commonwealth of australia gazette - · pdf filedouble reach and not less than 1 588 kg for...

Commonwealth of Australia Gazette

No. TC07/51, Wednesday, 19 December 2007 Published by the Commonwealth of Australia

TARIFF CONCESSIONS

CONTENTS TCO Applications ....................................................................................................... 2 TCO Applications Refused........................................................................................ 6 TCOs Made ................................................................................................................. 7 Local Manufacturer Initiated - TCO Revocation Requests .................................. 19 Local Manufacturer Initiated - TCOs Revoked ...................................................... 19 Customs Review of TCO Applications Notification.............................................. 20 AAT Review of TCO Applications Notification...................................................... 21 Section 273 Determinations Made.......................................................................... 22

The Australian Customs Service (Customs) publishes the Commonwealth of Australia Tariff Concessions Gazette (the Tariff Concessions Gazette) free of

charge on the Customs internet site at: http://www.customs.gov.au Interested parties should select “media, publications and forms”, then “tariff

concessions gazette”. The gazettes are listed in date order and may be selected from the list of Adobe Portable Document Format (PDF) files.

General Inquiries: ..............................................................(02) 6275 6404

Facsimile: ...........................................................................(02) 6275 6376

Cat. No. ISSN 0813-8389 ©Commonwealth of Australia, 2007

http://www.customs.gov.au/

2 TCO Applications

Commonwealth of Australia GazetteNo TC07/51, Wednesday, 19 Dec 2007

TCO Applications

CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269K(1) - APPLICATIONS MADE FOR TARIFF CONCESSION ORDERS

Applications have been lodged for Tariff Concession Orders for the goods described in the following TABLE.

Australian manufacturers who wish to contest the granting of a Tariff Concession Order for the goods described are invited to lodge a submission in writing in an approved form. Submissions must be lodged within 50 days of the date of publication of this Notice.

The operative date (Op.) and TC reference number follow the description of goods.

To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.

Submission forms are available from Custom Houses throughout Australia or on the Customs web site www.customs.gov.au.

For guidance on the required description style, phone 02 6275 6404, fax 02 6275 6376 or email [email protected].

THE TABLE

Description of Goods including the Schedule 4 Item Number Customs Tariff Classification General Rate

2917.39.00 CHLORTHAL DIMETHYL TECHNICAL Op. 03.12.07 - TC 0720598 Stated Use: Herbicide Applicant: NUFARM AUSTRALIA LIMITED

50

5%

3926.90.90 SHIELDS, RIOT, HAND CARRIED Op. 23.11.07 - TC 0720068 Stated Use: Used for protection for law enforcement personnel during violent situations Applicant: XTEK LIMITED

50

5%

5911.90.10 PARTS, FILTER PRESS, being woven textile articles having ALL of the following: (a) hook and loop taped edges; (b) circular holes with attached rubber gaskets; (c) locating holes Op. 23.11.07 - TC 0719915 Stated Use: Used in filter presses to encapsulate filter plates Applicant: JORD INTERNATIONAL PTY LIMITED

50

5%

6914.90.00 COOKERS, CERAMIC Op. 21.11.07 - TC 0720053 Stated Use: Used for BBQs, cooking, roasting, baking, smoking, etc Applicant: KAMADO COOKERS AUSTRALIA

50

5%

http://www.customs.gov.au/

mailto:[email protected]

3 TCO Applications



8414.59.90 FANS, JET, TUNNEL having ALL of the following: (a) maximum vertical dimension NOT less than 900 mm; (b) maximum motor rating NOT less than 30 kW; (c) thrust NOT less than 850 N Op. 22.11.07 - TC 0719768 Stated Use: For tunnel ventilation Applicant: UNITED GROUP INFRASTRUCTURE PTY LTD

50

5%

8414.59.90 FANS, AXIAL, TUNNEL VENTILATION, having ALL of the following: (a) direct drives; (b) flow rate NOT less than 65 cm3/s; (c) diameter NOT less than 1 800 mm Op. 29.11.07 - TC 0720375 Stated Use: For underground transport tunnel ventilation Applicant: UNITED GROUP INFRASTRUCTURE PTY LTD

50

5%

8424.81.00 SPRAYERS, RIDE-ON, having BOTH of the following: (a) spraying boom length NOT less than 12 m; (b) spray tank capacity NOT greater than 4 000 L Op. 26.11.07 - TC 0720079 Stated Use: Spraying of agricultural crops Applicant: S.R CARN & PARILLA PREMIUM POTATOES PTY LTD

