confidential marketing guide - trane fan-p… · this fan-powered marketing guide is divided into...

ConfidentialMarketing Guide

VariTrane™Parallel and SeriesFan-PoweredTerminal UnitsDATE: October 2002 ORDER No.: VAV-SLM005-EN

Catalog Reference:

VAV-PRC005-EN

Introduction 3

Parallel Product Features 4–7

Parallel Feature Evaluation 8–11

Parallel Model Comparison 12

Parallel Quick Competitive Comparison 13–14

Parallel Primary Inlet Airflow Ranges (Cfm) 15

Parallel Valve/Fan Combinations 16

Parallel Size Comparison 17

Parallel Fan Airflow Comparison 18–21

Parallel Pressure Requirements 22–24

Parallel Hot Water Coil 25–29

Parallel Electric Coil 30–32

Parallel Contents

© 2002 American Standard, Inc. All rights reserved

Series Product Features 33–36

Series Feature Evaluation 37–41

Series Model Comparison 42

Series Quick Competitive Comparison 43–44

Series Primary Inlet Airflow Ranges (Cfm) 45

Series Valve/Fan Combinations 46

Series Size Comparison 47

Series Fan Airflow Comparison 48–51

Series Pressure Requirements 52–55

Series Hot Water Coil 56–64

Series Electric Coil 65–69

ECM Quick Competitive Comparison 70

ECM Valve/Fan Combinations 71

ECM Size Comparison 72

ECM Fan Airflow Comparison 73–74

ECM Hot Water Coil 75–78

Series Electric Coil 79–80

References 81

Series Contents

2CONFIDENTIAL DOCUMENT. FOR INTERAL USE ONLY.

SeriesContents

Introduction

This Fan-Powered marketing guide is divided into two sections: Fan-PoweredParallel and Fan-Powered Series. The guide is a performance and featurecomparison of Trane, Titus, Enviro-Tec (ETI), Price, and Nailor.

Along with just comparing the performance the guide also shows advantages anddisadvantages of the Trane product vs. the competition’s and explains key sellingfeatures of the product. This is done in the beginning pages of each section titledProduct Features. This Product Features page shows where Trane is advantaged,equal, and disadvantaged. There are also corresponding page numbers thatindicate where you can find more information regarding the features.

Example:Page # where more supporting

data can be found

Green = Trane is advantaged ..................................................... #

Yellow = Trane is equal .............................................................. #

Red = Trane is disadvantaged .................................................... #

3

ProductFeatures

TitusDTQP, ETQP, and PTQP

� 5 fan sizes available, 200–2650 cfm (range based on .25 in. wg DSP)� 19 valve/fan combinations� 5-point flow cross sensing device� 2 casing sizes� SCR fan speed control� DDC, Analog, or Pneumatic control options�Options include hot water coils or integral electric coils for reheat, attenuators, and

various IAQ linings

VAV-SLM005-EN 4CONFIDENTIAL DOCUMENT. FOR INTERAL USE ONLY.

Trane vs. Titus PageGreen = Trane is advantaged

Yellow = Trane is equal

Red = Trane is disadvantaged

Encapsulated edges .................................................................................................. 8Factory-commissioned controls ...............................................................................11More measuring points on our flow ring ..............................................................8, 13ARI certified units ............................................................................................... 10, 13Air filter ................................................................................................................8, 13Filter frame...........................................................................................................8, 13Fan disconnect .....................................................................................................8, 13Hanger brackets ...................................................................................................8, 13

Number of valve/fan combinations..................................................................... 13, 16Unit access ............................................................................................................. 13Fan cfm ranges ............................................................................................. 14, 18–21SCR fan speed control ............................................................................................ 14

80/20 nickel/chrome wire ......................................................................................... 14Dust tight enclosure for electric Reheat ................................................................... 14kW availability ............................................................................................... 10, 13, 30Analog controls ...................................................................................................... 10Steam coils ............................................................................................................. 13

TraneVPCF, VPWF, and VPEF

� 7 fan sizes available, 210–2500 cfm (range based on .25 in. wg DSP)� 19 valve/fan combinations�Minimum 14 measuring point flow ring�Metal encapsulated insulation edges standard for IAQ� Rugged contractor tough unit construction� Factory-commissioned controls� Factory calibrated�UL and ARI listed� Factory-mounting customer controls availability� DDC, Analog, or Pneumatic control options�Options include hot water coils or integral electric coils for reheat, attenuators, and

various ‘IAQ’ linings

5VAV-SLM005-EN

ParallelFan-Powered

ProductFeatures

Enviro-Tech (ETI)VFR, VFR-WC, and VFR-EH

� 6 fan sizes available, 100–2400 cfm (range based on .25 in. wg DSP)� 19 Valve/Fan Combinations� 12-point Flow Star™ flow sensing device, (available for size 6” and above)�Mechanically fastened insulation�DDC, Analog, or Pneumatic control options�Options include hot water coils or integral electric coils for reheat, attenuators, and

various IAQ linings

Green = Trane is advantaged



Trane vs. ETI PageTransformer ......................................................................................................... 14Factory-commissioned controls ........................................................................... 11Manual secondary cutout standard with electric reheat .................................... 9, 13Flow ring on smaller units (5" inlet) / ETI uses a flow bar ................................... 8, 13Air filter ............................................................................................................ 8, 13Filter frame....................................................................................................... 8, 13Fan disconnect ................................................................................................. 8, 13Hanger brackets ............................................................................................... 8, 13

Dual-wall insulation option ...................................................................................13External actuator ..................................................................................................13Damper position indicator ....................................................................................13Fan cfm range ........................................................................................... 14, 18–21

Line fuses for electric heat standard for ETI .......................................................... 14SCR electric heat control ................................................................................. 11, 14120-volt electric heat option .................................................................................. 14Electric reheat kW/voltage/staging options ................................................ 10, 30–31


� 7 fan sizes available, 210–2500 cfm (range based on .25 in. wg DSP)� 19 valve/fan combinations�Minimum 14 measuring point flow ring�Metal encapsulated insulation edges standard for IAQ� Rugged contractor tough unit construction� Factory-commissioned controls� Factory calibrated�UL and ARI listed� Factory-mounting customer controls availability�DDC, Analog, or Pneumatic control options�Options include hot water coils or integral electric coils for reheat, attenuators, and


6

ParallelFan-Powered

VAV-SLM005-EN CONFIDENTIAL DOCUMENT. FOR INTERAL USE ONLY.

ProductFeatures




Trane vs. Price PageValve/fan combinations ...................................................................................... 13, 16Lower damper leakage ............................................................................................ 13More measuring point on our flow ring ................................................................8, 13Water coil access is standard with hot water reheat ................................................. 13Air filter ................................................................................................................8, 13Filter frame...........................................................................................................8, 13Fan disconnect .....................................................................................................8, 13Hanger brackets ...................................................................................................8, 13

Manual secondary cutout for electric reheat .........................................................9, 13Factory-commissioned DDC controls ...................................................................... 11Electric heat wire type ............................................................................................. 14

Perforated liner ................................................................................................... 11, 13SCR electric heat control .....................................................................................11, 14120-volt electric heat ................................................................................................ 14kW range .................................................................................................10, 13, 30–31Fan cfm range ............................................................................................... 14, 18–21Attenuators ............................................................................................................. 14

PriceFDV, FEV, FPV

� 5 fan sizes available, 220–2900 (range based on .25 in. wg DSP)� 14 valve/fan combinations� Factory calibrated to job requirements� SP-200 multi-point flow sensor with 12 measuring points� DDC, Analog, or Pneumatic control options�Options include hot water coils or integral electric coils for reheat, attenuators, and

various insulation


� 7 fan sizes available, 210–2500 cfm (range based on .25 in. wg DSP)� 19 valve/fan combinations�Minimum 14 measuring point flow ring�Metal encapsulated insulation edges standard for IAQ� Rugged contractor tough unit construction� Factory-commissioned controls� Factory calibrated�UL and ARI listed� Factory-mounting customer controls availability� DDC, Analog, or Pneumatic control options�Options include hot water coils or integral electric coils for reheat, attenuators, and


7VAV-SLM005-EN

ParallelFan-Powered

ProductFeatures

Nailor35P, 35PW, 35PE

� 6 fan sizes available. 150–2185 cfm (range based on .25 in. wg DSP)� 22 valve/fan combinations� Inclined opposed blade damper design� “Diamond Flow” multi-point averaging sensor with 8 measuring points�DDC, Analog, or Pneumatic control options�Options include hot water coils or integral electric coil for reheat, attenuators, and

various IAQ linings




Trane vs. Nailor PageEncapsulated edges .............................................................................................. 8Factory-commissioned controls ........................................................................... 11Lower damper leakage .................................................................................... 11, 13Fan cfm range ........................................................................................... 14, 18, 21Manual secondary cutout for electric reheat ..................................................... 9, 13ARI certified units ........................................................................................... 10, 13Air filter ............................................................................................................ 8, 13Filter frame ....................................................................................................... 8, 13Fan disconnect ................................................................................................. 8, 13Hanger brackets ............................................................................................... 8, 13

Single point power ............................................................................................... 14Transformer standard .......................................................................................... 14

Number of valve/fan combinations ................................................................. 13, 16SCR electric heat control ................................................................................. 11, 14Attenuators .......................................................................................................... 14


� 7 fan sizes available, 210–2500 cfm (range based on .25 in. wg DSP)� 19 valve/fan combinations�Minimum 14 measuring point flow ring�Metal encapsulated insulation edges standard for IAQ� Rugged contractor tough unit construction� Factory-commissioned controls� Factory calibrated�UL and ARI listed� Factory-mounting customer controls availability�DDC, Analog, or Pneumatic control options�Options include hot water coils or integral electric coils for reheat, attenuators, and


8

ParallelFan-Powered


FeatureEvaluation

Hanger Brackets/Air Filter/Filter Frame/Fan DisconnectTrane provides hanger brackets, air filter, filter frame, and a fan disconnect asstandard. When Trane is in control of the specifications, make sure that we are makingour competition provide these options in their bill of materials!

Metal Encapsulated EdgesAll VariTrane units are complete with metal encapsulated insulation edges. Thisencapsulated design arrests cut fibers and prevents erosion of the fibers into theairstream. As a standard, our competition “butters” the edges of the exposedinsulation with an adhesive spray intended to hold the fibers together. After beinghandled, and over time, the adhesive breaks down and allows fibers to escape into theairstream. Edge spray is clearly not equivalent! Specifying VariTrane metalencapsulated edges will force the competition to add additional dollars to their units.Whether or not Trane is basis of design, make sure the consultant understands thesignificance of metal encapsulated edges.

Suggested Spec

INSULATION EDGE TREATMENT—All cut edges of insulation shall completely en-closed by metal to arrest cut fibers and prevent erosion into the airstream.

Number of Measuring Points on our Flow Ring (How low canyou go?)The accuracy of a flow-measuring device is determined by the lowest allowableminimum cfm setting. Below this cfm, the VAV units will change from pressure-independent (PI) to pressure-dependent (PD) control. Because VariTrane units aredesigned to integrate into a DDC control system the UCM, flow ring, and pressuretransducer create a flow measurement “system” which provides unmatched flowperformance in the VAV industry. Accuracy is +/- 5% from maximum to minimumcfm. See pp. 11 for a comparison of Trane vs. the competition.

Given:A consultant is designing a space that requires 800 cfm maximum airflow. Ventilationis determined by minimum occupancy = 8 persons. 15 cfm/person equates to 120minimum cfm.

Using the VariTrane Quick Select (VAV-SLP001-EN), the consultant chooses an8” inlet.

The 8" VariTrane air valve can have a minimum set as low as 110 cfm. Thus, the120 cfm minimum is available. Competitor “N” has a minimum that stops at150 cfm and can be no lower. Let’s look at the system/cost impact:

Find:The efficiency impact by having a higher minimum cfm setting.

Assume:

�Unit operates for 3000 hours per year

�Unit is providing reheat 50% of the time.

� Room setpoint (winter) = 70°F

� Supply Air = 55°F

Solution:When in reheat, the VAV unit operates at its minimum airflow. VAV systems typicallyhave 55°F primary air temperature. Let’s see how this 30 cfm can impact operatingcosts:

Qs = 1.085 x cfm x DT

The additional energy required by competitor “N” is

1.085 x 30 cfm x (70 – 55) = 488 Btuh

This equates to 732,375 Btu per year, per 8” valve, which is an increase of 25% inenergy required to reheat the air up to room temperature.

9VAV-SLM005-EN

ParallelFan-Powered

FeatureEvaluation

Suggested Spec

Multi-point, multi-axis flow ring or cross sensor to be furnished and installed byterminal unit manufacturer. Single-point or flow bar sensors are not acceptable. Flowsensing device shall be capable of maintaining airflow to within +/- 5 percent of ratedunit airflow setpoint when installed with 1.5 duct diameters straight duct, of the samesize as the primary airflow inlet, upstream from the unit.

Water Coil MBH PerformanceOverall we have the highest MBH performance out of our competition. This highperformance is the result of our higher water pressure drop on the coils. Don’t let thecompetition force you into a 2-row coil if our 1-row coil will satisfy the MBHperformance requirement.

Suggested Spec

HOT WATER HEATING COILS—Coils shall be factory-installed and shall consist ofaluminum-plated fins and seamless copper tubes. Fins shall have full fin collars toprovide accurate fin spacing and maximum fin-to-tube contact. Tubes shall be me-chanically expanded into the fin collars. Coils shall be leak tested under water to 450psig pressure. Supply and return water connections shall be on the same side of thecoil.

Water Coil Pressure DropAt first glance, you will notice that the Trane VAV water coils have a higher waterpressure drop then the competition. Typically, water pressure drop of VAV terminalunits is not a concern of engineers since the units are piped in a two-pipeconfiguration and the air-handler coil is in the same line. The air-handler water coilpressure drop is what the pump(s) will be sized for.

Manual Secondary Cutout“Electric heater shall be complete with automatic reset cutout and manual resetcutout. The Manual reset cutout shall be capable of being reset by a switch, or pushbutton. Fusible links are not acceptable.”

Why is this important?A fusible link is a small wire sized to melt when it receives more amperage than it wasdesigned to handle. Once melted, it can cool and complete the circuit again. Thissafety issue is why Trane no longer uses fusible links.

Additionally, finding of a replacement part for a fusible link may be difficult. Therefore,the unit would be down for an extended period.

Control Boxes as Standard for Units with NO Controls

What we do:

Field-Installed Controls:Approximately 50% of VAV controllers in the industry are “plenum rated”. This meansthey DO NOT NEED A CONTROL ENCLOSURE. If a control enclosure is required, thecontrols supplier should provide it. After all, they know the size, shape, etc. of theircontroller.

If transformers, disconnects, and/or fuses are factory-installed, then a controlenclosure will be provided to house these. (A control box is available as adesign special.)

Factory-Installed Competitive Controls:When competitive controls are installed in the factory and the controller to beinstalled is a plenum-rated controller, then no control box will be provided. If thecontroller is not plenum rated then a control box will be provided. (A control box isavailable as a design special.)

10

ParallelFan-Powered


FeatureEvaluation

Analog ControlsAnalog controls are a reduced cost solution for the end-user… or are they? AnalogVAV controllers have a similar cost as DDC VAV controllers. What they lack is theability to:

�Monitor remotely

� Provide diagnostic data

� Provide feedback to building control panel

� DDC systems can recognize something is broken before it is even noticed by theoccupants. By the time occupants notice a problem, a service technician can alreadybe on the way.

� Leverage energy-saving strategies such as static pressure optimization (required byASHRAE 90.1) or Ventilation Reset. (See www.Trane.com/commercial/issues/iaq/ashrae.asp.com for additional details)

AcousticsMake sure you are doing an “apples to apples” comparison. Don’t let the competitionuse a less stringent sound power assumption or show cooling only information if re-heat is to be used.

Sound Power–if specifying a particular spectrum shape for a particularmanufacturer, this is the same as being a proprietary specification. This is not advised.

NC (Noise Criteria)–NC level is determined by taking the sound power generatedusing ARI 880-98, and applying a transfer function. The transfer function assumptionsin ARI 885-98 standard are significantly different than the 90 standard. On average, thesame unit operating at the same conditions will show a 4 NC improvement if theolder, superceded 90 standard is used. Don’t let the competition catch you in this trap.

Said another way, if your customers specified NC 40 in the space prior to the 98standard being written, that is now equivalent to NC 44 with the current standard

ARI Certification–Are the units that are specified ARI certified?Titus has a quantity of 19 valve/fan combinations, however on the ARI website only 14are listed as certified units.

Nailor has a quantity of 22 valve/fan combinations listed in their catalog, however onthe ARI website only 14 of those are listed as certified units.

Trane has a quantity of 19 valve/fan combinations, 19 of which are listed on theARI website.

If sound is going to be critical on specific units, make sure the units that we arecomparing to are listed on the ARI website www.ariprimenet.org .

UL Rating for Electric HeatOur units have been tested, approved, and listed with UL as an entire assembly. MostVAV manufacturing companies have their units ETL listed in accordance with ULstandards.

Electric Reheat kW/Voltage/Staging optionsTo better answer this questions as to why units with electric reheat are not able toreach certain higher kW’s on 2- and 3-stage or have certain number of stages, 3-phaseunits when some are able to reach kW’s on some 1-phase, 1-stage units. There aremany reasons why, but the two major limiting factors are wire size and the unitsdischarge dimensions.

A heating element requires a certain length, a certain diameter, and the correctnumber of elements in order to obtain the correct staging. This determines theohmage (resistance) needed to provide the desired kW. Since resistance and kW areinversely proportional for a given voltage, higher kW heaters end up needing very littleelement material, which means changing either the length or the diameter of the wire.However, there are safety issues, UL and NEC regulations, and manufacturingpractices that limit the diameter from getting too small. Hence, only one alternativeexists and that is to change the length of the wire, which may not be long enough tofill the discharge area of the heater. Filling the discharge area is important to building aheater, because it will minimize stratification and will increase the longevity of theheater by minimizing hot spots.

11VAV-SLM005-EN

ParallelFan-Powered

FeatureEvaluation

Factory-CommissioningFactory-commissioning is more than just factory-installed controls! Trane takes greatpride in being the industry leader in factory-commissioned DDC controls. Thefollowing table differentiates these concepts and indicates where options can beobtained (either the field, or the factory):

Factory-installed Factory-commissioned

Transformer optionally installed X XWires terminated in reliable/ consistent setting X XController mounted X XElectric heat contactors and fan relay wired X XTesting of heater contactors and fan relay XController addressing and associated testing XMinimum & Maximum airflows (occupied/unoccupied) XMinimum & Maximum temperature setpoints(occupied/unoccupied) XMinimum ventilation requirements(used to calculate ventilation fraction) XThumbwheel enable/ disable XHeating offset X

Factory-commissioned controllers provide the highest quality and most reliablecontrollers for your VAV system. Additional testing verifies proper unit operationincluding occupied/unoccupied airflow, temperature setpoints, communication linkfunctionality, and output device functionality. The benefits of factory-commissioningare standard on VariTrane terminal units with Trane DDC controls.

Perforated LinersThe intended use of perforated liners was for units that had a Mylar or Tedlarinsulation. Mylar and Tedlar insulation was found to have long-term durabilityproblems and would erode into the airstream over time. The perforated liner wasdesigned to hold the insulation with the idea to improve acoustical performance overa dual-wall construction.

Today, if a perforated liner is specified, it is generally used to prevent possible tearingof the insulation during installation. However, the perforated liner will still allow air topenetrate the insulation and loft fibers into the air stream. The best solution is to use afoil-face or dual-wall insulation option.

SCR Electric Heat ControlTrane does not offer an option for SCR electric heat control. Our competitors use SCRelectric heat control, which is very costly. We can achieve a modulating kW operationusing our DDC controls. Using pulse-width modulation, our DDC UCM calculateshow far from setpoint the temperature is and what percentage of the electric heat isneeded. The heater is then pulsed for a specific time period to satisfy the zone.

Suggested Spec

PULSE-WIDTH MODULATION (PWM)—At heating setpoint, energize first stage ofheat. The second stage of heating shall be energized based on time and temperaturedeviation from setpoint. Duty cycle these stages on a three-minute window. Stage 1shall modulate from 0–50 percent deviation and be on continuously above 50%. Stage2 shall modulate from 50–100 percent deviation.

Lower Damper Leakage

Our damper leakage rate is 1% @ 3 in. wg and Nailor’s leakage rate is 2% @3 in. wg.

Nailor’s higher rate is the result of an opposed blade damper design, which generallyhas a higher leakage rate.

12

ParallelFan-Powered


VAV Terminal Units TRANE TITUS ETI PRICE NAILOR

Parallel Fan-Powered VPCF xTQP VFR FxV 35PCooling x = D (Digital) x = D (Digital)

E (Electronic) E (Electronic)P (Pneumatic) P (Pneumatic)

Parallel Fan-Powered VPWF xTQP VFR-WC FxV 35PWw/ Hot Water Reheat x = D (Digital) x = D (Digital)


Parallel Fan-Powered VPEF xTQP VFR-EH FxV 35PEw/ Electric Reheat x = D (Digital) x = D (Digital)


Note: For Titus and Price replace "x" for control options letter.

Model Comparison

ModelComparison

13VAV-SLM005-EN

ParallelFan-Powered

QuickCompetitiveComparison

Quick Competitive ComparisonParallel Fan-Powered Comparison

Std. = Standard Opt. = OptionalD/S = Design Special N/A = Not Available

Product OfferingsInsulation Trane Titus ETI Price Nailor

1/2" Matte-Faced Insulation Std. Std. Std. Std. (3/4") Std. (3/4")1" Matte-Faced Insulation Opt. Opt. Opt. Opt. Opt.1/2" Foil-Faced Insulation Opt. Opt. Opt. Opt. Opt.1" Foil-Faced Insulation Opt. Opt. Opt. Opt. Opt.1" Dual-Wall Insulation Opt. Opt. Opt. Opt. Opt.3/8" Fiber-Free Insulation Opt. Opt. (3/4") N/A Opt. (3/4") N/APerforated Liner N/A N/A N/A Opt. Opt.External Insulation N/A N/A N/A N/A N/A

Insulation Edge Sealant

Metal Encapsulated Edges Std. Opt. Std. Std. Opt.Edge Spray N/A Std. N/A N/A Std.

Hanger Brackets Std. Opt. Opt. Opt. Opt.

Air Filter Std. Opt. Opt. Opt. Opt.

Filter Frame Std. Opt. Opt. Opt. Opt.

Fan Disconnect Std. Opt. Opt. Opt. Opt.

Power Fusing Opt. Opt. Opt. Opt. Opt.

Access

Unit Access Std.* Std. Std. Std. Std.*Notes: Trane-Access is available through the plenum inlet on cooling only and electric re-heat units. With water coils,access will be provided as standard.

Outlet Connection

Flange Std. Std. Std. Std. Std.Slip and Drive Opt. Opt. Opt.* Opt. Opt.*Notes: ETI only has S&D connection on HW reheat as standard.

External Actuator Std. Std. Std. Std. Std.

Damper Position Indicator Std. Std. Std. N/A N/A

Damper/Fan Combinations

Quantity of Valve/Fan Combinations 19 19 19 14 22# of the units listed by ARI 19 14 19 14 14

Damper Leakage @ 3 in. wg 1% 1% < 1% 2% 2%

Air Measurement

Flow Sensing Device Flow Ring Flow Cross Flow Star* Flow X Flow DiamondAccuracy +/-5% +/-5% +/-5% +/-5% +/-5%Min. Number Measuring Points 16 5 12 12 8*Notes: ETI has a single-point (flow bar) measuring device for size 5" inlet.

Reheat Offering

Series / Cooling Only Opt. Opt. Opt. Opt. Opt.Series / Hot Water Reheat Opt. Opt. Opt. Opt. Opt.Series / Electric Reheat Opt. Opt. Opt. Opt. Opt.Steam Coils N/A Opt. Opt. N/A N/A

Hot Water Coils

1-Row Opt. Opt. Opt. Opt. Opt.2-Row Opt. Opt. Opt. Opt. Opt.3-Row N/A N/A Opt. N/A Opt.4-Row N/A N/A Opt. N/A N/A

Electric Heat Options

kW Range .5–20.0 kW .5–26.0 kW .5–34.0 kW .5–42.0 kW .5–28.0 kWUL Listed Assembly Std. N/A N/A N/A N/AETL Listed Assembly N/A Std. Std. Std. Std.Automatic Thermal Primary Cutout Std. Std. Std. Std. Std.Manual Seconday Reset Std. Opt. Opt. Std. Opt.Door Interlock Disconnect Opt. Opt. Opt. Opt. Opt.

