CCCCCONONONONONCRETECRETECRETECRETECRETE HOPPER HOPPER HOPPER HOPPER HOPPER“Star Attachments Turn a Forklift into a Whole Fleet of Equipment”

Places Concrete in “Hard to Reach Areas”

Saves the Additional Cost of a Pump or Crane

Saves Time - Lets You Place Concrete When You Are Ready

TTTTTurururururns yns yns yns yns your four four four four forororororklifklifklifklifklift intt intt intt intt into ao ao ao ao a Concrete PlacerConcrete PlacerConcrete PlacerConcrete PlacerConcrete Placer

REDUCESREDUCESREDUCESREDUCESREDUCES

CONCRETE CONCRETE CONCRETE CONCRETE CONCRETE

PLA PLA PLA PLA PLACEMENTCEMENTCEMENTCEMENTCEMENT

COSTSCOSTSCOSTSCOSTSCOSTSBY

UTILIZING

YOUR

JOBSITE

FORKLIFT

Places concrete efficiently in these and many other applications: COLUMNS WALLS PIERS BEAMS

STAIRS & LANDINGS MASONRY WALL GROUTING POURS WITH OVERHEAD OBSTRUCTIONS

FOUNDATIONS REHAB PROJECTS ELEVATED DECKS SLOPE PAVING

LIPPERT BROS. INCSTADIUM EXPANSION PROJECTOKLAHOMA STATE UNIVERSITYSTILLWATER, OKLAHOMA

HEAHEAHEAHEAHEAVY DUTVY DUTVY DUTVY DUTVY DUTYYYYY

800-541-1797 or 817-485-6073

NOWAvailable with

HYDRAULICS

4101 Garland Dr. Ft. Worth, TX 76117Ph. 817-485-6073 Fax 817-428-6008USA & Canada Toll Free 800-541-1797

www.starindustries.comBulletin: CH 0204

Universal Fit (slip-on-the-forks) Designpermits use on both straight-mast andextendable-reach type forklifts. Accepts up

to 7" wide forks.

Swivel Chute Included - 30" effective length,swings 40 degrees (20 degrees to each side),slope of chute adjustable with chain.

Discharge Gate can be controlled manuallyor by optional hydraulics. Handle can bepositioned on either side.

Heavy Duty Construction - built with heavygauge steel - all welded construction.

Simple to Install - Forks are inserted fully intothe fork channels then a locking pin is simplyinstalled behind the heel of each fork. Pins areattached with a chain to prevent loss.

S P E C I F I C AT I O N S

Note: Dimensions are the same for all models except as noted.

4101 Garland Dr., Fort Worth, TX 76117Ph 817-485-6073 Fax 817-428-6008USA & Canada Toll Free 800-541-1797www.star industr ies.com

MODEL CAPACITY EMPTYWEIGHT

1550 ½ cuyd 650 lbs.1575 ¾ cuyd 770 lbs.

MANUAL Dump

MODEL CAPACITY EMPTYWEIGHT

1550H ½ cuyd 700 lbs.1575H ¾ cuyd 820 lbs.

HYDRAULIC Dump

Easy to Clean-Up

Simple to Useeeee

Front ViewShown w/o chute Side View

Shown with chute @ 25º slope

Mod. 1550 = 46"Mod. 1575 = 49"

51"

65 ¼"30 ½"

Mod. 1550 = 44"Mod. 1575 = 48"

8" I.D.

39 ½"

48 ¾"

Mod. 1550 = 44"Mod. 1575 = 48"

Optional TREMEE (elephant trunk) adapter available