50

5%

8438.50.00 MEAT PROCESSING MACHINES, whether or not including out feed conveyors AND/OR bone pre-breakers, comprising ALL of the following: (a) meat and/or bone and/or sinew separators; (b) pressing rams; (c) pressing chambers Op. 21.11.07 - TC 0719817 Stated Use: Used to harvest meat left on bones Applicant: FOOD PROCESSING EQUIPMENT PTY LTD

50

5%

8474.80.00 CONCRETE COATING MACHINES, STEEL PIPE Op. 30.11.07 - TC 0720374 Stated Use: The application of a layer of concrete to the external surface of steel pipe to prevent corrosion in subsea oil and gas operations Applicant: APC SOCOTHERM PTY LIMITED

50

5%

8477.59.00 SLEEVES 0R FORMERS, ADJUSTABLE CALIBRATING Op. 27.11.07 - TC 0719748 Stated Use: Forming thermoplastic pipes Applicant: VINIDEX PTY LIMITED

50

5%

4 TCO Applications



8477.90.00 PARTS, PLASTICS EXTRUSION LINE, being screen changers Op. 26.11.07 - TC 0720095 Stated Use: Parts used for changing screen filters in plastics extrusion lines Applicant: GEOFABRICS AUSTRALASIA PTY LTD

50

5%

8479.89.90 PUMPS, PRESSURE TRANSFER, DESALINATION PLANT Op. 20.11.07 - TC 0719751 Stated Use: Used in the process of water pressure transfer in desalination plants Applicant: JOHN HOLLAND PTY LTD & VEOLIA WATER AUSTRALIA PTY LTD

50

5%

8479.89.90 LENS MANUFACTURING AND/OR PROCESSING LINE, comprising ALL of the following: (a) grinders and/or generators; (b) polishers; (c) chillers; (d) blockers (e) engravers; (f) analysers Op. 26.11.07 - TC 0720092 Stated Use: Manufacture and/or processing of ophthalmic lenses Applicant: EYEBIZ LABORATORIES PTY LIMITED

50

5%

8479.90.00 PARTS, PRESSURE TRANSFER PUMPS, DESALINATION PLANT, being ANY of the following: (a) pressure cylinders; (b) check valves; (c) pressure sensors; (d) hydraulic proportioning vessels; (e) flow switching valves; (f) hydraulic power packs Op. 20.11.07 - TC 0719752 Stated Use: Parts for use in water pressure systems of desalination plants Applicant: JOHN HOLLAND PTY LTD & VEOLIA WATER AUSTRALIA PTY LTD

50

5%

8716.39.00 BLAST CONTAINMENT UNIT, TRAILER MOUNTED Op. 22.11.07 - TC 0719767 Stated Use: Used to contain and remove explosive threats from suspect baggage Applicant: BRISBANE AIRPORT CORPORATION PTY LIMITED

50

5%

5 TCO Applications



8903.99.10 WATERCRAFT, fibreglass, inboard or outboard propulsion, comprising ALL of the following: (a) length NOT less than 4.9 m and NOT greater than 9.14 m; (b) width NOT less than 1.98 m and NOT greater than 3.15 m; (c) height NOT less than 1.27 m and NOT greater than 3.68 m Op. 03.12.07 - TC 0720597 Stated Use: Used for water based leisure activities including skiing and fishing, and for general water transport Applicant: BLAKES MARINE PTY LIMITED

50

5%

9503.00.99 BALLS, PRINTED, depicting fictional characters AND/OR cartoon characters AND/OR action figures, having a circumference NOT greater than 121 cm Op. 19.11.07 - TC 0719789 Stated Use: Used as children's toys Applicant: HUNTER LEISURE PTY LTD

50

5%

6 TCO Applications Refused


TCO Applications Refused

CUSTOMS ACT 1901

NOTICE PURSUANT TO SECTION 269R(1) - APPLICATIONS FOR TARIFF CONCESSION ORDERS REFUSED

Applications for Tariff Concession Orders for the goods described in the following TABLE have been refused.

