In the service of heating technology since more than 20 years

COMPUTHERM HEATING EQUIPMENT CATALOGUE

Quantrax Ltd. H-6726 Szeged, Fülemüle u. 34.

Tel.: +36 62 424 133 E-mail: iroda@quantrax.hu

Web: www.quantrax.hu www.computherm.info

The thermostat cannot be programmed but as compared to simple mechanical thermostats, measuring and adjusting temperature becomes significantly more accurate with its digital display. It enables you to set an economy and a comfort temperature, to calibrate the thermometer, to select the switching sensitivity and to switch between the heating and cooling mode. The thermostat can be freely moved within the transmission distance, there is a wireless (radio-frequency) connection between the thermostat and the boiler. The trouble-free operation is ensured by its own security code.We recommend using it in places where programmability is not required, but portability, accurate temperature measurement, accurate temperature setting and switching sensitivity is important. If required, the device can be extended with a COMPUTHERM Q1RX wireless thermostat-controlled socket.The most important technical data of the thermostat (transmitter):

•Adjustabletemperaturerange:5to40°C(in0.5°Cincrements)•Temperaturemeasurementrange:3to45°C(in0.1°Cincrements)•Temperaturemeasurementaccuracy:±0.5°C•Thermometercalibrationrange:approx.3°C•Selectableswitchingsensitivity:±0.1°C;±0.2°C•Batteryvoltage:2x1.5VAAsizeALKALINEbatteries(LR6)•Operatingfrequency:868.35MHz•Transmissiondistance:approx.50minanopenterrain

The COMPUTHERM Q1RX socket has been developed for thermostats COMPUTHERM Q3RF, Q5RF, Q7RF and Q8RF and can be used in addition to/instead of their receiver units. The device is able to control boilers or any other electrical devices operating on 230 V (e.g. fan heaters, pumps, zone valves, etc.). Easy installation and operation, no assembly required. In response to the ON command of COMPUTHERM Q3RF, Q5RF, Q7RF and Q8RF wireless thermostats, a supply voltage of 230 V appears on the output socket of device Q1RX connected to the network, while the OFF command disconnects the device from the network.

•Powerconsumption:0,01W•Supplyvoltage:230VAC,50Hz•Outputvoltage:230VAC,50Hz•Switchablecurrentintensity:16A(3Ainductiveload)

COMPUTHERM Q3Digital Room Thermostat

It cannot be programmed but as compared to simple mechanical thermostats, measuring and adjusting temperature becomes significantly more accurate with its digital display. It enables you to set an economy and a comfort temperature, to calibrate the thermometer, to select the switching sensitivity and to switch between the heating and cooling mode.We recommend using it in places where programmability is not required, but accurate temperature measurement, accurate temperature setting and switching sensitivity is important.•Adjustabletemperaturerange:5to40°C(in0.5°Cincrements)•Temperaturemeasurementrange:3to45°C(in0.1°Cincrements)•Temperaturemeasurementaccuracy:±0.5°C•Thermometercalibrationrange:approx.3°C•Selectableswitchingsensitivity:±0.1°C;±0.2°C•Switchablevoltage:24VAC/DC...250VAC,50Hz•Loadability:8A(2Ainductiveload)•Batteryvoltage:2x1.5VAAsizeALKALINEbatteries(LR6)

COMPUTHERM Q3RFWireless (Radio-Frequency) Digital Room Thermostat

The most important technical data of the receiver unit:•Supplyvoltage:230VAC,50Hz•Switchablevoltage:24VAC/DC...250VAC,50Hz•Loadability:6A(2Ainductiveload)

COMPUTHERM Q2RFWireless (Radio-Frequency)Signal Repeater

The COMPUTHERM Q2RF plug was developed for the COMPUTHERM Q3RF, Q5RF, Q7RF and Q8RF thermostats to increase their wireless range. The original range of Q3RF, Q5RF, Q7RF and Q8RF thermostats is 50 m in open area, which can be significantly shortened by the structure of the building. To be able to use the Q3RF, Q5RF, Q7RF and Q8RF thermostats in larger buildings too, it is advised to use a wireless signal repeater. This can be achieved by using the COMPUTHERM Q2RF wireless repeater: it receives the signals of the wireless thermostats and retransmits the signal to the receiver unit, thus making the range larger.

•Supplyvoltage:230VAC,50Hz•Outputvoltage:230VAC,50Hz•Maximumoutputcurrent:16A(3Ainductiveload)•Powerconsumption:0,5W•Operatingfrequency:868.35MHz

COMPUTHERM Q1RXWireless (Radio-Frequency)Thermostat-Controlled Socket

The Q1RX socket is also available paired with the thermostat Q8RF (TX)!!!

