All Prices are in US Dollars! Toll-Free: 10800-1527031 (China Telecom - ) — 10800-8527031 (CNCG - )digikey.com.cn — Telephone: (852) 3104 0500 — Fax: (852) 3104 06862180 (CN081)

K

Card Size Range Size Inch (cm) Guide Mnt. Mat- Digi-Key Price Each Vector Inch (cm) W x H Width x Depth Hgt.* Method erial Part No. 1 10 Part No. 3.00-5.00 x 4.5 19.00 x 9.00

3U Snap-In Nylon V1145-ND 170.08 149.52 CCK12S/90 (7.62-12.70 x 11.43) (48.26 x 22.86)

5.50-7.00 x 4.5 19.00 x 9.00 3U Snap-In Nylon V1052-ND 170.08 149.52 CCK13S/90

(13.97-17.78 x 11.43) (48.26 x 22.86)

5.50-7.00 x 4.5 19.00 x 9.00 3U Snap-In Nylon V1051-ND 188.92 166.08 CCA13S/90

(13.97-17.78 x 11.43) (48.26 x 22.86)

5.50-7.00 x 4.5 19.00 x 9.00 3U Riveted Zinc V1050-ND 353.72 310.96 CCA13M/90

(13.97-17.78 x 11.43) (48.26 x 22.86)

5.50-7.00 x 4.5 9.5 x 9.00 3U Snap-In Nylon V1146-ND 204.91 180.15 CCK13S-H/90

(13.97-17.78 x 11.43) (24.13 x 22.86)

8.60-10.1 x 4.5 19.00 x 12.00 3U Snap-In Nylon V1053-ND 220.82 194.13 CCA14S/90

(21.84-25.65 x 11.43) (48.26 x 30.48)

8.60-10.1 x 8 19.00 x 12.00 5U Snap-In Nylon V1148-ND 237.67 208.95 CCA17S/90

(21.84-25.65 x 20.32) (48.26 x 30.48)

4.0-8.50 x 10.0 19.00 x 9.00 7U Snap-In Nylon V1149-ND 191.34 168.21 CCK100S/90

(10.16-21.59 x 25.40) (48.26 x 22.86)

4.5 X 6.5 19.00 X 9.00 3U

Guide Alum. V2001-ND 204.02 179.36 CCA13C/90

(11.43 x 16.51) (48.26 x 22.86) Plate

Width x Length Plugboard Digi-Key Price Each Vector Description Inch (cm) Series Part No. 1 10 Part No. 8 Slot CCK13 Series Backplane

4.35 x 7.00 4610 V1096-ND 273.56 240.50 4610-8-1A

(11.05 x 17.78) 16 Slot CCK13 Series Backplane

4.35 x 13.00 4610 V1097-ND 366.00 321.76 4610-16-1A

(11.05 x 33.02)

V1052V1050, V1051, and V1053

Card Racks

Length Digi-Key Price Each Vector Description Inch (cm) Part No. 1 10 Part No. Grab Handle w/ Hardware for Card Racks

5.25” (13.34cm) and 8.75” (22.23cm) height . . . . . . — V1161-ND 13.81 12.15 HA12

Ejector Handle w/ Hardware for Cards (4 pcs./bag) . . — V1162-ND 11.03 9.70 HA9/4

T-Strut 1" wide for Customizing Card Rack . . . . . . . . . . . 16.85 (42.80) V2002-ND 10.16 8.93 TS169

T-Strut 1" wide for Customizing Card Rack . . . . . . . . . . . 20.85 (52.96) V2005-ND 11.25 9.89 TS209

Hardware Kit for Backplane Connector (42 pcs./total). . . — V2006-ND 13.52 11.89 HD34

Nut 4-40 Square Head for T-Strut (25 pcs./bag) . . . . . — V2007-ND 7.15 6.29 NT4-7PA

