concrete pipe price catalogue - hynds pipe … pipe...hynds pipe systems is the largest operating...

ConCrete PiPePriCe Catalogue

september 2013

0800 we PiPe (93 7473) www.hynds.co.nz

about hynds

new Zealand’s premier product supplier for the management of water & water-based waste. supplying New Zealand’s infrastructure through innovation & partnership.

overviewestablished in 1973 Hynds Limited is a large privately owned New Zealand manufacturer and distributor of products for the management of water and water-based waste in the civil and rural infrastructure industry.

Hynds pipe systems is the largest operating unit in the Group with ten production plants manufacturing spun and precast concrete products; a nationwide network of 30 merchant branches; a fleet of 60 delivery trucks, and over 40,000 product lines available.

Commitment to quality management and accredited operating systemsHynds maintains an independently audited third party accreditation for the IsO9001 certified quality management systems, and follow founding policies that underpin commitment and performance outcomes to achieve our organisational vision and values. ‘s’ mark accreditation is maintained by regular audits.Auckland and Christchurch factories have independent third party accreditation for the manufacture of pressure and non pressure pre-cast pipe to As/NZs 4058:2007 standard.

how to Find usFor information about any product not shown in this price catalogue, please do not hesitate to contact your nearest Hynds branch (contact details on page 10 of this price catalogue) or phone 0800 We pIpe (93 7473)

hynds terms and conditionsplease refer to our published terms and Conditions of supply on page 12 of this price catalogue.

Further information and our full comprehensive range of product can be viewed on www.hynds.co.nz

PriCe Catalogue notesthis document is part of a series of price catalogues which form the Hynds range of Drainage products.

this price catalogue is given as a standard list price guide only.

prices are subject to change without prior notification.

Please note all prices exclude Gst and delivery.

hy

nd

s C

on

Cr

et

e P

iPe

Pr

iCe

Ca

talo

gu

e J

AN

uA

ry

2013

2

VC

t P

iPe HYSPeC ConCrete rubber rING JOINt

VCt PiPe

Hyspec VCt pipes are designed and manufactured to comply with the requirements of As/NZs 4058: 2007 “precast concrete pipes (pressure and non-pressure).” please refer to As/NZs 3725 “Design for installation of buried concrete pipe.” For details on calculation of vertical working loads and pipe installation options and procedures.

ClaSS 2 (X)

Product Code dn x length Weight (t) Price Price Per Metre

0225rJXHyV 225mm x 2.0m 0.161 $185.95 $96.78

0300rJXHyV 300mm x 2.5m 0.253 $292.20 $120.26

0375rJXHyV 375mm x 2.5m 0.313 $344.30 $141.58

0450rJXHyV 450mm x 2.5m 0.433 $476.30 $197.70

0525rJXHyV 525mm x 2.5m 0.568 $624.80 $257.96

0600rJXHyV 600mm x 2.5m 0.726 $798.60 $328.30


0225rJZHyV 225mm x 2.0m 0.161 $202.85 $105.23

0300rJZHyV 300mm x 2.5m 0.253 $318.75 $130.88

0375rJZHyV 375mm x 2.5m 0.313 $375.60 $154.10

0450rJZHyV 450mm x 2.5m 0.433 $519.60 $215.02

0525rJZHyV 525mm x 2.5m 0.569 $682.80 $281.16

0600rJZHyV 600mm x 2.5m 0.727 $872.40 $357.82

ClaSS 4 (Z)

■ pipe is manufactured using vertical dry-cast technology.

■ price per metre includes the rubber ring.

■ pricing is based on supply within the North Island only.

■ pipes utilise a rubber (rolling) “D” ring for pipe jointing.


r0225V 225mm - $7.60 -

r0300V 300mm - $8.45 -

r0375V 375mm - $9.65 -

r0450V 450mm - $17.95 -

r0525V 525mm - $20.10 -

r0600V 600mm - $22.15 -

rubber ring

hy

nd

s C

on

Cr

et

e P

iPe

Pr

iCe

Ca

talo

gu

e J

AN

uA

ry

2013

3

sP

un

PiP

eHYSPeC ConCrete rubber rING JOINt

SPun PiPe

Hyspec spun pipes are designed and manufactured to comply with the requirements of As/NZs 4058: 2007 “precast concrete pipes (pressure and non-pressure).” please refer to As/NZs 3725 “Design for installation of buried concrete pipe.” For details on calculation of vertical working loads and pipe installation options and procedures.

