compaction & concrete - mbw · 2019. 7. 1. · compaction & concrete construction equipment since...

WWW.MBW.COM 1

COMPACTION & CONCRETE CONSTRUCTION EQUIPMENT

WWW.MBW.COM

Since 1967, MBW has been manufacturing one of the construction industry’s highest quality, longest lasting line of compaction, concrete and utility equipment.

W H A T M A K E S T H E M B W L I N E I N T E R E S T I N G ?

MBW is not a copyist – we do not duplicate designs developed by others. MBW begins each new engineering project with the assumption that significant progress can be made in terms of improved productivity, reduced maintenance, longer life, enhanced user safety or lower long-term cost of ownership. Often, MBW’s R&D efforts result in entirely fresh approaches to solving industry problems. Many of our products have pushed the productivity envelope to new heights. Most MBW products solve long standing maintenance issues and extend product life expectations. Our goal is to provide equipment users with products of significant, tangible, comparative value... reasons to invest in MBW products.

DIRE

CTOR

YR A M M E R S 3 - 5 R422/R442 3

R482 4

Airammer 5

S I N G L E D I R E C T I O N V I B R A T O R Y P L A T E S 5 - 1 1 1000 Series 6-7

2000 Series 8-9

3000 Series 10

5000 Series 11

7000 Series 11

R E V E R S I B L E V I B R A T O R Y P L A T E S 1 2 - 1 3 Mechanical Reversible Plates 12

Hydraulic Reversible Plates 13

R O L L E R S 1 4 - 1 7 Skid Steer Vibratory Roller Attachments 14–15

Stick-Mounted Static & Vibratory Roller Attachments 16-17

B A R R E L M O U N T E D S P R A Y E R S 1 9

T R O W E L S 2 0 - 2 3 Walk-Behind Power Trowels 20-21

Ride-On Power Trowels 22-23

S C R E E D S 2 4 - 2 7 Blitzscreed® Vibratory Truss Screed 24

Power Winches 25

ScreeDemon™ Vibratory Wet Screed 26-27

M O R T A R M I X E R S 2 8 - 2 9

S L I P F O R M P A V E R S 3 0 - 3 1

C O N T A C T I N F O R M A T I O N B A C K

M B W C O N S T R U C T I O N D I V I S I O N

WWW.MBW.COM 3

* Clean sand, optimum moisture. MBW recommends that lifts not exceed 12” of granular soil, 9” of cohesive soil.Fuel capacity of 1.0 gal (3.8 L); Engine 3550 rpm( ) Metric Measurements. Specifications subject to change without notice.

R422 & R442 RAMMERS are ideally suited for the compaction of granular, mixed and cohesive soils in confined areas.

R442 delivers approximately 25% more compaction force than the R422

Patented UHMW polyethylene slide bearings provide minimal internal wear

11” ductile cast iron tamping shoe

Optional 4” and 6” trench shoe available for the R422

Available with a choice of two engines:

Honda GX100—which is also available with an oversized air filter

Honda GXR120—recommended for altitudes above 4000 ft.

US & International Patents

RAMM

ERS

MODEL R422 R442

Shoe Size 11 x 13 in(28 x 33 cm)

Engine Options & Operating Weight

Honda GX100 145 lbs (66 kg)Honda GX100

with Oversized Air Filter 149 lbs (68 kg)Honda GXR120 145 lbs (66 kg)


with Oversized Air Filter 154 lbs (70 kg)Honda GXR120 150 lbs (68 kg)

Percussion Rate Up to 720 blows/min

Compaction Area 3025 ft2/hr (281 m2/hr) 3025 ft2/hr (281 m2/hr)

Travel Speed Up to 55 ft/min (16 m/min)

Compaction Depth* Up to 18 in (45 cm)

R 4 2 2 / R 4 4 2

AIR FILTER OPTION

OPTIONAL SHOE

COMPACTION

V I B R A T O R Y R A M M E R SS I N G L E D I R E C T I O N V I B R A T O R Y P L A T E S

R E V E R S I B L E V I B R A T O R Y P L A T E S

S K I D S T E E R R O L L E R A T T A C H M E N T SS T I C K M O U N T E D S T A T I C &

V I B R A T O R Y W H E E L A T T A C H M E N T S

2 WWW.MBW.COM

R422

WWW.MBW.COM 54 WWW.MBW.COM

* Clean sand, optimum moisture. MBW recommends that lifts not exceed 12” of granular soil, 9” of cohesive soil.Fuel capacity of 1.0 gal (3.8 L); Engine 3550 rpm( ) Metric Measurements. Specifications subject to change without notice.

