concrete repair & restoration (sika)
TRANSCRIPT
Con
stru
ctio
n
Repair and Restoration
Using Sika Materials
Sika Egypt
Con
stru
ctio
n Concrete Repair
After
Before
Con
stru
ctio
n.Repair:To replace or correct deteriorated, damaged, or faulty materials, components, or elements of a concrete structure..Repair systems:The materials and techniques used for repair..Protection:The process of maintaining a concrete structure in its present or restored condition by minimizing the potential for deterioration or damage in the future..Strengthening:The process of restoring the capacity of weakened components or elements to their original design capacity, or increasing the strength of components or elements of a concrete structure.
DefinitionsIntroduction :
ACI – 546R
Con
stru
ctio
n Repair Methodology :
.Evaluation.
.Relating observations to causes.
.Selecting methods and materials.
.Preparation of drawings and specifications.
.Selection of a contractor.
.Execution of the work.
.Quality control.
ACI – 546R
Con
stru
ctio
nConcrete Damage and Defects
Mechanical PhysicalChemical
Con
stru
ctio
n2.Concrete Damage due to reinforcement corrosion
Carbonation Chlorides Stray/Electrical Current
Concrete under Concrete under attackattack
ChloridesWater
Carbonation
Alkali Silica Reaction Temperature
Abrasion
Impact
Chemicals(Acids, solvents...)
++ Errors made during design or Construction
Con
stru
ctio
n The Procedures for Repairing ConcreteSurface Preparation :
.Concrete surfaces should be sound, clean and free from oils, grease or surface contaminants.
. Remove all loosely adhering particles.
Steel Protection and Bonding Agent :
. Steel reinforcement is to be cleaned using steel brush to remove all adhering particles .
.Protect the Steel from corrosion using Sika Steel Protection materials.
.Use a bonding agent to bond the old concrete with the repairing mortar (concrete).
. Could use a material with a combination between both actions .
Con
stru
ctio
n Using Cement-based Anti-Corrosive Rebar Coating :
Used in repairing Existing constructions
•Cement-based, Synthetic modified 2- component coating for corrosion protection.
•Used in reinforced corroded bars resulting from carbonation.
•Used against the action of Calcium Chlorides and de-icing salts.
•Excellent adhesion to steel .
•Good bonding coat for subsequent cement and epoxy-based repair mortar.
•Contains Corrosion inhibitors.Colour : Grey-Green
Using Sika Top Armatec -108:
Con
stru
ctio
n Using Cement-based Epoxy modified Anti-Corrosive Rebar Coating and bonding agent :
Used in repairing Existing constructions
Using Sika Top Armatec -110 EpoCem :
•Cement-based epoxy modified three-component anti-corrosive coating and bonding agent.
•As an anti-corrosion coating for reinforcement steel :
•Used in repairing of concrete where there is corrosion in the reinforcement steel.
•Act as an effective barrier against penetration of water and chlorides .
•As a bonding agent for use on concrete mortar or steel :•For bonding new concrete to old .•For repairs to concrete using SikaTop® and Sika® Rep patching and repair mortars .
Con
stru
ctio
n Sika Top Armatec -110 EpoCem:
•Coverage:
•As a bonding slurry not less than 1.5 – 2.0 Kg /m2 (depending on substrate conditions).
•As an anti-corrosion coating approx. 2 kg/m2/2 coats (depending on method of application) .
Con
stru
ctio
n Using Epoxy Primer for steel :Used in new constructions
Using Sika Zinc Rich – EG :
•To provide excellent protection against corrosion for iron , re-bars and steel structure .
•Theoretical layer thickness with a consumption of 100 g/m2 is 25 microns .
•Surface preparation is the most important step in the coating system:
.Oil or grease contamination should be totally removed.
.Blast cleaning
Con
stru
ctio
n Using Corrosion Inhibiting Impregnation :Used in new and Existing constructions
Using Sika Ferrogard -903:•Sika Ferrogard -903 is a corrosion inhibiting , emulsion-type impregnation for concrete .