COMPUTHERM Q4ZZone Controller

The COMPUTHERM Q4Z zone controller can control 1 to 4 heating zones, which are regulated by a wired switch-operated thermostat. The zones can operate independently from each other or, in case of need, all zones can operate at the same time. This way only those rooms are heated at a given time, whose heating is required. It receives switching signals from the thermostats, controls the boiler and gives commands to open/close the heating zone valves (max. 4 zones) associated with the thermostats. Any switch-operated room thermostat can be connected to the zone controller, whose output relay has a loadability of 230 V AC, min. 1 A (0.5 A inductive load).•Supplyvoltage:230VAC,50Hz•Voltageofthezoneoutputs:230VAC,50Hz•Loadabilityofthezoneoutputs:1A(0.5Ainductiveload)•Switchablevoltageoftherelaycontrollingtheboiler:230VAC,50Hz•Loadabilityoftherelaycontrollingtheboiler:6A(2Ainductiveload)•Delayperiodoftherelaycontrollingtheboiler:4minutes

The COMPUTHERM Q5RF (TX) thermostat can be used as an extension to the 2 thermostats in the basic package of the COMPUTHERM Q5RF and Q8RF multi-zone thermostats, to increase the number of zones, as well as to control a COMPUTHERM Q1RX wireless socket.There is a wireless (radio-frequency) connection between the COMPUTHERM Q5RF (TX) thermostat and the COMPUTHERM Q5RF / Q8RF receiver unit and/or the COMPUTHERM Q1RX socket, therefore there is no need to lay a cable between the thermostat and the receiver and/or the socket.The thermostat enables you to set an economy and a comfort temperature, to calibrate the thermometer, to select the switching sensitivity and to switch between the heating and cooling mode.•Adjustabletemperaturerange:5to40°C(in0.5°Cincrements)•Temperaturemeasurementrange:3to45°C(in0.1°Cincrements)•Temperaturemeasurementaccuracy:±0.5°C•Thermometercalibrationrange:approx.3°C•Selectableswitchingsensitivity:±0.1°C;±0.2°C•Batteryvoltage:2x1.5VAAALKALINEbatteries(LR6type)•Operatingfrequency:868.35MHz•Transmissiondistance:approx.50minanopenterrain

COMPUTHERM Q5RFMulti-Zone, Wireless (Radio-Frequency)

Digital Room Thermostat

The basic package of the device includes two thermostats and a receiver unit. If required, the equipment can be extended by two additional COMPUTHERM Q5RF (TX) and/or COMPUTHERM Q8RF (TX) thermostats. It is possible to tune both a thermostat and a COMPUTHERM Q1RX wireless socket to zone 1 of the COMPUTHERM Q5RF, thus making it possible to control two different devices at the same time (e.g. starting both the boiler and a circulation pump). The receiver unit receives switching signals from the thermostats, controls the boiler and gives commands to open/close the heating zone valves (max. 4 zones) associated with the thermostats. The zones can operate independently from each other or, in case of need, all zones can operate at the same time. This way only those rooms are heated at a given time, whose heating is required. The thermostats enable you to set an economy and a comfort temperature, to calibrate the thermometer, to select the switching sensitivity and to switch between the heating and cooling mode. The thermostats can be freely moved within the transmission distance, there is a wireless (radio-frequency) connection between the thermostats and the boiler. The trouble-free operation is ensured by its own security code. We recommend using it in places where programmability is not required, but dividing the heating system into zones, portability, accurate temperature measurement, accurate temperature setting and switching sensitivity is important. The most important technical data of the thermostats (transmitters): •Adjustabletemperaturerange:5to40°C(in0.5°Cincrements)•Temperaturemeasurementrange:3to45°C(in0.1°Cincrements)•Temperaturemeasurementaccuracy:±0.5°C•Thermometercalibrationrange:approx.3°C•Selectableswitchingsensitivity:±0.1°C;±0.2°C•Batteryvoltage:2x1.5VAAALKALINEbatteries(LR6type)•Operatingfrequency:868.35MHz•Transmissiondistance:approx.50minanopenterrain

The most important technical data of the receiver unit: •Supplyvoltage:230VAC,50Hz•Voltageofthezoneoutputs:230VAC,50Hz•Loadabilityofthezoneoutputs:1A(0.5Ainductiveload)•Switchablevoltageoftherelaycontrollingtheboiler:24VAC/DC...250VAC,50Hz•Loadabilityoftherelaycontrollingtheboiler:6A(1Ainductiveload)

COMPUTHERM Q5RF (TX) Wireless (Radio-Frequency) Digital Room Thermostat (Without Receiver)

NEWproduct!

NEWproduct!

