COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS

WEBSITE: www.jdsu.com

8635Telecom Protocol Analyzer

The JDSU 8635 is a powerful, portable protocol analyzer used for effective testing of all fixed inter-faces of mobile radio networks (GSM, GSM-R, GPRS, CDMA, UMTS, WiMAX), access networks (V5, ISDN, GR303) and SS#7 networks. It supports todays complex multi-technology networks like converged networks or HSDPA for UMTS and offers powerful applications for detailed analysis and statistical evaluation of signaling information on-line and off-line. The JDSU 8635 is designed for installation, maintenance, troubleshooting and network optimization.

The telecom protocol analyzer is particularly valuable for:

integration test labs of manufacturers and operators

professional service teams of network element manufacturers,

engineering, planning, operation and maintenance teams of operators.

The modular concept allows to combine various test interfaces and extend their number, to add applications and decodes. The JDSU 8635 provides the platform for future technologies that grows with your needs.

Key Features Full range of telecom protocol decodes for WiMAX, UMTS incl. HSDPA, GSM/GPRS/EDGE, CDMAone, CDMA 2000, 1x EV-DO, IMS, ACCESS and SS7 networks - Suitable for all 2G, 2.5G, 3G and NGN technologies

Rugged modular portable analyzer with integrated 15 display

1.8 GHz CPU main board with large disk drive and 4 USB 2.0 interfaces

5 slots for measurement boards

Measurement boards are: 2 E1/T1 PCM trunks (4 Rx) 1 10/100/1000 Ethernet (2 Rx) 2 STM-1/OC-3 optical trunks (4 Rx) 4 E1/T1 PCM and ATM card

Easy to operate analyzer, running under Windows XP

Comprehensive recorder, filter, trigger and post processing capabilities

8635 TELECOM PROTOCOL ANALYZER

2

Filter

With filters down to bit level the displayed information is customized and reduced to what is of main interest for the user. Filter categories:

Protocol filter: on all protocol layers, at messages level, information elements level, down to information element contents level (decimal, binary or mnemonic values). Link filter Error filter Event type filter Pattern filter Length filter Direction filter Composite filter

Protocol Analyzer Application

These decoding and post-processing features are the same for on-line and off-line usage and included in both packages: 8635 protocol analyzer and 8635 off-line protocol analyzer.

Protocol viewer

The protocol viewer is the main function of the analyzer. In summary and detail view the decoded information of the monitored link is displayed.

Summary view

This window provides: One event per line Event parameters listed in columns per default: Direction, physical

link (trunk, timeslot), logical link, call identifier, message contents, timestamp

User preferences for customizing the summary view: Timestamp format and reference start time Font Display depth of message contents column: user-definable informa-tion at protocol, message and information element level Protocol identification: different colors for different protocols Signaling point code/circuit identification code display selectable (names, hex, decimal)

User definable columns: order of columns selectable Columns displaying user-defined information can be added

Display settings can be saved

Detail view

This window provides: Complete plain text and parametric decoding of all messages and

information elements Binary view Hex view User preferences for customizing the detail view

Display depth: User definable suppression of less relevant information at protocol level, message level, and information element level Binary view on/off Timestamp format Font Protocol identification: different colors for different protocols Signaling point code/circuit identification code display selectable (names, hex, decimal) Hex view font and color settings Settings can be saved

Find function

In a huge amount of data this feature helps quick and easy location of any specified parameter below. Protocol messages, information elements and information element

contents (e.g. calling party number) Frame number Date/time

8635 TELECOM PROTOCOL ANALYZER

3

Filters can be combined logically using the operators AND, OR, NOT Short cut buttons for frequently used filters grouped as:

Suppress filters, Show filters Filter settings can be saved

Data export

Frames in summary and detail view can be selected to esport to: ASCII CSV Binary (8635, 8620 and MA-10 format) HTML Wireshark, pcap