* Clean sand, optimum moisture. MBW recommends that lifts not exceed 12” of granular soil, 9” of cohesive soil.( ) Metric Measurements. Specifications subject to change without notice.

RAM

MER

S RAMM

ERS

R482 RAMMERS are equipped with integral tachometers and hour meters that indicate when maximum operational performance is being reached and when maintenance intervals are needed. The result is higher productivity and increased service life.

Available with a choice of two engines.

Honda GX100

Honda GXR120—recommended for altitudes above 4000 ft.

MODEL R482 - 11” SHOE R482 - 13” SHOEShoe Size 11 x 13 in (28 x 33 cm) 13 x 15 in (33 x 38 cm)

Engine Options

Honda GX100 158 lbs (72 kg)Honda GXR120 158 lbs (72 kg)

Honda GX100 165 lbs (75 kg)Honda GXR120 165 lbs (75 kg)

Percussion Rate Up to 650 blows/min

Compaction Area 3300 ft2/hr (307 m2/hr) 3900 ft2/hr(362 m2/hr)

Travel Speed Up to 60 ft/min (18.3 m/min)


R 4 8 2 A R 5 6 / 5 7 A I R A M M E R

TACHOMETER 4” & 6” NARROW SHOE WITH 12” EXTENSION

The Airammer© is a pneumatically powered rammer which eliminates a long list of engine related problems:

No spark plug or rewind starter

No flooding or rpm issues

The Airammer also offers the following advantages:

No need to handle flammable gas or oil

No exhaust fumes, safe for indoor use

Transport or store in any position

No frustration of trying to start an engine or stopping to refuel

Less maintenance equals lower costs

MODEL AR56 AR57Shoe Size Iron 11 x 13 in (28 x 33 cm) Alum 13 x 15 in (33 x 38 cm)

Operating Weight 124 lbs (56 kg) 126 lbs (57 kg)

Percussion Rate 650 blows/min 650 blows/min

Compaction Area 3300 ft2/hr (307 m2/hr) 3900 ft2/hr(362 m2/hr)

Travel Speed Up to 60 ft/min (18.3 m/min) Up to 60 ft/min (18.3 m/min)

Compaction Depth* Up to 24 in (61 cm) Up to 24 in (61 cm)

Air Required 75 cfm 110 psi 75 cfm 110 psi

RPM 4500 4500

AR56

1 0 0 0 S E R I E S / 1 3 0 T O 1 8 5 L B R A N G E


* Clean sand, optimum moisture. MBW recommends that lifts not exceed 12”.( ) Metric Measurements. Specifications subject to change without notice.

SING

LE D

IREC

TION

VIBR

ATOR

Y PLA

TES SINGLE DIRECTION VIBRATORY PLATES


MODEL GP12 GP15 GP18

Plate Size WxL 13 x 22.5 in(33 x 57 cm)16 x 22.5 in(40 x 57 cm)

18 x 22.5 in(46 x 57 cm)

Operating Weight 130 lbs (59 kg) 139 lbs (63 kg) 161 lbs (73 kg)

Engine Honda GX120

Amplitude .058 in (1.47 mm) .054 in (1.37 mm) .067 in (1.72 mm)

Centrifugal Force 1920 lbs (8.5 kN) 2000 lbs (8.9 kN) 2780 lbs (12.3 kN)

Exciter Speed 5240 vpm 5350 vpm 5240 vpm


Travel Speed up to 83 ft/min(25 m/min)up to 68 ft/min

(21 m/min)up to 75 ft/min

(23 m/min)

Compaction Area 5395 ft2/hr

(501 m2/hr)5440 ft2/hr(505 m2/hr)

6750 ft2/hr(627 m2/hr)

MODEL AP12 AP15 AP18

Plate Size WxL 13 x 22.5 in(33 x 57 cm)16 x 22.5 in(40 x 57 cm)

18 x 22.5 in(46 x 57 cm)

Operating Weight

No Water134 lbs (61 kg)

Full Water152 lbs (69 kg)


Full sWater161 lbs (73 kg)


Full Water183 lbs (83 kg)

Engine Honda GX120


Centrifugal Force 1920 lbs (8.5 kN) 2000 lbs (8.9 kN) 2780 lbs (12.3 kN)