THE TABLE

Description of Goods including the Schedule 4 Item Number Customs Tariff Classification

8311.20.00 WIRE, WELDING, flux cored, C02 shielded Op. 29.06.07 - TC 0710243 Reason for refusal: Substitutable goods manufactured locally by The Lincoln Electric Company (Australia) Pty Ltd, Padstow, NSW, 2211

50

8427.10.00 REACH TRUCKS, SINGLE OR DOUBLE PANTOGRAPH REACH, rider standing platform, battery powered, complying with Australian Standard AS 2359, having ALL of the following: (a) load capacity NOT less than 1 450 kg for double reach and NOT less than 1 588 kg for single reach at a lift height NOT less than 5 780 mm; (b) maximum travel speed NOT less than 10 km/h; (c) maximum lift height NOT less than 6.05 m; (d) operator positioned within drivers compartment at right angles or facing the direction of travel; (e) AC traction motor; (f) power assisted steering; (g) overhead operator guard protector Op. 25.06.07 - TC 0709800 Reason for refusal: Substitutable goods manufactured locally by Crown Equipment Pty Ltd, Smithfield, NSW, 2164

50

7 TCOs Made Commonwealth of Australia GazetteNo TC07/51, Wednesday, 19 Dec 2007

TCOs Made

CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269R(1) - TARIFF CONCESSION ORDERS MADE

Tariff Concession Orders have been made for the goods described in the following TABLE.

The operative date (Op.) and TC reference No. follow the description of goods.

Local manufacturers of substitutable goods may request the revocation of TCOs at any time.

THE TABLE

Description of Goods including the Schedule 4 Item Number Customs Tariff Classification Last Date of Effect

3815.12.00 BRICKS, AUTOMOTIVE CATALYTIC Op. 04.10.07 Dec. date 14.12.07 - TC 0716686

50

3921.13.00 FILM, POLYURETHANE, heat sealable Op. 27.09.07 Dec. date 14.12.07 - TC 0713671

50

5608.19.90 COVERS, BALLOON, radar reflective, silver metallised nylon mesh Op. 04.10.07 Dec. date 14.12.07 - TC 0716880

50

5907.00.00 FABRICS, WINDOW FURNISHING, having ALL of the following: (a) 100% polyester base; (b) plain, dobby or hopsack weave; (c) aluminium coating on one side; (d) weight NOT exceeding 150 gsm Op. 05.10.07 Dec. date 14.12.07 - TC 0716883

50

7228.30.90 BARS, GROUSER, hot rolled alloy steel Op. 05.10.07 Dec. date 14.12.07 - TC 0716888

50

7317.00.90 STAPLES, COLLATED Op. 04.10.07 Dec. date 14.12.07 - TC 0716817

50

7323.99.00 SETS, CLEAN-UP, PET DROPPINGS, comprising pan and scraper Op. 05.10.07 Dec. date 14.12.07 - TC 0716882

50

7607.11.00 FOIL, ALUMINIUM, annealed, having BOTH of the following: (a) alloy A1235 or AW8079 complying with European Standard EN 573-3 and EN 573-4; (b) thickness NOT less than .006 mm and NOT greater than .0095 mm Op. 20.09.07 Dec. date 11.12.07 - TC 0715912

50

8302.10.00 HINGES, REFRIGERATOR AND/OR GRILLER AND/OR OVEN DOOR Op. 03.10.07 Dec. date 14.12.07 - TC 0716714

50



8302.30.00 PARTS AND ACCESSORIES, ON-ROAD TRUCKS, HAVING A GROSS VEHICLE WEIGHT NOT LESS THAN 7.5 TONNES, being ANY of the following: (a) arms; (b) bars; (c) bezels; (d) blocks; (e) braces; (f) brackets; (g) carriers; (h) catches; (i) clamps; (j) clips; (k) crossbars; (l) crossovers; (m) crossmembers; (n) fasteners; (o) fittings; (p) foot rests; (q) forks; (r) frames; (s) grips; (t) guards; (u) guides; (v) handles; (w) hangers; (x) hinges; (y) holders; (z) hooks; (aa) knobs; (ab) latches; (ac) levers; (ad) links; (ae) mountings; (af) plates; (ag) plugs; (ah) racks; (ai) rails; (aj) rings; (ak) rods; (al) runners; (am) shims; (an) spacers; (ao) strips; (ap) supports; (aq) ties; (ar) trays; (as) wedges; (at) weldments Op. 17.09.07 Dec. date 14.12.07 - TC 0715229

50

8412.29.00 HYDRAULIC OIL SYSTEM, HIGH PRESSURE, comprising ALL of the following: (a) fuel valves; (b) tanks; (c) pumps; (d) filters; (e) accumulators; (f) pipes Op. 08.10.07 Dec. date 14.12.07 - TC 0716976

50



8413.70.90 PUMPING SYSTEMS, CENTRIFUGAL, SKID MOUNTED, comprising ALL of the following: (a) main pumps; (b) auxiliary pumps; (c) emergency pumps; (d) jacking oil pumps; (e) reservoir tanks; (f) oil mist extractors; (g) temperature regulators; (h) pipes; (i) valves Op. 03.10.07 Dec. date 14.12.07 - TC 0716758

