componentes de torre de perforacion rotaria
TRANSCRIPT
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
1/130
Presentacion Componentes de una Torre
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
2/130
Componentes de una Torre de
Perforacion Rotaria
1. Torre o Mastil y Subestructura
2. Energia y Potencia Primaria
3. Componentes de Elevacion
4. Componentes de Rotacion
5. Componentes de Circulacion
6. Componentes de Control de Pozo
7. Equipos de Manipulacion Tubular y Tubulares
8. Trepanos
9. Herramientas de Pesca
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
3/130
Componentes de una Torre de
Perforacion Rotaria
1. Torre o Mastil y Subestructura
2. Energia y Potencia Primaria
3. Componentes de Elevacion
4. Componentes de Rotacion
5. Componentes de Circulacion
6. Componentes de Control de Pozo
7. Equipos de Manipulacion Tubular y Tubulares
8. Trepanos
9. Herramientas de Pesca
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
4/130
1. Torre o Mastil y Subestructura
Torre
A large load bearing structure, usually of bolted construction. The
standard derrick has four legs standing at the corners of the substructure.
Una gran estructura de carga, por lo general de construccin atornillada.
La torre estandar tiene cuatro patas levantadas en la esquinas de la
subestructura.
Componentes de una Torre de
Perforacion Rotaria
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
5/130
Componentes de Torre de
Perforacion Rotaria
1. Torreo o Mastil y Subestructura
Mastil
Es una Torre Portatil que puede levantarse en una sola. Es
transportado por tierra, el mastil puede estar dividido en dos o mas
secciones.
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
6/130
1. Derrick or Mast and Substructure
Substructure
The foundation in which the derrick or mast and usually the
Drawworks sit. In contains space for storage and well control
equipment.
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
7/130
2. Potencia y Energia Primaria
1. Torre o Mastil y Subestructura
Componentes de Torre de
Perforacion Rotaria
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
8/130
2. Potencia y Energia Primaria
Motor de Combustion interna o Turbinaque son la fuente de energia
que se manejan en el equipo de la torre.
A drilling rig in which the source of power is one or more internal-
combustion engine and in which power is distributed to rig
components through devices such as chains, sprockets, clutches
and shaft is said to be a Mechanical Rig.
Componentes de Torre de
Perforacion Rotaria
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
9/130
Rotary Drilling Rig Components
Internal combustion engine or a turbine that is the source of power
for driving equipment on the Rig.
A drilling rig in which the source of power is one or more internal-
combustion engine and in which power is distributed to rig
components through devices such as chains, sprockets, clutches
and shaft is said to be a Mechanical Rig.
2. Power and Prime Movers
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
10/130
Internal combustion engine or a turbine that is the source of power
for driving equipment on the Rig.
A drilling rig in which the source of power is effected by the
combination of engines, generator set, control system and electric
motors is said to be a Electric Drilling Rig.
2. Power and Prime Movers
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
11/130
Internal combustion engine or a turbine that is the source of power
for driving equipment on the Rig.
A drilling rig in which the source of power is effected by the
combination of engines, generator set, control system and electric
motors is said to be a Electric Drilling Rig.
2. Power and Prime Movers
Rotary Drilling Rig Components
DC-DC System
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
12/130
Internal combustion engine or a turbine that is the source of power
for driving equipment on the Rig.
A drilling rig in which the source of power is effected by the
combination of engines, generator set, control system and electric
motors is said to be a Electric Drilling Rig.
2. Power and Prime Movers
Rotary Drilling Rig Components
AC-DC System
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
13/130
2. Power and Prime Movers
1. Derrick or Mast and Substructure
3. Hoisting Component
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
14/130
3. Hoisting Component
Rotary Drilling Rig Components
The Rig Equipment responsible for the raising and lowering of the
Drillstring. Consist of the following:
1. Mast or Derrick
2. Drawworks
3. Crown Block
4. Traveling Block
5. Deadline Anchor
6. Supply Reel
7. Drilling Line
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
15/130
3. Hoisting Component
Rotary Drilling Rig Components
The hoisting mechanism on a drilling rig. It is essentially a winch that
spools off or takes in the drilling line and thus raises or lowers the
drillstring.
