concrete chain saws - sierras de cadena perforadoras de concreto
TRANSCRIPT
-
8/2/2019 Concrete Chain Saws - Sierras de Cadena Perforadoras de Concreto
1/6 1-800-700-5919 Visit our Web site at www.csunitec.com
CONCRETECHAINSAW
S
24
Concrete Chain SawsConcrete Chain Saws
Cut through walls, floors and columns in a single pass
Specifically designed for the demandingrequirements of professional sawing anddrilling contractors
Now with AirFORCE F4 Diamond chain optimized for use with pneumatic saw
Deep plunge cuts up to 15" deep
Square corners up to 14" with no overcuts
Cut mechanical openings and irregular shapes
Easily cut through reinforced concrete, brick,block, concrete pipe and natural stone
Durable industrial finish on die-cast aluminumbody stands up to harsh environments
Built-in Wallwalkerprovides leverageadvantage to makecutting easier
Optimized for pneumatic chainsawing
Model CS 536163-26.5 HP Air Motor
PneumaticHydraulic
CS Unitec Offers 2 Types of
Concrete Chain Saws to MeetYour Cutting Requirements:
CS 536163 Pneumatic High torque output for tough
cutting jobs
Powerful 6.5 HP air motor
No gas or engine fumes ideal for confined spacesand indoor use
Noise level: 88 dB at 3 feet
(approx. 1 meter) Weight: 29 lbs. (without bar and chain)
CS 526822 Hydraulic Dependable, powerful
11 HP motor
Hydraulic power for heavy-dutymining, utility, marine andconstruction applications
Weight: 25 lbs. (without bar and chain)
Please see page 26 forConcrete Chain SawAccessories, including:
Diamond ChainsGuide BarsSpeedHook
And More!
Plunge cut up to 15" deep!
AirFORCEF4
Diamond Chains
http://www.csunitec.com/spanish/concretesaws/sierra.html
http://www.csunitec.com/spanish/concretesaws/sierra.html -
8/2/2019 Concrete Chain Saws - Sierras de Cadena Perforadoras de Concreto
2/6 1-800-700-5919 Visit our Web site at www.csunitec.com
CS 536163-1
CS 536163-2
CS 526822-1
CS 526822-2
6.5 HP
6.5 HP
11 HP
11 HP
Power
124 CFM @ 90 PSI (6 bar)
124 CFM @ 90 PSI (6 bar)
8 GPM @ 2500 PSI (172 bar)
8 GPM @ 2500 PSI (172 bar)
32
33
28
29
104
104
95
95
88 dB
88 dB
88 dB
88 dB
Motor Specifications
5700 RPM
5700 RPM
5700 RPM
5700 RPM
No LoadSpeed
Weight w/Bar andChain
No LoadTorque(in.-lbs.)
NoiseLevelat 3 ft.
10"
15"
10"
15"
Max.Depthof Cut
Model No.
Concrete Chain SawsConcrete Chain Saws
Rugged construction for demanding applications
Pneumatic Concrete Chain Saw
Hydraulic Concrete Chain Saw
Above: OptionalSpeedHookguidessaw for straightcutting (see page 26).
Model CS 52682211 HP Hydraulic Motor
FORCE F4Diamond Chains
-
8/2/2019 Concrete Chain Saws - Sierras de Cadena Perforadoras de Concreto
3/6
ECO50-T and ECO50-TAKElectric and Hydraulic
Reversible motor for drilling and tapping applicationsCutter
capacity2" dia.
CONCRETECHAINSAW
ACCESSORIES
26 1-800-700-5919 Visit our Web site at www.csunitec.com
AirFORCE Standard
General-purposeDiamond Chain10" Part No. 53616615" Part No. 536167
AirFORCE AbrasivePRO
For cutting soft,abrasive material10" Part No. 53174715" Part No. 525344
Concrete Chain Saw AccessoriesConcrete Chain Saw Accessories
Make your concrete chain saw work for you
1.
