condition monitoring 1
DESCRIPTION
OSBODDTRANSCRIPT
![Page 1: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/1.jpg)
CONDITION MONITORING
A K DarpeDepartment of Mechanical Engineering
Indian Institute of Technology Delhi
![Page 2: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/2.jpg)
Sound Maintenance Program: Need of the day
Periodic Measurements: Not foolproof
Predictive Maintenance (online continuous monitoring):
# catches the fault early# cost effective
Narora Atomic Power Plant failure: could have been avoided
FDAS, OLES-OSBUDD for KAPS developed
![Page 3: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/3.jpg)
Sound Maintenance Program: Need of the day
Periodic Measurements: Not foolproof
Predictive Maintenance (online continuous monitoring):
# catches the fault early# cost effective
Narora Atomic Power Plant failure: could have been avoided
FDAS, OLES-OSBUDD for KAPS developed
![Page 4: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/4.jpg)
Definition of Expert System• A computing system capable of representing
and reasoning about some knowledge rich domain, which usually requires a human expert, with a view toward solving problems and/or giving advice.– The level of performance makes it “expert.”– Some also require it to be capable of
explaining its reasoning.– Does not have a psychological model of how
the expert thinks, but a model of the expert’s model of the domain.
![Page 5: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/5.jpg)
Expert System Developed in IIT Delhi• OLES (online expert system)
• OSBUDD (operator support and backup data display).
• Uses knowledge base compiled by John S Sohre. • Continuous online vibration and process data
can be acquired from any machine.• The diagnosis of the fault is almost
instantaneous.• The important vibration data be trended over
any interval of time. • Orbit plot, waterfall plot, can be plotted.• An integrated signal analysis toolbox is
provided.
![Page 6: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/6.jpg)
Schematic of the system
DEVELOPMENT OF AN ONLINE DIAGNOSTIC SYSTEM FOR KAKRAPAR ATOMIC POWER PLANT
![Page 7: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/7.jpg)
![Page 8: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/8.jpg)
Frequency Domain Signal
![Page 9: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/9.jpg)
![Page 10: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/10.jpg)
![Page 11: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/11.jpg)
![Page 12: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/12.jpg)
![Page 13: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/13.jpg)
![Page 14: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/14.jpg)
![Page 15: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/15.jpg)
Transducer SignalConditioning FDAS
DiagnosticSystem(OLES)
TG Vibration Signals
Process Signals
Signal Flow for FDAS
![Page 16: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/16.jpg)
Signals received by FDAS
• Vibration Signals– Bearing vibration signals - 12 Nos– Shaft vibration signals - 8 Nos
• Important Process Signals– Generator Power– Condenser vacuum
![Page 17: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/17.jpg)
![Page 18: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/18.jpg)
![Page 19: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/19.jpg)
Schematic of the system
![Page 20: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/20.jpg)
OSBUDD (Operator Support and Back Up Data
Display)Displays processed data in various format
Trend of important vibration parameters
Expert system diagnostic results
Provision of reviewing past data
Demo and Help for operator assistance
![Page 21: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/21.jpg)
Plots: Time DomainFrequency DomainTrend OrbitWaterfall
Analysis: Expert System DiagnosisSignal Processing
Assistance: DemoHelp
Backup Data Loader
![Page 22: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/22.jpg)
Expert System
Each fault produces a typical frequency pattern (signature)
Sohre’s Database as knowledge base
Direction and type (shaft/brg) of predominant vibration taken into account
Expert system estimates probability of each fault, lists five most probable ones.
![Page 23: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/23.jpg)
![Page 24: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/24.jpg)
![Page 25: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/25.jpg)
Diagnostic tool from DSA International• Automated diagnostic system called Check-
mate• Uses frequency spectrum of vibration from
common data collection systems (either offline or online)
• User can select from the list of vibration spectra available at any particular point of the machine of interest.
• After selection the expert system compares the vibration levels of that particular point with alarm levels and suitable remedial action can be taken
• In the latest version of check-mate up to 700 spectra can be automatically analyzed in under 10 minutes.
COMMERCIAL CONDITION MONITORING SYSTEMS
![Page 26: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/26.jpg)
Check-Mate identifies• Unbalance.• Off-set misalignment.• Angular misalignment.• Bent shaft.• Looseness.• Unequal foundation stiffness.• Coupling lock-up.• Bearing problems-preload, looseness, inner race,
outer race, ball train defects.• Gear defects-tooth wear, misalignment, eccentricity,
broken or worn tooth/teeth, hunting tooth faults.
Cont…
![Page 27: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/27.jpg)
Check-Mate identifies• Sub-synchronous bearing instability.• Electrical faults-cracked rotor bars, eccentric rotor.• Rubs-rotor, axial.• Belt problems.• Cavitation.• Oil whirl.• Dry whirl.• Check-mate identifies faulty readings caused by a
loose or damaged sensor.