2. Drawworks
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
16/130
3. Hoisting Component
Rotary Drilling Rig Components
An assembly of sheaves mounted on beams at the top of the
derrick/mast and over which the drilling line is reeved.
3. Crown Block
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
17/130
3. Hoisting Component
Rotary Drilling Rig Components
An assembly of sheaves mounted on beams at the top of the
derrick/mast and over which the drilling line is reeved.
3. Crown Block
FAST SHEAVE
CROWN SHEAVE
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
18/130
3. Hoisting Component
Rotary Drilling Rig Components
An assembly of sheaves mounted on beams at the top of the
derrick/mast and over which the drilling line is reeved.
3. Crown Block
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
19/130
3. Hoisting Component
Rotary Drilling Rig Components
An assembly of sheaves mounted on beams at the top of the
derrick/mast and over which the drilling line is reeved.
3. Crown Block
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
20/130
3. Hoisting Component
Rotary Drilling Rig Components
An assembly of sheaves or pulleys through which the drilling line is
reeved and which moves up and down in the Derrick or Mast.
4. Traveling Block
BLOCK HOOK
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
21/130
3. Hoisting Component
Rotary Drilling Rig Components
An assembly of sheaves or pulleys through which the drilling line is
reeved and which moves up and down in the Derrick or Mast.
4. Traveling Block
TRAVELING BLOCK WITH DYNAPLEX HOOK
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
22/130
3. Hoisting Component
Rotary Drilling Rig Components
An assembly of sheaves or pulleys through which the drilling line is
reeved and which moves up and down in the Derrick or Mast.
4. Traveling Block
TRAVELING BLOCK WITH
UNIMATIC HOOK
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
23/130
3. Hoisting Component
Rotary Drilling Rig Components
An equipment that holds down the deadline part of the wire rope. It is
usually bolted on to the substructure.
5. Deadline Anchor
COMPRESSION
TENSION
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
24/130
3. Hoisting Component
Rotary Drilling Rig Components
5. Deadline Anchor
An equipment that holds down the deadline part of the wire rope. It is
usually bolted on to the substructure.
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
25/130
3. Hoisting Component
Rotary Drilling Rig Components
6. Supply Reel
A spool that stores the unused portion of the Drilling Line.
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
26/130
3. Hoisting Component
Rotary Drilling Rig Components
7. Drilling Line
The wire rope used to support the Drilling Tools.
Right Lang Lay
Left Lang Lay
Right Regular Lay
Left Regular Lay
Types of Wire Rope Lay
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
27/130
3. Hoisting Component
7. Drilling Line
The wire rope used to support the Drilling Tools.
Type of Wire Rope Construction
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
28/130
3. Hoisting Component
7. Drilling Line
Typically the wire rope used for Drilling Line would have the
following characteristics:
Rotary Drilling Rig Components
Shallow:
Deep:
1 to 1-1/8 diameter
1-1/4 to 2 diameter
Contruction: 6 x 19 S or 6 x 21 S or 6 x 25 FW, RRL, IPS or EIP, IWRC
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
29/130
3. Hoisting Component
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
30/130
4. Rotating Component
Rotary Drilling Rig Components
1. Derrick or Mast and Substructure
3. Hoisting Component
2. Power and Prime Movers
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
31/130
4. Rotating Component
Rotary Drilling Rig Components
The Rig Equipment responsible for rotating the Drillstring. Consist of
the following:
1. Swivel
2. Kelly Spinner
3. Kelly or Top Drive
4. Kelly Bushing
5. Master Bushing
6. Rotary Table
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
32/130
4. Rotating Component
Rotary Drilling Rig Components
The rotary tool that is hung from the hook of the traveling block to
suspend the drillstring and permit it to rotate freely.
1. Swivel
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
33/130
4. Rotating Component
Rotary Drilling Rig Components
It also provide connection for the rotary hose and provide
passageway for the flow of drilling fluid into the drillstem.
1. Swivel
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
34/130
4. Rotating Component
Rotary Drilling Rig Components
It also provide connection for the rotary hose and provide
passageway for the flow of drilling fluid into the drillstem.
1. Swivel
C
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
35/130
4. Rotating Component
Rotary Drilling Rig Components
A pneumatically controlled device mounted below the Swivel that
when actuated causes the Kelly to spin.
