commonwealth gazette of australia - legislation

Commonwealth GaZetteof AustraliaNo. P 9, Friday, 22 April 1983Published by the Australian Government Publishing Service, Canberra

Customs Act 1901

Notice of Determinations under Part XVI

PERIODIC

The Minister of State for Industry and Commerce Senator, John N. Button, in pursuance of Section

2738(2) of the Customs Act 1901, notifies that Determinations have been made under Part XVI of that

Act, as appended in the Table hereto.

The Table specifies:-

(i) The Tariff item under which the application was considered;

(iI) The kind,. of goods to which the Determination applies and, where applicable, the

conditions specified in the Determination the commencing date of the Determination and the

By -law number

(ili) The item in Schedules 3 or

goods.

4 to the Customs Tariff Act 1982 as proposed to be

or

amended which

shall apply to the Where the item is shown in the form of 4 figures more it is an

item of Schedule 3 and where a 2 figure item Is shown it is an Item of Schedule 4.

All goods being machinery are, unless otherwise Indicated, subject to the provisions of Separate

Articles Directions given under paragraph (b) of sub - section (1) of Section 26 of the CustomsTariff.

Each of the Determinations, the making of which Is published in this notice, has been or fs being

Included as a reference in the departmental publication "Consolidated By -law References" and, while

any such reference remains current, goods conforming to the description therein may be

concessionally entered accordingly without prior application.

Copies of the Consolidated By -law References may be inspected at, or purchased from, the Department

of Industry and Commerce.

Manufacturers who consider that they

Department,

manufacture goods suitably equivalent to the goods describedin the Table may apply to the quoting the relevant file number, for consideration of

revocation of the Determination.

24541 %83 Cat. No. 83 55702 Recommended retail price $2.80 (plus postage)

2 Consolidated By -law References (Part l)Commonwealth of Australia Gazette

No. P 9. 22 April 1983

TariffReference

Column 1

05.03

17.02

1 7.02

20.07

21.07

21.07

29.07

29.35

34.02

34.02

35.06

35.06

37.01

37.03

38.11

38.19

38.19

38.19

39.01

Description of Goods

Column 2

Item andValidity Date

Column 3

Hair horse or cattle tail, double drawn, suitable for use in themanufacture of brushware(Op. 11.3.82 - Det. date 25.1.82 - BL 8251869)Dextrose, for use in the manufacture of intravenousunder security(Op. 20.10.81 - Det. date 25.1.83 - BL 8255296)Lactosepharmaceutical

anulfe being an absorbtion media for thefincrurés(Op. 10.11.80 - Det. date 25.1.83 - BL 8062432)Acerola j uice, whether or not dried(Cp. 25.1.83 - BL 8252352)

Di fco Bacto yeast extract, for useunder security(Op. 11.1.82 - Det. date 25.1.83 -Difco Bacto yeast extract, for useunder security(Op. 11.1.82 - Det. date 1.3.83 - BL 8330537)4- Chloro -3, 5- xylenol, for use in the manufacture of pharmaceuticalpreparations, under security(Cp. 1.1.83 - Det. date 18.1.83 - BL 8330202)Prazi quante I(Op. 30.7.82 - Det. date 25.1.83 - BL 8254067)Fluorosurfactant 78 -220

for(being a mixture of per f I uoroal kyl non ionic

surfactants), formulated use in the manufacture of firefightingfoam compounds(Op. 21.5.82 - Det. date 25.1.83 - BL 82 54864)Methyl(Op.

naphthalene sulphonic acid (sodium salt 98% minimum)1.1.81 - Det. date 1.2.83 - BL 8150857)

Adhesives formulated for use with stoma appliances orhuman

prostheticdevices, designed for implantation in or on the body(Co. 3.2.81 - Det. date 15.2.83 - BL 8158687)Anaerobic adhesives and sealants, single solution polymerising type,designed to cure only in

8330206)the absence of air

(Op. 15.2.83 - BLFilm, survey, !inagraph drift, designed for useinstruments(Op. 15.3.82 - Det. date 25.1.83 - BL 82 51 772)Printing plates, sheets or rolls, designed for use with printing machinesto(Cp.

which 84.35 aoplies25.1.83 - BL 8256179)

Bentazone(Op. 23.10.81 - Det. date 1.2.83 - BL 8160104)'Ankermix' magnesite ramming mix for repairingsteelmaking operations(Op. 7.9.8T Det date 1.3.83 - BI 8158844)Copper plating kits formulated for use by printed circuit fabricators(Op. 25.1.83 - BL 82'55 903)

"Lavaflame ", powder, as used in25.1.83

the repair of coke ovens(Op. 5.7.82 - Det. date - BL 8254666)

Silicone polymer in powder form for use in the fabrication of micasheets of the type used in electric heater elements, under security(Op. 10.8.81 Det. date 25.1.83 - BL 81 58040)

solutions,

absorbtion of

in the manufacture of vaccines,

BL 8252548)

In the manufacture of vaccines,

with oorehole survey

refractories used in

39.01 Isocyanate function compounds,acid diethylene

being an adduct of aa

polyester polyolfsocyanateof the

(Op.adipic

-glycol type with

8253219)di-

4.6.82 Det. date 25.1.83 - BL

39.01 Wiper200 mm

seals micro cellular polyurethane foam, having a width ofto

to540 mm (both inclusive), AND with a min length of 23

storagem,

designed prevent fume pollution in bulk petroleumtanks(Op. 25.3.82 - Det. date 1.3.83 - BL 82 53531)

19

1930.6.83

1930.6.83

19

19

19

30.6.8319

19

19

19

19

19

19

19

19

19

19

19

1930.6.83

19

19

Commonwealth of Australia GavetteNo. P 9, 22 April 1983 Consolidated By -law References (Part U 3

TariffReference

Column 1

39.02

39.02

39.02


Column 2


Column 3

Tape, adhesive coated on both sides, designed for the mounting ofstereos or printing blocks in the printing industry(Op. 19.10.82 - Det. date 1.3.83 - BL 8255616)

Thermoplastic hydraulic testhose having an internal dia not exceeding4 mn and a min test pressure of 49 MPA, but NOT including hose importedwith fittings attached(Op. 18.8.8T - Det. date 15.2.83 - BL 8158331)Polypropylene planar forms, b 'axial Iy oriented, either transparentor aluminium metallised, designed for use as the dielectric in themanufacture of electrical capacitors, unprinted thickness notgreater than 0.018 mm and width not exceeding 400 mm, manufacturedby Steiner Camvac, Honshu, Bol lore (Safidiep), Kalle, GeneralElectric, AB Rifa Tervakoskit Metal vuote Films, Shinetsu FilmCompany, to ANY of the following specifications:

ASEA KM 4001E;RIFARIFA

MP 1422;MP 1454;

RIFA PYA 9300 SERIES;PLESSEY RMS 184

(Op. 6.6.82 - Det. date 25.1.83 - BL 82 55456)

19

19

19

39.02 Polystyrene planar forms, having a thickness notRIFA specification

greater than 0.040 mm 19and a width not exceeding 24 ,mm to MP 1416(Op. 1.2.83 - BL 8253852

39.07 Bottles,(Op.

roller tissue culture 1927.7. 82 - Diet. date 25.1.83 - BL 81 58222 )

39.07 Erasers, ink, solvent impregnated, NOT being combined ink /pencil 19erasers(Op. 17.6.82 - Det. date 1.3.83 - BL 8052765)

39.07 Power transmission belts or belting having mouldedbut

teeth orNOT

notches 19running transversely across the inner surface, includingbatten belts

-or belting

date(Op. 1.1.83 Det. 1.3.83 - BLor

8256793)

40.02 Synthetic rubber to which 40.02.92 40.02.99 otherwise applies 40.02.91(Op. 1.1.83 - Det. date 25.1.83 - BL 8330077) 31.12.83

40.08 Extrusions, sponge rubber 12.7 mm x 9.766 mm having a 4.064 mm dia. 19centre hole, to specificatin SAEJ18 -SCE43 BDKZ(Op. 1.9.82 - Det. date 1.3.83 - BL 8330358)

40.08 Foam rubber, spun rayon backed or board-O-

backed, designed for use in the 19manufacture of foam insoles or "Ball Foot" protective cushions(Op. 1.2.83 - BL 82561 72

40.09 Hose to specification SAE J14020 type E or type F, but NOT including 19hose imported with fittings attached(Op. 2.7.82 - Det. date 15.2.83 - BL 8060912)

40.09 Hydraulicfittings

hose spiralto

laid (but NOT including hosespecifications:

imported with 19attached,, the following

Aeroquip CH 506;S.A.E. J517C 10085;S.A.E. J517C 100R9 but not including sizes 4.8 mm to 31.8 mm I.D.;S.A.E. J517C 10CR9 /R;S.A.E. J517C 100R10; orS.A.E. J517C IOCR11

(Op. 15.2.83 - BL 82 56660 )

40.09 Hydraulicficationattached

hose, multi - spiral wire reinforced to Dunlop specs- 19R9R, but NOT including hose imported with fittings

(Op. 1.12.82 - Det. date 15.2.83 - BL 8159703)40.09 Automotive air conditioner hose to specification SAE J51B Type A or 19

Type B,(13/32

but NOT including hose having an internal dia of 10.3 mmin) or hose Imported with connections and fittings attached

(Op. 18.8.82 - Det. date 25.1.82 - BL 8256111)40.10 Conveyor belts, designed for use with sheet steel niters 19

(0p.1.9.82 - Det. date 1.3.83 - BL 8050793)40.10 Conveyor belts, designed for use

- BLwith sheet steel pliers 19

(0p.1.9.82 - Det. date 1.3.83 8050793)

)

4 Consolidated By -law References (Part 11

Commonwealth of Australia Gu :etteNo. P 9. 22 April 1983

TariffReference

Column 1


Column 2

Item andVal ldlty Date

Column 3

40.10 Transmission belts, designedfol lows:

International Har vesterPart No :176577C1178019C11 79007C 118261901182945C1

for use with agricultural machinery, as 19

Co:

16651K 62982CR 1 5551 18R 1401128'22 59331 7R1 560431R 1M3281 3 595756R 1 562655R 1

41 9028'2 2 59773821 5644 94R 2

50430C 1 607344R 565565R 118304901 410644R 92 610521R 1 58962281184796C 1 50670C1 61192581 589623R 1

8650902 52586C1 611 93CR 1 591878218741 5C 1 53359C1 611932R2 592128R18741 5C2 640067,1

64999C9263372322 66360921

91 288C2 633726R2 1418731R191290C 68665C2 6563492 141 92332191291C 68678C1 6571 85R 803296R 191305C 76565C1

76567C166348CR674620R

41 92322192360C 41 710812195143C 76576C1 752424R 31403C197412C 4734688 2 753603R 96371C197416C 55095CR 1 823091C 97411C197480C 552747R 2 925725M 97413C1

201092C 55751 4M2 9362292 97414C1210185C 559808M1 9379288 214522C113988K 561 80042 9379322 390461R 215166K 10352F 3172404813968308 1 57669C1 and C2 5530792

Massey Ferguson:

195433M1 545000M1 936291 M 1 924769M22 72 71 6012 54565 1M1 272792041 925216MI2826795M1 545654M1 924359M i 925726M12 82 71 604 91 545655141 556779491 92773541282 7363M 1 550596M1 2745535M1 933031M2282736242 3287276M1 55729241 93313541283 5234M 1 32872 77M 1 557784M 1 933245M 12835857M1 94845741 560667M1 933505M12835858M1 934753M1 92363941 93 891 2M 1

i

Commonwealth of Australia GazetteNo. P 9, ?2 April 1983 Consolidated By -law References (Part I) 5

TariffReference

Column 1

Description of GoodsColumn 2


3Column

Massey Ferguson: continuedPart No :2837791M1283913CM13053289413053556413055094M131 80833413180869401

Sperry New Holland:Part No :230043230056230060309364333958

Class West Germany:Part No :050043.0050090.0060306.1061253.1061351.0094046.1133319.0133523.0145265.0146890.0500863.0509010.0501925.0509206.0503930.0653064.0653120.0654013.0654534.0655408.0656028.0672353.0672358.0672359.1673601.0673638.1673639.1673690.1685693.0687046.0

(Cp. 30.7.82 Det.

92 4358M1923505M19271 37M1926785419351 33M19363 76M 1927210M1

230077230078230080230070356025

505143.1506023.0506671.15072 78.0509435.014721 7.0532011.1573443.0603017.3603122.0603317.0603336.0603337.0603341.0603387.0603380.06891 75.0702509.0703314.0706087.0706829.0712386.0712419.1713506.172 0695.0720696.0721 295.0721306.0721307.0722107.0750288.0

date 1.3.83

92 3640M 192380312923971 M2924327101924329419246234192 4698M 2

942601M194482341944824M1529964M1

354115 247782336784 254093337415 261000362500261001

610197.0610830.0

630043.0630043.1

610833.0 630118.0621903.0 630144.0623252.0 630156.0623427.0 630169.0629036.0 631904.0629081.1 633030.1629214.1 633564.0629402.0 634019.1629410.0 635494.0629441.0 636021.0629732.1 636021.1629836.0 640653.0630025.0 653059.0750316.0 774100.0752094.0 778717.0

779213.0755070.1756059.0 779214.0758662.0 779272.0

780419.0658853.0758854.0 783268.1767057.1 783430.1769202.1 800309.0770214.0 801221.0

801222.0772646.0772647.1772657.1

977505.1977506.1

773313.0774099.0

- BL 8330342)

40.10 Transmission belts, endless, polyester or aramld fibre flex bonded+ensile7000, 8000

members designed for automotive use, Gates series 6000,or 9000

(Op. 8.3.82 - Det. date 1.3.83 - BL 82 53725)40.10 V belts, designed for use with Mott Hammer Knife

82 56278)

Flail mowers,part number 100706(Op. 24.11.82 - Det. date 1.3.83 - BL

19

19

-

Commonwealth of Australia Gavette6 Consolidated By -law References (Part!) ,Vo. P 9. 22 Apri! 1983

TariffReference

Column 1

ItemValidity

andDescription of Goods Date

Column 3Column 2

40.11 Aircraft tyres, but NOT including ANY of the following: 19

Size Ply Tube Type Tread MaxRating

T /LeSpeed(MRI)

400 -4 8 PR TT III TWIN CONTRACT 120TO

MPH120T/L VI REINFORCED RIB SPECIFICATION450x190 -5 1006

pPR

7ÓÓX201 /2 8 PR T/L IIIIN CONTACT 168

MPH725x7 3/4 8 PR TT I I RIB 166200 MR-I

MR-I750x14 10 PR T/L I RIB 160750x230 -15 14 PR T/L V REINFORCED RIB TO T20 SPECIFICATION800-6 8 PR TT RIB 120 MPH850x10 6 PR TT RIB 120 MPH850x10 8 PR TT RIB 120 MPH

MPH850x10 8 PR T/L RIB 12032x10.75x14 12 PR T/L RIB 160 MPH11.00x12 8 PR T/L RIB 120 MPH11.00x12 10 PR T/L RIB 120 MPH12.50x16 12 PR TT RIB 160 MPH13.50x16 24 PR T/L RIB 160 MPH1 7.00x1 6 12 PR TT RIB 160 MPH24.5x8.5 10 PR T/L VI RIB