Call traceA right mouse click assembles the signaling information related to one specific call/session and displays it in a separate window. Can be activated for message selected in the summary view or detail

view Can be started (depending on protocol) by phone number, mobile ID

or a session Call trace result window is enhanced with Graphical window (Abis

only) Tabular call trace window (Abis only) and Rec. File Format (optional)

Simultaneous graphical view for call trace on Abis interface of up to 5 parameters (axes are scalable): RxLev (for BTS, MS and neighbor cells) RxQual (for BTS and MS) Timing Advance MS Power (in dBm) BS Power (in dB)

Graphical Call FlowA graphical message flow diagram can be created from a call trace or ses-sion trace and exported to a pdf document. This can be done also through different interfaces.

Call data records

Call data records show a summary of main information of all calls/ses-sions at a glance. The tabular overview provides the user with parameters on per call basis.

Created on-line and off-line Expansion of a CDR contains all frames of a call (call trace; session

trace based on a PDP context). Contain following information elements per call, depending on

monitoring interface: Start time Duration Stop time Status of call Call setup time Call release time OPC (originated point code)/DPC

Can optionally contain: Called/calling party number Original/redirecting/redirection number Release cause Call type Transmission medium requested IMSI, TMSI, BVCI, TLLI, ...

User-defined columns as in the summary view can be added Columns can be hidden or changed in order Filters on CDR information elements possible Event counters on CDR information elements possible

8635 TELECOM PROTOCOL ANALYZER

4

Event Counter

Event Counter is a powerful and flexible application which supports the user in reporting as well as troubleshooting tasks. Any event or mes-sage can be defined for counting. By setting thresholds to a maximum or minimum level, the occurrence of critical numbers of events are easily determined and corrective actions can be taken. Identical for on-line (real-time statistics) and off-line (post process-

ing) use Event counters can be set per timeslot. The configured timeslots are

automatically detected and displayed. Fully user-definable event counters, with the possibility for any ele-

ment of a protocol or CDR to be counted. User-defined measurement interval selection down to a minimum of

1 second User-definable counter categories Counters defined using the standard filter dialog (see filter descrip-

tion for settings) Filters can be imported and used as counter definition, counters can

be exported and used as filter definition. Counter definitions can be saved and ex- or imported to/from other

863x. User-definable upper and lower threshold values Alarm generated if the counter value exceeds the threshold. An alarm

log is generated to track triggering event. Display formats:

Bar chart Manhattan chart Pie chart Table Timeline

Graphical display of min/max alarm Data export in CSV format, for reuse of statistics in reports (spread-

sheet, word processor, etc.) Graphical printout, for reuse of statistics in reports

Supported Counter Types

Filtered Counters, counting for occurences of specific protocol ele-ments. All kinds of protocol elements are possible.

Dynamical Counters, can be set to any protocol element. For each new value of the selected protocol element a new counter is generated. Thus, the total of different values will be counted.

Load Counters, counter which analyses the traffic load, either in Erlang or kbit/s.

Calculated Counter, counter which results from an arithmetic operation between counters.

Field Value Counter, counter which calculates min, max, average and sum of array contents.

Load Analysis

Load Analysis measures the signaling load of monitored links and allows fast determination of traffic and capacity problems in the network.

Analysis of load per signaling timeslot in mErlang Auto-detection and display of timeslots Graphical display of load:

Tabular Bar chart Manhattan chart Timeline

Displayed channels can be selected Graphical display of min/max alarm

8635 TELECOM PROTOCOL ANALYZER

5

Special functions for GPRS and UMTS analysis

Reassembly

This function operates at Abis and IuB interfaces. With RLC/MAC reas-sembling of PCU frames, these protocols can be decoded and analyzed.

IuB & Gb deciphering

In UMTS and GPRS user and control plane an encrypted mode can be transmitted over the radio access network interfaces. The 8635 deciphers the encrypted data at Gb and IuB interfaces: by simultaneous monitoring of Gr and Gb interface and gathering

deciphering information on both interfaces by monitoring of the Gb interface only. The deciphering key kc has to

be inserted manually by the user for the corresponding IMSI. by simultaneous monitoring of IuPS/IuCS and IuB.