Flat Head Screw 4-40 THD for T-Struts (25 pcs./bag) . . . .25 (.64) V2004-ND 6.44 5.67 SC4-27/25

Bracket Kit for T-Struts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . — V2000-ND 11.28 9.92 BR16A

Plastic Screw Mount Card Guide (Pkg. of 12) . . . . . . . . 2.89 (7.34) V1151-ND 27.30 24.00 CG2-45P

Plastic Screw Mount Card Guide (Pkg. of 12) . . . . . . . . 5.42 (13.77) V1153-ND 25.63 22.53 CG2-65P

Plastic Screw Mount Card Guide (Pkg. of 12) . . . . . . . . 6.93 (17.60) V1156-ND 26.06 22.92 CG2-80P

Plastic Screw Mount Card Guide (Pkg. of 12) . . . . . . . . 8.14 (20.68) V1160-ND 26.48 23.28 CG2-95P

Nylon Snap-In Mount Card Guide (Pkg. of 12) . . . . . . . 3.17 (8.05) V1150-ND 16.56 14.56 CG2-45S

Nylon Snap-In Mount Card Guide (Pkg. of 12) . . . . . . . 5.42 (13.77) V1152-ND 14.60 12.84 CG2-65S

Nylon Snap-In Mount Card Guide (Pkg. of 12) . . . . . . . 6.93 (17.60) V1155-ND 21.46 18.87 CG2-80S

Nylon Snap-In Mount Card Guide (Pkg. of 12) . . . . . . . 8.43 (21.41) V1158-ND 18.60 16.36 CG2-95S

Metal Screw Mount Card Guide (Pkg. of 12) . . . . . . . . . 6.93 (17.60) V1157-ND 41.66 36.63 CG2-80M

EIA Backplanes

Card Rack Accessories

* 3U = 5.25” (13.34cm); 5U = 8.75U (22.23cm); 7U= 12.25” (31.12cm)

Accessories for card rack enclosures for customizing your application. Card guides are tapered slides for PCB cards to slide along. Snap-In versions provide easy installation without the need for tools. Screw mount versions (comes with hardware) allow card placement anywhere within .25” (6.35mm) spacing.

Designed in accordance with EIA standard, these 19” (48.26cm) subracks are compatible with Vector prototyping boards. All racks are adjustable in both height and depth and can be used with snap-in, plastic or metal card guides. Available in kit form (CCK) or fully assembled (CCA) all models feature brushed aluminum construction with a full line of prototyping boards, extenders and backplanes available. Card racks include nylon snap-in card guides.

For fast development of adapter card to PCI bus.P/N V1163-ND Features: • Multilayer board contains pad per hole patterns • Power and ground accessible throughout

the board • For use in 5 Volt or 3.3 Volt applications • For use with Vector prototype accessories.

PCI Development Boards

Guide Mount Mat- Digi-Key Price Each Vector Card Size Rack Size Hgt. Method erial Part No. 1 10 Part No.

Assembled Racks 3U x 160mm 19” x 9.27 3U Snap-In Nylon V1212-ND 204.28 179.59 CCA160-3U

6U x 160mm 19” x 9.27 6U Snap-In Nylon V1213-ND 239.44 210.50 CCA160-6U

3U x 220mm 19” x 11.63 3U Snap-In Nylon V1214-ND 219.26 192.76 CCA220-3U

6U x 220mm 19” x 11.63 6U Snap-In Nylon V1215-ND 239.02 210.13 CCA220-6U

Kitted Racks 3U x 160mm 19” x 9.27 3U Snap-In Nylon V1216-ND 196.91 173.11 CCK160-3U

3U x 160mm 19” x 11.63 6U Snap-In Nylon V1217-ND 213.21 187.44 CCK160-3U

3U x 220mm 19” x 11.63 3U Snap-In Nylon V1218-ND 200.36 176.15 CCK220-3U

6U x 220mm 19” x 11.63 6U Snap-In Nylon V1219-ND 218.35 191.96 CCK220-6U

Card Guide 160mm Nylon Snap-In Mount, (Pkg. of 12) . . . . . . . . . . . . . V1220-ND 22.46 19.75 CG1-160/12

