concept catalogue - engineering components
DESCRIPTION
Engineering Components Catalogue-hinges--gas struts--drawers sliding rails-TRANSCRIPT
Latches and Handles 02FOLDING T HANDLE 02FLUSH LOCKING LATCHES 03QUARTER TURN LATCHES 04SWING HANDLE LATCHES 05T HANDLES 08L HANDLES 10CAm & ROD ACCESSORIES 12 PADDLE HANDLES 18SLAm LATCHES 20SPRING BOLT LATCHES 22COmPRESSION LATCHES 24ELECTRONIC ROTARy LATCHES – SOUTHCO 26ROTARy LATCHES - EBERHARD 28COmPRESSION LATCHES - SOUTHCO 32PUSH TO CLOSE LATCHES - SOUTHCO 35BALL/mAGNETIC CATCH 37
Hinges 39BUTT HINGE 39PIANO HINGE 40PLASTIC HINGE 41LIFT OFF HINGE 42PINTLE HINGE 44PANEL CUTOUT HINGE 46CONCEALED HINGE 47BULLET HINGE 49DIECAST HINGE 50POLymIDE HINGE 53POSITION CONTROL HINGE 54CONSTANT TORQUE HINGE 56SPRING LOADED HINGE 57SNAP-IN HINGE 57
miscellaneous 58LOCKS:
CAm LOCKS - SOUTHCO 58PINCHWELD 61HANDLES 64LASHING RINGS/ANTI-LOOSE 66ADJUSTABLE OVER CENTRE LATCHES 67ADHESIVE FOAm 68BI-FIX QUARTER TURN FASTENERS 69DZUS FASTENERS 70COVERSTAyS 72
ACCURIDE BALL BEARING SLIDES 75ROLLON 97
COmPACT RAIL 97TELESCOPIC RAIL 103
EBERHARD AUTOmOTIVE HARDWARE 107FRIGERIO ETTORE S.p.A. TOGGLE LATCHES 117PIVOT POINT NON-THREADED FASTENERS 131RENCOL KNOBS, HANDLES, CONTROL WHEELS, INDEXING PLUNGERS 147STABILUS GAS STRUTS 179
CONTENTS
2 FOLDING T HANDLE Latches and Handles
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Folding T Handle 10502SS-1 with Stud Mounting
Folding T Handle 10502SS
Folding T HandleHeavy Duty with Offset10502SS-9
3FOLDING T HANDLELatches and Handles
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Flush Locking Latch10603
Flush Locking Latch10602
Folding T Handle - Non-Locking10507
1, 2 and 3 Point LatchBlack ABS receptacle and diecast handle
3 Point LatchZinc Diecast - Black Painted
4
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
GRIP
45 (1.77)
CAM
23 (.91)
0.5
(.02)
SEA
LIN
G W
ASH
ER (C
OM
PR
ESSE
D)
SCREW M6 THREAD 4 (.16)
MOUNTING NUT
28 (1.10)
5 (.20)
QUARTER TURN LATCHES Latches and Handles
CL 118 Double Bit (3mm or 5mm)
SL 118 Slotted
SQ 118-1 Square Slotted
SQ 118 Square Slotted (7mm or 8mm)
TL 118 Triangle (7mm or 8mm)
TL 818 Teardrop
CAM STYLE GRIP
T001 STRAIGHT 18mm
T002 OFFSET 20mm
T003 OFFSET 24mm
T004 OFFSET 29mm
T005 OFFSET 32mm
T006 STRAIGHT HOOK -
5
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Latches and Handles SWING HANDLE LATCHES
Cam & Rod Accessories see page 12-17
Diecast Swing Handle 1222-01-10
Plastic Swing Handle 1101-1001-C
6 SWING HANDLE LATCHES
Latches and Handles
Rod Control for Plastic Swing Handle 1190-02
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
7
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Latches and Handles SWING HANDLE LATCHES
Diecast Swing Handle 1220-02-10
Stainless Steel 304 Swing Handle 1205-304
Cam & Rod Accessories see page 12-17
8
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
T-HandleT308L-762 & T308L-762-CW
T-HandleA-103K
T HANDLES Latches and Handles
T-Handle1317-00-10
53 76
9
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Latches and Handles T HANDLES
T-Handle6604101
T-HandleT101
Pop Up, Lockable T-HandleT302
10
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
L HANDLES Latches and Handles
L-Handle0.26.0719.0
L-HandleB-120-L – Pad Lockable
11
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Latches and Handles L HANDLES
Diecast Padlockable0.26.0628.00
Diecast L Handle 1319-10-10
12
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
CAM & ROD ACCESSORIES
Latches and Handles
Cams - 9100
13
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Latches and Handles CAM & ROD ACCESSORIES
9100-2518
Single Point Cam
3-Point Cam
14
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
CAM & ROD ACCESSORIES
Latches and Handles
3-Point Cam 9100-4501-8800
Keys - 9200
Key Type L=85mm L=70mm L=55mm
Nuts - 9501
Material
15
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Latches and Handles CAM & ROD ACCESSORIES
Rods - 9301
16
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
CAM & ROD ACCESSORIES
Latches and Handles
Rod Adapter - 9405-01
Rod Catch - 9401-4026
Rod Catch - 9401-4024
17
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Latches and Handles CAM & ROD ACCESSORIES
Rod Guide
Black PA Rod Guide
Long size
For weld studM6x16 or M6x20
For weld studM5x12
9401-4430
9401-3825
9401-2622
9401-2518
18
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
PADDLE HANDLES Latches and Handles
Paddle Handle Stainless Steel (Small)10407
Paddle Handle Stainless Steel (Small, non-locking)10408
Paddle Handle Stainless Steel (Large)10409
19
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Stainless Steel Paddle Handle (multi-point)10411
Stainless Steel Paddle Handle (multi-point, non-locking)10412
Paddle Handle Stainless Steel (large, non-locking)10410
Latches and Handles PADDLE HANDLES
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
20
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
RTH-00003
10402
10403
SLAM LATCHES Latches and Handles
SL21062NR
4.7mm diameter
5.1mm
10-18mm34.1mm
12mm
41.2
mm
33.6mm
19.32mm 8mm
24.72mm
63.36mm 6.42mm
38.4
mm
33.9
5mm
63.36mm
21
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
ORDERING CODE GRIP (mm) DIMENSIONS (mm)
A B C D E F G
A30 /1.2 1.2-1.6 6.4 57 15 28 25 47 13 2
A30 /1.6 1.6-2.0 6.4 57 15 28 25 47 13 2
A30 /2 2.0-2.4 6.4 57 15 28 25 47 13 2
PANEL THICKNESS
TOTAL GRIP
ORDERING CODE GRIP (mm) DIMENSIONS (mm)
A B C D E F G
A55 / 1.2-1.6 1.2-1.6 2.2 73 22.5 42 15 57 18.5 4
A55 / 1.6-2.0 1.6-2.0 2.2 73 22.5 42 15 57 18.5 4
PANEL THICKNESS
TOTAL GRIP
ORDERING CODE GRIP (mm) DIMENSIONS (mm)
Latches and Handles SLAM LATCHES
A90
A30
A55
The A90 Series of Slam Latches are designed for use in commercial, domestic or other applications, which require a reliable and inexpensive slam latching hardware. The uniquely designed latch can make the difference.
The A30 Series of Slide Latches are designed for use in commercial, domestic or other applications, which require a reliable and inexpen- sive slide latching hardware. The uniquely de- signed latch can make the difference for your product presentation and functionality.
The A55 Series of Slam Latches are designed for use in commercial, domestic or other applications, which require a reliable and inexpen- sive slide latching hardware. The uniquely de- signed latch can make the difference for your product presentation and functionality.