2. Kelly Spinner
R t D illi Ri C t
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
36/130
4. Rotating Component
Rotary Drilling Rig Components
A pneumatically controlled device mounted below the Swivel that
when actuated causes the Kelly to spin.
2. Kelly Spinner
R t D illi Ri C t
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
37/130
4. Rotating Component
Rotary Drilling Rig Components
The heavy steel member, usually four or six-sided that is suspended
from the Swivel through the Rotary Table and connected to the
topmost joint of drillpipe to turn the drill stem as the rotary table
turns.
3. Kelly
R t D illi Ri C t
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
38/130
4. Rotating Component
Rotary Drilling Rig Components
It has a bored passageway that permits fluid to be circulated into the
drill stem and up the annulus or vise versa.
3. Kelly
R t D illi Ri C t
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
39/130
4. Rotating Component
Rotary Drilling Rig Components
A hydraulically powered device located below the Swivel that when
actuated allows the Drillstem to spin and proceed in drilling.
3. Top Drive
R t D illi Ri C t
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
40/130
4. Rotating Component
Rotary Drilling Rig Components
A device that when fitted to master bushing transmits torque to the
kelly and simultaneously permits vertical movement of the Kelly to
make hole.
4. Kelly Bushing
Type HDP Type HDS Type MDS
Heavy Duty fits 23 through 49-1/2
Rotary Table
Heavy Duty for Square Drive Rotary
Tables
Medium Duty for Square Rotary
Table
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
41/130
4. Rotating Component
A device that fits into the rotary table to accommodate the slips and
drive the kelly bushing so that the rotating motion of the rotary table
can be transmitted to the Kelly.
5. Master Bushing
Type MSPC Type MSPC Type MBSSType MPCH
Fits 20-1/2 to 27-1/2
Rotary Tables
Fits 37-1/2 to 49-1/2
Rotary Tables
Fits 17-1/2 to 27-1/2
Rotary Tables
Fits 17-1/2 to 27-1/2
Rotary Tables
Rotary Drilling Rig Components
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
42/130
4. Rotating Component
Rotary Drilling Rig Components
Equipment used to turn the drill stem and support the drilling
assembly.
6. Rotary Table
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
43/130
4. Rotating Component
Rotary Drilling Rig Components
It has a beveled gear arrangement to create the rotational motion and
opening into which bushings are fitted to drive and support the
drilling assembly.
6. Rotary Table
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
44/130
4. Rotating Component
Rotary Drilling Rig Components
It has a beveled gear arrangement to create the rotational motion and
opening into which bushings are fitted to drive and support the
drilling assembly.
6. Rotary Table
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
45/130
4. Rotating Component
Rotary Drilling Rig Components
It has a beveled gear arrangement to create the rotational motion and
opening into which bushings are fitted to drive and support the
drilling assembly.
6. Rotary Table
3
75
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
46/130
4. Rotating Component
Rotary Drilling Rig Components
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
47/130
4. Rotating Component
Rotary Drilling Rig Components
1. Derrick or Mast and Substructure
3. Hoisting Component
2. Power and Prime Movers
5. Circulating Component
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
48/130
Rotary Drilling Rig Components
5. Circulating Component
The Rig Equipment responsible the movement of drilling fluid within
the well as well as solids removal incurred by the drilling fluid.
Normally the circulation would start from the mud pits, down the drill
stem, up the annulus and back to the mud pits.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
49/130
Rotary Drilling Rig Components
5. Circulating Component
Circulating component consist of the following:
1. Mud Pump
2. Pump Manifold
3. Standpipe
4. Swivel
5. Drillstring
6. Annulus
7. Return Line
8. Shale Shaker
9. Desander
10. Desilter
11. Degasser
12. Mud Pit
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
50/130
Rotary Drilling Rig Components
5. Circulating Component
1. Mud Pump
A large, high-pressure reciprocating pump used to circulated the
mud on a drilling rig.