ClaSS 2 (X)


0225rJXHys 225mm x 2.5m 0.166 $232.00 $96.10

0300rJXHys 300mm x 2.5m 0.237 $290.00 $120.00

0375rJXHys 375mm x 2.5m 0.293 $344.30 $142.58

0450rJXHys 450mm x 2.5m 0.431 $476.30 $197.00

0525rJXHys 525mm x 2.5m 0.54 $624.80 $257.16

0600rJXHys 600mm x 2.44m 0.663 $798.60 $338.34

0675rJXHys 675mm x 2.44m 0.779 $817.95 $347.32

0750rJXHys 750mm x 2.44m 0.945 $992.25 $420.33

0825rJXHys 825mm x 2.44m 1.07 $1,123.50 $475.00

0900rJXHys 900mm x 2.44m 1.394 $1,463.70 $619.90

0975rJXHys 975mm x 2.44m 1.67 $1,753.50 $742.13

1050rJXHys 1050mm x 2.44m 1.934 $2,030.70 $857.23

1200rJXHys 1200mm x 2.44m 2.228 $2,339.40 $986.31

1350rJXHys 1350mm x 2.44m 2.486 $2,610.30 $1,109.55

1600rJXHys 1600mm x 2.44m 3.269 $3,432.45 $1,449.98

1800rJXHys 1800mm x 2.44m 4.061 $4,264.05 $1,821.33

■ manufactured using the centrifugal spinning process.


■ DN225–600 mm spun pipe pricing is based on supply within the south Island only.

■ pipes utilise a rubber (rolling) ring for pipe jointing.

■ please refer to technical literature for additional information.

hy

nd

s C

on

Cr

et

e P

iPe

Pr

iCe

Ca

talo

gu

e J

AN

uA

ry

2013

4

sP

un

PiP

e


0225rJZHys 225mm x 2.5m 0.161 $255.00 $105.56

0300rJZHys 300mm x 2.5m 0.24 $315.00 $130.06

0375rJZHys 375mm x 2.5m 0.296 $375.60 $155.10

0450rJZHys 450mm x 2.5m 0.438 $519.60 $214.32

0525rJZHys 525mm x 2.5m 0.551 $682.80 $280.36

0600rJZHys 600mm x 2.44m 0.789 $872.40 $368.59

0675rJZHys 675mm x 2.44m 0.923 $1,061.45 $447.11

0750rJZHys 750mm x 2.44m 1.117 $1,284.55 $540.12

0825rJZHys 825mm x 2.44m 1.268 $1,458.20 $612.17

0900rJZHys 900mm x 2.44m 1.444 $1,660.60 $700.59

0975rJZHys 975mm x 2.44m 1.7 $1,955.00 $824.71

1050rJZHys 1050mm x 2.44m 1.97 $2,265.50 $953.46

1200rJZHys 1200mm x 2.44m 2.484 $2,856.60 $1,198.28

1350rJZHys 1350mm x 2.44m 3.029 $3,483.35 $1,467.36

1600rJZHys 1600mm x 2.44m 4.036 $4,641.40 $1,945.45

1800rJZHys 1800mm x 2.44m 5.201 $5,981.15 $2,525.06

ClaSS 4 (Z)


0225rJyHys 225mm x 2.5m 0.167 $242.90 $100.72

0300rJyHys 300mm x 2.5m 0.238 $290.25 $120.16

0375rJyHys 375mm x 2.5m 0.295 $360.50 $149.06

0450rJyHys 450mm x 2.5m 0.434 $497.25 $205.38

0525rJyHys 525mm x 2.5m 0.545 $652.50 $268.24

0600rJyHys 600mm x 2.44m 0.764 $840.40 $355.47

0675rJyHys 675mm x 2.44m 0.916 $1,007.60 $425.04

0750rJyHys 750mm x 2.44m 1.101 $1,211.10 $510.02

0825rJyHys 825mm x 2.44m 1.244 $1,368.40 $575.37

0900rJyHys 900mm x 2.44m 1.414 $1,555.40 $657.48

0975rJyHys 975mm x 2.44m 1.682 $1,850.20 $781.76

1050rJyHys 1050mm x 2.44m 1.943 $2,137.30 $900.92

1200rJyHys 1200mm x 2.44m 2.245 $2,469.50 $1,039.63

1350rJyHys 1350mm x 2.44m 2.509 $2,759.90 $1,170.86

1600rJyHys 1600mm x 2.44m 4.026 $4,428.60 $1,858.24

1800rJyHys 1800mm x 2.44m 4.602 $5,062.20 $2,148.44

ClaSS 3 (Y)