RIB(CHINE)(CHINE)

200 MPH26x6.6 8 PR TA. V 200 MPH26x650 x14 10 PR TT I RIB 160 MR-128x7.7 14 PR T/L V RIB 200 MPH28x900x12 8 PR T/L I RIB 160 MPH32x11.50x15 12 PR T/L V I RIB (CHINE) 210 MPHH37x14 -15 22 PR T/1_ N.S. RIB 225 MR-I

MPH34x10.75x16 10 PR T/L III RIB 16040x14 16 PR T/L VII RIB 210 MPH40x14 14 PR T/L VII RIB

RIB200 MPH

40x14 24 PR T/L VII 200 MR-I40x14 28 PR T/L VII RIB 200 MPH42x15 22 PR T/L VII RIB 200 MPH42x15 24 PR T/L VII RIB

RIB210 MPH

46x16 28 PR T/L VII 210 MPH49x17 30 PR T/L VII RI8 225 MPH49x17 32 PR T/L VII RIB 225 MR-I43x12.50x21 16 PR TT III RIB 160 MPH50x20.0 -20 24 PR T/L VIII RIB 200 MPH50x20.0x20 26 PR T/L VII RIB 200 MPHH46x18.0 -20 26 PR T/L N.S. RIB 225 MR-I50x21.0 -20 30 PR T/L VIII RIB 210 MPH

MPH20.00x20 26 PR T/L III RIB 200(Op. 22.2.83 - BL 8253 925 )

40.13 Gloves,(Op. 3.6.82

soccer goal - keepers faced with foam rubber front and back 19- Det. date 15.2.83 - BL 8253163)

40.14 Elements, being partDet.

of a "Vulkan" flexible coupling or part of a 19"Fenaflex" coup lingg(Op. 14.12.82 - date 15.2.83 - BL 82 56771)

47.01 Chemical softwood pulp (other than refiner ground wood pulp), being 47.01.11goods to which 47.01.19 otherwise applies 31.12.83(Op 1.1.83 - Det. date 1.2.83 - BL 8330092)

47.01 Unbleached sulphate kraft softwood pulp (other than refiner ground 47.01 .1 1wood pulp) being goods to which 47.01.19 otherwise applies 31.12.83(Op. 1.1.83 - Det. date 1.2.83 - BL 83 30093 1

48.01 S'hankboard as used in footwear- manufacture 19(Op. 1.3.6 - Det. date 25.1.83 - BL 8251112)

48.07 Transfer paper coated with fluorescent material designed for use Inbanking stationary

19

(Op. 3.5.82 - Det. date 1.3.83 - BL 8330552)48.07 Transfer paper coated with fluorescence, designed for use In banking

stationery3.5.82 - Det. date 25.1.83 - BL 7961227)

19

ss

6I

p

Commonwealth of Australia GazetteVo. P 9, 22 April 1983 Consolidated By -law References (Part 1) 7

TariffReference

Column 1

48.07


Column 2


Column 3

Paper and paperboard described in column 1 of the Table hereunderhaving a Customs value not less than the amount specified in column2 of that Table opposite those goods

THE TABLE

Column 1

(Description of Goods)

TariffClass-ification

Goods

Column 2(MinimumCustoms Value

48.07.648.07.7

Paper and paperboard, printed or embossedand

S1370/twith words, letters or figures,

48.07.9 by reason of such printing orembossing, recognisable as suitablefor use as a wrapping medium or Inthe covering of containers of goods(Op. 1.1.83 - Det. date 15.2.83 - BL 8330600)

48.07.7 Fancy papers, coated, not exceeding 50.062205 g/m' having printed or embosseddesigns thereon, but not includingANY papers that are:(a) waxed or gummed; or(b) coated in any manner on the

reverse side thereof; or(c) have a wood rain design

(Op. 1.1.83 - Det. date 15.2.83 - BL 8330728)

48.07 Printing paper, heat sensitive, grammage between 55 g/m2 and 60 g/m2, 19width exceeding 400 mm(Op. 1.11.81 - Det. date 25.1.83 - BL 8251892)

48.07 Transfer paper coated with fluorescent material designed for use in 19banking stationary(Op. 3.5.82 - Det. date 1.3.83 - BL 8330552)

48.15 Diagnostic reagent papers as follows:type:

19(a) "Oxide" or "Becton Dickinson"

Anaerobic indicator strips;An -I dent discs;Bacitracin discs;Factor discs;Multodiscs;OptochIn discs;Senitivity discs;pore strips

(b) "M S types:"Adapad";Bacterur i test;Baciltracin discs;Diagnostic rings (Mastring -S);Methicillin strips;M.I.C. Method;Cptichin discs;Se1ectac (rolesSensitivity discs;Stearo Thermophilus spore strips;X and V factor discs

(Op. 17.1.83 - Det. date 1.3.83 - BL 8330557)

48.15 "Durolin" edge ipppinggs types Linodur, Lino lex, Lino1ac or Linop1an 19(Op. 16.10.81

_I

De}. da4e 25.1.83 - BL 8160375)

48.15 White graphite paper, 34.9 GSM, coated with polyvinyl acetate 19resin as used in syringe manufacture(Op. 1.2.82 - Det. date 25.1.83 - BL 8050685)

48.21 Chart rolls designed for use with deflectograph recorders 19(Op. 1.10.81 - Det. date 25.1.83 - BL 82511(3)

48.21 Chart rolls, wax coated, designed for use with railway speed 19indicating and recording instruments(Op. 30.11.81 - Det. date 25.1.83 - BL 8160984)

m2

19

-

Commonwealth of .4ustraiia Gazette8 Consolidated By -law References (Part I) No. P 9, 22 April 1983

TariffReference

Column 1

48.21


Column 2


Column 3

Indicator strips, non bleeding "Merck Special", "Universal", "Acilit ","Neutral it ", "Al kalit" cr "Merckoquant ", being indicator stripscontaining dyestuffs covalently bound to the cellulose of the reagentpaper(Op. 9.1.81 - Det. date 25.1.83 - BL 8150833)

19

48.21 Sheeting or strip in rolls suitable for use in the manufacture of 19perforated pattern cards or endless pattern rolls, as used In theoperation 4f

-jacquard or dobby_ machines

(Op. 1.9.81 De.. date 25.1.83 - BL 8058747)51.02 Fibre, PTFE, graphite impregnated, suitable for use in compression 19

packing for pumps or valves(Cp. 1.1.82 - Det. date 25.1.83 - BL 8251726)

51.02 ' Rilsan' type 11 (eleven) polyamide monofilament yarn, acid 19resistant designed for weaving into filter fabric(Op. 3.6.82 Det. date 1.3.83 - BL 6253464)

56.07 Woven fabric containing 65% polyester and 35% cotton for use as 19interlining in the manufacture of shirt col8063308)

lars, under security(Cp. 12.5.81 - Det. date 15.2.83 -

selvedged

BL

58.05 "Vidatape S ", shrink tape edge, of woven polyester yarn 19(Op. 1.3.82 - Det. date 25.1.83 - BL 7959843)

59.03 Bonded fibre fabric, impregnated, suitable for use in clothes dryers 19as a softener(Op.

"Orsol"1.3.82 - Det. date 25.1.83 - BL 8161310)

59.03 or "Biagioli" non woven bonded fibre sheets, used as insol ing 19material in the manufacture of footwear(Cp. 14.8.82 - Det. date 25.1.83

rope15.2.83

- BL 8255916)59.04 Nylon Filament wool blend 19

(Op. 22.9.81 - Det. date - BL 8160042)

59.04 Braid on braid rope, nylon construction, dia 168 mm or greater, 19min breaking load exceeding 550 t(Op. 9.6.81 - Det. date 25.1.83 - BL 8156228)

59.04 Braid on braid rope, polyester construction, being endless rope 19snotters formed by an end for end splice, dia 96 mm or greater, minbreaking load exceeding 200 t(Op. 9.6.81 - Det. date 25.1.83 - BL 8255977)

59.11 Nylon or cotton narrow woven fabric, coated with self adhesive rubber 19compounds, width not exceeding 25.4m, designed for the seamreinforcement of footwear(Oo. 1.3.82 - Det. date 1.3.83 - BL 8251505)

59.12 Fabrics, coated, for use in the manufacture of domestic ironing board 19covers under security(Op. 2.12.81 - Det. date 25.1.83 - BL 8058124)

59.12 Narrow woven fabrics, nylonwidth not

or cot +on, coated25.4mm,

with self adhesvie 19rubber compounds, exceeding designed for seamreinforcement of footwear(Op. 1.3.82 - Det. date 1.3.83 - BL 6255835)

59.16 Drive belts, endless, Serco Ultrabelt, designed for variable speed 19drive(Op.

on paper corrugators1.12.81 - Det. date 25.1.83 - BL 81576%)

59.16 Polyester belting (1008 polyester), having a thickness of 14 mm 19or greater'1.5.81

suitable for use with dropBL

hammers(Op. - Det. date 25.1.83 - 8157763)

59.16 Woven, endless, cotton belting, having a width of 81 an or more 19designed to be used with rotary machines in the baking industry(Op. 1.3.83 - BL 8330734)

59.17 Bands or sleeves, interlock woven felt designed to be used on 19sanmying machines in the tanning industry(Op. 2.8.82 - Det. date 22.2.83 - BL 8060251)

59.17 Fabrics having a width of 9 m or more, designed for use on paper, 19making machines(Op. 22.2.83 - BL 8330359)

59.17 Gaskets, man -made fibre, tubular22.2.83

needle felt8058159)

19(Op. 8.7.82 - Det. date - BL

.

Commonwealth of Australia GazetteNo. p 9. 22 April 1983 Consolidated By -law References (Parr Il 9

TariffReference

Column 1

61.01


Column 2

I +em andValidity Date

Column 3

"Sandvik" or Spacetime" loggers' denim safety trousers(Op. 25.1.83 - BL 8253864)

61.03 Bullet proof body armour(Op. 27.9.82 - Det. date 25.1.83 - BL 8255643)

61.04 Bullet proof body armour(Op. 27.9.82 - Det. date 25.1.82 - BL 8255642)

68.07 Goods made from ceramic fibre, as follows:(a) Braid being ceramic fibre braided with ceramic fibre material

NOTCloth;

fibre glass material;(b)(c) Paper having a thickness of 3.5 mm or less;(d) Rope; or(e) Tape

(Op. 16.11.82 - Det. date 22.2.83 - BL 8330283)68.07 Pyrothem 83 board as per drawing nos BI- 218140 -PE, BI- 218129 -PE being

linings for basins and basin drains used to carry molten aluminium(Op. 24.2.81 - Det. date 25.1.83 - BL 8250876)

68.07 "Solve" porous ceramicDet.

filtration media(Op. 1.10.81 - date 25.1.83 - BL 8158979)

68.13 Woven wire inserted asbestos cloth manufactured by Raymark Industriesto mill spec no 882L and designed

-for use In clutch facings

(Op. 1.1.82 - Det. date 22.2.83 BL 8252900)

Brake pads designed for use In a-coalBL

conveyor68.14

68.16

(Op. 2 .6.42 - Det. date 22.2.83 825349 )

Permeable element assemblies, designed for the injoctin of inertgases through the bottom

dateof basic oxygen

BL 8330078)steelmaking furnacesipp. 15.1.82 - Det. 1.3.83 -

69.02 Insulating fire bricks, Borgestad 0.7, 26 and 28 having a max.recommended temperature of

date1400°C

-orBL

higher8254852)(Op. 16.9.82 - Det. 1.3.83

69.02 Insulating fire bricks type M -20 having an average density(ASTM C 437 -61 refers) of 29 Ib

22.2.83lb/cu ft

(Op. 1.6.82 - Det. date - BL 8330089)69.02 Refractory bricks or shapes containing not more than 0.5% total of

alumina titania and alkali Orton cone 32 min(Op. 1.11.82 - Det. date 1.5.83 - BL 8255220)

69.02 Silica refractory bricks type Q-Rex as manufacturedRefractories Co Ltd Japan(Op. 20.5.82 - Cet. date 1.3.83 - BL 82529411

69.03 Stoppers, fired clay graphite, designed to regulatemetal during casting operations(Op. 1.6.82 - Dot. date 25.1.83 - BL 8058071)

69.03 Stoppers "Rotolok"(Op. 12.8.82 - Det. date 25.1.83 - BL 8060474)

70.06 Glass X -ray protective(Op. 7.5.75 - Det. date 1.3.83 - BL 83308651

by Kyusliu

the flow of liquid

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

IO Consolidated By-law References (Part I)Commonwealth of Australia Gazette

;Vo. P 9, 22 April 1983

TariffReference

Column 1

70.17

70.20

70.20



Column 3

Laboratory glassware, hygenic or pharmaceutical other than: 19adaptorsapparatus, gas analysisbottles - dreschel , gas sampling or washingcells (cuvettes)Chemistry setsChromatographic columns and fittings thereforcondenserscylinders- nessler, separatingdiIutorsdispensers - kipps, tilt, mediaextraction apparatusflesks-dewar, kjeldahl, maJonnier, rotary evaporative, vacuum, boilingfunnels dropping, power, separatinggauges, rainmeasures-ki ppsmicroscope cover slfpspipettes -ESR or pasteurpumpsscoops,

splittingweighing

separators, modecular Jetsystems

splash headsstills- mercury, solvent, waterstirring rodsstopcockssyringes, chranatograpphictubes - centrifuge, canbustion, test, gas sampling or gas filtering,

drying(Op. 22.2.83 - BL 8330602)Glass fibre fabric, coated with polytetrafluoroethylene, not 19exceeding 950 g/m

- Det.(Op. 18.10.82 date 1.3.83 - BL 8330324)

Fibreglass needlefelt filter media, designed for the filtration of 19high temperature gases(Op. 15.9.82 - Det. date 1.3.83 - BL 8254877)

70.20 Fibreglass yarn, continuous filament to be coated with a polyvinylchloride based

-compound, under security

(Op. 1.1.83 Det. date 1.3.83 - BL 8052780)73.10 Flot

(Op.rolled bars, 29.5 an 33

1.3.83mm, 33.5 mm or 36.5 mm square2.8.82 - Det. date - BL 8256006)

73.11 Tees, black, but NOT Including tees in -the lowing sizes:38.1 m x 38.1 mm x 4.76 mm50.876.2

mm x 50.8 mm xx

6.359.52

mmmmmm x

mm x76.2 mm

101.6 76.2 mm x 9.52 mm(Op, 1.1.83 - Det. date 1.2.83 - BL 8330097)

73.13 Steel plates or sheets, clad with monel, chromium, nickel, brass, leaded- 19copper or leaded -tin bronze(Op. 8.11.82 - Det. date 1.2.83 - BL 8330099)

73.14 Cold drawn heading wire to AISI specification 1038, spheroidised 19annealed in process, phosphate coated(Op. 27.9.82 - Det. date 1.3.83 - BL 8255057)

73.14 Soft1.6 mm

rolled flat wire to AISI specification C1010 having a thickness of 19and

6.4.82 -within the width range

25.1.83 -of 12.7 ran

8252339)to 15.75 mm

(Op. Det. date BL

73.15 Cold drawn bright annealed wire to AISI specifications 304,range

304L, 19310 3105, 316 316L, 321, 347 or 410, within the dia ofO.1ó1 mmto 0.1174 mm(Op. 1.1.82 - Det. date 1.3.83 - BL 8251354)

