company private new ansi fall protection standards ansi z359.7 and ansi z359.14 joe brandel process...
TRANSCRIPT
Company Private
New ANSI Fall Protection Standards
ANSI Z359.7 and ANSI Z359.14Joe Brandel
Process Marketing Group
May 8, 2013
2Company Private
New ANSI Fall Protection Standards
ANSI Z359.14 Self Retracting Devices Effective August 20, 2012
SUMMARY •New terms
•SRD, SRL-R, SRL-LE
•New classifications•Class A, Class B
•New requirements•Visual Indicator required, new test weight - 282 lbs. for SRL performance test
•Leading edge classification and testing•Specific test criteria,
•Average arresting force •Measured during testing, labeled on product
•New inspection requirements •Factory authorized inspections, more frequent competent person inspections
3Company Private
New ANSI Fall Protection Standards
ANSI Z359.14 Details
New terms•SRD = Self Retracting Devices, includes SRL’s, SRL-R’s and SRL-LE’s•SRL= Self Retracting Lanyard (or Self Retracting Lifeline)•SRL-R= SRL with integral rescue capabilities
•Examples of models: Sealed Bloks with retrieval winch
•SRL-LE= SRL with leading edge capability•Examples of models: Ultra-Lok 3504500 and 3504600
Note- ANSI Z359.14 does not address SRL’s with RSQ feature,
tie-back SRL’s or twin type SRL’s
4Company Private
New ANSI Fall Protection Standards
ANSI Z359.14 Details
New classifications•SRD’s with dynamic performance as follows:
•Class A= maximum arrest distance of 24 inches. Average arresting force not to exceed 1350 lbs.
•Class B=maximum arrest distance of 54 inches. Average arresting force not to exceed 900 lbs.
•Example: Ultra-Lok web and cable models, Sealed Bloks, Talons,
•User instructions and markings on product will identify which class•Importance of classifications
•Help select appropriate SRD for the application. Clearance concerns and anchorage point strengths are important issues to address.
5Company Private
New ANSI Fall Protection Standards
ANSI Z359.14 Details
New requirements •Visual impact indicator
•Now required for all ANSI Z359.14 compliant SRD’s. Indicator shall be readily visible.
•ALL DBI-SALA and Protecta SRD’s have visual indicator
•New test weight •Test weight for dynamic performance test is now 282 lbs. The old test weight was 220 lbs.
•282 lb. test weight represents a 310 lbs. person
•282 lbs. represents a conversion ratio of human weight to test weight of 1.1:1
(220 lbs. represented a conversion of 1.4:1)
6Company Private
New ANSI Fall Protection Standards
ANSI Z359.14 Details
Leading edge classification and testing•Test set up
•Markings on products include minimum set back
distance and required clearance when falling over edge
•Compliant models: Leading edge Ultra-Lok models 3504500 and 3504600 (contain larger diameter cable and external energy absorber)• Drop test video
7Company Private
New ANSI Fall Protection Standards
Video 007
energy absorber
test weight
back up line
leading edge
SRL-LE
8Company Private
New ANSI Fall Protection Standards
Video 017
test weight
SRL-LE
back up line
leading edge
9Company Private
New ANSI Fall Protection Standards
ANSI Z359.14 Details
Average arresting force
•What is this? Average of every data point over 500 lbs. •Why is it important? Average arresting force more closely represents what the attached user and the anchorage point are subjected to. Compare this is maximum arresting force which includes one time spikes or peaks in the force measurement.•How do you know what average arresting force is for a particular product?
•Labeling on product
•User instruction manual
10Company Private
New ANSI Fall Protection Standards
Average arresting force- data points over 500 lbs.
500 lbs. threshold
Peak Force
Average Force
>500 lbs. time frame
11Company Private
New ANSI Fall Protection Standards
ANSI Z359.14 Details
New inspection requirements•Before use inspection – same as before •Competent person inspections
•Frequency based on type of use and conditions of use.
•Ranges from quarterly to annually.
•In the past, the competent person inspections were done annually
12Company Private
New ANSI Fall Protection Standards
ANSI Z359.14 Details
New inspection requirements •Factory authorized inspections
•An in depth internal inspection by a factory authorized inspection entity
•This is in addition to the competent person inspection
• Requires specialized training by the factory
•Frequency is based on type of use and conditions of use. Ranges from annually to every 5 years.
•In the past, CSG policy was to inspect device at least annually by competent person. If device passed inspection, no factory inspection/ recertification was required.
•To comply with ANSI Z359.14, SRD’s must have factory authorized inspection performed!
13Company Private
New ANSI Fall Protection Standards
14Company Private
New ANSI Fall Protection Standards
ANSI Z359.7 Qualification and Verification Testing Effective October 3, 2011
SUMMARY (one year to comply)
• Requirements of ANSI Z359.7 must be met before any product can be marked as “ANSI Compliant”. Plus applicable Z359 standard for that item•Test laboratory must be in compliance with ISO 17025•Complete standard must be complied with- not just selected sections•Three ways that fall protection products can be tested to meet requirements•Certification will be available on-line•Detailed proof of compliance to standards will be available upon request•Verification testing every 5 years if mfg. has registered Quality program
15Company Private
New ANSI Fall Protection Standards
ANSI Z359.7 Details
• Product must comply with Z359.7 and applicable Z359 product standard •Example = SRL’s must meet Z359.7 and Z359.14•Example= Harnesses must meet Z359.7 and Z359.1
•Note- Product must be marked with compliance to applicable ANSI product standard – ANSI Z359.14, or ANSI Z359.1 for example.
Note- CSG has determined that CSG product will also be marked with the following - “ISO 17025 accredited verification to ANSI Z359.7”
•Product must comply with complete standard•Cannot pick and choose which portions to comply with
•Must comply with everything- performance, design, markings, inspections, instructions, use, maintenance, etc.
•Product must comply with most current edition of the standard•Example= Cannot indicate compliance to ANSI Z359.1-1992 version if we made lanyard with non-3600 lb. gated hooks.
16Company Private
New ANSI Fall Protection Standards
ANSI Z359.7 Details
•Test lab must be in compliance with ISO 17025- General Requirements for the Competence of Testing and Calibration Laboratories
•Audited annually
•Accredited by outside agency
•The structure and all measuring equipment must be in compliance and calibrated annually
•Test stand must meet stiffness and frequency requirements•Test instruments must have correct level of sensitivity
17Company Private
New ANSI Fall Protection Standards
ANSI Z359.7 Details
•Qualification and verification testing must be done by one of the following
•Third Party organization with compliant lab
•At manufacturers accredited lab if witnessed by representative of accredited independent lab
•At manufacturers accredited lab and signed off and stamped by a professional engineer and qualified person.
18Company Private
New ANSI Fall Protection Standards
ANSI Z359.7 Details
•Certification from Capital Safety will be available on line. This will be signed and stamped•Example : See next slide
•Upon request, we will provide proof of compliance
19Company Private
New ANSI Fall Protection Standards
Certificate of Compliance
20Company Private
New ANSI Fall Protection Standards
THANK YOU
Questions or Comments?