A B C D E F G
A90 /1.2-1.6 1.2-1.6 23 114 37 56 20 90 34 3
A90 /1.6-2.0 1.6-2.0 23 114 37 56 20 90 34 3
A90 /2.0-2.4 2.0-2.4 23 114 37 56 20 90 34 3
PANEL THICKNESS
TOTAL GRIP
22
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
RTH-00002
RTH-00004
SPRING BOLT LATCHES Latches and Handles
F6-20-SIA50Wl (WR)
H1002W1-3W1
LEFT HAND RIGHT HANDMaterial: Zinc plated steel
Material: Zinc plated steel
Material: Zinc plated steel
Material: Zinc plated steel
23
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
H00117-2RH & H00117-2LH
RIGHT HAND SHOWN
Latches and Handles SPRING BOLT LATCHES
H00117-RH & H00117-LH
RTH-00005
D12-A
Material: Zinc plated steel
Material: Zinc plated steel
Material: Zinc plated steel
Material: SS304
24
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
TYPE CODE “A” SIZE “B” SIZE LOCK
10207A 1~15 13.5 with lock
10207B 15~30 28.5 with lock
10207C 1~15 13.5 no lock
10207D 15~30 28.5 no lock
10207 - Compression Latch (Large 102.8 x 50)Available in black or chrome
10208 - Compression Latch (Small 80.2 x 35.2)Available in black or chrome
COMPRESSION LATCHES Latches and Handles
TYPE CODE “A” SIZE “B” SIZE LOCK
10208A 1~25 13.5 with lock
10208B 15~30 28.5 with lock
10208C 1~25 13.5 no lock
10208D 15~30 28.5 no lock
Features: • Core Removable • Master Key System • 5 or 10 wafers mechanism reversible or double
bit key available with dust shutter. • Thickness of application plate: 1~4mm • Available in chrome plated and powder coated • Chrome plated, pearl chrome, plated and
powder coated available.
Features: • Core Removable • Master Key System • 5 or 10 wafers mechanism reversible or double
bit key available with dust shutter. • Thickness of application plate: 1~4mm • Available in chrome plated and powder coated • Chrome plated, pearl chrome, plated and
powder coated available.
25
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Latches and Handles COMPRESSION LATCHES
Technical data:200,000 cyclesPower: 7.868 lbfCurrent Absorption: 4.5 A (mAX)Temperatre Range: -18.4 F to +188.6 F
Ergo Handle - Whaletail T Handle18400 Series
• Designed to fit most existing T-Handle cut-outs
• Ergonomic handle design for a large grip
• Water resistant construction
• Built in cylinder cover hidden below handle grip
• Blind mounting bracket • Available for: Power (remote) locking - #18431 Non-Power locking - #18430
Components for Ergo Handle Power-up Locking Kit:
1. Rod Adapters 16619-15PK-152. Handle Rods 16720-3-253. Handle Pins & Washers 18400-P5-254 Backing Plates5. Power-Up Actuator16720-1-01
26
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
ELECTRONIC ROTARY LATCHES
Latches and Handles
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
R4 EM Electronic Rotary Latch Electronic access
• Push-to-close, electronic release• Versatile rotary mechanism• Concealed latching• Microprocessor control• High strength
• Minimal power draw• Simple mechanical override• Optional internal microswitch for
latch open/close output signal
The R4-EM Electronic Rotary Latch provides a simple, versatile electromechanical latch solution for a variety of applications. Add an 8-26 Volt DC power supply and any access control device to the R4-EM for a secure, concealed electronic access solution. The optional internal microswitch provides an output signal to remotely monitor latch status or control external systems.
The efficient DC gear motor driven system releases the rotary cam under heavy loads with minimal power consumption.
The proven rotary mechanism provides push-to-close convenience and a secure closure.
Convenient mechanical override feature for manual release in case of power failure. Contact Southco for manual release cables and mounting brackets
27
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Latches and Handles ROTARY LATCHES
R4 EM Electronic Rotary Latch Electronic access
Material & FinishMechanism Housing: Steel, zinc plated Cam, trigger: Steel, zinc plated Springs: 300 Series stainless steel Pins: Steel, zinc platedElectronic Actuator: Housing: PC/ABS Cam / follower: Acetal
Electrical SpecificationsRecommended Operating Voltage: 8 to 26 Volt DC Typical Operating Current: Less than 500mA at 12 VDCPeak/Stall Operating Current: 1 AStandby Current: 185uAInput Signal Current Draw: 25mAOptional *microswitch closes upon latch closureMicroswitch Rating: 3A at 12VDC Max.
Wire Colour Code / Connector Pin Assignment:PIN 1: Brown: Ground (-)PIN 2: Red: Power 8 to 26 Volts DC PIN 3: Orange: Control Signal 8to26VoltsDC PIN 4 Black: Microswitch Common PIN 5 Blue: Microswitch N.O. ContactPIN 6 Grey: Microswitch N.C. Contact
Wire Length: 150mm with connector, 430mm without connector
28
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
ROTARY LATCHES Latches and Handles
Compact Rotary 200
8-140 R & L Micro Rotary
240 Mini Rotary Latch
29
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Latches and Handles ROTARY LATCHES
1-240 Mini Rotary Latch
8-240 Mini Rotary Latch
240-52U Mini Rotary Strike Latch
30
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
ROTARY LATCHES Latches and Handles
475-52U Strike Rotary Latches
1-400 Rotary Latches
1-475-R&L Low Profile Rotary Latch
31
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Latches and Handles ROTARY LATCHES
9D 400-UR&L Dovetail Rotary Latch
2T-400-52 Strike Rotary Latch
12-450 Rotary Latch
32
E3 Vise Action, Tool Operated Latch
COMPRESSION LATCHES
Latches and Handles
• Easy grip adjustment• Tool operated for security• Zinc alloy, powder coated or chrome plated and steel,
zinc plated
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Assorted head options
33
E3 Vise Action, Hand Operated Latch
• Easy grip adjustment• Hand operated• Zinc alloy, powder coated or chrome plated and steel, zinc plated
Latches and Handles COMPRESSION LATCHES
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Assorted head options
34
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
COMPRESSION LATCHES Latches and Handles
E3 Vise Action, Wing Knob Latch
• Easy grip adjustment• Multiple key codes• Zinc alloy, powder coated and steel, zinc plated
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Assorted lock styles
35
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
M1 Push-to-Close Latch
• Single, round-hole instillation• Flush pop out knob• Corrosion-resistant materials• PC/ABS, black, chrome plated
or gold coloured PVD• Max. working load: 310 N
Latches and Handles PUSH TO CLOSE LATCHES
62 Compression Latch, Handle StyleAssorted options
• Easy grip adjustment• Intuitive operation• Zinc alloy, powder coated or chrome plated and steel, zinc plated
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
36
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
PUSH TO CLOSE LATCHES
Latches and Handles
MP Point Push-to-Close Latch
• Single, round-hole installation• Flush pop out knob• Corrosion-resistant materials• Optional cover available for a
stylish look of the latch body• Keeper sold separately• Housing: Glass-filled nylon
Flange and knob: Zinc alloy, plated Cam: Zinc alloy
• Max. tightening torque on mounting nut: 4.5 N-m
Oval Perpendicular Oval In-Line Square Round
37
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Latches and Handles BALL MAGNETIC CATCH
H-18-1
H-18-2
H-18-3
H-22
H-22-B
38
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
H-22-C
H-23
H-25
H-26 - 3/8 H-26 - 5/16
BALL MAGNETIC CATCH Latches and Handles
39
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Hinges BUTT HINGES
Butt Hinge - Mild Steel - Zinc Plated Stainless Steel
CLLH-SH067 70 50 1.6 FIXED - METRIC
CLLH-SH027 85 60 1.6 FIXED - METRIC
CLLH-SH029 100 75 1.6 FIXED - METRIC
CLLH-BB010 100 75 2.5 FIXED - METRIC
CLLH-BB054 100 100 2.5 FIXED - METRIC
CLLH-BB100 100 75 3.3 FIXED - METRIC
CLLH-BB101 100 100 3.3 FIXED - METRIC
CLLH-SH001 70 50 1.6 LOOSE - METRIC
CLLH-SH002 85 60 1.6 LOOSE - METRIC
CLLH-SH003 100 75 1.6 LOOSE - METRIC
CLLH-BB050 100 75 2.5 LOOSE - METRIC
CLLH-BB056 100 100 2.5 LOOSE - METRIC
CLLH-SH011 1” 1” 0.03” FIXED - IMPERIAL
CLLH-SH012 1.5” 1.5” 0.03” FIXED - IMPERIAL
CLLH-SH013 2” 2” 0.03” FIXED - IMPERIAL
CLLH-SH014 2.5” 2.5” 0.03” FIXED - IMPERIAL
CLLH-SH015 3” 3” 0.04” FIXED - IMPERIAL
CLLH-SH016 3.5” 3.5” 0.04” FIXED - IMPERIAL
BUTT HINGE – MILD STEEL - ZINC PLATEDPART NO. LENGTH
(mm)OPEN WIDTH (mm)
GAUGE PIN TYPE
CLLH-SS030 50 35 1.6 FIXED - METRIC
CLLH-SS031 70 50 1.6 FIXED - METRIC
CLLH-SS032 85 60 1.6 FIXED - METRIC
CLLH-SS033 100 75 1.6 FIXED - METRIC
CLLH-SS019 100 75 2.5 FIXED - METRIC
CLLH-SS010 100 75 3.3 FIXED - METRIC
CLLH-SS020 100 100 2.5 FIXED - METRIC
CLLH-SS012 100 100 3.3 FIXED - METRIC
CLLH-SS034 70 50 1.6 LOOSE - METRIC
CLLH-SS035 85 60 1.6 LOOSE - METRIC
CLLH-SS036 100 75 1.6 LOOSE - METRIC
CLLH-SS028 100 75 2.5 LOOSE - METRIC
CLLH-SS011 100 75 3.3 LOOSE - METRIC
CLLH-SS037 100 100 2.5 LOOSE - METRIC
CLLH-SS013 100 100 3.3 LOOSE - METRIC
BUTT HINGE – STAINLESS STEEL (304)PART NO. LENGTH
(mm)OPEN WIDTH (mm)
GAUGE PIN TYPE
40
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
PIANO HINGE Hinges
The LLH Series of Continuous Hinges are designed for use in the commercial, domestic, military or other applications where a reliable hinging system is required.
