conduit and pipe hangers
TRANSCRIPT
www.unitedfiberglass.com (800) 905-7506
57
UNDER BRIDGE UTILITY CONDUIT UNDER BRIDGE UTILITY CONDUIT HANGER AND SUPPORT SYSTEMSHANGER AND SUPPORT SYSTEMS
The selection and design of hangers and supports is an important part of the engineering aspect of any bridge conduit, drainage or pipe system. To ensure a long lasting and functional conduit system, it is essential that the following information be taken into account to arrive at the proper supports: • Concentrated hanger loads • Cable/inner duct weight loads on hanger inserts and connections • Thermal cycles of the bridge structures vs. the conduit, drainage or pipe • Vibration and harmonic effects • Long term deflection of the duct United Fiberglass of America is the leading designer and supplier of under bridge utility supports, and have established proven methods of performing this type work to arrive at the proper hanger design. We work closely with utilities, DOT’s, engineers and contractors to gather the considerable amount of data required to derive hanger and support calculations and also devote significant attention during the construction phase to ensure a proper installation. For engineers or contractors who occasionally become involved in hanger and support design, United Fiberglass offers various levels of service - from sub-contract engineering through installation, to assist you with proper design and installation of our products. Please contact United Fiberglass of America directly to discuss how our DESIGN AND INSTALLATION services can support you on your next project.
HA
NG
ER
S AN
D SU
PPOR
TS HA
NG
ER
S AN
D SU
PPOR
TS HA
NG
ER
S AN
D SU
PPOR
TS
To place an order: (800) 905-7506
DESIGN*FURNISH*INSTALL (800) 905-7506
WWW.UNITEDFIBERGLASS.COM
www.unitedfiberglass.com (800) 905-7506
58
GRID STYLE HANGERSGRID STYLE HANGERS PICTORIAL INDEXPICTORIAL INDEX
Intermediate and Anchor Point Deck Mount Hangers
Intermediate and Anchor Point Base Mount Hangers
United Fiberglass Grid Style Hangers are available in the following materials:
• Zinc Chromate • Zinc Plated • Hot Galvanized • * 304 & 316 Stainless • Cad Chromate • Composite Hardware
Anchor Point Style Hanger
Please contact United Fiberglass to determine proper hanger configurations for your under bridge conduit, drainage or pipe system.
HA
NG
ER
S AN
D SU
PPOR
TS HA
NG
ER
S AN
D SU
PPOR
TS HA
NG
ER
S AN
D SU
PPOR
TS
United Fiberglass supports arrive at the job-site fully assembled, complete with chemical or mechanical inserts, accessories and installation instructions.
To place an order: (800) 905-7506
www.unitedfiberglass.com (800) 905-7506
59
CONDUIT SUPPORT ACCESSORIESCONDUIT SUPPORT ACCESSORIES PICTORIAL INDEXPICTORIAL INDEX
Adjustable Two-Rod Roller Hanger
Adjustable Roller Support Adjustable Two-Rod Roller Support
Yoke Roller Hanger Roller Chair Extended C-Clamp with Locknut
Turnbuckle Top Beam Clamp Malleable Beam Clamp
Side Beam Clamp Adjustable Rod Beam Clamp Extension Piece
Consult with United Fiberglass early in your design process when considering the above listed products.
HA
NG
ER
S AN
D SU
PPOR
TS HA
NG
ER
S AN
D SU
PPOR
TS HA
NG
ER
S AN
D SU
PPOR
TS
To place an order: (800) 905-7506
www.unitedfiberglass.com (800) 905-7506
60
CONDUIT SUPPORT ACCESSORIESCONDUIT SUPPORT ACCESSORIES PICTORIAL INDEXPICTORIAL INDEX
C—Clamp
Concrete Insert
Eye Nut Single Bolt Guy Strand Clamp
Guy Strand
Mechanical Anchor
Beam Clamp
Fabricated Steel Angle Bracket
Ferrule Loop Insert
J– Hanger Pipe Strap
Chemical Inserts
Consult with United Fiberglass early in your design process when considering the above listed products.
