compact | narrow linewidth lasers · compact | narrow linewidth lasers • single frequency diode...

5
D0142-R | SEPTEMBER 2020 | WWW.HUBNER-PHOTONICS.COM Compact | Narrow linewidth lasers Single frequency diode pumped lasers (DPL) and narrow linewidth diode (NLD) lasers with up to 500 mW continuous-wave output power Engineered for stable spectral performance and low wavelength drift Integrated spectral filter for ensured side mode suppression ratio (SMSR) Integrated isolator, immune to optical feedback Ultra-robust package and proven field reliability 405 nm, 457 nm, 473 nm, 488 nm, 515 nm, 532 nm, 561 nm, 633 nm, 660 nm, 785 nm, 1064 nm The Cobolt 08-01 Series is a family of narrow linewidth continuous-wave lasers, including diode pumped lasers (DPL) as well as frequency stabilized diode lasers (NLD) operating at fixed wavelengths between 405 nm and 1064 nm with output power up to 500 mW. The lasers are designed and manufactured to ensure the highest level of reliability. Cobolt lasers are built using proprietary HTCure™ manufacturing technology for ultra-robustness into a compact package. The lasers emit a high quality laser beam with very stable characteristics and reliable spectral performance, making them ideal for advanced analytical applications where stable and narrow spectral linewidth is crucial, such as Raman Spectroscopy and Interferometry. The Cobolt 08-01 Series are certified for use as stand-alone laboratory devices, but with a compact design and fully integrated drive and control electronics they are also very well suited for integration as OEM components in analytical instrumentation. -90 -70 -50 -30 -10 10 502 512 522 532 542 552 562 Intensity (dB) Wavelength (nm) Cobolt 08-DPL 532 nm Typical Spectral Purity > 80 dB at 0.1 nm from the main peak 0 10 20 30 40 50 60 70 -5 -4 -3 -2 -1 0 1 2 3 4 5 0 2 4 6 8 10 12 14 16 18 Baseplate Temperature (°C) Change in wavelength (pm) Time (hours) Cobolt 08-NLD 633 nm Typical Wavelength Stability vs Baseplate Temperature Change in Wavelength Temperature Cycle D Dl l min - max < 2 pm over 30 °C -100 -80 -60 -40 -20 0 20 778 785 792 Relative Intensity (dB) Wavelength (nm) Cobolt 08-NLD 785 nm Spectral Purity Comparison 785 nm narrow line diode without filter 08-NLD(M) 785 nm 08-NLD(M) ESP 785 nm Cobolt 08-01 Series Applications Raman Spectroscopy Interferometry Quantum Research

Upload: others

Post on 01-Feb-2021

18 views

Category:

Documents


0 download

TRANSCRIPT

  • D0

    142

    -R

    |

    SE

    PT

    EM

    BE

    R

    20

    20

    |

    WW

    W.H

    UB

    NE

    R-P

    HO

    TO

    NIC

    S.C

    OM

    Compact | Narrow linewidth lasers

    • Single frequency diode pumped lasers (DPL) and narrow linewidth diode (NLD) lasers with up to 500 mW continuous-wave output power

    • Engineered for stable spectral performance and low wavelength drift

    • Integratedspectralfilterforensuredsidemodesuppressionratio(SMSR)

    • Integrated isolator, immune to optical feedback

    • Ultra-robustpackageandprovenfieldreliability

    • 405 nm, 457 nm, 473 nm, 488 nm, 515 nm, 532 nm, 561 nm, 633 nm, 660 nm, 785 nm, 1064 nm

    The Cobolt 08-01 Series is a family of narrow linewidth continuous-wave lasers, including diode pumped lasers (DPL) as well as frequency stabilized diode lasers (NLD)operatingatfixedwavelengthsbetween405nmand1064nmwith output power up to 500 mW. The lasers are designed and manufactured to ensure the highest level of reliability.

    Cobolt lasers are built using proprietary HTCure™ manufacturing technology for ultra-robustness into a compact package. The lasers emit a high quality laser beam with very stable characteristics and reliable spectral performance, making them ideal for advanced analytical applications where stable and narrow spectral linewidth is crucial, such as Raman Spectroscopy andInterferometry. TheCobolt08-01Seriesarecertifiedforuseasstand-alonelaboratorydevices,but with a compact design and fully integrated drive and control electronics theyarealsoverywellsuitedforintegrationasOEMcomponentsinanalyticalinstrumentation.