73.15 Cold drawn heading wire to AISI specifications 4140 or C1602, 19spheroidised annealed in process,

1.3.83 -phosphate coated(Op. 27.9.82 - Det. date BL 8255055)

73.15 Flat steel bars to AISI specification 01 having a thickness less than 198 mm or a width less than

8256279)25 mm

(Op. 22.2.83 - BL73.15 Stainless

8 mmsteel bars having a cross -sectional dimension not exceeding 19

(Op. 22.2.83 - BL 8256206)

1930.4.83

19

19

Commonwealth of Australia GazetteNo. P 9, 22 April 1983 Consolidated Bylaw References /Part 1) II

TariffReference

Column 1

73.15

Item andDescription of Goods Validity Date

Column 2 Column 3

Bright cold rolled annealed strip having a chemical canposltion ofC .75 - .85% SI - .35% maxM .6 - 1% V .1 - 3%N 1.5 - 2% Sulphur - .03%Phos - .03% Copper - .25%Chrome - 5 %

(Op. 8.2.82 - Det. date 22.2.83 - BL 8251010)73.15 Prestressed concrete wire low

`12.2.83 -relaxation dia 7 mm

(Op. 1.10.82 - Det. date BL 82 56207)

73.15 Stainless steel wire pylon a dia of 2.7 mm, n ultimate tensilestrength of 1050 N/mm (plus or minus 75 N /mm ) and a maxallowable surface imperfection of 20 microns(Op. 1.3.82 - Det. date 22.2.83 - BL 8251004)

73.15 Flat steel bars to specification DIN x 120 Mn 12, 125 mm x 12 mm(Op. 10.11.81 - Det. date 25.1.83 - BL 8160593)

19

19

19

19

Commonwealth of Australia Gazette12 Consolidated By -law References (Part !I .No. P 9, 22 April 1983

TariffReference

Col umn 1

73.15

73.15

73.15

73.15

73.15

73.15

73.15

73.18

73.18

73.18

73.18

73.18

73.1 8

73.18

73.20

73.20



Column 3

Round edge hot rolled steel flats tomm

specification SAE 9260, in sizesmm x6 ran

mmx 70 ran, 6.5 mm x 70 mm, 7.5 x 70 mm, 11 mm x 70 mm, 11

80(Op. 20.7.82 - Det. date 25.1.83 - BL 8255449)Square40 mm

steel bars, bright8255493)

finished, having an across flat dimension ofor more

(Op. 25.1.83 - BLBimetallic strip to AISI specifications M2 or M3 with backing stripto AISI specification 6150(Op. 11.6.82 - Det. date 25.1.83 - BL 8253396)

Orthodontic treatment wire, in stright lengths, not exceeding1.2 mm dia(Op. 1.8.82 - Det. date 25.1.83 - BL 8059392)Stainless steel round edged flattened wire, AISI grades 304 or 316,sizes 9.40 mm x 1.42 mm, 11.11

25.1.83

mm x 2.03 mm, 12.70 nm x 1.60 mm,15.75 mm x 1.60 mm(Op. 1.8.82 - Det. date - BL 8059946)

Valve spring wire to specification JIS G3522 SWPV(Op. 1.9.82 Oct. date

AISI

25.1.83 - BL 8059342)

Wire to1.3.83 -

specification 4042H(Op. BL 8330080)

Profile steel tubes, "Sigerist" type TS 62 or TS 65(Op. 28.1.83 - Det. date 22.2.83 - BL 8330618)Stress relieved cold drawn seamless tubing to

208.2 mmspecification

JISG 3445 /STWM -13C havingBL 8255460)

an OD exceeding(Op. 25.1.83

Tubes to AISI specification AS 1450 grade 200, or to an equivalentspecification, OD exceeding 170

25.1.83mm- BL(Op. 1.8.82 - Oct. date 8058649)

Alloy steel tubes (other than honed tubes), as follows:Containing chromium, but containing less than 10% chromium

Having an OD exceeding 203 mmHaving an OD of 203 mm or less and a WT exceeding 13 mm

Containing 12% or more chromium, annealedHaving an CO exceeding 304.8 mmHaving a WT exceeding 4.06 mm

(Op. 1.2.83 - BL 8256276)

ERW2 mm

tubes,

3.11.81

CO exceeding 88.9

date 1.2.83mm, having a wall thickness of less than

(Op. - Det. - BL 8253772)

Seamless tubes to specification API 5LX -42 in the following sizes:323.9 mm CO x 17.47 mm WT237.1 mm OD x 15.09 mm WT219.1 mm CO x 12.70 ran 'WT

1.3.83(Op. 11.5.82 - Det. date - BL 8252840)

Tubing to specification API 5L Grade B CO less than 88.9 mm(Op. 22.12.81 - Oct. date 1.3.83 - BL $250264(

Connectors undersea pipeline8156206)

collet(Op. 25.1.83 - BL

Buttweld elbows to material specification A234 WFS, 508 mm nominalbore(Op.

x 32.5 mm wall thickness,_ 90°-

L.R.1.1.82 Dot. date 25.1.83 BL 8251568)

73.20 Swivel joints, "Chiksan" incorporating locking8254641)

flanges(Op. 1.4.82 - Oct. date 125.1.83 - BL

73.21 Sleeves, tubular shaped, including reducer inserts and locking wedgessteeltherefor, capable of securing together concrete

8150914)

reinforcing rodsof the sane or differing diameters

25.1.83 -(Op. 1.7.82 - Det. date BL

73.23 Drums, salvage open head, of 16 gauge or thicker steel, epoxy lined,complete with lid and gasket capable of housing faulty 205 L drumscontaining hazardous materials(Op. 1.5.82 - Det. date 22.2.83 - BL 8252587)

19

19

19

19

19

19

19

19

19

19

19

19

31.3.82

19

19

19

19

19

19

19

Commonwealth of.4ustralia GazetteiVo. P 9. 22 April 1983 Consolidated By -law References (Part 1) 13

TariffReference

Column 1

73.24

73.24

73.29

73.31

73.32

73.32

73.32

73.32

73.32

73.40

73.40

73.40

73.40

73.40

73.40


Column 2


Column 3

Containers cryogenic, insulated or vacuum wall type, having a (dui fled 19gas(Op.

capacity of 1000 L or less25.8.81 - Det. date 25.1.83 - BL 8255480)

Gas cylinders, seamless steel, water capacity 1165 kg, capable of a 19working pressure of 20.684 MPa(Op. 1.2.83 - BL

connecting

8256817)

Chain and links, being parts for longwalI mining system 19armoured face conveyers nd stage loader conveyers(Op. 6.7. P2 - Get. date

and22.2.83 - BL 8256136)

Brads, headless, cement coated 19(Op. 1.1.82 - Det. date 25.1.83 - BL 8160149)Hydraulic clamping nuts incorporating a pressure ring and a hydraulic 19chamber within the body of the nut(Op. 1.11.81 - Det. date 1.3.83 - BL 8160021)

Sealing assemblies of a kind used to pass electrical conductorswithout

19or tubing through the walls of pressure or vacuum vesselsloss of the internal pressure or vacuum(Op. 1.12.81 - Det. date 18.1.83 - BL 8161343)Bearing adjusting nuts having a shaped surface to

inpermitweight

adjustment to 19compensate wear in the bearing,

25.1.83exceeding 1 kg

(Op. 1.6.82 - Det. date - BL 82509411

Pierce nuts, for use otherwise than in the manufacture of motor 19vehicles in compliance with the Government's Motor Vehicle Plan(Op. 25.1 .83 - BL 82561 71 )

Pins, spring steel, tubular, longitudinally split, for use other- 19wise than in the manufacture of motor vehicles In compliance withthe Government's Motor Vehicle Plan(Op. 25.1.83 - BL 8256182)

Connectors, compressor process tube, capable of providing leak free 19connection during the process of checking the compressor portionof sealed units for leaks prior

1.3.83to the charging of refrigerant

(0p..1.6.82 - Det. date - BL 7958166)

Dees, webbing sling,Det.

clsoker or triangular types 19(Op. 2.9.81 - date 25.1.83 - BL 8158606)Noisewith

dampers, saw blade being a steel disc coatedliner

on one side 19visco elastic adhesive and release

(Op. 30.7.82 - Det. date 25.1.83 - BL 8059898)

Microscope television camera stands 19(Op. 19.4.82 - Det. date 25.1.83 - BL 8252480)Rails, fitted with spring steel locking clips, designed for storage 19of socket spanner heads(Op. 1.12.81 - Det. date 1.3.83 - BL 8250512)Snap hooks,accidental

designed for the attachment to and prevention against 19unhooking fran dog leads or animal harness, as follows:

Spring loaded bolt typeSpring arm type

(Op. 8.6.82y- Det. date 1.2.83 - BL 8256052)74.03 Bars,

NOTE:high conductivity, having a "D" cross section 19

Copper which in the annealed condition has ais

8252680)

min conductivity of 100%conductivity(International Annealed Copper

25.1.83

Standard) known as highcopper

(Op. 21.4.82 - Det. date - BL74.04 Aluminium bronze alloy

date614 plate

25.1.83to ASTM B171 specification 19

(Op. 18.5.82 - Det. - BL 8252927)74.04 Slab casting mould lining plates, as

alloy,follows: 19

Copper, zirconium and chromiumCopper silver alloy

(Op. 30.7.82 - Det. date 25.1.83 - BL 8256104)74.07 Copper nickel 90/10 alloy tubing, dia exceeding 90 mm with a WT 19

exceeding 3.25 mm(Op. 6.5.82 - Det. date 22.2.83 - BL 7961257)

Commonwealth of Australia Ga:ette14 Consolidated By -law References (Part 11 Vo. P 9, 22 April 1983

TariffReference

Col Linn 1



Column 3

74.07 Copper tubing21.1.82 -

fitted with a ten spoke- BL

spirally8251442)

fluted aluminium fin 19(Op. Det. date 25.1.83

74.07 Seamless co per tubing, OD exceeding 254 mm 19(Op. 11.2.82 - Bet. date 25.1.83 - 8L 8151172)

74.08 Refrigerant coupl ings, designed for use in the precharging of condenser 19evaporator un-its of split type air conditioning units

(Op. 19.2.82 Det. date 25.1.83 - BL 8251193)74.15 Rivets, contact, copper, having a silver coated 8 mm head, suitable for use 19

on devices having aBet.

current rating of 40 + A(Op. 15.6.81 - date 25.1.83 - BL 8155414)

76.03 Aluminium strip within the width range of 0.315 mm to 0.318 nrn, 0.015 mm 19thick(Op. 22.3.82 - Det. date 25.1.83 - BL 8151442)

76.04 Aluminium foil,18.11.82 -

purity not less than 99.45`6 having a matt brushed finish 19(Op. Det. date 22.2.83 - BL7960295)

76.04 Aluminium foil laminated paper board for subsequent printing and covering 19with an opaque latex type material, as used in the production of 31.12.82"scratch off" instant lottery tickets(Op. 1.11.81 -Det. date 25.1.83 - BL 8255241)

76.16 Roller frames, adjustable fabric tension i82530055)

screen printing 19Del-.(Op. 19.5.82 De. date x22.2.83 - BL

82.01 Scythes 19(Op. 1.7.81 - Det. date 25.1.83 - BL 8156809)

82.01 Shears sheep, handDet.

operateddate 25.1.

19(Op. 36.4.82 - - BL 8253763)

82.01 Shears, sheep 19(Op. 1.3.83 - BL 8330741)

82.02 Butcher saw blades, carbon steel25.1.83

or stainless steel 19(Cp. 1.8.82 - Det. date - BL 8057599)82.03 Sheet metal punches of a type operated by a hand held key 19(Cp. 1.2.82 Det. date 25.1.83 - BL 8251542)82.04 Tool kits, detailed in Tandy

toolElectronics 1982 catalogue, as follows: 19(a)

(b)Cat. 64 -2220, alignment kit; orCat. 64 -2223 TV alignment tool kit

(Op. 1.2.83 - BL 8x256770)

82.04 Steels, knife sharpening 19(Co. 1.11.81 - Det. date 25.1.83 - BL 8255021)

82.04 Carpet lifters, being tools designed to lift carpet panels In computer 19roans so that access may be gained to under floor tiles(Op., 14.2.82 - Det. date 25.1.83 - BL 8252058)

82.04 Glass(Op.

blowing tools, being gathering irons or blowpipes 1929.10.82 - Bet. date 25.1.83 - BL 8255832)82.04 Soldering aid kits, designed for use with electronic conponentry 19being printed circuit boards and the like

(Op. 8.9.82 - Det. date 1.2.83 - BL 8256154)62.05 "Minuteman" standard stock broaches or broach sets 19

(Op. 9.8.82 - Det. date 25.1 .83 - BL 8256364/82.05 Pull broaches having an overall length of not less then 965 rim with a 19length of hardened toothed area of not less than 670 mm

(Op. 1.2.82 - Det. date 25.1.83 - BL 8157785)82.05 Serrated 6 - spline combination broaches, having an overall length 19

exceeding 1350 rim and tooth length exceeding 650 mm(Cp. 16.7.82 - Det. date 25.1.83 - BL 8253822)

82.05 Parts for Latour and fils wire bending machines, being multi -slide 19forming machine tools for forming bucket handle No 3 582 mm grips)(Op. 16.6.81 - Det. date 25.1.83 - BL 8257021)82.05 Panel beating tools, being interchangeable tools designed to be used 19with air

24.2.82hammers

(Op. - Det. date 25.1.83 - BL 8252925)

Commonwealth of Australia Ga:etre,Vo. P 9, 22 April 1983 Consolidated By-law References (Part !) 15

TariffReference

Column 1

82.06

82.06


Column 2

Item andDateValidity

Column 3

Knives, carpet loan, specially designed for installation in carpet 19tufting machines(Op. 28.7.82 - Det. date 25.1.83 - BL 8255077)Knives or plates, designed to be used in industrial meat grinders, 19having a

(a)die not

bladeexceeding 130 mm, being ANY of the following:

Insertion knives;(b) Perforated plates;(c)(d)

Pre -Star

cutting plates;knives

(Op. 14.9.81 - Det. date 25.1.83 - BL 81 58741

82.06 Rasp209.6

blades, segmented, to suit rasp diameters 127 mm, 152.4 mm, 19mm or 266.7 mm, designed for use in tyre retreading operations

to remove worn out tread fran tyre carcasses(Op. 26.10.81 - Det. date 25.1.83 - BL 8157092)

82.06 Rasper knives for rasping machines capable of cutting insulated 19electrical wire prior to granulation having blades made franWS -272L steel specially hardened to

- BLI`1C56DN with helical contours

(Op. 25.3.82 - Det. date 25.1.83 8252781 1

82.06 Meat emulsifying machine parts, being ANY of the following: 19(i) Cutting head with feeding disc;

(ii) Cutting ring;(ili) Insert ring;(iv) Cutting head with feeding

25.1.83spiral

(Op. 1.9.81 - Det. date - BL 8157306)

82.14 Forks ,.11.81

NOT including tableware forks8253512)