The hinge can be easily customised to suit any applications.
Piano Hinge
Stocked Piano Hinge
Material Options:• Galvanised Steel• Zinc Anneal (untreated)• Mild Steel• Stainless Steel 304 or 316• Aluminium• Nickel Plated
Material Thickness (gauge):0.9mm, 1.0mm, 1.2mm, 1.6mm, 2.0mm, 3.0mm, 4.0mm
Hinge Open Width:As required
Hinge Length:As required
Customisation:For hole placement, hole sizes & shapes, bending & special cut outs is offered to our customers as required for ease of application
CODE MATERIAL GAUGE LENGTH PIN SIZEOPEN WIDTH
LLH-123218GV Galvanised Steel 1.2 32 1,800 3.18
LLH-123218SS Stainless Steel 304 1.2 32 1,800 3.18
LLH-123818GV Galvanised Steel 1.2 38 1,800 3.18
LLH-123818SS Stainless Steel 304 1.2 38 1,800 3.18
LLH-125018GV Galvanised Steel 1.2 50 1,800 3.18
LLH-125018SS Stainless Steel 304 1.2 50 1,800 3.18
LLH-165018GV Galvanised Steel 1.6 50 1,800 4.76
LLH-165018SS Stainless Steel 304 1.6 50 1,800 4.76
LLH-165718GV Galvanised Steel 1.6 57 1,800 4.76
LLH-165718SS Stainless Steel 304 1.6 57 1,800 4.76
LLH-167018GV Galvanised Steel 1.6 70 1,800 4.76
LLH-207018GV Galvanised Steel 2.0 70 1,800 4.76
41
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Hinges PLASTIC HINGES
Pinless Butt Hinge
Plastic Continuous Hinge
HINGE SIZECODE WEIGHT / BOX APPROX HINGE LOAD
BHBL115 1” x 1½” 2 oz. 108 lbs.
BHBL152 1½” x 2” 6 oz. 145 lbs
BHBL13 1” x 3” 7 oz. 183 lbs
BHBL253 2½” x 3” 18 oz. 360 lbs
BHBL3535 3½” x 3½” 32 oz. 615 lbs
BHBL44 4” x 4” 42 oz. 748 lbs
HINGE SIZECODE WEIGHT / BOX APPROX HINGE LOAD
CHWH 18 1-1/8” 4 lbs. 2 oz. 100 lbs./linear inch
CHWH 15 1-½” 6 lbs. 6 oz. 100 lbs./linear inch
CHWH 2 2” 10 lbs. 0 oz. 100 lbs./linear inch
CHWH3 3” 12 lbs. 6 oz. 100 lbs./linear inch
(For White BHWH...)
(For Black CHB...)
Flex-tested for millions of cycles, one piece Plastic Continuous Hinges may be used in place of metal piano hinges for bind-free and pinchless operation. Our continuous hinges are a great alternative to metal hinges where safety, corrosion or ease of clean up might be an issue.
Plastic Continuous Hinges are available in 25’, 50’ and 100’ rolls.
42
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
LIFT-OFF HINGE Hinges
Lift Off Hinge
Gate Hinge
CLLH-L0011 (LH) 100 75 1.6 LIFT OFF
CLLH-L0012 (RH) 100 75 1.6 LIFT OFF
CLLH-SS090 (LH) 100 75 2.5 S/STEEL (304)
CLLH-SS091 (RH) 100 75 2.5 S/STEEL (304)
LIFT OFF BUTT HINGE – MILD STEEL
LIFT OFF HINGE – STAINLESS STEEL
PART NO.
PART NO.
L (mm)
L (mm)
W (mm)
W (mm)
GAUGE
GAUGE
PIN TYPE
PIN TYPE
CLLH-GH003 (LH) 100 75 2.5 S/STEEL (304)
CLLH-GH004 (RH) 100 75 2.5 S/STEEL (304)
LIFT OFF HINGE – STAINLESS STEELPART NO. L (mm) W (mm) GAUGE PIN TYPE
Right Hand
Left Hand
43
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Heavy Duty Lift Off HingeLLH-40810100MS-WH
Lift Off Hinge127 Chrome plated steel
Hinges LIFT-OFF HINGE
44
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Pintle Hinge
Plastic Lift-Off Hinge H00125 Series
LIFT-OFF HINGE Hinges
PART NO. COLOUR M1 M2 M3 M4 Mb5
H00135IL BLACK 40 80 28 15 10
H00135IL-CHR CHROME 40 80 28 15 10
H00135ILSS POLISHED S/S 41 82 29 16 12
H00136IL CHROME 25 50 13 14.8 9.85
APH500 CHROME 25 50 13 16 12
APH650 CHROME 41 82 29 16 12
Brass Chrome Plated complete with screws
The H125 Series of Lift -Off or Turn Hinges are designed for use in commercial, domestic or other applications, which require a reliable and inexpensive hinging hardware. This uniquely designed hinge can improve your product aesthetically.
45
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Hinges LIFT-OFF HINGE
H00182 - LH
FINISH/MATERIAL
H00183 - RH
H00184IL
46
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
H185/1.0-1.6 material thicknessZinc Die Cast Black Powder Coat
H185/1.7-2.0 material thicknessZinc Die Cast Black Powder Coat
PANEL CUTOUT Hinges
47
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Hinges CONCEALED
0.55.0230.0 Mild Steel Zinc Plated passivated
0.55.0231.0 Mild Steel Zinc Plated passivated
Also available in Stainless Steel: Part# 0.55.0232.0
Also available in Stainless Steel: Part# 0.55.0233.0
48
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
CLLH-DHIM3567 - Mild Steel
CONCEALED Hinges
CLLH-DHIM60 - Mild Steel
49
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Hinges BULLET HINGE
BH101-ABullet Hinge - Aluminium
BH088-ABullet Hinge - Aluminium
50
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
DHFM-40S
DIECAST HINGE Hinges
DHFM-6090
DHFM-6090S
51
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Hinges DIECAST HINGE
DHFM-8060-PC-L
HL009
52
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
DHFM-30
DHFM-50
DIECAST HINGE Hinges
DHFM-40
DHFM-76
DIECAST HINGE – BLACK POWDER COAT
MODEL NO. WT. (gm) A B T E M1 C1 C2 M2 P D
DHFM-25 12 25 25 3 5 15 7.5 7.5 15 3 M3
DHFM-30 13.3 25 30 3 6 18 9 9 15 3 M4
DHFM-40 48 40 40 5 7.5 25 12.5 12.5 25 4 M5
DHFM-50 91 50 50 6 10 30 15 15 30 6 M6
DHFM-60 123 60 60 6 12 36 18 18 36 6 M8
DHFM-68 138 60 68 6 11 46 18 28 36 6 M6/M8
DHFM-76 157 60 76 6 10 55.5 28.5 28.5 36 6 M6
DHFM-5076 119 50 76 6 10 56 28 28 30 6 M6
53
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
DIECAST HINGE
Hinges POLYMIDE HINGE
DHIF-50
DHIF-40
DHIF-30
DHIF-25MODEL NO. WT. (gm) A B T M1 M2 P D
DHIF-25 3.5 25 25 3 15 15 3 M3
DHIF-30 4 25 30 3 18 15 3 M4
DHIF-40 13 40 40 5 25 25 4 M5
DHIF-50 25 50 50 6 30 30 6 M6
54
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
POSITION CONTROL Hinges
G6 - Position Control - Detent
C6 - Position Control - Detent
55
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Hinges POSITION CONTROL
E6 - Position Control - Adjustable Torque
E6-10-101 - Position Control - Adjustable Torque
Large E6-10-501
Medium E6-10-301
56
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
CONSTANT TORQUE Hinges
E6 - Constant Torque
E6 - Constant Torque
Material:• Large - Zinc alloy, Black• Medium - Aluminium alloy, Black
Material: Zinc alloy, hardened steel internal components
PART NUMBER SYMMETRIC TORQUE N•m (in•ibf)
E6-10-400-50 Free operating
E6-10-416-50 1.8 (16)
E6-10-420-50 2.3 (20)
E6-10-430-50 3.4 (30)
LARGE
PART NUMBER SYMMETRIC TORQUE N•m (in•ibf)
BLACK SATIN CHROME
E6-60-400-50 E6-60-400-20 Free operating
E6-60-412S-50 E6-60-412S-20 1.36 N•m (12 in•lbf)
E6-60-420S-50 E6-60-420S-20 2.26 N•m (20 in•lbf)
E6-60-428S-50 E6-60-428S-20 3.16 N•m (28 in•lbf)
E6-60-436S-50 E6-60-436S-20 4.07 N•m (36 in•lbf)