Three options for cutting
Guide BarsGuide Barswith internal water feed10" Guide BarPart No. 529829
10" cutting capacity
9" depth of square cut
Accommodates a 25segment Diamond Chain
15" Guide BarPart No. 523080
15" cutting capacity
14" depth of square cut
Accommodates a 29
segment Diamond Chain
AirFORCE Premium
For cutting concretewith steel reinforcement10" Part No. 53616415" Part No. 536165
10" chain has 25 segments for 10" max.cutting depth, 9" square corners
15" chain has 29 segments for 15" max.cutting depth, 14" square corners
Match the Diamond Chain tothe material or application:
2. 3.
SpeedHookSpeedHook
Guides the saw for straight cuts
SpeedHookComplete KitPart No. CS 70552
(includes SpeedHook
42" rail,1 saw adapter and 1 axle)
Quickly and easily attachesto wall with anchors
Guides saw for straight cuttingthrough reinforced concrete,brick, block and natural stone
Note: Reduces cutting depthby 3"
AirFORCEF4Diamond Chains
-
8/2/2019 Concrete Chain Saws - Sierras de Cadena Perforadoras de Concreto
4/6
ECO32-T and ECO32-TAKECO32-T and ECO32-TAK
Reversible motor for drilling and tapping applicationsCutter
capacity11/4" dia.
1-800-700-5919 Visit our Web site at www.csunitec.com
Maximize Diamond Chain life with these hints
The cutting life of the chains is not guaranteed. There aremany variables from job to job, including hardness of concrete,which make it impossible to accurately predict chain life.*These numbers are rough, starting point estimates only, notfor bidding purposes. Please refer to Operator's Manual forproper safety precautions.
Concrete Diamond Chain LifeConcrete Diamond Chain Life
Factors negatively affecting chain life: Steel reinforcing many pieces of large diameter rebar cause reduced life Aggregate hardness harder aggregates cause reduced life Operator experience first-time users generally get less chain life
Cutting tips to improve chain life: Use minimum of 20 PSI water pressure Always cut at full throttle slowly plunge into wall
and push hard enough to cause the RPMs to drop by 25% to 30% Always apply steadyfeed force Slowlyrock the bar and chain into the cut using Wallwalker
as a pry point Reduce arm motions hold saw close to body, using legs and body to apply
feed force; always cut with saw between shoulders and knees, preferably at waist height If saw begins to drift off the intended cut line, pull out and restart cut
Estimated chain life for AirFORCE Premium 29 segment chain (Part No.CS 536164-15) is approximately 600 in.-ft. in concrete with up to5/8" rebar.
Wall Thickness6 inches
8 inches
10 inches
Lineal feet in common wall thickness*:
Lineal Cutting Feet100 feet
75 feet
60 feet
8"
7'
3'
How to calculate inch-foot (in.-ft.)An inch-foot (in.-ft.) is equal to the Depth of Cut
in inches x Length of Cut in feet.This measurementis used to determine chain or blade life.
For example:Calculate how many in.-ft. are in this doorway.
1. Determine the Depth of Cut in inches.For this example, it is 8 inches.
2. Determine the Length of Cut in feet.3 + 7 + 3 + 7 = 20 feet.
3. Multiply the two numbers.8 in. x 20 ft. = 160 in.-ft.
Note for metric users: 1cm = .3937 inches and 1 meter = 3.2808 ft.
