head (Fewer parts, eliminates potential leak paths)• Field service capability (Maximum return on investment)• Thermally protected motor (Fail-safe operation)• Designed and tested per Agency standards (Fail-safe operation)• Inlet filter/exhaust muffler (Quiet, clean operation)• RoHS compliant (Green, eco-friendly)

Qualified OEM designers shouldconsult factory for purchase or custom configurations•920-457-4891 or [email protected]•Minimumorderquantitiesmayapply

2668 Series

ThomasDivisionisanISO9001certifiedcompany

Page 2: Configured 2668 Series Datasheet

2668 SERIES The information presented in this material is based on technical data and test results of nominal units. It is believed to be accurate and reliable and is offered as an aid to help in the selection of Thomas Division products. It is the responsibility of the user to determine the suitability of the product for its intended use and the user assumes all risk and liability whatsoever in connection therewith. Thomas Division does not warrant, guarantee or assume any obligation or liability in connection with this information. NOTE: Models pictured are representative of the series and do not represent a specific model number. Consult factory for detailed physical description.

Thomas Division1419 Illinois Ave

Sheboygan, WI 53081 USAPhone: 920-457-4891

Fax: 920-451-4276www.gd-thomas.com

©2011 Gardner Denver Thomas, Inc. All rights reserved. Form No. 850-4007 06/11

Dual Dimensions: in[mm]

Performance Data

Electrical Data

General Data

Product Dimensions

Max flow 3.1 cfm (87.8 l/min)Max. pressure 100 psi (6.9 bar) Max. vacuum 93% local barometer

Headconfiguration Pressure/vacuumparallelflow Pressure/vacuumparallelflow Pressure/vacuumparallelflow Stroke 0.44 in (11.2 mm) 0.44 in (11.2 mm) 0.44 in (11.2 mm) Nominalvoltage/frequency 115V60Hz 230V50/60Hz 100V50/60Hz Maximumopenairflow 3.1cfm(87.8l/min) 2.6/3.1 cfm (73.6/87.8 l/min) 2.6/3.1 cfm (73.6/87.8 l/min)Maximum operating pressure 100 psi (6.9 bar) 100/100 psi (6.9/6.9 bar) 100/40 psi (6.9/2.8 bar) Current at rated pressure 4.5A 1.8/2.1A 4.6/4.3A Power at rated pressure 489W 408/449W 430/432W Speed at rated pressure 1699 rpm 1406/1676 rpm 1400/1689 rpmMaximum pressure restart Consult factory Consult factory Consult factoryMaximum vacuum 93% local barometer 93% local barometer 93% local barometerMaximum vacuum restart Consult factory Consult factory Consult factory

Motortype[Capacitance] P.S.C.[15μF] P.S.C.[15μF] P.S.C.[20μF]Motor in-rush current 16.2A 5.9/5.6A 10.9/10.5AMotor insulation class B B BThermal switch [Open temperature] Yes [293°F (145°C)] Yes [275°F (135°C)] Yes [293°F (145°C)] Line lead wire color, gauge Brown(hot), blue(neutral), 18 AWG Brown(hot), blue(neutral), 18 AWG Brown(hot), blue(neutral), 18AWG Capacitor lead wire color, gauge Black, black, 18 AWG Red, red, 18 AWG Black, black, 18 AWG

Operating ambient air temperature 50° to 104°F (10° to 40°C) 50° to 104°F (10° to 40°C) 50° to 104°F (10° to 40°C)Safetycertification UL,CSA CE,TUV NoneNet weight 16.3 lbs (7.4 kg) 16.3 lbs (7.4 kg) 16.3 lbs (7.4 kg)

Model Number 2668E44XNTLSXX 2668N44XNTLSXX 2668S44XNTLSXX

WOB-L® 2668 Series Base Models

Note: Supplied capacitor mounted remotely.

2668 SERIES

See Performance Data for base model maximum operating pressuresConsultfactoryforcustomconfiguredstrokeoptions

0

0.4

0.8

1.2

1.6

2

2.4

2.8

3.2

-25 -20 -15 -10 -5 0 10 20 30 40 50 60 70 80 90 100

60Hz

50Hz

Vacuum[in.Hg] Pressure [psi]

Flow

[cfm

]

Vacuum[mbar] Pressure [bar]

Flow

[l/m

in]

2668 Series Base Model Flow Curve

847 677 508 399 169 0 2.8 3.4 4.1 4.8 5.5 6.2 6.990.6

79.3

68.0

56.6

45.3

34.0

22.7

11.3

0

2.11.40.7