PART NUMBER SYMMETRIC TORQUE N•m (in•ibf)
E6-10-400-50 Free operating
E6-10-416-50 1.8 (16)
E6-10-420-50 2.3 (20)
E6-10-430-50 3.4 (30)
MEDIUM
57Hinges SPRING LOADED
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Spring Loaded Hinges
Snap In Hinge - DHFMC– 2230
CODE MATERIALMATERIALTHICKNESS LENGTH PIN SIZE
OPEN WIDTH
OPEN WIDTH
OPEN WIDTH
BH5015SS 304SS .025 .750 1.250 .066 N/A ClosedBH5020 CRS .035 1.063 1.250 .091 #3 ClosedBH502001 304SS .035 1.063 1.250 .091 #3 Closed/Open*BH5030 CRS .035 1.063 2.000 .091 N/A Open BH5033 CRS .039 1.062 1.250 .091 .130 OpenBH5030SS01 304SS .035 1.250 2.000 .091 #3 ClosedBH5031SS 304SS .035 1.500 2.000 .091 .141 OpenBH5085 CRS .050 2.750 1.562 .115 .156 OpenBH5087 CRS .050 3.250 1.562 .115 .156 OpenBH5089SS 304SS .060 1.500 2.500 .120 N/A OpenBH5090 CRS .060 2.000 3.000 .125 N/A OpenS61515-03 CRS .060 1.500 12.000 .120 N/A Open
BH5015SS
BH5030 BH50300SS01 BH5031SS
BH5020 BH502001 BH5033
58
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
CAM LOCKS miscellaneous
• Ideal for applications requiring multiple key codes or tool actuated options
• Sealed version meets NEMA 4 and IP65 water intrusion standards
• Lock cores and cams sold separately
• Master and non-master key codes available
Cam Lock - Removable Core
Cam Rotation - clockwise Counter-clockwise
Contact Concept Latch Lock & Hinge for part numbers and further information
• Stainless steel scalp on housing and lock core on non-shuttered style
• Sealed version meets NEMA 4 and IP65 water intrusion standards
• Cams sold separately
Cam Lock - Fixed Core
Cam Rotation - clockwise Counter-clockwise
Sealed Disc Tumbler Non-Sealed Disc Tumbler
Contact Concept Latch Lock & Hinge for part numbers and further information
59
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
miscellaneous CAM LOCKS
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Cam and Installation
Material: Cam - Steel plated
Part Numer SelectionOrder lock and cam separatelyCam part number (no lock)
Contact Concept Latch Lock & Hinge for part numbers and further information
• Sealed to meet NEMA 4 and IP65 water intrusion standards
• Smooth, consistent operation• Cams sold separately
Cam Lock - Fixed Core Wing Driver
Cam Rotation - clockwise Counter-clockwise
Contact Concept Latch Lock & Hinge for part numbers and further information
60
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
CAM LOCKS miscellaneous
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
PT Tubular Key Cam LocksCams and instillation
PT Tubular Key Cam LocksFixed Core
Contact Concept Latch Lock & Hinge for part numbers and further information
Contact Concept Latch Lock & Hinge for part numbers and further information
61
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
miscellaneous PINCHWELD
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
PINCHWELD - EPDM RUBBER & SPONGEEPDM FIRE RETARDATION SPECIFICATIONEPDM - 30-50mm/min.(spect max 100mm/min. for elastomers.)Defined as SEB (Self Extinguishing with Burn Rate). Combustion gas off EPDM is carbon dioxide. All supplied in 50 metre rolls.
62
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
PINCHWELD miscellaneous
PINCHWELD - EPDM RUBBER & SPONGEContinued
63
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
miscellaneous PINCHWELD
PINCHWELD - PVC/EPDM SPONGEPVC/EPDM SPONGE PINCHWELD FIRE RETARDATION SPECIFICATIONEPDM Sponge - 30-50mm/min.(spect max 100mm/min. for elastomers.) PVC - 60-100mm/min.(spect max 150mm/min. for PVC & plastics.)
Both are defined as SEB (Self Extinguishing with Burn Rate). PVC is a plastic and all plastics are deformed by heat. Combustion gas off EPDM sponge is carbon dioxide while PVC produces water and some chlorine gasses.
All supplied in 50 metre rolls
64 HANDLES
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
miscellaneous
3201-122
CLLH-1048Grab Handle - Surface Mount 100mm &150mm
P2 Flush Pull Handle
For more handles refer to the RENCOL section of this catalogue or visit www.southco.com
65HANDLES
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
miscellaneous
CLLH-CH906
CLLH-CH913
Folding Handles3401
L H=41.5 H=51.5 SUS 304 STEEL
66
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
miscellaneousLASHING RINGS / ANTI-LOOSE
9573 2.54-Ø7
CODE DIMENSIONSBREAKING LOAD
with HOLDING SPRINGMATERIAL
LR001 102mm x 95mm 2000kg Mild Steel No
LR001-S 102mm x 95mm 2000kg Stainless Steel (304) No
39530 102mm x 95mm 2000kg Mild Steel Yes
39530-S 102mm x 95mm 2000kg Stainless Steel (304) Yes
Lashing Rings
Anti-Loose
WELD ON TYPE MATERIAL B CA D
A101 WELD ON STEEL ZINC PLATED 6 72 12mm 13
A102 BOLT ON STEEL ZINC PLATED 6 72 M12 48
A203 BOLT ON STEEL ZINC PLATED 8 70 M12 25
A204 BOLT ON STEEL ZINC PLATED 8 70 M12 60
53020 WELD ON STEEL ZINC PLATED 6.5 73.5 M12 21
53040 BOLT ON STEEL ZINC PLATED 6.5 50.5 M8 21
53040-S BOLT ON STAINLESS STEEL 6.5 50.5 M8 21
53050 WELD ON STEEL ZINC PLATED 6.5 50.5 8mm 10
Weld onScrew / Bolt on
67
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
miscellaneous
Adjustable Over-Centre Latches
CODE MATERIAL B CA D E F G
OL412 MILD STEEL 23 16 83-89 4 17 10 50
OL412SS STAINLESS 304 23 16 83-89 4 17 10 50
OL413 MILD STEEL 31 21 105-120 5 20 14 62
OL413SS STAINLESS 304 31 21 105-120 5 20 14 62
OL414 MILD STEEL 40 30 145-165 8 25 17 91
OL414SS STAINLESS 304 40 30 145-165 8 25 17 91
AB F
C G
E
D
ADJUSTABLE OVER CENTRE LATCHES
68
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
miscellaneous
High Bond Adhesive Foam and Neoprene Tapes
Concept Latch Lock & Hinge supply Industry with high Quality made to Order Foam / Neoprene adhesive tapes. The adhesive tapes are available in specialty finishes for Automotive, marine and other industrial applications. The following table seeks to assist with your product selection.
Kwikseal 6100 Neoprene Foam TapeMedium to hard density closed cell neoprene foam coated with an ag-gressive acrylic adhesive. Ideally suited for creating a waterproof seal around electrical control & switch cabinets, marine hatches. Can be die cut into gaskets or profiles.
100 - Thicknesses available: 2mm, 3mm, 4.8mm, 6mm, 9mm, 12mm & 19mm.
Kwikseal 3829 Polyethylene Foam TapeLinerless medium density closed cell polyethylene foam coated with an aggressive acrylic adhesive. Ideally suited for sealing air conditioning ducting & “damming” seals around car windscreens.