Applications for on-line analysisThese features are included in the 8635 protocol analyzer and are only required for on-line analysis.

Recorder

Starting the recorder captures all data to HDD. By setting filters prior to recording the amount of stored data can be reduced. Several recorders can run simultaneously.

Record filters for PCR FISUs Messages Information elements Information element contents

Record start modes Manual Automatic at predefined start time

Record stop modes Manual Automatic at predefined stop time Automatic when remaining hard disk space reaches predefined value

Online display information Elapsed time Start time Number of captured events and size of capture file Name of capture file

Recording scheduler

The Recording Scheduler allows a 24/7 recording, based on user-defined time interval and capture of new recording files with new file name. The completed capture file can be uploaded to a fileserver automatically.

With this function permanent monitoring is easy for the user. Files are generated and stored in an automated way making monitoring more effi-cient.

Time stamps The time stamp resolution is 1 s. Time stamps are synchronized across multiple interfaces, whatever

the type of interface (E1/T1 PCM, FastEthernet, STM-1/OC-3). Time stamps per frame are displayed in the summary view. The dis-

play setting can be in absolute time or relative to a selected frame.

Automatic configuration

The 8635 automatically detects and configures the number of installed cards and interfaces. Timeslots are detected automatically if they are HDLC frames.

Configuration of System level Card level Interface level

Scanner

Automatic detection of signaling channel contents on Abis interface: 64/56 kb/s: FAS/NFAS, signaling, PCM idle pattern, static pattern 16 kb/s: Idle speech TRAU, speech TRAU, data TRAU, O&M TRAU,

static pattern, signaling 8 kb/s: Speech TRAU, data TRAU, O&M TRAU, static pattern

Alarm monitorLayer 1 problems are monitored to determine problems with the basic

connection to the system under test. Two software indicators (Rx1, Rx2) per PCM/Ethernet/STM-1/OC-

3c link, i.e. 16 software indicators when four E1/T1 boards are fitted Software indicator is red if link is not connected or an alarm occurs.Software indicator is green if link is connected and no alarm occurs. Click on software indicator to get a receiver-specific detail view of

layer 1 alarms

8635 TELECOM PROTOCOL ANALYZER

6

Triggers

By using triggers the user is able to carry out monitoring tasks in an auto-mated way. Recording e.g. can be started only when a certain message occurs, eliminating the capturing of non-useful information and increas-ing the efficiency of the evaluation. Combination of a specified condition and one or more predefined

actions Conditions:

Length of a frame Frame type Errors Protocol elements

Actions: Activate condition Activate condition once Insert text message into data file Start recording Stop recording Pause recording

Multi-user functionality

The 8635 can be operated in a multi-user environment. In that case the analyzer is monitoring links at a network element and creating a capture file while several users at remote PCs can look at the capture file and per-form different analysis tasks.

For detailed information refer to 8635 configuration of 3G/UMTS.

7Specifications

8635 TELECOM PROTOCOL ANALYZER

PC system

CPU Pentium M, 1.8 GHzRAM 1 GBMeasurement board slots 5

Disk drives2.5 hard disk 120 GB minCD-ROM CD Write 24, CD Rewrite 10CD/DVD combo drive

InterfacesSerial (COM1) V.24

(9-way subminiature D plugExternal keyboard PS/2External mouse USB/PS/2External monitor VGA socket

(15-way 3-row)Ethernet 10/100/1000 Base-Tx RJ 45USB 2.0 4 USB Single A

Display15TFT LCD module 1024768 pixelsBrightness approx. 200 cd/m2Integrated TouchpadOperating System Windows XP

E1/T1 board 2 trunks

Connectors on front panel

4 input connectors, unbalanced Bueschel 1.6/5.64 input connectors, balanced Lemosa EGG.0B.302