19(Op. - Det. date 25.1.83 - BL

83.02 Pneumatic force accumulators in the form of prepressurised length 19adjustable gas springs, but NOT including outerfitting

housings, seat or basefittings, or any other components for or fixing of the pneumaticforce accumulators into the outer housings or to the seat or basefittings of any chair(Op. 1.8.81 - Det. date 25.1.83 - BL 82562741

83.02 Snap hooks, designed for the attachment to andas

prevention against accidental 19unhooking from dog leads or animal harness, follows:

Spring loaded bolt typeSpring armTrigger

type

Det.type

(Op8.6.82 - date 1.2.83 - BL 8330224)

83.05 Protocol register pins and press flag pins, designed for use In graphic 19arts(Op. 1.8.82 - Det. date 1.2.83 - BL 8062681 )

83.07 Spectral Ight colour matching system for the evaluation of colour 19samples(Op. 1.6.82 - Det. date 1.3.83 - BL 8255310)

)

16 Consolidated By-law References (Part /1 ,Vo. P9, 22 April 1983

Tariff 'tern andReference Description of Goods Validity DateColumn 1 Column 2 Column 3

83.09 Buckles of cast-metal , as listed in the table hereunder, as used In the 19the manufacture of animal harness:

THE TABLE

Manufactured by Janes Cotterell d Sons Ltd, UK23C Stirrup leather buckle with roller

144 Extension stirrustirrup leather fitting235 Stirrup leather without roller7D Barred girthgirth buckle with roller7D Barred buckle without roller3440 Loop barred girth buckle with roller344H Loop barred girth buckle with roller75R Victoria bridle buckle with roller13 Fiddle bridle buckle75 Victoria bridle buckle without roller15 Square bridle buckle1665 Heavy whole bridle buckle5111 Light whole buckle132 Swaged side whole buckle152 Swaged side head collar buckle0102 West end harness buckle0122 Swaged side harness buckle0123 Swaged side roller harness buckle0105 Roller harness buckle6082 Roller harness buckle932 Hobble buckle6069 Loop collar buckle6070 Trace buckle

Manufactured by Mathew Harvey d Co Ltd, UK03465 Cincha buckle03377 Quick release buckle02759 Head collar loop buckle01158 Roller girth buckle01579 Gear buckle1101 Barrel roller buckle43988 Roller stirrup leather buckle4398 Stirrup leather bukcle01156 Barred girth buckle976 Stirrup pattern buckle504 Inlet bridle buckle6137R884

Victorian roller bridle buckleHead collar buckle

267 Roller harness buckle704 Military half roller buckle161 West end harness buckle02162 Conway loop buckle133. Melbourne bridle buckle2306 Harness buckle01871 Hobble buckle274 Half swage buckle157402635

Whole Military roller buckleBridle buckle

Manufactured by Samuel Price Ltd, UK1019 Half

Gearroller buckle

234 buckle1017 Square bridle buckle

buckle50 Barred roller99 Whole military roller buckle238 Whole roller buckle100 Stirrup leather buckle with roller100P Plain stirrup leather buckleE12 Half harness buckle223 Hobble buckle150 Rein buckle414 Sham roller buckle98 Equipment buckle104 Looped barred girth buckle105P Plain barred girth buckle1015 Whole crown bridle buckle1015R Whole crown roller bridle buckle121 Whole harness buckle768 Cape dee buckle

(Op. 26.5.82 - Det. date 25.1.83 - BL B2 56663)

Commonwealth of Australia GazetteNo. P 9, 22 April !983 Consolidated By -law References (Part !) 17

TariffReference Description of Goods

Column 1 Column 2

84.06 4 stroke horizontal shaft petrol engines, when not incorporated in 19

or not forming part of other goods 5kW or less at the manufacturersstated maximum rev /min and parts therefor), to be:

(a) close coupled to pumps using the engine shaft directlyconnected to the pump impellor; or

(b) close coupled to generators using the engine shaft directlyunder security(Op. 22.2.83 - BL 8256728)

84.06 Engines, speed

21.9.82

car racing, assembled or unassembled, aircooled orU.S.A.

19

watercooled manufactured by "Scat" U.S.A. or "Cosworth"(Op. Det. Date 25.1.83 - AL 8256156)

84.07 Hydraulic cranking motors, "Hydrotor" serieshousing

CMO, CMA and CND, 19

complete(Co. 1.9.81

with Bend ix drive and- Det. date 22.2.83 - BL 8252151 )

84.10 Power packs, hydraulic, for Longwall mining systems, sing 19pressure pump motor, coupling, control distribution panel andfluid reservoirs with mixing

date 22.2.83components

(Op. 6.7.82 - Det. - BL 8330615)

84.11 Air compressors "Coco pair Reeve) I" models VMP15, VHP36 or VIP36 19

(Op. 28.5. 82 - áe1. date 25.1 .83 - BL 7857210)

84.11 Air compressors, basic, "Westinghouse" types 3VC and 3HC 55, designed 19for air brake systems on railway rolling stock(Op. 25.1.83 - BL 8254688)

84.11 Air compressors, having a maxgauge

-rated capacity not less than 1 180 L/s of 19

free air24.5.77 -

delivered at a min pressure of 689 kPa(Op. Det. date 25.1.83 BL 8255711)

84.11 Accessible a- welded hermetic compressors of 2.7 kW rating or above, for 19use in packaged air- conditioning units, under security(Op. 25.1.83 - BL 8255861)

84.11 Fans, tube axial incorporating an integral motor, having a fan dia 19

notprocessing

155 mm dia, designed for use in automatic datamachines or installations

(Op. 30.3.82 - Det. date 25.1.83 BL 8255862)

84.13(Cp.

light oi, trafe 1.3.

typeDet. BL 8057169

19

84.13 Gas(Op.

burners, natural- Det.

draught,25.1.83 -

"John -Zinc Premix" model 191.5.81 date BL 81562071

84.13 Oil burners fully packaged automatic, overpressure firing with 19pressure jet flame(Op. 1.6.82 - Det. date 25.1.83 - BL 8157276)

84.13 Preheat burner systems, comprising a main coke oven gas and oxygen 19burner having the capability of del iver i ng 1 800 MJ /h and a pilot cokeoven gas burner having a coke gas pressure- of 40 millibars(Op. 6.1.81 - Det. date 25.1.83 BL

84.14 Broilers, hamburgers, "Daumor Broilermaster Maxi" 19(Op. 1.6.82 - Det. date 1.3.83 BL 8254932)

84.15 Brick making machines, dry ice, having a8251903)

capacity less than 19453 kg /hr

11.3.82(Op. - Det. date 25.1.83 - BL84.15 Soft serve icecreem freezers, continuous flow industrial type, having a 19

single(Op.

cylinder mix capacity of25.1.83

140 L or more /hr1.2.82

Calenders

- Det. date - BL 8250820)

84.16 4 roll inverted "L" typeof 0.O6

capable of producing PVC film and 19sheet within the gauge range mm and 0.6

8252016)

mm and in widths up toand including

23.3.82 -1.6 m

(Op. Det. date 25.1.83 - BL84.16 Post calender train for positioning at the let -off end of an inverted 19

"L" calender capable of producing PVC film and sheet within the gaugerange of 0.08 mm to 0.80 mm AND the width range of 1.5 m to 2.6 m,comprising:

Take Of Unit;Embossing Unit;Bridging Unit;Tempering Unit;Cooling Unit

(Op. 10.2.82 - Det. date 25.1.83 - BL 8251052)


Column 3

-

Commonwealth of Australia Gazette18 Consolidated By -law References (Part l) ;Vo. P 9, 22 April 1983

TariffReference

Col umn 1

84.17

84.17

Item andDateDescription of Goods Validity

Col umn 2 Col umn 3

Automatic autoclaves having a removable Inner vessel, sterilization 19temperature range uooC to 3 0 ,o capable of preparing sterilemedia at

2.6.82the rate of 5 L or more /h

(Op. - Det. date 15.2.83 - BL 8253168)Broilers continuous belt, automatic, capable of broiling hamburger 19meat patties on both sides simultaneously(Op. 6.4.82 - Det. date 15.2.83 - BL 8252279)

1. ur,unvn ¡, ' . - -.'No. P 9, 22 April 1983 Consolidated By-law References (Part /1 19

Tariff Item andReference Description of Goods Validity Date

Column I Column 2 Column 3

84.17 Panels, flexiblevessels

electrically heated, designed for attachment to 19

storage to maintain8256734)

or vary temperature of contents(Cp. 15.2.83 - BL

84.17 Compensators tube, gas cooler fabricated from stainless steel 19tubing to

14.7.82.AIStI specifications 446 or 430

(Op. - Det. date - BL 8253742)

84.17 Cool) .5ystemsdefr7tláfés25.Ti:8j fo[Lc55 455 -cult T.V. camera housings 19

84.17 Crouton manufacturing plants, dehydration, automatic, capable of an output 19of 300 k g/ h(Op. 16.11.81 - Det. date 25.1.83 - BL 8160556)

84.17 Distillation plants, crude oil, re- locatable, fully automatic, suitable 19for processing hydrocarbon liquids for use as specific engine fuels(Op. 19.1.81 - Det. date 25.1.83 - BL 8151107)

84.17 Furnaces,(Op.

toughened- Oct.

safety glass tempering horizontal roller hearth 19

13.7.82 date 25.1.83 - BL 8253159)

84.17 Nut processing plants, tunnel type, capable of drying, roasting cooling and 19blanching nuts then removing the fines, colour sorting and coating theblanched kernel(Op. 21.9.81 - Det. date 25.1.83 - BL 8159183)

84.17 Preheating screws designed for the purpose of continuously raising the 19

temperature of calcined coke and recycled baked anode scraps by means ofa fluid heat transfer system, being portion of a carbon anode paste plant(Op. 19.10.81 - Oct. date 25.1.83 - BL 8159866)

84.18 In!ine or tee type high pressure hydraulic fluid filters, series 19FRH or(Op.

FRK, designed for use with Hydrotor" engine starting systems1.9.81 - Det. date 15.2.83 - BL 8252154)

84.18 Filter cartridges, having a basis of activated carbon designed tofiltration19

be usedof

In the food service industry for the secondarywater to remove taste and odour

(Op. 2.12.81 - Oct. date 1.3.83 - BL 8251136)84.18 Degassing and filtering units, "Fild" or "Gautschi ", for molten 19

aluminium(Op. 19.11.82 - Det. date 1.3.83 - BL 8330478)

84.18 Acidaluminium from

purification units "Ecotec" brand, for the removal of 1915% to 20% sulphuric acid in

8252833)

the anodisingindustry(Op. 18.5.82 - Det. date 1.3.83 - BL

84.18 Hydro extractors centrifugal, designed for use In the laundry 19or textile industries for the removal of

8254057)

liquids after the dyeingor washing process(Op. 28.7.82 - Det. date 15.2.83 - BL

84.18 Hydro extractors centrifugal, designed for use in the laundrythe dyeing

19or textile industries for the removal of liquids afteror washing process(Op. 28.7.82 - Det. date 1.3.83 - BL 8330823)

84.18 Pressure filters, portable, suitable for use in aluminium smelters to 19filter liquid aluminium(Op. 8.4.82 - Det. date 25.1.83 - BL 8252177)

84.19 Carbonators, beer, Witteman Hassel Berg, 101.6 mm (4 Inch) or 152.4 mm 19(6 inch) pinpoint types(Op. 24.2.82 Det. date 22.2.83 - BL 8251590)

84.19 Filling machines, aseptic Strunck type FKL E 04/06 19(Op. 10.6.82 - Oct. date 112.2.83 - BL 82533511

for84.19 Form/fill /seal machines, "Rovema ", designed handling food 19products at more than 100 bags or cartons per

8157395)

minute, but notincluding electronic weighing units(Op. 17.7.81 - Det. date

fully1.3.83 - BL

84.19 "Pneumatic Scale" automatic synchronised "Pneumaflow" packagingline designed for filling to a predetermined height, shampoo ordetergent product In light plastic bottles, at speeds of up to 300bottles per

12.1.82 -minute

(Op. Det. date 1.3.83 - BL 8058380)

19

-

. .

20 Consolidated By -law ,References (Part ItCommonwealth of Australia Gazette

Vo. P 9, 22 April 1983

Tari f fReference

Co I um n 1

Item andDescription of Goods Validity DateColumn 2 Column 3

84.19 "FMC" Model 21G gr-anula fillers incorporating a telescopic pre -measuring top, designed for filling340 mm

weights of 154 grams for 301 mmx 207 mm cans or 340 Grams for x 407 mm cans at speed of120 to 300 cans per minute(Op. 1.12.81 - Det. date 22.2.83 - BL 8159615)

84.19 Labelling machines, automatic, beingof

machines whichapplying

applylabelslabelledenvelopes to packages and are capable 30,000

:Op. 29.9.81 - Det. date 22.2.83 - BL 8159403)84.19 Cigarette packaging machinery as fol lows:ial

(b)Cigarette packet forming, filling and closing machines;Cigarette packet wrapping machines;

(c) Machines combining functions of cigarette packet formingfilling, closing a- wrapping with cigarette packet collatingor overwrappf ng

(Op. 1.11.82 - Det. date 15.2.83 - BL 8251663)84.19 "Mitsubishi Rap -Round Model G2 -H"

-corrugated cardboard casing machines,designed for

-packaging canned products at 60 cans per minute or more(Op. 23.8.82 Det. date 15.2.83 BL 8254605)84.19 Parallel packing plants, "Organpak ", designed for the parallel

packing of14.4.81 -ferrous nails, screws, bolts and the like

(Op. Det. date 15.2.83 - BL 8154787)

19

19

19

19

19

84.19 Shrinkwrapping machinery complete with tunnel, automatic, designed 19to collate and shrinkwrap cans, bottles, jars or multi packs ofsame, either with or without a tray or die -cut pad, in eitherclear film or printed film registered to the pack at speedsranging from 40 collations to 300 collations of packs per minute,BUT NOT including machines which shrink or stretch wrappalletized packs of such goods(Op. 1.1.83 - Det. date 15.2.83 - BL 8254995)

84.19 "FMC" Model THS -2 or HS -2 heat sealing machines, complete with 19overhead Transfer units designed for heat sealing food trays atmore(Op.

than 1419.8.81

000 trays /h- Det. date 15.2.83 - BL 8160853)

84.19 Seal ing machine conversion equipment, designed to convert crown 19sealing equipment to rip cap sealing machines(Op. 1.9.82 - Det. date 15.2.83 - BL 8056668)

84.19 Seaming machines can, "Ferrum" Model FS(Op. 25.10.82 - Det. date 15.2.83 - BL 8255780)

84.19 Can closing machines, automatic suitable for the vacuum sealing146 mm

ofirregular(Op. 1.1.83

shaped cans, having min dimensions of 100 mm x- Det. date 25.1.83 - BL 8252220)

84.19 Auger fillers, designed for filling containers with liquids, pastes,powders, granules and the like having an accuracy of + up to 1%(Op. 13.3.82 - Det. date 25.1.83 - BL 8251665)

84.19 Combined filling and capping machines capable of fillinginclusive)

bottleshaving capacities between 3 ml

productsand

- BL

500 ml (both withliquid or semi - liquid(Cp. 1.10.82 - Det. date 25.1.83 8159571)