14

ParallelFan-Powered


Quick Competitive Comparison (con't.)Parallel Fan-Powered Comparison


Product OfferingsElectric Heat Options (con't.) Trane Titus ETI Price Nailor

Line Fuse Opt. Opt. Std. Opt. Opt.Airflow Switch Opt. Std. Opt. Opt. Std.Control Transformer Std. Std. Opt. Opt. Std.Fan Relay Std. Std. Std. Std. Std.Magnetic Contactors Std. Std. Std. Std. Std.Mercury Contactors Opt. Opt. Opt. Opt. Opt.P.E. Magnetic Contactors Opt. Opt. Opt. Opt. Opt.P.E. Mercury Contactors Opt. Opt. Opt. Opt. Opt.SCR Control N/A N/A Opt. N/A N/AHinged Access Door Std. Std. Std. Std. Std.NEMA 1 Type Enclosure Std. Std. Std. Std. Std.Dust-Tight Enclosure D/S Opt. Opt. N/A Opt.Class “A” 80/20 Nickel Chrome Elements N/A Std. Std. Opt. Opt.Class “C” 60/16/24 Ni/Ch/Fe Elements Std. N/A N/A Std. Std.Single-point electrical connection Std. Std. Std. Opt. Std.115/120-volt 1-phase heater N/A N/A Opt. Opt. N/A208/240-volt 1-phase heater Opt. Opt. Opt. Opt. Opt.277-volt 1-phase heater Opt. Opt. Opt. Opt. Opt.347-volt 1-phase heater Opt. N/A Opt. Opt. N/A480-volt 1-phase heater Opt. N/A Opt. N/A N/A208-volt 3-phase heater Opt. Opt. Opt. Opt. Opt.240-volt 3-phase heater N/A N/A Opt. N/A N/A480-volt 3-phase heater Opt. Opt. Opt. Opt. Opt.575-volt 3-phase heater Opt. N/A Opt. N/A N/A600-volt 3-phase heater N/A N/A Opt. Opt. N/A

Motor Type

PSC Std. Std. Std. Std. Std.ECM N/A N/A N/A Opt. N/A

PSC Motor Sizes

115 volt Opt. Opt. Opt. Opt. Opt.277 volt Opt. Opt. Opt. Opt. Opt.208 volt Opt. Opt. Opt. N/A Opt.347 volt Opt. N/A Opt. N/A N/A

Horse Power

1/13 N/A N/A Opt. N/A N/A1/10 N/A N/A N/A Opt. N/A1/8 Opt. N/A N/A N/A N/A1/6 N/A Opt. Opt. N/A Opt.1/4 N/A Opt. Opt. Opt. Opt.1/3 Opt. Opt. N/A Opt. Opt.1/2 Opt. N/A Opt. Opt. Opt.3/4 N/A Opt. Opt. Opt. Opt.1 Opt. N/A Opt. N/A N/APSC Cfm Range @ .25 DSP 210–2500 cfm 200–2650 cfm 215–2400 cfm 220–2900 cfm 150–2185 cfm

Motor Speeds

Variable Speed (SCR) Std. Std. N/A Std. Std.Multi Speed N/A N/A Std. N/A N/A

Controls

Direct Digital Controls Opt. Opt. Opt. Opt. Opt.Analog Controls Opt. Opt. Opt. Opt. Opt.Pneumatic Controls Opt. Opt. Opt. Opt. Opt.

Other Options

Attenuators D/S N/A N/A Opt. Opt.


15VAV-SLM005-EN

ParallelFan-Powered

PrimaryInlet AirflowRanges (Cfm)

TraneInlet Total Cfm DDC Analog PneumaticSize Range Min–Max Min–Max Min–Max

6 0–500 60–500 120–500 80–5008 0–900 110–900 210–900 140–90010 0–1400 165–1400 328–1400 220–140012 0–2000 235–2000 470–2000 320–200014 0–3000 320–3000 640–3000 425–300016 0–4000 420–4000 840–4000 560–4000

TitusInlet Total Cfm DDC Analog PneumaticSize Range Min–Max Min–Max Min–Max

6 0–500 80–500 80–500 150–5008 0–900 145–900 145–900 265–90010 0–1400 230–1400 230–1400 415–140012 0–2000 325–2000 325–2000 600–200014 0–3000 450–3000 450–3000 810–300016 0–4000 580–4000 580–4000 1100–4000

ETIInlet Total Cfm DDC Analog PneumaticSize Range Min–Max Min–Max Min–Max

4 0–250 30–250 35–250 45–2505 0–350 50–350 50–350 65–3506 0–550 55–530 60–550 75–4908 0–1000 105–1000 115–1000 145–96010 0–1600 165–1355 185–1600 235–154512 0–2300 240–2300 285–2300 340–225014 0–3100 335–3100 390–3100 475–310016 0–4100 440–4100 520–4100 625–4100

PriceInlet Total Cfm DDC Analog PneumaticSize Range Min–Max Min–Max Min–Max

6 0–450 66–450 66–450 66–4508 0–800 132–800 132–800 132–80010 0–1350 221–1350 221–1350 221–135012 0–2100 304–2100 304–2100 304–210014 0–3000 439–3000 439–3000 439–300016 0–4000 568–4000 568–4000 568–4000

NailorInlet Total Cfm DDC Analog PneumaticSize Range Min–Max Min–Max Min–Max

6 0–500 70–500 70–500 85–5008 0–1000 150–1000 150–1000 180–100010 0–1435 205–1435 205–1435 250–143512 0–2185 260–2185 260–2185 320–218514 0–2745 380–2745 380–2745 470–274516 0–3730 480–3730 480–3730 590–3730

16

ParallelFan-Powered


Valve/FanCombinations

Trane VP*FInlet Sizes

Fan Size 4" 5" 6" 8" 10" 12" 14" 16" Total

01 (210–500 cfm) X X 1902 (300–615 cfm) X X X03 (500–925 cfm) X X X04 (575–1150 cfm) X X X05 (1000–1675 cfm) X X X06 (1000–2350 cfm) X X X07 (1300–2500 cfm) X X

Titus TQPInlet Sizes

Fan Size 4" 5" 6" 8" 10" 12" 14" 16" Total

2 (200–600 cfm) X X X X 193 (410–1270 cfm) X X X X4 (840–1500 cfm) X X X X5 (700–1700 cfm) X X X X6 (1340–2650 cfm) X X X

ETI VFRInlet Sizes

Fan Size 4" 5" 6" 8" 10" 12" 14" 16" Total

4 (215–420 cfm) X X X X 196 (480–595 cfm) X X X11 (690–1150 cfm) X X X X18 (1450–1890 cfm) X X X21 (1600–2075 cfm) X X X24 (1800–2400 cfm) X X

Price F*VInlet Sizes

Fan Size 4" 5" 6" 8" 10" 12" 14" 16" Total

20 (220–670 cfm) X X X 1430 (500–1250 cfm) X X X40 (780–1910 cfm) X X X50 (1490–2450 cfm) X X X60 (2000–2900 cfm) X X

Nailor 35PInlet Sizes

Fan Size 4" 5" 6" 8" 10" 12" 14" 16" Total

2 (150–540 cfm) X X X 223 (150–775 cfm) X X X4 (650–1080 cfm) X X X X5 (590–1400 cfm) X X X X6 (860–1670 cfm) X X X X7 (1050–2185 cfm) X X X X

17VAV-SLM005-EN

ParallelFan-Powered

PerformanceData—SizeComparison

Trane VPxF—Size ComparisonFan Cooling Electric H

2O Width Height Cooling Cooling Electric H

2O

Size Length Heat Length Footprint Volume Heat LengthLength (sq ft) (cu ft) Length Add Add

01 30 36 36.75 40 15.5 8.33 10.76 6.00 6.7502 30 36 36.75 40 15.5 8.33 10.76 6.00 6.7503 30 36 36.75 40 15.5 8.33 10.76 6.00 6.7504 30 36 36.75 40 21.5 8.33 14.93 6.00 6.7505 30 36 36.75 40 21.5 8.33 14.93 6.00 6.7506 40 46 46.75 40 21.5 11.11 19.91 6.00 6.7507 40 46 46.75 40 21.5 11.11 19.91 6.00 6.75

Titus TQP—Size ComparisonFan Cooling Electric H


2O


2 40.875 50.625 49.875 36.25 17.125 10.29 14.68 9.75 9.003 40.875 50.625 49.875 36.25 17.125 10.29 14.68 9.75 9.004 40.875 50.625 49.875 36.25 17.125 10.29 14.68 9.75 9.005 46.875 56.625 55.875 48.25 20.125 15.71 26.34 9.75 9.006 46.875 56.625 55.875 48.25 20.125 15.71 26.34 9.75 9.00

ETI VFR—Size ComparisonFan Cooling Electric H


2O


4 23.5 31.5 28.5 29 14 4.73 5.52 8.00 5.006 23.5 31.5 28.5 29 14 4.73 5.52 8.00 5.0011 29.5 37.5 34.5 37 17 7.58 10.74 8.00 5.0018 29.5 37.5 34.5 37 17 7.58 10.74 8.00 5.0021 29.5 37.5 34.5 45 19 9.22 14.60 8.00 5.0024 29.5 37.5 34.5 49 19 10.04 15.89 8.00 5.00

Price FDV—Size ComparisonFan Cooling Electric H


2O


20 22.75 28.75 27.75 28.75 14 4.54 5.30 6.00 5.0030 24 33 29 33.5 17.5 5.58 8.14 9.00 5.0040 29.5 38.5 34.5 38.5 17.5 7.89 11.50 9.00 5.0050 35 44 40 42.5 20 10.33 17.22 9.00 5.0060 36.25 45.25 41.25 42.5 20 10.70 17.83 9.00 5.00

Nailor 35P—Size ComparisonFan Cooling Electric H


2O


2 36 48.5 36 34 14 8.50 9.92 12.50 0.003 46 61.25 46 40 17 12.78 18.10 15.25 0.004 46 61.25 46 40 17 12.78 18.10 15.25 0.005 46 61.25 46 40 17 12.78 18.10 15.25 0.006 48 63.25 48 50 19 16.67 26.39 15.25 0.007 48 63.25 48 50 19 16.67 26.39 15.25 0.00

18

ParallelFan-Powered


PerformanceData—Fan AirflowComparison

Nailor Fan Performance @ .25" DSPCfm Size 1 Size 2 Size 3 Size 4 Size 5 Size 6 Size 7

Cooling Max. — 575 830 1150 1510 1670 2185Only Min. — 150 150 640 590 870 1050HW Max. — 540 775 1090 1400 1670 1600

1-row Min. — 90 150 640 590 870 1050HW Max. — 540 775 1090 1400 1670 1600

2-row Min. — 90 150 640 590 870 1050

% Reduction from Cooling Only Max.Size 1 Size 2 Size 3 Size 4 Size 5 Size 6 Size 7

1-row 0.0% 6.1% 6.6% 5.2% 7.3% 0.0% 26.8%2-row 0.0% 6.1% 6.6% 5.2% 7.3% 0.0% 26.8%

Price Fan Performance @ .25" DSPCfm Size 10 Size 20 Size 30 Size 40 Size 50 Size 60

Cooling Max. — 675 1250 1900 2450 2900Only Min. — 225 500 790 1490 2000HW Max. — 580 1100 1750 2150 2750

1-row Min. — 225 500 790 1490 2000HW Max. — 540 975 1500 2000 2525

2-row Min. — 225 500 790 1490 2000

% Reduction from Cooling Only Max.Size 10 Size 20 Size 30 Size 40 Size 50 Size 60

1-row 0.0% 14.1% 12.0% 7.9% 12.2% 5.2%2-row 0.0% 20.0% 22.0% 21.1% 18.4% 12.9%

ETI Fan Performance @ .25" DSPCfm Size 04 Size 06 Size 11 Size 18 Size 21 Size 24 Size 30 Size 40 Size 44

Cooling Max. 410 595 1120 1900 2010 2390 — — —Only Min. 215 200 100 800 1000 1200 — — —HW Max. 400 580 1090 1850 1950 2300 — — —

1-row Min. 215 200 100 800 1000 1200 — — —HW Max. 390 570 1080 1800 1850 2150 — — —

2-row Min. 215 200 100 800 1000 1200 — — —

% Reduction from Cooling Only Max.Size 04 Size 06 Size 11 Size 18 Size 21 Size 24 Size 30 Size 40 Size 44

1-row 2.4% 2.5% 2.7% 2.6% 3.0% 3.8% 0.0% 0.0% 0.0%2-row 4.9% 4.2% 3.6% 5.3% 8.0% 10.0% 0.0% 0.0% 0.0%

Titus Fan Performance @ .25" DSPCfm Size 1 Size 2 Size 3 Size 4 Size 5 Size 6 Size 7

Cooling Max. — 600 1275 1480 1700 2630 —Only Min. — 200 410 830 650 1330 —HW Max. — 560 1150 1275 1600 2350 —

1-row Min. — 200 410 830 650 1330 —HW Max. — 550 1050 1150 1500 2175 —

2-row Min. — 200 410 830 650 1330 —


1-row 0.0% 6.7% 9.8% 13.9% 5.9% 10.6% 0.0%2-row 0.0% 8.3% 17.6% 22.3% 11.8% 17.3% 0.0%

Trane Fan Performance @ .25" DSPCfm Size 1 Size 2 Size 3 Size 4 Size 5 Size 6 Size 7

Cooling Max. 500 615 925 1150 1677 2350 2500Only Min. 210 300 500 575 675 1000 1300HW Max. 475 580 905 1110 1534 2100 2150

1-row Min. 210 300 500 575 675 1000 1300HW Max. 475 565 890 1080 1488 1900 1900

2-row Min. 210 300 500 575 675 1000 1300


1-row 5.0% 5.7% 2.2% 3.5% 8.5% 10.6% 14.0%2-row 5.0% 8.1% 3.8% 6.1% 11.3% 19.1% 24.0%

19VAV-SLM005-EN

ParallelFan-Powered


0 500 1000 1500 2000 2500 3000Cfm Range

2

4

6

20

40

60

06

18

24

3

5

01

03

05

07

Fan

Siz

e

Trane

Titus

ETI

Price

Nailo r

Parallel Fan Airflow Comparison

11

21

2

4

6

06

04

02

5

7

30

50

04

3

20

ParallelFan-Powered



0 500 1000 1500 2000 2500 3000Cfm Range

2

4

6

20

40

60

06

18

24

3

5

01

03

05

07

Fan

Siz

e

Parallel Fan Airflow Comparison w/ 1-Row HW

Trane

Titus

ETI

Price

Nailor

04

02

06

2

4

6

21

11

04

30

50

3

5

7

21VAV-SLM005-EN

ParallelFan-Powered


0 500 1000 1500 2000 2500 3000

Cfm Range

2

4

6

20

40

60

06

18

24

3

5

01

03

05

07

Fan

Size

Fan Airflow Comparison w/ 2-row HW

Nailor

Price

ETI

Titus

Trane02

06

4

04

2

6

11

7

5

30

3

50

21

04

22

ParallelFan-Powered


PerformanceData—PressureRequirements

Inlet/Fan Airflow CoolingSize Cfm Only

Inlet/Fan Airflow TQP TQP ElectricSize Cfm Cooling 1-row coil 2-row coil Heat

06/02 200 0.08 0.01 0.01 —300 0.18 0.01 0.02 —400 0.32 0.02 0.04 —500 0.5 0.03 0.05 —

08/02 200 0.019 0.01 0.01 —300 0.043 0.01 0.02 —400 0.08 0.02 0.04 —500 0.13 0.03 0.05 —

10/02 200 0.01 0.01 0.01 —300 0.019 0.01 0.02 —400 0.035 0.02 0.04 —500 0.055 0.03 0.05 —

06/03 300 0.18 0.01 0.02 —375 0.26 0.01 0.03 —450 0.4 0.02 0.04 —500 0.5 0.05 0.05 —

08/03 300 0.043 0.01 0.02 —375 0.065 0.01 0.03 —450 0.1 0.02 0.04 —500 0.13 0.03 0.05 —

10/03 300 0.019 0.01 0.02 —375 0.03 0.01 0.03 —450 0.045 0.02 0.04 —500 0.055 0.03 0.05 —

08/04 500 0.13 0.03 0.05 —625 0.19 0.04 0.08 —750 0.28 0.05 0.1 —900 0.39 0.08 0.15 —

10/04 750 0.125 0.05 0.1 —900 0.175 0.08 0.15 —1000 0.21 0.1 0.18 —1150 0.25 0.12 0.23 —

12/04 750 0.065 0.05 0.1 —900 0.1 0.08 0.15 —1000 0.12 0.1 0.18 —1150 0.13 0.12 0.23 —

10/05 1000 0.19 0.03 0.07 —1150 0.24 0.04 0.08 —1300 0.32 0.06 0.1 —1400 0.36 0.07 0.12 —

12/05 1100 0.13 0.04 0.08 —1300 0.18 0.06 0.1 —1400 0.2 0.07 0.12 —1700 0.29 0.09 — —

14/05 1100 0.065 0.04 0.08 —1300 0.09 0.06 0.1 —1400 0.095 0.07 0.12 —1700 0.15 0.09 — —

16/05 1100 0.044 0.04 0.08 —1300 0.63 0.06 0.1 —1400 0.069 0.07 0.12 —1700 0.11 0.09 — —

12/06 1500 0.2 0.07 0.13 —1600 0.225 0.08 0.15 —1800 0.32 0.1 0.18 —2000 0.4 0.12 0.22 —

14/06 1800 0.175 0.1 0.18 —2100 1.8 0.12 0.23 —2400 0.31 0.16 — —2600 0.37 0.17 — —

16/06 1800 0.13 0.1 0.18 —2100 0.17 0.12 0.23 —2400 0.225 0.16 — —2600 0.26 0.1 — —

Titus Air Pressure Drop—in. wg (I-P)

Note: HW Coil Only pressure drops are just the heating coil.


06–01 210 0.06300 0.12400 0.22500 0.35

08–01 210 0.01300 0.02400 0.04500 0.06

06–02 300 0.12375 0.19450 0.28500 0.35

08–02 300 0.02400 0.04500 0.06600 0.09

10–02 300 0.01400 0.01500 0.01615 0.01

08–03 500 0.08625 0.12750 0.17900 0.24

10–03 500 0.01725 0.02850 0.03925 0.04

12–03 500 0.01725 0.01850 0.01925 0.01

08–04 575 0.10700 0.15800 0.19900 0.24

10–04 575 0.01700 0.02900 0.041150 0.06

12–04 575 0.01700 0.01900 0.011150 0.01

10–05 1000 0.051150 0.061250 0.071400 0.09

12–05 1000 0.011200 0.011400 0.011675 0.01

14–05 1000 0.011200 0.011400 0.011675 0.01

12–06 1000 0.011300 0.011600 0.012000 0.01

14–06 1500 0.011800 0.012100 0.012300 0.01

16–06 1500 0.011800 0.012100 0.012300 0.01

14–07 1500 0.011900 0.012200 0.012500 0.01

16–07 1500 0.012000 0.012500 0.013000 0.01

Trane Air Pressure Drop—in. wg (I-P)

Fan Airflow 1-Row HW 2-Row HW ElectricSize Cfm Coil Only Coil Only Coil Only

01–02 210 0.01 .02 .01300 0.02 .03 .01400 0.02 .04 .01500 0.03 .06 .01600 0.04 .08 .01

03–07 500 0.02 .03 .01900 0.04 .09 .01

1300 0.08 .15 .011700 0.13 .24 .022100 0.19 .34 .042500 0.26 .45 .07

Air Pressure Drop – in. wg (I-P)

23VAV-SLM005-EN

ParallelFan-Powered


Inlet/Fan Airflow VFR VFR-WC VFR-EHSize Cfm Cooling 1-row coil 2-row coil Elec. Heat

0404 100 0.01 0.01 0.01 0.01150 0.01 0.01 0.01 0.01200 0.02 0.01 0.01 0.02250 0.02 0.01 0.01 0.03

0504 100 0.01 0.01 0.01 0.01200 0.01 0.01 0.01 0.02300 0.02 0.01 0.02 0.05350 0.02 0.015 0.025 0.0

0604/ 250 0.04 0.01 0.015 0.030606 300 0.06 0.01 0.02 0.05

350 0.08 0.015 0.025 0.07450 0.14 0.02 0.04 0.11550 0.21 0.025 0.06 0.17

0804/ 400 0.03 0.02 0.03 0.040806/ 500 0.04 0.02 0.05 0.060811 600 0.06 0.03 0.07 0.09

800 0.1 0.06 0.11 0.161000 0.15 — — 0.25

1006/ 800 0.01 0.03 0.05 0.031011/ 1000 0.01 0.04 0.08 0.041018 1200 0.02 0.05 0.11 0.06

1400 0.02 0.07 0.14 0.081600 0.03 0.09 0.18 0.11

1211/ 1100 0.02 0.045 0.09 0.031218/ 1400 0.04 0.07 0.14 0.051221/ 1700 0.06 0.1 0.205 0.07

2000 0.08 — — 0.112300 0.1 — — 0.14

1411/ 1500 0.04 0.06 0.125 0.021418/ 1900 0.06 0.095 0.19 0.031421/ 2300 0.08 — — 0.041524 2700 0.12 — — 0.05

3100 0.15 — — 0.071621/ 2100 0.02 0.1 0.23 0.021624 2600 0.03 — — 0.03

3100 0.04 — — 0.053600 0.05 — — 0.064100 0.07 — — 0.08

ETI Air Pressure Drop—in. wg (I-P) Price Air Pressure Drop—in. wg (I-P)

Inlet/Fan Airflow FxV FxV FxVSize Cfm Cooling 1-row coil 2-row coil Elec. Heat

2006 250 0.07 0.04 0.08 —350 0.13 0.07 0.14 —450 0.22 0.11 0.21 —

2008 400 0.01 0.09 0.17 —600 0.03 0.175 0.345 —800 0.06 — — —

2010 750 0.01 — — —1050 0.02 — — —1350 0.05 — — —

3008 400 0.03 — — —600 0.05 0.09 0.18 —800 0.07 0.15 0.29 —

3010 750 0.01 0.135 0.26 —1050 0.01 — — —1350 0.01 — — —

3012 900 0.01 0.18 0.35 —1300 0.01 — — —1700 0.01 — — —2100 0.01 — — —

4010 750 0.01 — — —1050 0.01 0.135 0.27 —1350 0.01 0.21 0.42 —

4012 900 0.01 0.1 0.21 —1300 0.01 0.19 0.39 —1700 0.01 — — —2100 0.01 — — —

4014 1500 0.01 0.25 0.5 —2000 0.01 — — —2500 0.01 — — —3000 0.01 — — —

5012 900 0.01 — — —1300 0.01 — — —1700 0.01 0.16 0.32 —2100 0.01 0.23 0.46 —

5014 1500 0.01 0.13 0.26 —2000 0.01 0.21 0.43 —2500 0.01 — — —3000 0.01 — — —

5016 2500 0.01 — — —3000 0.01 — — —3500 0.01 — — —4000 0.01 — — —

6014 1500 0.01 — — —2000 0.01 0.16 0.37 —2500 0.01 0.23 0.46 —3000 0.01 — — —

6016 2500 0.01 0.23 0.46 —3000 0.01 — — —3500 0.01 — — —4000 0.01 — — —

24

ParallelFan-Powered



Inlet/Fan Airflow 35P 35P 35PSize Cfm Cooling 1-row coil 2-row coil Elec. Heat

06/02 200 0.05 0.01 0.02 —300 0.05 0.019 0.04 —400 0.05 0.03 0.065 —500 0.12 0.045 0.095 —

08/02 175 0.05 0.01 0.016 —350 0.05 0.025 0.052 —525 0.05 0.048 0.11 —875 0.05 — — —

10/02 275 0.05 0.016 0.035 —550 0.05 — — —825 0.05 — — —1100 0.05 — — —

10/03 275 0.05 0.01 0.027 —550 0.05 0.035 0.085 —825 0.05 — — —1100 0.05 — — —

12/03 400 0.05 0.02 0.05 —800 0.05 — — —

1200 0.05 — — —1600 0.05 — — —

14/03 525 0.05 0.033 0.08 —1050 0.05 — — —1575 0.05 — — —2100 0.05 — — —

16/03 700 0.05 0.52 0.14 —1400 0.05 — — —2100 0.08 — — —2800 0.14 — — —

10/04 275 0.05 0.01 0.027 —550 0.05 0.035 0.12 —825 0.05 0.08 0.18 —1100 0.05 — — —