RAM 64 MB

Physical characteristicsReceiver input, unbalanced

Impedance, terminated 75 Return loss (f 2 kInput voltage operating range 70 mVpeak to 3 VpeakMaximum input voltage 7.5 VpeakJitter compatibility as per ITU-T G.823/G.824Max. bidirectional timeslots per card 32Receiver input, balancedImpedance, terminated

100/120

Return loss (f 2 kInput voltageoperating range

70 mVpeak to 3.6 Vpeak

Maximum input voltage 7.5 VpeakJitter compatibility as per ITU-T G.823/G.824

Clock input/outputOne connector for clock input or clock output.

E1/T1 ATM and PCM board 4 trunks

Connectors on front panel (ATM and PCM)

8 E1/T1 RJ45

Physical characteristics (ATM and PCM)Receiver input, unbalanced

Impedance, terminated 100/120 Return loss as per ITU-T G.703High impedance >2 kInput voltage operating range 70 mVpeak to 3.3 VpeakJitter compatibility as per ITU-T G.823/G.824

Connector pinning

Pin Signal Input/Output1 RX+ Input2 RX- Input3 to 8 not connected

Electrical interface E1 (PCM 30 and PCM 31)

Bit rate 2.048 Mb/sLine coding HDB3Connector RJ45Insertion loss -18 dBSensitivity -35 dB

Electrical interface T1 PCM

Bit rate 1.544 Mb/sLine coding B3ZSConnector RJ45Insertion loss -14 dBSensitivity -35 dB

Features E1/T1 PCMMonitoring of up to 128 bidirectional channels Support of HSL based on Q.703 including Annex A for ITU-T and MPT protocols

Electrical interface E1 ATM

Bit rate 2.048 Mb/sLine coding HDB3Connector RJ45Insertion loss -18 dBSensitivity -35 dB

8Specifications

8635 TELECOM PROTOCOL ANALYZER

Electrical interface T1 ATM

Bit rate 1.544 Mb/sLine coding B8ZSConnector RJ45Insertion loss -14 dBSensitivity -35 dB

Features E1/T1 ATMMonitoring of 4 E1 ATM or 4 T1 ATM links Support of HSL based on Q.2210 or JT-Q.2210 IMA capability, up to IMA-4

10/100 Ethernet board 2 trunks

Connectors on front panel

4 full duplex 10/100 Mb/sEthernet input connectors

RJ45

CPU Intel Core 2 Duo, 2,16 GHzRAM 1 GBData path 32/64 bit CPU/PCI busCompatibility PCI Rev.2.1, IEEE 1386 (PMC), IEEE 802.3Clock/Calendar Real-time clock

10/100/1000 Ethernet board 1 trunk

Connectors on front panel

2 full duplex 10/100/1000 Mb/sEthernet input connectors

RJ45

Or 2 full duplex 1000 Mb/sEthernet input connectors

1000Base SC multimode optical fiber

CPU Intel Core 2 Duo, 2,16 GHzRAM 1 GBData path 32/64 bit CPU/PCI busCompatibility PCI Rev.2.1, IEEE 1386 (PMC),

IEEE 802.3Clock/Calendar Real-time clock

STM-1/OC-3c board 2 trunks

Optical

Connectors on front panel

4 duplex connectors, optical SC Duplex (Transmit, Receive)1 input connector, unbalanced Rosenberger 1.6/5.6 series

Physical Characteristics

Optical interface Class 1 Laser productOptical transceiver mode Single mode duplex 155 Mb/sOptical receiver input wave-length of operation

1100 to 1600 nm

maximum input power -7 dBmminimum input power -33 dBmsignal detect hysteresis 1 to 4 dB

Optical transmitter output

Output wavelength 1261 to 1360 nm (typ. 1310 nm)Transmit power -15 to -7 dBmOutput spectrum width max. 7.7 nmOptical rise and fall time max. 2 nsTotal jitter max 1.2 ns

or

Optical transmitter output

Output wavelength 1510 to 1590 nm (typ. 1550 nm)Transmit power -15 to -7 dBmOutput spectrum width max. 7.7 nmOptical rise and fall time max. 2 nsTotal jitter max 1.2 ns