Separate temperature programs can be prepared for each day of the week. For each day, beside 1 fixed switching time, 6 adjustable switching times can be set and a different temperature can be assigned to all 7 switching times. There are 4 different options to temporarily modify the temperature specified in the program: until the next switch in the program, for a period of 1 to 9 hours, for a period of 1 to 99 days and until the next manual intervention. Furthermore, it enables you to select the switching sensitivity, to calibrate the thermometer, to activate the pump protection function, to switch between the heating and cooling mode and to lock the control buttons.The thermostat can be freely moved within the transmission distance, there is a wireless (radio-frequency) connection between the thermostat and the boiler. The trouble-free oper-ation is ensured by its own security code. We recommend using it in places where there is a need for programmability, furthermore portability, accurate temperature measurement, accurate temperature setting and switching sensitivity is important. If required, the device can be extended with a COMPUTHERM Q1RX wireless thermostat-controlled socket. The most important technical data of the thermostat (transmitter):

•Adjustabletemperaturerange:5to40°C(in0.5°Cincrements)•Temperaturemeasurementrange:3to45°C(in0.1°Cincrements)•Temperaturemeasurementaccuracy:±0.5°C•Thermometercalibrationrange:±3°C(in0.1°Cincrements)•Selectableswitchingsensitivity:±0.1°C;±0.2°C;±0.3°C•Batteryvoltage:2x1.5VAAsizeALKALINEbatteries(LR6)•Operatingfrequency:868.35MHz•Transmissiondistance:approx.50minanopenterrain

The most important technical data of the receiver unit:

•Supplyvoltage:230VAC,50Hz•Switchablevoltage:24VAC/DC...250VAC,50Hz•Loadability:6A(2Ainductiveload)

COMPUTHERM Q7Programmable Digital Room Thermostat

COMPUTHERM Q7RF (RX)Wireless (Radio-Frequency) receiver unit for COMPUTHERM room thermostats

Separate temperature programs can be prepared for each day of the week. For each day, beside 1 fixed switching time, 6 adjustable switching times can be set and a different temperature can be assigned to all 7 switching times. There are 4 different options to temporarily modify the temperature specified in the program: until the next switch in the program, for a period of 1 to 9 hours, for a period of 1 to 99 days and until the next manual intervention. Furthermore, it enables you to select the switching sensitivity, to calibrate the thermometer, to activate the pump protection function, to switch between the heating and cooling mode and to lock the control buttons.We recommend using it in places where there is a need for programmability, furthermore accurate temperature measurement, accurate temperature setting and switching sensitiv-ity is important.•Adjustabletemperaturerange:5to40°C(in0.5°Cincrements)•Temperaturemeasurementrange:3to45°C(in0.1°Cincrements)•Temperaturemeasurementaccuracy:±0.5°C•Thermometercalibrationrange:±3°C(in0.1°Cincrements)•Selectableswitchingsensitivity:±0.1°C;±0.2°C;±0.3°C•Switchablevoltage:24VAC/DC...250VAC,50Hz•Loadability:8A(2Ainductiveload)•Batteryvoltage:2x1.5VAAsizeALKALINEbatteries(LR6)

The COMPUTHERM Q7RF (RX) wireless receiver unit can operate with the COMPUTHERM Q3RF, COMPUTHERM Q5RF, COMPUTHERM Q7RF and COMPUTHERM Q8RF wireless thermostats. Controlled by a wireless COMPUTHERM thermostat, the COMPUTHERM Q7RF (RX) switched-mode receiver unit is suitable to regulate the overwhelming majority of boilers and air conditioners. It can easily be connected to any gas boiler or air conditioning device that has a double wire connector for a room thermostat, regardless of whether it has a 24 V or 230 V control circuit.If you would like to make your gas convectors controllable by thermostat using a COMPUTHERM KonvekPRO controller and a COMPUTHERM wireless thermostat, and you would like to control multiple convectors from the same thermostat, then you can accomplish this using the COMPUTHERM Q7RF (RX) receiver unit. A COMPUTHERM wireless thermostat can be simultaneously tuned together with multiple COMPUTHERM Q7RF (RX) receiver units, thus making it possible to control multiple gas convectors simultaneously.•Supplyvoltage:230VAC,50Hz•Switchablevoltage:24VAC/DC...250VAC,50Hz•Loadability:6A(2Ainductiveload)•Range:approx.50minanopenterrain

COMPUTHERM Q7RFWireless (Radio-Frequency) Programmable Digital Room Thermostat

COMPUTHERM Q8RFMulti-Zone, Wireless (Radio-Frequency) Programmable Digital Room Thermostat