50

8414.59.90 FANS, centrifugal, 240 V AC, having ALL of the following: (a) forward curve impellers; (b) external rotor motors; (c) fan speed NOT less than 700 rpm Op. 28.09.07 Dec. date 14.12.07 - TC 0716533

50

8414.59.90 FANS, INDUSTRIAL, having BOTH of the following: (a) wheel diameter NOT less than 150 mm and NOT greater than 1 600 mm; (b) maximum total pressure NOT less than 900 pascals and NOT greater than 4 000 pascals Op. 03.10.07 Dec. date 14.12.07 - TC 0716757

50

8419.50.90 PARTS, ON-ROAD TRUCKS HAVING A GROSS VEHICLE WEIGHT NOT LESS THAN 7.5 TONNES, being ANY of the following: (a) coolers; (b) evaporators; (c) condensers Op. 19.09.07 Dec. date 10.12.07 - TC 0715403

50

8419.50.90 COOLERS, WATER TO OIL, having ALL of the following: (a) minimum oil flow NOT less than 40 litres per minute and maximum oil flow NOT greater than 610 litres pet minute; (b) minimum water flow rate NOT less than 8 litres per minute and maximum water flow rate NOT greater than 305 litres per minute; (c) copper nickel tubes Op. 04.10.07 Dec. date 14.12.07 - TC 0716832

50

8419.50.90 COOLERS, GENERATOR FIN-FAN, comprising ALL of the following: (a) water and glycol cooling media; (b) air inlets; (c) pump skids; (d) expansion tanks; (e) interconnecting pipes Op. 08.10.07 Dec. date 14.12.07 - TC 0716975

50



8419.81.90 ROASTERS AND/OR GRILLERS, electric, continuous contact conveyor belt, programmable logic controlled, comprising thermal oil heating, stainless steel platens, belt steam cleaner, whether or not including any of the following: (a) fixation spacers; (b) height adjusters; (c) pumps; (d) in feed heating plates; (e) fat collecting launders; (f) in feed conveyors; (g) transfer belts; (h) grease reducers; (i) air knives system; (j) hot water boxes; (k) exhaust systems; (l) spray balls; (m) belt welders; (n) valves; (o) suction filters; (p) ventilators; (q) sound insulators Op. 28.09.07 Dec. date 14.12.07 - TC 0716472

50

8419.89.90 STARCH COOKERS, sizing, paper and paper board Op. 05.10.07 Dec. date 14.12.07 - TC 0716887

50

8421.21.90 SOIL AND SAND SEPARATION PLANT, comprising ALL of the following: (a) de-sanders; (b) pumps; (c) clarifiers; (d) conveyors; (e) mixers; (f) tanks; (g) belt presses Op. 05.10.07 Dec. date 14.12.07 - TC 0716916

50

8421.39.00 AIR INTAKE SYSTEMS, GAS TURBINE, comprising ALL of the following: (a) inlet housings; (b) filters; (c) upper and lower plenums; (d) expansion joints; (e) compressor cleaners; (f) compressor dehumidifiers; (g) evaporative coolers; (h) stair and platform frames Op. 02.10.07 Dec. date 14.12.07 - TC 0716567

50

8428.90.00 BRIDGES, APRON DRIVE, TELESCOPIC, AIRCRAFT PASSENGER BOARDING, having ALL of the following: (a) rotunda; (b) glass walled telescopic tunnels; (c) hydraulic elevation; Op. 27.09.07 Dec. date 14.12.07 - TC 0716468

50

8431.49.90 PARTS, BUCKET LOADER, being arrowhead and half arrowhead wear edges Op. 05.10.07 Dec. date 14.12.07 - TC 0716889

50

8474.31.00 CEMENTER, skid mounted, having ALL of the following; (a) silos; (b) NOT less than two triplex pumps; (c) mixing capacity NOT less than 2,500 kilograms per minute; (d) densitomers; (e) diesel engines Op. 28.09.07 Dec. date 14.12.07 - TC 0716474

50



8479.89.90 PHARMACEUTICAL MANUFACTURING PROCESSING LINE, programmable logic controlled, comprising ALL of the following (a) fluid bed dryers; (b) coating machines; (c) high shear granulators; (d) conical wet mills; (e) fluidized bed processors; (f) wash water preparers; (g) dry granule handlers Op. 25.09.07 Dec. date 14.12.07 - TC 0716255