9Specifications

8635 TELECOM PROTOCOL ANALYZER

General specifications

Safety IEC 61010-1Safety class IOver-voltage category (II for normal AC power supply)

II

Pollution grade (2 for normal AC PSU, non cast)

2

Power supply from built-inswitch-mode AC PSU

Maximum power consumption 255 VAAC line frequency, operating range 47 Hz to 63 HzAC line voltage, nominal range 100 V to 240 VOperating range 85 V to 264 VEMC emission IEC/EN 61326 1997 class B

(CISPR 11 class B)AC line feedback IEC/EN 61000-3-2/-3EMC immunity IEC/EN 61326 1997

Miscellaneous data

Dimensions(widthheightdepth in operating position) in mm

approx. 360180320

Weight excluding measurement cards approx. 12 kg

Climatic and mechanical environmental conditions (PS 011/04/02)

Application Environment class as per IEC 721-3 ETS 300019-1

Storage Class IE 12 Class 1.1Transport Class IE 23 with 2M3 Class 2.3 with 2M3Operation Class IE 72 Class 7.1 with 7M2

Table 1: Environmental classification for 8635.

Effect Test standard ApplicationIEC/IEN Storage Transport Operation

Temp-erature

60068-2-1 and 60068-2-2

Extended to -25C ( 5C) to +45C if required

-40C to +70C +5C to 40C

Relative humidity

60068-2-56

10Ordering information

8635 TELECOM PROTOCOL ANALYZER

BT226205 8635 Protocol Analyzer

The instrument for on-line and off-line analysis can be equipped with decoding packages for ISDN, V5.x, SS#7, GSM, GSM-R, GPRS, EDGE, UMTS, CDMAone, CDMA 2000, 1xEv-Do, HSxPA GR303, IMS net-works.

Includes: 15 LCD monitor PCM and Ethernet alarm monitor Auto configuration and scanner (providing a dynamic display of the

usage of every PCM timeslot) PDF format manual For all protocol decodes (requires at least one decode option):

Offline Analyzer Powerful call trace function, Multi interface call trace Comprehensive filters Reassembly on Abis and IuB interface Event counters Call data records Triggers Load analysis

Interfaces

Plug in cards

BT22629001 E1/T1 PCM 2 trunkseach plug in card includes4 BTK499 measuring cables for 120 systems(BTK499: 1 CF [m] to 1 LEMOSA [m], length 3 m)or4 BTS230 adapters, 75 , for BNC cables(BTS230: BNC [f ] to 1.6/5.6 [m])or4 BTK772 measuring cables for 120 systems(BTK772: 1 plug phone to 1 LEMOSA [m], length 3 m)

BT22629004 Gigabit Ethernet interface 2 Rx, electricaleach plug in card includes:2 BTK110 measuring cables for 10Base-T, 100Base-TX or 1000Base-T networks(BTK110: 1 RJ45 to 1 RJ45, CAT6, length 3 m)

BT22629006 Gigabit Ethernet interface 2 Rx, opticaleach plug in card includes2 BTK120 measuring cables for 1000Base-SX networks(BTK120: 1 LC Duplex to 1 SCDuplex, multimode, length 3 m)or2 BTK122 measuring cables for 1000Base-SX networks(BTK122: 1 SCDuplex to 1 SCDuplex, multimode, length 3 m)or2 BTK121 measuring cables for 1000Base-SX networks(BTK121: 1 MTRJDuplex to 1 SCDuplex, multi-mode, length 3 m)

BT22629011 STM-1/OC-3c 2 trunks 1310 nm, opticaloptical 1310 nm, single modeeach plug in card includes:4 BTK3110 measuring cables,(BTK3110: 1 SCDuplex to 1 SCDuplex, single mode, length 2 m)