    -90

    -70

    -50

    -30

    -10

    10

    502 512 522 532 542 552 562

    Inte

    nsit

    y (d

    B)

    Wavelength (nm)

    Cobolt 08-DPL 532 nmTypical Spectral Purity > 80 dB at 0.1 nm from the main peak

    0

    10

    20

    30

    40

    50

    60

    70

    -5

    -4

    -3

    -2

    -1

    0

    1

    2

    3

    4

    5

    0 2 4 6 8 10 12 14 16 18

    Bas

    epla

    te T

    empe

    ratu

    re (°

    C)

    Chan

    ge in

    wav

    elen

    gth

    (pm

    )

    Time (hours)

    Cobolt 08-NLD 633 nm Typical Wavelength Stability vs Baseplate Temperature

    Change in Wavelength

    Temperature Cycle

    DDllmin - max < 2 pm over 30 °C

    -100

    -80

    -60

    -40

    -20

    0

    20

    778 785 792

    Rel

    ativ

    e In

    tens

    ity

    (dB

    )

    Wavelength (nm)

    Cobolt 08-NLD 785 nm Spectral Purity Comparison

    785 nm narrow line diode without filter

    08-NLD(M) 785 nm

    08-NLD(M) ESP 785 nm

    Cobolt 08-01 Series

    Applications RamanSpectroscopy

    Interferometry

    QuantumResearch

  • D0

    142

    -R

    |

    SE

    PT

    EM

    BE

    R

    20

    20

    |

    WW

    W.H

    UB

    NE

    R-P

    HO

    TO

    NIC

    S.C

    OM

    405 nm 457 nm 473 nm 488 nm 515 nm 532 nm 561 nm

    08-NLD 08-DPL 08-NLD 08-DPL

    Center Wavelength (nm) 405.0 ± 0.5 457.0 ± 0.3 473.0 ± 0.3 488.0 ± 0.5 514.4 ± 0.3 532.1 ± 0.3 561.2 ± 0.3

    Power (mW) without isolator [with isolator] (mW)

    40 [30] 30 [25] 50 [40] 40 [n/a] 50 [50]

    25 [25]50 [50]

    100 [100]200 [160]

    25 [n/a]50 [n/a]

    100 [n/a]

    Integrated optical Isolator available Yes No Yes No

    Maximumopticalfeedback 1 % [ 100 %] 1 % [ 100 %] 10 [100%] 1 % [n/a] 10 % [100%] 1 % [n/a]

    Spectralbandwidth(FWHM) < 1 pm <1MHz < 1 pm <1MHzSpectralPurity(SMSR) @ ± > 0.5 nm from the main peak > 40 dB > 60 dB > 40 dB > 60 dB @ ± > 5 nm from the main peak > 80 dB

    Wavelength Stability (8hrs, ± 3°C) < 1 pm

    Beam divergence (full angle, mrad) < 1.2 < 1.3 < 1.2

    Spatial mode M² < 1.3 M² < 1.1 M² < 1.3 M² < 1.1Beam symmetry > 0.90:1 > 0.95:1 > 0.90:1 > 0.95:1

    Beam diameter at aperture 700 ± 100 µm 700 ± 70 µm 700 ± 100 µm 700 ± 70 µm

    Noise,250Hz-2MHz(rms) < 0.2 % < 0.25 %, (typical < 0.15 %) < 0.2 % < 0.25 %, (typical < 0.15 %)

    Power stability over 8 hrs (± 3°C) < 2 %

    PolarizationExtinctionRatio(PER) > 100:1, Vertical

    Total system power consumption < 12 W < 20 W < 12 W < 20 W

    PowerSupplyRequirements 5 V / 3 A 5V / 5A 5 V / 3 A 5V / 5A

    Warranty 24 months 12 months 24 months

    633 nm 660 nm 785 nm 1064 nm

    08-NLD 08-DPL 08-NLD 08-NLD(M) 08-NLD(M)ESP 08-DPL

    Center Wavelength (nm) 632.8 ± 0.5 659.6 ± 0.3 784.8 ± 0.5 1064.2 ± 0.6Power (mW) without isolator [with isolator] (mW)

    n/a [30] 50 [50] n/a [120] n/a [500] n/a [400] 400 [n/a]