Exciter Speed 5240 vpm 5350 vpm 5240 vpm




(23 m/min)

Compaction Area

5395 ft2/hr(501 m2/hr)

5440 ft2/hr(505 m2/hr)

6750 ft2/hr(627 m2/hr)

Water Tank Capacity

2.3 gal(8.7 l)

2.3 gal(8.7 l)

2.3 gal(8.7 l)

1 0 0 0 S E R I E S / 1 3 0 T O 1 8 5 L B R A N G E

OPTIONAL WHEEL KIT

OPTIONAL UHMW PAD

This series of economical vibratory plates, the 12, 15 & 18, are portable, and offer outstanding compaction performance.

Available with or without a water tank

Patented suspension system

Reduced hand/arm vibration

Ideal for confined areas

Easy to lift and maneuver One piece exciter with self cleaning open base plate design

Optional UHMW paving pad accessory for placing interlocking paving stone/brick/block

Optional wheel kit

Patented

GP18

AP15



SING

LE D

IREC

TION

VIBR

ATOR

Y PLA


The GP2000 is a permutation of the AP2000 designed to provide optimal productivity in compaction of sands and gravel.

Standard with the Honda GX160 engine

Optional UHMW paving pad accessory for placing interlocking paving stone/brick/block

Optional wheel kit

MBW’s AP2000 was the first vibratory plate compactor specifically designed for asphalt applications.

Stress relieved steel plates are crack resistant and provide long wear. Aluminum exciter housing dissipates heat rapidly and custom lubricants preserve bearing and seal integrity.

Standard with the Honda GX160 engine

Optional UHMW paving pad accessory for interlocking paving blocks

Optional wheel kit


MODEL AP2000 AP2018

Plate Size WxL 20 x 22 in(51 x 56)20 x 22 in(51 x 56)

Operating Weight

No Water 168 lbs (76 kg)

Full Water 193 lbs (88 kg)



Engine Options Honda GX160

Amplitude (No Water) .082 in (2.08 mm)

Centrifugal Force 2475 lbs (11 kN)

Exciter Speed 4400 vpm


Travel Speed up to 90 ft/min(27 m/min)

Compaction Area 9000 ft2/hr (836 m2/hr)

Water Tank Capacity 3 gal (11.3 l) 1 gal (4.0 l)

MODEL GP2000

Plate Size WxL 20 x 22 in(51 x 56 cm)

Operating Weight 165 lbs (75 kg)

Engine Options Honda GX160

Amplitude .083 in (2.11 mm)

Centrifugal Force 3250 lbs (14.5 kN)



Travel Speed up to 120 ft/min(37 m/min)


(1115 m2/hr)

2 0 0 0 S E R I E S / 1 6 5 T O 1 9 3 L B R A N G E 2 0 0 0 S E R I E S / 1 6 5 T O 1 9 3 L B R A N G E

OPTIONAL UHMW PADAP2018

7 0 0 0 S E R I E S / 6 5 3 L B S



GP3550 and AP3550 are premium, high production compactors that will run for decades.

Available with or without a water tank

Full roll cage protection

Reduced hand/arm vibration

Enhanced amplitude and faster travel speeds

GP3000-15 is not a lightweight compactor. Yet it is ideal for confined work areas, such as sidewalk, curb and gutter as well as narrow trenches.


The ergonomically designed GP5800 is in a class by itself. With outstanding performance, ease of service and long life expectancy, the GP5800 is number 1 in its class.

Standard protective cage

Reducted hand/arm vibration

Superior suspension

SING

LE D

IREC

TION

VIBR

ATOR

Y PLA


MODEL GP5800 GP7000

Plate Size WxL 23 x 24 in(58 x 61 cm)26 x 30 in

(66 x 76 cm)

Weight 288 lbs (131 kg) 653 lbs (296 kg)

Engine Honda GX270 Honda GX390

Amplitude .094 in (2.39 mm) .166 in (4.22 mm)

Centrifugal Force 5800 lbs (25.8 kN) 7900 lbs (35.1 kN)

Exciter Speed 4800 vpm 2800 vpm

Compaction Depth* Up to 20 in (51 cm) Up to 30 in (76 cm)

Travel Speed up to 130 ft/min(39.6 m/min)up to 100 ft/min

(30.5 m/min)


(1389 m2/hr)13000 ft2/hr(1208 m2/hr)