The basic package of the device includes two thermostats and a receiver unit. If required, the equipment can be extended by two COMPUTHERM Q5RF (TX) and/or COMPUTHERM Q8RF (TX) thermostats. It is possible to tune both a thermostat and a COMPUTHERM Q1RX wireless socket to zone 1 of the COMPUTHERM Q8RF, thus making it possible to control two different devices at the same time (e.g. starting both the boiler and a circulation pump).The receiver unit receives switching signals from the thermostats, controls the boiler and gives commands to open/close the heating zone valves (max. 4 zones) associated with the thermostats. The zones can operate independently from each other or, in case of need, all zones can operate at the same time. This way only those rooms are heated at a given time, whose heating is required. Separate temperature programs can be prepared for each day of the week. For each day, beside 1 fixed switching time, 6 adjustable switching times can be set and a different temperature can be assigned to all 7 switching times.There are 4 different options to temporarily modify the temperature specified in the program:• until the next switch in the program• for a period of 1 to 99 hours• for a period of 1 to 99 days • until the next manual intervention.Furthermore, the thermostats enable you to select the switching sensitivity, to calibrate the thermometer, to activate the pump protection function, to switch between the heating and cooling mode and to lock the control buttons.The thermostats can be freely moved within the transmission distance, there is a wireless (radio-frequency) connection between the thermostats and the boiler. The trouble-free operation is ensured by its own security code.We recommend using it in places where there is a need for programmability and for dividing the heating system into zones, furthermore portability, accurate temperature measurement, accurate temperature setting and switching sensitivity is important.

The most important technical data of thermostats (transmitters):•Adjustabletemperaturerange:5to40°C(in0.5°Cincrements)•Temperaturemeasurementrange:3to45°C(in0.1°Cincrements)•Temperaturemeasurementaccuracy:±0.5°C•Thermometercalibrationrange:±3°C(in0.1°Cincrements)•Selectableswitchingsensitivity:±0.1°C;±0.2°C;±0.3°C•Batteryvoltage:2x1.5VAAsizeALKALINEbatteries(LR6)•Operatingfrequency:868.35MHz•Transmissiondistance:approx.50minanopenterrain

The most important technical data of the receiver unit:

•Supplyvoltage:230VAC,50Hz•Voltageofthezoneoutputs:230VAC,50Hz•Loadabilityofthezoneoutputs:1A(0.5Ainductiveload)•Switchablevoltageoftherelaycontrollingtheboiler:

24VAC/DC...250VAC,50Hz•Loadabilityoftherelaycontrollingtheboiler:

6A(1Ainductiveload)

COMPUTHERM Q8RF (TX) Wireless (Radio-Frequency) Programmable Digital Room Thermostat (Without Receiver)

The COMPUTHERM Q8RF (TX) thermostat can be used as an extension to the 2 thermostats in the basic package of the COMPUTHERM Q5RF and Q8RF multi-zone thermostats, to increase the number of zones, as well as to control a COMPUTHERM Q1RX wireless socket.There is a wireless (radio-frequency) connection between the COMPUTHERM Q8RF (TX) thermostat and the COMPUTHERM Q5RF / Q8RF receiver unit and/or the COMPUTHERM Q1RX socket, therefore there is no need to lay a cable between the thermostat and the receiver and/or the socket.Separate temperature programs can be prepared for each day of the week. For each day, beside 1 fixed switching time, 6 adjustable switching times can be set and a different temperature can be assigned to all 7 switching times. The thermostat enables you to select the switching sensitivity, to calibrate the thermometer, to activate the pump protection function, to switch between the heating and cooling mode and to lock the control buttons.

•Adjustabletemperaturerange:5to40°C(in0.5°Cincrements)•Temperaturemeasurementrange:3to45°C(in0.1°Cincrements)•Temperaturemeasurementaccuracy:±0.5°C•Thermometercalibrationrange:±3°C(in0.1°Cincrements)•Selectableswitchingsensitivity:±0.1°C;±0.2°C;±0.3°C•Batteryvoltage:2x1.5VAAsizeALKALINEbatteries(LR6)•Operatingfrequency:868.35MHz•Transmissiondistance:approx.50minanopenterrain

COMPUTHERM TR-010Mechanical Room Thermostat

It is a conventional mechanically-operated room thermostat which is primarily recom-mended wherever reliability and easy handling are important. Its operation does not require any auxiliary energy, i.e. batteries need not be replaced.

•Adjustabletemperaturerange:10to30°C

•Switchingsensitivity:±1°C

•Switchablevoltage:24VAC/DC...250VAC,50Hz

•Loadability:10A(3Ainductiveload)

COMPUTHERM B220Wi-Fi Switch

The COMPUTHERM B220 Wi-Fi switch is a switched/impulse mode device that can be controlled from smartphones, tables and computers through the internet. We primarily recommend it for the remote or programmed control of garage doors, front doors, irrigation systems and other electronic equipment. It can easily be connected to any device that can be controlled with steady or impulsive open/close contact, irrespective of whether the device has a 12 V, 24 V or 230 V control circuit. It can be easily controlled through the Internet, and its state (ON/OFF) can be continuously monitored. It provides an opportunity for manual switching, opening/closing of electronic doors/gates and for automatic timed control of devices. It is possible to add multiple COMPUTHERM B220 Wi-Fi switches, even from different locations, to the same user account.