    Integrated optical Isolator available Yes Yes Yes No

    Maximumopticalfeedback n/a [ 100 %] 1 % [ 100 %] n/a [ 100 %] 10 % [n/a]

    Spectralbandwidth(FWHM) < 1 pm <1MHz < 1 pm < 70 pm <1MHzSpectralpurity(SMSR) @ ± > 0.5 nm from the main peak > 40 dB > 60 dB > 40 dB > 60 dB > 60 dB @ ± > 5 nm from the main peak > 80 dB

    Wavelength stability (8hrs, ± 3°C) < 1 pm n/a < 1 pm

    Beam divergence (full angle, mrad) < 1.6 < 1.5 < 2.0Horizontal : < 15

    Vertical : < 3< 1.8

    Spatial mode M² < 1.3 M² < 1.1 M² < 1.3 Multimode M² < 1.3

    Beam symmetry > 0.90:1 > 0.95:1 > 0.90:1 n/a > 0.95:1

    Beam diameter at aperture 700 ± 100 µm 700 ± 70 µm 700 ± 100 µmH: 1.4 ± 0.2 mm V: 1.7 ± 0.2 mm

    H: 1.6 ± 0.3 mm V: 1.2 ± 0.2 mm

    1000 ± 100 µm

    Noise,250Hz-2MHz(rms) < 0.2 % < 0.25 % < 0.2 % < 0.25 % < 0.25 %

    Power stability over 8 hrs (± 3°C) < 2 % < 1 % < 2 %

    PolarizationExtinctionRatio(PER) > 100:1, Vertical

    Total system power consumption < 12 W < 20 W < 12 W < 15 W < 20 W

    PowerSupplyRequirements 5V / 3A 5V / 5A 5V / 3A 5V / 3A 5V / 5A

    Warranty 12 months 24 months 12 months 24 months

    PerformanceSpecifications

    ModelNumber

    Cobolt 08-01 Series

    Version:01 Free beam, no optical isolator11 Free beam, integrated optical isolator51 Free beam (ring laser), no optical isolator21 Enhanced Spectral Purity (ESP), free beam with isolatorX6IntegratedMMfibercouplingX7IntegratedSMfibercoupling

    WWWW-08-XX-Y-PPPP-CCC

    MMultimode(beam)

    Wavelength PowerConfiguration:100=USB,CE/CDRHCompliant200=USB,OEM300=RS-232,CE/CDRHCompliant400=RS-232,OEMxxx=OEMcustomization

  • D0

    142

    -R

    |

    SE

    PT

    EM

    BE

    R

    20

    20

    |

    WW

    W.H

    UB

    NE

    R-P

    HO

    TO

    NIC

    S.C

    OM

    This device is sensitive to Elecrostatic Discharge (ESD). Always handle diode lasers with extreme care to prevent elec-trostatic discharge, the primary cause of unexpected diode failure.

    WARNING VISIBLE and INVISIBLE LASER RADIATION Avoid Exposure to beam Class 3B Laser ProductClassified per IEC 60825-1:2014

    Wvl (nm) Max.Pwr (mW)405 360457 400473 400488 200515 400532 400561 400633 200660 400785 STM 300785 ESP 4991064 499

    WARNING INVISIBLE LASER RADIATION Avoid eye or skin exposure to direct or scattered radiation Class 4 Laser ProductClassified per IEC 60825-1:2014

    Wvl (nm) Max.Pwr (mW)785 2000

    Cobolt 08-01 Series

    532 785

    CouplingEfficiency > 60 % > 70 %

    Fiber Connector type FC / PC, Narrow key

    Nominal Numerical Aperture (NA) 0.22

    Fiber type Multimode

    Fiber length 2 m

    Warranty Laser warranty and 12 months on workmanship

    Fiber coupled option - Specifications - Multimode fiber

    Fiber coupled option - Specifications - Single mode fiber

    405 - 660 nm* 785 nm 1064 nm

    CouplingEfficiency > 50 %

    Fiber Connector type FC / APC , Narrow key

    Nominal Numerical Aperture (NA) 0.11 0.12

    Fiber type SM/PM

    Fiber end cap Yes No

    Fiber length 2 m

    Warranty Laser warranty and 12 months on workmanship

    Communication Interface

    Communication USBorRS-232Standard Baudrate 115200

    128mm5,0in

    108mm4,3in

    30mm1,2in

    5mm0,2in

    4,2mm0,2in

    (x4)