3829 - Thicknesses available: 2mm, 3mm, 4.8mm, 6mm, 9mm, 12mm & 19mm.
Kwikseal 9100 Polyethylene Foam TapeMedium density closed cell polyethylene foam coated with an aggres-sive acrylic adhesive. Ideally suited for sealing air conditioning ducting & automotive seals. Can be die cut into gaskets or profiles.
9100 - Thicknesses available: 2mm, 3mm, 4.8mm, 6mm, 9mm, 12mm & 19mm.
Kwikseal 3024 PVC Foam TapeMedium density closed cell PVC foam tape coated with aggressive acrylic adhe- sive. Ideally suited as “anti hot spot” tape for nursery tunnels & as a purlin tape under polycarbonate roofing sheets. Can also be used as to stop draughts around doors, windows & office partitioning & ceilings.
3024 - Thickness - 3.2mm
Kwikseal 3207/3209 PVC Foam TapeSoft density closed cell PVC foam coated with an aggressive acrylic adhesive. Ideally suited for creating waterproof & vibration dampening seals. Can be die cut into gaskets or profiles.
3207 - Grey Thicknesses available: 3.2mm, 4.8mm, 6.4mm, 9.5mm & 12.7mm. 3209 - Black Thicknesses available: 3.2mm, 4.8mm, 6.4mm, 9.5mm, 12.7mm & 19mm.
Kwikseal 3257/3259 PVC Foam TapeMedium density closed cell PVC foam coated with an aggressive acrylic adhesive. Ideally suited for creating waterproof & vibration dampening seals. Can be die cut into gaskets or profiles.
3257 - Grey Thicknesses available: 1.6mm, 3.2mm, 4.8mm, 6.4mm, 9.5mm & 12.7mm. 3259 - Black Thicknesses available: 1.6mm, 3.2mm, 4.8mm, 6.4mm, 9.5mm & 12.7mm.
Kwikseal 3507/3509 PVC Foam TapeHard density closed cell PVC foam coated with an aggressive acrylic adhesive. Ideally suited for creating waterproof & vibration dampening seals. Can be die cut into gaskets or profiles.
3507 - Grey Thicknesses available: 1.6mm, 3.2mm & 6.4mm. 3509 - Black Thickness available: 1.6mm, 3.2mm, 4.8mm, 6.4mm & 9.5mm
Kwikseal 7100 Polyurethane Foam TapeSoft density open cell polyurethane foam coated with an aggressive acrylic adhesive. Ideally suited for creating a dust & insect barrier around light fittings & cabinets. Also provides effective draught seal. Can be die cut into gaskets or profiles.
Thicknesses available: 3mm, 6mm, 9mm, 12mm & 18mm.
ADHESIVE FOAM
69
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
BI-FIX QUARTER TURN FASTENERS
miscellaneous
Bi-Fix Quarter Turn Fasteners
The BI-FIX quarter turn fastener is used for securing panels and components where accessibility is important. The special characteristic of the BI-FIX quarter-turn fastener is its quick and simple detachability. A 90¡ turn of the stud unlocks the fastener. Finger pressure onto the head of the stud re-clicks the fastener into the locked position.
Finger pressure on top of the head of the Stud is sufficient to click the Fastener into the locked position. In locked position, the two sides of the Clip seize the notches of the Stud. This connection cannot be opened by vibration or shocks, unless they reach some 100 g (acceleration due to gravity). Under axial tension the fasteners become more and more form-fit, until the clip reaches maximum load (see technical details).
The BI-FIX quarter-turn fastener can be used wherever 2 elements have to be fastened and detached in a quick and safe manner. The BI-FIX quarter-turn fastener is ideal for any application where panels, doors or hatches are continually opened or removed for maintenance or security manufactured from quality materials they are rugged and easy to operate.
The Bi-Fix Quarter Turn Fastener consists of 3 parts:
1. The Stud, which is located in the loose panel.
2. The Washer, which is used for retention of the stud and vibration resistance.
3. The Spring Clip, which is installed permanently into the shell framework, and is designed to ensure that the stud is ejected automatically when turned 90º.
The Bi-Fix Quarter Turn Fastener is manufactured in 3 size series, 8mm, 11mm or 16mm.
1. Forces and hole diameters (sizes)The size of the quarter turn fastener can be determined by the occurring forces, by existing hole sizes or aesthetics.
2. Standard heads and material of the StudOnce the size of the stud has been selected, the shape of the head and the material must be chosen.
3. Securing the Studyou have to choose the best method of securing the stud at the loose part. For temperatures up to 90 C the standard washer “R” is adequate and the most popular method of retention. For temperatures exceeding 90¡C the conical wire spring or circlip are recommended.
4. Fixing-method for Spring ClipsThe Clip is the least expensive item and dependent upon customer preference and mounting position. The Clip can be assembled using rivets, spot welding, screws, clip-ins, slide-ons and angle-plates. To ease a conversion to the BI-FIX quarter-turn system, we offer spring-clips whose hole patterns correspond to those of other producers.
5. Choice of StudAll series are available in any grip length, standard items are graduated as listed. Specials are available to customer requirements: (see left)
Domed Head
Winged Head
Knurked Head
Please contact Concept Latch Lock & Hinge, or visit our website www.conceptlatch.com.au for detailed information on Bi-Fix Fasteners, and assistance in selecting the correct Bi-Fix Components.
70
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
miscellaneousDZUS FASTENERS
DZUS Quick Access Quarter-Turn Fasteners
DZUS Lion Fasteners DZUS Lion fasteners provide strength for high-cycle applications.
DZUS Rapier fasteners offer a low-cost, grip tolerant solution for high-volume production applications
DZUS Panex available in multiple finishes offer a broader range of aesthetic options to match application designs. High-strength hardened steel provides excellent tensile and shear strength.
DZUS Rapier Fasteners
DZUS Panex Fasteners
Southco now offers an extensive selection of DZUS Quarter-Turn Fasteners to satisfy a broad range of requirements for quick access, high-strength and economical performance. Each product line comes with its own set of matched receptacles for accurate, secure engagement and convenient mounting in a range of applications.
71DZUS FASTENERS
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
miscellaneous
DZUS Standard Fasteners
DZUS Pilot Fasteners
DZUS Arrow Fasteners
DZUS Nylatch Panel Fasteners
DZUS Dart Fasteners
DZUS Nylatch Quarter-turn Fasteners
DZUS Standard fasteners deliver predictable clamping force and positive lock along with high load-strength for high-vibration environments.
DZUS Pilot fasteners offer push-to-close convenience with quarter-turn opening
DZUS Arrow fasteners are made with injection-moulded thermoplastic to provide a cost-effective fastening solution with push-to-close convenience and quarter-turn opening.
DZUS Nylatch Panel Fasteners are captivated in the upper (removable) panel and use a retractable plunger design to release the tension on the grommet that holds mating plates together.
DZUS Dart all-plastic fasteners generate maximum economy in high-volume applications with low load requirements.
Nylatch Quarter-Turn Fasteners provide the lowest installed cost of any positive quarter-turn fastener available. Install through panel and frame with a single tap, and unlatch with a quarter turn to release panel with the base stays in the the frame for re-use.
72 COVER STAYS
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
miscellaneous
6102-01 Left opening6102-02 Right opening
6103-01 Left opening6103-02 Right opening
73COVER STAYS
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
miscellaneous
6104-01 Left opening
6105-02-00
6104-02 Right opening
74
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
COVER STAYS miscellaneous
6301-01
75
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
76
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
INTRODUCTION Ball Bearing SlidesM
EDIU
M D
UTY
LIG
HT
DU
TYEL
ECTR
ON
IC E
NC
LOSU
RES
TO THE DESIGN ENGINEER
77
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
Ball Bearing Slides INTRODUCTIONH
EAVY
DU
TY20
SER
IES
SPEC
IALT
Y SL
IDE
PR
OD
UCT
S
78
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
SLIDES FOR ELECTRONIC ENCLOSURES
Ball Bearing Slides
ELECTRONIC ENCLOSURES
79
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
SLIDES FOR ELECTRONIC ENCLOSURES
Ball Bearing Slides
ELECTRONIC ENCLOSURES
CABLE CARRIERS
80
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
LIGHT DUTY SLIDES Ball Bearing Slides
INDUSTRIAL APPLICATIONS
Light Duty Slides
Products in this category carry loads from 75 to 108 pounds and offer a variety of features including self-closing touch release, Easy-Close, and corrosion resistance.