50

8483.60.90 PARTS, PLATE MILL, being couplings and coupling halves Op. 08.10.07 Dec. date 14.12.07 - TC 0716978

50

8502.31.90 GENERATORS AND DISTRIBUTORS, WIND POWERED, electric, having ALL the following: (a) AC/DC generators; (b) blades; (c) steel towers; (d) nacelles; (e) yaws; (f) hubs; (g) rotors; (h) sub-station switch gears; (i) cables; (j) foundation support rings; (k) controller and power modules; (l) lifts; (m) transformers Op. 02.10.07 Dec. date 14.12.07 - TC 0716568

50

8536.50.99 PARTS, ON-ROAD TRUCKS HAVING A GROSS VEHICLE WEIGHT NOT LESS THAN 7.5 TONNES, being EITHER of the following: (a) electrical switches; (b) actuators Op. 19.09.07 Dec. date 10.12.07 - TC 0715784

8705.30.00 VEHICLES, AIRPORT RESCUE AND FIRE FIGHTING (ARFF), having ALL of the following: (a) water tank capacity NOT less than 10 000 litres; (b) foam tank capacity NOT less than 1 500 litres; (c) roof turret with a water discharge rate NOT less than 2 000 litres per minute; (d) bumper turret with a water discharge rate NOT less than 1 000 litres per minute; (e) gross vehicle mass NOT less than 30 000kgs Op. 25.09.07 Dec. date 14.12.07 - TC 0716235

50



8708.29.99 PARTS AND ACCESSORIES, ON-ROAD TRUCKS HAVING A GROSS VEHICLE WEIGHT NOT LESS THAN 7.5 TONNES, being ANY of the following: (a) aprons; (b) angles; (c) armrests; (d) arms; (e) axles; (f) backings; (g) bars; (h) belts; (i) bezels; (j) bins; (k) boards; (l) body sides; (m) bonnets; (n) bosses; (o) bows; (p) boxes; (q) braces; (r) brackets; (s) buckles; (t) bugscreens; (u) bulkheads; (v) bumpers; (w) buttons; (x) cabs; (y) cantrails; (z) caps; (aa) cappings; (ab) channels; (ac) clamps; (ad) closets; (ae) collars; (af) compartments; (ag) consoles; (ah) control panels; (ai) coverings; (aj) covers; (ak) cowls; (al) crossmembers; (am) cup holders; (an) cups; (ao) curtains; (ap) dash; (aq) dashboards; (ar) deckplates; (as) deflectors; (at) desks; (au) doors; (av) ducts; (aw) ejectors; (ax) extensions; (ay) facings; (az) fascias; (ba) fenders; (bb) fillers; (bc) firewalls; (bd) flaps; (be) floorpans and boards; (bf) floors; (bg) frames; (bh) grilles; (bi) guards; (bj) guides; (bk) hangers; (bl) harnesses; (bm) headliners; (bn) holders; (bo) hoods; (bp) housings; (Continued on next page)

50



(Continued from previous page) (bq) inserts; (br) insulator panels; (bs) isolators; (bt) lappers; (bu) lifts; (bv) linings; (bw) louvers; (bx) lugs; (by) mats; (bz) mouldings; (ca) mountings; (cb) nets; (cc) overiders; (cd) pads; (ce) panels; (cf) pedals; (cg) pillars; (ch) plates; (ci) platforms; (cj) pockets; (ck) pivots; (cl) raceway; (cm) racks; (cn) rails; (co) rearwalls; (cp) regulators; (cq) reinforcements; (cr) rests; (cs) retainers; (ct) rods; (cu) roofs; (cv) runners; (cw) scoops; (cx) screens; (cy) sheets; (cz) shells; (da) shelves; (db) shields; (dc) shrouds; (dd) shutters; (de) sills; (df) skids; (dg) skirts; (dh) sleepers; (di) sockets; (dj) spacers; (dk) spoilers; (dl) stabilisers; (dm) stairs; (dn) steps; (do) stiffeners; (dp) stoppers; (dq) straps; (dr) strips; (ds) struts; (dt) sun roofs; (du) supports; (dv) tanks; (dw) tows; (dx) tracks; (dy) trays; (dz) trims; (ea) tubing; (eb) understructure; (ec) ventilators; (ed) vents; (ee) visors; (ef) walls; (eg) weldments; (eh) windows; (Continued on next page)



(Continued from previous page) (ei) wings Op. 19.09.07 Dec. date 10.12.07 - TC 0715785

8708.70.99 PARTS AND ACCESSORIES, ON-ROAD TRUCKS HAVING A GROSS VEHICLE WEIGHT NOT LESS THAN 7.5 TONNES, being ANY of the following: (a) bands; (b) brackets; (c) caps; (d) clamps; (e) clips; (f) covers; (g) discs; (h) drums; (i) flanges; (j) hubs; (k) keys; (l) plates; (m) rims; (n) rings; (o) spacers; (p) studs; (q) wedges; (r) wheels; (s) yokes Op. 19.09.07 Dec. date 14.12.07 - TC 0715402