    20mm0,8in

    3mm0,1in

    (x2)

    5mm0,2in

    118mm4,6in

    40mm1,6in

    40mm1,6in

    19mm0,7in

    15,5mm0,6in

    Note:1. This product must be compliant to RoHS2 Directive 2011/65/EU

    Den

    na h

    andl

    ing

    får e

    j uta

    n vå

    rt m

    edgi

    vand

    e de

    lges

    anna

    n, k

    opie

    ras

    elle

    r elje

    st o

    behö

    rlige

    n an

    vänd

    as.

    Öve

    rträd

    else

    här

    av b

    eivr

    as m

    ed s

    töd

    av g

    älla

    nde

    lag.

    Cob

    olt A

    B

    This

    doc

    umen

    t mus

    t not

    be

    copi

    ed,e

    ither

    com

    -pl

    etel

    y or

    in p

    art,

    with

    out o

    ur p

    erm

    issi

    on. A

    nyin

    fring

    emen

    t will

    lead

    to le

    gal p

    roce

    edin

    gs.

    Cob

    olt A

    B

    Part of

    Description

    Gen tol Surface treatment

    A3

    Material

    Date (YYYY-MM-DD)

    Changed by

    Drawn by

    Approval

    Size

    Scale

    3D-model

    Drawing No

    AB

    CD

    EF

    GH

    JK

    Rev

    Sheet

    RoughnessFillet radii

    Ra uM

    Edges brokenUnless otherwise stated

    2016-04-06

    1:1ISO 2768-m

    --

    --

    --

    --

    --

    M90350

    1/1

    Draft

    -

    -

    D-01

    Excerpt from ISO 2768-m

    ±0,8 (120)-400 ±0,5

    ±0,3±0,2±0,1

    (6)-30 (30)-120

    (400)-1000

    0,5-6-

    Cobolt 08-11AM

    arvmal

    Data-USB/RS-232

    ToKeyControlBox

    5V Power Supply

    Electrical Interface

    Pin Function

    1 LED1 (Laser on)

    2 LED2 (Error)

    3 Not used

    4 0 V (ref)

    5 Key Switch

    6 Remoteinterlock

    7 RS-232TX

    8 RS-232RX9 Spare 10 0 V GND (ref pin 15)

    11 DirectOn/off

    12 Not used

    13 Not used

    14 Not used

    15 +5Vtokeybox

    08-DPLand08-NLD(M)Laserhead

    08-NLD Laser head

    80mm3,1in

    100mm3,9in

    30mm1,2in

    5mm0,2in

    20mm0,8in

    5mm0,2in

    4,2mm0,2in

    (x4)

    3mm0,1in

    (x2)

    90mm3,5in

    15,5mm0,6in

    19mm0,7in

    40mm1,6in

    40mm1,6in

    Den

    na h

    andl

    ing

    får e

    j uta

    n vå

    rt m

    edgi

    vand

    e de

    lges

    anna

    n, k

    opie

    ras

    elle

    r elje

    st o

    behö

    rlige

    n an

    vänd

    as.

    Öve

    rträd

    else

    här

    av b

    eivr

    as m

    ed s

    töd

    av g

    älla

    nde

    lag.

    Cob

    olt A

    B

    This

    doc

    umen

    t mus

    t not

    be

    copi

    ed,e

    ither

    com

    -pl

    etel

    y or

    in p

    art,

    with

    out o

    ur p

    erm

    issi

    on. A

    nyin

    fring

    emen

    t will

    lead

    to le

    gal p

    roce

    edin

    gs.