A typical mud pump is a two cylinder, double acting or a three-cylinder, single acting piston pump whose pistons travel in
replaceable liners and are driven by a crankshaft actuated by an
engine or motor.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
51/130
Rotary Drilling Rig Components
5. Circulating Component
1. Mud Pump
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
52/130
Rotary Drilling Rig Components
5. Circulating Component
1. Mud Pump
1. SUCTION TANK
2. PREHYDRATION TANK
3. CHARGING PUMP
4. AGITATOR MOTORS
5. MUD HOPPPER
6. SUCTION LINE
7. CHARGING PUMP (MP)
8. MUD PUMP
9. VALVE AND PUMP PISTON
10. MUD PUMP DISCHARGE
MANIFOLD
11. PRESSURE GAUGE
12. PULSATION DAMPENER
13. PRESSURE RELIEF VALVE
14. DISCHARGE LINE
15. MUD PUMP ENGINE
16. INTERMEDIATE TANK
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
53/130
Rotary Drilling Rig Components
5. Circulating Component
2. Pump Manifold
An arrangement of piping and valves that receives drilling fluid from
one or more mud pumps and transmit the drilling fluid to the
succeeding circulating component.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
54/130
Rotary Drilling Rig Components
5. Circulating Component
2. Pump Manifold
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
55/130
Rotary Drilling Rig Components
5. Circulating Component
3. Standpipe
The vertical pipe rising along the side of the Derrick or Mast, which
joins mud pump manifold to the rotary hose.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
56/130
Rotary Drilling Rig Components
5. Circulating Component
7. Return Line
The passageway of the drilling fluid as it comes out of the well.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
57/130
5. Circulating Component
8. Shale Shaker
An equipment the uses a vibrating screen to remove cuttings from
the circulating fluid in rotary drilling operations.
1. RETURN LINE
2. POSSUM BELLY
4. SHAKER SCREEN
3. ELECTRIC MOTOR
y g g p
Rotary Drilling Rig Components
http://www.doublelifecorp.com/shakers.htm -
7/30/2019 Componentes de Torre de Perforacion Rotaria
58/130
5. Circulating Component
8. Shale Shaker
y g g p
Shale shakers are designed to handle 100-1600 gpm flowrate of mud
and be able to remove cutting to size of 77 microns using a 200 mesh
screen.
Rotary Drilling Rig Components
http://www.doublelifecorp.com/shakers.htm -
7/30/2019 Componentes de Torre de Perforacion Rotaria
59/130
5. Circulating Component
8. Shale Shaker
y g g p
Shale shakers are designed to handle 100-1600 gpm flowrate of mud
and be able to remove cutting to size of 77 microns using a 200 mesh
screen.
Rotary Drilling Rig Components
http://www.doublelifecorp.com/shakers.htm -
7/30/2019 Componentes de Torre de Perforacion Rotaria
60/130
5. Circulating Component
9. Desander
y g g p
A centrifugal device for removing sand from the drilling fluid to
prevent abrasion of the pumps.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
61/130
5. Circulating Component
10. Desilter
y g g p
Also a centrifugal device for removing free particles of silt from the
drilling fluid to keep the amount of solids in the fluid at the lowest
possible point.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
62/130
5. Circulating Component
11. Degasser
y g g p
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
63/130
5. Circulating Component
12. Mud Pit
A waste pit, usually an excavated earthen-walled pit.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
64/130
5. Circulating Component
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
65/130
5. Circulating Component
1. Derrick or Mast and Substructure
2. Power and Prime Movers
3. Hoisting Component
4. Rotating Component
6. Well Control Component
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
66/130
6. Well Control Component
The Rig Equipment responsible for preventing the build up of
unwanted formation fluids that lead to Blowout.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
67/130
6. Well Control Component
Well Control component consist of the following:
1. Annular Blowout Preventer
2. Ram Blowout Preventer
3. Diverter
4. Drilling Spools
5. Manifold, Valves and Sensors
6. Accumulator
7. Inside BOP
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
68/130
6. Well Control Component
1. Derrick or Mast and Substructure
2. Power and Prime Movers
3. Hoisting Component
4. Rotating Component
5. Circulating Component
7. Tubular and Tubular Handling Equipment
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
69/130
7. Tubular and Tubular Handling Equipment
Tubular are made of the following equipment:
1. Drill Pipe
2. Drill Collar
3. Heavy Weight Drill Pipe
4. Kelly
5. Subs
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
70/130
7. Tubular and Tubular Handling Equipment
1. Drillpipe
These are heavy seamless tubing used to rotate the bit and
circulated the drilling fluid. Joints of pipe approximately 30 feet long