hy

nd

s C

on

Cr

et

e P

iPe

Pr

iCe

Ca

talo

gu

e J

AN

uA

ry

2013

5

sP

un

PiP

eregional – CHriStCHurCH ClaSS 4 (Z)

rubber ring For SPun PiPe


0225rJZHys0.6 225mm x 0.6m 0.045 $137.50 -

0225rJZHys1.8 225mm x 1.8m 0.123 $199.93 -

0300rJZHys0.9 300mm x 0.9m 0.096 $150.24 -

0300rJZHys1.2 300mm x 1.2m 0.124 $167.60 -

0375rJZHys1.2 375mm x 1.2m 0.159 $240.48 -

0450rJZHys1.2 450mm x 1.2m 0.233 $316.42 -

0525rJZHys1.72 525mm x 1.72m 0.402 $494.78 -

0600rJZHys1.72 600mm x 1.72m 0.503 $616.28 -


r0225 225mm - $8.90 -

r0300 300mm - $10.15 -

r0375 375mm - $12.15 -

r0450 450mm - $16.20 -

r0525 525mm 18.1 $18.10 -

r0600 600mm - $26.95 -

r0675 675mm - $29.50 -

r0750 750mm 33.35 $33.35 -

r0825 825mm 35.5 $35.50 -

r0900 900mm 48.65 $48.85 -

r0975 975mm 57.3 $57.30 -

r1050 1050mm 60.95 $60.95 -

r1200 1200mm 67.2 $67.20 -

r1350 1350mm - $97.00 -

r1600 1600mm - $105.50 -

r1800 1800mm - $180.00 -

hy

nd

s C

on

Cr

et

e P

iPe

Pr

iCe

Ca

talo

gu

e J

AN

uA

ry

2013

6

sK

id r

ing

Jo

int HYSPeC ConCrete pIpe

Skid ring joint

Hyspec skid ring joint pipes are designed and manufactured to comply with the requirements of As/NZs 4058: 2007 “precast concrete pipes (pressure and non-pressure).” please refer to As/NZs 3725 “Design for installation of buried concrete pipe.” For details on calculation of vertical working loads and pipe installation options and procedures.

ClaSS 2 (X)


1950srJXHys 1950mm x 2.37m 5.702 5987.1 2610.8

2100srJXHys 2100mm x 2.44m 6.246 $6,558.30 $2,777.46

2300srJXHys 2300mm x 2.72m 8.921 $9,367.05 $3,542.48

2550srJXHys 2550mm x 2.45m 8.225 $8,636.25 $3,639.65

3050srJXHys 3050mm X 2.72m 14.224 $14,935.20 $5,615.66


1950srJyHs 1950mm x 2.37m 5.766 $6,342.60 $2,760.80

2100srJyHys 2100mm x 2.44m 6.298 $6,927.80 $2,928.89

2300srJyHys 2300mm x 2.72m 8.982 $9,880.20 $3,731.14

2550srJyHys 2550mm x 2.45m 8.382 $9,220.20 $3,878.00

3050srJyHys 3050mm x 2.72m 14.397 $15,836.70 $5,947.10

ClaSS 3 (Y)

■ economical solution for high water levels or large hydraulic flows.


■ Hyspec skid ring Joint pipes utilise a rubber skid (sliding) ring for pipe jointing.

■ please refer to technical literature for information on handling and storage.

■ DN1950–2100 mm are manufactured using the centrifugal spinning process.

■ DN2300–3050 mm are manufactured using the vertical wet cast process.