•Powersupplyvoltage:8-36VAC/DC

•Outputloadability:max.230VAC;3A(1Ainductiveload)

•Operatingfrequency:Wi-Fi(b/g/n)2.4GHz

COMPUTHERM KonvekPROGas Convector Controller

The COMPUTHERM KonvekPRO gas convector controller is suitable to regulate the overwhelming majority of gas convectors. It can easily be connected to any gas convector, that regulates itself using the probe of its thermostat (a copper cartridge containing expansive liquid, connected to the thermostat using a capillary tube).

With the help of a COMPUTHERM KonvekPRO controller it is easy to implement the automatic, programmable heating of a room equipped with a gas convector. The product also provides an opportunity for controlling the convector from anywhere using a Wi-Fi thermostat.

•VoltageofDCadapter:DC12V,500mA•DCadapterconnector:2.1x5.5mm•Powerconsumption:max.3W(operative1.5W)•Diameterofattachablethermostatprobe(tubethermostat):6-12mmNEW

product!

NEWproduct!

COMPUTHERM B300RFWi-Fi Thermostat With Wireless Temperature Sensor

COMPUTHERM B300Wi-Fi Thermostat With Wired Temperature Sensor

The COMPUTHERM B300 thermostat can be used to control the device (e.g. boiler) connected to it and to check its current state using your smartphone, tablet or computer via the Internet.

This product is an ideal choice to everyone as with its favourable price and its state-of-the-art technology it reduces energy costs while maintaining comfort. With the help of this product you will be able to control the heating of your flat, house or holiday home anytime, from anywhere. It is especially useful if you are not using your flat or house based on a regular schedule, you are travelling away from you home for an indefinite time during the heating season or you would like to use you holiday home during the heating season.

•Adjustabletemperaturerange:-55°C—+100°C(in0.1°Cincrements)•Temperaturemeasurementaccuracy:±0.5°C(between-10°Cand+85°C)•Selectableswitchingsensitivity:0°C—±75°C(in0.1°Cincrements)•Outputloadability:max.230VAC;16A(4Ainductiveload)•Powersupplyvoltageofthemainunit:230VAC;50-60Hz•Operatingfrequencyofthemainunit:Wi-Fi(b/g/n)2.4GHz

The COMPUTHERM B300RF thermostat can be used to control the device (e.g. boiler) connected to it and to check its current state using your smartphone, tablet or com-puter via the Internet.This product is an ideal choice to everyone as with its favourable price and its state-of-the-art technology it reduces energy costs while maintaining comfort. With the help of this product you will be able to control the heating of your flat, house or holiday home anytime, from anywhere. It is especially useful if you are not using your flat or house based on a regular schedule, you are travelling away from you home for an indefinite time during the heating season or you would like to use you holiday home during the heating season.There is a wireless connection between the temperature sensor and the main unit, therefore the location of the temperature sensor can also be changed during use.•Adjustabletemperaturerange:-55°C—+100°C(in0.1°Cincrements)•Temperaturemeasurementaccuracy:±0.5°C(between-10°Cand+85°C)•Selectableswitchingsensitivity:0°C—±75°C(in0.1°Cincrements)•Outputloadability:max.230VAC;16A(4Ainductiveload)•Powersupplyvoltageofthemainunit:230VAC;50-60Hz•Operatingfrequencyofthemainunit:Wi-Fi(b/g/n)2.4GHz•Power supply voltageof the temperature sensor:2 x1.5VAAsizeALKALINE

batteries(LR6)•Operatingfrequencyofthetemperaturesensor:433MHz•Transmissiondistanceofthetemperaturesensor:approx.250minopenterrain

The COMPUTHERM E280 and E300 thermostats can be used to control the device (e.g. boiler) connected to them and to check its current state using your smartphone or tablet via the Inter net. With the help of these products the heating/cooling system of your flat, house or holiday home can be made controllable from any place and at any time. These products are especially useful when you do not use your flat or house according to a predefined schedule, you leave your home for an uncertain period of time during the heating season or you intend to use your holiday home during the heating season as well. The thermostats are especially suitable for controlling underfloor heating systems owing to the connectable floor temperature sensor. The thermostats have two potential free relays which switch simultaneously therefore they are able to control two independent apparatuses. The two parallel operating relays simply ensure that the thermostats can activate or turn on or off a pump and a zone valve, in addition to starting up the boiler. Thus, using several COMPUTHERM E280 and/or E300 type Wi-Fi thermostats, a heating system can be easily divided into zones without a separate zone control system. The COMPUTHERM E300 Wi-Fi thermostat is a more advanced version of the COMPUTHERM E280 Wi-Fi thermostat, with black instead of white colour, glass screen and even more modern display.• Temperaturemeasuringrange(floorandinternaltemperaturesensors):0°C–50°C

(in0.5°Csteps)• Temperaturemeasurementaccuracy(floorandinternaltemperaturesensors):+/-1°C• Adjustablemeasuringrange:5°C–99°C(in0.5°Csteps)• Switchsensitivity:+/-0.5°C• Thermometercalibrationrange:±5°C(in0.5°Csteps)• Supplyvoltageforthethermostat:200-240VAC;50/60Hz• Outputloadability(K1andK2):Max.230VAC;3A(1Ainductiveload)• Operatingfrequency:Wi-Fi(b/g/n)2.4GHz• Standbypowerconsumption:0.5W

COMPUTHERM E280 and E300

Wi-Fi thermostat for radiator and underfloorheating systems

NEWproduct!