are coupled together by means of tool joints.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
71/130
7. Tubular and Tubular Handling Equipment
1. Drillpipe
Basic Parts of a Drillpipe
SHOULDERSHOULDER
BOXPINNECK
NECK
TONG SPACE TONG SPACE
BODY
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
72/130
7. Tubular and Tubular Handling Equipment
1. Drillpipe
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
73/130
7. Tubular and Tubular Handling Equipment
1. Drillpipe
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
74/130
7. Tubular and Tubular Handling Equipment
1. Drillpipe
TENSILE REQUIREMENTS
RANGE LENGHTS
TOLERANCES
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
75/130
7. Tubular and Tubular Handling Equipment
1. Drillpipe
TOOLJOINTINTER
GCHANGEABILIT
Y
CHART
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
76/130
7. Tubular and Tubular Handling Equipment
1. Drillpipe
For other mechanical properties, please refer to available charts.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
77/130
7. Tubular and Tubular Handling Equipment
2. Drill Collar
The heavy, thick-walled tube steel, used between the drill pipe and
the bit in the drill stem to provide pendulum effect to the drill stem
and to provide weight on bit.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
78/130
7. Tubular and Tubular Handling Equipment
3. Heavy Weight Drillpipe
Similar in appearance to a drill pipe, HWDP has the following
different dimensional characteristics; the tube wall is heavier about
1thick in most sizes, the tool joints are longer, and the tube section
has a larger diameter at mid length to protect the pipe from wear.
HWDP were developed for the following reasons; As a transition
member to be run between drill collars and drill pipe, as a flexible
weight member to run on directional drilling, as a weight member on
small rigs, drilling small diameter holes.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
79/130
7. Tubular and Tubular Handling Equipment
3. Subs
A short, threaded piece of pipe used to adapt parts of the drilling
string that cannot otherwise be screwed together because of
difference in thread size or design. These consist of:
1. Bit Sub
2. Crossover Sub
3. Kelly Saver Sub
4. Lifting Sub
5. Bent Sub
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
80/130
7. Tubular and Tubular Handling Equipment
3. Subs
A short, threaded piece of pipe used to adapt parts of the drilling
string that cannot otherwise be screwed together because of
difference in thread size or design.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
81/130
7. Tubular and Tubular Handling Equipment
3. Subs
A short, threaded piece of pipe used to adapt parts of the drilling
string that cannot otherwise be screwed together because of
difference in thread size or design.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
82/130
7. Tubular and Tubular Handling Equipment
3. Subs
A short, threaded piece of pipe used to adapt parts of the drilling
string that cannot otherwise be screwed together because of
difference in thread size or design.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
83/130
7. Tubular and Tubular Handling Equipment
Tubular Handling Equipment
Equipment used to move, make and break connection, suspend
tubular on the rig. These include the following:
1. Elevator Links
2. Elevator
3. Lifting Subs
4. Lifting Plug
5. Tugger/Winch
6. Slips
7. Safety Clamp
8. Tongs
9. Kelly Spinner
10. Drillpipe Spinner
11. Iron Roughneck
12. Bit Breaker
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
84/130
7. Tubular and Tubular Handling Equipment
1. Elevator Links
Equipment attached onto the Traveling Block in order to suspend the
Elevators.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
85/130
7. Tubular and Tubular Handling Equipment
1. Elevator
Clamps that grip a stand of casing, tubing, drillpipe or drill collars so
that the stand or joint can be raised from or lowered into the hole
opening of the rotary table.
SIDE DOOR ELEVATOR CENTER LATCH ELEVATOR SINGLE JOINT ELEVATOR
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
86/130
7. Tubular and Tubular Handling Equipment
1. Elevator
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
87/130
7. Tubular and Tubular Handling Equipment
5. Tugger/Winch
A pneumatically operated drum with wire rope spooled onto it to
move or lift heavy objects on the rig floor.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
88/130
7. Tubular and Tubular Handling Equipment
6. Slips
A wedge shape piece of metal with teeth or other gripping elements
that are used to prevent pipe from slipping down into hole or to hold
the pipe in place.
Drill Pipe Slips
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
89/130
7. Tubular and Tubular Handling Equipment
6. Slips
A wedge shape piece of metal with teeth or other gripping elements
that are used to prevent pipe from slipping down into hole or to hold
the pipe in place.