■ Lubricant required for all skid ring joints – sold seperately

hy

nd

s C

on

Cr

et

e P

iPe

Pr

iCe

Ca

talo

gu

e J

AN

uA

ry

2013

7

sK

id r

ing

Jo

int

in wall rubber ring For Skid ring PiPe


r1950sKIDG 1950mm - $200.50 -

r2100sKIDG 2100mm - $218.70 -

r2300sKIDF 2300mm - $268.50 -

r2550sKIDF 2550mm - $280.90 -

r3000sKIDJ 3050mm - $339.40 -

ClaSS 4 (Z)


1950srJZHys 1950mm x 2.37m 5.801 $6,671.15 $2,899.43

2100srJZHys 2100mm x 2.44m 6.36 $7,314.00 $3,087.17

2300srJZHys 2300mm x 2.72m 9.082 $10,444.30 $3,938.53

2550srJZHys 2550mm x 2.72m 11.47 $13,190.50 $4,952.72

3000srJZHys 3000mm x 2.695m 18.91 $21,149.65 $7,973.67

hy

nd

s C

on

Cr

et

e P

iPe

Pr

iCe

Ca

talo

gu

e J

AN

uA

ry

2013

8

Flu

sh

Jo

int HYSPeC ConCrete pIpe

FluSH joint

Hyspec flush joint pipes are designed and manufactured to comply with the requirements of should read As/NZs 4058: 2007 “precast concrete pipes (pressure and non-pressure).” please refer to As/NZs 3725 “Design for installation of buried concrete pipe.” For details on calculation of vertical working loads and pipe installation options and procedures.

ClaSS 2 (X)


0600FJXHys 600mm x 2.4m 0.582 $611.10 $277.33

0675FJXHys 675mm x 2.4m 0.71 $745.50 $334.29

0750FJXHys 750mm x 2.4m 0.826 $867.30 $390.96

0900FJXHys 900mm x 2.4m 1.117 $1,172.85 $522.15

1050FJXHys 1050mm x 2.4m 1.445 $1,517.25 $692.56

1200FJXHys 1200mm x 2.4m 1.802 $1,892.10 $854.10

1350FJXHys 1350mm x 2.4m 2.191 $2,300.55 $1,029.92

1500FJXHys 1500mm x 2.4m 2.453 $2,575.65 $1,150.60

1650FJXHys 1650mm x 2.4m 2.922 $3,068.10 $1,362.10

1800FJXHys 1800mm x 2.4m 3.417 $3,587.85 $1,586.52

2050FJXHys 2050mm x 2.4m 4.341 $4,558.05 $2,003.67

■ Hyspec Flush Joint pipes offer an economical solution where a hydraulic joint seal is not required.

■ Hyspec Flush Joint pipes utilise an external band joiner (e-band) to provide a soil tight joint.

■ price per metre includes the e-band joiner.

■ please refer to technical literature for additional information.

■ manufactured using the centrifugal spinning process.

hy

nd

s C

on

Cr

et

e P

iPe

Pr

iCe

Ca

talo

gu

e J

AN

uA

ry

2013

9

Flu

sh

Jo

int


0600FJyHys 600mm x 2.4m 0.698 $767.80 $342.63

0675FJyHys 675mm x 2.4m 0.847 $931.70 $411.88

0750FJyHys 750mm x 2.4m 0.977 $1,074.70 $477.38

0900FJyHys 900mm x 2.4m 1.302 $1,432.20 $630.21

1050FJyHys 1050mm x 2.4m 1.668 $1,834.80 $824.88

1200FJyHys 1200mm x 2.4m 2.031 $2,234.10 $996.60

1350FJyHys 1350mm x 2.4m 2.72 $2,992.00 $1,318.02

1500FJyHys 1500mm x 2.4m 3.166 $3,482.60 $1,528.50

1650FJyHys 1650mm x 2.4m 3.86 $4,246.00 $1,852.90

1800FJyHys 1800mm x 2.4m 4.765 $5,241.50 $2,275.54

2050FJyHys 2050mm x 2.4m 5.857 $6,442.70 $2,788.94

ClaSS 3 (Y)