BT22629012 STM-1/OC-3c 2 trunks 1550 nm, opticaloptical 1550 nm, single modeeach plug in card includes:4 BTK3110 measuring cables,(BTK3110: 1 SCDuplex to 1 SCDuplex, single mode, length 2 m)

BT22629017 E1/T1 PCM and ATM 4 trunkseach plug in card includes:8 BTK101(BTK101: 1x RJ45 [m] to Bantam [m], length 2 m)or 8 BTK102 (BTK102: 1x RJ45 [m] to Bantam [m], length 6 m)or 8 BTK103 (BTK103: 1x RJ45 [m] to 1 CF [m], length 2 m)or4 BTK104 + 4 BTB106 (BTK104: 1x RJ45 [m] to 2x RJ45 [m], length 2 m)(BTB106: Twin Balun 1x RJ45 [f ] to 2x BNC [m])

11Ordering information

8635 TELECOM PROTOCOL ANALYZER

Analyzer core software

BT22629350 Base SW for Protocol Analyzer 863x:Protocol viewerComprehensive filtersReassemblyPowerful call trace functionCall data recordsEvent counters and statisticsLoad analysisTriggerOperates only with additional decode packages, to be selected from the below.Protocol decodesFor detailed information refer to document 863x Protocol Decodes.

BT22629301 GSM decode packageAbis, A and MAP (includes CAMEL) interface protocol decoding of GSM 900/1800Includes O&M decode ETSI baseFull manufacturer specific O&M decoding and/or Abis PCU decoding additionally requires one of the follow-ing decode extensions:

BT22629302 Lucent decode packageBT22629303 Nokia decode packageBT22629304 Ericsson decode packageBT22629305 Siemens decode packageBT22629306 Alcatel decode packageBT22629307 Motorola decode package (Mobis)BT22629308 Huawei decode packageBT22629309 Nortel decode packageBT22629310 CS Core SS#7 decode package

Decodes all SS#7 protocols according to ITU-T: SIGTRAN, CAMEL, MTP, SCCP, ISUP, TUP, INAP (ITU-T Q.1218), with various national variants

BT22629311 GPRS decode packageGb, Gc, Gd, Gf, Gr, Gs, Gi, Gn, Gp interface protocol decoding, Abis decoding in combination with the manufacturer-specific Abis PCU decode package

BT22629312 Access ISDN/V.5 decode packageDecodes all V5.1, V5.2, ISDN PRI and GR303 TMC pro-tocols

BT22629316 HSL decode packageBT22629318 GSM-R decode package

Decoding of advanced speech call items (ASCI)Voice group call service (VGCS)Voice broadcast service (VBC)European Train Control System (ETCS)Enhanced multi-level precedence and preemption (EMCPP) requires GSM decode package BT22629301

BT22629321 Dynamic EDGE packageBT22629322 CDMA base package

Decodes A1, A2, A5, A8/A8; P-H, IS 41, ISUPBT22629323 CDMA2000 package

Decodes A10/A11, A3/A7 interfaces

BT22629325 WiMAX Decode packageR3, R4, R5, R6 based on 10/100/1000 Ethernet Interfaces

BT22629343 Payload decode packageDecodes FTP, HTTP, SMTP, WAP, DNS, DHCP, RADIUS, PPP... requires the GPRS BT22629311 decode package

BT22629345 Deciphering package (Gb&Iub)Supports on-line and off-line deciphering at Gb and Iub interface according to GEA1, GEA2.Requires GPRS decode package BT22629311 for Gb deciphering,Requires UMTS decode package BT22629373 for Iub deciphering.

BT22629346 NGN IP decode packageDecodes Megaco, BICC, RTP, RTCP, SIP, H.323

BT22629361 IMA application packageThis package enables Inverse Multiplexing over ATM Version 1.0 and 1.1, for 2, 3 or 4 E1/T1 links (IMA2, 3, 4)

BT22629373 UMTS decode packageFor protocol decoding at IuB, IuR, IuCS, IuPS interfaces

Additional software options

BT22629513 Recording-Scheduler softwareRecording tool that allows automated capture file generation.Various start, stop trigger conditions can be config-ured.