3 0 0 0 S E R I E S / 2 0 2 T O 2 5 4 L B R A N G E 5 0 0 0 S E R I E S / 2 8 8 L B S

MODEL AP3550 GP3550 GP3000-15

Plate Size WxL 21 x 22 in (53 x 56 cm) 16 x 20 in(41 x 51 cm)

Weight



226 lbs(103 kg)

202 lbs(92 kg)

Engine Honda GX160




Compaction Depth* Up to 21 in (53 cm) Up to 21 in (53 cm) Up to 16 in (41 cm)



(33.5 m/min)


(1073 m2/hr)11550 ft2/hr(1073 m2/hr)

8800 ft2/hr(818 m2/hr)

GP7000 is MBW’s heavy hitter for jobs with difficult soils and deep lifts. With low frequency and high amplitude, this machine outperforms walk-behind rollers on most granular applications.

GP3550

GP3000-15


GPR 65, 68 and 77 are compact reversible plates ideal for narrow trenches and confined areas.

Head-to-head competitive demonstration quickly establishes the comparative benefits of an MBW small reversible plate.

Lower acquistion cost

Low maintenance

Reliable heavy duty mechanical shifting design

Directional changes at full speeds


REVE

RSIB

LE V

IBRA

TORY

PLA

TES REVERSIBLE VIBRATORY PLATES

MODEL GPR65 GPR68 GPR77

Plate Size WxL 15 x 26 in (38 x 66 cm)18 x 26 in

(46 x 66 cm)22 x 26 in

(56 x 66 cm)

Engine Options & Operating Weight

Honda GX160 325 lbs (147 kg)




Centrifugal Force 6000 lbs (27 kN) 7775 lbs (35 kN)

Exciter Speed 4400 vpm 4725 vpm


Travel Speed up to 92 ft/min (28 m/min)up to 88 ft/min


(26 m/min)


(641 m2/hr)7920 ft2/hr (736 m2/hr)

9460 ft2/hr (879 m2/hr)

S M A L L R E V E R S I B L E / 3 2 5 T O 3 9 7 L B S H Y D R A U L I C S H I F T I N G / 8 9 3 T O 9 1 5 L B S

MBW's hydraulic shifting reversible plates solve maintenance problems that have long plagued this product type.

Patented exciter assembly

Exciter system vented to prevent damage to shifting seals

Simplified maintenance and reduced service time

Increased weight, amplitude and travel speed

Protected by a full wrap around roll cage

Lifting bails for ease in handling

Lower hand arm vibration along with simple, convenient, safe controls at operator’s position

Infinitely variable travel speed in forward and reverse directions plus spot compaction

Only reversible plate line Made in the USA

MODEL GPR15-24 GPR15-26

Plate Size WxL 24 x 33 in(61 x 84 cm)26 x 33 in

(66 x 84 cm)


Engine Honda GX390

Fuel Gas





(26 m/min)


(1003 m2/hr)11310 ft2/hr(1051 m2/hr)

Amplitude Range** .073 - .104 in(1.85 - 2.64 mm).071 - .101 in

(1.80 - 2.57 mm)

* Clean sand, optimum moisture. MBW recommends that lifts not exceed 12”.** Amplitude based on actual vibratory mass.( ) Metric Measurements. Specifications subject to change without notice.


ROLL

ER A

TTAC

HMEN

TSW

HEEL ATTACHMENTS

( ) Metric Measurements. Specifications subject to change without notice.

MBW’s skid steer vibratory roller attachments are one of the most well designed and innovative machines on the market. ATS (smooth drum) and ATP (padded drum) models are available in 73 and 84 inch working widths.

All models feature:

Hydraullically powered exciter systems lubricated by an oil mist design

Patented eccentric shaft design

Knockdown blade

Universal quick attach system

Industry’s lowest incidence of bearing and seal failures

MBW compaction attachments for skid-steer loaders offer contractors and rental yards a cost effective, low maintenance alternative to comparatively high cost self-contained rollers.US Patents

MODEL ATS/ATP73 ATS/ATP84Length 43.3 in (110 cm)

Height/Weight

Smooth 29 in (74 cm) 1940 lbs (880 kg)

Padded 30 in (76 cm) 2080 lbs (943 kg)

Smooth 29 in (74 cm) 2260 lbs (1025 kg)

Padded 30 in (76 cm) 2410 lbs (1093 kg)

