Company and Product OverviewAn Introduction to BEA and Our Products

Company

• Founded February 1965

• Leading Manufacturer of Presence & Motion Detection Sensors For the Automatic Door Industry

• Worldwide Representation

• Parent Company• Halma Holdings• Market Capitalization $1.5B• Over 3,000 Employees

Global BEA

USA Europe China Japan BrazilPittsburgh, PA

Los Angeles, CA

Liege, Belgium Beijing

Hong Kong

Shangai

Tokyo Rio de Janeiro

BEA Product Segments

• Pedestrian– Products for High Energy Pedestrian Doors, including Sliding Doors,

Swinging Doors and Revolving Doors

• Low Energy– Products for Low Speed (low energy) automated handicap accessible

entrances

• Industrial– Products for automated Industrial Entrances (high speed and low speed

rolling doors, gates, automated freezer doors, loading docks and specialty factory access areas)

• Security– Entrance security solutions for Employee Entrances, Retail Secured Doors,

Industrial Secured Doors, Warehouse Entrances, Access Control Points and Interlocked Clean room entrances

BEA World Class Support

• Sales Support- Pre and Post Sales- US, Canada, and Mexico

• 24 / 7 Technical Support - BEA will support all your customers - 800 number on every product sold

• National Distribution- East and West coast stocking warehouse- 99% same day shipping

Security & Access Control ProductsAs of October 2011

Low Energy Products

• Works with low energy operators

• Push Plates for activation

• Hard wired and wireless

• REX buttons

• Adds safety to low energy doors

Low Energy Products

• Wide range of standard and specialty mounting options

• Wireless RF transmission

• Touchless activation for clean/sterile applications

• Single units or package options

Security Products

• Exit Sensors (PIR)

• Logic Modules

• Maglocks (indoor & outdoor applications)

•• Push Plates, REX Buttons and

Key Switch Products

• MS08U “Magic Switch” hands free wave to open

• Wireless Interconnects • RF 300/390/433 MHz available

Push Plates - Round

• 6” round

• Text only, text & logo, plain, logo only

• 4.5” round

• Text only, text & logo, plain, logo only

• Weather ring available

• Surface mount and flush mount boxes

Push Plates - Square

• 6” square

• Text only, text & logo, plain, logo only

• 4.75” square

• Text only, text & logo, plain, logo only

• 4.5” square

• Text only, text & logo, plain, logo only

Push Plates - Additional

• Single gang – 2.75” by 4.5”• Text & logo, logo only, plain• Vestibule push plate• Low profile pharmaceutical plate• Combo plate (push plate & key switch products)• PBS Brass series• Text & logo bright brass plated• Text & logo satin brass plated• Panther Plates – NEMA 4, (plate, box and 433MHz transmitter)• 4.75” round, 6” round, 4.75” square

Push Plates - JAMB

• PBJ Series 1.5” by 4.75”

• Text only, text & logo, plain, logo only

• PBJM Series 1.5” by 4.75”

• Text & logo, logo only

• PBJMS Series 1.75” by 4.5” (hardwired only)

• Text & logo, logo only

Push Plates – LPR36

Height: Overall 39”, Activation area: 36”Width: Overall 6”, Activation area 6”

Low Profile 1” Depth

Can be activated from any angle.

LPR36 – What is it?

• Knowing act device

• Low-profile, hi-low touch activation

• Provides easy access with one touch anywhere on the entire 36” x 6” stainless steel surface

– Capable of being activated from any angle by disabled persons

LPR36 – Why do we use it?

• Common applications– Schools– Universities– Hospitals– Rehabilitation Centers

• Any facility where accessibility needs are increased

• Exceeds California Building Code– Section 1117B.6

• Exceeds Ontario Building Code – Section A-3.8.3.3. (17)– Section A-3.8.1.5

Push Plate Packages• Push Plate 1: includes (1) plate, (1) mounting box, (1) transmitter, (1) receiver

• Push Plate 2: includes (2) plate, (2) mounting box, (2) transmitter, (1) receiver

• Push Plate 3: includes (1) JAMB plate, (1) mounting box, (1) transmitter, (1) receiver

• Push Plate 4: includes (2) JAMB plate, (2) mounting box, (2) transmitter, (1) receiver

• Panther 1: includes (1) any style panther push plate, (1) 433MHz receiver

• Panther 2: includes (2) any style panther push plate, (1) 433MHz receiver

• Vestibule Package: includes (1) vestibule plate with mounting box, (2) round or square plates, (2) mounting boxes, (4) 3V 433MHz transmitters, (2) 433MHZ receiver

Bollards

• Available in Black, Bronze and Silver

• 41 ½” H x 6 ¼” W x 4 ¼” D

• Powder-coated carbon steel (inside & out)

• Push plate options: 4 ½, 4 ¾ square, 4 ½ round & vestibule plate

• ABS plastic cap for wireless transmission

• 600 lb single and double

• 1200 lb single and double

• L&Z Brackets, filler bars, spacers & U-brackets (glass door installs)

• UL/CUL listed, 0-90 seconds hold open timer, LED for bond status, door position relay, lifetime warranty, 12/24V DC field selectable