Card Guide 220mm Nylon Snap-In Mount, (Pkg. of 12) . . . . . . . . . . . . . V1221-ND 26.85 23.60 CG1-220/12

VME Card RacksVector VME Subracks are designed for 19” systems based on

the DIN 41914 standard. Card Racks come in either completely

assembled (CCA) or kit form (CCK). Card Guides are ordered

separately. Vector backplanes are designed to meet VME bus Spec

Rev C1 and Rev D.

VME/DIN Backplanes

Digi-Key Price Each Vector Description Part No. 1 10 Part No.

5 Slot VME J1/J2, 6U Backplane with Power Bugs and Caps V1200-ND 748.26 657.81 VMEBP05P11

10 Slot VME J1/J2, 6U Backplane with Power Bugs and Caps V1202-ND 909.42 799.49 VMEBP10P11

12 Slot VME J1/J2, 6U Backplane with Power Bugs and Caps V1203-ND 1378.25 1211.65 VMEBP12P11

12 Slot VME J1/J2, 6U Backplane with Mate-N-Lok Power V1208-ND 978.49 860.21 VMEBP12M00

5 Slot VME J1/J2, 6U Backplane with Power Bugs & Mate-N-Lok V1210-ND 748.26 657.81 VMEBP05S00

Vector Monolithic Series back planes are designed to meet VMEbus

Specification Rev C1 and Rev D. All termination is placed inboard of the

two end connectors to allow the maximum number of slots (21) in a 19”

RETMA rack. Decoupling capacitors are provided at the ends. The resulting

improved power distrubution as well as signal shielding in ground layers

creates a high performance back plane with low signal cross talks. Press-

fit 96-pin DIN connectors are used. The “P” series which uses a 10-pin

power block or “bug” and #6-32 hardware or the “M” series which uses a

combination of power bugs and Mate-N-Lok connectors.

The newest specification for PCI-based computers is CompactPCI. It is elec tri-cally a superset of desktop PCI with a different physical form factor. CompactPCI utilizes the Eurocard form factor popularized by the VME bus. Card racks for CompactPCI Bus come completely assembled with card guides. Plug-in power supply and backplane are ordered separately. Standard 3U and 6U heights available with 4 or 8 slot card con figur ations.

Note: Vented top and bottoms are not included.

Features: • Backplane design is compliant with the CompactPCI spec ifi cation 1.0 • CPU slot is on the right • A Drive connector for Peripheral Power is provided • A 4-pin Connector is provided for 12VDC fan connection

CompactPCI® Card Racks

CompactPCI® Backplane

Dim. – Inch (cm) Digi-Key Price Each Vector Description Width Depth Hgt. Part No. 1 10 25 Part No. Card Rack cPCI 7.4 (18.80) 8.5 (21.59) 3U V1176-ND 158.87 — — CCA26-36

Card Rack cPCI 9.0 (22.86) 8.5 (21.59) 3U V1177-ND 239.80 — — CCA26-44-00

Card Rack cPCI 7.4 (18.80) 12 (30.48) 3U V1174-ND 161.14 — — CCA27-36-00

Card Rack cPCI 19 (48.26) 10 (25.40) 6U V1178-ND 227.94 200.39 177.85 CCA28-84-00

Optional Hardware Kit for Above Racks, 24 pcs. Total V2003-ND 10.28 9.04 8.03 HD91

Card Guides Snap-In Style for Above Racks V2008-ND 2.06 1.81 1.61 3250-0001-01

Digi-Key Price Vector Description Part No. Each Part No. Backplane for CompactPCI, 8 Slot, 6U V1184-ND 1494.78 CPCIBP8-6-64

.................. ...