50

8708.99.99 PARTS AND ACCESSORIES, ON-ROAD TRUCKS, HAVING A GROSS VEHICLE WEIGHT NOT LESS THAN 7.5 TONNES, being ANY of the following: (a) adaptors; (b) adjusters; (c) angles; (d) arms; (e) ashtrays; (f) axles; (g) baffles; (h) balls; (i) bands; (j) bars; (k) battery boxes; (l) beams; (m) bearings; (n) belts; (o) bezels; (p) blades; (q) blinds; (r) blocks and blockers; (s) boards; (t) bodysides; (u) bogies; (v) boots; (w) bowls; (x) boxes; (y) braces; (z) brackets; (aa) brakes; (ab) breathers; (ac) brushes; (ad) buckets; (ae) bug deflectors; (af) bug screens; (ag) bulkheads; (ah) bumpers; (ai) bumpstops; (aj) bushings; (ak) buttons; (al) cables; (am) cantrails; (an) cages; (Continued on next page)

50



(Continued from previous page) (ao) caps; (ap) carriers; (aq) cartridges; (ar) cases; (as) casings; (at) catches; (au) chambers; (av) changers; (aw) channels; (ax) chargers; (ay) chassis; (az) chuggers; (ba) circuit boards; (bb) clamps; (bc) clevis; (bd) clips; (be) clutches; (bf) coils; (bg) columns; (bh) condensers; (bi) cones; (bj) connectors; (bk) consoles; (bl) controls; (bm) converters; (bn) convexes; (bo) coolers; (bp) cores; (bq) couplings; (br) covers; (bs) cowls; (bt) cradles; (bu) crosses; (bv) crossmembers; (bw) crosstubes; (bx) cruise controllers; (by) curtains; (bz) cushions; (ca) CV joints; (cb) cylinders; (cc) dampers; (cd) deflectors; (ce) defrosters; (cf) differentials; (cg) dipsticks; (ch) discs; (ci) doors; (cj) dowels; (ck) driers; (cl) drip rails; (cm) drives; (cn) driveshafts; (co) drops; (cp) drums; (cq) ducts; (cr) ejectors; (cs) elbows; (ct) elements; (cu) endcaps; (cv) ends; (cw) engine mounts; (cx) equalisers; (cy) evaporators; (cz) expanders; (da) extensions; (db) facias; (dc) fenders; (dd) fillers; (de) final drives; (df) firewalls; (Continued on next page)



(Continued from previous page) (dg) fittings; (dh) flanges; (di) flaps; (dj) flares; (dk) forks; (dl) frames; (dm) gears; (dn) gladhands; (do) governors; (dp) grilles; (dq) grommets; (dr) guards; (ds) guides; (dt) gussets; (du) handles; (dv) hangers; (dw) hardlines; (dx) harnesses; (dy) headliners; (dz) hiders; (ea) hoods; (eb) hoses; (ec) housings; (ed) hubs; (ee) inlets; (ef) insulators; (eg) intakes; (eh) isolators; (ei) joints; (ej) journals; (ek) keepers; (el) keys; (em) knobs; (en) knuckles; (eo) kraftbands; (ep) lenses; (eq) levers; (er) lids; (es) lighters; (et) liners and linings; (eu) linkages; (ev) links; (ew) louvers; (ex) lubricators; (ey) manifolds; (ez) mats; (fa) members; (fb) modules; (fc) monitors; (fd) mouldings; (fe) mountings and mounts; (ff) mufflers; (fg) muffs; (fh) necks; (fi) nipples; (fj) nozzles; (fk) pads; (fl) panels; (fm) pedals; (fn) pinions; (fo) pins; (fp) pipes; (fq) pistons; (fr) pivots; (fs) plates; (ft) plugs; (fu) plungers; (fv) poppets; (fw) posts; (fx) power take-offs; (Continued on next page)