12/04 400 0.05 0.02 0.05 —800 0.05 0.07 0.18 —

1200 0.05 — — —1600 0.05 — — —

14/04 525 0.05 0.033 0.11 —1050 0.05 0.15 0.25 —1575 0.05 — — —2100 0.05 — — —

Nailor Air Pressure Drop—in. wg (I-P)

Inlet/Fan Airflow 35P 35P 35PSize Cfm Cooling 1-row coil 2-row coil Elec. Heat16/04 700 0.05 0.52 0.14 —

1400 0.05 — — —2100 0.08 — — —2800 0.14 — — —

10/05 275 0.05 0.01 0.014 —550 0.05 0.018 0.045 —825 0.05 0.036 0.08 —1100 0.05 0.055 0.14 —

12/05 400 0.05 0.012 0.026 —800 0.05 0.035 0.08 —

1200 0.05 0.057 0.14 —1600 0.05 — — —

14/05 525 0.05 0.017 0.043 —1050 0.05 0.054 0.11 —1575 0.05 — — —2100 0.05 — — —

16/05 700 0.05 0.29 0.065 —1400 0.05 0.09 0.2 —2100 0.08 — — —2800 0.14 — — —

14/06 525 0.05 0.01 0.023 —1050 0.05 0.034 0.075 —1575 0.05 0.058 0.15 —2100 0.05 — — —

16/06 700 0.05 0.017 0.038 —1400 0.05 0.052 0.13 —2100 0.05 — — —2800 0.06 — — —

14/07 525 0.05 0.01 0.023 —1050 0.05 0.034 0.075 —1575 0.05 0.058 0.15 —2100 0.05 — — —

16/07 700 0.05 0.017 0.038 —1400 0.05 0.052 0.13 —2100 0.05 — — —2800 0.06 — — —

25VAV-SLM005-EN

ParallelFan-Powered

PerformanceData—Hot WaterCoil (I-P)

Trane—Fan Size 01,02 (I-P)Water

Pressure Airflow (Cfm)Rows Gpm Drop (ft) 215 250 300 350 400 450 500 550 590

0.5 0.22 10.78 11.44 12.24 12.87 13.39 13.82 14.19 14.50 14.731-Row 1.0 0.77 13.17 14.14 15.31 16.32 17.18 17.94 18.67 19.32 19.79

Capacity 2.0 2.67 14.66 15.89 17.43 18.77 19.95 21.00 21.96 22.83 23.47MBH 3.0 5.57 15.24 16.58 18.26 19.74 21.06 22.25 23.34 24.33 25.07

4.0 9.43 15.54 16.94 18.71 20.28 21.67 22.94 24.09 25.16 25.955.0 14.22 15.73 17.17 19.00 20.61 22.06 23.37 24.57 25.68 26.511.0 1.33 16.03 18.44 21.36 23.77 25.79 27.48 28.92 — —

2-Row 2.0 4.47 17.34 20.24 23.94 27.17 30.02 32.53 34.77 36.78 38.23Capacity 3.0 9.15 17.80 20.87 24.84 28.39 31.56 34.42 37.00 39.34 41.07

MBH 4.0 15.29 18.03 21.19 25.31 29.01 32.35 35.39 38.16 40.69 42.575.0 22.79 18.17 21.39 25.59 29.39 32.84 35.99 38.87 41.52 43.50

Temperature Correction Factors for Water Pressure Drop (Ft)

Average Water Temperature 200 190 180 170 160 150 140 130 120 110Correction Factor 0.970 0.985 1.000 1.020 1.030 1.050 1.080 1.100 1.130 1.150

)

Temperature Correction Factors for Coil Capacity (MBH)

Entering Water Minus Entering Air 40 50 60 70 80 90 100 110 120 130Correction Factor 0.355 0.446 0.537 0.629 0.722 0.814 0.907 1.000 1.093 1.187

Coils - Water Weights

Internal Internal OperatingUnit Fan Coil Volume Volume WeightType Size Type (in.3) (gal.) (lbs)VPWF 01,02 1-Row 32.52 0.141 12.3VPWF 01,02 2-Row 57.90 0.251 16.8VPWF 03-07 1-Row 51.21 0.222 14.5VPWF 03-07 2-Row 89.27 0.386 20.1

LAT = EAT + MBH x 921.7CFM WTD = EWT - LWT = 2 x MBH

GPM(( )

Trane—Fan Size 03-07 (I-P)Water

Pressure Airflow (Cfm)Rows Gpm Drop (ft) 500 700 900 1100 1300 1500 1700 1900 2100 2300

1.0 0.37 21.41 24.01 25.79 27.10 28.12 28.94 29.62 — — —2.0 1.25 25.94 29.73 32.60 35.00 36.95 38.57 39.95 41.16 42.21 43.15

1-Row 3.0 2.59 27.88 32.36 35.83 38.62 40.96 43.00 44.81 46.39 47.79 49.05Capacity 4.0 4.35 28.95 33.84 37.68 40.81 43.44 45.70 47.68 49.47 51.10 52.57

MBH 5.0 6.52 29.64 34.80 38.89 42.24 45.07 47.52 49.68 51.60 53.34 54.926.0 9.07 30.12 35.48 39.74 43.25 46.23 48.82 51.11 53.15 55.00 56.687.0 12.03 30.47 35.97 40.37 44.00 47.10 49.80 52.18 54.32 56.25 58.012.0 2.25 36.46 44.95 50.87 55.20 58.55 — — — — —

2-Row 3.0 4.59 38.88 49.06 56.61 62.40 67.02 70.87 74.17 77.08 79.69 —Capacity 4.0 7.63 40.13 51.27 59.78 66.46 71.92 76.54 80.55 84.13 87.37 —

MBH 5.0 11.33 40.90 52.64 61.77 69.06 75.09 80.24 84.77 88.83 92.54 —6.0 15.67 41.42 53.57 63.14 70.87 77.31 82.86 87.76 92.18 96.24 —7.0 20.66 41.80 54.25 64.14 72.19 78.95 84.79 89.98 94.69 99.02 —

Notes:1. Fouling Factor = 0.000252. The off-coil temperature of the hot water coil on parallel fan-powered units must not exceed 140°F.3. The following equations may be used in calculating Leaving Air Temperature (LAT) and Water Temperature Difference (WTD)4. Capacity based on 70°F entering air temperature and 180°F entering water temperature. Refer to correction factors for different

entering conditions.

26

ParallelFan-Powered



Titus—Fan Size 2 (I-P)Airflow (Cfm)

Rows Gpm WPD (ft) 180 230 280 330 380 430 480 530 580

1-row 1 0.3 12.3 13.7 14.8 15.7 16.5 17.1 17.7 18.3 18.7Capacity 2 0.9 13.4 15.1 16.5 17.7 18.7 19.6 20.4 21.1 21.7

MBH 4 3.2 14.1 16 17.5 18.9 20.1 21.1 22.1 22.9 23.76 6.5 14.3 16.3 17.9 19.4 20.6 21.7 22.7 23.7 24.4

2-row 1 0.6 16.8 19.6 22.0 24.1 25.8 27.4 28.8 30.0 31.1Capacity 2 2.0 18.1 21.6 24.7 27.4 29.9 32.2 34.2 36.1 37.9

MBH 4 6.8 18.8 22.7 26.2 29.4 32.3 35.0 37.6 40.0 42.26 13.9 19.1 23.1 26.7 30.1 33.2 36.1 38.8 41.4 43.9


Rows Gpm WPD (ft) 400 510 620 730 840 950 1060 1170 1280

1-row 1 0.3 16.8 18.1 19.2 20.5 21.6 22.5 23.4 24.1 24.8Capacity 2 0.9 19.1 20.8 22.4 24.2 25.8 27.2 28.5 29.7 30.7

MBH 4 3.2 20.5 22.6 24.5 26.7 28.7 30.5 32.1 33.6 35.06 6.5 21.1 23.3 25.3 27.7 29.8 31.8 33.6 35.2 36.8

2-row 1 0.6 26.5 29.5 32.0 33.9 35.5 36.9 38.1 — —Capacity 2 2.0 30.8 35.4 39.2 42.5 45.4 47.9 50.1 — —

MBH 4 6.8 33.4 39.0 43.9 48.3 52.1 55.6 58.8 — —6 13.9 34.4 40.4 45.7 50.5 54.8 58.7 62.4 — —


Rows Gpm WPD (ft) 800 870 940 1010 1080 1150 1220 1290 1360

1-row 1 0.3 21.2 21.8 22.5 23.0 23.5 24.0 24.5 24.9 25.3Capacity 2 0.9 25.2 26.2 27.1 27.9 28.7 29.5 30.2 30.8 31.5

MBH 4 3.2 28.0 29.2 30.3 31.4 32.4 33.3 34.3 35.1 36.06 6.5 29.1 30.4 31.6 32.8 33.9 34.9 35.9 36.9 37.9

2-row 1 0.6 35.0 35.9 36.8 37.6 38.8 38.9 39.5 — —Capacity 2 2.0 44.4 46.1 47.6 49.1 50.5 51.7 52.9 — —

MBH 4 6.8 50.8 53.1 55.3 57.4 59.4 61.2 63.0 — —6 13.9 53.3 55.9 58.4 60.7 63.0 65.1 67.1 — —


Rows Gpm WPD (ft) 800 910 1020 1130 1240 1350 1460 1570 1680

1-row 1 0.4 27.6 28.5 29.2 30.3 31.2 32.1 32.8 33.6 34.2Capacity 2 1.3 33.3 34.7 35.8 37.5 39.0 40.5 41.8 43.0 44.1

MBH 4 4.3 37.0 38.8 40.3 42.5 44.5 46.4 48.2 49.8 51.46 8.8 38.4 40.5 42.1 44.5 46.7 48.8 50.8 52.7 54.4

2-row 1 0.8 41.4 43.1 44.5 45.7 46.8 47.7 48.5 49.2 —Capacity 2 2.6 53.5 56.9 59.9 62.6 65.0 67.2 69.1 70.9 —

MBH 4 9.0 61.3 66.1 70.5 74.5 78.3 81.7 85.0 88.0 —5 13.4 63.0 68.1 72.9 77.3 81.4 85.2 88.8 92.1 —


Rows Gpm WPD (ft) 1300 1450 1600 1750 1900 2050 2200 2350 2500

1-row 1 0.4 31.7 32.8 33.7 34.6 35.4 36.1 36.7 37.3 37.8Capacity 2 1.3 39.8 41.7 43.3 44.8 46.2 47.5 48.7 49.9 50.9

MBH 4 4.3 45.5 48.0 50.3 52.4 54.4 56.2 58.8 59.6 61.26 8.8 47.9 50.6 53.2 55.5 57.8 59.9 61.9 63.8 65.6

2-row 1 0.8 47.3 48.4 49.3 50.1 50.8 51.4 — — —Capacity 2 2.6 66.2 69.0 71.4 73.6 75.5 77.3 — — —

MBH 4 9.0 80.2 84.7 88.8 92.5 96.0 99.2 — — —5 13.4 83.5 88.5 93.0 97.2 101.1 104.8 — — —

Note: Water Coil located on plenum inlet.

27VAV-SLM005-EN

ParallelFan-Powered


ETI—Fan Sizes 0404, 0504, 0604, 0804, 0806, 0811 (I-P)Airflow (Cfm)

Rows Gpm WPD (ft) 200 300 400 500 600 700 800

1-row 0.5 0.4 10.74 12.81 14.25 15.31 16.12 16.73 17.21Capacity 1 1.2 12.50 15.51 17.81 19.64 21.16 22.44 23.53

MBH 2 4.2 13.60 20.89 20.25 22.71 24.83 26.68 28.333 8.8 14.02 17.99 21.22 23.96 26.34 28.45 30.345 22.1 — 18.59 22.07 25.06 27.69 30.05 32.31

2-row 0.5 0.1 13.92 16.60 18.32 — — — —Capacity 1 0.3 — 21.37 24.65 27.19 29.21 30.86 32.21

MBH 2 1.2 — — — 33.3 36.62 39.45 41.923 2.5 — — — — 39.88 43.32 46.385 6.2 — — — — — 46.97 50.64

ETI—Fan Sizes 1006, 1018, 1211, 1218, 1221 (I-P)Airflow (Cfm)

Rows Gpm WPD (ft) 400 600 800 1000 1200 1400 1600 1800

1-row 0.5 0.5 16.33 18.56 19.91 20.73 — — — —Capacity 1 1.6 20.62 24.72 27.64 29.84 31.55 32.92 34.01 34.88

MBH 2 5.5 23.56 29.25 33.62 37.15 40.11 42.62 44.81 46.723 11.3 24.73 31.10 36.14 40.13 43.87 46.96 49.70 52.145 28.2 25.74 32.75 38.42 43.21 47.36 51.03 54.32 57.30

2-row 0.5 0.1 20.24 — — — — — — —Capacity 1 0.5 27.44 32.90 36.51 39.05 40.88 42.21 43.18 43.86

MBH 2 1.6 — 41.49 47.98 53.05 57.15 60.54 63.37 65.783 3.2 — — 53.24 59.73 65.17 69.81 73.82 77.335 8.0 — — — 66.22 73.11 79.14 84.49 89.29

ETI—Fan Sizes 1411, 1418, 1424, 1621, 1624 (I-P)Airflow (Cfm)

Rows Gpm WPD (ft) 1000 1200 1400 1600 1800 2000 2200

1-row 0.5 0.6 21.69 — — — — — —Capacity 1 1.8 31.45 33.28 34.74 34.01 36.85 37.61 38.21

MBH 2 6.3 39.38 42.56 45.27 47.63 49.69 51.52 53.153 12.8 42.81 46.66 50.01 52.98 55.63 58.02 60.205 31.2 45.96 50.47 54.47 58.05 61.31 64.28 67.02

2-row 0.5 — — — — — — — —Capacity 1 0.6 40.59 42.53 43.96 45.00 45.75 — —

MBH 2 1.8 55.45 59.82 63.44 66.47 69.04 7125 73.153 3.7 62.55 68.38 73.36 77.67 81.45 84.78 87.765 9.1 69.45 76.86 83.36 89.15 94.34 99.04 103.32

Notes:1. Data is based on entering water temperature of 180°F and entering air temperature of 65°F.2. Water Coil located on plenum inlet.

28

ParallelFan-Powered



Price—Fan Size 20 (I-P)Airflow (Cfm)

Rows Gpm WPD (ft) 250 300 350 400 450 550 650

1-Row 0.5 .18 7.0 7.5 8.0 8.5 9.0 9.9 10.8Capacity 1.0 .45 8.1 8.7 9.3 9.9 10.5 11.6 12.7

MBH 2.0 1.54 9.1 9.9 10.6 11.3 12.0 13.3 14.53.0 3.17 9.7 10.5 11.3 12.0 12.8 14.2 15.5

2-Row 1.0 .45 13.2 13.9 14.6 15.2 15.8 17.0 18.2Capacity 2.0 1.54 16.1 17.0 17.9 18.7 19.5 21.0 22.5

MBH 4.0 5.29 19.3 20.4 21.5 22.5 23.5 25.3 27.16.0 10.88 21.3 22.6 23.8 24.9 26.0 28.1 30.0


Rows Gpm WPD (ft) 550 600 650 700 800 900 1000

1-Row 1.0 .22 13.2 13.7 14.2 14.8 15.8 16.8 17.8Capacity 2.0 .82 15.2 15.8 16.5 17.1 18.3 19.5 20.7

MBH 4.0 3.15 17.1 17.8 18.5 19.3 20.6 22.0 23.46.0 6.91 18.1 18.9 19.7 20.5 22.0 23.4 24.8

2-Row 1.5 .42 22.0 22.6 23.2 23.8 25.0 26.2 27.4Capacity 3.0 1.43 27.0 27.8 28.6 29.4 30.9 32.3 33.8

MBH 6.0 4.9 32.4 33.5 34.4 35.4 37.2 39.0 40.89.0 10.08 35.9 37.0 38.1 39.1 41.2 43.2 45.2


Rows Gpm WPD (ft) 800 900 1000 1100 1200 1300 1500

1-Row 1.0 .28 17.0 17.9 18.9 19.8 20.7 21.7 23.6Capacity 2.0 1.09 19.9 21.0 22.2 23.3 24.4 25.5 27.7

MBH 4.0 4.15 22.6 24.0 25.3 26.6 27.8 29.1 31.66.0 9.10 24.1 25.6 27.0 28.4 29.8 31.1 33.8

2-Row 1.5 .55 28.4 29.5 30.6 31.7 32.8 33.9 36.0Capacity 3.0 1.88 35.3 36.7 38.1 39.5 40.9 42.3 45.0

MBH 6.0 6.45 42.8 44.6 46.4 48.1 49.8 51.4 54.79.0 13.27 47.5 49.6 51.5 53.5 55.4 57.2 60.9


Rows Gpm WPD (ft) 1500 1600 1700 1800 1900 2000 2100

1-Row 1.5 .26 28.1 29.1 30.0 31.0 31.9 32.8 33.8Capacity 3.0 .99 33.0 34.1 35.2 36.4 37.5 38.6 39.7

MBH 6.0 3.78 37.6 38.9 40.2 41.5 42.7 44.0 45.39.0 8.28 40.2 41.5 42.9 44.3 45.7 47.0 48.4

2-Row 2.0 .56 44.0 45.0 46.1 47.1 48.2 49.3 50.3Capacity 4.0 1.93 55.0 56.4 57.7 59.0 60.4 61.7 63.0

MBH 8.0 6.60 67.1 68.8 70.4 72.1 73.7 75.3 77.012.0 13.58 74.7 76.6 78.4 80.3 82.1 83.9 85.7


Rows Gpm WPD (ft) 2000 2100 2200 2300 2400 2500 2600

1-Row 1.5 .29 33.7 34.6 35.5 36.4 37.3 38.2 39.1Capacity 3.0 1.13 40.0 41.0 42.1 43.2 44.2 45.3 46.4

MBH 6.0 4.31 45.9 47.1 48.3 49.6 50.8 52.0 53.29.0 9.45 49.2 50.5 51.8 53.1 54.4 55.7 57.0

2-Row 3.0 .43 58.2 59.4 60.5 61.6 62.8 63.9 65.0Capacity 6.0 1.47 72.3 73.7 75.1 76.5 77.9 79.3 80.7

MBH 12.0 5.02 87.6 89.4 91.1 92.8 94.5 96.2 97.818.0 10.33 97.3 99.2 101.1 103.0 104.9 106.7 108.6

Note: Water Coil located on plenum inlet.

29VAV-SLM005-EN

ParallelFan-Powered


Nailor—Fan Size 2 (I-P)Airflow (Cfm)

Rows Gpm WPD (ft) 200 300 400 500 600 700

1-Row 1 1 9.75 11.9 13.8 14.9 15.9 16.8Capacity 2 3.75 10.5 13.1 15.2 16.9 18.3 19.5

MBH 4 10.0+ 11.0 14.0 16.2 18.1 19.75 21.25 10.0+ 11.1 14.1 16.5 18.5 20.1 21.5

2-Row 1 0.28 13.9 17.4 19.8 21.9 23.5 24.9Capacity 2 1 15.3 19.9 23.5 26.5 28.8 31

MBH 4 3.6 16.1 21.5 25.9 29.4 32.6 35.55 5.7 16.5 22 26.5 30.2 33.5 36.4

Nailor—Fan Sizes 3 & 4 (I-P)Airflow (Cfm)

Rows Gpm WPD (ft) 300 500 700 900 1100 1300

1-Row 1 1.2 12.8 16.1 18.4 19.9 21.3 22.4Capacity 2 4.5 14.2 18.3 21.4 23.5 25.4 27.0

MBH 4 10.0+ 15.0 19.8 23.2 26.0 28.3 30.45 10.0+ 15.2 20.0 23.7 26.6 29.0 31.2

2-Row 1 0.3 18.1 23.0 30.5 28.6 30.5 31.8Capacity 2 1.2 20.9 28.1 35.2 37.1 40.3 43.0

MBH 4 4.3 22.1 31.2 40.8 43.4 47.8 51.45 6.9 23.0 32.2 39.0 44.8 49.4 53.4

Nailor—Fan Size 5 (I-P)Airflow (Cfm)

Rows Gpm WPD (ft) 600 800 1000 1200 1400 1600 1800

1-Row 1 0.19 19.1 21.4 22.8 24.1 25.2 26.2 26.8Capacity 2 0.75 22.8 25.9 28.4 30.3 32.0 33.5 34.8

MBH 4 2.8 25.1 29.0 32.1 34.6 37.0 39.0 41.05 4.3 25.7 29.7 33.0 35.7 38.1 40.5 42.4

2-Row 1 0.16 27.0 30.4 32.2 34.0 35.1 36.2 37.2Capacity 2 0.58 32.0 35.4 43.0 46.5 49.2 51.5 53.8

MBH 4 2.3 38.0 46.0 51.6 56.6 60.9 62.0 67.85 3.4 40.0 47.8 53.9 59.1 63.5 67.9 71.5

Nailor—Fan Sizes 6 & 7 (I-P)Airflow (Cfm)

Rows Gpm WPD (ft) 1000 1200 1400 1600 1800 2000 2200

1-Row 1 0.27 25.9 26.7 28.8 29.6 30.5 31.2 32.0Capacity 2 0.97 32.2 33.9 36.8 38.6 40.0 41.5 42.8

MBH 4 3.6 37.0 39.0 42.9 45.4 47.5 49.5 51.58 5.5 37.9 39.6 44.4 47.0 49.3 51.8 53.8

2-Row 1 0.19 35.3 37.0 38.2 39.8 41.9 41.3 42.2Capacity 2 0.7 37.6 53.4 55.0 57.8 59.8 61.3 63.0

MBH 5 2.8 59.8 66.4 71.9 76.3 80.6 82.4 88.110 4.0 65.0 73.0 79.4 86.3 91.3 96.2 101.3

Note: Water Coil located internally on parallel unit.

30

ParallelFan-Powered


PerformanceData—Electric Coil

Fan Electrical PerformanceMaximum FLA

Fan Size HP 120 V 208/240 V 277 V

2 1/6 3.6 1.5 1.33 1/4 5.3 2.6 2.24 1/3 7.8 3.2 2.95 1/3 9.2 3.3 3.26 3/4 12.3 6.3 5.4

(Note: DIFFERENT motors than series units.)