Specifications at a Glance
model Travel Detent PageDisconnectmax Load Capacity
Cross Section Width
81
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
LIGHT DUTY SLIDESBall Bearing Slides
82
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
LIGHT DUTY SLIDES
INDUSTRIAL APPLICATIONS
Ball Bearing Slides
83
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
LIGHT DUTY SLIDES
Ball Bearing Slides
84
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
MEDIUM DUTY SLIDES
INDUSTRIAL APPLICATIONS
Medium Duty Slides
Products in this category carry loads from 140 to 155 pounds and offer features such as lock-in and lock-out as well as a variety of mounting options.
Ball Bearing Slides
Specifications at a Glance
model Travel Detent or lock
PageDisconnectmax Load Capacity
Cross Section Width
85
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
MEDIUM DUTY SLIDES
Ball Bearing Slides
86
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
MEDIUM DUTY SLIDES
INDUSTRIAL APPLICATIONS
Ball Bearing Slides
87
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
MEDIUM DUTY SLIDES
Ball Bearing Slides
88
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
HEAVY DUTY SLIDES
INDUSTRIAL APPLICATIONS
Ball Bearing Slides
89
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
HEAVY DUTY SLIDES
Ball Bearing Slides
90
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
HEAVY DUTY SLIDES
INDUSTRIAL APPLICATIONS
Ball Bearing Slides
91
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
HEAVY DUTY SLIDES
Ball Bearing Slides
92
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
HEAVY DUTY SLIDES
INDUSTRIAL APPLICATIONS
Ball Bearing Slides
93
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
SUPER HEAVY DUTY SLIDES
Ball Bearing Slides
94
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
STAINLESS STEEL Ball Bearing Slides
95
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
STAINLESS STEELBall Bearing Slides
96
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.auPh: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
97
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
98
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
COMPACT RAIL
99
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
COMPACT RAIL
100
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
COMPACT RAIL
101
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
COMPACT RAIL
102
103
104 TELESCOPIC RAIL
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
105TELESCOPIC RAIL
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
106 TELESCOPIC RAIL
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
107
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
108
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
SINGLE POINT Slam Latches
1031-A
6000 R & L / 1-6000 R & L
109
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
SINGLE POINTSlam Latches
PUSH BUTTONSINGLE POINT PUSH BUTTON 862
SINGLE POINT PUSH BUTTON 872
110
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
STRIKE 561/563
SINGLE POINT Slam Latches
111
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
SLAM LATCHES – 626-KPK
628-APK / 628-APK-MB
SINGLE POINTSlam Latches
112
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
PADDLE LATCHES Rotary
PADDLE ROTARY LATCH – 9600PK / 9601PK
PADDLE ROTARY LATCH – 9600PK / 9601PK
113KNOB & PUSH BUTTON
Latches
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOB ASSEMBLY 2-622-U
TWO POINT PUSH BUTTON – 2-682-PK
114
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
DEAD BOLT LATCHES
Latches
SQUEEZE LATCH—560LIGHT DUTY - 5611
115
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
COMPRESSION LATCHES
Latches
BUTTON LATCH 433
SMALL LATCH 434
116
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
COMPRESSION LATCHES
Latches
SMALL TRIGGER LATCH 534
SMALL TRIGGER LATCH 634
117
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
FRIGERIO ETTORE S.p.A.
118
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
TOGGLE LATCHES FRIGERIO ETTORE
TOGGLE LATCH – 2.00.00
HASP TOGGLE LATCH – 2.00.01
TOGGLE LATCH WITH SECONDARY LOCK – 2.00.02
119
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
TOGGLE LATCHESFRIGERIO ETTORE
TOGGLE LATCH WITH KEY LOCK – 2.00.03
TOGGLE LATCH WITH CLICK ARREST – 2.00.40
TOGGLE LATCH – 2.01.00
120
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
TOGGLE LATCHES FRIGERIO ETTORE
HASP TOGGLE LATCH – 2.01.01
TOGGLE LATCH – 2.02.00
TOGGLE LATCH – 2.03.00
121
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
TOGGLE LATCHESFRIGERIO ETTORE
HASP TOGGLE LATCH – 2.03.01
TOGGLE LATCH WITH SECONDARY LOCK – 2.03.02
TOGGLE LATCH – 2.04.00
2.04.10 Latch in unplated steel without holes
122
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
TOGGLE LATCHES FRIGERIO ETTORE
HASP TOGGLE LATCH – 2.04.01
ADJUSTABLE TOGGLE LATCH – 2.05.00
CL 621/2.05
2.04.11 Latch in unplated steel without holes
123
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
TOGGLE LATCHESFRIGERIO ETTORE
TOGGLE LATCH– 2.07.00
TOGGLE LATCH – 2.08.00
2.08.10 Latch in unplated steel without holes
124
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
TOGGLE LATCHES FRIGERIO ETTORE
HASP TOGGLE LATCH – 2.09.01
TOGGLE LATCH – 2.10.00
HASP TOGGLE LATCH – 2.17.00
125
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
TOGGLE LATCHESFRIGERIO ETTORE
ADJUSTABLE TOGGLE LATCH – 2.18.00
ADJUSTABLE HASP TOGGLE LATCH – 2.18.01
126
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
TOGGLE LATCHES FRIGERIO ETTORE
TOGGLE LATCH – 2.19.00
TOGGLE LATCH – 2.22.00
ADJUSTABLE TOGGLE LATCH – 2.30.00
Minimum quantity for existing measure: 200 pcs. Minimum quantity for new measure: 100pcs
127
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
TOGGLE LATCHESFRIGERIO ETTORE
ADJUSTABLE TOGGLE LATCH WITH SECONDARY LOCK – 2.30.02
ADJUSTABLE TOGGLE LATCH – 2.40.00
ADJUSTABLE HASP TOGGLE LATCH – 2.40.01
128
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
TOGGLE LATCHES FRIGERIO ETTORE
ADJUSTABLE TOGGLE LATCH – 2.41.00
ADJUSTABLE HASP TOGGLE LATCH WITH SECONDARY LOCK – 2.41.02
ADJUSTABLE HASP TOGGLE LATCH – 2.41.01
129
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
TOGGLE LATCHESFRIGERIO ETTORE
TOGGLE LATCH WITH TENSION SPRINGS – 2.42.00
TOGGLE LATCH – 2.43.00
TOGGLE LATCH WITH TENSION SPRINGS – 2.44.00
130
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
TOGGLE LATCHES FRIGERIO ETTORE
TOGGLE LATCH – 2.45.00
TOGGLE LATCH– 2.52.00
ADJUSTABLE TOGGLE LATCH – 2.46.00
131
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
PIVOT POINT
132
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
CLEVIS PINS
CLEVIS PINS
Pivot Point manufactures clevis pins in-house. Stock pins are cold headed per IFI standards except for hole and point dimensions. All holes are chamfered for a superior part finish.
Only the finest cold heading quality wire is used. 3/16 through 3/8 diameters are 1008/1010 carbon steel, 1018 carbon steel is used for 7/16 through 3/4 diameters.
Standard clevis pins listed below are stocked plain finish and drilled per Pivot Point specifications.
Standard clevis pins and grades are available. Pivot Point stocks alloy material to produce up to grade 8 strength if required.
Secondary heat treatment, lating, grooving and end chamfering available.
133
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
POSITIVE LOCK PINS
POSITIVE LOCK PINS
The newest addition to our family. Positive Lock Pins have a push button that initiates ball action and retraction. Positive locking design combines secure fastening with “quick release” ease of removal. Double ball design increases retention capabilities.
Our unique design features a one-piece, cold formed body, and a one-piece, cold formed spindle.
Stocked in heat treated alloy steel for strength and durability. Standard finish is Zinc and Yellow Chromate. Other finishes available.
134
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
RING PINS
RING PINS
135
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
NYLON LANYARDS
NYLON LANYARDS
Keep pins, fasteners and other components where they belong with Nylon Lanyards. This low-cost alternative to steel lanyards offers light-duty retention and loss prevention. Available from stock in various styles and lengths. Made from “Super Tough” ST801 Zytel Nylon.
Fixed End Style
Supplied in either Type 1, Type 2, or Type 3 configurations with molded (fixed) loops and eyelets. Attach loop to rings of pins being retained. Rivet eyelet to equipment. Or, devise your own methods of attachment. These three styles offer limitless possibilities! Stocked in 6”, 8”, and 10” lengths.