(Continued from previous page) (fy) presses; (fz) propshafts; (ga) quadrants; (gb) rackets; (gc) racks; (gd) rails; (ge) receptacles; (gf) rectifiers; (gg) reflectors; (gh) regulators; (gi) reinforcements; (gj) reservoirs; (gk) retainers; (gl) retarders; (gm) rims; (gn) rings; (go) rods; (gp) rollers; (gq) rotors; (gr) saddles; (gs) screens; (gt) sealers; (gu) senders; (gv) sensors; (gw) shackles; (gx) shades; (gy) shafts; (gz) shells; (ha) shields; (hb) shims; (hc) shock absorbers; (hd) shoes; (he) shrouds; (hf) side members; (hg) signals; (hh) sills; (hi) skins; (hj) skirts; (hk) slack adjusters; (hl) sleeves; (hm) sliding blocks; (hn) slingers; (ho) sockets; (hp) solenoids; (hq) spacers; (hr) spiders; (hs) spindles; (ht) splicers; (hu) sprockets; (hv) stabilisers; (hw) stacks; (hx) stators; (hy) steering mechanisms; (hz) steps; (ia) stops; (ib) straps; (ic) strips; (id) struts; (ie) studs; (if) subframes; (ig) sunvisors; (ih) supports; (ii) suspension; (ij) tanks; (ik) tapes; (il) T-beams; (im) tees; (in) terminals; (io) throttles; (ip) tie rods; (Continued on next page)



(Continued from previous page) (iq) ties; (ir) tips; (is) torque converters; (it) torque rods; (iu) tow bars; (iv) towers; (iw) tows; (ix) tracks; (iy) transfer case; (iz) transmission; (ja) trims; (jb) trunnions; (jc) tubes; (jd) turntables; (je) universal joints; (jf) ventilators; (jg) vents; (jh) visability windows; (ji) visors; (jj) weldments; (jk) wheels; (jl) worms; (jm) yokes Op. 17.09.07 Dec. date 14.12.07 - TC 0715410

19 Local Manufacturer Initiated - TCO Revocation Requests and Local Manufacturer Initiated - TCOs Revoked


Local Manufacturer Initiated - TCO Revocation Requests

CUSTOMS ACT 1901 - NOTIFICATION OF AN AUSTRALIAN INDUSTRY REVOCATION REQUEST - SECTION 269SC(1A)

Applications have been lodged for revocation of the Tariff Concession Orders set out in the following TABLE.

The Lodgement Request Date shown in the table below is the intended revocation date for the Tariff Concession Order which will take effect should the application for revocation be successful.

Importations not covered by in-transit provisions may be subject to post action as any decision to revoke an order is backdated to the date of request for revocation.

THE TABLE

Description of Goods including the Schedule 4 Item Number Customs Tariff Classification Lodgement Request Date

8207.13.00 PARTS, FOUNDATION DRILLING MACHINE, being ANY of the following: (a) welding bars; (b) quick change bars; (c) flat teeth; (d) weld on teeth; (e) round shank cutter bits; (f) mini bit shanks; (g) round shank bits Op. 27.06.07 Dec. date 07.09.07 - TC 0710022

50 12.12.07

8207.13.00 PARTS, ROAD HEADER AND TUNNELLING MACHINE, being EITHER of the following: (a) tungsten carbide picks; (b) scraper blades Op. 27.06.07 Dec. date 07.09.07 - TC 0710093

50 12.12.07

8207.19.00 PARTS, ROAD HEADER AND TUNNELLING MACHINE, being toolholders Op. 27.06.07 Dec. date 07.09.07 - TC 0710050

50 12.12.07

Local Manufacturer Initiated - TCOs Revoked

CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269SE(1) - AUSTRALIAN INDUSTRY INITIATED - TARIFF CONCESSION ORDERS REVOKED

The Tariff Concession Order for the goods described in the following TABLE has been revoked.

THE TABLE


4202.92.90 BAGS, LAPTOP AND/OR NOTEBOOK COMPUTER AND/OR MUSIC PLAYER, with or without shoulder straps Op. 03.08.07 Dec. date 12.10.07 - TC 0712495 Substitutable goods are manufactured in Australia by AdventureOne Pty Ltd, Sunshine West, Vic. In transit provisions apply.

50 21.10.07

20 Customs Review of TCO Applications Notification Commonwealth of Australia GazetteNo TC07/51, Wednesday, 19 Dec 2007

Customs Review of TCO Applications Notification

CUSTOMS ACT 1901 - NOTIFICATION OF REQUEST FOR REVIEW OF APPLICATION DECISIONS

A request has been received for review by Customs of the decision made on the application for the Tariff Concession Order for goods described in the following TABLE.