TQP Titus Electric Coil kW Guidelines—Minimum to MaximumFan Single-Phase Voltage Three-Phase VoltageSize Stages 208 V/240 V 277 V 347 V 480 V 208 V 480 V 575 V

2 1 0.5–7.0 0.5–7.0 — — 1.5–6.5 1.5–8.5 —(200–600 cfm) 2 1.0–7.0 1.0–7.0 — — 1.5–6.5 1.5–8.5 —

3 1.5–7.0 1.5–7.0 — — 1.5–6.5 1.5–8.5 —3 1 0.5–8.0 0.5–11.5 — — 1.5–13.0 1.5–14.0 —

(410–1270 cfm) 2 1.0–8.0 1.0–11.5 — — 1.5–13.0 1.5–14.0 —3 1.5–8.0 1.5–11.5 — — 1.5–13.0 1.5–14.0 —

4 1 0.5–8.0 0.5–11.5 — — 1.5–14.0 1.5–16.0 —(840–1500 cfm) 2 1.0–8.0 1.0–11.5 — — 1.5–14.0 1.5–16.0 —

3 1.5–8.0 1.5–11.5 — — 1.5–14.0 1.5–16.0 —5 1 0.5–8.0 0.5–11.5 — — 1.5–14.0 1.5–19.0 —

(700–1700 cfm) 2 1.0–8.0 1.0–11.5 — — 1.5–14.0 1.5–19.0 —3 1.5–8.0 1.5–11.5 — — 1.5–14.0 1.5–19.0 —

6 1 0.5–8.0 0.5–11.5 — — 1.5–14.0 1.5–26.0 —(1340–2650 cfm) 2 1.0–8.0 1.0–11.5 — — 1.5–14.0 1.5–26.0 —

3 1.5–8.0 1.5–11.5 — — 1.5–14.0 1.5–26.0 —

VPEF Trane Electrical Coil kW Guidelines—Minimum to MaximumFan Single–Phase Voltage Three–Phase VoltageSize Stages 208V/240V 277V 347V 480V 208V 480V 575V

01 1 0.5–4.0 0.5–4.0 0.5–4.0 0.5–4.0 1.0–4.0 1.0–4.0 1.5–4.0(210–500 cfm) 2 0.5–4.0 1.0–4.0 1.0–4.0 1.0–4.0 1.0–4.0 2.0–4.0 3.0–4.0

3 1.0–4.0 1.0–4.0 1.5–4.0 1.0–4.0 1.5–4.0 3.0–4.0 —02 1 0.5–6.0 0.5–6.0 0.5–6.0 0.5–6.0 1.0–6.0 1.0–6.0 1.5–6.0

(300–615 cfm) 2 0.5–6.0 1.0–6.0 1.0–6.0 1.0–6.0 1.0–6.0 2.0–6.0 3.0–6.03 1.0–6.0 1.0–6.0 1.5–6.0 1.0–6.0 1.5–6.0 3.0–6.0 4.5–6.0

03 1 0.5–8.0 0.5–8.0 0.5–8.0 0.5–8.0 1.0–8.0 1.0–8.0 1.5–8.0(500–925) cfm) 2 0.5–8.0 1.0–8.0 1.0–8.0 1.0–8.0 1.0–8.0 2.0–8.0 3.0–8.0

3 1.0–8.0 1.0–8.0 1.5–8.0 1.0–8.0 1.5–8.0 3.0–8.0 4.5–8.004 1 0.5–8.0 0.5–9.0 0.5–9.0 0.5–9.0 1.0–9.0 1.0–9.0 1.5–9.0

(575–1150cfm) 2 0.5–8.0 1.0–9.0 1.0–9.0 1.0–9.0 1.0–9.0 2.0–9.0 3.0–9.03 1.0–8.0 1.0–9.0 1.5–9.0 1.0–9.0 1.5–9.0 3.0–9.0 4.5–9.0

05 1 0.5–8.0 0.5–12.0 0.5–12.0 0.5–12.0 1.0–14.0 1.0–12.0 1.5–12.0(1000–1675 cfm) 2 0.5–8.0 1.0–12.0 1.0–12.0 1.0–12.0 1.0–14.0 2.0–12.0 3.0–12.0

3 1.0–8.0 1.0–12.0 1.5–12.0 1.0–12.0 1.5–14.0 3.0–12.0 4.5–12.006 1 0.5–8.0 0.5–12.0 0.5–15.0 0.5–16.0 1.0–15.0 1.0–16.0 1.5–16.0

(1000–2350 cfm) 2 0.5–8.0 1.0–12.0 1.0–15.0 1.0–16.0 1.0–15.0 2.0–16.0 3.0–16.03 1.0–8.0 1.0–12.0 1.5–15.0 1.0–16.0 1.5–15.0 3.0–16.0 4.5–16.0

07 1 0.5–8.0 0.5–11.0 0.5–15.0 0.5–20.0 1.0–14.0 1.0–20.0 1.5–20.0(1300–2500 cfm) 2 0.5–8.0 1.0–11.0 1.0–15.0 1.0–20.0 1.0–14.0 2.0–20.0 3.0–20.0

3 1.0–8.0 1.0–11.0 1.5–15.0 1.0–20.0 1.5–14.0 3.0–20.0 4.5–20.0

Fan Electrical PerformanceMaximum FLA

Fan Size HP 120 V 208 V 277 V 347 V

01 1/8 1.6 — 0.7 0.702 1/8 1.6 — 0.7 0.703 1/3 5.4 — 1.8 1.504 1/3 5.4 — 1.8 1.505 1/2 7.6 — 2.6 2.106 1/2 — 6.3 3.8 3.807 1 — 6.9 4.7 3.6

(Note: Same motors as series units.)

31VAV-SLM005-EN

ParallelFan-Powered


Fan Electrcial Performance

VFR ETI Electric Coil kW Guidelines—Minimum to MaximumFan Single-Phase Voltage Three-Phase VoltageSize Stages 208 V/240 V 277 V 347 V 480 V 208 V 480 V 575 V

4 1 6.0 6.0 6.0 6.0 6.0 6.0 6.0(215–420 cfm) 2 6.0 6.0 6.0 6.0 6.0 6.0 6.0

3 6.0 6.0 6.0 6.0 6.0 6.0 6.06 1 8.5 8.5 8.5 8.5 8.5 8.5 8.5

(480–595 cfm) 2 8.5 8.5 8.5 8.5 8.5 8.5 8.53 8.5 8.5 8.5 8.5 8.5 8.5 8.5

11 1 16 16 16 16 16 16 16(690–1150 cfm) 2 16 16 16 16 16 16 16

3 16 16 16 16 16 16 1618 1 27 27 27 27 27 27 27

(1450–1890 cfm) 2 27 27 27 27 27 27 273 27 27 27 27 27 27 27

21 1 29 29 29 29 29 29 29(1600–2075 cfm) 2 29 29 29 29 29 29 29

3 29 29 29 29 29 29 2924 1 34 34 34 34 34 34 34

(1800–2400 cfm) 2 34 34 34 34 34 34 343 34 34 34 34 34 34 34

Notes:1. Maximum kW determined by dividing the actual fan capacity (cfm) by 70 (i.e. maximum 70 cfm per kW= 45° rise)2. Cfms are at 0.25" w.c.

Max FLAFan Size HP 120 V 277 V

04 1/13 1.1 0.506 1/6 2.6 0.911 1/4 4.9 1.918 1/2 8.8 3.621 3/4 9.7 3.824 1 12.3 4.5

(Note: Same motors as series units.)

Fan Electrical Performance

Max FLAFan Size HP 120 V 277 V

20 1/8 2.9 1.130 1/4 4.7 1.740 1/2 9.8 3.250 3/4 12.3 4.460 1 — 7.8

(Note: DIFFERENT motors than series units.)

FEV Price Electric Coil kW Guidelines—Minimum to MaximumFan Single-Phase Voltage Three-Phase VoltageSize Stages 208 V/240 V 277 V 347 V 480 V 208 V 480 V 600 V

20 1 9.0/10 10 — — 10 10 10(220–670 cfm) 2 9.0/10 10 — — 10 10 10

3 9.0/10 10 — — 10 10 1030 1 8.5/10 12.5 — — 14.5 17 17

(500–1250 cfm) 2 8.5/10 12.5 — — 14.5 17 173 8.5/10 12.5 — — 14.5 17 17

40 1 7.5/8.5 12.2 — — 13 28.5 28.5(780–1910 cfm) 2 7.5/8.5 12.2 — — 13 28.5 28.5

3 7.5/8.5 12.2 — — 13 28.5 28.550 1 7.0/8.5 11.5 — — 12.5 34 34

(1490–2450 cfm) 2 7.0/8.5 11.5 — — 12.5 34 343 7.0/8.5 11.5 — — 12.5 34 34

60 1 7.0/9.5 11 — — 12.5 33 42.5(2000–2900 cfm) 2 7.0/9.5 11 — — 12.5 33 42.5

3 7.0/9.5 11 — — 12.5 33 42.5Notes:1. Minimum kW: Single-Phase=0.5 kW per stage. Three-Phase=1.5 kW per stage.2. Minimum airflow requirement of 70 cfm/kW

32

ParallelFan-Powered



Fan Electrical PerformanceMax FLA

Fan Size HP 120 V 208 V 277 V

2 1/6 4.8 1.8 1.53 1/4 5.8 3.6 1.84 1/3 6.2 4.1 2.05 1/2 10.1 6.5 3.3

6, 7 3/4 13.4 8.4 4.5Note: DIFFERENT motors than series units.Information listed is at high speed)

35PE Nailor Electric Coil kW Guidelines—Minimum to MaximumFan Single-Phase Voltage Three-Phase VoltageSize Stages 208 V/240 V 277 V 347 V 480 V 208 V 480 V 575 V

2 1 0.5–7.0 0.5–7.0 — — 0.5–7.0 0.5–7.0 —(150–540 cfm) 2 0.5–7.0 0.5–7.0 — — 0.5–7.0 0.5–7.0 —

3 0.5–7.0 0.5–7.0 — — 0.5–7.0 0.5–7.0 —3 1 0.5–8.0 .05–11.5 — — .05–11.5 .05–11.5 —

(150–775 cfm) 2 0.5–8.0 .05–11.5 — — .05–11.5 .05–11.5 —3 0.5–8.0 .05–11.5 — — .05–11.5 .05–11.5 —

4 1 0.5–8.0 .05–11.5 — — 0.5–14.5 .05–16.0 —(650–1080 cfm) 2 0.5–8.0 .05–11.5 — — 0.5–14.5 .05–16.0 —

3 0.5–8.0 .05–11.5 — — 0.5–14.5 .05–16.0 —5 1 0.5–8.0 .05–11.5 — — 0.5–14.5 0.5–20.5 —

(590–1400 cfm) 2 0.5–8.0 .05–11.5 — — 0.5–14.5 0.5–20.5 —3 0.5–8.0 .05–11.5 — — 0.5–14.5 0.5–20.5 —

6 1 0.5–8.0 .05–11.5 — — 0.5–14.5 0.5–25.0 —(860–1670 cfm) 2 0.5–8.0 .05–11.5 — — 0.5–14.5 0.5–25.0 —

3 0.5–8.0 .05–11.5 — — 0.5–14.5 0.5–25.0 —7 1 0.5–8.0 .05–11.5 — — 0.5–14.5 0.5–28.0 —

(1050–2185 cfm) 2 0.5–8.0 .05–11.5 — — 0.5–14.5 0.5–28.0 —3 0.5–8.0 .05–11.5 — — 0.5–14.5 0.5–28.0 —

33VAV-SLM005-EN

ParallelFan-Powered

CONFIDENTIAL DOCUMENT. FOR INTERAL USE ONLY.

SeriesFan-Powered

TitusDTQS, ETQS, and PTQS

� 6 fan sizes available, 320 to 3100 cfm (range based on .25 in. wg DSP)� 21 valve/fan combinations� 5-point flow cross sensing device� Cast position indicator on damper shaft� SCR fan speed control�DDC, Analog, or Pneumatic control options�Options include hot water coils or integral electric coils for reheat, and various ‘IAQ’

linings

TraneVSCF, VSWF, and VSEF

� 7 Fan sizes available, 280 to 3000 cfm (range based on .25 in. wg DSP)� 20 Valve/Fan Combinations�Minimum 16 measuring point flow ring�Metal encapsulated insulation edges standard for IAQ� Rugged contractor tough unit construction� Factory-commissioned controls�UL and ARI listed� Factory-mounting customer controls availability�DDC, Analog, or Pneumatic control options�Options include hot water coils or integral electric coils for reheat, and various ‘IAQ’

linings




Trane vs. Titus PageEncapsulated edges ............................................................................................ 37, 43Factory-commissioned controls .............................................................................. 40More measuring points on our flow ring ............................................................. 37, 43ARI certified units ...............................................................................................39, 43Air filter .............................................................................................................. 37, 43Filter frame ......................................................................................................... 37, 43Fan disconnect ................................................................................................... 37, 43Hanger brackets ................................................................................................. 37, 43

Unit access .............................................................................................................. 43Fan Cfm ranges ............................................................................................ 44, 48–51SCR fan speed control ............................................................................................. 44

80/20 nickel chrome wire .......................................................................................... 44Dust tight enclosure for electric reheat ..................................................................... 44kW availability .......................................................................................... 40, 43, 65–66Analog controls ....................................................................................................... 39Steam coils .............................................................................................................. 43

ProductFeatures

SeriesFan-Powered

CONFIDENTIAL DOCUMENT. FOR INTERAL USE ONLY. 34VAV-SLM005-EN

ProductFeatures

Enviro-Tech (ETI)CFR, CFR-WC, and CFR-EH

� 9 fan sizes available, 230–4700 cfm (range based on .25 in. wg DSP)� 24 valve/fan combinations� 12-point Flow Star™ flow sensing device, (available for size 6” and above)�Mechanically fastened insulation�DDC, Analog, or Pneumatic control options�Options include hot water coils or integral electric coils for reheat, and various ‘IAQ’

linings


� 7 Fan sizes available, 280 to 3000 cfm (range based on .25 in. wg DSP)� 20 Valve/Fan Combinations�Minimum 16 measuring point flow ring�Metal encapsulated insulation edges standard for IAQ� Rugged contractor tough unit construction� Factory-commissioned controls�UL and ARI listed� Factory-mounting customer controls availability� DDC, Analog, or Pneumatic control options�Options include hot water coils or integral electric coils for reheat, and various ‘IAQ’

linings

Transformer ....................................................................................................... 44Factory-commissioned controls ......................................................................... 40Manual secondary cutout standard with electric reheat .................................. 38, 43Flow ring on smaller units (5" inlet) / ETI uses a flow bar ..................................37, 43120-volt ECM option ........................................................................................... 44Air filter ..........................................................................................................37, 43Filter frame .....................................................................................................37, 43Fan disconnect ...............................................................................................37, 43Hanger brackets .............................................................................................37, 43

Dual-wall insulation option .................................................................................. 43External actuator ................................................................................................ 43Damper position indicator .................................................................................. 43

Line fuses for electric heat standard for ETI ......................................................... 43SCR electric heat control ................................................................................ 41, 44120-volt electric heat option ................................................................................ 44Fan cfm range ...........................................................................................44, 48, 51Electric reheat kW/voltage/staging options .......................................................... 40

Trane vs. ETI PageGreen = Trane is advantaged



SeriesFan-Powered


ProductFeatures

PriceFDC, FEC, FPC

� 6 fan sizes available, 250–4000 (range based on .25 in. wg DSP)� 11 valve/fan combinations� Factory calibrated to job requirements� SP-200 multi-point flow sensor with 12 measuring points�DDC, Analog or Pneumatic control options�Options include hot water coils or integral electric coils for reheat, attenuators, and

various insulations


� 7 Fan sizes available, 280 to 3000 cfm (range based on .25 in.wg. DSP)� 20 Valve/Fan Combinations�Minimum 16 measuring point flow ring�Metal encapsulated insulation edges standard for IAQ� Rugged contractor tough unit construction� Factory-commissioned controls�UL and ARI listed� Factory-mounting customer controls availability�DDC, Analog, or Pneumatic control options�Options include hot water coils or integral electric coils for reheat, and various ‘IAQ’

linings




Valve/fan combinations ................................................................................... 43, 46Lower damper leakage ......................................................................................... 43More measuring point on our flow ring ............................................................ 37, 43Water coil access is standard with hot water reheat ............................................ 44Air filter ........................................................................................................... 37, 43Filter frame ...................................................................................................... 37, 43Fan disconnect ................................................................................................ 37, 43Hanger brackets .............................................................................................. 37, 43

Manual secondary outout for electric reheat ................................................... 38, 43Factory-commissioned DDC controls .................................................................. 40Electric heat wire type .......................................................................................... 44

Perforated liner ............................................................................................... 40, 43SCR electric heat control ................................................................................. 41, 44120-volt electric heat ............................................................................................ 44kW range ................................................................................................... 43, 65, 68Fan cfm range ............................................................................................ 44, 48–51Attenuators ......................................................................................................... 44

Trane vs. Price Page

SeriesFan-Powered


ProductFeatures


� 7 Fan sizes available, 280 to 3000 cfm (range based on .25 in.wg. DSP)� 20 Valve/Fan Combinations�Minimum 16 measuring point flow ring�Metal encapsulated insulation edges standard for IAQ� Rugged contractor tough unit construction� Factory-commissioned controls�UL and ARI listed� Factory-mounting customer controls availability� DDC, Analog, or Pneumatic control options�Options include hot water coils or integral electric coils for reheat, and various ‘IAQ’

linings




Trane vs. Nailor PageEncapsulated edges ........................................................................................37, 43Factory-commissioned controls ......................................................................... 40Valve/fan combinations .................................................................................. 43, 46Lower damper leakage ........................................................................................ 43Manual secondary cutout for electric reheat .................................................. 38, 43ARI certified units .......................................................................................... 39, 43Air filter ..........................................................................................................37, 43Filter frame .....................................................................................................37, 43Fan disconnect ...............................................................................................37, 43Hanger brackets .............................................................................................37, 43

Single-point power ............................................................................................. 44Transformer standard ......................................................................................... 44

SCR electric heat control ................................................................................ 41, 44PSC fan cfm range ....................................................................................44, 48–51ECM performance ......................................................................................... 73–74Attenuators ........................................................................................................ 44

Nailor35S, 35SW, 35SE

� 6 Fan sizes available. 300 – 3700 cfm (range based on .25 in.wg. DSP)� 15 Valve/Fan Combinations� Inclined opposed blade damper design� “Diamond Flow” multi-point averaging sensor with 8 measuring points� DDC, Analog, Pneumatic control options�Options include hot water coils or integral electric coil for reheat, attenuators, and

various IAQ linings

SeriesFan-Powered


FeatureEvaluation

Hanger Brackets/Air Filter/Filter Frame/Fan DisconnectTrane provides hanger brackets, air filter, filter frame, and a fan disconnect asstandard. When Trane is in control of the specifications, make sure that we aremaking our competition provide these options in their bill of materials.

Metal Encapsulated EdgesAll VariTrane units are complete with metal encapsulated insulation edges. Thisencapsulated design arrests cut fibers and prevents erosion of the fibers into theairstream. As a standard, our competition “butters” the edges of the exposedinsulation with an adhesive spray intended to hold the fibers together. After beinghandled, and over time, the adhesive breaks down and allows fibers to escape intothe airstream. This is clearly not equivalent! Specifying VariTrane metal encapsulatededges will force the competition to add additional dollars to their units. Whether ornot Trane is basis of design, make sure the consultant understands the significance ofmetal encapsulated edges.

Suggested Spec

INSULATION EDGE TREATMENT—All cut edges of insulation shall completelyenclosed by metal to arrest cut fibers and prevent erosion into the airstream.

Number of Measuring Points on our Flow Ring (How low canyou go?)The accuracy of a flow-measuring device is determined by the lowest allowableminimum cfm setting. Below this cfm, the VAV units will change from pressure-independent (PI) to pressure-dependent (PD) control. Because VariTrane units aredesigned to integrate into a DDC control system, the UCM, flow ring, and pressuretransducer create a flow measurement “system” which provides unmatched flowperformance in the VAV industry. Accuracy is +/- 5% from maximum to minimumcfm. See pp. XX for a comparison of Trane vs. the competition.

Given:A consultant is designing a space that requires 800 cfm maximum airflow. Ventilationis determined by minimum occupancy = 8 persons. 15 cfm/person equates to 120minimum cfm.

Using the VariTrane Quick Select (VAV-SLP001-EN), the consultant chooses an 8”inlet.

The 8” VariTrane air valve can have a minimum set as low as 110 cfm. Thus, the 120cfm minimum is available. Competitor “N” has a minimum which stops at 150 cfmand can be no lower. Let’s look at the system/cost impact:

Find:The efficiency impact by having a higher minimum cfm setting.

Assume:�Unit operates for 3000 hours per year

�Unit is providing reheat 50% of the time.

� Room setpoint (winter) = 70°F

� Supply air = 55°F

Solution:When in reheat, the VAV unit operates at its minimum airflow. VAV systems typicallyhave 55°F primary air temperature. Let’s see how this 30 cfm can impact operatingcosts:

Qs = 1.085 x cfm x DT

The additional energy required by competitor “N” is

1.085 x 30 cfm x (70 – 55) = 488 Btuh

This equates to 732,375 Btu per year, per 8” valve, which is an increase of 25% inenergy required to reheat the air up to room temperature.

SeriesFan-Powered


FeatureEvaluation

Suggested Spec

Multi-point, multi-axis flow ring or cross sensor to be furnished and installed byterminal unit manufacturer. Single-point or flow bar sensors are not acceptable. Flowsensing device shall be capable of maintaining airflow to within +/- 5 percent of ratedunit airflow setpoint when installed with 1.5 duct diameters straight duct, of the samesize as the primary airflow inlet, upstream from the unit.

Water Coil MBH PerformanceOverall, we have the highest MBH performance out of our competition. This highperformance is the result of our higher water pressure drop on the coils. Don’t let thecompetition force you into using a 2-row coil if a 1-row coil can supply the specifiedMBH performance.

Suggested Spec

Hot Water Heating Coil—Coils shall be factory-installed and shall consist of aluminum-plated fins and seamless copper tubes. Fins shall have full fin collars to provideaccurate fin spacing and maximum fin-to-tube contact. Tubes shall be mechanicallyexpanded into the fin collars. Coils shall be leak tested under water to 450 psig pres-sure. Supply and return water connections shall be on the same side of the coil.

Water Coil Pressure DropAt first glance, you will notice that Trane VAV water coils have a higher water pressuredrop than the competition. Typically, water pressure drop of VAV terminal units is not aconcern of engineers since the units are piped in a two-pipe configuration and the air-handler coil is in the same line. The air-handler water coil pressure drop is what thepump(s) will be sized for.

Manual Secondary Cutout“Electric heater shall be complete with automatic reset cutout and manual resetcutout. The manual reset cutout shall be capable of being reset by a switch, or pushbutton. Fusible links are not acceptable.”

Why is this important?A fusible link is a small wire sized to melt when it receives more amperage than it wasdesigned to handle. Once melted, it can cool and complete the circuit again. Thissafety issue is why Trane no longer uses fusible links.

Additionally, finding of a replacement part for a fusible link may be difficult. Therefore,the unit would be down for an extended period.

Water Coil AccessAll series units have an access panel as standard on the side of the unit. However,you will still require an access to clean the water coil. When a reheat water coil isprovided, access is provided as standard for coil cleaning. For our competition, this isan option.

Control Boxes as Standard for Units with NO ControlsWhat we do:

Field-Installed Controls:Approximately 50% of VAV controllers in the industry are “plenum rated”. This meansthey DO NOT NEED A CONTROL ENCLOSURE. If a control enclosure is required, thecontrols supplier should provide it. After all, they know the size, shape, etc. of theircontroller. If transformers, disconnects, and/or fuses are factory installed, then acontrol enclosure will be provided to house these. (A control box is available as adesign special.)

Factory-Installed Competitive Controls:When competitive controls are installed in the factory and the controller to beinstalled is a plenum rated controller, then no control box will be provided. If thecontroller is not plenum rated then a control box will be provided. (A control box isavailable as a design special.)

SeriesFan-Powered


Analog ControlsAnalog controls are a reduced cost solution for the end-user… or are they? AnalogVAV controllers have a similar cost as DDC VAV controllers. What they lack is theability to:�Monitor remotely

� Provide diagnostic data

� Provide feedback to building control panel

� DDC systems can recognize something is broken before it is even noticed by theoccupants. By the time occupants notice, a service technician can already be on theway.

� Leverage energy saving strategies such as static pressure optimization (required byASHRAE 90.1) or Ventilation Reset. (See http://www.trane.com/commercial/issues/iaq/ashrae.asp.com for additional details)

AcousticsMake sure you are doing an “apples to apples” comparison. Don’t let the competitionuse a less stringent sound power assumption or show cooling only information if re-heat is to be used.

Sound Power–if specifying a particular spectrum shape for a particularmanufacturer, this is the same as being a proprietary specification. This is notadvised.

NC (Noise Criteria)–NC level is determined by taking the sound power generatedusing ARI 880-98, and applying a transfer function. The Transfer function assumptionsin ARI 885-98 standard are significantly different than the 90 standard. On average, thesame unit, operating at the same conditions will show a 4 NC improvement if theolder, superceded 90 standard is used. Don’t let the competition catch you in this trap.

Said another way, if your customers specified NC 40 in the space prior to the 98standard being written, that is now equivalent to NC 44 with the current standard.

ARI CertificationAre the units that are specified ARI certified?

Titus has a quantity of 21 Valve/Fan combinations. However on the ARI web site, onlysix are listed as certified units.

Nailor has a total 15 Valve/Fan combinations listed in their catalog. However, on theARI web site only 14 of those are listed as certified units.

Trane has a quantity of 19 Valve/Fan combinations. On the ARI web site, all 19 arelisted as certified units.

If sound is going to be critical on specific units, make sure the units that we arecomparing to are listed on the ARI website (www.ariprimenet.org).

UL Rating for Electric HeatOur units have been tested, approved, and listed with UL as an entire assembly. MostVAV manufacturing companies have their units ETL listed in accordance with ULstandards.

UL never certifies a product until it passes all the standard requirements and a verystringent internal review process. The checks and balances system that UL hasalways implemented tends to cause delays to which manufacturers are very averse.

In addition, UL has a very comprehensive follow-up program to ensure that productsmade after certification continue to be manufactured consistently with the initiallycertified and tested product. ETL, on the other hand, is known within the test andmeasurement community to be less rigorous in both the certification and the follow-up of the products that they evaluate.

In short, the ETL Listed Mark indicates that your product has been tested by ITS ETLSEMKO, found in compliance with accepted national standards, and meets the

FeatureEvaluation

SeriesFan-Powered


Electric Reheat kW/Voltage/Staging OptionsThere are many reasons why units with electric reheat are not able to reach certainhigher kWs with 2- and 3-stage, or have certain number of stages with 3-phase units.The two major limited factors are wire size and the units discharge dimensions.

