computer system settings checklist · the acusport® retail technology group (rtg) provides this...
TRANSCRIPT
-
© 2015 AcuSport Corporation
Computer System Settings Checklist
February 2018
-
2 AXIS™ Retail Management System
Notices Copyright © 2015 AcuSport Corporation. 940 Industrial Drive, Suite 107 Sauk Rapids, MN 56379 1-800-547-7120 All rights reserved.
General
No part of this document may be reproduced, distributed, performed, displayed, or used to prepare a derivative work without the prior and express written consent of AcuSport Corporation (“AcuSport”). The software described in this document is furnished under a license agreement and may be used only in accordance with the terms and conditions of the license agreement. Information in this document is subject to change without notice, and AcuSport assumes no responsibility for errors.
Trademarks and Credits
ACUSPORT, AXIS, AXIS Retail Management System (AXIS RMS), AXIS Data Center, AXIS Register, and AXIS E4473 are trademarks of AcuSport and shall not be used without the express written permission of AcuSport.
Other trademarks, such as QuickBooks, are not being used as a trademark herein and are the property of the respective owners.
Legal Counsel
This program, printed documentation, and documents should not be used as a substitute for professional advice in specific situations. The procedures, images, and examples in this document are for illustrative purposes only and may not be applicable in your setting due to differences in preference, settings, and/or state and local regulations.
The following notice is required by law:
AcuSport products and services are not a substitute for the advice of an Attorney. You are encouraged to seek the advice of your own attorney concerning the use and legality of this program, documentation, and forms.
Publication Information
Computer System Settings Checklist
February 2018
-
Computer System Settings Checklist 3
Contents
Overview ........................................................................................................................ 4
Checking System Settings ........................................................................................... 5 Device Manager........................................................................................................ 5 User Account Control .............................................................................................. 9 Firewall Ports ........................................................................................................... 9
-
4 AXIS™ Retail Management System
Overview The AcuSport® Retail Technology Group (RTG) provides this document as guide to checking system settings on a machines running the AXIS RMS software.
-
Computer System Settings Checklist 5
Checking System Settings
Device Manager
1. From the Windows 10/7 operating system.
2. Left-click the Windows logo in the lower left of the screen or select Start from bottom
left task bar.
3. Select Control Panel as shown.
4. If you see the screen below set to Category View
5. Select the drop down on the right-hand side and change to small or large icons.
6. Locate and select Device Manager
► Note: Leave Control Panel Open as you will use it later
-
6 AXIS™ Retail Management System
Write Caching
1. In Device Manager
2. Expand Disk Drives.
3. On the Disk Drive right-click and select Properties
4. On the tab select Policies and Uncheck Enable write caching on the device
5. Click on OK.
-
Computer System Settings Checklist 7
Power Management
1. Expand Network adapters,
2. Select the network card,
a. Right-click on it and select properties.
b. Select Power Management tab
c. Uncheck Allow the computer to turn off this device to save power
d. click OK.
3. Expand Universal Serial Bus Controllers
4. Right-click each Generic USB Hub and Root Hub
5. Select Properties.
6. Click the Power Management Tab
7. Uncheck all boxes
8. Click OK and you can exit from Device Manager.
9. Go back to Control Panel
10. Choose Power Options.
11. Place the Radio Button in Balanced (recommended)
-
8 AXIS™ Retail Management System
12. Select Change Plan Settings.
13. Once in the plan settings.
14. Change the option to put the computer to sleep to never.
a. If this is a laptop change this for on battery as well.
15. Choose Change advanced power settings.
16. Expand Hard Disk
17. Change Turn off hard disk after to never.
18. Change Sleep after, Allow Hybrid Sleep and Hibernate after to never.
-
Computer System Settings Checklist 9
19. Under USB Settings
20. Expand USB selective suspend setting and disable.
21. Click Apply
22. Click OK and Save Changes.
User Account Control
1. From the Control Panel
2. Select User Accounts
3. Change User Account Control Settings.
4. Move the slider to never notify
5. Press Ok.
► Note: You must reboot to save this change.
Firewall Ports
1. From Control Panel Select Windows Firewall
2. Click Advanced Settings on the middle left of the screen.
3. In the inbound and outbound rule verify there is a rule called Axis or Axis Ports.
a. If not call RTG to add.
b. If rule is in place double-click on each,
-
10 AXIS™ Retail Management System
c. Click on the protocols and ports tab and confirm ports 1433, 8732, 8733 and
8744 are listed.
d. If so close this and exit back to the desktop.