136
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
NYLON LANYARDS
NYLON LANYARDS
U-Lock Style Patent No. 5,784,760
One end is a loop, supplied open. Attach to component, then “snap” together! Loop is permanently locked. Available with either a molded loop or eyelet on the other end. Stocked in 10” (assembled) lengths.
137
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
STEEL LANYARDS
STEEL LANYARDS
Pivot Point offers a selection of high quality lanyard assemblies 3/64 to 1/8 cable diameter for light-duty retention. These lanyards are typically attached to pins and other fasteners to prevent loss.
All Pivot Point standard lanyards are made from 7 x 7 aircraft cable chosen for its strength and flexibility. Stock sizes are available in galvanized steel cable, bare or coated with polyvinyl chloride (PVC) or nylon. PVC coating is more popular because of its appearance, flexibility, and low cost. Nylon offers more durability and abrasion resistance.
Stainless lanyard assemblies are made to order. Specify cable diameter and coating on application.
Special lanyards can be assembled fast and are priced without a set-up charge.
138
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
WIRE LOCK PINS
WIRE LOCK PINS
Wire lock pins are like having pin and cotter in one secure assembly. The wire loop is pulled over the pin end to lock it in place or remove it. This one-piece fasteners eliminates cotter pin loss and fits most “quick release” applications.
Made of a low carbon steel cold-headed pin and spring wire loop, zinc plated.
139
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
TAB LOCK PINS
BALL PLUNGER
TAB LOCK PINS
Easier to use than standard wire lock pins. Pull up on tab to remove, push down on wire loop to lock. Tab acts as a load ramp which guides wire loop to a locked position when installing. Made of low carbon steel, zinc plated. Wire loop of hard drawn spring wire.
Non-threaded design press-fits into hole. Spring loaded ball forms bearing surface which retracts and then snaps into opposing hole or groove. Use for locating or positioning in drawers, doors dies and other fixtures.
Install Ball Plunger into press fit hole in material. Spring loaded ball automatically depresses to allow adjustments.
Spring loaded ball then snaps back into the desired hole, groove or indentation.
140
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
PULL PINS
PULL PINS
Body is threaded into application, with ring on outside surface. Pull ring to retract spring loaded tip and allow adjustment of equipment. Release ring to lock pin into desired hole position.
Chamfered tip allows for easy adjustment. Ideal for adjustable tubing, tooling, latches, and gates. Stock sizes are 12L14 steel, zinc plated. Special sizes and materials available.
Install Pull Pin into pre-tapped hole in material.
Pull ring to retract plunger and allow for adjustments. Release ring and plunger locks into desired hole position.
For lighter gauge materials, a nut may be welded to outside of material. The Pull Pin then threads into nut.
141
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
PINS
BOW-TIE LOCKING COTTER
The new Bow-Tie Locking Cotter pin works like a Hairpin Cotter, but locks itself on! Push or pull cotter leg into hole, Bow-Tie snaps into a zero-tension locked position. It is easily released by lifting loop and sliding off, but reduces the risk of being accidentally knocked or vibrated off, as with Hairpin Cotters. Made from MB Spring Wire with an attractive zinc plated finish. Use in any hole location to ensure secure fastening.
142
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
PINS
DOUBLE LOOP HAIR PIN COTTER
HAIR PIN COTTER
A double loop adds flexibility for a wider fit range. Stresses are evenly spread throughout the loop giving longer life and more repeatability. Made of hard drawn MB spring wire, zinc plated and baked. High quality.
A spring-type cotter made to be reusable. Pivot Point hair pin cotters are made exclusively to our exact specifications. Designed to be strong and secure, these fasteners are economical and widely used. It is important to select the correct size because misuse causes fatigue and will result in loss of the fastener. Consult our use chart below and ask us about proper hole size. We’ll be glad to help.
Made from hard drawn MB spring wire, zinc plated and baked or stainless type 302.
143
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
PINS
RUE RINGS COTTER
A Pivot Point Exclusive. Revolutionary Rue Ring Cotters surround the shaft. Automatic lock makes this one of the safest cotters available today. Best used in light to medium applications. Rue Ring cotters install fast without tools.
Additional feature is the manual secondary lock which tensions the Rue Ring tight and dampens vibration.
Made of hard drawn MB spring wire, zinc plated or stainless type 302. Easy to install - easy to remove.
HOLE PLACEMENT END SHAFT USE ONLY
Rue Ring Cotters will retro fit most standard applications without design changes.
Total width of any Rue Ring equals 3 of its wire diameters. The straight wire shaft which goes through the pin hole is one, plus two additional wire loops, one on each side, front and back.
Recommended hole size is 2 times the wire diameter of the selected Rue Ring. This leaves the Rue Ring short of interfering with effective shaft length.
Recommended web thickness is a minimum of 1 wire diameter and a maximum of 2 wire diameters. A thicker web results in more holding power but makes installation and removal more difficult.
144
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
LYNCH PINS
LYNCH PINS
Pivot Point imports this high quality fastener direct from Denmark - no middlemen. Made to rigid standards, this is the highest quality standard lynch pin available. Made from low carbon steel, zinc plated and yellow chromate dipped, this pin is especially corrosion resistant. The “over center” ring loop attached to the head snaps down hard to hold the fastener in place. A special heavy ring is also available for extreme applications.
Made in Denmark.
145
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
DETENT RING PINS
DETENT RING PINS
Ball detent depresses and springs up for “quick release” applications. Used as a convenient way to adjust or remove accessories on equipment. A stainless steel ball is supported by polyeurathane. This design is low cost and superior in its resistance to foreign material contamination which would shorten ball life.
Standard sizes are made from 12L14 carbon steel zinc plated. Rigid quality control procedures ensure a consistent fastener you can count on.
146
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
LYNCH PINS
DETENT RING PINS CONTINUED
147
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
RENCOL
148
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBS RENCOL
SINGLE MICKEY KNOB
149
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBSRENCOL
TWIN MICKEY KNOB
150
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBS RENCOL
SOFT TOUCH LOBE KNOBS
151
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBSRENCOL
LOBE KNOB
152
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBS RENCOL
LOBE KNOB COMPLETE WITH CAP
153
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBSRENCOL
LOBE KNOB - SOLID
154
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBS RENCOL
WING KNOB
155
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBSRENCOL
TRI-STAR KNOBS
156
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBS RENCOL
SCALLOP KNOBS
157
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBSRENCOL
SCALLOP KNOBS
158
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBS RENCOL
STAR KNOBS
159
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBSRENCOL
STAR KNOBS
160
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBS RENCOL
SELF ASSEMBLY KNOBS
161
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBSRENCOL
KNURLED KNOBS
162
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBS RENCOL
KNURLED KNOBS
163
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBSRENCOL
BUTTON KNOB
164
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBS RENCOL
TAPER KNOBS
165
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBSRENCOL
THREADED BALL KNOBS
166
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBS RENCOL
TEE HANDLE KNOBS
167
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
KNOBSRENCOL
TEE HANDLE KNOBS
168
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
HANDLES RENCOL
REVOLVING HANDLES
169
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
HANDLESRENCOL
REVOLVING HANDLES
170
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
HANDLES RENCOL
GRIP HANDLE & CRANKING HANDLES
171
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
HANDLESRENCOL
INDEXING CLAMPING HANDLE
172
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
HANDLES RENCOL
INDEXING CLAMPING HANDLE
173
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
HANDLESRENCOL
BRIDGE HANDLES
174
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
HANDLES RENCOL
BRIDGE HANDLES
175
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
HANDLESRENCOL
OVAL SECTION WHEELS
176
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
HANDLES RENCOL
CONTROL HAND WHEELS
177
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
HANDLESRENCOL
INDEXING PLUNGERS
178
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
HANDLES RENCOL
INDEXING PLUNGERS
179
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
STABILUS
180
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
LIFT-O-MAT
LIFT-O-MAT
181
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
LIFT-O-MAT
LIFT-O-MAT
182
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
LIFT-O-MAT
LIFT-O-MAT
183
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
LIFT-O-MAT
LIFT-O-MAT
184
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
LIFT-O-MAT
LIFT-O-MAT
185
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
LIFT-O-MAT
LIFT-O-MAT
186
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
LIFT-O-MAT
LIFT-O-MAT
187
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
LIFT-O-MAT
LIFT-O-MAT
188
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
LIFT-O-MAT
LIFT-O-MAT
189
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
LIFT-O-MAT
LIFT-O-MAT
190
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
LIFT-O-MAT
LIFT-O-MAT
191
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
GAS SPRING MOUNTS
GAS SPRING MOUNTS
192
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.auPh: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
WC706
WC707
GAS SPRING MOUNTS
193
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
INDEX
PRODUCT INDEX
ITEM No. / DESCRIPTION PAGE No.