..................

..................

..................

..................

Edgeboard Connectors

Edgeboard Connectors 96 Pin Din

Solder Eyelet Type Insulator Ma terial: Phenolic, UL-94V-0 or Glass filled diallyl; Phthalate UL-94V-1 or Ryton R10 Wrap Tail Type Insulator Material: Phenolic, UL-94V-0 or Glass filled diallyl; Phthalate UL-94V-1 or Polyester (VALOX) UL-94V-0 Contact Material: Phosphor bronze QQ-B-750 or Beryllium copper Contact Plat ing: .000010” gold over .000050” nickel Test Voltage: 650VAC Rated Current: 3 Amps Contact Res. Drop: 30 Mv Maximum @ rated current Insulation Resis tance: 5000MΩ, min. @ 500VDC

† Supplied with between-contact polarizing key. * Wrap Tail: 3-level, .025” (.64mm) Square†† Supplied with between-contact polarizing key and in-contact polarizing key.

Ctrs. No. Of Termination Mounting Digi-Key Price Each Vector In. (mm) Contacts Type Ears Part No. 1 10 25 Part No. .100 (2.54) 72 Wrap Tail Center V1061-ND†* 22.82 20.07 17.81 R636-1 .156 (3.96) 44 Solder Eye Flush V1062-ND†† 15.05 13.24 11.75 R644 .156 (3.96) 44 Wire Wrap Flush V1195-ND 13.38 11.76 10.44 R644-3F .156 (3.96) 44 Wire Wrap Center V1196-ND 13.38 11.76 10.44 R644-3C

Termination Male/ Digi-Key Price Each Vector Type Female Part No. 1 10 25 Part No.

Right Angle PC Mount Female V1233-ND 17.25 15.17 13.47 RE96FSR

Right Angle Wire Wrap Female V1250-ND 22.08 19.41 17.23 RE96FWR

Right Angle PC Mount Male V1235-ND 12.10 10.64 9.45 RE96MSR-062

Right Angle Long Lead PCB Male V1236-ND 12.99 11.43 10.14 RE96MSR-125

Right Angle Wire Wrap Male V1243-ND 23.88 21.00 18.64 RE96MWR

Straight Wire Wrap Female V1237-ND 13.80 12.13 10.77 RE96FW

Straight Wire Wrap Male V1238-ND 15.18 13.35 11.85 RE96MW

Straight PC Mount Female (AutoBus) V1239-ND 22.46 19.75 17.53 RE96FABG

Straight PC Mount Female V1234-ND 14.98 13.17 11.69 RE96FSD

Straight Press-Fit Female V1240-ND 9.19 8.08 7.18 RE96FSP

Straight Press-Fit Wire Wrap Female V1241-ND 14.94 13.14 11.66 RE96FWP

Wire-WrapSolder-Eye

For 1/16" (1.60mm) Thick P.C. Boards

• Connector Material: Glass filled polycarbonate • Temperature Rating: -55°C ~ 105°C

Digi-Key Price Each Vector Description Part No. 1 10 25 Part No. PCI Plugboard +5V or 3.3V, Pad Per Hole, PTH . . . . . . V1163-ND 261.83 230.18 204.29 4624-3

PCI Extender Test Card 5V for 32 or 64 Bit . . . . . . . . . . . V1166-ND 368.37 323.84 287.41 3690-34-5V

PCI Extender Test Card 3.3V for 32 or 64 Bit . . . . . . . . . V1167-ND 368.37 323.84 287.41 3690-34-3V

PCMCIA Adapter Board Assembly . . . . . . . . . . . . . . . . . . . . V1168-ND 112.82 99.19 88.03 4625-1

PCMCIA Proto Board Kit

4.5” x 6.00” (11.43cm x 15.24cm), Pad Per Hole . . . V1169-ND 197.98 174.05 154.47 4625-3

PCMCIA Extender Test Card for Type II or III Slots . . . . V1170-ND 155.61 136.80 121.41 3690-35

All Prices are in US Dollars! Toll-Free: 10800-1527031 (China Telecom - ) — 10800-8527031 (CNCG - )digikey.com.cn — Telephone: (852) 3104 0500 — Fax: (852) 3104 0686 (CN081) 2181

K

SMT Adapter Boards

Digi-Key Price Each Twin Industries Description Part No. 1 10 Part No.

