concept v2.5 lesson 16 objectives: after completing this lesson, the learner will be able to: ...
TRANSCRIPT
Concept V2.5
Lesson 16 Objectives:After completing this lesson, the learner will be
able to: Program, download and test logic using the LD
Editor. Demonstrate an understanding of LD Logic.
Concept V2.5
Creating a Ladder Diagram Section
Concept V2.5
Ladder Diagram Editor Example
Concept V2.5
Ladder Diagram Programming Objects
Concept V2.5
Connecting Objects
All contacts can be connected in sequence (AND-BOOL)
All contacts can be connected in parallel (OR-BOOL)
All contacts can be connected in both, parallel and sequence
The network must be connected to the power rail
The power rail refers to the data type BOOL
FFB's can be inserted at any position of the network
Coils have to be connected to contacts or FFB-outputs
The right and left side of a coil always has the same value!
At coils with negation or transition the value will be stored in the associated variable
Vertical short must be used for parallel connection
Concept V2.5
The Toolbar
Concept V2.5