ClaSS 4 (Z)

eXternal band joiner For FluSH joint PiPe


0600FJZHys 600mm x 2.4m 0.698 $802.70 $357.17

0675FJZHys 675mm x 2.4m 0.854 $982.10 $432.88

0750FJZHys 750mm x 2.4m 0.991 $1,139.65 $504.44

0900FJZHys 900mm x 2.4m 1.314 $1,511.10 $663.08

1050FJZHys 1050mm x 2.4m 1.675 $1,926.25 $862.98

1200FJZHys 1200mm x 2.4m 2.047 $2,354.05 $1,046.58

1350FJZHys 1350mm x 2.4m 2.738 $3,148.70 $1,383.31

1500FJZHys 1500mm x 2.4m 3.198 $3,677.70 $1,609.79

1650FJZHys 1650mm x 2.4m 3.884 $4,466.60 $1,944.81

1800FJZHys 1800mm x 2.4m 4.796 $5,515.40 $2,389.67

2050FJZHys 2050mm x 2.4m 5.878 $6,759.70 $2,921.02


eb0600 600mm - $54.50 -

eb0750 750mm - $56.80 -

eb0900 900mm - $71.00 -

eb1050 1050mm - $80.30 -

eb1200 1200mm - $144.90 -

eb1350 1350mm - $157.75 -

eb1500 1500mm - $171.25 -

eb1650 1650mm - $185.80 -

eb1800 1800mm - $200.95 -

eb2050 2050mm - $219.80 -

hy

nd

s C

on

Cr

et

e P

iPe

Pr

iCe

Ca

talo

gu

e J

AN

uA

ry

2013

10

br

an

Ch

inFo

rM

at

ion Branches North Island

Whangarei 33 Kioreroa road P 09 438 7305 F 09 438 9624

Warkworth 59 morrison Drive P 09 425 9837 F 09 425 0581

Albany 6 Cowley place P 09 415 9259 F 09 415 9522

Avondale 88–98 patiki road P 09 820 0122 F 09 820 0174

Penrose 667 Great south road P 09 579 5605 F 09 571 0508

Manukau 32 Ormiston road, east tamaki P 09 273 3053 F 09 273 3483

Pukekohe 26 Nelson street P 09 237 1274 F 09 238 1950

Hamilton 256 maeroa road P 07 847 3193 F 07 847 2166

Tauranga 84–86 Newton street P 07 571 6955 F 07 571 7028

Rotorua 39–41 Depot street P 07 348 9394 F 07 348 0371

Taupo 105 tauhara street P 07 378 9915 F 07 378 3471

Te Kuiti Waitete road P 07 878 8326 F 07 878 3082

Palmerston North 847 tremaine Avenue P 06 357 2638 F 06 357 2142

New Plymouth 5a struthers place P 06 759 8157 F 06 759 8175

Hastings 1318 Omahu road P 06 879 8989 F 06 879 8987

Masterton 8 solway Crescent P 06 377 4474 F 06 377 4639

Masterton (O&S)