COMPUTHERM S200Wi-Fi socket

COMPUTHERM S300Wi-Fi thermostat

By means of the COMPUTHERM S200 type Wi-Fi socket the connected apparatus (e.g. gas boiler) can be controlled via the Internet and its operation can be checked by your cell phone or tablet.

This product is an excellent choice for those who wish to control an electric device installed in their home via the Internet. In addition to providing convenience, this reasonably priced apparatus may contribute to reducing costs. A heating system controlled by an existing thermostat and complemented with a COMPUTHERM S200 Wi-Fi socket can be made remotely controllable by means of a smartphone via the Internet.

This product is especially useful when you do not use your flat or house according to a predetermined schedule, you leave your home for an uncertain period of time or you wish to control or check the heating of your holiday home remotely during the heating season.

Within the load limits, the remote control of any mains powered electrical device (e.g. watering pump, refrigerator, etc.) can be solved easily with the COMPUTHERM S200 socket. You can turn on/off the devices connected to the product remotely and scheduled power on/off is also possible.

• Supplyvoltageforthesocket:90-230VAC;50/60Hz• Outputloadabilityofthesocket:10A(2Ainductive)• Standbypowerconsumption:0.1W• Operatingfrequency:Wi-Fi(b/g/n)2.4GHz

By means of the COMPUTHERM S300 type Wi-Fi thermostat the connected apparatus (e.g. gas boiler) can be controlled via the Internet and its operation can be checked by your cell phone or tablet.This product is an excellent choice for those who wish to control an electric device installed in their home via the Internet. In addition to providing convenience, this reasonably priced apparatus may contribute to reducing costs. A heating system controlled by an existing thermostat and complemented with a COMPUTHERM S300 Wi-Fi thermostat can be made remotely controllable by means of a smartphone via the Internet. This product is especially useful when you do not use your flat or house according to a predetermined schedule, you leave your home for an uncertain period of time or you wish to control or check the heating of your holiday home remotely during the heating season. Within the load limits, the remote control of any mains powered electrical device (e.g. watering pump, refrigerator, etc.) can be solved easily with the COMPUTHERM S300 thermostat, depending on the temperature or humidity. You can turn on/off the devices connected to the product remotely and scheduled power on/off is also possible.

• Supplyvoltageforthethermostat:90-230VAC;50/60Hz• Standbypowerconsumption:0.1W• Temperaturemeasuringrange:-20°C–+70°C• Temperaturemeasurementaccuracy:+/-0.5°C• Adjustablemeasuringrange:-20°C–+70°C• Humiditymeasuringrange:0-100%RH• Humiditymeasurementaccuracy:+/-2%RH• Adjustablehumidityrange:0-100%RH• Switchsensitivity:+/-1°C(temperature);1%RH(humidity)• Outputvoltageofthethermostat:90-230VAC(identicalwiththeinputvoltage)• Outputloadabilityofthethermostat:16A(3Ainductive)• Operatingfrequency:Wi-Fi(b/g/n)2.4GHz

COMPUTHERM S100Wi-Fi sensor centre

The COMPUTHERM S100 Wi-Fi sensor centre is able to provide continuous information on environmental data (air temperature, humidity, noise level, luminous intensity) at the place of installation via the Internet, and, based on measured and set values, is able to control the paired COMPUTHERM S200 socket via a Wi-Fi network.

We offer the installation of COMPUTHERM S100 Wi-Fi sensor centre to those who wish to monitor environmental parameters at the place of installation and to control their COMPUTHERM S200 socket from another room via wireless means through a Wi-Fi network.

For example, with the installation of the COMPUTHERM S100 Wi-Fi sensor centre a boiler connected to a COMPUTHERM S200 socket in the basement of a house can be easily controlled by the temperature measured in the sitting room upstairs or freezing can be prevented without having to lay a cable.

