concrete sikaplast® 3-in-1 water reducing admixture · this enables one admixture to be used for a...

4
CONCRETE Sikaplast® 3-in-1 Water Reducing Admixture

Upload: others

Post on 07-Apr-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: CONCRETE Sikaplast® 3-in-1 Water Reducing Admixture · This enables one admixture to be used for a multiple range of appli-cations. SikaPlast® 3-in-1 will comfortably perform as

CONCRETESikaplast® 3-in-1 Water Reducing Admixture

Page 2: CONCRETE Sikaplast® 3-in-1 Water Reducing Admixture · This enables one admixture to be used for a multiple range of appli-cations. SikaPlast® 3-in-1 will comfortably perform as

2CONCRETESikaPlast® 3-in-1

Sika's newest, versatile admixture. Whether you're producing low slump, super workable, self-compacting or precast concrete, Sikaplast® 3-in-1 will meet the challenge.

Sikaplast® 3-in-1 can be used in conjunction with Sika's retarders or accelerators to meet any require-ments.

SIKAPLAST® 3-IN-1MULTI-FUNCTION WATER REDUCING ADMIXTURE

Page 3: CONCRETE Sikaplast® 3-in-1 Water Reducing Admixture · This enables one admixture to be used for a multiple range of appli-cations. SikaPlast® 3-in-1 will comfortably perform as

1 PRODUCT - 3 SOLUTIONS

1 Day Compressive Strength (MPa)

28 Day Compressive Strength (MPa)

*Results based on the same mix design, cement content 300 kg/m3, SikaPlast 3in1 dose increase from 0 to 2000 ml/100 kg binder to achieve a reduction in w:c ratio.

0

10

20

30

40

50

60

70

Com

pres

sive

Str

engt

h (M

Pa)

SikaPlast 3in1 Dosage Increase

Sikaplast® 3-in-1 Effect on Strength*

3CONCRETE

SikaPlast® 3-in-1

EXCELLENCE IN WATER REDUCING ADMIXTURES WITH SikaPlast® 3-in-1

SikaPlast® 3-in-1 differs to the majority of concrete admixtures due to its versatility, allowing it to be utilised in a wide range of applications.

A typical water reducer will either retard excessively or quickly reach a point where no further water cut is possible with increasing doses. SikaPlast® 3-in-1 will provide increasing levels of water cut and strength as the dose is in-creased while maintaining neutral set properties. This enables one admixture to be used for a multiple range of appli-cations. SikaPlast® 3-in-1 will comfortably perform as a general-purpose admixture at low doses, but is as competent at high doses to produce self-compacting concrete or high early strengths for precast or post-tensioned applications. Sika’s range of accelerating, retarding and slump-keeping admixtures compliment SikaPlast® 3-in-1 to enable almost any challenge to be met.

Page 4: CONCRETE Sikaplast® 3-in-1 Water Reducing Admixture · This enables one admixture to be used for a multiple range of appli-cations. SikaPlast® 3-in-1 will comfortably perform as

Our most current general sales conditions shall apply. Please refer to the relevant data sheet prior to any use or processing of Sika products.

SIKA AUSTRALIA55 Elizabeth StreetWetherill Park, NSW, 2164Australia

ContactPhone : 1300 22 33 48Fax: +61 2 9756 0502aus.sika.com

SIKA‘S FULL RANGE OF CONSTRUCTION SOLUTIONS

Roofing

Sarnafil®

Sikaplan®

SikaRoof® MTC®

Joint Sealing

Sikaflex®

Sikasil®

Grouting

Sikadur®

SikaGrout®

Waterproofing

Sikaplan®, Sikalastic®

Sika® & Tricosal® Water stopsSika® Injection Systems

Flooring

Sikafloor®

SikaBond®

Concrete Repair and Protection

Sika® MonoTop®

Sikagard®

Sikadur®

Structural Strengthening

Sika® CarboDur®

SikaWrap®

Sikadur®

Concrete Production

Sika® ViscoCrete®

Sika® Retarder®

Sika® SikaAer®

Sika

Plas

t® 3

-in-1

· C

oncr

ete

· A

pril

2015

Coatings, Silanes & Siloxanes

Sikagard®

Ferrogard®