THE TABLE

Description of Goods including the Customs Tariff Classification

Schedule 4 Item Number Date of Lodgement of Request

Initial Decision

8201.60.00 SHEARS, two handed Op. 14.06.07 - TC 0709011

50 13.12.07

REFUSE

21 AAT Review of TCO Applications Notification Commonwealth of Australia GazetteNo TC07/51, Wednesday, 19 Dec 2007

AAT Review of TCO Applications Notification

NOTICE OF APPLICATIONS FOR REVIEW OF DECISIONS MADE UNDER PROVISIONS OF ADMINISTRATIVE APPEALS TRIBUNAL ACT 1975

Applications have been lodged with the Administrative Appeals Tribunal under section 29 of the Administrative Appeals Tribunal Act 1975 for a review of the decision of the Australian Customs Service in respect of the Tariff Concession Orders for the goods described in the following TABLE.

The operative date (Op.) and TC reference number follow the description of goods.

The decision to be reviewed by the Administrative Appeals Tribunal is as nominated following the description of goods.

Subject to the Administrative Appeals Tribunal Act 1975, any person whose interests are affected by the decision under review may apply in writing to the Tribunal to be made a party to the proceedings. Interested persons who do become a party to these proceedings may be able to present evidence and make submissions to the Tribunal and the matter may not be settled by consent without their agreement. The Administrative Appeals Tribunal reference number and location appear against the Tariff Concession.

THE TABLE

Description of Goods including the Customs Tariff Classification

Schedule 4 Item Number

8427.10.00 REACH TRUCKS, RETRACTABLE MAST, NARROW AISLE, rider seated, complying with Australian Standard 2359.7 (AS 2359.7), having ALL of the following: (a) load capacity NOT less than 1 300 kg and NOT greater than 2 100 kg at a 600 mm load centre; (b) wheelbase NOT less than 1 350 mm and NOT greater than 1 600 mm; (c) operator seated at right angles to the direction of travel; (d) battery powered Op. 05.12.06 - TC 0619386 Customs Decision: REFUSE

50

AAT Ref AAT Location

Applicant TOYOTA MATERIAL HANDLING (NSW) PTY LIMITED

S20075044 SYDNEY

Under ss.269SHA(3), an application by a person affected by the decision of the ACS in respect of this TCO may apply (under ss.30(1A) of the Administrative Appeals Tribunal Act 1975) to become a party joined to the proceedings within 60 days of publication of this notice or within such further period as the Tribunal allows

8427.10.00 FORKLIFTS, COUNTERBALANCED, as defined in Australian Standard 2359.7-1995, having ALL of the following: (a) load capacity exceeding 1 300 kg and NOT greater than 1 800 kg at a 600 mm load centre; (b) operator seat facing the forward direction of travel; (c) height with collapsed mast of NOT greater than 3 100 mm; (d) wheelbase NOT less than 1 250 mm and NOT greater than 1 600 mm; (e) battery powering Op. 20.12.06 - TC 0619995 Customs Decision: REFUSE

50

AAT Ref AAT Location

Applicant TOYOTA MATERIAL HANDLING (NSW) PTY LIMITED S20075045 SYDNEY

Under ss.269SHA(3), an application by a person affected by the decision of the ACS in respect of this TCO may apply (under ss.30(1A) of the Administrative Appeals Tribunal Act 1975) to become a party joined to the proceedings within 60 days of publication of this notice or within such further period as the Tribunal allows

22 Section 273 Determinations Made Commonwealth of Australia GazetteNo TC07/51, Wednesday, 19 Dec 2007

Section 273 Determinations Made

NOTICE OF DETERMINATIONS MADE UNDER PART XVI OF THE CUSTOMS ACT 1901

Under subsection 273B(2) of the Customs Act 1901, notice is hereby given of the making of determinations applying to goods of a kind specified in the table below.

In the table:

(i) the first column specifies the kind of goods to which the determination applies, any conditions specified in the determination, the commencement and cessation dates of the determination and the Determination reference number;

(ii) the second column specifies the item in Schedule 4 to the Customs Tariff Act 1995 that applies to the specified goods.

THE TABLE

Description of Goods Dates of Effect

Schedule 4 Item Number

Substructure and topsides for an offshore gas compression platform project 01.01.08 to 31.12.10 - AD 01001451

71

Ore crushing process line for a gold mine project. 09.03.07 to 08.03.09 - AD 01001452

71

Ore crushing process line for a gold mine project. 09.03.07 to 08.03.09 - AD 01001454

71

Grinding and beneficiation process line for a gold mine project. 09.03.07 to 08.03.09 - AD 01001455

71


71


71

Stackers and reclaimers for use in an iron ore project. 01.01.08 to 31.12.09 - AD 01001458

71

Two Ore Conveyor Systems for an iron ore project. 17.11.06 to 16.11.08 - AD 01001460

71

commonwealth of australia gazette - · pdf filedouble reach and not less than 1 588 kg for...

Documents