•Sika Ferrogard -903 penetrates the concrete by liquid and vapour diffusion.
•Sika Ferrogard -903 has a high affinity to steel and forms a protective film on the steel surface .
•Sika Ferrogard -903 suitable for treatment of reinforcing steel which is corroding or in danger of being corroded in areas without any visible concrete defects .
Con
stru
ctio
n Sika Ferrogard -903:•Total consumption : 0.3-0.5 kg/m2
•Number of coats : 3-5 coats are required ( depend on the absorbency of the substrate .
•Penetration rate : Sika Ferrogard-903 can penetrate at a speed of 2.5 mm to 20 mm per day .
Protective layer :
•Sika Ferrogard-903 forms an adsorbed protective layer on the reinforcement .
•The process of forming this protective layer takes place even in carbonated concrete and with the presence of chlorides in the concrete.
Con
stru
ctio
n<45 degree
45 degree90 degree
خطأ مكن م ضل مف
SURFACE PREPARATION
CLEARLY DEFINED EDGES AT ANGLE > 45 DEGREE
Con
stru
ctio
n Sika Repairing Materials
1. 1. Repairing concrete:The quality depends on :
- Mix design - Quality of the components - Application practices
To improve properties of fresh and hardened concrete :
Use the Concrete admixtures:• Water Reducer, High Range Water Reducer (Plastiment and Sikament).•Silica fume (Sika Fume ).• Corrosion inhibitor => new generation of non-toxic mixed inhibitor - Modified Amino Alcohol (Ferrogard Technology – Ferrogard 901).
Use Sika Micro-Concrete System
Sika Crete 114
Con
stru
ctio
n 2. . Repairing mortars
Cementitious mortars:
Polymer modified blended mortarsPolymer modified blended mortarsCement + Sand + polymers(Sika Latex & Sika Bond DV & Sika Bond LA)
The polymer : . Acts as water-reducer. Improves bond strength. Improves flexural strength. Reduces permeability
Con
stru
ctio
n 3.Pre-blended Repair mortars3.1. Ordinary Repair mortars
Cement based, multi-purpose patching and repair mortar, incorporating the use of micro-fibers. (Sika Rep & Sika Rep Fine)
3.2. Polymer modified repair mortars.is a cement based, polymer modified, (Always two component) repair mortar with added polyamide fibers. (Sika Top 121 & 122)
Con
stru
ctio
n REPLACING DAMAGED CONCRETE
Sika Rep & Sika Latex mortarSika Top 122
Con
stru
ctio
n Epoxy Repair Mortar
(Sika Dur 41 )
-Three component mortars-High early mechanical performances-High chemical resistance
but with physical characteristics quite different than the concrete substrate characteristics :
-- Thermal coefficient expansion- Modulus of elasticity- Temperature resistance
Con
stru
ctio
n•Structural and non-structural cracks.•Static and live cracks.•Dry Cracks or running water Cracks.•Crack width.
Concrete Cracks :
Shrinkage CracksRebar Cracks
Con
stru
ctio
n Measuring Crack width
Con
stru
ctio
n
Surface Injection by SIKADUR 52For Cracks of 0.5 - 5 mm
Crack FillerSIKADUR 31
Cap SealSIKADUR 52
Surface Structural Cracks:
Con
stru
ctio
n Deep Structural Cracks:
Injection Holes
Cap SealSIKADUR 52
Deep Injection by SIKADUR 52
Con
stru
ctio
n Methods of Repair:
First Solution :Small repair thickness for concrete
Bonding Agent:• Using Sika Bond or Sika Latex S.B.R (modified styrene butadiene rubber emulsion) Sika Latex : Water 1:1 + (Cement : Sand, 1:1).• The first mortar coat must then be applied while the bonding grout is still wet. Repair Mortar :•Using Sika Bond or Sika Latex as a waterproofing admixture with RatioSika Latex : Mix. Water 1: 3 Repair Mortar : Sika Latex : Mixing water = 1:3
Con
stru
ctio
n Methods of Repair:
Second Solution :Large repair thickness for concrete
Bonding Agent:• Using Sika Latex .•Sika Top 121 (Polymer Modified Patching and Adhesive Mortar).•Sika Top Armatec -110 EpoCem.Repair Mortar :Sika Top 122 (Fiber Reinforced Polymer Modified Repair Mortar)Sika Rep (Multi-Purpose Patching and Repair Mortar)•Repair mortar with Sika Latex.