    Cob

    olt A

    B

    Part of

    Description

    Gen tol Surface treatment

    A3

    Material

    Date (YYYY-MM-DD)

    Changed by

    Drawn by

    Approval

    Size

    Scale

    3D-model

    Drawing No

    AB

    CD

    EF

    GH

    JK

    Rev

    Sheet

    RoughnessFillet radii

    Ra uM

    Edges brokenUnless otherwise stated

    2016-06-01

    1:1ISO 2768-m

    --

    --

    --

    --

    --

    M90300

    1/1

    3,2

    0,2

    F-01

    Excerpt from ISO 2768-m

    ±0,8 (120)-400 ±0,5

    ±0,3±0,2±0,1

    (6)-30 (30)-120

    (400)-1000

    0,5-6-

    Cobolt 06-01AM

    arvmal

    Data - USB

    ToKeyControlBoxandDataRS-232

    5V Power Supply

    RemoteInterlock

    VGA15pin-ToKeycontrolbox

    Pin Function

    1 Remoteinterlock

    2 0 V – Ground

    3 DirectOn/Off(+5VInput)

    4 Key Switch

    5 LED 1 (Laser On)

    6 LED 2 (Error)

    Molex6pin-ToKeycontrolbox

    SMA-Not used

    * Not including 488 nm

  • D0

    142

    -R

    |

    SE

    PT

    EM

    BE

    R

    20

    20

    |

    WW

    W.H

    UB

    NE

    R-P

    HO

    TO

    NIC

    S.C

    OM

    80mm3,1in

    100mm3,9in

    30mm1,2in

    5mm0,2in

    20mm0,8in

    5mm0,2in

    4,2mm0,2in

    (x4)

    3mm0,1in

    (x2)

    90mm3,5in

    40mm1,6in

    40mm1,6in

    19mm0,7in

    15,5mm0,6in

    Note:1. This product must be compliant to RoHS2 Directive 2011/65/EU

    Den

    na h

    andl

    ing

    får e

    j uta

    n vå

    rt m

    edgi

    vand

    e de

    lges

    anna

    n, k

    opie

    ras

    elle

    r elje

    st o

    behö

    rlige

    n an

    vänd

    as.

    Öve

    rträd

    else

    här

    av b

    eivr

    as m

    ed s

    töd

    av g

    älla

    nde

    lag.

    Cob

    olt A

    B

    This

    doc

    umen

    t mus

    t not

    be

    copi

    ed,e

    ither

    com

    -pl

    etel

    y or

    in p

    art,

    with

    out o

    ur p

    erm

    issi

    on. A

    nyin

    fring

    emen

    t will

    lead

    to le

    gal p

    roce

    edin

    gs.

    Cob

    olt A

    B

    Part of

    Description

    Gen tol Surface treatment

    A3

    Material

    Date (YYYY-MM-DD)

    Changed by

    Drawn by

    Approval

    Size

    Scale

    3D-model

    Drawing No

    AB

    CD

    EF

    GH

    JK

    Rev

    Sheet

    RoughnessFillet radii

    Ra uM

    Edges brokenUnless otherwise stated

    2016-06-22

    1:1ISO 2768-m

    --

    --

    --

    --

    --

    M90360

    1/1

    -

    -

    F-01

    Excerpt from ISO 2768-m

    ±0,8 (120)-400 ±0,5

    ±0,3±0,2±0,1

    (6)-30 (30)-120

    (400)-1000

    0,5-6-

    Cobolt 08-01AM

    arvmal

    Laser Head without Isolator

    MechanicalSpecifications

    128mm5,0in

    108mm4,3in

    30mm1,2in

    5mm0,2in

    4,2mm0,2in

    (x4)

    20mm0,8in

    3mm0,1in

    (x2)

    5mm0,2in

    118mm4,6in

    40mm1,6in

    40mm1,6in

    19mm0,7in

    15,5mm0,6in

    Note:1. This product must be compliant to RoHS2 Directive 2011/65/EU

    Den

    na h

    andl

    ing

    får e

    j uta

    n vå

    rt m

    edgi

    vand

    e de

    lges

    anna

    n, k

    opie

    ras

    elle

    r elje

    st o

    behö

    rlige

    n an

    vänd

    as.

    Öve

    rträd

    else

    här

    av b

    eivr

    as m

    ed s

    töd

    av g

    älla

    nde

    lag.

    Cob

    olt A

    B

    This

    doc

    umen

    t mus

    t not

    be

    copi

    ed,e

    ither

    com

    -pl

    etel

    y or

    in p

    art,

    with

    out o

    ur p

    erm

    issi

    on. A

    nyin

    fring

    emen

    t will

    lead

    to le

    gal p

    roce

    edin

    gs.