A heating element requires a certain length and diameter, and the correct number ofelements in order to obtain the correct staging. This determines the ohmage(resistance) needed to provide the desired kW. Since resistance and kW are inverselyproportional for a given voltage, higher kW heaters need very little element material,which means changing either the length or the diameter of the wire.

However, there are safety issues, UL and NEC regulations, and manufacturingpractices that limit the diameter from getting too small. Hence, only one alternativeexists and that is to change the length of the wire, which may not be long enough tofill the discharge area of the heater. Filling the discharge area is important to building aheater, because it will minimize stratification and will increase the longevity of theheater by minimizing hot spots.

Factory-CommissioningFactory-commissioning is more than just factory installed controls! Trane takes greatpride in being the industry leader in factory-commissioned DDC controls. Thefollowing table differentiates these concepts and indicates where options can beobtained (either the field, or the factory.):

Factory-installed Factory-commissioned

Transformer optionally installed X XWires terminated in reliable/ consistent setting X XController mounted X XElectric heat contactors and fan relay wired X XTesting of heater contactors and fan relay XController addressing and associated testing XMinimum & Maximum airflows (occupied/unoccupied) XMinimum & Maximum temperature setpoints(occupied/unoccupied) XMinimum ventilation requirements(used to calculate ventilation fraction) XThumbwheel enable/ disable XHeating offset X

Factory-commissioned controllers provide the highest quality and most reliablecontrollers for your VAV system. Additional testing verifies proper unit operationincluding occupied/unoccupied airflow, temperature setpoints, communication linkfunctionality, and output device functionality. The benefits of factory-commissioningare standard on VariTrane terminal units with Trane DDC controls.

Perforated LinersThe intended use of the perforated liner was for units that had a Mylar or Tedlarinsulation. Mylar and Tedlar insulation was found to have long-term durabilityproblems and would erode into the airstream over time. The perforated liner wasdesigned to hold the insulation with the idea to improve acoustical performance overa dual-wall construction.

Today, if a perforated liner is specified, it is generally used to prevent possible tearingof the insulation during installation. However, the perforated liner will still allow air topenetrate the insulation and loft fibers. Our best solution is to use a foil-face or dual-wall insulation option.

FeatureEvaluation

SeriesFan-Powered


FeatureEvaluation

SCR Electric Heat ControlTrane does not offer an option for SCR Electric Heat Control. Our competitors useSCR electric heat control, which is very expensive. We can achieve a modulating kWoperation using our DDC controls. Using pulse-width modulation, our DDC UCMcalculates how far from setpoint the temperature is and what percentage of theelectric heat it need to bring to satisfy the zone.

Suggested Spec

Pulse-Width Modulated (PWM)—At heating setpoint, energize first stage of heat. Thesecond stage of heating shall be energized based on time and temperature deviationfrom setpoint. Duty-cycle these stages on a three-minute window. Stage 1 shallmodulate from 0–50 percent deviation and be on continuously above 50%. Stage 2shall modulate from 50–100 percent deviation.

Lower Damper LeakageOur damper leakage rate is 1% @ 4 in. wg and Nailor’s leakage rate is 2% @ 3 in. wg.Nailor’s higher rate is the result of an opposed blade damper design, which generallyhas a higher leakage rate.

SeriesFan-Powered


ModelComparison

Model ComparisonVAV Terminal Units TRANE TITUS ETI PRICE NAILOR

Series VSCF xTQS CFR FxC 35SFan-Powered x = D (Digital) x = D (Digital)

Cooling E (Electronic) E (Electronic)P (Pneumatic) P (Pneumatic)

Series VSWF xTQS CFR-WC FxC 35SWFan-Powered w/ x = D (Digital) x = D (Digital)

Hot Water Reheat E (Electronic) E (Electronic)P (Pneumatic) P (Pneumatic)

Series VSEF xTQS CFH-EH FxC 35SEFan-Powered w/ x = D (Digital) x = D (Digital)Electric Reheat E (Electronic) E (Electronic)

P (Pneumatic) P (Pneumatic)Notes: For Titus and Price replace “x” for control options letter.

SeriesFan-Powered



Quick Competitive ComparisonSeries Fan-Powered Comparison


Product OfferingsInsulation Trane Titus ETI Price Nailor

1/2" Matte-Faced Insulation Std. Std. Std. Std. (3/4") Std. (3/4")1" Matte-Faced Insulation Opt. Opt. Opt. Opt. Opt.1/2" Foil-Faced Insulation Opt. Opt. Opt. Opt. Opt.1" Foil-Faced Insulation Opt. Opt. Opt. Opt. Opt.1" Dual-Wall Insulation Opt. Opt. Opt. Opt. Opt.3/8" Fiber-Free Insulation Opt. Opt. (3/4") N/A Opt. (3/4") N/APerforated Liner N/A N/A N/A Opt. Opt.External Insulation N/A N/A N/A N/A N/A

Insulation Edge Sealant

Metal Encapsulated Edges Std. Opt. Std. Std. Opt.Edge Spray N/A Std. N/A N/A Std.

Hanger Brackets Std. Opt. Opt. Opt. Opt.

Air Filter Std. Opt. Opt. Opt. Opt.

Filter Frame Std. Opt. Opt. Opt. Opt.

Fan Disconnect Std. Opt. Opt. Opt. Opt.

Power Fusing Opt. Opt. Opt. Opt Opt.

Access

Unit Access Std. Std. Std. Std. Std.Built-in Water Coil Access Std. N/A Std. Opt. Std.

Outlet Connection

Flange Std. Std. Std. Std. Std.Slip and Drive Opt. Opt. Opt.* Opt. Opt.*Note: ETI only has S&D connection on HW reheat as standard.

External Actuator Std. Std. Std. Std. Std.

Damper Position Indicator Std. Std. Std. N/A N/A

Damper/Fan Combinations

Damper Blade Indicator Std. Std. Std. N/A N/AQuantity of Size Combinations 20 21 24 11 15# of the units listed by ARI 20 6 24 11 6

Damper Leakage @ 3 in. wg 1% 1% <1% 2% 2%

Air Measurement

Flow Sensing Device Flow Ring Flow Cross Flow Star* Flow X Flow DiamondAccuracy +/-5% +/-5% +/-5% +/-5% +/-5%Min. Number Measuring Points 16 5 12 12 8*Note: ETI has a single point (flow bar) measuring device for sizes 5

Reheat Offering

Series/Cooling Only Opt. Opt. Opt. Opt. Opt.Series/Hot Water Reheat Opt. Opt. Opt. Opt. Opt.Series/Electric Reheat Opt. Opt. Opt. Opt. Opt.Steam Coils N/A Opt. Opt. N/A N/A

Hot Water Coils

1-Row Opt. Opt. Opt. Opt. Opt.2-Row Opt. Opt. Opt. Opt. Opt.3-Row N/A N/A Opt. N/A Opt.4-Row N/A N/A Opt. N/A N/A

Electric Heat Options

kW Range .5–24.0 kW .5–30.0 kW 5.0–40 kW .5–46.5 kW .5–32.5 kWUL Listed Assembly Std. N/A N/A N/A N/AETL Listed Assembly N/A Std. Std. Std. Std.Automatic Thermal Primary Cutout Std. Std. Std. Std. Std.Manual Secondary Reset Std. Opt. Opt. Std. Opt.Door Interlock Disconnect Opt. Opt. Opt. Opt. Opt.Line Fuse Opt. Opt. Std. Opt. Opt.

SeriesFan-Powered



Std. = Standard Opt. = Standard OptionalD/S = Design Special N/A = Option Not Available

Electric Heat Options (con't.) Trane Titus ETI Price Nailor

Airflow Switch Opt. Std. Opt. Opt. Std.Control Transformer Std. Std. Opt. Opt. Std.Fan Relay Std. Std. Std. Std. Std.Magnetic Contactors Std. Std. Std. Std. Std.Mercury Contactors Opt. Opt. Opt. Opt. Opt.P.E. Magnetic Contactors Opt. Opt. Opt. Opt. Opt.P.E. Mercury Contactors Opt. Opt. Opt. Opt. Opt.SCR Control N/A N/A Opt. N/A N/AHinged Access Door Std. Std. Std. Std. Std.NEMA 1 Type Enclosure Std. Std. Std. Std. Std.Dust Tight Enclosure D/S Opt. Opt. N/A Opt.Class “A” 80/20 Nickel Chrome Elements N/A Std. Std. Opt. Opt.Class “C” 60/16/24 Ni/Ch/Fe Elements Std. N/A N/A Std. Std.Single-point electrical connection Std. Std. Std. Opt. Std.115/120-volt, 1-phase heater N/A N/A Opt. Opt. N/A208/240-volt, 1-phase heater Opt. Opt. Opt. Opt. Opt.277-volt, 1-phase heater Opt. Opt. Opt. Opt. Opt.347-volt, 1-phase heater Opt. N/A Opt. Opt. N/A480-volt, 1-phase heater Opt. N/A Opt. N/A N/A208-volt, 3-phase heater Opt. Opt. Opt. Opt. Opt.240-volt, 3-phase heater N/A N/A Opt. N/A N/A480-volt, 3-phase heater Opt. Opt. Opt. Opt. Opt.575-volt, 3-phase heater Opt. N/A Opt. N/A N/A600-volt, 3-phase heater N/A N/A Opt. Opt. N/A

Motor Type

PSC Std. Std. Std. Std. Std.ECM Opt. Opt. Opt. Opt. Opt.

PSC Motor Sizes

115 volt Opt. Opt. Opt. Opt. Opt.277 volt Opt. Opt. Opt. Opt. Opt.208 volt Opt. Opt. Opt. N/A Opt.347 volt Opt. N/A Opt. N/A N/A

Horse Power

1/10 N/A N/A Opt. Opt. N/A1/8 Opt. N/A Opt. N/A Opt.1/6 N/A Opt. Opt. N/A N/A1/4 N/A Opt. Opt. Opt. Opt.1/3 Opt. Opt. Opt. Opt. N/A1/2 Opt. N/A Opt. Opt. Opt.3/4 N/A Opt. Opt. Opt. Opt.1 Opt. Opt. Opt. N/A Opt.

PSC Cfm Range @ .25 DSP 280–3000 cfm 320–3100 cfm 230–4700 cfm 250–4000 cfm 300–3700 cfm

Motor Speeds

Variable Speed (SCR) Std. Std. Std. Std. Std.Multi Speed N/A N/A Std. N/A N/ANote: ETI size 04 fan is 3-speed

ECM Motor Sizes

120 volt Opt. Opt. N/A Opt. Opt.277 volt Opt. Opt. Opt. Opt. Opt.

Controls

Direct Digital Controls Opt. Opt. Opt. Opt. Opt.Analog Controls Opt. Opt. Opt. Opt. Opt.Pneumatic Controls Opt. Opt. Opt. Opt. Opt.

Other Options

Attenuators D/S N/A N/A Opt. Opt.

SeriesFan-Powered


PrimaryInlet AirflowRanges (Cfm)

TraneInlet Total Cfm DDC Analog PneumaticSize Range Min–Max Min–Max Min–Max

05 0–350 45–350 82–350 65–35006 0–500 60–500 120–500 80–50008 0–900 110–900 210–900 140–90010 0–1400 165–1400 328–1400 220–140012 0–2000 235–2000 470–2000 320–200014 0–3000 320–3000 640–3000 425–300016 0–4000 420–4000 840–4000 560–4000

TitusInlet Total Cfm DDC Analog PneumaticSize Range Min–Max Min–Max Min–Max

6 0–500 80–500 80–500 150–5008 0–900 145–900 145–900 265–90010 0–1400 230–1400 230–1400 415–140012 0–2000 325–2000 325–2000 600–200014 0–3000 450–3000 450–3000 810–300016 0–4000 580–4000 580–4000 1100–4000

ETIInlet Total Cfm DDC Analog PneumaticSize Range Min–Max Min–Max Min–Max

4 0–250 30–250 35–250 45–2505 0–350 50–350 50–350 65–3506 0–550 55–530 60–550 75–4908 0–1000 105–1000 115–1000 145–96010 0–1600 165–1355 185–1600 235–154512 0–2300 240–2300 285–2300 340–225014 0–3100 335–3100 390–3100 475–310016 0–4100 440–4100 520–4100 625–410016 0–5500 600–5500 600–5500 600–5500

PriceInlet Total Cfm DDC Analog PneumaticSize Range Min–Max Min–Max Min–Max

6 0–450 66–450 66–450 66–4507 0–650 99–650 99–650 99–6508 0–800 132–800 132–800 132–8009 0–1050 167–1050 167–1050 167–105010 0–1350 221–1350 221–1350 221–135012 0–2100 304–2100 304–2100 304–210014 0–3000 439–3000 439–3000 439–300016 0–4000 568–4000 568–4000 568–4000

NailorInlet Total Cfm DDC Analog PneumaticSize Range Min–Max Min–Max Min–Max

6 0–500 70–500 70–500 85–5007 0–710 100–710 100–710 125–7108 0–1000 150–1000 150–1000 180–10009 0–1300 170–1300 170–1300 210–130010 0–1435 205–1435 205–1435 250–143512 0–2185 260–2185 260–2185 320–218514 0–2745 380–2745 380–2745 470–274516 0–3730 480–3730 480–3730 590–3730

18 Oval 0–4985 770–4985 770–4985 935–4985

SeriesFan-Powered


Valve/FanCombinations

Titus TQSInlet Sizes

Fan Sizes 4" 5" 6" 8" 10" 12" 14" 16" Total

2 (320–750 cfm) X X X X 213 (600–1440 cfm) X X X X4 (820–1550 cfm) X X X X5 (900–1880 cfm) X X X X6 (1400–2350 cfm) X X X7 (1320–3100 cfm) X X

Nailor 35SInlet

Fan Sizes 4" 5" 6" 8" 10" 12" 14" 16" 18"oval Total

2 (300–700 cfm) X X 153 (400–1140 cfm) X X X4 (670–1630 cfm) X X X5 (840–2000 cfm) X X X6 (1260–2570 cfm) X X7 (1675–3700 cfm) X X

Price FxCInlet Sizes

Fan Sizes 4" 5" 6" 8" 10" 12" 14" 16" Total

20 (250–680 cfm) X X 1130 (550–1200 cfm) X X40 (800–1980 cfm) X X50 (1500–2400 cfm) X X60 (2000–3200 cfm) X X70 (2500–4000 cfm) X

ETI CFRInlet Sizes

Fan Sizes 4" 5" 6" 8" 10" 12" 14" 16" 16x16" Total

4 (230–415 cfm) X X X 246 (520–625 cfm) X X X11 (780–1270 cfm) X X X18 (1675–2000 cfm) X X X21 (1700–2275 cfm) X X X24 (1990–2575 cfm) X X30 (3050–3350 cfm) X X X40 (3125–4200 cfm) X X44 (3840–4700 cfm) X X

Trane VSxFInlet Sizes

Fan Sizes 4" 5" 6" 8" 10" 12" 14" 16" Total

01 (280–500 cfm) X X X 2002 (375–700 cfm) X X X03 (540–1130 cfm) X X X04 (690–1260 cfm) X X X05 (950–1950 cfm) X X06 (1200–2400 cfm) X X X07 (1200–3000 cfm) X X X

SeriesFan-Powered


PerformanceData—SizeComparison

Trane VSxF—Size ComparisonFan Cooling Electric H2O Width Height Cooling Cooling Electric H2OSize Length Heat Length Footprint Volume Heat Length

Length (sq ft) (cu ft) Length Add Add

01 28 38 34.75 22 15.5 4.28 5.53 10.00 6.7502 28 38 34.75 22 15.5 4.28 5.53 10.00 6.7503 40 50 46.75 24 21.5 6.67 11.94 10.00 6.7504 40 50 46.75 24 21.5 6.67 11.94 10.00 6.7505 40 50 46.75 24 21.5 6.67 11.94 10.00 6.7506 40 50 46.75 30 21.5 8.33 14.93 10.00 6.7507 40 50 46.75 30 21.5 8.33 14.93 10.00 6.75

ETI CFR—Size ComparisonFan Cooling Electric H2O Width Height Cooling Cooling Electric H2OSize Length Heat Length Footprint Volume Heat Length


4 28 40 43.25 18 12 3.50 3.50 12.00 15.256 35 47 45 23.375 14 5.68 6.63 12.00 10.0011 35 47 45 23.375 14 5.68 6.63 12.00 10.0018 40 52 50 29.375 17 8.16 11.56 12.00 10.0021 40 52 50 29.375 17 8.16 11.56 12.00 10.0024 54 66 64 38 19 14.25 22.56 12.00 10.0030 62 74 67 52 19 22.39 35.45 12.00 5.0040 62 74 67 52 19 22.39 35.45 12.00 5.0044 62 74 67 52 19 22.39 35.45 12.00 5.00

Note: Electric heater may extend from 6" to 12", depending on options.

Price FxC—Size ComparisonFan Cooling Electric H2O Width Height Cooling Cooling Electric H2OSize Length Heat Length Footprint Volume Heat Length


20 28 34 37 24 14 4.67 5.44 6.00 9.0030 30 39 39 30 17.5 6.25 9.11 9.00 9.0040 32 41 41 36 17.5 8.00 11.67 9.00 9.0050 38 47 47 40 20 10.56 17.59 9.00 9.0060 38 47 47 46 20 12.14 20.23 9.00 9.0070 54.5 63.5 63.5 55 20 20.82 34.69 9.00 9.00

Note: Water coils are 6" w/o access door and 9" w/ access door.

Nailor 35S—Size ComparisonFan Cooling Electric H2O Width Height Cooling Cooling Electric H2OSize Length Heat Length Footprint Volume Heat Length


2 36 48.5 48 18 14 4.50 5.25 12.50 12.003 36 51.25 48 18 18 4.50 6.75 15.25 12.004 41 56.25 53 26 18 7.40 11.10 15.25 12.005 41 56.25 53 26 18 7.40 11.10 15.25 12.006 44 59.25 56 30 19 9.17 14.51 15.25 12.007 41 56.25 53 52 18 14.81 22.21 15.25 12.00

Titus TQS—Size ComparisonFan Cooling Electric H2O Width Height Cooling Cooling Electric H2OSize Length Heat Length Footprint Volume Heat Length


2 40.875 50.625 49.875 36.125 17.125 10.25 14.63 9.75 9.003 40.875 50.625 49.875 36.125 17.125 10.25 14.63 9.75 9.004 40.875 50.625 49.875 36.125 17.125 10.25 14.63 9.75 9.005 46.875 56.625 55.875 48.125 20.125 15.67 26.27 9.75 9.006 46.875 56.625 55.875 48.125 20.125 15.67 26.27 9.75 9.007 46.875 56.625 55.875 48.125 20.125 15.67 26.27 9.75 9.00

SeriesFan-Powered



Price Fan Performance @ .25" DSPCfm Size 20 Size 30 Size 40 Size 50 Size 60 Size 70

Cooling Max. — 675 1250 1900 2450 2900Only Min. — 225 500 790 1490 2000HW Max. — 580 1100 1750 2150 2750

1-row Min. — 225 500 790 1490 2000HW Max. — 540 975 1500 2000 2525

2-row Min. — 225 500 790 1490 2000

% Reduction from Cooling Only Max.Size 2 Size 3 Size 4 Size 5 Size 6 Size 7

1-row 0.0% 14.1% 12.0% 7.9% 12.2% 5.2%2-row 0.0% 20.0% 22.0% 21.1% 18.4% 12.9%

ETI Fan Performance @ .25" DSPCfm Size 4 Size 6 Size 11 Size 18 Size 21 Size 24 Size 30 Size 40 Size 44

Cooling Max. 410 595 1120 1900 2010 2390 — — —Only Min. 215 200 100 800 1000 1200 — — —HW Max. 400 580 1090 1850 1950 2300 — — —

1-row Min. 215 200 100 800 1000 1200 — — —HW Max. 390 570 1080 1800 1850 2150 — — —

2-row Min. 215 200 100 800 1000 1200 — — —

% Reduction from Cooling Only Max.Size 4 Size 6 Size 11 Size 18 Size 21 Size 24 Size 30 Size 40 Size 44

1-row 2.4% 2.5% 2.7% 2.6% 3.0% 3.8% 0.0% 0.0% 0.0%2-row 4.9% 4.2% 3.6% 5.3% 8.0% 10.0% 0.0% 0.0% 0.0%

Titus Fan Performance @ .25" DSPCfm Size 1 Size 2 Size 3 Size 4 Size 5 Size 6 Size 7

Cooling Max. — 600 1275 1480 1700 2630 —Only Min. — 200 410 830 650 1330 —HW Max. — 560 1150 1275 1600 2350 —

1-row Min. — 200 410 830 650 1330 —HW Max. — 550 1050 1150 1500 2175 —

2-row Min. — 200 410 830 650 1330 —


1-row 0.0% 6.7% 9.8% 13.9% 5.9% 10.6% 0.0%2-row 0.0% 8.3% 17.6% 22.3% 11.8% 17.3% 0.0%

Trane Fan Performance @ .25" DSPCfm Size 01 Size 02 Size 03 Size 04 Size 05 Size 06 Size 07

Cooling Max. 500 615 925 1150 1677 2350 2500Only Min. 210 300 500 575 675 1000 1300

` HW Max. 475 580 905 1110 1534 2100 21501-row Min. 210 300 500 575 675 1000 1300HW Max. 475 565 890 1080 1488 1900 1900

2-row Min. 210 300 500 575 675 1000 1300


1-row 5.0% 5.7% 2.2% 3.5% 8.5% 10.6% 14.0%2-row 5.0% 8.1% 3.8% 6.1% 11.3% 19.1% 24.0%

Nailor Fan Performance @ .25" DSPCfm Size 1 Size 2 Size 3 Size 4 Size 5 Size 6 Size 7

Cooling Max. — 575 830 1150 1510 1670 2185Only Min. — 150 150 640 590 870 1050HW Max. — 540 775 1090 1400 1670 1600

1-row Min. — 90 150 640 590 870 1050HW Max. — 540 775 1090 1400 1670 1600

2-row Min. — 90 150 640 590 870 1050


1-row 0.0% 6.1% 6.6% 5.2% 7.3% 0.0% 26.8%2-row 0.0% 6.1% 6.6% 5.2% 7.3% 0.0% 26.8%

SeriesFan-Powered


0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000

Cfm Range

2

4

70

20

40

60

04

11

21

30

44

3

5

7

02

04

06

Fan

Siz

e

Cool ing Fan Comparison

TRANE

TITUS

ETI

PRICE

NAILOR

50

30

06

18

28

40

2

4

6

01

03

05

07

3

65

7


SeriesFan-Powered



0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000CFM Range

2

4

6

20

40

60

11

21

30

44

3

5

7

02

04

06

Fan

Siz

e

Fan Comp arison 1-Row HW Reheat

NAILOR

PRICE

TITUS

TRANE

ETI

01

03

05

07

6

4

2

40

24

18

0406

30

50

70

3

5

7

SeriesFan-Powered


0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000

Cfm Range

2

4

6

20

40

60

04

11

21

30

44

3

5

7

02

04

06

Fan

Siz

e

Fan Comparison 2-Row HW Reheat

TRANE

TITUS

ETI

PRICE

NAILOR3

30

50

70

40

06

24

18

2

4

6

03

05

07

01

5

7


SeriesFan-Powered



Titus Air Pressure Drop—in. wg (I—P)Inlet/Fan Airflow TQS Fan Airflow TQS TQS Elec.