84.19 Filling machines, powder, continuous rotary, having 12 or morefilling stations with a max filling capacity per station of 5 kg(Op. 26.3.82 - Det. date 25.1.83 - BL 8252129)

84.19 Form/fill /seal machines,

Det. datedesigned for the production of strip packsuppositories

(Op. 25.1.82 - 25.1.83 - BL 8252809)84.19 Form ing, f i l l i ng and sealing machines for the

8155997)

packaging of towelettesin sachets(Op. 1.8.82 - Det. date 25.1.83 - BL

84.19 Sprayers, being spherical rotating sprayfor

heads driven by the flow ofsolution through the head, designed cleaning tanks, vessels and thelike(Op. 17.2.81 - Det. date 25.1.83 - BL 8152126)

84.19 Automatic wrap /stacking machines, designed for the wrapping ofpositive or negative battery plates in separator material,ultrasonically welding

platesthe edges of the wrapping medium and then

stacking the alternatively(Op. 13.4.82 - Det. date 25.1.83 - BL 8252597)

19

19

19

19

19

19

19

19

19

Commonwealth of Australia GazetteNo. P 9, 22 April /983 Consolidated By -law References (Part 1) 21

TariffReference

Column 1

84.19

84.19

84.20

84.21

84.21

84.21


Col unn 2

Item andVal idIty Date

Column 3

Infine wrapping machines designed to automatically fold and wrap 19

newspapers, magazines and the like(Op. 22.9.82 - Det. date 25.1.83 BL 8254981)

Bakery washer - dryers, fully automated, capable of washing and 19drying 1

1.9.82800 plastic bread baskets /h or 900 baking sheets /h

(Op. - Det. date 15.2.83 - BL 8254667)Parts, designed to be used In the manufacture or repair of 19hydroscal es, as follows:

Capillary tubesDials, calibratedDial glassesDial HousingMounting platesMovement mechanismsPointersTrack

(Op.caster

-!angers

14.9.82 Det. date 1.3.83 - BL 7955384)

"Lechler" SZ(Op. 3.6.82

series precision spray nozzles8253213)

19- Det. date 22.2.83 - BL

" Schiich" M200 nozzles or pipes, PTFE lined, designed for 19incorporation into a gas cleaning plant(Cp 1.5.81 - Det. date 22.2.83 - BL 8161072)011mist lubricators, whether or not incorporating an air heater 19and pressure switch, designed to be used for the lubrication of

6.35machinery but NOT including lubricators with a port size of mm

(1/4 in) 9.525 mm (3/8 in) or 12.7 mm (1/2 In)(Op. 22.2.83 - BL 8256298)

84.21 Dispensers, acetone, consisting of a plastic bottle fitted with 19

a pump and nozzle, designed for spraying acetone onto tissuewhich in turn is used to clean opthalmic lenses(Op. 1.6.82 - Det. date 15.2.83 - BL 8251462)

84.21 Dispensing kits, polyurethane foam, portable, "Insta -Foam 19

Froth -Pak'(Op. 12.5.82 - Det. date 15.2.83 - BL 8252820)

84.21 Fettling machines, spin, being pneumatically operated controlled 19spray machines for the application of refractory lining materialsto the interior of electric arc furnaces(Op. 25.6.82 - Det. date 15.2.83 BL 8253502)

84.21 Adhesive applicators, including turntable, designed for applying 19adhesive sealant compound around the circumference of car windscreens(Op. 1.7.82 - Det. date 25.1.83 - BL 8254873)

84.21 Fogging orsize

14.12.81

spraying machines that produce a fog or spray with a 19particle not exceeding 60 microns(Op. -Spraying

Det. date 25.1.83 - BL 8161455)

84.21 machines, refractory mortar complete with telescopic 19nozzle designed for use in the

1.3.83repair of furnaces

(Op. 20.4.82 - Det. date BL 8252538)

84.21 Wagner "plast -o- coat" models 35, 45 or 55 spraying machines 19(Op. 3.9.82 - Det. date 25.1.83 - BL 8251110)

84.22 Cleaning tank strip deflector roll for tin cleaning line,146847

roll 19dia 40.64 an, to Australian Iron and Steel drawing(Op. 30.7.82 - Det. date 22.2.83 - BL 8254071 1

84.22 Parts for armoured face conveyors, being components for iongwal I 19mining systems, as follows:

Conveyor chains complete with flight barsFlight barsDrive stations completeConvex or concave transition pans having a bend in excess of 50

(Op. 6.7.82 - Det. date 22.2.83 - BL 8330614)84.22 Parts for stage loader conveyors, being parts for longwall mining 19

systems, as follows:Conveyor chains complete with flight barsDrive stations completeReturn end modulesFlight barsConvex or concave transition pans having a bend in excess of 50one piece sigma sections in

22.2.83 -lengths of 3 metres or more

(Op. 6.7.82 - Det. date BL 8330613)

Commonwealth of Australia Gazette22 Consolidated By -law References (Part 11 ,Vo, P 9, 22 April 1983

Tariff Item andReference Description of Goods Validity DateColumn 1 Column 2 Column 3

84.22 Coresetters designed for the automatic Insertion of cores in moulds 19(Op. 2.11.82 - Det. date 22.2.83 - BL 82 55951)

84.22 Transporters, pneumatically operated, air flotation, designed for 19the movement of sheet glass into and out of an autoclave(Op. 15.2.82 - Det. date 22.2.83 - BL

operated,8251178)

84.22 Overhead hoists, pneumatically designed to lower and raise 19goods in a factory cr warehouse

o. 23.8.82 - Det. date 8.2.83 - BL 8253752)84.22 Log loaders "Raygo Wagner" models L-70, L -80, L -90, L-120, L-470, 19

L-490 or L-á120(Op. 20.10.81 - Det. date 25.1.83 - BL 8161180)

84.22 "Maxi force" or "Vetter" pneumatic lifting bags 19(Op. 1.1.83 - Det. date 1.3.83 - BL 8153216)

84.22 Power units, hydraulic, having an oll filled metal tank housing a 19screw pump and submersible electric motor, designed for use withhydraulic lifts(Op. 14.8.81 - Det. date 1.3.83 - BL 8158202)

84.22 "Puretic" or "Petrel" power blocks, designed to8255998)

handle fishing nets 19(Op. 18.8.81 - Det. date 25.1.83 - BL

84.22 Roll stands, self loading, shaftless roll out, designed to load rolls 19

25.5.82d- aDDet. date 25.1.83 - BL 8050556)ing system

84.22 Service vehicles, special purpose, aluminium furnace tending 19(Op. 25.8.82 - Det. date 1.3.83 - BL 8254512)84.23 Components for Longwal 1 mining systems (not being at the time of 19

importation, part of a complete or substantially complete system),as follows:

Shearers, coalHaulage system, chainlessCable handling and protection

22.2.83devices of the Bretby type(Op. 6.7.82 - Det. date - BL 8330612)

84.23 'Gardener- Denver" blast hole drilling machines, model numbers listed 19in the Table hereunder, provided the goods were ordered after12 August 1982 and are entered for Home Consumption after 1

drillApril 1983,but NOT including when imported separately, extension steel

equipment, as follows:extension rods

- shank rodsTHE TABLE

ID 25CGD 25/35CCD 60RDC 168

(Op. 3.11.82 - Det. date 22.2.83 - BL 8255900)84.23 "Ingersoll -Rand" blast hole drilling machines, model numbers listed in

the Table hereunder, provided the goods were ordered after 12 August1982 and are entered for hone consumption after 1 April 1983, butNOT including, when imported separately, extension drill steelequipment, as follows:

- extension rodsshank rods

THE TABLE

DM 20DM 25DM 35

(Op. 22.2.83 - BL 82 561 41 )

CM 40DM 45DM 50

19

oOp..

Commonwealth of Australia GazetteNo. P 9, 22 April 1983 Consolidated By -law References (Part 1) 23

TariffReference

Column 1

84.23


Column 2


Column 3

"Dr H tech" blast hole drilling machines, model numbers listed inthe Table hereunder, provided the goods were ordered after12 August 1982, and

butare entered for home consumption after

1 April 1983, NOT including, when imported separately,extension drill steel equipment, as follows:


THE TABLE

D 4CK(Op. 1.4.83 - Det. date 22.2.83 - BL 8256316)

84.23 "Rotamex" blast hole drilling machines, model numbers listed In theTable hereunder, provided the goods were ordered after 12 August 1982,and are entered for Home consumption after 1 April 1983, but NOTincluding, when imported separately, extension drill steelequipment, as follows:


THE TABLE

19

19

130270320

17022202

(Op. 22.11.82 - Det. date 22.2.83 - BL 62561 75)84.23 "Grade II" hydraulic excavators

date 22.2.8319

(Op. 30.11

Attachments,

- Det. - BL 8256606)

84.23 dipperstick, extendable, designed to increase the effective 19length of backhoe dippersticks(Op. 17.11.81 - Det. date 25.1.83 - BL 8160861 )

84.23 "Bauer" drilling machines as listed in the table hereunder, BUT NOT 19including, when imported separately, extension drill steel equipmentas follows:


THE TABLE

BG 7(Op. 23.10.81 - Det. date 25.1.83 - BL 8159906)

84.23 'Krupp' mobilebut

crawlerNOT

wagon drilling machines as listed in the tablehereunder including, when imported separately, extension drillsteel equipment as

extension rodsfollows:

-- shank rods

THE TABLE

Dl-R 80HD 30

(Op. 5.10.82 - Det. date 25.1.83 - BL 8255484)84.23 "Loneyear" drilling machines, model numbers as listed in the Table

hereunder, but NOT Including when imported separately, extensiondrill steel equipment as follows:


THE TABLE

24 Wolverine38 E.H.S.44 E.H.S

(Op. 23.11.81 - Det. date 25.1.83 - BL 8160872)84.23 "Toyo" drilling

but NOTmachines, model numbers as listed in the Table

hereunder, including when Imported separately, extensiondrill steel equipment as follows:

- extensionshank rods

rods-

THE TABLE

TYCO 120(Op. 27.8.82 - Det. date 25.1.83 - BL 8255983)

19

19

19

24 Consolidated By -law References (Part J)Commonwealth of Australia Gazette

No. P 9, 22 Aprii 1983

Tariff Item andReference Description of Goods Validity DateCol umn 1 Column 2 Column 3

84.23 Mining machines "Alpine Miner" models AM50 and ÁM75, crawler- mounted, 19continuous(Op. 13.10.82 - Det. date 25.1.83 - BL 8161203)

84.23 Pile(Op.

drivers, vibratory designed to drive and extract piles 1921 .7.82 - Det. date 25.i.83 - BL 8254084 )84.23 Surface mining machines, as follows: 19

"East-miner" model 1224"Wirtgen" model 3000 SI

(Op. 16.8.82 - Det. date 25.1.83 - BL 8255618)84.23 Tractor portion for rail handling and laying machines, but NOT 19including:

(a) buckets, dippers, grabs, grapples, shovels and other attachmentsof a kind similar to the foregoing; or(b) any other components not forming part of the tractor portion

(Cp. 1.9.82 - Det. date 25.1.83 - BL 8[51447)

84.24 Loaders tractor drawn, designed for picking up fruit from a windrow, 19el imina -ln refuse and loading25.1.83

the fruit into a truck(Op. 1.7.82 - Det. date - BL 8252889)

84.24 Seedling planters, designed fo1.3.83 -

plant tree seedlings in unprepared 19soil(Op. 11.8.82 - Det. date BL

9600

8254368)

84.24 Weeders, rod, "Rite Way" model RD 19(Op. 27.8.82 - Det. date 25.1.83 - BL 8055338)

84.24 Windrowers, being self - propelled vehicles designed for raking fruit 19from under1.7.82

trees into wi ndrows25.1.83(Cb. - Det. date - BL 8253194)

84.25 Belts endless "Royer" model 262 shredder mixer 19(Op. 1.1.81 - Det. date 22.2.83 - BL 8063096)84.25 Choppers maize "JF" type MH30 power take -off type 19(Op. 28.0 m

.82 - Det. date 22.2.83 - BL 8255070)84.25 Machines designed for the testing or grading of grain samples 19

in laboratories or grain inspection offices(Op. 1.9.82 - Det. date 22.2.83 - BL 8059260)

84.25 Combine harvesters, axial flow, as specified in the Tablethan 146

below, 19havving_an engine power output rating of not less kW

THE TABLE

Manufacturer Model

International Harvester 1480Al I is Chalmers N6 N7White 9700

(Op. 18.1.83 - Det. date 22.2.83 - BL 8330802)84.25 Combine harvesters (NOT being axial flow harvesters), having

a threshing drum not less than 1491 mm (58.7 in) in width(Op. 18.1.83 - Det. date 22.2.83 - BL 8330801)

84.25 Tobacco carbine harvesters, but not including conveyor platformharvesters(Op. 27.8.82 - Det. date 22.2.83 BL 8254558)

84.25 Hay balers designed to produce ahigh

bale with cross sections of notless than fí38 mm (25 inches) and not less than 765 nm (30 inches)wide(Op. 24.2.81 - Det. date 22.2.83 - BL 8152933)

19

19

19

-

Commonwealth of Australia GazetteNo. P 9, 22 .April /983 Consolidated By -law References (Part /I 25

Tariff tern andReference Description of Goods Validity Date

Column 1 Column 2 Column 3

84.25 Components for the manufacture of "Sperry New Holland" Model 317 19

square hay balers, as follows:Part Code Part No Description

A 3843638690

Pilot Bearing Spring RB Pilot Bearing Spring LC 41615 Finer BarD 41 61 7 Spring Stop AssemblyE 22240 Spring Pilot Weld Assembly LF 34021 Pick -up 'wheel AssemblyG 65030

65621Feeder Finger

H Feeder Cr TyeI 65624 Chain BearingJ 88626 Arm Weld AssemblyK 261871 Guard S Weld Pin AssemblyL 189655 Guard Assembly LHM 189657 GuardN 165129 Twine Box LidO 577621 Knotter Shaft AssemblyP 38423 Cam Track FrontQ 38424 Can Track RearR 58640 Feeder ToothS 257069 Rod End d Bush Assembly

(Op. 1.9.82 Det. date 18.1.83 - BL 8253726)84.25 Almond processing machinery as follows: 19

(a) Destoners designed for the removal of heavy foreign materialfron almonds;

(b) Gravity tables designed for the grading of almond kernels;(c) De- twiggers, designed for separating twigs and sticks from

almond s-(Op. 18.1.83 BL 82 56214)

84.25 Pickers,(Op. 25.

cotton 191.83 - BL 8256201 )

84.25 Rasp bars, combine harvester 19(Op. 1.11.82 - Det. date 1.3.83 - BL 8255905 )

84.25 "Ryan" model SCDV3 heavy duty automatic sod cutting, rolling and 19harvesting machines with cutting widths of 304.8 mm (12 ") to457.2 mm (18 ")(Op. 22.2.82 - Det. date 25.1.83 - BL 8251508)

84.27 Topping up machines, bottle, automatic, designed for topping up 19

wine(Op.

bottles after- Det.sediment removal

29.6.82 date 25.1.83 - BL 8253551 )

84.28 Brush cutters, "Roanoke" Model SB -110 designed

8161495)

for Installation 19

on(Op.

