How to check Sony Ericsson W200i batteryvoltage

Guide to remove and check for battery problems in the Sony Ericsson W200i.

Escrito por: Ryan Waltman

How to check Sony Ericsson W200i battery voltage

© iFixit — CC BY-NC-SA es.iFixit.com Página 1 de 5

INTRODUCCIÓN

Checking the battery is fairly easy, all you will need is a multimeter, which can be purchased at alocal hardware store.

HERRAMIENTAS:Digital Multimeter (1)

PARTES:Sony Ericsson Standard Battery BST-36

(1)

How to check Sony Ericsson W200i battery voltage

© iFixit — CC BY-NC-SA es.iFixit.com Página 2 de 5

Paso 1 — Disassembling Sony Ericsson W200i Battery

Slide the battery cover up and off the phone.

Paso 2

Pop the battery out of its slot by lifting it up.

How to check Sony Ericsson W200i battery voltage

© iFixit — CC BY-NC-SA es.iFixit.com Página 3 de 5

Paso 3 — How to check Sony Ericsson W200i battery voltage

Plug the red probe into the center jack, the black probe into the bottom jack, and turn the rangeselector switch to 20 DCV.

Turn the multimeter on.

Paso 4

Touch the red probe to the indicatedpositive side and the black probe tothe indicated negative side.

Replace the battery if the voltagereads below 2.5 volts.

How to check Sony Ericsson W200i battery voltage

© iFixit — CC BY-NC-SA es.iFixit.com Página 4 de 5

To reassemble your device, follow these instructions in reverse order.

La versión más reciente de este documento fue generada en 2018-05-14 04:11:30 PM .

How to check Sony Ericsson W200i battery voltage

© iFixit — CC BY-NC-SA es.iFixit.com Página 5 de 5