PLCC 20, 28, 44, 64, 84 438-1031-ND 50.51 44.40 8100-SMT3

SOIC Medium, Wide, Plastic, (50 mil pitch) 438-1014-ND 21.84 19.20 8100-SMT4

SOIC Medium, Tiny, Metric, (25 mil/50mil pitch) 438-1017-ND 41.86 36.80 8100-SMT8

SOIC Medium, Tiny, Metric, (25 mil/50mil pitch) 438-1057-ND◆ 43.95 38.64 8100-SMT8-LF

QFP 44-100, 160, (25 mil pitch) 438-1015-ND 29.12 25.60 8100-SMT6

QFP 80 (20 mil pitch) 6” x 4” Board 438-1033-ND 40.04 35.20 8100-SMT11

QFP 100, 128, 144, 208, 240, (20 mil pitch) 438-1016-ND 41.86 36.80 8100-SMT7

TSOP 40, 48, 56, (20 mil pitch); PSOP 44

(50 mil pitch); SSOP 56 (30 mil pitch) 438-1018-ND 69.16 60.80 8100-SMT9

TSSOP (20 mil pitch) 6” x 4” Board 438-1032-ND 40.04 35.20 8100-SMT10

TSSOP (20 mil pitch) 6” x 4” Board 438-1058-ND◆ 42.04 36.96 8100-SMT10-LF

QFP 80 (20 mil pitch) 6” x 4” Board 438-1033-ND 40.04 35.20 8100-SMT11

TQFP 64 (20 mil pitch) 6” x 4” Board 438-1054-ND 40.04 35.20 8100-SMT14

Surface mount components are soldered to pads on boards. Traces extend from pads to prototyping holes on standard

0.1” x 0.1” (2.54mm x 2.54mm) grid. Individual leads can be monitored or other components can be added to evaluate

performance of surface mount product. Saves time and prototyping cost.

All boards made with FR4 laminate, and featuring ground plane on back side. Pad to pad spacing (pitch) is measured in

mils (thousandths of inch).

Digi-Key Price Each Twin Industries Fig. Description Part No. 1 10 Part No.

1 830 Tie-Points 438-1045-ND 8.73 7.99 TW-E40-1020

830 Tie-Points with 70 pcs. Wire Kit 438-1046-ND 13.44 12.29 TW-E41-1020

2 830 Tie-Points with 70 pcs. Wire Kit

and Binding Post 438-1047-ND 19.74 18.05 TW-E41-102B

3 2390 Tie-Points with 140 pcs. Wire kit

and Binding Post 438-1048-ND 37.45 34.24 TW-E41-1060

— 140 pcs. Wire Kit 438-1049-ND 9.98 7.99 TW-E012-000

Solderless BreadboardsBreadboards are commonly used for prototyping because they allow you to quickly build temporary circuits without

soldering. Twin Industries premium quality solderless breadboards have aluminum ground plates for high speed and low

noise, and a color coding Letter/ Number labeling scheme to assist in circuit layout and debugging. In addition, there are

binding posts for convenient attachment of power sources, or input and output signals.

• 70 piece kit contains: 5 of each; 5”, 4”, 3”, 2”, 1”, 0.9”, 0.8’, 0.7”, 0.6”, 0.5”, 0.4”, 0.3”, 0.2” and 0.1” wires.