• 1200 lb multi-use Maglock

• Nema 4 rated, weather resistant housing, 12/24V DC

• With conduit fitting for face mount, without conduit fitting for side mount

Magnetic Locks

Delayed Egress Maglock System

• UL listed Delayed Egress Kit – signage, sounder, lock, resettable keyswitch

• Built-in sensor detects when pressure is applied to the door

• 12/24V DC auto sensing

• Built-in Security Condition Sensor (SCS)

• 1200 lb holding force

• Field selectable to meet a large variety of building codes

• PIR – Passive Infrared (Fly Kit)

• 12/24V AC/DC, mounting angles 0 to 180 degrees

• Request to exit applications for manual and automatic doors

• Push to exit button

• Illuminated in Green or Blue

• 12/24V DC input voltage

• Single gang stainless steel

• Keyswitches products

• 3 styles: Single gang, Jamb & Combo Plate

• Momentary or maintained contact, stainless steel

Additional Products

Additional Products• Br3 – Programmable 3 relay logic module

– Key Security functions highlighted

• Used to sequence locking device release with auto operators.

• Used to sequence locking device release with auto operator and additional output for alarm connection.

• Security man trap functions.

• Wet and dry inputs/outputs

• 12/24V AC/DC

• Built in surge suppression

• Only module you’ll need on your truck

10 Simple Timer, 0 to 60 second time delay

11 Ratchet, Push to open-Push to close

21 Inhibitor with Door Position Input, Approach sensor

inhibit for Knowing Act

222 Relay Sequence Inhibitor with Door Position Input,

Approach sensor inhibit with Make and Break for

Knowing Act

25 2 Relay Sequence, Make and Break Delay Module for

locking devices

282 Relay Sequence with Door Position Input, MC25

function with the ability to reactivate door at any portion

of door cycle.

29 Relay 1 Deactivation Timer, MC25 Function with the

ability to delay locking device until fully closed position.

35 3 Relay Sequence, One-way vestibule sequence with

make and break for locking devices.

50 Interlock Timer with Door Position Inputs, Security Man

Trap– Sally Port

55 Interlock Ratchet with Door Position Inputs, Push to

Open- Push to Close Security Man Trap/Sally Port

65 2 Way, 2 Relay Sequence, 2-Way vestibule sequencer

Additional Products

• Keypads – indoor and outdoor versions

• 4 independent outputs, 4 independent timers

• Keypad programmable, 120 individual user codes

• 12/24V AC/DC

• MS08 - Touchless “Magic” Switch

• Microwave motion sensor used as a ‘contact free’ activation switch

• Doppler radar technology allows for use in sterile environments, clean rooms, hospitals, food processing plants, etc

• Pattern depth from 4 to 24 inches

• Available in single & double gang face plates

• White, Black and Cream

RF – Wireless Communication

• BEA offers three radio frequencies: 300 MHz, 390 MHz & 433 MHz

• 300MHz: Analog radio control, transmitters and receivers connected through dip switch settings. Over 1,000 unique codes. Hand held 1, 2 and 4 button options.

• 390 MHz: Digital radio control, transmitters and receiver is set up with a ‘learn code’ button. Hand held versions or prewired flag connectors plug directly to the BEA push plates. Up to 7 transmitters per receiver.

• 433MHz: Digital radio control operates with a unique rolling code for each activation. Multiple applications built into the receiver such as vestibule sequencing and ratchet relay with delay or no delay. Up to 100 transmitters per receiver.

Safety on Low Energy Doors

• Automatic door industry data reports over 150,000 low energy operators

shipped annually and are typically installed to meet the minimum

requirements of ANSI 156.19 – add an option for safety on every quote

– Your competition is !!

• BEA recommends installing, at minimum, a door-mounted Superscan on the approach side of the door which allows for reactivation during the closing cycle.

• Protects elderly, disabled or slower moving people from a closing door.

• Reduce damage when moving objects through door

• Save energy by reducing door hold open time

Safety & Shorter Hold Time

• Knowing Act Low Energy Door

– Safety is important!

• Hold open set to minimum of 5 sec.

– Sensor sees wheel chair and re-activates

– Regular traffic clears threshold within 5 sec.

– Without sensor, typically 14 sec. hold time required

Safety

HVAC Reduction / Energy Costs

CO2 Emissions Reduction

Superscan I

Safety on Low Energy Doors

• Superscan I

• Focused active infrared technology provides safety on a moving door; including swinging, bi-folding, revolving, and low energy doors.

• Unique design allows the Superscan to be mounted at the top of the door, eliminating damage from shopping carts and hospital beds.

• 12/24V AC/DC

• Perfect addition for added safety and energy savings.

• Superscan can be cut to fit any door width.

R. K. Security Distributors Support Contacts

BEA Technical Support

800-523-2462

Questions ??

• Call Joe or Mark for any pre & post sales questions.

• Call or send us an email for a BEA catalog and a current price list.

• jpsexton@beainc.com mrmasten@beainc.com

Thanks for using BEA solutions !!