Working Width 73 in (185 cm) 84 in (213 cm)

Amplitude .05 in (1.3 mm)

Exciter Speed 3000 rpm

Centrifugal Force 8850 lbs (39.4 kN) 9765 lbs (43.4 kN)

Flow Requirement 10-50 gpm (38-189 Lpm)

Pressure Requirement 1500-3000 psi (103-207 bar)

Hydraulic Connection 1/2” Flat Face Quick Coupling

S K I D S T E E R R O L L E R A T T A C H M E N T S MVW11 STICK-MOUNTED WHEEL ATTACHMENT

** Centrifugal force data for vibratory plates is not an expression of compaction effectiveness or force. See “Beware of Compaction” Specifications.( ) Metric Measurements. Specifications subject to change without notice.

The MVW11 is the first vibratory wheel made specifically for a mini-excavator. This 11” wheel is designed for a mini-excavator in the 7K to 14K range.

MBW’s MVW11 has two important advantages for contractors:

Versatility

Increased productivity

MODEL MVW11Weight 660 lbs (300 kg)

Working Width 11” (28 cm)

Height 36” (91 cm)

Length 32” (81 cm)

Exciter Speed 3000 rpm

Centrifugal Force** 2780 lbf (12.4 kN)

Flow Requirement 10-50 gpm (38-189 Lpm)

Pressure Requirement 1500 psi (103 bar)

ATS84

ATP73

WWW.MBW.COM 1716 WWW.MBW.COM( ) Metric Measurements. Specifications subject to change without notice.

WHEEL ATTACHM

ENTS

This highly versatile range of stick-mounted compaction wheels are up to 10 times more productive than walk-behind rollers and stick-mounted vibratory plates. With working widths of either 24” or 36” these vibratory wheels are made for excavators in the 20K to 60K range.

Standard leveling blade

Pin mount adapter

Static

Vibratory

MODEL STATIC VIBRATORY

Working WidthW24 24 in (61 cm)W36 36 in (91 cm)

Operating Weight

W24 1367 lbs (620 kg)W36 1750 lbs (793 kg)

W24 2386 lbs (1082 kg)W36 2829 lbs (1283 kg)

Amplitude N/A Variable withStatic Pressure

Centrifugal Force N/A

10,000 lbs(44.5 kN)

Exciter Speed N/A 3000 vpm

Flow Requirement N/A

10-70 gpm(38-265 Lpm)

Pressure Requirement N/A

1500-3000 psi(103-207 bar)

STATIC COMPACTION WHEELS UVW STICK-MOUNTED WHEEL ATTACHMENT

V I B R A T O R Y C O M P A C T I O N W H E E L S

MBW STATIC COMPACTION WHEELS are built to standards suitable for vibratory compactors. That means

Heavier bearings and shafts

Heavier frame to support the wheel at both ends

Easily converted into vibratory wheels

MBW pioneered the industry’s first stick-mounted vibratory compaction wheel in the late 1990s. MBW now has a whole new generation of vibratory compaction wheels featuring:

Redesigned frame to support wheel on both ends

Patented suspension system

Lower exciter operating temperatures

WHE

EL A

TTAC

HMEN

TS

WWW.MBW.COM 19

BARREL MOUNTED SPRAYERS

The BMS74 and BMS95 mix and spray water based curing and sealing compounds and form release agents for concrete applications.

Both sprayers are housed in an extra wide, heavy duty protective cage. The sprayers are easily locked to a 55 gallon drum or can be used in conjunction with the optional Easy Load Cart. The cart rolls on pneumatic tires and rubber castors for use on green concrete without damaging the slab.

Hose, Gun, Wand & Cart sold separately.

Options

Pressure Gauge (standard on BMS95 only)

Hydraulic Universal Hose with QD fittings available in 25’, 50’ or 100’

Spray Nozzle Kit (2 each of fine, medium and heavy tips)

9’ Spray Wand

Standard or HD Spray Gun

Easy Load Cart


MODEL BMS74 BMS95Pump Roller Diaphragm

Solids Content 25% 35%

Max Flow 7.5 gpm (28.3 lpm) 9.5 gpm (36 lpm)

Max Pressure 300 psi (20.7 bar) 550 psi (38 bar)

Adjustable Pressure Settings Yes

Std. Operating Pressure 100 psi (6.8 bar)

Weight 95 lb (43 kg) 115 lb (52 kg)