graders1.1.81 - Det. data 1.3.83 - BL

84.28 "Royer" shredder - mixers, Models 110 or 1128158947)

19(Op. 1.1.83 - Det. date 1.3.83 - BL

84.28 Screw presses, oilseed, having a maximum output capacity not 19exceeding 200 Kg/hr(Op. 18.1.82 - et. date 1.3.83 - BL 8250679)

84.30 Curing and massaging machines vacuum, meat 19(Op. 12.10.82 - Det. date 22.21.83 - BL 8255629)

84.30 Cake batter slurry mixers, incorporating a pump for theholding tank

purpose 19

of(Op

automatically transferring a mixed batch to a16.11.81 - Det. date 22.2. 83 - BL 8160554)

84.30 Biscuit cutting machines rotary 19(Op 3.8.82 - Det. date 8.2.83 - BL 8256811 1

84.30 Moulds, chocolate making machine25.1.83 -

19(Op. 6.4.82 - Det. date BL 8256078)

84.30 Pulling wheels, animal sausage casino 19(Op. 26.2.82 - Det. date 25.1.83 - BC 8251570)

84.30 Separators, meat, capable ofmeatrecovering usable flesh from sinewy 19

cuts or portions of deboneddate 25.1.83(Op. 18.8.82 - Det. BL 8254478)

Commonwealth of Australia Ga_ette26 Consolidated By -law References (Part I) No. P 9, 22 April 1983

TariffReference

Column 1

84.30

84.31

84.31

84.33

84.33

84.40

94.40

84.40


Vegetableslicing, slicing shredding and granulating machines, capable of 19stripping and shredding in straight, crinkle or Juliennecuts at a slicing rate of 3.6 t7h(Op. 1.6.82 - Det. date 25.1.83 - BL 8253625)Laminating machines, designed to adhere paper to corrugated board 19(Op. 10.2.82 - Det. date 22.2. 83 - BL 8250982)

Showers, steam, moisture profile control, paper making machine, as 19fol lows:Devron models MD or W 6A/32

(Op. 23.2.82 - Det. date 25.1.83 - BL 8251450)Single rotary sheet cutters, min web width 1700 mm capable of 19converting reels of paper and paperboard products to 'ISO' standard'A' and 'B' sized sheets, including splice detector and rejectgate, but NOT including unwind stands and unwind shafts(Op. 25.1.83 - BL 8255859)

Slitting - rewinding machines having a width of 4.8 m and an operating 19speed of 2200 m /min, designed and

setequipped with automatic reel

change, automatic reel charge, automatic web tension andcontrolled reel density, capable of handling paper within therange of 100 g s

date1.3.83(Op. 11.8.828 - Det. - 8L 8254479)

Puff(Op.

ironing24.8.82

machines 19- Det. date 22.2.83 - BL 8254530)

Dry - cleaning machines to which 84.40.2 applies, using chlorinated or 19fluorc- chlorinated solvents as the cleaning fluid(Op. 1.1.83 - De +. date 1.2.83 - BL 8330082)Dyeing machines as follows: 19

- "ATYC" brand - Rapid Suau S- "Gaston County" brands - Adualuft Ct

- Aqua l uft C- Aquavel

- 'Qlatt Longclose" brand - Softflow atmospherichigh temperature- Softflow

- Uniflow--

VenturaColonat

sprint- 'Prof! and Solm ann" brand- "Roaches" brand -

-ThreeMCS S

Bath Fluid Bed Mk II- "S i I uro Jet" brand i l uro Jet- "Then" brand -

-EconomyKFA

- Then flow- "Thies" brand - Echo -Soft

- Rotostreamy- Softstream

(Op. 1.3.83 - BL 8330090 )

84.43 Moulds, 700 mm long,Det. date

for continuous slab casting machines 19(Op. 2.9.82 - 22.2.83 - BL 8254653)84.43 Casting

(Op.wheels

- being copper chrome-

zirconium8057544)

or copper sliver wheels 191.9.82 bet, date 25.1.83 BL

84.43 Aluminium moulds, horizontal direct chilling,BL 8161280)

of a kind used for casting 19aluminiun ingots(Op. 1.4.81 - Det. date 25.1.83 -

84.45 Cutters, link chain "Hardypick ", hand operated, capable of cutting 19mild(Op.

steel link chains up to 19 mm diameter3.2.82 - Det. date 1.3.83 - BL 8250981 )

84.45 Cylinder block counter bore tools, Cummins part numbers ST 1255 and 193375455(Op. 1.9.82 - Det. date 1.3.83 - BL 8053271)

Commonwealth of Australia GazetteNo. P 9, 22 April 1983 Consolidated By-law References (Part 11 27

TariffReference

Column 1

84.45

Description of GoodsCo l um n 2


Column 3

Goods, as follows, to which 84.45.200 applies: 19Drawing, forging, hammering, pressing, riveting or straighteningmachines but not including;

(a) Machines (other than those designed solely or principallyfor preparing or working printing blocks, plates crcylinders), as follows:

(i) curving, straightening grooving edging or, seen ingmachines for working sheet metal ( irrespective ofgauge);

( 1 i ) presses, forming, including such machines that formand cut;

(Iii) riveting machines, non - pneumatic, rotary spinning,having a stroke not exceeding 50.8 mm;

(b) Portable hydraulic roll swag ing machines(Op. 1.1.83 - Det. date 1.3.83 - BL 83306 91)

84.45 Goods to which 84.45.2 applies, but not including: 19(a) polishing machines;(b) rail drills;(c)

(Op.rail saws

1.1.83 - Det. date 1.3.83 - BL 8330783)84.47 Drilling and Inserting machines, automatic, designed to drill holes and 19

insert a metal threaded insert in furniture knobs, handles and the like(Op. 1.9.82 - Det. date 8.2.83 - BL 8254329)

84.47 Socketing machines (also known as belling machines) automatic, as used 19to enlarge ends of plastic pipe for joining(Op. 25.1.83 - Det. date 8.2.83 - BL 22 55950)

84.47 Docking and shaping machines, automatic, complete with cutter sets 19(Op. 1.12.82 - Det. date 8.2.83 - BL 8160186)

84.47 Perforators 3 stage, of a kind used- BL

in the

8253958)

production of corrugated slotted 19

(Oagriculturaldrainage pipe

p. 1.2.82 - Det. date 25.1.8384.47 Veneer presses incorporating a tray holder, designed to apply

membraneveneer on to 19

contoured surfaces using compressed air and a flexible(Op. 27.4.82 -Det. date 25.1.83 - BL 8252555)

84.48 Collets being G.M.H. part Nos. 0016- 510 -66, 0016- 510 -67, 190016 -510- 125, 0016- 510 -131, 0016- 510 - 132, 0016- 510 -133,0016 - 510 -229, 0016- 510 -239, 0016- 510 -241, 0016- 510 -242,0016- 510 - 245, 0016- 510 - 251, 0016 -510- 262, 0016- 510 -300,0016- 510 -310, 0016- 510 -362, 0016 - 510 -363, 0016 -510 -340,0016- 510- 341 0016- 510 - 342 0016- 510 - 343 0016- 510 -344(Op. 15.9.82- Det. date 2 §.1.83 - BL 8255294)

84.48 Moulders, feeding attachments, automatic, for use with spindle moulding 19machines(Op. 1.1.83 - Det. date 1.2.83 - BL 8330287)

84.50 Burners, "Swirljet" air- acetylene for soldering, heating or brazing 19operations(Op. 14.10.82 - Det. date 25.1.83 - BL 8052771)

84.53 Datain

terminals which convertform

handwritten data to alpha numeric characters 19machine readable

(Op. 21.7.82 - Det. date 25.1.83 - BL 8254891)84.53 Microboard computer development systems, RCA Cosmac

8255779)

models 19

(Op. t2069. da1eCD,3.83 BL

84.53 "Oster Loomdata" systems but not Including printer terminals and 19video terminals(Op. 1.10.82 - Det. date 1.3.83 - BL 8254056)

Det.

Commonwealth of Australia Gazette28 Consolidated By -law References (Part 11 No. P 9, 22 April 1983

TariffReference

Col um n 1



Column 3

84.54 Computer graphics display terminals:Advanced Electronic Design, models

AED 51 2AED 767;

19

Aydin5215

model -5105 5205A 5405 5525 5576 8018 8040 82955216 5114 52058

52125214

54065518

5550A 5804 8019 8063 839552175217CT

51155116

5571 80138017

80378039

80678250

88105520

RS 0-2 7;5375 8830

Chromatics, models -CG1399 CG3999 CG7900CG1599 CG5599

Consolidated Electronic Industries, modelsCD 33GO 33;

84.54 Cont Control Data-21;

Corporation, model4003

Data General modelG306;

-Dasher

Digital Equipment, model -VT125;

Hewlett Packard,2623A

models -262962 64 7A2647F2648A26490

with or without any or all of the following options034,

-003, 004, 007, 013, 015, 016, 030, 032, 033, 054, 096, E34;IBM models -

3251;

-

Commonwealth of Australia GazetteNo. P 9, 22 April 1983 Consolidated By -law References Part 1) 29

TariffReference

Column 1

84.54



Column 3

Computer graphics display terminals: continuedID Systems Corporation, model -

ID-1 00;

Intecolor, series8000830089003600;

Intergraph, models

OSFFUaFOO25;

Memorex, model -2079

Microtel, model -VTX202;

TAB-EDP Systems, model -TAB 132/15G.

Tektronix, models -4006 4025 4027A -14006 -1 4025A 4027A -24010 4025A -1 4027F304010 -1 4025A -2 41124012 4025A-3 41134012 -1 4025A -4 41144014 4025A -5401 4-1 4025A -6

4016 -14025F304027A

with or without any or al of the fol lowing options;1 2 3, 4, 4A, 48, 4C, 4E, 4F, 5 6 10 11 12 13

14 `S0, `51 ,`52, 34,36, 38, 40, 41, 42, 43, 48, 49, 52, Al, A2, A3, A4;

Vector General, model -VG 8250

19

Visual, models500550;

(Op. 1.2.83 - BL 83 30094 )NOTE:

Any addition to the above, being either the product of one ofthe above or some other manufacturer will be considered uponreceipt of an ad -hoc by -law application

84.54 Label or ticket printers, designed for interfacing to electricaldigital 19 price computing scales to print prices and similardata(Op. 30.7.82 - Det. date 1.3.83 - BL 8254073 )

84.54 Punching machines, hand operated, for punching one, two, three or 19four round holes in pages prior to insertion in binders and the like(Op. 1.7.82 - Det. date 1.3.83 - BL 8330551)

84.56 Presses brick Crossley ", friction refractory8252032)

type 19

(Op. 1.3.82 -brick,

date 22.2.83 - BL

84.56 Sizers (breakers), mineral, being components for LongwaII mining 19syy stems(Op. 6.7.82 - Det. date 22.2.83 - BL 8330611)

84.56 Core shooting machines, designed to shoot foundry sand Into core boxes 19(Op. 9.6.82 - Det. date 25.1.83 - BL 82 5331 9)

84.57 Furnaces, glass bending, as used in the production of laminated glass 19windscreens(Op. 25.11.81 - Det. date 25.1.83 - BL 81 61 258)

84.59 Air duct making machines, designed to produce ultrasonically welded 19plastic ventilation and air conditioning ducting(Op. 14.1.83 - Det. date 23.2.83 - BL 8330255 )

84.59 Foaming machines, Oakes TagfiltersNo. 1318 -004, designed to form foam plastic 19

ends of automotive(Op. 1.11.82 - Det. date 22.2.83 - BL 82 5561 9)

Dept.

30 Consolidated By -law References (Part l(Commonwealth of Australia Gazette

No. P 9. 22 April 1983

TariffReference

Column 1

84.59


tem andValidity Date

Column 3

Parts for roof support hydraulic kits, being components forLongwall mining systems, as follows:

Support valve pack assemblies;Canopy support legs;Electronic and /or hydraulic control equipment;Canopy tip rams;Conveyor push rams;Multibore hoses;Side

t -aDét. date 22.2.83 - BL 8330610)

84.59 Coffee grinding and dosing machines, designed to grind and dispensemeasure doses of coffee(Op. 9.9.82 - Det. date 13.1.83 - BL 8254766)

84.59

84.59

84.59

84.59

84.59

84.59

Cot grinders, "Dayco Junior ", designed to grind or true rubber cots(Op. 2.4.82 - Det. date 13.1.83 - BL 8252233)

Habitat system for underwater hyperbaric welding8330016)(Op. 22.12.82 - Det. date 13.1.83 - BL

Heating probes, designed to be used in runnerless injectionmou ldinngg systems(Op. 1.6.82 - Det. date 13.1.83 - BL 8051407)Nutrunners multi - spindle automatic indexing, DC type(Op. 13.8.82 - Det. date f.2.83 - BL 8254332Anti -fall systems being

datea rigid25.1.83

carrier ladder8058657)

safety device(Op. 16.6.82 - Def. - BL

Infector assembly stands, designed +o be used in the assembly of fuelinjectors for30.8.82

diesel engines(Op. - Det. date 25.1.83 - BL 8255686)

84.59 Astronomical observation dames not exceeding 3 m dia, complete withflat roof adaptors(Op. 21.2.81 - De +. date 25.1.83 - BL 8154320)

84.59 Barm inutors, designed for screening and cutting coarse materials entrainedin sewage flows(Op. 8.1.82 - Det. date 25.1.83 - BL 8250585 )

84.59 Button fastening machines, designed to attach buttons to cushionsor mattresses(Op. 20.8.82 - Det. date 25.1.83 - BL 8051028)

84.59 Carousel units, 4 station, designed to laminate insulating materialto moulded components of resin impregnated fibre(Op. 4.5.82 - Det. date 25.1.83 - BL 8252664)

84.59 Control systems automatic, molten metal head level, for use Inaluminium smelting(Op. 1.7.82 - Det. date 25.1.83 - BL 8057583)

removal of chemicals from waste water84.59 Controllers, discharge, for the25.1.83

by(Op.

suction process1.3.82 - Det. date - BL 8252399)

84.59

84.59

84.59

Laminating press line, single1.3.83 -

daylight short cycle(Op. 1.7.82 - Det. date BL 8153710)

Laminators designed todate

laminate dry- BL

film to circuit boards(Op. 19.9.81 - Det. 1.3.83 8159457)

Lens indexing machines, designed to automatically determine thepower of a lens, print the power on a packet and deliver both

packaging area(Op. 11.11.82 - Det. date 1.3.83 - BL 8256159)

84.59 Scrubbing machines, designed to lay a solution on the floor,scrub the floor and collect the dirty water

BL 8050860)

by means of asqueegee and

16.6.82vacuum motor

(Op. - Det. date 1.3.83 -84.59 Trouser turning machines

(Op. 16.8.82 - Det. date 1.3.83 -affixing

BL 8251723)84.59 Applicators, designed for drinking straws to the outsideof drink cartons

(Op. 9.7.82 - Det. date 1.3.83 - BL 8151067)

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

to a

Commonwealth of Australia GazetteNo. P 9, 22 April 1983 Consolidated By -law References (Part II 31


Column 3Column 1 Column 2

84.59 Arches and platforms, mobile, designed to be used In bricking 19rotary kilns(Op. 1.2.81 - Det. date 1.3.83 - BL 8330323)