Size Cfm Cooling Size Cfm 1-row coil 2-row coil Heat

0802 300 0.036 2 200 0.01 0.01 —400 0.065 425 0.02 0.04 —625 0.158 650 0.04 0.08 —750 0.228 800 0.06 — —

1003 600 0.072 3 500 0.03 0.05 —750 0.112 700 0.05 0.09 —

1200 0.286 1000 0.09 0.18 —1400 0.39 1300 0.15 — —

1204 850 0.072 4 800 0.06 0.12 —1000 0.099 1040 0.10 0.19 —1300 0.168 1200 0.13 0.24 —1500 0.223 1440 0.18 — —

1205 900 0.057 5 700 0.02 0.03 —1100 0.086 1120 0.04 0.08 —1500 0.159 1400 0.06 0.12 —1800 0.23 1820 0.10 — —

1406 1500 0.098 6 1300 0.05 0.10 —1700 0.126 1720 0.09 0.17 —2250 0.221 2000 0.12 0.22 —2500 0.273 2420 0.16 — —

1607 1800 0.084 7 1500 0.07 0.13 —2150 0.12 1950 0.11 0.21 —2700 0.189 2400 0.16 0.30 —3100 0.249 2700 0.2 — —


05–01 280 0.08310 0.11325 0.12350 0.16

06–01 280 0.15350 0.24425 0.36500 0.51

08–01 280 0.05350 0.09450 0.15500 0.19

06–02 375 0.27425 0.35475 0.44500 0.49

08–02 375 0.11450 0.16525 0.23600 0.30

10–02 375 0.07500 0.13600 0.19700 0.26

08–03 540 0.16650 0.23750 0.32900 0.46

10–03 550 0.08700 0.13900 0.221100 0.32

08–04 700 0.29775 0.35850 0.42900 0.47

10–04 700 0.14800 0.181000 0.271200 0.42

Air Pressure Drop – in. wg (I-P) Air Pressure Drop – in. wg (I-P)Fan Airflow 1-Row HW 2-Row HWSize Cfm Coil Only Coil Only

01–02 280 0.02 0.05400 0.04 0.09500 0.06 0.12600 0.09 0.17700 0.11 0.21

03–05 540 0.02 0.04800 0.04 0.081100 0.07 0.141400 0.11 0.211700 0.16 0.291950 0.20 0.36

06–07 1200 0.04 0.111500 0.08 0.162000 0.17 0.262500 0.25 0.373000 0.30 0.50

Notes:1. Electric Coils Only per fan size add 0.01" (3 Pa) to

cooling only value.2. HW Coil Only pressure drops are just the heating coil.

12–04 700 0.10850 0.141000 0.201250 0.33

10–05 1000 0.191150 0.261250 0.311400 0.39

12–05 1000 0.121300 0.221600 0.341900 0.50

10–06 1175 0.191200 0.201300 0.231400 0.27

12–06 1200 0.111500 0.181800 0.262000 0.32

14–06 1500 0.121800 0.182100 0.242400 0.31

16–06 1500 0.121800 0.182100 0.242400 0.31

12–07 1200 0.241500 0.371800 0.532000 0.65

14–07 1500 0.142000 0.242500 0.383000 0.55

16–07 1500 0.102000 0.172500 0.273000 0.39

SeriesFan-Powered


ETI Air Pressure Drop—in. wg (I—P)Inlet/Fan Airflow CFR Fan Airflow CFR-WC CFR-EH

Size Cfm Cooling Size Cfm 1-row coil 2-row coil Elec. Heat

0404 100 0.01 4 100 0.01 0.01 —150 0.02 200 0.02 0.04 —200 0.03 300 0.04 0.08 —250 0.04 400 0.07 0.14 —

0504/ 100 0.01 6 200 0.01 0.02 —0506 200 0.02 300 0.02 0.03 —

250 0.02 400 0.03 0.06 —300 0.03 500 0.04 0.08 —350 0.04 600 0.06 0.12 —

0604/ 200 0.05 11 400 0.03 0.06 —0606/ 300 0.1 600 0.06 0.12 —0611 400 0.19 800 0.1 0.19 —

450 0.23 1000 0.14 0.29 —550 0.34 1100 0.17 0.34 —

0806/ 300 0.03 18 700 0.04 0.09 —0811/ 400 0.05 1000 0.08 0.16 —0818 550 0.09 1200 0.11 0.23 —

800 0.11 1600 0.19 0.38 —1000 0.17 2000 0.28 0.56 —

1011/ 600 0.03 21 1000 0.08 0.16 —1018/ 800 0.06 1400 0.15 0.3 —1021 1200 0.13 1600 0.19 0.38 —

1400 0.18 1800 0.23 0.47 —1600 0.24 2000 0.28 0.56 —

1218/ 800 0.02 24 1000 0.03 0.06 —1221/ 1200 0.05 1400 0.05 0.11 —1224/ 1700 0.09 1800 0.08 0.17 —1230 2000 0.13 2200 0.12 0.24 —

2300 0.15 2400 0.14 0.28 —1421/ 1100 0.04 30 1500 0.03 0.06 —1424/ 1500 0.05 1700 0.04 0.08 —1430/ 2000 0.13 2100 0.06 0.12 —1440 2700 0.13 2500 0.08 0.16 —

3100 0.20 2900 0.10 0.21 —1630/ 1500 0.02 40 1700 0.04 0.08 —1640/ 1900 0.04 2100 0.06 0.12 —1644 2700 0.08 2500 0.08 0.16 —

3600 0.21 2900 0.10 0.21 —4100 0.28 3700 0.16 0.32 —

1844 2100 0.1 44 2400 0.06 0.12 —2600 0.15 2800 0.08 0.16 —3600 0.3 3600 0.13 0.26 —4100 0.44 4400 0.18 0.37 —4600 0.56 4600 0.20 0.40 —


SeriesFan-Powered



Price Air Pressure Drop—in. wg (I-P)Fan/Inlet Airflow FDC FDC FDC Elec.

Size Cfm Cooling 1-row coil 2-row coil Heat

2006 250 0.10 0.04 0.08 —300 0.14 0.05 0.10 —350 0.19 0.07 0.13 —400 0.24 0.08 0.17 —

2008 400 0.05 0.08 0.17 —500 0.07 0.12 0.25 —600 0.10 0.17 0.34 —700 0.14 — — —

3008 550 0.02 0.08 0.15 —600 0.03 0.09 0.17 —650 0.03 0.10 0.20 —700 0.04 0.11 0.23 —750 0.04 0.13 0.25 —

3010 800 0.05 0.14 0.28 —900 0.06 0.17 0.35 —1000 0.07 0.21 0.42 —1100 0.09 — — —1200 0.10 — — —

4010 800 0.06 0.08 0.17 —950 0.08 0.11 0.22 —1100 0.11 0.14 0.29 —1250 0.14 0.18 0.35 —

4012 1000 0.03 0.12 0.24 —1250 0.05 0.18 0.35 —1500 0.08 0.24 0.49 —1750 0.11 — — —2000 0.16 — — —

5012 1500 0.07 0.13 0.26 —1700 0.09 0.16 0.32 —1900 0.11 0.19 0.38 —2100 0.13 0.23 0.45 —

5014 1600 0.04 0.14 0.29 —1800 0.06 0.17 0.35 —2000 0.07 0.21 0.42 —2200 0.09 — — —2400 0.10 — — —

6014 2000 0.05 0.15 0.31 —2200 0.06 0.18 0.36 —2400 0.07 0.21 0.42 —2600 0.08 0.24 0.48 —2800 0.09 — — —

6016 2400 0.04 0.21 0.42 —2600 0.05 0.24 0.48 —2800 0.06 — — —3000 0.08 — — —3200 0.10 — — —

7016 2800 0.02 0.12 0.25 —3100 0.03 0.15 0.30 —3400 0.04 0.17 0.35 —3700 0.04 — — —4000 0.05 — — —

SeriesFan-Powered


Nailor Air Pressure Drop—in. wg (I-P)Inlet/Fan Airflow 35S Fan Airflow 35S 35S Elec.

Size Cfm Cooling Size Cfm 1-row coil 2-row coil Heat

0802 300 0.05 2 200 0.01 0.02 —450 0.05 300 0.19 0.04 —550 0.05 500 0.045 0.098 —675 0.05 700 0.078 0.18 —

0803 450 0.05 3 400 0.02 0.05 —600 0.05 600 0.042 0.09 —700 0.05 800 0.07 0.16 —— — 1000 0.12 0.25 —

1003 450 0.05 4 700 0.028 0.06 —700 0.05 1000 0.053 0.12 —900 0.05 1200 0.061 0.15 —1100 0.05 1400 0.085 0.2 —

1004 850 0.05 5 850 0.038 0.85 —1000 0.05 1100 0.05 0.14 —1100 0.05 1300 0.08 0.17 —— — 1600 0.11 0.25 —

1204 850 0.05 6 1300 0.048 0.1 —1100 0.05 1500 0.055 0.13 —1300 0.05 1800 0.085 0.18 —1500 0.05 2100 0.12 0.25 —

1205 1050 0.05 7 1600 0.028 0.065 —1200 0.05 2000 0.48 0.11 —1400 0.05 2500 0.068 0.15 —1600 0.05 3000 0.1 0.21 —

1405 1050 0.051400 0.051700 0.051925 0.05

1406 1100 0.051400 0.052000 0.052300 0.05

1607 1500 0.042000 0.073000 0.173500 0.24


SeriesFan-Powered



Trane—Fan Sizes 06, 07 (I-P)Water

Pressure Airflow (Cfm)Rows Gpm Drop (ft) 1200 1400 1600 1800 2000 2200 2400 2600 2800 2900

1-Row 2 1.39 42.03 44.22 46.05 47.62 48.98 50.18 51.24 52.2 53.07 53.48Capacity 3 2.86 46.71 49.39 51.83 53.94 55.8 57.46 58.94 60.29 61.52 62.09

MBH 4 4.8 49.64 52.68 55.33 57.66 59.83 61.79 63.56 65.17 66.65 67.355 7.18 51.57 54.87 57.76 60.32 62.62 64.69 66.63 68.44 70.1 70.886 10 52.93 56.43 59.5 62.23 64.68 66.91 68.95 70.82 72.57 73.427 13.23 53.95 57.6 60.81 63.67 66.24 68.59 70.73 72.71 74.55 75.42

2-Row 3 5.34 68.74 73.32 77.17 80.48 83.39 86 88.38 – – –Capacity 4 8.88 73.59 79.09 83.78 87.87 91.52 94.83 97.88 100.7 – –

MBH 5 13.21 76.71 82.84 88.12 92.77 96.96 100.8 104.3 107.7 – –6 18.3 78.86 85.45 91.18 96.25 100.9 105.1 109 112.7 – –7 24.12 80.45 87.39 93.44 98.85 103.8 108.3 112.5 116.5 – –

Trane—Fan Sizes 03, 04, 05 (I-P)Water

Pressure Airflow (Cfm)Rows Gpm Drop (ft) 600 800 1000 1200 1400 1600 1800 1900

1-Row 1 0.37 22.25 24.3 25.76 26.87 27.76 28.49 29.1 29.37Capacity 2 1.25 27.22 30.38 32.88 34.94 36.64 38.08 39.31 39.87

MBH 3 2.6 29.44 33.22 36.19 38.62 40.7 42.55 44.16 44.894 4.37 30.69 34.83 38.13 40.87 43.2 45.22 47.01 47.845 6.57 31.49 35.88 39.4 42.34 44.86 47.05 49 49.896 9.17 32.05 36.62 40.3 43.39 46.04 48.36 50.42 51.377 12.17 32.46 37.16 40.97 44.17 46.92 49.34 51.49 52.48

2-Row 2 2.25 41.16 47.73 52.42 55.99 58.85 – – –Capacity 3 4.61 44.52 52.72 58.88 63.74 67.77 71.22 74.26 –

MBH 4 7.68 46.3 55.45 62.5 68.2 72.99 77.16 80.88 –5 11.45 47.4 57.16 64.81 71.07 76.4 81.07 85.28 –6 15.87 48.14 58.33 66.41 73.08 78.8 83.85 88.42 –7 20.95 48.68 59.19 67.58 74.56 80.58 85.92 90.77 –

Trane—Fan Sizes 01, 02 (I-P)Water


1-Row 0.5 0.16 10.06 10.53 10.92 11.24 11.52 11.77 11.99 12.18 12.35Capacity 1 0.54 12.56 13.3 13.94 14.5 15.02 15.48 15.9 16.28 16.63

MBH 2 1.86 14.29 15.27 16.13 16.9 17.6 18.23 18.8 19.34 19.833 3.87 14.98 16.07 17.03 17.9 18.68 19.4 20.06 20.67 21.244 6.54 15.36 16.51 17.53 18.45 19.28 20.05 20.76 21.41 22.025 9.83 15.6 16.79 17.84 18.8 19.67 20.47 21.2 21.89 22.53

2-Row 1 1.02 19.08 20.66 21.96 23.07 24.02 24.85 25.59 26.25 –Capacity 2 3.45 21.66 23.85 25.73 27.38 28.84 30.16 31.35 32.44 33.45

MBH 3 7.11 22.62 25.06 27.19 29.08 30.78 32.32 33.72 35.03 36.254 11.89 23.12 25.69 27.96 29.99 31.82 33.49 35.02 36.45 37.795 17.77 23.43 26.09 28.45 30.56 32.47 34.22 35.84 37.35 38.77

SeriesFan-Powered


Titus—Fan Size 2 (I-P)Water


1-Row 1.0 .30 12.9 14.7 16.0 17.1 18.0 18.6 19.6 20.4 21.2Capacity 2.0 .90 14.1 16.4 18.1 19.5 20.7 21.6 22.9 24.1 25.2

MBH 4.0 3.2 14.9 17.4 19.4 21.0 22.4 23.5 25.1 26.6 28.06.0 6.5 15.1 17.8 19.9 21.6 23.1 24.3 26.0 27.6 29.1

2-Row 1.0 .60 18.0 21.8 24.8 27.3 29.3 31.0 32.5 33.8 —Capacity 2.0 2.0 19.6 24.4 28.4 32.0 35.0 37.7 40.2 42.4 —

MBH 4.0 6.8 20.4 25.8 30.6 34.8 38.6 42.0 45.2 48.1 —6.0 13.9 20.7 26.4 31.3 35.8 39.9 43.6 47.1 50.3 —



1-Row 1.0 .30 18.0 19.0 20.2 21.2 22.1 22.9 23.7 24.3 25.0Capacity 2.0 .90 20.7 22.1 23.7 25.2 26.6 27.8 28.9 30.0 30.9

MBH 4.0 3.2 22.4 24.1 26.1 28.0 29.7 31.2 32.7 34.0 35.36.0 6.5 23.1 24.9 27.1 29.1 30.9 32.6 34.2 35.7 37.1

2-Row 1.0 .60 29.3 31.6 33.4 35.0 36.3 37.5 38.5 39.4 —Capacity 2.0 2.0 35.0 38.6 41.7 44.4 46..8 48.9 50.8 52.6 —

MBH 4.0 6.8 38.6 43.1 47.1 50.8 54.1 57.1 59.9 62.5 —6.0 13.9 39.9 44.8 49.2 53.3 57.0 60.4 63.6 66.6 —



1-Row 1.0 .30 21.2 21.9 22.6 23.2 23.8 24.3 24.8 25.3 25.7Capacity 2.0 .90 25.2 26.3 27.3 28.3 29.1 30.0 30.7 31.5 32.2

MBH 4.0 3.2 28.0 29.3 30.6 31.8 32.9 34.0 35.0 36.0 36.96.0 6.5 29.1 30.5 31.9 33.2 34.5 35.7 36.8 37.9 38.9

2-Row 1.0 .60 35.0 36.1 37.0 37.9 38.7 39.4 40.0 — —Capacity 2.0 2.0 44.4 46.3 48.1 49.7 51.2 52.6 53.9 — —

MBH 4.0 6.8 50.8 53.4 55.9 58.3 60.4 62.5 64.4 — —6.0 13.9 53.3 56.3 59.1 61.7 64.2 66.6 68.8 — —



1-Row 1.0 .40 26.6 28.0 28.8 30.2 31.4 32.4 33.4 34.2 35.0Capacity 2.0 1.3 31.8 33.8 35.2 37.4 39.3 41.1 42.7 44.1 45.5

MBH 4.0 4.3 35.1 37.7 39.5 42.3 44.9 47.2 49.4 51.4 53.36.0 8.8 36.4 39.2 41.2 44.2 47.1 49.7 52.2 54.4 56.6

2-Row 1.0 .80 39.6 42.1 44.0 45.6 46.9 48.0 49.0 49.8 —Capacity 2.0 2.6 50.0 54.8 58.8 62.3 65.4 68.1 70.5 72.6 —

MBH 4.0 9.0 56.4 63.1 68.9 74.2 78.9 83.2 87.2 90.8 —5.0 13.4 57.9 64.9 71.2 76.9 82.1 86.8 91.2 95.3 —


SeriesFan-Powered





1-Row 1.0 .40 31.7 32.7 33.6 34.4 35.2 35.8 36.5 37.0 37.6Capacity 2.0 1.3 39.8 41.5 43.1 44.5 45.9 47.1 48.3 49.3 50.4

MBH 4.0 4.3 45.5 47.9 50.0 52.0 53.9 55.6 57.3 58.9 60.36.0 8.8 47.9 50.4 52.8 55.1 57.2 59.2 61.1 62.9 64.6

2-Row 1.0 .80 47.3 48.3 49.2 50.0 50.6 51.2 51.7 — —Capacity 2.0 2.6 66.2 68.8 71.1 73.2 75.0 76.7 78.3 — —

MBH 4.0 9.0 80.2 84.4 88.3 91.8 95.1 98.2 101.0 — —5.0 13.4 83.5 88.1 92.4 96.4 100.1 103.6 106.8 — —



1-Row 1.0 .40 33.1 34.0 34.9 35.6 36.3 36.9 37.5 38.0 38.5Capacity 2.0 1.3 42.2 43.8 45.3 46.7 47.9 49.1 50.2 51.2 52.2

MBH 4.0 4.3 48.8 51.0 53.1 55.0 56.8 58.5 60.1 61.7 63.16.0 8.8 51.5 54.0 56.3 58.5 60.6 62.5 64.4 66.1 67.8

2-Row 1.0 .80 48.7 49.6 50.4 51.0 51.6 52.1 52.5 52.9 —Capacity 2.0 2.6 69.8 72.2 74.3 76.1 77.9 79.4 80.8 82.1 —

MBH 4.0 9.0 86.1 90.1 93.7 97.1 100.2 103.1 105.9 108.4 —5.0 13.4 90.0 94.5 98.6 102.4 105.9 109.2 112.4 115.3 —

SeriesFan-Powered


ETI—Fan Size 4 (I-P)Water

Pressure Airflow (Cfm)Rows Gpm Drop (ft) 100 150 200 250 300 350 400

1-Row 0.5 0.3 5.4 6.6 7.5 8.2 8.8 9.3 9.7Capacity 1 1.0 6.0 7.5 8.7 9.7 10.6 11.3 11.9

MBH 2 3.5 6.3 8.1 9.5 10.7 11.7 12.7 13.54 12.7 6.5 8.4 10.0 11.3 12.5 13.5 14.55 — — — — — — — —

2-Row 0.5 0.1 7.7 9.5 10.7 11.7 12.5 13.1 13.6Capacity 1 0.3 8.6 11.1 13.0 14.6 15.9 17.0 17.9

MBH 2 1.0 9.2 12.1 14.6 16.6 18.4 19.9 21.34 3.5 9.5 12.7 15.5 17.8 19.9 21.8 23.55 5.3 9.6 12.9 15.7 18.1 20.3 22.2 24.0

ETI—Fan Sizes 6, 11 (I-P)Water


1-Row 0.5 0.4 9.2 10.9 13.1 13.8 14.9 15.4 15.8 16.1Capacity 1.0 1.4 10.6 13.1 14.9 17.7 19.7 20.5 21.2 21.9

MBH 2.0 4.9 11.6 14.5 16.9 20.6 23.3 24.5 25.6 26.64.0 17.4 12.1 15.4 18.1 22.4 25.8 27.2 28.6 29.85.0 — — — — — — — — —

2-Row 0.5 0.1 12.8 15.1 17.6 18.4 19.5 19.9 20.3 20.6Capacity 1.0 0.4 15.4 19.2 24.0 25.7 28.3 29.3 30.2 31.0

MBH 2.0 1.2 17.0 22.0 29.1 31.8 36.1 37.9 39.5 40.94.0 4.4 17.9 23.7 32.4 35.9 41.7 44.2 46.5 48.55.0 6.6 18.1 24.0 33.1 36.8 43.0 45.7 48.1 50.4



1-Row 0.5 0.4 16.3 16.8 17.8 18.5 19.1 19.5 19.9 20.3Capacity 1.0 1.4 21.4 22.5 24.3 25.8 27.0 28.0 28.9 29.7

MBH 2.0 4.9 25.3 26.9 29.6 31.9 33.8 35.5 37.0 38.44.0 17.4 27.8 29.8 33.1 36.1 38.6 40.9 42.9 44.85.0 — — — — — — — — —

2-Row 0.5 0.1 21.0 21.5 22.3 22.9 23.4 23.7 24.0 24.2Capacity 1.0 0.4 30.5 31.8 34.0 35.7 37.0 38.0 38.9 39.7

MBH 2.0 1.4 38.5 40.9 44.9 48.2 50.9 53.2 55.2 57.04.0 4.9 43.9 47.2 53.0 57.8 62.0 65.7 68.9 71.95.0 7.4 45.2 48.7 54.9 60.1 64.7 68.8 72.4 75.7



1-Row 0.5 0.6 21.1 21.9 22.5 23.0 23.4 23.8 24.0 24.3Capacity 1.0 2.0 30.0 31.8 33.4 34.6 35.7 36.7 37.5 38.3

MBH 2.0 7.1 37.3 40.3 43.0 45.2 47.3 49.1 50.7 52.24.0 24.5 42.2 46.3 49.8 53.0 55.8 58.4 60.8 63.15.0 — — — — — — — — —

2-Row 0.5 0.2 25.3 25.8 26.2 26.4 26.6 26.8 27.0 27.1Capacity 1.0 0.6 40.3 42.2 43.7 44.9 45.9 46.7 47.0 47.9

MBH 2.0 2.0 54.7 58.9 62.4 65.4 67.9 70.1 72.0 73.84.0 7.0 65.0 71.5 77.2 82.2 86.6 90.6 94.2 97.55.0 10.5 67.3 74.5 80.8 86.3 91.3 95.9 100.0 103.8


SeriesFan-Powered





1-Row 0.5 0.8 26.2 26.5 26.8 27.0 27.1 27.3 27.3Capacity 1.0 2.7 43.4 44.7 45.7 46.6 47.4 48.0 48.3

MBH 2.0 9.3 61.4 64.5 67.1 69.4 71.3 73.1 73.94.0 31.8 75.9 80.9 85.3 89.2 92.7 95.9 97.45.0 — — — — — — — —

2-Row 0.5 0.1 28.0 28.1 28.1 28.2 28.2 28.3 28.3Capacity 1.0 0.8 51.8 52.6 53.2 53.7 54.0 54.3 54.4

MBH 2.0 2.7 83.6 86.7 89.2 91.3 93.0 94.4 95.14.0 9.3 113.8 120.8 126.7 131.8 136.3 140.3 142.15.0 13.9 121.8 130.1 137.2 143.5 149.0 153.9 156.2



1-Row 0.5 0.7 24.5 25.2 25.5 25.8 26.0 26.3 26.5 26.7Capacity 1.0 2.5 37.8 40.2 41.1 42.0 42.7 44.0 45.0 45.8

MBH 2.0 8.7 50.2 54.9 56.8 58.6 60.3 63.1 65.6 67.74.0 29.9 59.2 66.1 69.1 71.8 74.4 79.0 83.1 86.75.0 — — — — — — — — —

2-Row 0.5 0.1 27.3 27.6 27.7 27.8 27.9 28.0 28.1 28.1Capacity 1.0 0.7 47.8 49.6 50.3 50.9 51.4 52.1 52.7 53.2

MBH 2.0 2.6 70.9 76.5 78.8 80.7 82.5 85.4 87.8 89.74.0 8.8 89.6 100.1 104.5 108.5 112.2 118.6 124.2 129.05.0 13.0 94.2 106.0 111.1 115.8 120.1 127.8 134.4 140.2

SeriesFan-Powered


Price—Fan Size 20 (I-P)Water


1-Row 0.5 .18 7.3 7.8 8.4 8.9 9.4 9.9 10.4 10.9Capacity 1.0 .45 8.4 9.1 9.8 10.4 11.0 11.6 12.2 12.8

MBH 2.0 1.54 9.5 10.3 11.1 11.8 12.5 13.2 13.9 14.63.0 3.17 10.1 11.0 11.8 12.6 13.4 14.1 14.9 15.6

2-Row 1.0 .45 13.8 14.6 15.3 15.9 16.6 17.2 17.8 18.5Capacity 2.0 1.54 16.9 17.8 18.7 19.6 20.4 21.2 22.0 22.8

MBH 4.0 5.29 20.2 21.4 22.5 23.6 24.6 25.6 26.5 27.56.0 10.88 22.3 23.6 24.9 26.1 27.2 28.3 29.4 30.4



1-Row 1.0 .22 13.8 14.4 14.9 15.5 16.0 16.5 17.6 18.7Capacity 2.0 .82 15.9 16.6 17.2 17.9 18.5 19.2 20.4 21.7