Size 27 x 16 x 17 in (69 x 41 x 43 cm)

Engine Honda GX120 Honda GX160

Quick Disconnect Yes

B A R R E L M O U N T E D S P R A Y E R SC O N C R E T E

B A R R E L M O U N T E D S P R A Y E R SW A L K - B E H I N D P O W E R T R O W E L S

R I D E - O N P O W E R T R O W E L S

B L I T Z S C R E E D ® V I B R A T O R Y T R U S S S C R E E DM O R T A R M I X E R S

S C R E E D E M O N ™ V I B R A T O R Y W E T S C R E E DS L I P F O R M P A V E R S

18 WWW.MBW.COM

Shown with optional cart


WALK-BEHIND TROW

ELSW A L K - B E H I N D P O W E R T R O W E L S

WAL

K-BE

HIND

TRO

WEL

S

MODEL F24

Engine OptionsHonda GX120 (114 lbs/64 kg)

3 HP Motor Single Phase 220V (126 lbs/57 kg)

Ring Diameter 24 in (61 cm)

Trowel Speed 70-125 rpm

W A L K - B E H I N D P O W E R T R O W E L S

MODEL F36 F46

Engine Options Operating Weight

Honda GX160 183 lbs (83 kg)Honda GX270 209 lbs (95 kg)

Honda GX270 High Speed 216 lbs (98 kg)


260 lbs (118 kg)Honda GX390 High Speed

267 lbs (121 kg)

Ring Diameter 37.5 in (95 cm) 47.6 in (121 cm)

Blade Sweep Dia. 35.5 in (90 cm) 46 in (117 cm)

Trowel Speed 70-135 rpm35-180 rpm High Speed70-135 rpm

35-180 rpm High Speed

Low Vibration Handle Height 35.8” Min - 43.3” Max (91-110 cm)

Noise Level 85-105 dBA

( ) Metric Measurements. Specifications subject to change without notice. ( ) Metric Measurements. Specifications subject to change without notice.

LOW VIBRATION HANDLE ROTATING GUARD RING

FOLD DOWN HANDLE

MBW WALK-BEHIND POWER TROWELS feature the industry’s heaviest bearings, output shafts, gears, spiders and blade arms. Comparison of these critical MBW components to those of any competitor answers the question as to why MBW trowels run so well for so long.

Patented Low Vibration handle is multi axis shock mounted to reduce operator fatigue

Tool free height adjustable operator handle

ISO compliant, low profile guard ring allows for easy cleaning and blade changes

Optional EZ Pitch handle

Patented

The F24 EDGER TROWEL is ideal for jobs that require a lightweight, highly maneuverable, professional finishing tool. This specialty finishing power trowel allows professional results even when confined areas or weight restrictions leave other machines standing idle. Perfect for edging in the tightest spaces, the F24 Walk Behind Power Trowel is always ready when needed.

EZ PITCH HANDLE

WWW.MBW.COM 23

With 3 sizes and 5 distinctly different models, MBW LOWRIDERS cover the full range of floating and finishing applications. LOWRIDERS set industry standards for ride-on trowels with high performance, low maintenance and long life.

Low center of gravity

Protected drive train

Easy to service

Superior lines of sight

Easily accessible lift points or lift handles.

M K 8 - 7 5 is the industry’s smallest ride-on trowel. A manual steer, 11.7 hp, 5 foot machine.

M K 8 - 9 0 is a manual steer, 23.5 hp, 6 foot machine.

M K 8 - 9 1 is the industry’s only hydraulic steer, 23.5 hp, 6 foot machine.

M K 8 - 1 2 0 is a manual steer, 31 hp, 8 foot machine.

M K 8 - 1 2 1 is a hydraulic steer, 35 hp, 8 foot machine.