BT22629337 Off-line protocol analyzer softwareIntended for stand-alone use to analyze capture files.Software can be installed on any PC with WindowsXP operating system.For all protocol decodes (requires at least one decode option):Protocol viewerComprehensive filtersReassembly Powerful call trace functionCall data recordsEvent countersLoad analysisTriggerOperates only with additional decode packages, to be selected from the above.

GSM/GPRS troubleshooting software

BT22629341 RAN-Scout softwarePost processing software for troubleshooting, monitor-ing and optimization of GSM 900/1800/1900 and GPRS networks.

BT22629347 The KPI and 24x7 Surveillance Package enables the protocol analyzer family 863x to be used in 24x7 applications. This package comprises 3 main functions: Continuous message export, periodical KPI export, SNMP trap generation.

Test & Measurement Regional Sales

NORTH AMERICATEL: 1 866 228 3762FAX: +1 301 353 9216

LATIN AMERICATEL:+1 954 688 5660FAX:+1 954 345 4668

ASIA PACIFICTEL:+852 2892 0990FAX:+852 2892 0770

EMEATEL:+49 7121 86 2222FAX:+49 7121 86 1222

WEBSITE: www.jdsu.com

8635 TELECOM PROTOCOL ANALYZER

Product specifications and descriptions in this document subject to change without notice. 2009 JDS Uniphase Corporation 10143239.508.0609 8635.DS.CPO.

Cables & Accessories

BT22629003 Calibration report8635 calibration reportPrinted Manuals(Operating Manual: on-line help and PDF manuals are included)

BT22629827 Printed operating manual 8635English

BT22629826 Installation manual Getting StartedEnglish

BTS230 Cables for 75 Ohm systemsAdapter for 75 Ohm systemsBNC [f ] -- 1.6/5.6 [m]

BTK3110 Cables for STM-1/OC-3c interface single modeCable 1SCDuplex -- 1SCDuplex, length 3 m

BTK122 Cables for 1000Base-SX networks multimodeCable 1SCDuplex -- 1SCDuplex, length 3 m

BTK120 Cables for 1000Base-SX networks multimodeCable 1LCDuplex -- 1SCDuplex, length 3 m

BTK121 Cables for 1000Base-SX networks multimodeCable 1MTRJDuplex -- 1SCDuplex, length 3 m

BTK110 Cable 10Base-T, 100Base-TX or 1000Base-T net-works, CAT6RJ45 to RJ-45, length 3 m

BTK499 Cables for 120 Ohm systemsCable 1CF [m] 1 LEMOSA [m], length 3 m

BTK772 Cable 1PLUG PHONE1 LEMOSA [m], 3000 mm

BTK792 Cable 1RJ45 1RJ45, length 2 mBTK105 E1 Y-cable RJ-48,

2Lemosa 9 mm, length 2 mBTK103 Cable E1/T1

TF to RJ45, length 2 mBTK104 Cable E1/T1

RJ45 to 2 RJ-45BTK102 Cable E1/T1

Bantam to RJ45, length 6 mBTB106 Twin Balun for bidirectional signal conversionBTK101 Cable E1/T1

1x RJ45 [m] to Bantam [m], length 2 mBT22629005 Additional 8635 cover plate for empty slotsBT30359202 Soft caseBT09600008 Carrying case with rolls

Training courses

8635/8632/8631 workshopSignaling system SS#7V5.1/V5.2 protocol seminarGSM mobile radio communication systemGPRS - the mobile internetUMTS - the mobile communication system of the future

Please contact your local sales office for more information.

Software subscription

Yearly software subscription including regular software upgrades and updates for base software and decode packages.

Please contact your local sales office for more information.