84.59 Bending machines, spectacle frame, as used to form the nose bridge 19and lens(Op.

frame curves from plastic spectacle frame blanks21.9.81 - Det. date 1.3.83 - BL 8159121)

84.59 Buckets, fire fighting, collapsible, with electrically operated dump 19gate, designed to be used while suspended beneath a helicopter(Op. 22.9.82 - Det. date 1.3.83 - BL 8255440)

84.59 Cap rimming and lining machines, designed toBL 8256045)

rim metal caps and 19insert(Cp.

and form-

a seal ingdate

compound15.11.82 Det. 1.3.83 -

84.59 Chalking machines, designed for the application of fluidised chalk 19to cables(Op. 15.7.82 - Det. date 1.3.83 - BL 8253813)

84.59 Chip classifiers, designed for use in the analysis of wood chip 19size dining production(Op. 1.6.82 - Det. date 1.3.83 - BL 8253561

84.59 Cylinders, nitrogen die, designed1.3.83 -

to be used in the metal stamping 19industry(Op. 16.3.82 - Det. date BL 8252010)

84.59 Dud detectors, designed to detect and reject7851026)

faulty containers from 19a fiIling Ilne(Op. 23.6.82 - Det. date 1.3.83 - BL

84.59 Grinders, designed to automatically grind stereo rubber plates used 19in the printing

-industry

(Op. 1.9.82 Det. dat 1.3.83 - BL 8254909)84.59 Convergence guide assemblies, designed for use In the production 19

of biaxially oriented polypropylene film(Op. 16.9.81 - Det. date 25.1.83 - BL 8159075)

84.59 Deflashers cryogenic shot blast 19(Op. 7.9.82 - Det. date 25.1.83 - BL 8255972)

84.59 Die assemblies, non - adjustable, designed for theablow extrusion 19

of linear low density polyethylene film, having die dia inexcess of 100 mm(Op. 19.8.82 - Det. date 25.1.83 - BL 8254436)

84.59 Egg breaking machines, automatic 19(Op. 20.7.82 - Det. date 25.1.83 - BL 8254409)

84.59 Emptiers bag 19(Op. 18.12.80 - Det. date 25.1.83 - BL 8256049)

84.59 Engraving machines, computer controlled 19(Op. 21.9.82 - Det. date 25.1.83 - BL 8254936)

84.59 Blown film extrusion line with internal bubble cooling, but NOT 19including wind

-up and take off equipment

(Op. 11.11.82 Det. date 25.1.83 - BL 8061487)84.59 Extruders, planetary roller screw type

- BL19

(Op. 18.2.82 - Det. date 25.1.83 8251190 )

84.59 Mastics extruders, "Bonnot 4 inch" as manufactured by Compton d 19Knowles Corp, USA(Op. 1.11.81 - Det. date 25.1.83 - BL 8253167)

84.59 First aid dressing stripdate

manufacturing machines,8159850)

automatic 19(Op. 15.10.81 - Det. 25.1.83 - BC

84.59 Flux cored electrode manufacturing plant, being the fIll and closing 19station and the fill monitoring

datestations

(Op. 18.9.81 - Det. 25.1.83 - BL 8159150)

84.59 Inserting machines, automatic, designed to insert skewers into 19frankfurts meat, vegetables and the

- BLlike

(Op. 10.7.82 - Det. date 25.1.83 8253781 1

84.59 Insulating line, "Mail lefer type 12 ", designed to insulate copper or 19aluminium cable with polyethylene(Op. 14.9.82 - Det. date 25.1.83 - BL 8254813)

Commonwealth of Austral :a Ga:ette32 Consolidated By -law References (Part Ii Vo. P 9. J2 April 1983

TariffReference Description of GoodsColumn 1 Column 2

84.59 Profile laminating machines, designed toto

continuously apply resinimpregnated paper or similar materials shaped sections of timber,clipboard, hardboard or metal(Op. 2.11.81 - Det. date 25.i.83 - BL 81 601 80 )

84.59 Lens edging machines, automatic(Op. 13.8.82 - Det. date 25.1.83 - BL 8254371)

84.59 Luggin and compound applying machines, desigqned tp reform the wall ofmeal twist caps-

and the the inside with compound(Op 8.9.82 Det. date 25.1.83 - BL 8154913)

84.59 Grinding mills, rotary toothed disc type,8161384)

designed to grind rubber 19ggranules(Op. 2.10.81

Into powder- Det. date 25.1.83 - BL

84.59 Mixers, continuous, "Farrel" model 2 FCM 19(Op. 1.6.82

heads13.9.82

- Det. date 25.1.83 - BL 8254045)84.59 Mixing for reaction injection moulding machines 19

(Op. - Det. date 25.1.83 - BL 8254911)


Column 3

19

19

19

84.59 "MTI" type M400/K1600 mixers designed to mix PVC emulsion resins 19(Op. 30.3.82 - Det. date 25.1.83 - BL 8252204)84.59 Screen discharge continuous mixers with underwater pel Teti zer head 19(Op. 22.9.81 - Det. date 25. 1.83 - BL 81 59073 )84.59 011 ex p eIlers, continuous pressing "Hander" type 52 19

(Op. 10.9.81 - Det. date 25.1.83 - BL 8161108)84.59 Ribbon

basedpullers, designed for use in the production of polyethylene 19tapes of pesticide formulation

(Cp. 12.5.82 - Det. date 25.1.83 - BL 8254566)84.59 Rotary sand casting separators, designed to

8255485)

separate sand from hot 19castings after the casting process25.1.83 -(Op. 30.3.82 - Det. date 8L

84.59 Hydraulic starters, designed to start diesel engines having borediameters(Op.

of 70 mm to 160 mm7.12.81 - Det. date 25.1.83 - BL 8250203)

19

84.59 Target ranges, moving, "Stiga" models 43- 5127 -01 or 43- 5127 -02 19(Op. 20.11.91 - Det. date 25.1.83 - BL 8250213 )84.59 Chain

(Op.tensioners "MUrtfeldt Spann -Box" 191.8.82 - Det. . date 25.1.83 - BL 8057244 )

84.59 Terminating machines, designed for terminating ribbon cable or pre- 19notched cable to an insulation displacement connector(Op. 19.7.82 - De +. date 25.1.83 - BL 8253854)

84.59 Testing machines, for ascertaining the effects of weathering of materials 19madeand(Op.

for outside use by reproducing the action of sunlight and moisturetemperature changes in predetermined cycles

8255685)20.10.82 - Det. date 25.I.83 - BL

Commonwealth of Australia Ga:etteNo. P 9. 22 April 1983 Consolidated By -law References (Part I) 33

TariffReference

Col Linn 1

84.59

84.59

84.59

84.59

84.59

84.59

84.61

84.61

84.61

84.61

84.61

84.61

84.61

84.61

84.61

84.61

84.61

84.61


Col Limn 2

Tyre changers, motorcycle, manual,25.1.83

"FAIP" model8161357)

FISM(Op. 27.11.81 - Det. date - BL

Vulcanising machines, "Shaw Rotocure ", but NOT including wind up orlet off equipment(Op. 8.7.82 - Det. date - 25.1.83 - BL 8253688)Coil winders designed to coil

25.1.83 -plastic hose as it is extruded

(Op. 29.10.81 - Det. date BL a250384)

Wrapping machines designed to cover metal jewellery boxes with aheat(Op.

sensitive material23.4.82 - Vet. date

NOT

25.1.83 - BL 8052908)

Blow moulders but includingparts

deflashing and punching stationswhich do not form integral of the

BLmoulders

(Op. 3.8.82 - Det. date 1.2.83 - 8256772)

Polletizers(Op. 28.7.82

plastic strand having a capacity fo 600 kg /hr or more- Det. date 12.83 - BL 8254191)

Element and poppet assemblies, consisting of a brass pressing fixedto a sealed copper cup

thecontaining an expanding wax element,

designed for use in manufacture of automotive engine thermostats.(Op. 2.9.82 - Det. date 1.3.83 - BL 8254655)Aerosol valves, designed for use on

diametercontainers having a

or lessmetal

ferrule or mounting cup with a of 22 mm(Op. 1.3.83 - BL 8330217)

Aerosol valves having a delivery of 2 ml. or 5 ml. per actuation(Op. 1.1.83 - Det. date 1.3.83 - BL 8250446)Ball check valves, tank venting designed for use in the constructionof marine vessels, exceeding 100 tonnes

BL 8254139)(Op. 1.8.82 - Det. date 1.3.83 -Ball valves, +ro way having port sizes of less than 8 mm and aworking pressure of 50 MPa or more(Op. 9.8.82 - Det. date 1.3.83 - BL 8254380)Christmas tree assemblies, dual string(Op .7.1O.81 - Det. date 1.3.83 - BL 8159797)

Valve assemblies, gas type 8 7071.3.83

001- BL

or water type 8 707 002(Op. 27.9.82 - Det. date 7861447)

Manifold mounted check valves, sandwich or flange type, capable ofpressures of

21.6.8231.5 MPa or more

22.2.83(Op. - Det. date - BL 6253443)

Valve connection blocks (alsoadaptor blocks) incorporating

Hydac models VAB 10HHydac models VAB 10LHydac models VAB 6HHydac models VAB

models LV6,6L

Rexroth LV10 or LV1 6NOTE:

Additional brand names and model numbers willBy -lawlist on receipt of a submission to the

of(Op.

Customs4.11.81 - Det. date 22.2.83 - BL 8256851)

Pilot operated safety relief valves "AGCO" types 903608FA,961 210F

930810FÁor 961212FA93101 2FA, 931216FA or vacuum

22.2.83 -valves "AGCO" types

(Op. 20.10.82 - Det. date BL 8254940)

"Newline" radiator valves in both 12.7 mm and 19.05 mm sizes, types188, 195, 189 or

Det.196

(Op. 1.3.81 - date 1.2.83 - BL 8154905)

Pressure regulators, manufactured by by 00 Inc, as follows:(a) Pressure reducing regulators R-2, FR-5, PR -7, FR-10,

Fit -15, FR -55, LBR -15 cr MR;(b) Cylinder regulators Model C11_ -20 or CYL -21;(c)(d)

Steam heated regulators Model HFR (Steam); orElectrically heated regulators Model HFR -2 (Electric)

(Op. 26.5.82 - Det. date 22.2.83 - BL 8252997)

known as manifold or valve interfacean integral filter, as follows:

be added to theBranch, Bureau


Col unn 3

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19Models

34 Consolidated By-law References iPort /ICommonwealth of Australia Gazette

;Vo. P 9. j2 April 1983

TariffReference

Column 1

84.61

ItemIdity

andDescription of Goods Val DateColumn 2 Column 3

Spray foam units, detergent "Dana" Model 293, consisting of thefollowing:(a) Main centre units;(b) Valve controls for foam;(c) Mend hand piece extensions

(Cp. 1.9.82 - Det. date 22.2.83 - BL 7959223)84.61 Sprinklers, fire, automatic, that turn on at the outbreak of fire,

automatically turn off when the temperature drops to a safe level andwill reactivate should fire outbreak re -occur(Cp. 26.5.80 - Det. date 22.2.83 - BL 8056479)

19

19

84.61 Suction valve plates for oxYgen canpr essors 19(Op. 13.9.82 - Det. date 22.2.83 - BL 8254868)

84.61 Thermostatic gasroam

valves, 'Honeywell' Models V51 55A or V5155B, designed 19for use on heaters, wall furnaces, duct heaters and hot waterboilers(Op. 1.10.81 - Det. date 22.2.83 - BL 8161253)

84.61 "Thinking Cap" thermostatically responsive ventilating units,unassembled(Op. 5.4.82 - Det. date 22.2.83 - BL 8252257)

84.61 Beer keg adaptor valves or extractor valves to Australianbeer or

Patents285/376 designed for filling kegs with draught dispensingdraught beer(Op. 11.10.82 - Det. date 22.2.83 - BL 8330617)

19

19

84.61 Couplings, "Roylyn ", designed to interface between aircraft and ground 19support equipment(Op. 3.9.82 - Det. date 25.1.83 - BL 8254690)

84.61 Dust valve components being disc seats and "Y" packing rings for 300 mm 19dust valves, designed for use in controlling dust emission in bell -lessblast furnaces(Op. 6.9.82 - det. date 25.1.83 - BL 7955341)

84.61 Air valves, automatic, mechanical toggle type, designed for use In 19the manufacture of air motors(Op. 26.8.82 - Det. date 25.1.83 - BL 8052661)

84.61 Continental "Meter Matic" series A6000 or A6500 flow control units 19complete, with manifolds or flow25.1.83

regulators therefore(Op. 22.7.52 - Det. date - BL 8058812)

84.61 Delivery valves for oxygen piston conpressors designed for use in 19conpressing(Op. 7.7.82

oxygen- Det.

in the manufacture of steeldate 25.1.83 - BL 8254960)

84.61 Multi -plate type suction or25.1.83

discharge valves designed for use in 19air(Op.

compressors1.6.82 - Det. date - BL 7851976)

84.61 Multi type valve kits for single25.1.83 -

opening L.P. gas vessels for 19autmotive application(Op. 1.8.81 - Det. date BL 8157606)

84.61 Rotary control valves, designed for use inkWthe manufacture of air 19motors

(Op.with ratings from 3.73 kW to 29.83

1.8.82 - Det. date 25.1.83 - BL 8255610)84.61 Safety shut -off valves, designed for the automatic shut -off of gas 19supply in the

for

event of any break in electric power or safety circuit(Op. 18.12.80 - Det. date 25.1.83 - BL 8150455)

84.61 Beer keg/376,

adaptor valves or extractor valves to Australian Patents 19285 designed for filling or- BL

dispersing draught beer(Op. 11.10.82 - Det. date 25.1.83 8250553)

84.61 Direct acting magnet valves, Westinghouse part No. 0.76286/7,designed use

ideas e component for assembly of complete wheel slide andwheel spin/sl control units for installation on passenger rail cars(Op. 1.4.82 - Det. date 25.1.83 - BL 8251767)

84.61 Hydraulic directional control valves, having a flow capacity of 378.5L /min or1.9.82

greater and a max pressure of 13.8 Mpa or greater(Op. - Det. date 25.1.83 - BL 8061528)

84.61 Hydraulic recycling valves(Op. 8.7.82 - Det. date 25.1.83 - BL 8253717)

19

19

19

Commonwealth of Australia Ga:etteNo. P 9, 22 April 1983 Consolidated By -law References (Part 11 35

Tariff Item andDateReference Description of

Column 2

Goods Val idityColumn 1 Column 3

84.61 Modular valves designed for hydraulic fluid power use as pressure 19or flow control devices(Op. 1.6.82 - Det. date 25.1.83 - BL 8251263)

84.61 Pressure reducing valves suitable for pressure8253705)

up to 35 MPa, designed for 19use in hydraulic systems(Op. 7.7.82 - Det. date 25.1.83 - BL

84.61(Op. 25.6.82e KOct. datte 25.1.83 - BLO)L52206311 valves 19

84.61 Hydraulic spool type directional valves, designed for use in the assembly 19of hydraulic power steering for

25.1.83 -heavy duty trucks

(Op. 25.3.82 - Det. date BL 8055423)

84.61 Single gauge29.6.82

isolator- Det.

valves designed for use in hydraulic systems 19(Op. date 25.1.83 - BL 8256227)

84.61 Refrigeration water valves, designed for use In commercial or 19Industrial refrigeration or freezing plants, having a max workingpressure of 1000 kPa`Op. 1.3.82 - Oet. date 25.1.83 - BL 82514801

84.61 Regulating and overspeed trip valves, designed for use in shutting 19off steam supply to a turbine(Op. 10.6.82 - Det. date 25.1.83 - BL 8253291)

84.61 Waterbed valves, PVC body, polyethylene insert and polypropylene cap, 19designed for use in the manufacture of waterbeds(Op. 12.3.82 - Det. date 25.1.83 - BL 8251879)

84.61 Flow dividers, hydraulic circuit 19(Op. 17.3.81 - Det. date 1.2.83 - BL 8330079)

84.61 Pilot assisted overcentre valves with workingBL 8330086)

pressures up to a maximum 19of(Op.