22 WWW.MBW.COM( ) Metric Measurements. Specifications subject to change without notice.

MK8-120 High-SpeedManual Steering

RIDE

-ON

TROW

ELS RIDE-ON TROW

ELS

MK8-91 Hydraulic Steering

MK8-75Manual Steering

MODEL MK8-75 MK8-90 MK8-91

Engine Honda GX390 Kohler CommandPRO 23.5Kohler Command

PRO 23.5

Operating Weight 460 lbs (209 kg) 655 lbs (297 kg) 746 lbs (338 kg)

Blades 8

Troweling Path 63 in (161 cm) 76 in (194 cm) 76 in (194 cm)

Fuel Gas

Steering Manual Manual Hydraulic

Rotors 2

Rotor Speeds up to 130 rpm up to 125 rpm up to 125 rpm

MODEL MK8-120 MK8-121

Engine Briggs & Stratton Vanguard 31 High SpeedBriggs & Stratton

Vanguard 35 High Speed


Blades 8

Troweling Path 100 in (254 cm)

Fuel Gas

Steering Manual Hydraulic

Rotors 2

Rotor Speeds up to 180 rpm

R I D E - O N P O W E R T R O W E L S R I D E - O N P O W E R T R O W E L S

WWW.MBW.COM 25

BLITZSCREED® is state-of-the art in vibratory truss screeds. The Blitzscreed is set-up and cleaned in roughly half the time of other screeds. The quick coupling method of joining section shafts is fast and eliminates failure of mechanical connectors.

Blitzscreed sections can be combined to produce screeds up to 75 feet (screeds in 25 to 40 foot range most common).

Blitzscreed is available in engine driven or pneumatic models with hand and auto winch options.

MBW HYDRAULIC POWER WINCHES enhance safe operation with a top mounted engagement lever for instant activation and deactivation. Travel speed is easily adjusted through a simple valve control. The units also have an adjustable relief valve that stops the winches in case of an obstruction. Each end operates independently for maximum maneuverability around columns and other obstacles.

24 WWW.MBW.COM


MECHANICAL BLITZSCREED

( ) Metric Measurement. Specifications subject to change without notice.

MODEL AVS

Length2 ft 4 in (.71 m) 4 ft 4 in (1.32 m) 8 ft 4 in (2.54 m)

Width 15 in (38 cm)

Height 16 in (41 cm)

Weight Per Foot 8.9 lbs/ft (13.2 kg/m)

Vibration up to 8000 vpm

V I B R A T O R Y T R U S S S C R E E D V I B R A T O R Y T R U S S S C R E E DSC

REED

S SCREEDS

AIR BLITZSCREEDMANUAL WINCH

HYDRAULIC POWER WINCH

MODEL MVS

Length2 ft 4 in (.71 m)

4 ft 4 in (1.32 m) 8 ft 4 in (2.54 m)

Width 15 in (38 cm)

Height 16 in (41 cm)

Weight Per Foot 8.3 lbs/ft (12 kg/m)

Vibration up to 2800 vpm

26 WWW.MBW.COM WWW.MBW.COM 27

The MBW ScreeDemonTM is the most innovative and ergonomically designed wet screed on the market.

Variable throttle

Tool-free adjustable handle

Patented dual level anti-vibration system

Sealed exciter with oversized bearings

Magnesium screed bars

Clamping mechanism allows quick and easy attachment of bar to screed


* 18-24 ft bars require two ScreeDemon power units.( ) Metric Measurements. Specifications subject to change without notice.

Extra rigid, double triangular, magnesium screed bar

minimizes variability in vibration

clamps to Screedemon— no holes or hardware through bar

is attached or removed from screed in seconds for cleaning/transport

allows for offsetting of screed for working under protrusions

SCRE

EDS SCREEDS

MODEL WS500Operating Weight 29 lbs (13.2 kg)

Engine Honda GX35

Max Rated Power 1.5 hp (1.12 kW) @7000 rpm

Displacement 2.1 in3 (35 cm3)

Fuel Tank Capacity 0.17 gal (0.64 L)

BARS WIDTH WEIGHT17804 4 ft (1.22 m) 8.1 lbs (3.7 kg)

17806 6 ft (1.83 m) 12.1 lbs (5.5 kg)

17808 8 ft (2.44 m) 16.1 lbs (7.3 kg)

17810 10 ft (3.05 m) 20.1 lbs (9.1 kg)

17812 12 ft (3.66 m) 24.0 lbs (10.9 kg)

17814 14 ft (4.27 m) 28.0 lbs (12.7 kg)

17816 16 ft (4.88 m) 32.0 lbs (14.5 kg)

17818* 18 ft (5.49 m) 36.0 lbs (16.3 kg)

17820* 20 ft (6.10 m) 40.0 lbs (18.1 kg)

17824* 24 ft (7.31 m) 47.9 lbs (21.7 kg)

S C R E E D E M O N ™ V I B R A T O R Y W E T S C R E E D S C R E E D E M O N ™ V I B R A T O R Y W E T S C R E E D

28 WWW.MBW.COM WWW.MBW.COM 29

MBW does not sacrifice mixer quality. You may pay a little more for a MBW MORTAR MIXER, but the returns in lower maintenance and longer life are worth consideration.