• 140 piece kit contains: 10 of each; 5”, 4”, 3”, 2”, 1”, 0.9”, 0.8’, 0.7”, 0.6”, 0.5”, 0.4”, 0.3”, 0.2” and 0.1” wires.

Fig. 1

Fig. 2

Fig. 3

A B

15

1015

2025

3035

4045

5055

60

15

1015

2025

3035

4045

5055

60

C D E F G H I J

A B C D E F G H I J

- + - +

- + - +

-+

-+

A B

15

1015

2025

3035

4045

5055

60

15

1015

2025

3035

4045

5055

60

C D E F G H I J

A B C D E F G H I J

A B

15

1015

2025

3035

4045

5055

60

15

1015

2025

3035

4045

5055

60

C D E F G H I J

A B C D E F G H I J

- + - +

- + - +

6.89 (175)6.496 (165)

9.06(230)

6.89(175)

TW-E41-1060

AB

1 5 10 15 20 25 30 35 40 45 50 55 60

1 5 10 15 20 25 30 35 40 45 50 55 60

CDE

FGHIJ

ABCDE

FGHIJ

-+

-+

-+

-+

7.28 (185)6.496 (165)

3.94(100)

2.13(54)

AB

151015202530354045505560

151015202530354045505560

CD

EF

GH

IJ

AB

CD

EF

GH

IJ

-+

-+

-+

-+

6.496 (165)

2.13(54)

Dim. in Inches (mm)

Extender CardsBus extender cards allow units under test (UUT) to be developed in functioning systems. The extenders allow access to the UUT and prevent damage to test systems from repeated removals and insertions. Models with test point allow monitoring of signal activity.

◆ RoHS Compliant◆ RoHS Compliant

◆ RoHS Compliant

General Purpose PrototypingBoardsHigh quality prototyping boards for use in

hardware development, rapid prototyping, and

wire wrapping projects.

Features:• FR4 glass epoxy material, 0.062” thick

• Grid holes spaced on 0.1” x 0.1” (2.54mm x

2.54mm) centers

• Hole size .042” (.035 plated) • PTH = Plated

Thru Hole • NP = Non-Plated

Operating Temperature:Standard: 140°C

Lead Free: 170°C

Digi-Key Price Each Twin Industries Fig. Description Part No. 1 10 Part No.

1 CompactPCI 6U with Test Points

160mm x 6U 438-1056-ND◆ 492.00 475.60 2000-6U-EXTM-LF

—

CompactPCI 3U with Test Points

160mm x 3U 438-1055-ND◆ 273.00 263.90 2000-EXTM-LF

2 CompactPCI 6U x 80mm Rear I/O (J3-5) 438-1068-ND◆ NEW! 417.00 403.10 2000-6U-80EX-REAR-LF

— CompactPCI 3U x 80mm 438-1064-ND◆ 210.00 203.00 2000-3U-80EX-LF

— CompactPCI 6U x 80mm 438-1003-ND 450.00 435.00 2000-6U-80EX

PCI, 32 Bit, 4 Layer with Test Points

3 (3.3V or 5V) 438-1067-ND◆ 156.40 147.20 7586-5EXTM-LF

PCI, 64 Bit, 4 Layer with Test Points

(3.3V or 5V) 438-1066-ND◆ 132.60 124.80 7564-UEXTM-LF

PCI, 32 Bit, Right Angle Riser Card 438-1007-ND 51.00 48.00 7586-RAEXTM

4 PCI, 32 Bit, Right Angle Riser Card 438-1062-ND◆ 51.00 48.00 7586-RAEXTM-LF

PCI, 32 Bit, Left Angle Riser Card 438-1061-ND◆ 51.00 48.00 7586-LAEXTM-LF

5 PCMCIA, 4 Layer, 2.13” x 6.35”

(54mm x 161mm) 438-1065-ND◆ 105.40 99.20 3300-EXTM-LF

— ISA, 2 Layer 438-1013-ND 58.29 51.20 7098-EXT

6 VME with Test Points for all Signals 438-1063-ND◆ 183.60 172.80 8196-6U-EXT-LF

NP

Fig. 2

Fig. 4Fig. 3PTHwith Grid

PTH

Fig. 1

PTH

PTHwith Grid

PLCC

QFP100,128QFP44-100

SOIC

Digi-Key Price Each Twin Industries Description – Inch (mm) Part No. 1 10 Part No.