Drill Collar Slips
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
90/130
7. Tubular and Tubular Handling Equipment
6. Slips
A wedge shape piece of metal with teeth or other gripping elements
that are used to prevent pipe from slipping down into hole or to hold
the pipe in place.
Casing Slips
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
91/130
7. Tubular and Tubular Handling Equipment
6. Slips
A wedge shape piece of metal with teeth or other gripping elements
that are used to prevent pipe from slipping down into hole or to hold
the pipe in place.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
92/130
7. Tubular and Tubular Handling Equipment
6. Safety Clamp
The are used on tubulars above the slips to prevent dropping the
string should the slips fail to hold.
Safety Clamp
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
93/130
7. Tubular and Tubular Handling Equipment
7. Safety Clamp
The are used on tubulars above the slips to prevent dropping the
string should the slips fail to hold.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
94/130
7. Tubular and Tubular Handling Equipment
8. Tong
Large wrenches used to make or break out tubulars.
Make up Tong Breakout Tong
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
95/130
7. Tubular and Tubular Handling Equipment
8. Tong
Large wrenches used to make or break out tubulars.
Making Connection
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
96/130
7. Tubular and Tubular Handling Equipment
8. Tong
Large wrenches used to make or break out tubulars.
Breaking Connection
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
97/130
7. Tubular and Tubular Handling Equipment
9. Kelly Spinner
A pneumatically operated device mounted on top of the kelly that
when actuated causes the kelly to spin.
KELLY SPINNER
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
98/130
7. Tubular and Tubular Handling Equipment
10. Drillpipe Spinner
A pneumatically operated device usually suspended on the rig floor
used to make fast connections and spin off of drill pipeS.
DRILLPIPE SPINNER
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
99/130
7. Tubular and Tubular Handling Equipment
11. Iron Roughneck
A pneumatically operated machine that replaces the functions
performed by the Kelly Spinner, Drillpipe Spinner and Tongs.
IRON ROUGHNECK
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
100/130
7. Tubular and Tubular Handling Equipment
12. Bit Breaker
A device that is placed on top of the rotary table to enable the bit to
be made up to drill string.
BIT BREAKER
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
101/130
7. Tubular and Tubular Handling Equipment
1. Derrick or Mast and Substructure
2. Power and Prime Movers
3. Hoisting Component
4. Rotating Component
5. Circulating Component
6. Well Control Component
8. Bit
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
102/130
8. Bit
A variety of bits are available for drilling and sampling operation. The
selection of bit is usually dependent on the formation which is to be
drilled and the purpose of the borehole.
Bit
Fixed Cutter Bits Roller Cone Bits
Drill Bit Core Bit
Material
Natural Diamond Insert
PDC Insert
TSP
No. of Cones 2 3 4 6
Material
Steel Mill
Tungsten Carbide Inserts
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
103/130
8. Bit
SHORT PDC BIT MEDIUM PDC BIT LONG PDC BIT NATURAL DIAMOND BIT TSP BIT
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
104/130
8. Bit
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
105/130
8. Bit
CORE BIT
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
106/130
8. Bit
MILL TOOTH
TRICONE BITTUNGSTEN CARBIDE INSERT
TRICONE BIT
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
107/130
7. Tubular and Tubular Handling Equipment
1. Derrick or Mast and Substructure
2. Power and Prime Movers
3. Hoisting Component
4. Rotating Component
5. Circulating Component
6. Well Control Component
8. Bit
9. Fishing Tools
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
108/130
9. Fishing Tools
The Rig Equipment used for the purpose of retrieving from the
wellbore sections of pipe, casing or other items which may have
become stuck or inadvertently dropped in the hole. These are the
following:
1. Overshot
2. Taper Tap
3. Grapple Spear
4. Junk Basket
5. Fishing Magnet
6. Wireline Spear
7. Junk Mill
8. Casing Scraper
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
109/130
9. Fishing Tools
1. Overshot
Overshot is an external catch fishing tool designed to retrieve
tubular items from the well bore.
SPIRAL GRAPPLE
OVERSHOT
BASKET GRAPPLE
OVERSHOT
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
110/130
9. Fishing Tools
2. Taper Tap
Is an internal catch fishing tool designed to retrieve tubular members
from the wellbore. The wicker thread are allowed to be embedded
into the interior of the fish.