( ) Metric Measurements. Specifications subject to change without notice. 2” Ball Hitch Standard.

MOR

TAR

MIX

ERS MORTAR M

IXERS

MODEL MM60 MM80 MM90

Batch Capacity6.0 cu ft

(.17 cu m)1.5-2 bags

8.0 cu ft (.23 cu m)2.5-3 bags

9.0 cu ft (.26 cu m)3-3.5 bags

Drum Wrap End Plates

10 gauge7 gauge

10 gauge7 gauge

10 gauge7 gauge

Standard Axle 46 in solid axle

Wheel 12 x 4.80 inhigh speedST175/80D13

high speedST175/80D13

high speed

Size46 x 64 x 56 in(117 x 163 x

142 cm)

46 x 67 x 57 in(117 x 170 x

145 cm)

46 x 71 x 57 in(117 x 180 x

145 cm)

Weight 650 lbs (295 kg) 715 lbs (324 kg) 730 lbs (331 kg)

Charging Height 47 in (119 cm) 49 in (124 cm)

Engine OptionsHonda GX160Honda GX240

Honda GX240 Honda GX240

Shaft Speed 3500/41 rpm3300/39 rpm 3300/39 rpm 3300/39 rpm

Drive V-belts to Gears

Electric Option 1.5 hp, 1 phase115v/230v2 hp, 1 phase

230v3 hp, 1 phase

230v

Shaft Speed 1725/33 rpm

Drive Chain to V-belts to Gears

M O R T A R M I X E R S M O R T A R M I X E R S

We’re so confident in the superiority of MBW’s mixers that we simply encourage you to take a look and draw your own conclusions. The things to compare include:

paddle shaft and clamping design

bearing capacity

trunnion and pillow block quality

frame strength

drive gears

belt tension mechanism

drum latch/lock system

drum and grid weldments

engine shroud

front leg design

material types

gauge throughout the mixer


MM80


SLIP

FORM

PAV

ERS

The MBW PAVER slip forms curb, curb & gutter and similar profiles with a level of quality that rivals larger pavers. In commercial parking lots and other applications with tight radii, the MBW Paver out performs larger machines. Cost savings associated with use of the MBW Paver are significant and ongoing. Purchase cost is a fraction of large pavers. Transport is accomplished with a pick-up truck and trailer. Crew size can be held to 3-5 people. Maintenance is low.

* Requires Side Drive Unit( ) Metric Measurements. Specifications subject to change without notice.

STYLES C100 CG200*

Hopper Size Options12 in (31 cm) 18 in (46 cm)

24 in (61 cm)30 in (76 cm)36 in (91 cm)

48 in (122 cm)

Max Mold W x H 48 x 18 in (122 x 46 cm)

Max Weight 3360 lbs (1524 kg) up to 4215 lbs (1912 kg)

Width 65 in (165 cm) up to 116 in (295 cm)

Length 112 in (284 cm)

Pour Speed Range 0-40 ft/min (0-12 m/min)

Travel Speed 0-2.5 mph (0-4 km/h)

Drive Tire Size (4-ply foam filled) 23 x 10.5 in (58 x 27 cm)

Trail Tire Size (4-ply foam filled) 18 x 9.5 in (46 x 24 cm)

Slump Range 1-3 in (2.5-7.5 cm)

S L I P F O R M P A V E R SS L I P F O R M P A V E R S

The MBW Paver bridges the gap between hand forming curbs and slip forming with large machines. Two models are available. The two wheel drive C100 pours up to a 12” or 18” width and a maximum height up to 18”.

The three wheel side drive CG200 slip forms profiles up to a 12” - 48” wide and up to 18” high parameter. Given a reasonable level of variable control the MBW paver pours a 3’ radii with smaller configuration molds.

While production rates vary and are dependent on mix, grade, and crew proficiency, 1000 to 1500 feet of curb and gutter would represent a typical day’s pour. In the tack-on curb over pavement application, the MBW Paver has the potential to slipform up to 4000 ft/day.

C100

SLIPFORM PAVERS


NOTE

S NOTESN O T E S N O T E S

compaction & concrete - mbw · 2019. 7. 1. · compaction & concrete construction equipment since...

Documents