• Storagetemperature:-40°C…+80°C• Operatingtemperature:-20°C–+70°C• Temperaturemeasuringrange:-0°C–+50°C• Temperaturemeasurementaccuracy:+/-2°C• Humiditymeasuringrange:20–80%RH• Humiditymeasurementaccuracy:+/-5%RH• Powersupplyvoltage:microUSB5V• Standbypowerconsumption:0.1W(230V;50Hz)• Operatingfrequency:Wi-Fi(b/g/n)2.4GHz• Permissiblerelativehumidity:max.80%withoutcondensation• Typeofthebuilt-inmicrophone:electriccondensermicrophone• Typeofthebuilt-inlightsensorprobe:GM5528photoresistor• Typeofthebuilt-inairpollutionprobe:GP2Y1010AU0Fopticalairpollutionsensor

COMPUTHERM tube/boiler thermostatsThe probe of the thermostats detects the temperature of the material stagnating or flowing in the pipe/boiler and, in response to a temperature change, it provides a potential-free electrical closing/ opening contact at the adjusted temperature. We primarily recommend using them to control pumps for underfloor heating and hot water circulation.

WPR-90GD Tube Thermostat

WPR-90GETube/Boiler Thermostat with Immersion Sleeve

WPR-90GCCapillary Tube/Boiler Thermostat with Immersion Sleeve

•Adjustabletemperaturerange:10to90°C•Switchingsensitivity:±2.5°C•Switchablevoltage:max.250VAC,50Hz•Loadability:16A(4Ainductiveload)•Protectionagainstenvironmentalimpacts:IP40•Maximumenviromenttemperature:80°C(110°Cfortheprobe)

•Adjustabletemperaturerange:10to90°C•Switchingsensitivity:±2.5°C•Switchablevoltage:max.250VAC,50Hz•Loadability:16A(4Ainductiveload)•Connectiondimensionsofthesleevepipe:G=1/2”;Ø8x100mm•Protectionagainstenvironmentalimpacts:IP40•Maximumenviromenttemperature:80°C(110°Cfortheprobe)

•Adjustabletemperaturerange:0to90°C•Switchingsensitivity:±2.5°C•Switchablevoltage:max.250VAC,50Hz•Loadability:16A(4Ainductiveload)•Connectiondimensionsofthesleevepipe:G=1/2”;Ø8x80mm•Lengthofthecapillarytube:1m•Protectionagainstenvironmentalimpacts:IP40•Maximumenviromenttemperature:80°C(110°Cfortheprobe)

COMPUTHERM HT-3000Gas Leak Detector

The device is suitable to detect and indicate gas leaks in gas pipelines, liquefied gas/gas tanks, gas cylinders, gas lamps, welding torches, gas equipment, etc. Acoustic and light signals warn you of a gas leak. It cannot be used for continuous operation, only for short tests or inspections.•Detectablegases:naturalgas,autogas(LPG)•Measurementrange:Naturalgas:1000ppm-6500ppm Autogas(LPG):500ppm-6500ppm•Workingconditions:from-20°Cto+55°C,withrelativehumiditylowerthan95%•Batteryvoltage:2x1.5VAAsizeALKALINEbatteries(LR6)•Workingcurrent:200mA•Responsetime:lessthan5seconds•Alarmmethod:acousticandlightsignals•Alarmsoundvolume:atleast65dB

COMPUTHERM GSM158GSM Thermostat/Socket

The COMPUTHERM GSM158 GSM thermostat/socket is an intelligent appliance that is connected to the mains voltage. Controlled by making a phone call or sending an SMS from a mobile phone the mains voltage appears or disappears on its output plug.All the settings and functions of the device can be changed and used by SMS commands. The device sends notifications to the user about the made changes/switches in SMS.The GSM158 thermostat/socket is also perfectly suitable to control your heating/cooling equipments in your home or weekend house remotely. By connecting the thermometer to the device, it can be used to hold the temperature of the room/building inside a preset interval, thus it can be used to avoid frost in your home or weekend house during winter. Further, using the turn on/off commands from a mobile phone, the device gives opportunity to start the heating remotely (for example, by using the device in a weekend house in winter, the heating can be started before arrival, making your stay more comfortable).The GSM158 thermostat/socket can be used with a SIM card of any GSM provider before the SIM card’s expiration-date.•Supplyvoltage:220-250V/50Hz•Maximumloadability:230V/50Hz;15A•Standbypowerconsumption:0,15W•GSMfrequencybands:DCS1800,PCS1900,GSM850,EGSM900

MF01 (3-8 ways)1” collection manifold with built in valveconnection dimensions of regulators: M30 x 1.5mm

MF02 (3-8 ways)1” distribution manifold with built in valve

MF03 (3-8 ways)1” distribution manifold with flowmeters

MF04combined connector for DN25 pump withthermometer and immersion sleeve (one pair)

MF051” x 1/2” x 1/2” end piece

MF061” compression straight coupling

MF07connector for Ø16 and Ø20 mmplastic pipes

MF08bracket (one pair)

MF091/2” air vent

MF101/2” purge valve

(with red or blue handle)