Repair Mortar
Bonding Agent
Con
stru
ctio
n Methods of Repair: Third Solution :
Large repair thickness with Steel CorrosionSteel Protection:
•Sika Top Armatec -108
•Sika Top Armatec-110 EpoCem.
•Sika Zinc RichBonding Agent:• Using Sika Latex .•Sika Top 121 (Polymer Modified Patching and Adhesive Mortar).•Sika Top Armatec -110 EpoCem.Repair Mortar :•Sika Top 122 (Fiber Reinforced Polymer Modified Repair Mortar)•Sika Rep (Multi-Purpose Patching and Repair Mortar)•Repair mortar with Sika Latex.
Use Sika Protective Coating
Sika Seal 105 –Sika Top Seal 107 – Sika gard 550 W
Con
stru
ctio
n Methods of Repair: Fourth Solution :
Large Vertical repair thickness with Steel CorrosionSteel Protection:
•Sika Top Armatec -108
•Sika Top Armatec-110 EpoCem.
•Sika Zinc RichBonding Agent: (Optional)• Using Sika Latex .•Sikadur 32Repair Mortar :•Sika grout 200/214 •Sika Crete 114
Use Sika Protective Coating
Sika Seal 105 –Sika Top Seal 107 – Sika gard 550 W
Con
stru
ctio
n Methods of Repair: Fifth Solution :
Large Vertical repair thickness with Steel CorrosionSteel Protection:
• Sika Top Armatec -108
• Sika Top Armatec-110 EpoCem.
• Sika Zinc RichBonding Agent: (Optional)• Using Sika Latex .• Sikadur 32Shotcrete Mortar :• Using Sigunit Powder.• SikaCem Gunit -133 Plaster Mortar :• Ordinary Repair mortar + Sika Latex.
Use Sika Protective Coating
Sika Seal 105 –Sika Top Seal 107 – Sika gard 550 W
Con
stru
ctio
n Fixation of dowels and starter bars.
•Sika Dur 31 CF (V/H)
•Sika Dur 42 (V)
•Sika Grout 200/214 (V)
Horizontal TieH
Vertical TieV
Con
stru
ctio
n Anchoring Fixation:
Tie depth (Ld) : (10-12 ) Øs
Tie Diameter : For Sikadur 31 (Øs + (2-4 mm))
For Sikadur 42 (Øs + 7 mm)
For Sika grout 200/214 (Øs + 18 mm)
Con
stru
ctio
n Grouting
Sikadur-42 ( Grout Epoxy )
Con
stru
ctio
n Sikadur-42 ( Grout Epoxy )
Con
stru
ctio
n Sikadur-42 ( Grout Epoxy )
Con
stru
ctio
n Repairing techniques
•HORIZONTAL APPLICATION
Pouring grout through openings
Pencil vibrator For Cement GroutSika Grout 200 & 214 & 295
Con
stru
ctio
n Methods of Repair: Sixth Solution :Strengthening of structures with Carbon Fiber
Reinforced polymer Strips
Con
stru
ctio
n CONCLUSION
The Repair Process seems easy but the quality and therefore the durability of the work is influenced bynumerous factors.Sika is helping the customers for the selectionof the material the most suitable for his application.This selection should take into consideration :
- causes of the damages- quality of the substrate ( preparation...)- qualification of the applicator- atmospheric conditions- cost of the repair
Con
stru
ctio
n