MBH 4.0 3.15 17.9 18.7 19.4 20.2 20.9 21.6 23.1 24.56.0 6.91 19.0 19.8 20.7 21.5 22.2 23.0 24.5 26.0

2-Row 1.5 .42 23.0 23.7 24.3 25.0 25.6 26.2 27.5 28.7Capacity 3.0 1.43 28.3 29.1 29.9 30.8 31.6 32.3 33.9 35.4

MBH 6.0 4.90 34.0 35.1 36.1 37.1 38.0 39.0 40.9 42.79.0 10.08 37.6 38.8 39.9 41.0 42.1 43.2 45.3 47.3



1-Row 1.0 .28 17.8 18.8 19.8 20.8 21.7 22.7 23.7 24.7Capacity 2.0 1.09 20.8 22.0 23.2 24.4 25.6 26.7 27.9 29.0

MBH 4.0 4.15 23.7 25.1 26.5 27.8 29.2 30.5 31.8 33.16.0 9.10 25.3 26.8 28.3 29.7 31.2 32.6 34.0 35.4

2-Row 1.5 .55 29.7 30.9 32.1 33.2 34.3 35.5 36.6 37.8Capacity 3.0 1.88 36.9 38.5 40.0 41.4 42.8 44.3 45.7 47.1

MBH 6.0 6.45 44.8 46.7 48.6 50.4 52.2 53.9 55.6 57.49.0 13.27 49.8 51.9 54.0 56.0 58.8 59.9 61.9 63.8



1-Row 1.5 .26 29.5 30.0 30.5 31.4 32.4 33.4 34.4 35.4Capacity 3.0 .99 34.6 35.2 35.8 36.9 38.1 39.3 40.4 41.6

MBH 6.0 3.78 39.4 40.1 40.8 42.1 43.4 44.8 46.1 47.49.0 8.28 42.1 42.8 43.5 45.0 46.4 47.8 49.3 50.7

2-Row 2.0 .56 46.1 46.6 47.2 48.3 49.4 50.5 51.6 52.7Capacity 4.0 1.93 57.6 58.3 59.1 60.5 61.9 63.3 64.7 66.1

MBH 8.0 6.60 70.3 71.2 72.1 73.8 75.5 77.2 78.9 80.612.0 13.58 78.2 79.2 80.2 82.2 84.1 86.0 87.9 89.8


SeriesFan-Powered





1-Row 1.5 .29 35.3 36.2 37.2 38.1 39.1 40.0 40.9 41.9Capacity 3.0 1.13 41.9 43.0 44.1 45.2 46.3 47.5 48.6 49.7

MBH 6.0 4.31 48.1 49.4 50.6 51.9 53.2 54.5 55.7 57.09.0 9.45 51.5 52.9 54.3 55.7 57.0 58.4 59.8 61.1

2-Row 3.0 .43 61.0 62.2 63.4 64.6 65.8 66.9 68.1 69.3Capacity 6.0 1.47 75.7 77.2 78.7 80.2 81.6 83.1 84.6 86.0

MBH 12.0 5.02 91.8 93.6 95.4 97.2 99.0 100.8 102.5 104.318.0 10.33 101.9 103.9 105.9 107.9 109.9 111.8 113.8 115.7



1-Row 1.5 .42 45.1 45.4 45.8 46.6 47.4 48.2 48.9 49.7Capacity 3.0 1.61 55.0 55.5 56.0 57.0 57.9 58.9 59.9 60.8

MBH 6.0 6.17 64.4 65.0 65.6 66.7 67.9 69.0 70.2 71.39.0 13.53 69.6 70.3 70.9 72.2 73.4 74.7 75.9 77.2

2-Row 3.0 .61 81.7 82.2 82.8 83.8 84.8 85.8 86.9 87.9Capacity 6.0 2.10 103.4 104.1 104.8 106.1 107.4 108.8 110.1 111.4

MBH 12.0 7.20 127.2 128.0 128.9 130.5 132.2 133.9 135.5 137.118.0 14.8 142.1 143.0 144.0 145.9 147.7 149.6 151.4 153.3

SeriesFan-Powered


Nailor—Fan Size 2 (I-P)Water

Pressure Airflow (Cfm)Rows Gpm Drop (ft) 200 300 400 500 600 700

1-Row 0.5 <1.0 8.5 10.0 11.2 12.0 12.6 13.1Capacity 1 1.0 8.7 11.9 13.5 14.9 15.8 16.8

MBH 2 3.7 10.6 13.2 15.2 16.8 18.4 19.54 >10.0 11.0 14.0 16.1 18.1 19.7 21.25 >10.0 11.1 14.1 16.3 18.5 20.1 21.5

2-Row 0.5 <1.0 11.3 13.5 15.0 16.0 17.0 17.5Capacity 1 0.27 13.8 17.4 19.8 21.6 23.2 24.9

MBH 2 1.0 15.4 19.8 23.4 26.4 28.8 31.04 3.7 16.2 21.4 25.9 29.3 32.5 35.25 5.5 16.4 21.8 26.3 30.0 33.5 36.4



1-Row 0.5 <1.2 — 12.9 14.2 15.1 15.9 16.4Capacity 1 1.2 12.9 16.1 18.3 19.9 21.4 22.2

MBH 2 4.4 14.2 18.3 21.3 23.5 25.5 27.04 >10 15.0 19.8 23.1 26.0 28.3 30.45 >10 15.5 20.0 23.6 26.5 29.0 31.1

2-Row 0.5 <.3 14.1 16.9 18.5 19.4 20.2 21.0Capacity 1 0.3 18.0 23.1 26.2 28.9 30.4 31.9

MBH 2 1.2 20.9 28.2 33.1 37.1 40.2 41.94 4.4 22.5 31.2 37.9 43.3 47.8 51.55 7.0 23.0 32.0 39.0 44.8 49.4 53.5

Nailor—Fan Sizes 4, 5 (I-P)Water


1-Row 0.5 <.19 — 15.7 16.3 17.0 17.5 18.0 18.3Capacity 1 0.19 19.1 21.4 23.8 24.0 25.2 26.0 26.8

MBH 2 0.73 22.7 25.9 28.2 30.3 31.8 33.5 34.84 2.8 25.0 28.9 32.0 34.8 37.0 39.0 40.95 4.2 25.6 29.6 33.0 35.9 38.3 40.4 42.2

2-Row 0.5 <.15 19.0 20.2 21.0 21.9 22.1 22.5 23.0Capacity 1 0.15 27.0 30.0 32.2 34.0 35.2 36.1 37.1

MBH 2 0.58 34.0 39.1 43.2 46.4 47.8 51.4 53.14 2.2 39.0 45.9 51.6 56.4 60.8 64.5 67.95 3.5 40.1 47.6 53.9 59.1 63.7 68.0 71.4


SeriesFan-Powered




1-Row 1 0.13 31.2 32.1 34.5 35.9 36.3 37.3 37.8 38.0Capacity 2 0.48 41.2 44.8 47.1 49.0 51.2 52.7 53.9 55.5

MBH 4 1.9 48.2 53.1 57.5 61.2 63.8 66.3 68.4 71.25 2.9 51.2 56.0 60.1 63.9 67.5 70.9 73.1 75.7

7.5 6.0 53.5 58.4 63.8 68.0 72.5 76.1 78.3 81.12-Row 1 0.1 40.0 42.1 43.2 44.2 45.0 45.8 46.2 47.1

Capacity 2 0.28 57.6 62.4 66.1 68.6 71.1 72.7 74.8 76.2MBH 4 1.1 72.5 80.1 87.1 92.5 97.4 101.2 105.0 108.2

5 1.7 77.1 85.8 92.7 99.2 104.7 109.8 113.78 117.67.5 3.5 82.5 92.6 101.9 108.8 116.2 123.0 128.8 133.7

Note: Size 2 and 3, 1-row coils are single-circuit. Size 4–7, 1-row coils are multi-circuit. All 2-row coils are multi-circuit.



1-Row 1 25.9 27.5 28.9 29.8 30.5 31.3 31.9Capacity 2 32.4 34.8 36.9 38.6 40.2 41.6 42.8

MBH 4 36.8 40.0 42.9 45.4 47.6 49.6 51.35 37.9 41.3 44.5 45.4 49.4 51.7 53.6

7.5 39.4 43.1 46.8 49.2 52.1 54.6 56.82-Row 1 0.18 35.2 37.4 38.7 39.8 41.0 32.0 32.5

Capacity 2 0.7 37.5 51.3 54.8 57.0 59.5 61.9 63.0MBH 4 2.7 57.4 63.0 67.9 72.5 36.2 79.9 82.6

5 4.0 59.9 66.2 71.5 76.2 80.9 84.9 88.07.5 8.5 63.6 70.2 76.3 82.4 87.5 92.0 96.3


SeriesFan-Powered



Fan Size HP 120V 208V 277V 347V

01 1/8 1.6 — 0.7 0.702 1/8 1.6 — 0.7 0.703 1/3 5.4 — 1.8 1.504 1/3 5.4 — 1.8 1.505 1/2 7.6 — 2.6 2.106 1/2 — 6.3 3.8 3.807 1 — 6.9 4.7 3.6

Trane VSEF Electric Coil kW Guidelines—Minimum to MaximumFan Single-Phase Voltage Three-Phase VoltageSize Stages 208V/240V 277V 347V 480V 208V 480V 575V

01 1 0.5–5.5 1.0–5.5 1.0–5.5 1.0–5.5 0.5–5.5 1.0–5.5 1.5–5.5(280–500 cfm) 2 0.5–5.5 1.0–5.5 1.0–5.0 2.0–4.5 1.5–4.0 — —

3 — — — — — — —02 1 0.5–7.0 1.0–7.0 1.0–7.0 1.0–7.0 0.5–7.0 1.0–7.0 1.5–7.0

(375–700 cfm) 2 0.5–7.0 1.0–7.0 1.0–7.0 1.5–5.5 1.0–7.0 — —3 — — — — — — —

03 1 0.5–8.0 1.0–11.0 1.0–11.0 1.0–11.0 0.5–11.0 1.0–11.0 1.5–9.0(540–1130 cfm) 2 0.5–8.0 1.0–11.0 1.0–11.0 1.5–11.0 1.0–9.0 — —

3 1.0–8.0 1.0–11.0 1.5–9.0 2.5–8.0 1.5–9.0 — —04 1 0.5–8.0 1.0–12.0 1.0–12.0 1.0–11.0 0.5–12.0 1.0–12.0 1.5–9.0

(690–1260 cfm) 2 0.5–8.0 1.0–12.0 1.0–12.0 1.5–11.0 1.0–9.0 — —3 1.0–8.0 1.0–12.0 1.5–9.0 2.5–8.0 1.5–9.0 — —

05 1 0.5–8.0 1.0–12.0 1.0–15.0 1.0–16.0 0.5–14.0 1.0–16.0 1.5–16.0(950–1950 cfm) 2 0.5–8.0 1.0–12.0 1.0–15.0 1.0–16.0 1.0–14.0 3.0–16.0 4.5–10.0

3 1.0–8.0 1.0–12.0 1.5–15.0 1.5–16.0 1.5–14.0 4.5–12.0 —06 1 0.5–6.0 1.0–12.0 1.0–15.0 1.0–20.0 0.5–12.0 1.0–22.0 1.5–22.0

(1200–2400 cfm) 2 0.5–6.0 1.0–12.0 1.0–15.0 1.0–20.0 1.0–12.0 2.0–22.0 3.0–22.03 1.0–6.0 1.0–12.0 1.5–15.0 1.5–20.0 1.5–12.0 3.0–20.0 5.0–18.0

07 1 0.5–8.0 1.0–11.0 1.0–15.0 1.0–20.0 0.5–14.0 1.0–24.0 1.5–24.0(1200–3000 cfm) 2 0.5–8.0 1.0–11.0 1.0–15.0 1.0–20.0 1.0–14.0 2.0–24.0 3.0–24.0

3 1.0–8.0 1.0–11.0 1.5–15.0 1.5–20.0 1.5–14.0 3.0–20.0 5.0–20.0


SeriesFan-Powered



TQS Titus Electric Coil kW Guidelines—Minimum to MaximumFan Single-Phase Voltage Three-Phase VoltageSize Stages 208V/240V 277V 347V 480V 208V 480V 575V

2 1 0.5–8.0 0.5–8.0 — — 1.5–8.5 1.5–8.5 —(320–750 cfm) 2 1.0–8.0 1.0–8.0 — — 1.5–8.5 1.5–8.5 —

3 1.5–8.0 1.5–8.0 — — 1.5–8.5 1.5–8.5 —3 1 0.5–8.0 0.5–11.5 — — 1.5–14.0 1.5–14.0 —

(600–1440 cfm) 2 1.0–8.0 1.0–11.5 — — 1.5–14.0 1.5–14.0 —3 1.5–8.0 1.5–11.5 — — 1.5–14.0 1.5–14.0 —

4 1 0.5–8.0 0.5–11.5 — — 1.5–14.0 1.5–16.0 —(820–1550 cfm) 2 1.0–8.0 1.0–11.5 — — 1.5–14.0 1.5–16.0 —

3 1.5–8.0 1.5–11.5 — — 1.5–14.0 1.5–16.0 —5 1 0.5–8.0 0.5–11.5 — — 1.5–14.0 1.5–19.0 —

(900–1880 cfm) 2 1.0–8.0 1.0–11.5 — — 1.5–14.0 1.5–19.0 —3 1.5–8.0 1.5–11.5 — — 1.5–14.0 1.5–19.0 —

6 1 0.5–8.0 0.5–11.5 — — 1.5–14.0 1.5–26 —(1400–2350 cfm) 2 1.0–8.0 1.0–11.5 — — 1.5–14.0 1.5–26 —

3 1.5–8.0 1.5–11.5 — — 1.5–14.0 1.5–26 —7 1 0.5–8.0 0.5–11.5 — — 1.5–14.0 1.5–30 —

(1320–3100 cfm) 2 1.0–8.0 1.0–11.5 — — 1.5–14.0 1.5–30 —3 1.5–8.0 1.5–11.5 — — 1.5–14.0 1.5–30 —

Note: Maximum 2 steps electric heat using analog controls.


Fan Size HP 120V 208/240V 277V

2 1/6 4.0 1.8 1.33 1/4 7.0 3.0 2.44 1/3 9.8 4.1 2.95 1/3 10.0 4.3 3.36 3/4 13.4 7.2 5.47 1 N/A 9.0 6.5

SeriesFan-Powered


CFR ETI Electric Coil kW Guidelines—Minimum to MaximumFan Single-Phase Voltage Three-Phase VoltageSize Stages 208V/240V 277V 347V 480V 208V 480V 575V

4 1 5.0 5.0 5.0 5.0 5.0 5.0 5.0(230–415 cfm) 2 5.0 5.0 5.0 5.0 5.0 5.0 5.0

3 5.0 5.0 5.0 5.0 5.0 5.0 5.06 1 10 10 10 10 10 10 10

(520–625 cfm) 2 10 10 10 10 10 10 103 10 10 10 10 10 10 10

11 1 17 17 17 17 17 17 17(780–1270 cfm) 2 17 17 17 17 17 17 17

3 17 17 17 17 17 17 1718 1 25 25 25 25 25 25 25

(1675–2000 cfm) 2 25 25 25 25 25 25 253 25 25 25 25 25 25 25

21 1 30 30 30 30 30 30 30(1700–2275 cfm) 2 30 30 30 30 30 30 30

3 30 30 30 30 30 30 3024 1 25 25 25 25 25 25 25

(1990–2575 cfm) 2 25 25 25 25 25 25 253 25 25 25 25 25 25 25

30 1 30 30 30 30 30 30 30(3050–3350 cfm) 2 30 30 30 30 30 30 30

3 30 30 30 30 30 30 3040 1 35 35 35 35 35 35 35

(3125–4200 cfm) 2 35 35 35 35 35 35 353 35 35 35 35 35 35 35

44 1 40 40 40 40 40 40 40(3840–4700 cfm) 2 40 40 40 40 40 40 40

3 40 40 40 40 40 40 40Notes:1. Maximum kW determined by dividing the actual fan capacity (cfm) by 70 (i.e. maximum 70 Cfm per KW= 45° rise)2. Cfms are at 0.25" w.c.3. Available kW increments are as follows:� .5 to 5.0 kW—.25 kW�5.0 to 10.0 kW—.5 kW�Above 10 kW—1.0 kW)

Max FLAFan Size HP 120V 277V

4 1/13 1.07 0.56 1/6 2.6 0.911 1/4 4.9 1.918 1/2 8.8 3.621 3/4 9.7 3.824 1 12.3 4.530 2@1/2 17.6 7.240 2@3/4 22.8 8.244 2@1 24.6 9



SeriesFan-Powered



F*C Price Electric Coil kW Guidelines—Minimum to MaximumFan Single-Phase Voltage Three-Phase VoltageSize Stages 208V/240V 277V 347V 480V 208V 480V 575/600V

20 1 9.0/10 10 — — 1.0–10 1.0–10 1.0–10(250–680 cfm) 2 9.0/10 10 — — 3.5–10 3.5–10 3.5–10

3 9.0/10 10 — — 3.5–10 3.5–10 3.5–1030 1 8.5/9.5 12.5 — — 1.0–14.5 1.0–17.0 1.0–17.0

(550–1200 cfm) 2 8.5/9.5 12.5 — — 3.5–14.5 3.5–17.0 3.6–17.13 8.5/9.5 12.5 — — 3.5–14.5 3.5–17.0 3.6–17.1

40 1 7.5/8.5 12.5 — — 1.0–13.0 1.0–28.5 1.0–28.5(800–1980 cfm) 2 7.5/8.5 12.5 — — 3.5–13.0 3.5–28.5 3.5–28.5

3 7.5/8.5 12.5 — — 3.5–13.0 3.5–28.5 3.5–28.550 1 7.0/8.5 11.5 — — 1.0–12.5 1.0–34.0 1.0–34.0

(1500–2400 cfm) 2 7.0/8.5 11.5 — — 3.5–12.5 3.5–34.0 3.5–34.03 7.0/8.5 11.5 — — 3.5–12.5 3.5–34.0 3.5–34.0

60 1 7.0/9.5 11 — — 12.5 1.0–33.0 1.0–42.5(2000–3200 cfm) 2 7.0/9.5 11 — — 12.5 3.5–33.0 3.5–42.5

3 7.0/9.5 11 — — 12.5 3.5–33.0 3.5–42.570 1 5.0/5.5 10.5 — — 8.5 1.0–32.0 1.0–46.5

(2500–4000 cfm) 2 5.0/5.5 10.5 — — 8.5 3.5–32.0 3.5–46.53 5.0/5.5 10.5 — — 8.5 3.5–32.0 3.5–46.5

Note: Discharge air temperature may not exceed 120°F.


20 1/8 3.4 1.130 1/4 6.4 2.740 1/2 11.2 4.050 3/4 12.2 5.060 1 — 8.270 2 3/4 23.2 9.4


SeriesFan-Powered



Fan Size HP 120V 208V 277V

2 1/10 3.3 2.0 1.03 1/4 5.8 3.6 1.84 1/3 6.2 4.1 2.05 1/2 10.1 6.5 3.36 3/4 13.4 8.4 4.57 2@1/2 20.2 13.0 6.6

35SE Nailor Electric Coil W Guidelines—Minimum to MaximumFan Single-Phase Voltage Three-Phase VoltageSize Stages 208V/240V 277V 347V 480V 208V 480V 575V

2 1 0.5–7.0 0.5–7.0 — — 0.5–7.0 0.5–7.0 —(150–540 cfm) 2 0.5–7.0 0.5–7.0 — — 0.5–7.0 0.5–7.0 —

3 0.5–7.0 0.5–7.0 — — 0.5–7.0 0.5–7.0 —3 1 0.5–8.0 .05–11.5 — — .05–11.5 .05–11.5 —

(150–775 cfm) 2 0.5–8.0 .05–11.5 — — .05–11.5 .05–11.5 —3 0.5–8.0 .05–11.5 — — .05–11.5 .05–11.5 —

4 1 0.5–8.0 .05–11.5 — — 0.5–14.5 .05–16.0 —(650–1080 cfm) 2 0.5–8.0 .05–11.5 — — 0.5–14.5 .05–16.0 —

3 0.5–8.0 .05–11.5 — — 0.5–14.5 .05–16.0 —5 1 0.5–8.0 .05–11.5 — — 0.5–14.5 0.5–20.5 —

(590–1400 cfm) 2 0.5–8.0 .05–11.5 — — 0.5–14.5 0.5–20.5 —3 0.5–8.0 .05–11.5 — — 0.5–14.5 0.5–20.5 —

6 1 0.5–8.0 .05–11.5 — — 0.5–14.5 0.5–32.5 —(860–1670 cfm) 2 0.5–8.0 .05–11.5 — — 0.5–14.5 0.5–32.5 —

3 0.5–8.0 .05–11.5 — — 0.5–14.5 0.5–32.5 —7 1 0.5–8.0 .05–11.5 — — 0.5–14.5 0.5–32.5 —

(1050–2185 cfm) 2 0.5–8.0 .05–11.5 — — 0.5–14.5 0.5–32.5 —3 0.5–8.0 .05–11.5 — — 0.5–14.5 0.5–32.5 —

Notes:1. Analog electronic controls are limited to maximum 2 stages.2. Discharge air temperature may not exceed 120°F.3. A minimum airflow of 70 cfm per kW is required for any given terminal in order to avoid possible nuisance tripping of the thermal cutouts.


SeriesFan-Powered


ECM QuickCompetitiveComparison

Quick Competitive ComparisonSeries Fan-Powered Comparison

Trane Titus ETI Price Nailor

Cfm Range @ .25 DSP 450–2300 Cfm 250–2450 Cfm 100–2375 Cfm 200–2800 Cfm 200–3400 Cfm

ARI Listed ECM units Yes No No No No

kW Range .5–22.0 kW .5–26.0 kW 7.0–25 kW 4.9–36.3 kW .5–28.0 kW

1-Row MBH Range 22.69–63.52 MBH 21.2–64.6 MBH 9.2–63.1 MBH 7.3–67.1 MBH 11.0–90.0 MBH

2-Row MBH Range 38.83–115.02 MBH 35.0–106.8 MBH 12.8–103.8 MBH 13.8–113.8 MBH 14.2–154.8 MBH

Horse Power Options

1/3 HP N/A N/A Opt. N/A N/A1/2 HP Opt. Opt. Opt. Opt. Opt.3/4 HP N/A N/A Opt. N/A Opt.1 HP Opt. Opt. Opt. Opt. N/A

ECM Motor Sizes

120 volt Opt. Opt. N/A Opt. Opt.277 volt Opt. Opt. Opt. Opt. Opt.

FLA120-volt

1/3 HP — — — — —1/2 HP 7.7 7.7 — 6.5/8.0 7.93/4 HP — — — — 12.6/25.21 HP 12.8 12.8 — 13.0 —

277-volt

1/3 HP — — 2.6 — —1/2 HP 4.1 4.1 4.1 2.0/4.0 3.53/4 HP — — 5.5 — 5.5/10.91 HP 6.9 6.9 6.9 6.0 —

Units Offered

Series Yes Yes Yes Yes YesParallel No No No Yes No

SeriesFan-Powered


ECMValve/FanCombinations

Nailor 35SInlet Sizes

Fan Sizes 4" 5" 6" 8" 10" 12" 14" 16" 18" oval

3 (200–1100 cfm) X X X5 (500–2020 cfm) X X X7 (1500–3400 cfm) X X

Trane VS*FInlet Size

Fan Sizes 4" 5" 6" 8" 10" 12" 14" 16"

4 (450–1100 cfm) X X X5 (1000–2300 cfm) X X X

Titus TQSInlet Sizes

Fan SIzes 4" 5" 6" 8" 10" 12" 14" 16"

04 (450–1350 cfm) X X X06 (1050–2300 cfm) X X X

ETI CFRQInlet Sizes

Fan Sizes 4" 5" 6" 8" 10" 12" 14" 16"

11 (100–900 cfm) X X19 (700–1400 cfm) X X X21 (1200–2000 cfm) X X X24 (1400–2360 cfm) X X

Price F*CEInlet Sizes

Fan Sizes 4" 5" 6" 8" 10" 12" 14" 16"

20 (200–700 cfm) X X40 (400–1800 cfm) X X60 (1000–2800 cfm) X X

SeriesFan-Powered


ECM SizeComparison

Trane VSxF—Size ComparisonFan Cooling Electric H20 Width Height Cooling Cooling Electric H20Size Length Heat Length Footprint Volume Heat Length


04 40 50 46.75 24 21.5 6.67 11.94 10.00 6.7505 40 50 46.75 24 21.5 6.67 11.94 10.00 6.75

Titus TQS—Size ComparisonFan Cooling Electric H20 Width Height Cooling Cooling Electric H20Size Length Heat Length Footprint Volume Heat Length


4 40.875 46.875 49.875 36.25 17.125 10.29 14.68 6.00 9.006 46.875 52.875 55.875 48.25 20.125 15.71 26.34 6.00 9.00

ETI CFRQ—Size ComparisonFan Cooling Electric H20 Width Height Cooling Cooling Electric H20Size Length Heat Length Footprint Volume Heat Length


11 35 47 45 23.375 14 5.68 6.63 12.00 10.0019 40 52 50 29.375 17 8.16 11.56 12.00 10.0021 40 52 50 35.375 17 9.83 13.92 12.00 10.0024 50 62 60 47.375 19 16.45 26.05 12.00 10.00

Electric Heater may extend from 6" to 12" depending on options.