    Cob

    olt A

    B

    Part of

    Description

    Gen tol Surface treatment

    A3

    Material

    Date (YYYY-MM-DD)

    Changed by

    Drawn by

    Approval

    Size

    Scale

    3D-model

    Drawing No

    AB

    CD

    EF

    GH

    JK

    Rev

    Sheet

    RoughnessFillet radii

    Ra uM

    Edges brokenUnless otherwise stated

    2016-04-06

    1:1ISO 2768-m

    --

    --

    --

    --

    --

    M90350

    1/1

    Draft

    -

    -

    D-01

    Excerpt from ISO 2768-m

    ±0,8 (120)-400 ±0,5

    ±0,3±0,2±0,1

    (6)-30 (30)-120

    (400)-1000

    0,5-6-

    Cobolt 08-11AM

    arvmal

    Laser Head with Isolator

    LaserHeadwithintegratedfibercoupler

    136mm5,4in

    110mm4,3in

    30mm1,2in

    20mm0,8in

    3mm0,1in

    (x2)

    5mm0,2in

    5mm0,2in

    4,2mm0,2in

    (x4)

    126mm5,0in

    40mm1,6in

    43mm1,7in

    22mm0,9in

    20mm0,8in

    Note:1. This product must be compliant to RoHS2 Directive 2011/65/EU

    Den

    na h

    andl

    ing

    får e

    j uta

    n vå

    rt m

    edgi

    vand

    e de

    lges

    anna

    n, k

    opie

    ras

    elle

    r elje

    st o

    behö

    rlige

    n an

    vänd

    as.

    Öve

    rträd

    else

    här

    av b

    eivr

    as m

    ed s

    töd

    av g

    älla

    nde

    lag.

    Cob

    olt A

    B

    This

    doc

    umen

    t mus

    t not

    be

    copi

    ed,e

    ither

    com

    -pl

    etel

    y or

    in p

    art,

    with

    out o

    ur p

    erm

    issi

    on. A

    nyin

    fring

    emen

    t will

    lead

    to le

    gal p

    roce

    edin

    gs.

    Cob

    olt A

    B

    Part of

    Description

    Gen tol Surface treatment

    A3

    Material

    Date (YYYY-MM-DD)

    Changed by

    Drawn by

    Approval

    Size

    Scale

    3D-model

    Drawing No

    AB

    CD

    EF

    GH

    JK

    Rev

    Sheet

    RoughnessFillet radii

    Ra uM

    Edges brokenUnless otherwise stated

    2017-03-31

    1:1ISO 2768-m

    --

    --

    --

    --

    --

    M90373

    1/1

    -

    -

    C-01

    Excerpt from ISO 2768-m

    ±0,8 (120)-400 ±0,5

    ±0,3±0,2±0,1

    (6)-30 (30)-120

    (400)-1000

    0,5-6-

    AM

    arvmal

    Cobolt 08-01 Series

    136mm5,4in

    110mm4,3in

    30mm1,2in

    20mm0,8in

    3mm0,1in

    (x2)

    5mm0,2in

    5mm0,2in

    4,2mm0,2in

    (x4)

    126mm5,0in

    40mm1,6in

    43mm1,7in

    22mm0,9in

    20mm0,8in

    Note:1. This product must be compliant to RoHS2 Directive 2011/65/EU

    Den

    na h

    andl

    ing

    får e

    j uta

    n vå

    rt m

    edgi

    vand

    e de

    lges

    anna

    n, k

    opie

    ras

    elle

    r elje

    st o

    behö

    rlige

    n an

    vänd

    as.

    Öve

    rträd

    else

    här

    av b

    eivr

    as m

    ed s

    töd

    av g

    älla

    nde

    lag.

    Cob

    olt A

    B

    This

    doc

    umen

    t mus

    t not

    be

    copi

    ed,e

    ither

    com

    -pl

    etel

    y or

    in p

    art,

    with

    out o

    ur p

    erm

    issi

    on. A

    nyin

    fring

    emen

    t will

    lead

    to le

    gal p

    roce

    edin

    gs.