219 High street P 06 3700 700 F 06 378 2307

Kapiti Paraparaumu 7 birmingham street P 04 296 1125 F 04 297 2413

Petone 33 bouverie street P 04 568 0933 F 04 568 0935

Kaiwharawhara 119–125 Old Hutt road P 04 472 4172 F 04 472 4314

Nelson 17 elms street P 03 543 8330 F 03 543 8333

Blenheim 51 main street P 03 579 1332 F 03 579 1318

Amberley 200 Carters road P 03 314 8455 F 03 314 9060

Hornby 58 Hickory place, Hornby P 03 344 3500 F 03 344 3505

Bromley 145 maces rd, bromley P 03 376 4185 F 03 376 4087

Waimakariri 2 Wrights rd, Kaiapoi P 03 327 5820 F 03 327 5823

Branches south Island

Oamaru 15 tees street P 03 433 1094 F 03 434 3063

Dunedin unit 1, 4 strathallan street P 03 456 1577 F 03 455 1577

Cromwell 25 mcNulty rd P 03 445 4760 F 03 445 4764

Winton 207 Great North road P 03 236 6044 F 03 236 6045

Invercargill 205 bond street P 03 214 6470 F 03 214 6473

Lower

Upper

Capital

Central

Northern

branCH inFormation

hy

nd

s C

on

Cr

et

e P

iPe

Pr

iCe

Ca

talo

gu

e J

AN

uA

ry

2013

11

br

an

Ch

inFo

rM

at

ion

Capital region

Central region

upper south island

australia

lower south island

Hynds sales branch

Hynds Factory

northern region

8

9

10

1 Hygrade products Limited

2 Hynds environmental

3 Ordish & stevens

4 Waters & Farr

5 ppI Christchurch

6 Waters & Farr

7 Gillies metaltech

8 Hygrade Water Austraila



the hynds group of Companies

sub Company

hamilton

te Kuiti

Kapiti

Porirua 4

taupo

tauranga

hastings

brisbane

sydney

Masterton

Petone

blenheim

Cromwell

Winton

invercargill

dunedin

nelsonKaiwharawhara

rotorua

new Plymouth

Melbourne

Palmerston north

oamaru

3

7#

auckland

Christchurch

amberley

rangiora bromleyWaimakariri

hornby6

5

Whangarei

Pukekohe

Warkworth

Manukau

avondale

albany

Penrose1

east tamaki2

1. APPLICABILITYUnless otherwise agreed in writing by Hynds, all quotes given by Hynds, and supply of Goods by Hynds to the Customer are governed by these terms and conditions to exclusion of all other terms and conditions or representations. These terms and conditions will not be deemed to be modified, cancelled or waived in whole or in part except by written amendment of Hynds. In these terms and conditions: “Hynds” means Hynds Pipe Systems Ltd and includes any of its divisions; “Customer” means any company, person or other body which orders or requests, either itself or through an agent, the supply of Goods from Hynds or makes an application for credit from Hynds in relation to any such supply; “Goods” means all products manufactured and distributed by Hynds for drainage, watermain, environmental and rural applications, including, without limitation, fabricated products, concrete spun pipe and precast products, clay pipe systems, streetware and associated systems, water and wastewater management products and systems, pumps, fittings, valves and hydrants, plastic, steel and iron pipes and all associated services and hireage; “GST” means goods and services tax. pursuant to the Goods and Services Tax Act 1985; "Guarantor" means any person or entity that at any time provides a guarantee to Hynds in respect of the Customer's obligations; "Insolvency Event" includes, in respect of any person, when that person commits an act of bankruptcy, makes an arrangement with any or all of its creditors for rescheduling of any indebtedness, has a receiver, liquidator or voluntary administrator appointed or is otherwise insolvent or deemed to be insolvent; “PPSA means the Personal Property Securities Act 1999; "Security Interest" means a security interest as defined in the PPSA and “Signatory” means any person signing an order or credit application for or on behalf of the Customer.

2. PRICESPrices and Price lists, with the exception of Hynds written quotations, are subject to variation by Hynds without notice prior to the confirmation of any order. Unless otherwise agreed by Hynds in writing, the price payable for the Goods is the price specified on the invoice for the particular delivery of Goods. Quotations may be withdrawn or modified by Hynds, at any time prior to receipt of written acceptance. Quotes are otherwise valid to the date stated on the Quotations Header, or for 30 days, and will lapse if not accepted in writing by the Customers within that time. All quotes must be kept confidential between the Customer and Hynds.

3. PAYMENT TERMS, CREDIT AND INTERESTUnless otherwise agreed in writing by Hynds, all Goods must be paid for in cash. If Hynds grants credit to the Customer the following terms shall apply.

a. Payments will be made in full without deduction or set-off no later than the 20th day of the month following invoice.

b. Should the Customer default in payment of any monies due to Hynds or in the performance of any other obligation which it owes to Hynds or any associated company or should any Insolvency Event occur in respect of the Customer or any Guarantor then:

i. All monies due by the Customer to Hynds shall immediately become due and payable. ii. Hynds may charge the Customer interest at Hynds then current bank overdraft rate plus

2% on all overdue amounts, from the date payment was due until payment in full. iii. Hynds may suspend further deliveries of Goods to the Customer until the Customer has

paid all monies due by the Customer to Hynds; and iv. Hynds may revoke all credit provided to the Customer and require that all further deliveries

be on a cash on or before delivery basis.c. Any expenses, costs or disbursements incurred by Hynds in recovering any outstanding monies

including debt collection agency fees or legal fees, shall be recoverable from the Customer.d. Hynds is entitled to request security from the Customer and shall be entitled to withhold the supply of

Goods or credit until such security has been obtained.