Removes moisture and dirt from air lines; a float valveautomatically ejects water and dirt
Includes automatic oiler; prevents tools from freezing incold environments
Eliminates air motor downtime caused by water and dirt
Connections for two tools, max. air flow 185 CFM
AirPacAirPacExtends life of pneumatic power tools see page 29 for more information
Model CSAP-2
-
8/2/2019 Concrete Chain Saws - Sierras de Cadena Perforadoras de Concreto
5/6
PNEUMATIC
CUT-OFFSAW
S
28 1-800-700-5919 Visit our Web site at www.csunitec.com
Pneumatic Cut-off SawsPneumatic Cut-off Saws -Hand-held and Walk-behind
Cut concrete, asphalt, masonry, steel and more
Hand-held Cut-off Saws, 14" and 18" Wet or dry cutting of concrete, reinforced
concrete, asphalt, masonry, steel and more
Cut up to 7" deep with no gas or engine fumes
Low maintenance no belts, pistons, fuel linesor carburetors
Accept diamond or abrasive blades
Adjustable blade guard with built-in water connection
In-line oiler for motor lubrication
1" arbor size, 1/2" NPT air connection
Walk-behind Cut-off Saw 20" Capacity Wet or dry cutting of concrete, asphalt
and other materials
Cut up to 7" deep with no gas or engine fumes
Low maintenance no belts, pistons,fuel lines or carburetors
Designed for tough cutting jobs, including jointsawing, floor sawing, trenching, road repair andplant maintenance
9.5 HP pneumatic motor with gearbox drive
Rugged steel construction yet only 107 lbs.
Built-in water connection for wet cutting
Built-in oiler for motor lubrication Optional water tank kit
Power
RPM (No Load)
Max. Depth of Cut
Max. Blade Capacity
CFM @100 PSI
Drive
Weight
9.5 HP
2900
7"
20"
92
Gearbox
107 lbs.
Model CSR 150
Cut-off Saw with12" abrasive blade
14" Cut-off Saw with diamond blade
Built-in3/4" waterconnection
1/2" NPT AirConnection(works on
both left andright side)
Adjustable crank handleto raise andlower blade
High-torqueoutput gear box
3/4" WaterConnection
1" arborWeighs 107 lbs.
Pointer
CSH 100
CSH 125
CSH 150
5 HP
9.5 HP
9.5 HP
Power
5250
3200
3200
RPM(No Load)
Max.Depthof Cut
4"
5"
7"
90
92
92
Direct
Gearbox
Gearbox
CFM @100 PSI
14
14
18
Max.Blade
Capacity
22
26
28
DriveWeight(lbs.)
ModelNo.
-
8/2/2019 Concrete Chain Saws - Sierras de Cadena Perforadoras de Concreto
6/6 1-800-700-5919 Visit our Web site at www.csunitec.com
AirPacAirPac
Air Tool LubricantAir Tool LubricantNon-toxic
Removes 98% of water andcontaminants from both portableand stationary compressed airsystems to protect pneumatic tools
Totally automatic a float valveautomatically ejects theaccumulated water and dirt
Maintenance-free no filters orparts to replace or service
Includes automatic 1/2 pint oiler;prevents tools from freezing in coldenvironments
Two tool outlets; Chicagocouplings on all connections
Weighs 40 lbs., max. air 185 CFM
Use Air Tool Lubricant for bestresults see below for moreinformation
How it Works:
Air compressors compress air into smallareas this causes heat, which containsmoisture
As heated air travels through air lines, itcools, creating water droplets
When this air/water mixture enters theAirPac, it travels through a baffle that trapsthe water and dirt and drops it into aholding area
When enough water is accumulated, a floatallows the water and dirt to beautomatically ejected
Dry air then enters the lubricator and ismixed with oil and sent to the tool
CS Unitec offers three types:
ProLube-ATL: A super-premiumsynthetic air tool lubricant. Providesmaximum lubrication, cleaning andprotection for portable air tools.
ProLube-ATL/AF (anti-freeze):ProLube-ATL/AF blend that preventsfreezing and is ideal for operating airtools in cold climate conditions.
Air Tool Line Conditioner:For use in underwater air tools.Displaces moisture. Developed toinhibit rust and corrosion of air motors.
Extends life of pneumatic power tools
ProLube-ATL
1 gallon bottleOrder No.
CS 7043-001
Case (4 bottles)Order No.
CS 7043-002
1 gallon bottleOrder No.CS 7049-001
Case (4 bottles)Order No.CS 7049-002
ProLube-ATL/AF
1 quart/liter bottleOrder No.MS 9105
Air Tool Line Conditioner
Model CSAP-2