127 4
200 4
240 4
433 5
434 5
534 5
560 6
561 6
563 6
634 6
862 6
872 6
3401 6
5611 6
9200 6
9301 6
9501 6
10207 6
10208 7
10402 7
10403 8
10407 9
10408 9
10409 10
10410 10
10411 10
10412 10
10507 11
10602 11
10603 11
18430 12
18431 12
6604101 13
0.26.0628.00 13
0.26.0719.0 14
0.55.0230.0 15
0.55.0231.0 15
1031-A 15
10502SS-1 16
ITEM No. / DESCRIPTION PAGE No.
9401-2518 30
9401-2622 31
9401-3825 31
9401-4024 31
9401-4026 32
9401-4430 32
9405-01 32
9600PK 33
9601PK 33
9D-400-UR&L 33
A-103K 34
A30 35
A55 36
A90 37
ADHESIVE FOAM 37
ADJUSTABLE OVER-CENTRE LATCHES
38
ANTI LOOSE 39
B-120-L 39
BH088-A 39
BH101-A 39
BI-FIX QUARTER TURN FASTENERS 39
Butt Hinge 40
C6 Position Control 40
CAM & INSTALLATION 40
CAMLOCK - FIXED CORE 40
CAMLOCK - REMOVABLE CORE 41
CAMLOCK FIXED CORE WING DRIVER 42
Cams 9100 43
CL118 43
CLLH-1048 44
CLLH-CH906 44
CLLH-CH913 45
CLLH-DHIM3567 45
CLLH-DHIM60 46
ITEM No. / DESCRIPTION PAGE No.
10502SS-9 16
1101-1001-C 17
1190-02 18
1205-304 18
1220-02-10 18
1222-01-10 19
1-240 19
12-450 19
1317-00-10 19
1319-10-10 20
1-400 20
1-475-R&L 20
16720-1-01 21
240-52U 21
2-622-U 21
2-682-PK 22
27-400-52 22
3201-122 22
3-4373-SSX 22
3-4373-X 23
3-point cam 23
475-52U 23
6000 R&L / 1-6000 R&L 24
6102-01 24
6102-02 24
6103-01 24
6103-02 25
6104-01 25
6104-02 25
6105-02-00 25
62 Compression Latch 26
626-KPK 26
628-APK 27
628-APK-MB 27
6301-01 27
8-140 R & L 28
8-240 29
9100-2518 30
9100-4501-8800 30
194
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
ITEM No. / DESCRIPTION PAGE No.
D12-A 46
DHFM-30 47
DHFM-40 47
DHFM-40S 47
DHFM-50 48
DHFM-6090 48
DHFM-6090S 49
DHFM-76 49
DHFM-8060-PC-L 50
DHFMC-2230 50
DHIF-25 51
DHIF-30 51
DHIF-40 52
DHIF-50 52
DZUS ARROW FASTENERS 52
DZUS DART FASTENERS 53
DZUS LION FASTENERS 53
DZUS NYLATCH PANEL FASTENERS 54
DZUS NYLATCH QUARTER TURN FASTENERS
54
DZUS PANEX FASTENERS 54
DZUS PILOT FASTENERS 54
DZUS RAPIER FASTENERS 55
DZUS STANDARD FASTENERS 55
E3 Vise Action, Hand Operated 55
E3 Vise Action, Tool Operated 55
E3 Vise Action, Wing Knob 56
E6 CONTSTANT TORQUE 56
E6-10-101 57
ITEM No. / DESCRIPTION PAGE No.
E6-10-301 57
E6-10-501 57
F6-20-S1A50WL (WR) 58
G6 Position Control 59
Gate Hinge 59
H00117-2RH & LH 60
H00117-RH & LH 60
H00125 Series 61
H00182-LH 61
H00183-RH 62
H00184IL 62
H1002W1-3W1 63
H-18-1 64
H-18-2 65
H-18-3 66
H185/1.0-1.6 66
H185/1.7-2.0 66
H22 67
H-22-B 67
HL009 70
LASHING RINGS 71
Lift Off Hinge 72
LLH-40810100MS-WH 72
M1 Push to Close 72
MP Push to Close 73
P2 Flush Pull Handle 73
Piano Hinge 73
PINCHWELD 73
PINCHWELD 73
PINCHWELD 73
Pinless Butt Hinge 74
Pintle Hinge 74
Plastic Continuous Hinge 74
PT TUBULAR KEY - CAMS & INSTALLATION
74
PT TUBULAR KEY - FIXED CORE 75
ITEM No. / DESCRIPTION PAGE No.
R4 EM Electronic Latch 75
R4 EM Electronic Latch 75
RTH-00002 76
RTH-00003 110
RTH-00004 110
RTH-00005 111
Single point cam 111
SL118 112
SL21062NR 112
SPRING LOADED HINGES 113
SQ118 113
SQ118-1 113
T001 114
T002 114
T003 114
T004 114
T005 115
T006 115
T101 116
T302 116
T308L762 117
T308L762-CW 117
TL118 118
TL818 118
WC701 193
WC702 193
WC704 193
WC705 193
WC706 193
WC707 194
WC711 194
INDEX
PRODUCT INDEX
195
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
INDEX
ITEM No. / DESCRIPTION PAGE No.
Accuride201 85
301 91
363 85
2601 83
2807 80
2907 80
3507 81
3600 92
3601 91
3607 92
3732 83
3832 84
9301 93
9307 94
9308 94
204A-LR 87
301-2590 89
305A-LR 87
3301-3307-3308 88
AL4120 95
AL4140 95
CC11 81
CC9 81
SS0330 96
SS2028 96
SS5321 97
SS5322 97
ITEM No. / DESCRIPTION PAGE No.
Pivot PointBALL PLUNGER 141
BOW-TIE COTTER PINS 143
CLEVIS PINS 134
DETENT RING PINS 147-148
DOUBLE LOOP HAIR PIN COTTER 144
FIXED END NYLON LANYARDS 137
HAIR PIN COTTER 144
LYNCH PINS 146
POSITIVE LOCK PINS 135
PULL PIN 142
RING PINS 136
RUE RING COTTER 145
STEEL LANYARDS 139
TAB LOCK PINS 141
U-LOCK NYLON LANYARDS 138
WIRE LOCK PINS 140
ITEM No. / DESCRIPTION PAGE No.
Frigerio Ettore2.00.00 120
2.00.01 120
2.00.02 120
2.00.03 121
2.00.40 121
2.01.00 121
2.01.01 122
2.02.00 122
2.03.00 122
2.03.01 123
2.03.02 123
2.04.00 123
2.04.01 124
2.05.00 124
2.07.00 125
2.08.00 125
2.09.01 126
2.10.00 126
2.17.00 126
2.18.00 127
2.18.01 127
2.19.00 128
2.22.00 128
2.30.00 128
2.30.02 129
2.40.00 129
2.40.01 129
2.41.00 130
2.41.01 130
2.41.02 130
2.42.00 131
2.43.00 131
2.44.00 131
2.45.00 132
2.46.00 132
2.52.00 132
CL 621/2.05 124
PRODUCT INDEX
196
Ph: +61 3 9388 2551 | F: +61 3 9387 5758 | E: [email protected] | W: www.conceptlatch.com.au
INDEX
ITEM No. / DESCRIPTION PAGE No.
RencolBRIDGE HANDLES 175-176
BUTTON KNOB 165
CONTROL HAND WHEELS 178
CRANKING HANDLE 172
GRIP HANDLE 172
INDEXED CLAMPING HANDLE 173-174
INDEXING PLUNGERS 179-180
KNURLED KNOBS 163-164
LOBE KNOB - SOLID 155
LOBE KNOB COMPLETE WITH CAP
154
LOBE KNOBS 153
OVAL SECTION WHEELS 177
REVOLVING HANDLES 170-171
SCALLOP KNOBS 158-159
SELF ASSEMBLY KNOBS 162
SINGLE MICKEY KNOB 150
SOFT TOUCH LOBE KNOBS 152
STAR KNOBS 160-161
TAPER KNOB 166
TEE HANDLE KNOBS 168-169
THREADED BALL KNOB 167
TRI-STAR KNOBS 157
TWIN MICKEY KNOB 151
WING KNOB 156
COMPACT RAIL 99
TELESCOPIC RAIL 105
ITEM No. / DESCRIPTION PAGE No.
Stabilus
Lift-O-Mat Gas Struts 182-192
PRODUCT INDEX