![Page 28: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/28.jpg)
Unique Features of Check-Mate• Model based, object oriented and data driven .
• Machines are quickly modeled with in built parts such as gears, bearings, shafts and motors.
• Spectra are accessed simply by clicking on the measurement locations.
• Frequencies associated with the typical generic faults are easily displayed by clicking on that part's icon.
• Spectral peaks are quickly identified.• The user can go the the part and ask for 1X, 2X, 3X
rotation speed or the BPFO (outer race ball pass frequency) and multiples to be displayed on the current spectra.
Cont…
![Page 29: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/29.jpg)
![Page 30: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/30.jpg)
![Page 31: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/31.jpg)
![Page 32: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/32.jpg)
Unique Features of Check-Mate• Trends for specific fault frequencies are
extracted from waterfall diagrams.• Trends will also accurately track harmonics and
wide band frequencies.• Alert levels are set for individual fault
frequencies, harmonics and wide-band modulations.
• Actual frequencies for alerts are automatically recalculated for machine speed of each spectrum.
• Diagnostics include clear advice on appropriate operation or maintenance actions.
• DSA international can supply customized rules or machine parts to meet one’s special requirements.
![Page 33: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/33.jpg)
DSA International Corporation4580 Marineview Crescent
North Vancouver, BC V7R 3P5Canada
phone: 604-986-0936fax: 604-986-0935
email: [email protected]
![Page 34: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/34.jpg)
A Fault Diagnosis and Maintenance Expert System for
Rotating Machinery• The FDMES for rotating machinery has its own distinguishing feature in both the rules and reasoning mode.
• Knowledge based rules of FDMES are compiled from diagnostic tables of mechanical faults.
• The FDMES can diagnose 58 kinds in 10 categories of mechanical faults give the second reasons: design and manufacture, installation and maintenance, operation and control, machine deterioration and give the methods of prevention and cure.
• FDMES is used in 18 large enterprises in China.
![Page 35: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/35.jpg)
BENTLY NEVADA’ Data Manager • Bently Nevada’s data manager (DM2000) with
continuous, online data acquisition, archiving, and display capabilities.
• Static and dynamic data under steady-state and transient operating conditions can be collected.
• Data acquisition modes can be both automatically and manually initiated.
• Data display stations can be located where desired in LAN,WAN or RAS.
• MMS(Machinery Management Services) engineers are available for help. The MMS engineers may be able to determine the condition of machinery from the remotely transmitted data alone.
![Page 36: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/36.jpg)
Display plots available• Current values, bar graph, machine train
diagram, trend, fast trend, high resolution trend , multivariable trend, acceptance region, time base, shaft average centerline, spectrum/full spectrum, alarm list, system list, waterfall, bode, polar, cascade, plus orbit and plus spectrums.
• Along with expert system, Bently Nevada provides hardware and software products primarily designed for online acquisition and presentation of data and information.
• Bently Nevada provides portable condition monitoring solutions.
![Page 37: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/37.jpg)
![Page 38: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/38.jpg)
![Page 39: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/39.jpg)
BENTLY NEVADA’ System 1TM
• System 1™ is a patented modular and scalable software platform for managing plant asset data and information.
• Increases asset availability and reliability by providing a single, integrated tool for storing, accessing, and managing plant production assets with information, rather than simply data.
• System 1™ replaces previous Bently Nevada stand-alone online software programs such as Trendmaster® 2000, data manager® 2000, and machine condition manager™ 2000 by combining the functionality of these products into a single platform.
Cont…
![Page 40: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/40.jpg)
• Accepts data from any data source, not just Bently Nevada condition monitoring hardware.
• Provides tools to capture and use condition data, historical data, baseline data, nameplate data, asset properties, lessons learned, and other relevant information.
• Provides tools to link documents and files, write reports, and to exchange data with other systems.
• High-end data analysis tools for diagnostics and root cause analysis are also part of System 1™
• SYSTEM 1TM is designed to be modular and scalable. Cont…
![Page 41: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/41.jpg)
![Page 42: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/42.jpg)
• Using this platform, a solution can be built to support a wide range of user scenarios in many industries such as
– Power generation– Pipelines– Refineries– Marine– Oil and gas– Waste water treatment– Food and pharmaceutical– Semiconductor manufacturing– Petrochemical – Pulp and paper– Metals and mining
![Page 43: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/43.jpg)
MasCon/ ProCon•NAIDEN’S (an SKF group Company) MasCon/ ProCon online system monitors and diagnoses various process and machine component conditions, and provides automatic advice for correcting existing or impending conditions.
•MasCon’s in-built hardware auto-diagnosis system continuously checks all sensors, cabling and electronics for any faults, signal interruption, shortcuts, or power failure.
•Any malfunctions triggers an alarm, and in the case of system power failure the system will automatically restart when the power returns.