    Cob

    olt A

    B

    Part of

    Description

    Gen tol Surface treatment

    A3

    Material

    Date (YYYY-MM-DD)

    Changed by

    Drawn by

    Approval

    Size

    Scale

    3D-model

    Drawing No

    AB

    CD

    EF

    GH

    JK

    Rev

    Sheet

    RoughnessFillet radii

    Ra uM

    Edges brokenUnless otherwise stated

    2017-03-31

    1:1ISO 2768-m

    --

    --

    --

    --

    --

    M90373

    1/1

    -

    -

    C-01

    Excerpt from ISO 2768-m

    ±0,8 (120)-400 ±0,5

    ±0,3±0,2±0,1

    (6)-30 (30)-120

    (400)-1000

    0,5-6-

    AM

    arvmal

    82mm3,2in

    32mm1,3in

    56,60mm2,2in

    82mm3,2in

    Den

    na h

    andl

    ing

    får e

    j uta

    n vå

    rt m

    edgi

    vand

    e de

    lges

    anna

    n, k

    opie

    ras

    elle

    r elje

    st o

    behö

    rlige

    n an

    vänd

    as.

    Öve

    rträd

    else

    här

    av b

    eivr

    as m

    ed s

    töd

    av g

    älla

    nde

    lag.

    Cob

    olt A

    B

    This

    doc

    umen

    t mus

    t not

    be

    copi

    ed,e

    ither

    com

    -pl

    etel

    y or

    in p

    art,

    with

    out o

    ur p

    erm

    issi

    on. A

    nyin

    fring

    emen

    t will

    lead

    to le

    gal p

    roce

    edin

    gs.

    Cob

    olt A

    B

    Part of

    Description

    Gen tol Surface treatment

    A3

    Material

    Date (YYYY-MM-DD)

    Changed by

    Drawn by

    Approval

    Size

    Scale

    3D-model

    Drawing No

    AB

    CD

    EF

    GH

    JK

    Rev

    Sheet

    RoughnessFillet radii

    Ra uM

    Edges brokenUnless otherwise stated

    2018-04-12

    1:1ISO 2768-m

    --

    --

    --

    --

    --

    M12482

    1/1

    3,2

    0,2

    A-01

    Excerpt from ISO 2768-m

    ±0,8 (120)-400 ±0,5

    ±0,3±0,2±0,1

    (6)-30 (30)-120

    (400)-1000

    0,5-6-

    Skyra Key BoxOH

    oschal

    Art. Nr. 12482Keybox

    82mm3,2in

    32mm1,3in

    56,60mm2,2in

    82mm3,2in

    Den

    na h

    andl

    ing

    får e

    j uta

    n vå

    rt m

    edgi

    vand

    e de

    lges

    anna

    n, k

    opie

    ras

    elle

    r elje

    st o

    behö

    rlige

    n an

    vänd

    as.

    Öve

    rträd

    else

    här

    av b

    eivr

    as m

    ed s

    töd

    av g

    älla

    nde

    lag.

    Cob

    olt A

    B

    This

    doc

    umen

    t mus

    t not

    be

    copi

    ed,e

    ither

    com

    -pl

    etel

    y or

    in p

    art,

    with

    out o

    ur p

    erm

    issi

    on. A

    nyin

    fring

    emen

    t will

    lead

    to le

    gal p

    roce

    edin

    gs.

    Cob

    olt A

    B

    Part of

    Description

    Gen tol Surface treatment

    A3

    Material

    Date (YYYY-MM-DD)

    Changed by

    Drawn by

    Approval

    Size

    Scale

    3D-model

    Drawing No

    AB

    CD

    EF

    GH

    JK

    Rev

    Sheet

    RoughnessFillet radii

    Ra uM

    Edges brokenUnless otherwise stated

    2018-04-12

    1:1ISO 2768-m

    --

    --

    --

    --

    --

    M12482

    1/1

    3,2

    0,2

    A-01

    Excerpt from ISO 2768-m

    ±0,8 (120)-400 ±0,5

    ±0,3±0,2±0,1

    (6)-30 (30)-120

    (400)-1000

    0,5-6-

    Skyra Key BoxOH

    oschal

  • D0142-R

    |

    SEPTEMBER2020|WWW.HUBNER-PHOTONICS.COM

    Our Locations

    HÜBNER Photonics Inc.(Sales in USA, Canada and Mexico)San Jose, California, USAPhone: +1 (408) 708 4351Fax:+1(408)4902774E-mail: [email protected]