MF111/2” thermometer

20-80 °C

COMPUTHERM manifold and fittings

COMPUTHERMradiator valve/zone valve; 2- and 3-way valve

We recommend using the valves to regulate heat emission from radiators or to sectionalize heating zones. Its connection dimensions are adapted to commonly used equipments, i.e. it can be easily connected to radiators, manifolds or directly to the pipe network. The valve can be regulated by a manual control button, a thermostat head or an electro-thermal actuator. Connection dimensions of controlling equipment (thermostat head, actuator): M30x1.5 mm

DN15-A DN20-2/25-2 DN20-3/25-3

The CPA low-energy circulation pumps are designed for the circulation of water in one-pipe, two-pipe, radiator-based and underfloor heating systems. The permanent-magnet motor and the modern electronic control of the pump enables the pump to adapt its performance to the current needs of the heating system automatically. Because of this, the energy consumption of these pumps are significantly lower than the consumption of conventional pumps, and they are classified as Energy Efficiency Class A pumps.

COMPUTHERM CPA20-6; CPA25-6Energy class A circulation pump

•Workingvoltage:230VAC;50/60Hz•Max.mediumtemperature:+2°C–+110°C•Max.workingpressure:10bar•Maxfreeairtemperature:max.40°C•Max.head:6m•Max.flow:2,8m3/h(CPA20-6),3,2m3/h(CPA25-6)•Nominalwidth:G1”(CPA20-6);1½”(CPA25-6)•Porttoportlength:130mm(CPA20-6);180mm(CPA25-6)•Motorperformance:5-45W•Energylabel:“A”• Insulationlabel:H•Typeofthemotor:inductionmotor•Materialofthemotor:castiron•Materialoftherunner:PES•EEI:<0.23•Protectionagainstenvironmentalimpacts:IP44

COMPUTHERM DF-110EElectro-Thermal Actuator

The valve actuator is 2-point controlled and is electro-thermally operated. It can be mounted on zone valves and manifolds using its flare nut. With factory default setting and in its non-voltage state the actuator keeps the valve closed, while it opens the valve in response to 230V voltage in a couple of minutes. If required, its operation can be easily inverted to keep the valve opened in its non-voltage state. The open or closed position of the valve is indicated by the axial displacement/position of the pin located on the front panel of the actuator. In closed position the pin sinks into the front panel, in opened position the pin raises some millimeters above the front panel. The simple electro-thermal construction ensures reliable operation and low energy consumption.•Supplyvoltage:230VAC,50Hz•Max.current:~150mA•Powerconsumption:3W•Dimensionsoftheflarenut:M30x1.5mm•Opening/closingperiod:approx.4.5minutes(25°C)•Openingforce:90-125N•Innon-voltagestatethevalveis:opened/closed,basedonitssetting•Protectionagainstenvironmentalimpacts:IP40•Lenghtofconnectingcable:1m•Maximumstroke:~4mm

name size type Kvs

2-way valve

1/2” DN15-A 1,8

3/4” DN20-2 3,5

1” DN25-2 5

3-way valve3/4” DN20-3 3,5

1” DN25-3 5

NEWproduct!

COMPUTHERM DF-230Electro-Thermal Actuator

The valve actuator is 2-point controlled and is electro-thermally operated. It can be mounted on zone valves and manifolds using its flare nut. In its non-voltage state the actuator keeps the valve closed, while it opens the valve in response to 230V voltage in a couple of minutes. The open or closed position of the valve is indicated by the axial displacement/position of the grey cylinder located on the front panel of the actuator. In closed position the cylinder sinks into the front panel, in opened position the cylinder raises some millimeters above the front panel. The simple electro-thermal construction ensures reliable operation and low energy consumption.

•Supplyvoltage:230VAC,50Hz•Max.current:~50mA•Powerconsumption:2W•Dimensionsoftheflarenut:M30x1.5mm•Opening/closingperiod:approx.4minutes(25°C)•Openingforce:120N•Innon-voltagestatethevalveis:closed•Protectionagainstenvironmentalimpacts:IP41•Lenghtofconnectingcable:1m•Maximumstroke:~4mm

The probe of the thermostat head with capillary tube mounted on a control valve detects the temperature of the material stagnating or flowing in the pipeline by means of a pipe sleeve, and opens or closes the valve whenever the temperature of the material is below or above the temperature set in the temperature scale. It is primarily intended to adjust or limit the temperature of the underfloor heating system.

•Adjustabletemperaturerange:20to60°C•Dimensionoftheflarenut:M30x1.5mm•Dimensionsoftheimmersionsleeve:G=1/2”;L=140mm•Lengthofthecapillarytube:2m

The ISO Quality Assurance System used in the manufacturing process guarantees high quality level of the products. Based on the tests conducted according to EU directives, the devices are entitled to bear the conformity marking.

COMPUTHERM TF-13Temperature Regulating Thermostat Head with a Capillary Tube