CONFIGURE

Automatic Configuration

Systems using a Cloud Connect and 50 smart modules or fewer are eligible for automatic configuration using the Tigo SMART app.

All others must be configured online at tigoenergy.com before commissioning.

Online Configuration

To configure a system online, log in to tigoenergy.com with your installer account.

You can also create an installer account here if this is your first installation.

New Installation

Click “New Installation” to begin.

Have your site map or string list with bar codes ready.

Installation Wizard

Complete the five steps of the Installation Wizard

Have your site map or string list with bar codes ready.

Enter site information:•Address•Site owner information•3rd party finance, if applicable

Click “Next” to proceed

Site Information

Enter inverter information:• Make and model• Max power• Number of MPPTs• Number of strings• Number of modules per string• MPPT range

Add more inverters if needed.

Equipment – Inverter

Enter PV module information:• Make and model• Max power• Connector type

Add more than one module type if needed

Equipment – Modules

Enter Management Unit information• Label – assign a name• Barcode – a 12 digit code located on

the bottom of the case• Number of Gateways

Click “Register MMU(s)” to save

Click “Next” to proceed

Equipment – MMU or Cloud Connect

Enter your layout information.• Click the grid to begin placing

the modules as they appear on the roof

• Place modules individually or by string

• Choose portrait or landscape

Layout – Place Modules

Once done with the physical layout it’s time to upload the barcodes.• Use a barcode scanner to save

time• Barcodes can be entered

individually or uploaded in a .csv file

• A labeled template is available on this page for .csv uploads

Layout – Enter Barcodes

The map with barcodes from the installation site should show how the modules are wired in series

This ensures that your module-level view matches the actual site layout

Organizing Your Layout

After entering the barcodes you’ll see the modules have all turned green

Save your work and click “Next” to continue

Layout

Review summary and confirm that everything is correct

You can download a copy of your system map and a table referencing your barcodes

Click “Finish” to save and exit.

Confirmation

This will transmit your configuration file to the MMU or Cloud Connect.