4. SET OFFThe Customer authorises Hynds, and any associated company, to apply (without prior notice or demand) any credit balance of the Customer on any account with Hynds or any associated company or any money owed by Hynds or any associated company towards satisfaction of any payment due and payable by the Customer to Hynds or any associated company. This clause is intended to be relied upon by both Hynds and each associated company.

5. RESERVATION OF TITLEAll Goods supplied by Hynds shall remain the property of Hynds until payment in full by the Customer of all amounts owing is received by Hynds. Until property in the Goods passes to the Customer, the Customer shall hold the Goods as a bailee and shall be liable to Hynds accordingly. If the Customer breaches any of these terms and conditions Hynds shall have the right (without giving notice) to retake possession of the Goods and the Customer authorizes Hynds or its representatives, servants, agents of employees to enter any premises upon which the Goods are stored for the purpose of retaking possession of the Goods. Hynds will have no liability to the Customer or any third party in relation to the entry, removal or repossession of the Goods pursuant to this clause and the Customer will indemnify Hynds against any claims, actions or costs that may arise as a result. In the case of Goods supplied under a Hynds Agreement for Hire, payment does not constitute transfer of property in the Goods, with title retained by Hynds.

6. WOODEN PALLET/DUNNAGEWhere wooden pallet/dunnage are supplied by Hynds, Hynds may require the Customer to purchase such pallets/dunnage for such an amount as shall be at the sole discretion of Hynds. All wooden pallets/dunnage supplied by Hynds remain the property of Hynds until the Customer has paid all amounts payable by the Customer to Hynds. The risk of loss of, or damage to such wooden pallets/dunnage passes to the Customer upon delivery to a carrier or to the Customer or nominee, as the case may be. Hynds may, in its sole and absolute discretion, permit the Customer to return purchased wooden pallets/dunnage for credit, provided the Customer provides proof of purchase of the wooden pallets/dunnage

7. PERSONAL PROPERTY SECURITIES ACT 1999a. The Customer must do all such things and execute or arrange for execution of all such documents as

Hynds may require to ensure that Hynds has a perfected first ranking security interest(s) in the Goods and any wooden pallets/dunnage supplied by Hynds.

b. Without limitation to paragraph a. of this clause the Customer grants to Hynds a security interest in all of its present and after acquired personal property as security for all obligations from time to time of the Customer to Hynds.

c. The Customer waives its right to receive a copy of any verification statement(s) under the PPSA and agree that as between Hynds and the Customer, the Customer will have no rights under (or by reference to) sections 114(1)(a), 116, 120(2), 121, 125, 129, 131, 133 and 134 of the PPSA. Immediately upon request by Hynds the Customer must (at the Customers cost) procure from any person considered by Hynds to be relevant to its security position such agreements and waivers as Hynds may at any time require.

8. TAXESGST and any duty or other tax, levy or impost on or relating to the Goods, is payable by the Customer to Hynds upon demand, in addition to the price of the Goods.

9. CLAIMSHynds shall not be liable in respect of any claim for defective Goods unless such claim is notified to Hynds in writing within 7 days of delivery of the Goods. The liability of Hynds for defective Goods shall be limited to an amount not exceeding the purchase price of the defective Goods. Hynds will not otherwise be liable for any loss or damage (including direct or consequential loss, or loss of profits) incurred by the Customer or any third party as a consequence of the Goods being defective. Hynds will not in any circumstances be liable for any loss of damage caused by wilful or accidental damage, negligent or improper use, maintenance or storage or any other circumstances whether or not beyond Hynds’ control.

10. CREDITS"When Goods are supplied as ordered, the Customer does not have the right to return the Goods. However, Hynds may, at its sole and absolute discretion, permit the Customer to return Goods for credit, on the understanding, expressed or otherwise, that a handling fee of up to 15% of the purchase price of the Goods, plus any freight charges, plus GST, may be deducted from the value of the credit. No Goods will be accepted back unless they are returned to Hynds in first class resaleable condition, accompanied by adequate proof of purchase."