Cont…
![Page 44: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/44.jpg)
MasCon/ ProCon•Data is transferred via TCP/IP. It can be sent to
company for quick help and action.•32 different sensors, signal and measurement
configuration can be accommodated. • Individual conditions for warning and alarm may
be set for each point.•By using expert guide, in-built software, One can
add the new machines using simple mouse clicks.
•The frequency bands, resolution, defect frequencies, machine diagnosis are generated automatically.
•Damaged machine components are identified independently of the measurement point position.
Cont…
![Page 45: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/45.jpg)
• Warnings and alarms are indicated in machine picture by yellow or red color measurements.
• Measurements are made by mouse click over desired point with overdue measurement indicators.
• Remote access via modem or internet is available.
• Selected reference spectra may be fixed and automatically matched with new or earlier measurements.
• Early detection of bearing faults using DPE (digital peak enveloping).
• Triggering alarm levels may be set to adjust automatically to load level and rotational speed.
Cont…
![Page 46: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/46.jpg)
![Page 47: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/47.jpg)
![Page 48: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/48.jpg)
![Page 49: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/49.jpg)
![Page 50: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/50.jpg)
• Advanced turbine fault diagnostics system:• Detection of eccentricity change in coupling, • Blade failure, • Bearing instability, • Steam whirl, • Rotor crack, • Rotor rubbing, • Temporary rotor bow, • Loose bearing pedestal, • Inclined position of bearing, • Electrical run-out, • Mechanical run-out, • Loose stator core in generator, • Change of imbalance at shutdown, • Radial bearing damage,• Inter turn short circuit in generator rotor, etc.
![Page 51: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/51.jpg)
Korea Institute of Science and Technology .
• Development of integrated diagnostic system for rotating machinery.
• Development of a portable vibration monitoring system, which can transfer data on USB port.
• Diagnostic algorithm based on Sohre¡’s chart and a rule base.
• Monitoring test for various fault case by using integrated simulator.
• Tele-monitoring system by internet.• Pre-step of new technology commercialization
through a small-size and integration.• Integrated machine health monitoring system.
![Page 52: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/52.jpg)
CONDITION MONITORING
Vibratory system
SENSORSSignal Acquisition
Signal Processing
Data AnalysisAnd Representation
Fault Identification
Damage Severity Identification
Knowledge base
Loading History
Residual Life
![Page 53: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/53.jpg)
Gear Teeth Mesh Forces
![Page 54: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/54.jpg)
First gear teeth mesh
Second gear teeth mesh
Time (sec)
Time for 1 revolution of gear
xcos(t)
Gear blank digs into pinion and withdraws once in one rotation xacos(at)
Time (sec)
Time for 1 revolution of gear
First gear teeth mesh
Time (sec)
Time for 1 revolution of gear
ttxxtx aa cos)]cos([)(
![Page 55: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/55.jpg)
Amplitude Modulation in Gear Pair
ttxxtx aa cos)]cos([)(
txtxtxttxtxtx aa
aa
aa )cos(2
)cos(2
cos)]cos(coscos[)(
carrier frequencies i.e.,gear mesh frequency -
modulation frequency i.e., rotational speed of the gear - a
txtx cos][)( With perfect gearing condition
With imperfect gearing condition
![Page 56: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/56.jpg)
Time domain information: mostly rich in content, little in information
![Page 57: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/57.jpg)
Charge Amplifier
Lab view software loaded on PC
User defined software for further processing
Computer
AID card
Voltage
Accelerometer
Charge I/P
Vibration being sensed
VIBRATORY SYSTEM
ITEMS COST IN RUPEES(Rs)
a) Charge based accelerometer (piezoelectric)
20,000 to 50,000
b) ICP type Accelerometer 15,000 to 40,000
c) Charge Amplifier (required only for charge type accelerometer) 1,00,000 to 2,00,000
d) Analog to Digital Converter Card 25,000 to 1,20,000(depending upon number of channels & sampling rate)
e) Labview Software for acquisition & subsequent signal processing.
80,000 onwards(basic version could cost more for pvt industry.
f) MATLAB for making user defined program 1,00,000 approx
![Page 58: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/58.jpg)
Charge Amplifier
Tacho
Channels
Portable data acquisition
system
Vibratory structure
Accelerometer
Laptop
ITEMS COST IN RUPEES(Rs)
Portable Data Acquisition system(OROS, PULSE (B&K), Pimento with Virtual Lab (LMS), etc.
18,00,000 roughlyfor 8 channel DataAcquisition System
![Page 59: Condition Monitoring 1](https://reader035.vdocuments.mx/reader035/viewer/2022062302/577cc6171a28aba7119db2d0/html5/thumbnails/59.jpg)
Summary
• Knowledge about the system• Selection of transducers, acquisition
system• Features of signal processing and
problems/issues associated with it• Data representation techniques• Interpretation • Experience – knowledgebase – update