Price FxC–Size ComparisonFan Cooling Electric H20 Width Height Cooling Cooling Electric H20Size Length Heat Length Footprint Volume Heat Length


20 28 34 37 24 14 4.67 5.44 6.00 9.0040 32 41 41 36 17.5 8.00 11.67 9.00 9.0060 38 47 47 46 20 12.14 20.23 9.00 9.00

Water coils are 6" w/o access door and 9" w/ access door.

Nailor 35SST—Size ComparisonFan Cooling Electric H20 Width Height Cooling Cooling Electric H20Size Length Heat Length Footprint Volume Heat Length


3 36 51.25 48 29 18 7.25 10.88 15.25 12.005 41 56.25 53 41.75 18 11.89 17.83 15.25 12.007 57.25 72.5 69.25 84 18 33.40 50.09 15.25 12.00

SeriesFan-Powered


Cfm Size 4 Size 6

Cooling Max. 1375 2450Only Min. 250 1150HW Max. 1375 2450

1-row Min. 250 1150HW Max. 1375 2450

2-row Min. 250 1150

Titus Fan Performance @ .25" DSP

Cfm Size 04 Size 05

Cooling Max. 1100 2300Only Min. 450 1000HW Max. 1100 2300

1-row Min. 450 1000HW Max. 1100 2300

2-row Min. 450 1000

ETI Fan Performance @ .25" DSPCfm Size 11 Size 19 Size 21 Size 24

Cooling Max. 900 1400 2000 2375Only Min. 100 700 1200 1400HW Max. 900 1400 2000 2375

1-row Min. 100 700 1200 1400HW Max. 900 1400 2000 2375

2-row Min. 100 700 1200 1400

Cfm Size 20 Size 40 Size 60

Cooling Max. 700 1800 2800Only Min. 200 400 1000HW Max. 700 1600 2400

1-row Min. 200 400 1000HW Max. 700 1400 2200

2-row Min. 200 400 1000

Price Fan Performance @ .25" DSP

Cfm Size 3 Size 5 Size 7

Cooling Max. 1100 2025 3400Only Min. 200 500 1500HW Max. 1100 2025 3400

1-row Min. 200 500 1500HW Max. 1100 2025 3400

2-row Min. 200 500 1500

Nailor Fan Performance @ .25" DSP

ECM PerformanceData—Fan AirflowComparison

SeriesFan-Powered


ECM PerformanceData— AirflowComparison

0 500 1000 1500 2000 2500 3000 3500Cfm Range

3

5

7

20

40

60

11

19

21

24

4

6

4

5

Fan

Siz

e

ECM Fan Range

TRANE

TITUS

ETI

PRICE

NAILOR

SeriesFan-Powered


Trane ECM—Fan Size 04 (I-P)Water


1-Row 1 .36 22.69 23.62 25.19 26.46 27.49 28.37 29.13 29.75Capacity 2 1.25 27.35 28.64 30.90 32.82 34.47 35.93 37.30 38.47

MBH 3 2.59 29.27 30.78 33.43 35.72 37.71 39.49 41.08 42.464 4.36 30.34 31.97 34.86 37.36 39.56 41.53 43.31 44.855 6.56 31.02 32.73 35.77 38.42 40.76 42.86 44.76 46.416 9.16 31.49 33.26 36.41 39.16 41.60 43.79 45.78 47.527 12.15 31.84 33.65 36.88 39.71 42.22 44.49 46.55 48.34

2-Row 2 2.25 38.83 41.75 46.72 50.78 54.15 57.00 59.44 —Capacity 3 4.6 41.2 44.65 50.56 55.58 59.86 63.57 66.83 69.59

MBH 4 7.67 42.46 46.12 52.60 58.15 62.97 67.21 70.97 74.195 11.41 43.21 47.03 53.85 59.76 64.93 69.51 73.61 77.146 15.83 43.72 47.65 54.70 60.85 66.27 71.09 75.44 79.197 20.90 44.09 48.09 55.32 61.64 67.24 72.25 76.77 80.70

Titus ECM—Fan Size 4 (I-P)Water

Pressure Airflow (Cfm)Rows Gpm Drop 800 880 960 1040 1120 1200 1280 1360 1440

1-Row 1.0 .30 21.2 21.9 22.6 23.2 23.8 24.3 24.8 25.3 25.7Capacity 2.0 .90 25.2 26.3 27.3 28.3 29.1 30.0 30.7 31.5 32.2

MBH 4.0 3.2 28.0 29.3 30.6 31.8 32.9 34.0 35.0 36.0 36.96.0 6.5 29.1 30.5 31.9 33.2 34.5 35.7 36.8 37.9 38.9

2-Row 1.0 .60 35.0 36.1 37.0 37.9 38.7 39.4 40.0 — —Capacity 2.0 2.0 44.4 46.3 48.1 49.7 51.2 52.6 53.9 — —

MBH 4.0 6.8 50.8 53.4 55.9 58.3 60.4 62.5 64.4 — —6.0 13.9 53.3 56.3 59.1 61.7 64.2 66.6 68.8 — —

Titus ECM—Fan Size 6 (I-P)Water

Pressure Airflow (Cfm)Rows Gpm Drop 1300 1440 1580 1720 1860 2000 2140 2280 2420

1-Row 1.0 .40 31.7 32.7 33.6 34.4 35.2 35.8 36.5 37.0 37.6Capacity 2.0 1.3 39.8 41.5 43.1 44.5 45.9 47.1 48.3 49.3 50.4

MBH 4.0 4.3 45.5 47.9 50.0 52.0 53.9 55.6 57.3 58.9 60.36.0 8.8 47.9 50.4 52.8 55.1 57.2 59.2 61.1 62.9 64.6

2-Row 1.0 .80 47.3 48.3 49.2 50.0 50.6 51.2 51.7 — —Capacity 2.0 2.6 66.2 68.8 71.1 73.2 75.0 76.7 78.3 — —

MBH 4.0 9.0 80.2 84.4 88.3 91.8 95.1 98.2 101.0 — —5.0 13.4 83.5 88.1 92.4 96.4 100.1 103.6 106.8 — —

Trane ECM—Fan Size 05 (I-P)Water


1-Row 2 1.26 37.30 39.09 40.63 41.98 43.17 44.23 45.19 46.60 47.30Capacity 3 2.61 41.08 43.20 45.05 46.74 48.28 49.67 50.93 52.81 53.75

MBH 4 4.39 43.31 45.68 47.78 49.65 51.34 52.88 54.31 56.49 57.605 6.58 44.76 47.31 49.57 51.60 53.43 55.11 56.65 58.97 60.156 9.19 45.78 48.46 50.84 52.98 54.92 56.70 58.34 60.81 62.077 12.20 46.55 49.32 51.79 54.02 56.04 57.90 59.61 62.20 63.52

2-Row 3 4.65 66.83 71.07 74.71 77.92 80.79 83.40 85.80 89.45 —Capacity 4 7.75 70.97 75.93 80.25 84.09 87.57 90.77 93.74 98.29 100.67

MBH 5 11.52 73.61 79.05 83.84 88.14 92.05 95.67 99.04 104.26 107.006 15.96 75.44 81.23 86.36 90.99 95.22 99.15 102.83 108.55 111.577 21.05 76.77 82.84 88.23 93.10 97.58 101.75 105.67 111.78 115.02

ECM PerformanceData— HotWater Coil

SeriesFan-Powered



ETI ECM—Fan Size 11 (I-P)Water


1–Row 0.5 0.4 9.2 10.9 13.1 13.8 14.9 15.4 15.8 16.1Capacity 1.0 1.4 10.6 13.1 14.9 17.7 19.7 20.5 21.2 21.9

MBH 2.0 4.9 11.6 14.5 16.9 20.6 23.3 24.5 25.6 26.64.0 17.4 12.1 15.4 18.1 22.4 25.8 27.2 28.6 29.85.0 — — — — — — — — —

2–Row 0.5 0.1 12.8 15.1 17.6 18.4 19.5 19.9 20.3 20.6Capacity 1.0 0.4 15.4 19.2 24.0 25.7 28.3 29.3 30.2 31.0

MBH 2.0 1.2 17.0 22.0 29.1 31.8 36.1 37.9 39.5 40.94.0 4.4 17.9 23.7 32.4 35.9 41.7 44.2 46.5 48.55.0 6.6 18.1 24.0 33.1 36.8 43.0 45.7 48.1 50.4

ETI ECM—Fan Sizes 19, 21 (I-P)Water


1–Row 0.5 0.4 16.3 16.8 17.8 18.5 19.1 19.5 19.9 20.3Capacity 1.0 1.4 21.4 22.5 24.3 25.8 27.0 28.0 28.9 29.7

MBH 2.0 4.9 25.3 26.9 29.6 31.9 33.8 35.5 37.0 38.44.0 17.4 27.8 29.8 33.1 36.1 38.6 40.9 42.9 44.85.0 — — — — — — — — —

2–Row 0.5 0.1 21.0 21.5 22.3 22.9 23.4 23.7 24.0 24.2Capacity 1.0 0.4 30.5 31.8 34.0 35.7 37.0 38.0 38.9 39.7

MBH 2.0 1.4 38.5 40.9 44.9 48.2 50.9 53.2 55.2 57.04.0 4.9 43.9 47.2 53.0 57.8 62.0 65.7 68.9 71.95.0 7.4 45.2 48.7 54.9 60.1 64.7 68.8 72.4 75.7

ETI ECM—Fan Size 24 (I-P)Water


1–Row 0.5 0.6 21.1 21.9 22.5 23.0 23.4 23.8 24.0 24.3Capacity 1.0 2.0 30.0 31.8 33.4 34.6 35.7 36.7 37.5 38.3

MBH 2.0 7.1 37.3 40.3 43.0 45.2 47.3 49.1 50.7 52.24.0 24.5 42.2 46.3 49.8 53.0 55.8 58.4 60.8 63.15.0 — — — — — — — — —

2–Row 0.5 0.2 25.3 25.8 26.2 26.4 26.6 26.8 27.0 27.1Capacity 1.0 0.6 40.3 42.2 43.7 44.9 45.9 46.7 47.0 47.9

MBH 2.0 2.0 54.7 58.9 62.4 65.4 67.9 70.1 72.0 73.84.0 7.0 65.0 71.5 77.2 82.2 86.6 90.6 94.2 97.55.0 10.5 67.3 74.5 80.8 86.3 91.3 95.9 100.0 103.8

SeriesFan-Powered


Price ECM—Fan Size 20 (I-P)Water


1-Row 0.5 .18 7.3 7.8 8.4 8.9 9.4 9.9 10.4 10.9Capacity 1.0 .45 8.4 9.1 9.8 10.4 11.0 11.6 12.2 12.8

MBH 2.0 1.54 9.5 10.3 11.1 11.8 12.5 13.2 13.9 14.63.0 3.17 10.1 11.0 11.8 12.6 13.4 14.1 14.9 15.6

2-Row 1.0 .45 13.8 14.6 15.3 15.9 16.6 17.2 17.8 18.5Capacity 2.0 1.54 16.9 17.8 18.7 19.6 20.4 21.2 22.0 22.8

MBH 4.0 5.29 20.2 21.4 22.5 23.6 24.6 25.6 26.5 27.56.0 10.88 22.3 23.6 24.9 26.1 27.2 28.3 29.4 30.4



1-Row 1.0 .28 17.8 18.8 19.8 20.8 21.7 22.7 23.7 24.7Capacity 2.0 1.09 20.8 22.0 23.2 24.4 25.6 26.7 27.9 29.0

MBH 4.0 4.15 23.7 25.1 26.5 27.8 29.2 30.5 31.8 33.16.0 9.10 25.3 26.8 28.3 29.7 31.2 32.6 34.0 35.4

2-Row 1.5 .55 29.7 30.9 32.1 33.2 34.3 35.5 36.6 37.8Capacity 3.0 1.88 36.9 38.5 40.0 41.4 42.8 44.3 45.7 47.1

MBH 6.0 6.45 44.8 46.7 48.6 50.4 52.2 53.9 55.6 57.49.0 13.27 49.8 51.9 54.0 56.0 58.8 59.9 61.9 63.8



1-Row 1.5 .29 35.3 36.2 37.2 38.1 39.1 40.0 40.9 41.9Capacity 3.0 1.13 41.9 43.0 44.1 45.2 46.3 47.5 48.6 49.7

MBH 6.0 4.31 48.1 49.4 50.6 51.9 53.2 54.5 55.7 57.09.0 9.45 51.5 52.9 54.3 55.7 57.0 58.4 59.8 61.1

2-Row 3.0 .43 61.0 62.2 63.4 64.6 65.8 66.9 68.1 69.3Capacity 6.0 1.47 75.7 77.2 78.7 80.2 81.6 83.1 84.6 86.0

MBH 12.0 5.02 91.8 93.6 95.4 97.2 99.0 100.8 102.5 104.318.0 10.33 101.9 103.9 105.9 107.9 109.9 111.8 113.8 115.7


SeriesFan-Powered



Nailor ECM—Fan Size 7 (I-P)Water


1-Row 1 0.13 31.2 32.1 34.5 35.9 36.3 37.3 37.8 38.0Capacity 2 0.48 41.2 44.8 47.1 49.0 51.2 52.7 53.9 55.5

MBH 4 1.9 48.2 53.1 57.5 61.2 63.8 66.3 68.4 71.25 2.9 51.2 56.0 60.1 63.9 67.5 70.9 73.1 75.7

7.5 6.0 53.5 58.4 63.8 68.0 72.5 76.1 78.3 81.12-Row 1 0.1- 40.0 42.1 43.2 44.2 45.0 45.8 46.2 47.1

Capacity 2 0.28 57.6 62.4 66.1 68.6 71.1 72.7 74.8 76.2MBH 4 1.1 72.5 80.1 87.1 92.5 97.4 101.2 105.0 108.2

5 1.7 77.1 85.8 92.7 99.2 104.7 109.8 113.78 117.67.5 3.5 82.5 92.6 101.9 108.8 116.2 123.0 128.8 133.7

Note: Sizes 2 and 3, 1-row coils are single-circuit. Sizes 4–7, 1-row coils are multi-circuit. All 2-row coils are multi-circuit.



1-Row 0.5 <.19 — 15.7 16.3 17.0 17.5 18.0 18.3Capacity 1 0.19 19.1 21.4 23.8 24.0 25.2 26.0 26.8

MBH 2 0.73 22.7 25.9 28.2 30.3 31.8 33.5 34.84 2.8 25.0 28.9 32.0 34.8 37.0 39.0 40.95 4.2 25.6 29.6 33.0 35.9 38.3 40.4 42.2

2-Row 0.5 <.15 19.0 20.2 21.0 21.9 22.1 22.5 23.0Capacity 1 0.15 27.0 30.0 32.2 34.0 35.2 36.1 37.1

MBH 2 0.58 34.0 39.1 43.2 46.4 47.8 51.4 53.14 2.2 39.0 45.9 51.6 56.4 60.8 64.5 67.95 3.5 40.1 47.6 53.9 59.1 63.7 68.0 71.4



1-Row 0.5 <1.2 — 12.9 14.2 15.1 15.9 16.4Capacity 1 1.2 12.9 16.1 18.3 19.9 21.4 22.2

MBH 2 4.4 14.2 18.3 21.3 23.5 25.5 27.04 >10 15.0 19.8 23.1 26.0 28.3 30.45 >10 15.5 20.0 23.6 26.5 29.0 31.1

2-Row 0.5 <.3 14.1 16.9 18.5 19.4 20.2 21.0Capacity 1 0.3 18.0 23.1 26.2 28.9 30.4 31.9

MBH 2 1.2 20.9 28.2 33.1 37.1 40.2 41.94 4.4 22.5 31.2 37.9 43.3 47.8 51.55 7.0 23.0 32.0 39.0 44.8 49.4 53.5

SeriesFan-Powered


VSEF Trane ECM Electric Coil kW Guidelines—Minimum to MaximumInlet Single-Phase Voltage Three-Phase VoltageSize Stages 208V/240V 277V 347V 480V 208V 480V 575V

3 1 0.5–8.0 1.0–11.0 — 1.0–11.0 0.5–11.0 1.0–11.0 —(450–1100 cfm) 2 1.0–8.0 1.0–11.0 — 1.5–11.0 1.0–9.0 — —

3 0.5–8.0 1.0–11.0 — 2.5–8.0 1.5–9.0 — —4 1 0.5–7.0 0.5–8.0 — 1.0–16.0 0.5–12.0 1.0–16.0 —

(1000–2300 cfm) 2 0.5–7.0 0.5–8.0 — 1.0–16.0 1.0–12.0 3.0–16.0 —3 1.0–7.0 1.0–8.0 — 1.5–16.0 1.5–12.0 4.5–12.0 —

Notes:1. Available kW increments are by 0.5 kW from 0.5–8.0 kW, by 1.0 kW from 9.0–17.0 kW, and by 2.0 kW from 18–24.0 kW.2. All heaters come with an auto-thermal cutout (140°F (60°C)) and manual reset cutout (160° F (71°C)).

ECM Fan Electrical PerformanceMax FLA

Fan Size HP 120VV 277V

04 1/2 7.7 4.105 1 12.8 6.9

CFRQ ETI ECM Electric Coil kW Guidelines—Minimum to MaximumInlet Single-Phase Voltage Three-Phase VoltageSize Stages 208V/240V 277V 347V 480V 208V 480V 575V

11 1 7.0 7.0 7.0 7.0 7.0 7.0 7.0(100–900 cfm) 2 7.0 7.0 7.0 7.0 7.0 7.0 7.0

3 7.0 7.0 7.0 7.0 7.0 7.0 7.019 1 20.0 20.0 20.0 20.0 20.0 20.0 20.0

(700–1400 cfm) 2 20.0 20.0 20.0 20.0 20.0 20.0 20.03 20.0 20.0 20.0 20.0 20.0 20.0 20.0

21 1 25.0 25.0 25.0 25.0 25.0 25.0 25.0(1200–2000 cfm) 2 25.0 25.0 25.0 25.0 25.0 25.0 25.0

3 25.0 25.0 25.0 25.0 25.0 25.0 25.024 1 25.0 25.0 25.0 25.0 25.0 25.0 25.0

(1400–2360 cfm) 2 25.0 25.0 25.0 25.0 25.0 25.0 25.03 25.0 25.0 25.0 25.0 25.0 25.0 25.0

Notes:1. Maximum kW determined by dividing the actual fan capacity (cfm) by 70 (i.e. maximum 70 cfm per kW = 45° rise)2. Cfms are at 0.25" w.c.3. KWs assumed same as standard product, as catalog does not indicate otherwise.

ECM Fan Electrical PerformanceMax FLA 3-Phase

Fan Size HP 120V 277V Neutral Amps

11 1/3 — 2.6 5.419 1/2 — 4.1 7.121 3/4 — 5.5 9.524 1 — 6.9 11.9


4 1/2 7.7 4.16 1 12.8 6.9

TQS Titus ECM Electric Coil kW Guidelines—Minimum to MaximumInlet Single-Phase Voltage Three-Phase VoltageSize Stages 208V/240V 277V 347V 480V 208V 480V 575V

04 1 0.5–7.0 0.5–7.0 — — 1.5–7.0 1.5–7.0(450–1350 cfm) 2 1.0–7.0 1.0–7.0 — — 1.5–7.0 1.5–7.0

3 1.5–7.0 1.5–7.0 — — 1.5–7.0 1.5–7.006 1 0.5–9.0 0.5–11.5 — — 1.5–12.0 1.5–11.0

(1050–2300 cfm) 2 1.0–9.0 1.0–11.5 — — 1.5–12.0 1.5–11.03 1.5–9.0 1.5–11.5 — — 1.5–12.0 1.5–11.0

Note:1. KWs assumed same as standard product, as catalog does not indicate otherwise.ECM Fan Electrical Performance

ECM Fan Electrical Performance

ECM PerformanceData—ElectricCoil

SeriesFan-Powered


35S Nailor ECM Electric Coil kW Guidelines—Minimum to MaximumInlet Single-Phase Voltage Three-Phase VoltageSize Stages 208V/240V 277V 347V 480V 208V 480V 575V

3 1 0.5–7.0 0.5–7.0 — — 0.5–7.0 0.5–7.0 —(200–1100 cfm) 2 0.5–7.0 0.5–7.0 — — 0.5–7.0 0.5–7.0 —

3 0.5–7.0 0.5–7.0 — — 0.5–7.0 0.5–7.0 —5 1 0.5–8.0 .05–11.5 — — .05–11.5 .05–11.5 —

(500–2020 cfm) 2 0.5–8.0 .05–11.5 — — .05–11.5 .05–11.5 —3 0.5–8.0 .05–11.5 — — .05–11.5 .05–11.5 —

5 1 0.5–8.0 .05–11.5 — — 0.5–14.5 .05–16.0 —(1500–3400 cfm) 2 0.5–8.0 .05–11.5 — — 0.5–14.5 .05–16.0 —

3 0.5–8.0 .05–11.5 — — 0.5–14.5 .05–16.0 —Notes:1.KWs assumed same as standard product, as catalog does not indicate otherwise.2.Three low-height series units are available with 1/3 hp motor(s) providing from 100–1800 cfm.3.Units are available in standard or “Stealth” design. “Stealth” units have an integral attenuator.


Fan Size HP 120V 277V

3 1/2 7.9 3.55 3/4 12.6 5.57 2@3/4 25.2 10.9


Fan Size HP 120V 277V

20 1/2 6.5 2.040 1/2 8.0 4.060 1 13.0 6.0

F*CE Price ECM Electric Coil kW Guidelines—Minimum to MaximumInlet Single-Phase Voltage Three-Phase VoltageSize Stages 208V/240V 277V 347V 480V 208V 480V 575/600V

20 1 9.3/10 10 — — 10 10 10(200–700 cfm) 2 9.3/10 10 — — 3.6–10 3.6–10 3.6–10

3 9.3/10 10 — — 3.6–10 3.6–10 3.6–1040 1 8.7/10 12.5 — — 15 17.1 17.1

(400–1800 cfm) 2 8.7/10 12.5 — — 3.6–15 3.6–17.1 3.6–17.13 8.7/10 12.5 — — 3.6–15 3.6–17.1 3.6–17.1

60 1 7.7/8.8 12.2 — — 13.2 28.6 28.6(1000–2800 cfm) 2 7.7/8.8 12.2 — — 3.6–13.2 3.6–28.6 3.6–28.6

3 7.7/8.8 12.2 — — 3.6–13.2 3.6–28.6 3.6–28.6

ECM PerformanceData— ElectricCoil

References

TraneCatalog: VariTrane™ Products CatalogPublication Date: July 2001Literature #: VAV-PRC005-ENWeb site: http://tranenetlax1/Rushville_BU/Home/index.htm

TitusCatalog: Product Catalog 2001 T2K.1Publication Date: 2001Web site: www.titus-hvac.com

Enviro-TecCatalog: SDR CatalogPublication Date: October 2001Web site: www.enviro-tec.com

E. H. PriceCatalog: Air Distribution ProductsPublication Date: 2000Web site: www.price-hvac.com

NailorCatalog: VAV Terminal UnitsPublication Date: May 2001Web site: www.nailor.com

TraneA business of American Standard Companieswww.trane.com

For more information contact your local district officeor e-mail us at [email protected]

Literature Order Number VAV-SLM005-EN

File Number PL-TD-VAV-000-SLM005-EN-1002

Supersedes New

Stocking Location Electronic Only

Trane has a policy of continuous product and product data improvement and reserves the right to changedesign and specifications without notice.

confidential marketing guide - trane fan-p… · this fan-powered marketing guide is divided into...

Documents