Taper Tap
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
111/130
9. Fishing Tools
3. Grapple Spear
Is also an internal catch fishing tool designed to retrieve tubular
members from the wellbore.
The grapple spear is run in and positioned
inside the fish. Rotating the Grapple Spearone turn to the left will engaged the grapple
and caused tapers on the mandrel to expand
the grapple and bite into the fish.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
112/130
9. Fishing Tools
4. Junk Basket
Is a junk retrieval tool designed to remove all type of objects from
the bottom of the well. Such items as slip, hand tools, bit cones and
any other pieces of junk in the well.
This junk basket
utilises reverse
circulation combined
with coring operations
of up to 20 of core.
With direct circulation
the coring action on
the junk proceeds until
24 inch core is cut. The
finger on the upper
catcher break the core
when an upward strain
is applied.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
113/130
9. Fishing Tools
5. Fishing Magnet
Is a junk retrieval tool designed to effectively remove metal particles,
shavings and debris from the bottom of the wellbore.
The assembly is run in
the hole and hold 6 to
12 inches above the
fish. Circulate
generously to wash
away cuttings. Reduce
circulation, lower the
magnet to the fish and
rotate slightly to obtain
good contact. Cut off
circulation and pull outof hole.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
114/130
9. Fishing Tools
6. Wireline Spear
Is a junk retrieval tool designed to retrieve wireline and wire rope
from the wellbore.
The spear is made up
and run in hole , upon
reaching the wire to be
retrieved the spear is
lowered slowly
allowing the barbs to
engage the wire. The
spear is then lifted out
of the hole.
Rotary Drilling Rig Components
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
115/130
9. Fishing Tools
7. Junk Mill
Are designed to mill fish such as packers, squeeze tools, perforating
guns, drill pipe, tool joints, reamer, reamer blades and rock bits.
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
116/130
9. Fishing Tools
8. Casing Scraper
Is designed to remove scale, mud cake, cement sheath, embedded
bullets, and other foreign materials inside the casing wall.
CROWN BLOCK
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
117/130
MAST
CATLINE BOOM MONKEY BOARD
STAND PIPE
TUBING BOARD
CATWALK
PIPE RACK
DRILL PIPE
HYDRAULIC POWER UNIT
JUNK BIN
ACCUMULATOR
DRILLING LINE SPOOL
WAREHOUSE
CABLE TRAY
WATER TANK
MUD SACK
STORAGE
PUMPS AND HOPPER
MUD PUMP
MUD TANKS
FLARE LINE
DOG HOUSE
GENERATORS TYPICAL LAND RIG
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
118/130
TRAVELING BLOCK
TOP DRIVE
DRILLING LINE
DRAWWORKS
ROTARY HOSE
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
119/130
SHALE SHAKER
MUD CLEANER
DEGASSER
AGITATOR
MUD GUNTRIP TANK
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
120/130
DRILLERS CONSOLE
PIPE SETBACK AREA
ROTARY TABLE
RIG FLOOR
SUBSTRUCTURE
BLOWOUT PREVENTER
PIPE RAMP CHOKE MANIFOLD
CUTTINGS CONVEYOR
Line Organization of the Rig Crew
Area ManagerDrilling
S i t d t
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
121/130
Area Manager
Rig Manager
Toolpusher
Materials Man
Driller
Asst. Driller
Derrickman
Roughneck
Roustabout
Maintenance
Engineer
Rig Mechanic
Welder
Pipe Fitter
Crane Optr.
Rigger
Electrician
Motorman Pump Tender
Driver
Helper
Warehouseman
Safety & TrainingSpecialist
Superintendent
Job Description of Key Rig Personnel
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
122/130
Rig Manager
Responsible in administering and implementing the Operators and DrillingContractors guidelines and regulation.
Carries out daily onsite supervision to ensure that Rig Operation meet
Operators expectation and safety regulation.
Responsible in implementing extensive job and safety training.
Responsible in administering and implementing the Operators and Drilling
Contractors guidelines and regulation.
Ensure the integrity of all oilfield equipment, maintaining visual aspects of
oilfield site; promote cleanliness and enhancing the safety of the crew.
Job Description of Key Rig Personnel
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
123/130
Toolpusher
Responsible for the supervision of the Rig Operation and maintain drillingequipment to the highest standard of efficiency.