11. DELIVERYHynds will use reasonable endeavors to deliver Goods ordered within a reasonable time. Delivery dates are estimates only and Hynds shall not be liable for any damage or loss arising out of delay in delivery. All risks in respect of the Goods will pass to the Customer on delivery to a carrier or to the Customer or nominee as the case may be. If Hynds is requested to store Goods, or if Hynds is required to store Goods because of the fault of the Customer after the Goods are ready for despatch, the Customer shall pay all charges of and incidental to such storage. Such storage will be at the Customer’s risk, and will not entitle the Customer to postpone payment of any sums due to Hynds. A receipted consignment note, bill of lading weigh bill or despatch advice, shall be conclusive proof of delivery unless otherwise stated, delivery costs will be paid by the Customer. Transit insurance to the Customer’s account can be arranged by Hynds if requested by the Customer. Hynds shall not be liable to the Customer or any third party for short delivery, or loss in transit of the Goods. Any deliveries necessitating delivery outside the hours of 7.30am – 4.00pm on weekdays must be by special arrangement. Where the Goods are delivered by Hynds direct to the Customer or nominee, the Customer shall provide at its expense, safe hard roading suitable for use by usual road transport to deliver materials to the site specified by the Customer or to an area alongside such site, with sufficient clear hard space at all times for unloading and stacking and unless otherwise specified, shall supply all necessary cranes and other unloading facilities.

12. ORDERSOrders of Goods may be verbal or written. Hynds will not be liable for any error in the Customers order and the Customer will be responsible for errors arising out of verbal orders not confirmed in writing. Cancellation of orders for Goods placed with and accepted by Hynds may be made only with the written consent of Hynds. Hynds will not be liable for any loss or damage suffered by the Customer or any third party as a result of cancellation of an order.

13. CONFIDENTIALITYAll drawings, designs, specifications, technical data and other information which Hynds supplies in connection with a quotation, or order are confidential. All such information remains Hynds’ property, and must not be disclosed to any third person without our written permission and shall be returned immediately upon Hynds’ request.

14. INTELLECTUAL PROPERTYIf Goods are supplied to the Customer’s designs or specifications the Customer warrants that none of its designs or specifications infringe any copyright, patent or other intellectual property right. If the Customer’s designs or specifications infringe, or are alleged to infringe any patent, registered design, copyright or other intellectual property rights, the Customer will indemnify Hynds for any liabilities incurred by Hynds as a result of the Customers breach of this clause.

15. TESTINGIf the Customer requires any Goods or material samples to be specially tested prior to delivery, arrangements may be made for the carrying out of such tests at the Customer’s cost.

16. CUSTOMER MATERIALSIf the Customer supplies Hynds with its own materials for use in completing the Goods, the Customer undertakes that such materials will be in all respects suitable for the operation for which they are supplied. The Customer will at its own expense replace materials which in Hynds’ opinion are unsatisfactory and will pay Hynds for the cost of work already carried out on such materials and for the cost of any damage incurred by Hynds as a result of such materials being unsatisfactory. Such materials remain the property of the Customer whilst in Hynds possession. The risk of loss of, or damage to, such materials will at all times be borne by the Customer.

17. INVENTORY CONTROLIf Goods are required at the request of the Customer prior to SEVEN (7) day strength being attained, Hynds shall not be liable for any defect or failure in the Goods and the Customer shall indemnify Hynds against any claims made in respect of any such defect or failure.

18. FARM GRADE/SECOND GRADE GOODSFarm grade/second grade Goods are sold as such and marked accordingly. Under no circumstances should farm grade and/or second grade Goods be used as a substitute for first grade Goods and Hynds shall not be liable for any loss or damage caused by such substitutions or attempted substitutions.

19. FORCE MAJEUREHynds will not be liable to the Customer if delivery of the Goods is prevented or delayed, by reason of any circumstances beyond Hynds’ reasonable control.

20. CONSUMER GUARANTEES ACT 1993The Customer agrees that where it is buying the Goods for the purposes of a business the Consumer Guarantee Act 1993 does not apply. The implied conditions under the Sale of Goods Act 1908 do not apply to the supply of Goods by Hynds to the Customer.

Terms and Conditions of Supply

Hynds Pipe Systems Limited PO Box 58142, Botany, Auckland 2163, New Zealand

P +64-9-274 0316 F +64-9-272 7485 www.hynds.co.nz

ConCrete PiPePriCe Catalogue

september 2013

0800 we PiPe (93 7473) www.hynds.co.nz

concrete pipe price catalogue - hynds pipe … pipe...hynds pipe systems is the largest operating...

Documents