Fig. 1 - 7100 Series — Unclad (No Copper) — RoHS Compliant 4 x 5 (101.6 x 127) 438-1019-ND 4.73 4.16 7100-45 4.5 x 6.5 (114.3 x 165) 438-1037-ND 8.37 7.36 7100-4565 4.5 x 6.5 (114.3 x 165) .062” Holes 438-1034-ND 8.37 7.36 7100-062-4565 4.5 x 8.5 (114.3 x 216) .062” Holes 438-1035-ND 12.65 11.12 7100-062-4585 4 x 10 (101.6 x 254) 438-1036-ND 10.10 8.88 7100-410 10 x 10 (254 x 254) 438-1020-ND 23.66 20.80 7100-1010 10 x 20 (254 x 508) 438-1021-ND 45.50 40.00 7100-1020

Fig. 2 - 8000 Series — Plated Thru Hole, Double Sided 4 x 5 (101.6 x 127) 438-1022-ND 13.78 12.12 8000-45 4 x 5 (101.6 x 127) Gold Plating Over Copper 438-1051-ND◆ 14.47 12.72 8000-45-LF 4.5 x 6.5 (114.3 x 165) 438-1040-ND 21.84 19.20 8000-4565 4.5 x 6.5 (114.3 x 165) 438-1060-ND◆ 22.93 20.16 8000-4565-LF 6.3 x 3.9 (160 x 100) 2mm Pitch 438-1038-ND 25.21 22.16 8000-2MM-3U

4 x 10 (101.6 x 254) 438-1039-ND 26.39 23.20 8000-410

4 x 10 (101.6 x 254) Gold Plating Over Copper 438-1050-ND◆ 27.76 24.40 8000-410-LF 10 x 10 (254 x 254) 438-1023-ND 61.88 54.40 8000-1010 10 x 10 (254 x 254) 438-1059-ND◆ 64.97 57.12 8000-1010-LF 10 x 20 (254 x 508) 438-1024-ND 116.48 102.40 8000-1020

Fig. 3 - 8100 Series — Plated Thru Hole, GND Plane 4 x 5 (101.6 x 127) 438-1025-ND 13.78 12.12 8100-45 4 x 5 (101.6 x 127) Gold Plating Over Copper 438-1052-ND◆ 14.47 12.72 8100-45-LF 4.5 x 6.5 (114.3 x 165) 438-1042-ND 21.84 19.20 8100-4565 4 x 10 (101.6 x 254) 438-1041-ND 26.39 23.20 8100-410 10 x 10 (254 x 254) 438-1026-ND 61.88 54.40 8100-1010 10 x 20 (254 x 508) 438-1027-ND 116.48 102.40 8100-1020

Fig. 4 - 8200 Series — Plated Thru Hole, Two GND Plane 4 x 5 (101.6 x 127) 438-1028-ND 13.78 12.12 8200-45 4 x 5 (101.6 x 127) Gold Plating Over Copper 438-1053-ND◆ 14.47 12.72 8200-45-LF 4.5 x 6.5 (114.3 x 165) 438-1044-ND 21.84 19.20 8200-4565 4 x 10 (101.6 x 254) 438-1043-ND 26.39 23.20 8200-410 10 x 10 (254 x 254) 438-1029-ND 61.88 54.40 8200-1010 10 x 20 (254 x 508) 438-1030-ND 116.48 102.40 8200-1020

Fig. 5

Fig. 3

Fig. 4

Fig. 2Fig. 1

Fig. 6