Interface and coordinate with the Drilling Superintendent, Area Manager,
Rig Manager, Service Man and other key personnel for Drilling Program
Implementation and Modification, Supplies, Crew Schedule and changes.
Performs inspection, periodical inventories and scheduling of material andequipment consumption and deliveries as well as backloading if applicable.
Job Description of Key Rig Personnel
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
124/130
Driller
Responsible for the manipulation and supervision of the Rig and all the inline equipment and sensors as well as proper top out (fill up) and control of
the bore hole to maintain the parameters required by the Operator.
To record important dimension and implementing safety programs on
various operational modes (Rig setting, skidding, drilling, tripping, fishing,
well completion, well flow and pressure testing etc.) in conformity with the
specification and regulation imposed by authorities.
To evaluate tour sheet, personnel and safety progress so as to recommend
contingent action at certain level of operation to meet the standard in all
occasion of the drilling program.
Responsible for the Rig-Up and Rig Down of the Drilling Contractor
equipment .
Job Description of Key Rig Personnel
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
125/130
Assistant Driller
Responsible for the preparation, strapping (measurement), inspection andproper storage of BOP, BHA and other drilling components and consumables
throughout the cycle of operation.
Responsible for the line up of valves on all manifolds or lines and for
random and periodical checkup as well as serving of all equipment and
assemblies in the system.
Prepare tour sheet and kill sheet, check and lead work force and held lecture
during safety meeting.
To secure all equipment from Mast, Rig Floor, Substructure to main and
cellar deck during Rig Mobilization.
Job Description of Key Rig Personnel
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
126/130
Derrickman
Responsible for the Monkey Board on trips and other Derrick itineraries.
Maintains Mud Pumps, Mud Control Devices, Flow line and its accessories.
Maintain Mud Volume and mud Properties and directed by the Mud engineer.
Prepare report on mixed mud and equipment Performance such as pumps,
agitators and sensors.
Assist roughneck at the floor, cellar deck and anywhere needed.
Housekeeping job on pump room, pit room etc.
Job Description of Key Rig Personnel
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
127/130
Roughneck
Responsible for the positioning of slips, tongs, spinner, elevator and other
rig equipment as directed by the Driller, Assistant Driller and other ranking
personnel.
To operated tuggers for lifting and lowering equipment and materials from
the pipe rack to the rig floor.
Assist serviceman to the Rig-Up and Rig-Down of their equipment.
Perform housekeeping jobs and servicing equipment.
To watch the shaker and other solid control equipment during circulation
and drilling.
Assist Derrickman in some derrick itineraries.
Rig Operation Terminologies
Breaking Down
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
128/130
Unscrewing the drill stem into single joints and placing them on the pipe rack. This
operation takes place at the completion of the well when the drill pipe will no longer
be used or when changing from one size of drill pipe to another.
Break out
To unscrew a section of the pipe to another.
Make a Connection
To attach a joint of drill pipe onto the drill stem suspended in the wellbore to permit
deepening the wellbore by the length of joint added usually 30 feet.
Make Hole
To deepen the hole made by the bit.
Nipple Up
To assemble the Blowout Preventer Stack on the well head at the surface.
Plug and Abandon
To place cement plugs into the dryhole and abandon it.
Rig Operation Terminologies
Racking Pipe
Th f l i h d f i i d l i h d i k f
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
129/130
The act of placing the stands of pipe in orderly arrangement in the derrick after
hoisting pipe from the wellbore.
Reverse Circulation
The course of drilling fluid downward through the annulus and upward through the
drillstem, in contrast to normal circulation.
Rig Up
To prepare the drilling rig for making hole, that is, to install tools and machinery
before drilling is started.
Run In
To go into the hole with tubing, drillpipe, and so forth
Slug the Pipe
Pumping into the top of the drill stem a quantity of heavy mud which will cause the
level of the fluid in the drill stem to fall as the drill stem is hoisted.
Spud In
To begin drilling a well, to start the hole.
Rig Operation Terminologies
Stab
T id th d f th i i t li t l j i t h ki
-
7/30/2019 Componentes de Torre de Perforacion Rotaria
130/130
To guide the end of the pipe into a coupling or tool joint when making up a
connection.
Tearing Down
The act of dismantling the rig at the completion of the well and preparing it moving
to the next location.