    Austrailia, Benelux, Brazil, China, Estonia, Latvia, Lithuania,France, India, Israel, Italy, Japan, Poland, Russia, Belarus,Singapore, Malaysia,Thailand,SouthKorea,SpainandPortugal,Taiwan

    Find local sales representatives at www.hubner-photonics.com

    HÜBNER UK Limited(Sales in UK & Ireland)Derby, Great BritainPhone: +44 2380 438701E-mail: [email protected]

    Cobolt AB (Sales in Norway, Sweden, Finland and Denmark)Solna, SwedenPhone: +46 8 545 912 30Fax:+46854591231E-mail: [email protected]

    HÜBNER GmbH & Co. KG(Sales in Germany, Switzerland and Austria)Kassel, GermanyPhone: +49 6251 770 6686Fax: +49 6251 860 9917E-mail: [email protected]

    Cobolt 08-01 Series

    Note:1. This product must be compliant to RoHS2 Directive 2011/65/EU

    Den

    na h

    andl

    ing

    får e

    j uta

    n vå

    rt m

    edgi

    vand

    e de

    lges

    anna

    n, k

    opie

    ras

    elle

    r elje

    st o

    behö

    rlige

    n an

    vänd

    as.

    Öve

    rträd

    else

    här

    av b

    eivr

    as m

    ed s

    töd

    av g

    älla

    nde

    lag.

    Cob

    olt A

    B

    This

    doc

    umen

    t mus

    t not

    be

    copi

    ed,e

    ither

    com

    -pl

    etel

    y or

    in p

    art,

    with

    out o

    ur p

    erm

    issi

    on. A

    nyin

    fring

    emen

    t will

    lead

    to le

    gal p

    roce

    edin

    gs.

    Cob

    olt A

    B

    Part of

    Description

    Gen tol Surface treatment

    A3

    Material

    Date (YYYY-MM-DD)

    Changed by

    Drawn by

    Approval

    Size

    Scale

    3D-model

    Drawing No

    AB

    CD

    EF

    GH

    JK

    Rev

    Sheet

    RoughnessFillet radii

    Ra uM

    Edges brokenUnless otherwise stated

    2016-03-31

    1:2ISO 2768-m

    --

    --

    --

    --

    --

    M90374

    3/3

    -

    -

    A-01

    Excerpt from ISO 2768-m

    ±0,8 (120)-400 ±0,5

    ±0,3±0,2±0,1

    (6)-30 (30)-120

    (400)-1000

    0,5-6-

    Fibercoupling assembly 08-11AM

    arvmal

    M90374

    Options and Accessories

    • C-FLEX Laser combiner

    • Laser head heatsink HS-03

    • TEC Plate for active temperature control

    • Mountingplateforfibercoupling(FIC-06)D

    enna

    han

    dlin

    g få

    r ej u

    tan

    vårt

    med

    giva

    nde

    delg

    esan

    nan,

    kop

    iera

    s el

    ler e

    ljest

    obe

    hörli

    gen

    anvä

    ndas

    vertr

    ädel

    se h

    ärav

    bei

    vras

    med

    stö

    d av

    gäl

    land

    e la

    g.C

    obol

    t AB

    This

    doc

    umen

    t mus

    t not

    be

    copi

    ed,e

    ither

    com

    -pl

    etel

    y or

    in p

    art,

    with

    out o

    ur p

    erm

    issi

    on. A

    nyin

    fring

    emen

    t will

    lead

    to le

    gal p

    roce

    edin

    gs.

    Cob

    olt A

    B

    Part of

    Description

    Gen tol Surface treatment

    A3

    Material

    Date (YYYY-MM-DD)

    Changed by

    Drawn by

    Approval

    Size

    Scale

    3D-model

    Drawing No

    AB

    CD

    EF

    GH

    JK

    Rev

    Sheet

    RoughnessFillet radii

    Ra uM

    Edges brokenUnless otherwise stated

    1:1ISO 2768-m

    --

    --

    --

    --

    --

    2/2

    -

    -Excerpt from ISO 2768-m

    ±0,8 (120)-400 ±0,5

    ±0,3±0,2±0,1

    (6)-30 (30)-120

    (400)-1000

    0,5-6-

    M90334

    Heatsink HS-03 TEC-Plate for active temperature control

    Mounting plate for fiber coupling FIC-06

    C-FLEX Laser combiner