HA
NG
ER
S AN
D SU
PPOR
TS HA
NG
ER
S AN
D SU
PPOR
TS HA
NG
ER
S AN
D SU
PPOR
TS
To place an order: (800) 905-7506
www.unitedfiberglass.com (800) 905-7506
61
Part #: NS125 Thread: 1.25-7 UNC Length: 5.75"
Part #: NS1 Thread: 1-8 UNC Length: 5.63"
Part #: NS1SE Thread: 1-8 UNC Length: 3.25"
Part #: NS78 Thread: 7/8-9 UNC Length: 4.87"
Part #: NS78S Thread: 7/8-9 UNC Length: 4.37"
Part #: I78 Thread: 7/8-9 UNC Length: 6.5"
Part #: NS34 Thread: 3/4-10 UNC Length: 3.75"
Part #: NS58 Thread: 5/8-11 UNC Length: 3.13"
Part #: NS12L Thread: 1/2-13 UNC Length: 5.00"
Part #: NS12SE Thread: 1/2-13 UNC Length: 2.00"
COMPOSITE CONCRETE ANCHORING SYSTEMSCOMPOSITE CONCRETE ANCHORING SYSTEMS
United Fiberglass offers composite inserts that are designed for use in concrete applications. They are precision injection molded using high impact polymer material that provides:
• High tensile strength • Excellent corrosion protection • High electrical insulation– eliminates stray current from the conduit to the bridge deck • Excellent impact resistance • Broad chemical resistance • Superior heat and weathering resistance • Excellent performance in vibratory load environments
Our composite inserts supply both cost and performance advantages over steel and stainless steel inserts, and are ideal for use in the following construction applications: Rail * Telecommunications * Bridges and Highways * Sewer and Water * Marine * Pulp and Paper
• Inserts have a closed thread system that prevents concrete fines from contaminating the threads • Thread free entry zone allows for quick alignment of the bolt • Smaller footprint compared with other inserts saves time and labor • Inserts come with top caps to seal out debris and water • Extremely cost effective compared with steel “loop type” inserts
HA
NG
ER
S AN
D SU
PPOR
TS HA
NG
ER
S AN
D SU
PPOR
TS HA
NG
ER
S AN
D SU
PPOR
TS
To place an order: (800) 905-7506
www.unitedfiberglass.com (800) 905-7506
62
GRID TYPE SUPPORT HANGERSGRID TYPE SUPPORT HANGERS ESTIMATING GUIDEESTIMATING GUIDE
Please provide United Fiberglass with the following information when ordering Grid Type Hangers: Number of ducts high Number of ducts wide Spacing between cross members (B) Spacing between rod centers (B + 1”) Overall length of support rods Hardware material (316SS, 304SS, HDG, Zinc) Conduit O.D and Type Length of bridge span Transition from bridge (sweep or through abutment) New or existing structure Type of Anchor (loop, chemical, expansion) Estimated quantity required (in) Design or engineering assistance required? Installation assistance or training required? For Anchor Point Hangers, please provide the following: Run (horizontal distance between bolt centers)
Rise (distance from bottom of flat crossbar) Threaded rod diameter to be used as support
PLEASE RETURN QUOTATION TO:
Company Name Contact Address City State
Zip Phone Fax
Please fax a copy of this document to United Fiberglass of America: (937) 325-7305 or call toll free: (800) 905-7506
WE ALSO OFFER HUNDREDS OF STYLES OF CONDUIT, DRAINAGE AND PIPE HANGERS AND SUPPORTS FOR
INDUSTRIAL AND UTILITY APPLICATIONS. CALL US FOR A QUICK QUOTE ON YOUR NEXT JOB!
HA
NG
ER
S AN
D SU
PPOR
TS HA
NG
ER
S AN
D SU
PPOR
TS HA
NG
ER
S AN
D SU
PPOR
TS
To place an order: (800) 905-7506