34.47 MPa21.6.82 - Det. date 1.2.83 -

84.61 Relief valves, hydraulic, sandwich and flange mounted, capable of 19pressures up to 35

Det.MPa

(Op. 8.7.82 - date 1.2.83 - BL 8253718)84.61 Heated valve seats, complete with electrical heating element, designed 19

for sealing blast furnace valve(Op. 28.9.82 - Det. date 1.2.83 - BL 8255054)

84.63 Propelnumbers

transmissions for P & H-1-

electric mining shovels, part 19100J3944 -1 and 10033668

(Op. 11.5.82 - Oet. date 1.3.83 BL 8252951 )

84.63 Transmission parts to which 84.63.22 84.63.23 or 84.63.9 applies, 19being parts

Schedulefor complete goods to which if imported, Item 19

in 4 to the Customs Tariff would apply, by virtue of aby-law or

1.3.83determination made under Part XVI of the Customs Act

(Op. - BL 8330514)

84.63 Cutless rubber bearings, water lubricated 19(Op. 1.6.82 - Det. date 22.2.83 - BL 8055988 )

84.63 Axle assemblies, "John Deere" A042, AN 428254646)

19(Op. 1.7.82 - Det. date 22.2.83 - BL

84.63 Disc harrow bearings, "Fafnir" series 209 or 211 19(Cp. 10.8.82 - Det. date 25.1.83 - BL 8254229)

84.63 Sealed ball bearing cartridges comprising a cylindrical bored inner 19race and an outer race either part spherical on outside diameter, orcylindrical outer diameter for real Ilent mounting in

and/or shockhousings, such

that the whole assembly prov ides sel f centring absorbingcharacteristics(Op. 1.10.82 - Det. date 25.1.83 - BL 8059986)

84.63 Permanent magnet couplings,reelers

designed for the control of power 19transmission to-

cable(Op. 13.9.82

couplings ofDet. date 25.1.83 - BL 8254836)

84.63 Shaft a kind used for connecting hydraulic pumps to 19flange mounted electric motors(Op. 1.5.82 - Det. date 25.1.83 - BL 8053837)

84.63 "Flottweg" cycle gearboxes, sizes 4, 5, 6, 7 or 8 19(Op. 1.5.82 - Det. date 25.1.83 - BL 8064037)

Commonwealth of Australia Gazette36 Consolidated By -law References (Part 11 No P 9 22 April 1983


84.63

84.63

84.65

84.65

84.65

84.65

84.65

84.65

84.65

85.01

85.01

85.01

85.01

85.01

85.01

Hydrostaticaticcc-

an missions, being axle drive units, "Linde"KA

15.5.81 - Det. date 25.1.83 - BL 81 55611 )Trarmfssion parts for the

25.1.83repair or maintenance of cameras90.07.9 or 90.08.9 applies

(Cp. 1.1.83 - Det. date - BL 815 8531 )

Hub to shaft connectors with integral I kin capability(Cp. 23.4.81 - Det. date 1.3.83 - BL 83300218'Caliper assemblies, being industrial disc brakes(Cp. 15.6.81 - Det. date 2 5.1 .83 - BL 81 56444 )

Hydraulic cylinders, swivel piston, designed to swivelpress for straightening rails(Op. 10.8.82 - Det. date 25.1.83 - BL 8254323Diaphragm, bellows or lifetime type oil seals of a kindearthmover track rollers, idlers, sprockets and the likeand(Op. 1.7.82

agricultural machinery- Det. date 25.1.83 - BL 8060652)

Dual face oil seals, consisting of matching sealing ringswithlapped

rubbertoor

ensuresimilar

positive sealing at mating surfacessealing members of a

likekind used on earthmovingrollers, Idlers, sprockets and the for earthmoving

machinery(Op. 1.10.82 - Det. date 25.1.83 - BL 7957576)011 seals for propellors, Volth Schneider types, as follows:Type Outside DiaBA Fg 145 /180 mmBA Fg 170/200 mmBABA

FgFg

190/225 mm240/270 mm

BA Fg 300/340 msBA 205/250 mmBAU 7 190/225 mmBAU 7 21 5/2 50 mm

1 70 /210 mm5/2

(Op. 18.3.82 - Det. date125.6.83m- BL 8251958)

"Scotseal" type oil seals, designed for use with oil bathwheel bearings(Op. 1.11.82 - Det. date 25.1.83 - BL 8060683)Motor/ generators comprising 1192 kW

todiesel engines with

generator units attached, designed supply electrictydump trucks(Op. 1.11.62 - Det. date 1.3.83 - BL 8255520)Holders carbon brush, "MCR GAN"

1.3.83brand, designed to hold

motorscarbonbrushes on to the face of commutators on

BLelectric(Op. 21.9.82 - Det, date - 8058865)

Phase shifting transformers for adjusting the phase anglefactor in alternating current circuits(Op. 14.10.82 - Det. date 1.3.83 - BL 80 61 021 1Battery chargers,

suitable forconsisting of a cabinet incorporatingsupply, charging ANY of the following nickelor dry cell batteries, either singly or in multiples:

D size C size A.A. size AAA size, 6 V or 9 V(Op. 12.10.82 - 6et. date 22.2.83 - BL 8330360)

AC watercooled flameproof motors 37 kW to 140 kW conformingSAA specifiction 2480, manufactured by Reliance

kW,

designed for use in underground miner cars and shuttle(Op. 21.7.82 - Det. date 22.2.83 - BL 8256732)DC motors 12 V, horizontal /vertical cycle, designed formotor vehicle side view mirror remote control mechanismsuse otherwise than in the manufacture of motor vehiclescompliance with the Governments motor vehicle plan(Op. 13.7.82 - Det. date 22.2.83 - BL 8253819)

models

to which

anvils on a

used onfor earthmoving

which areor without

trackand agricultural

Thickness

3 mm3 mn5 mm56

mmmm

6 mm6 mm6

20mmmm

20 mm

type

GTA 22 ACto power

or power

a powercadmium

toUSA,

cars

use in

forin

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

2018 KA(Op.

Commonwealth of Australia GazetteNo. P 9, 22 April 1983

Consolidated Br -law References (Part l) 37

TariffRe ference

Column 1


Item andValidity DateColumn 3

85.01 Convertors and generators with a frequency output of 200 Hz and asafety voltage of 48 volts, designed for use with external andinternal vibrators for masonry(Cp. 4.11.81 - Det. date 25.1.83 - BL 8160522)

85.01 Frequency changers, rotary, 350 kVA, 50/25 Hz; motor - induction 8 pole,300 kW 750 rpm, 415 V, 3 phase; generator - synchronous, 4 pole, 350kVA, 2350 V, 25 Hz, single phase, 0.7 pf(Cp. 1.9.82 - Det. date 25.1.83 - BL 8254400)

85.01 AC Induction motors of the fol lowing types:- Vertical shaft flange mounted squirrel cage;Horizontal shaft flange mounted squirrel cage;Slipring induction motors,as fol lows:Poles Configeration

2 pole4 pole6 pole

pole8

10

14 pole and over(Op. 25.1.83 - BL 8255766)

Rate

or

d Output Exceeding350 kW560 kW400 kW300 kW220 kW150 kWNo I Im it

85.01 AC induction motors, squirrel cage 6 to 8 pole,kW at

dual6 pole

speed withcontinuous max ratedDet.

output exceeding 250 speed(Op. 27.8.82 - date 25.1.83 - BL 8254555)85.01 Motors, DC, with reduction 6 V - 24 V torque 25 -150 nMn, with integrated

system(Op. 11.ií. 80 Det.date

applications25..- ). 8254755

Quire a driving

85.01 Outboard motors 12 V DC up to and Including 0.75 kW output power(Op. 25.1.83 - BL 8255803 )85.01 SIIpring induction motors three phase AC, output from 185 kW to560 kW 4 or more poles, 1 000 to 1

BL100V 50 Hz(Op. 18.5.82 - Oct. date 25.1.83 - 8252922)

85.01 Power supplies having an outputoutput

of 240 V AC at 60 Hz and 0.45 Acontinuous, or having an of 22 V DC to 24 V DC (both inclusive)at 5 A max1.9.81(Op. - Det. date 25.1.83 - BL 8158029)

85.01 Stators andkW

rotors, designed for use in submersible motors 1.491 kWto 149.2(Op. 1.12.81 - Det. date 25.1.83 - BL 8158290)

85.01 Toroidal frequency interference suppression coils, current rating of2A to 60A inductance greater than 40 Micro Henries and core saturationgreater then 10 K Gausse at 100 Oesteads for use in light dimmingcircuits(Op. 16.2.81 - Det. date 25.1.83 - BL 8152051)

85.02 Permanent magnets, ceramic, designed for use

8057257)

in the process of wetOp. 1.8.821- Det.mdateg25.1.83r- BL

85.03 Batteries cadmium - nickel cells 1.2in 06

V, to Austral ian standardS.A.A. 2275, designed for use methanoneters for coaland shale mining(Op. 8.10.82 - Det. date 1.3.83 - BL 82554111

85.04 Battery containers andbatter lids designed for use in the manufacture of:(a) lead acid les having an electrical capac ity at the tenhour rate from 50 to 2100 ampere hours

(b) lead acid pasted standby -ells having an electrical capacityat the ten hour rate greater than 900 ampere hours(Op. 4.6.81 - Det. date 1.3.83 - BL 81 56102 )85.05 Parts as follows, for the manufacture or repair of hedge trimmers:(a) Ball handles;

(b) Cover plates;(c) Gear case sub - assemblies;(d) Housing assemblies half;(e) Housing covers, half;(f) Mounting plates;(g) Shields

(Op. 1.10.81 - Det. date 18.1.83 - BL 8251512)

19

19

19

19

19

19

19

19

19

19

19

19

19

19

--

Dot

38 Consolidated Bi -law References ( Part !)Commonwealth of Australia Ga:ette

Vo. P 9, 22 April 1983

TariffReference

Column 1

85.05

85.05

85 .08

85.09



Column 3

Hacksaws, reciprocating, having cutting capacities as follows:(a) for metal

metalpipes up to and including 325 mm dia;

(b) for profile shapes uo to and including 270 mm height(Op. 23.12.81 - Det. date 25.1.83 - BL 8250502)Saws having a reciprocating blade mounted on a free

textiles- floating swivel,

designed to cut sheet materials other than(0p. 25.1.83 - BL 8256050)Glow(Op.

plugs11.11.82 - Det. date 25.1.83 - BL 8256032)

Driving lamp, fog lamp and headlamp inserts, as follows:(a)(b)

Sealed beam units;Semi - sealed beam snits consisting of lens, reflector andand bulb holder,

for use otherwise than in the manufacture of motor vehicles incompliance with the Governments Motor Vehicle Plan

8256193)(Op. 1.10.81 - Det. date 25.1.83 - BL85.10 Underwater lamps, designed for use at depths

8255963)exceeding 50 m

(Op. 1.7.82 - Det. date 22.2.83 - BL85.10 Torches, railway signalling, "Saft Captain" GS, 2 cell three position

(red, green and white) and beam.(Op. 27.7.82 - Det. date 25.1.83 - BL 8064101)

85.11 Trackers(Op.

seam, designed for use with welding or cutting systemsi9.1.82 - Det . date 22.2.83 - BL 8056876 )

85.11 Welding machines, T butt automatic, designed to produce wire framedlampshades(Op. 12.8.82 - Drat. date 22.2.83 - BL 8254326)

85.11 Flux recovery22.7.82 -

units, automatic "Ogden" model D.266(Op. Det. date 25.1.83 - BL 8253896 )

85.11 Chemical lens hardening ovens25.1.83(Op. 16.1.81 - Det. date - BL 8151023)

85.11 Heat sealing machines, "Sentinel" model 1212 ASL(Op. 14.4.82 - Det. date 25.1.83 - BL 8252385)

85.11 Orbital tube welding systems Model "R" Super Dragon, but NOT includingpower source(Op. 4.10.82 - Det. data 25.1.83 - BL 8061 565 )

85.11 Pipe welding head and control systems, manual or automatic,programmable, "Magnatech Series 400 ", but NOT including power(Op. 1.8.82 - Det. date 25.1.83 - BL 8156120)

85.12 Hair setting appliances, domestic, consisting of heater unit,heat rollers and roller clips(Op. 1.1.83

Elements,

- Det. date 22.2.83 - BL 82562311

85.12 electric cartridge, with high density heating and inbuiltthermocouples for hot tip bushing systems for runnerless moulding(Cp. 1.6.82 - Det. date 25.1.83 - BL 8253328)

85.12 Cartridge heaters with thermocouples, designed for use with Infectionmoulding(Op. 1.1.83

machines- Det. date 25.1.83 - BL 8161288)

85.13 Autodiallers, telephone, model hE 32DP manufactured by HasegawaElectric Co Ltd Japan(Op. 30.6.82 - Det. date 22.2.83 - BL 8254237)

85.13 Computer terminal voice response22.2.83

units(Op. 16.4.82 - Det. date - BL 8252603)85.13 Headphone adaptor, designed to raise the signal voltage

polarising voltage to the levels required to driveheadphones fran the output of an amplifier(Op. 1.3.82 - Det. date 25.1.83 - BL 8252384)

(Combination)

source

and provide aelectrostatic

85.13 Multiplexers being Meganux" models TDM 1257 or TOM 1258, asmanufactured by

- Det.General Data Comm, USA

(Op. 10.5.82 date 25.1.83 - BL 8252751)

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

85.13 Port Selectors, Micah M600 as25.1.83

manufactured by Micah8254543)

Systems Inc., USA 19(Op. 1 .10.81 - Det. date - BL


TariffReference

Col unn 1

85.13

85.13

85.14

85.14

Description of GoodsCol unn 2


Column 3

Transmissionsystems type

equipment sound program, with carrier

7957585)

program channel542022 A401 -A 1

(Op. 23.7.82 - Det. date 25.1.83 - BLTelex Machine Exchange, fully electronic, computer controlled, AXB20stored programme(Op. 1.12.82 Det. date 1.3.83 - BL 8254962)

Audio frequency mapiifiers esigned for use in underwaterAudio frequencytelecanmunications equipment(Op. 2.3.82 - Det. date 25.1.83 - BL 8251536)Public address systems, portable, self contained, AC/DC operated(Op. 5.8.81 - Det. date 25.1 .83 - BL 8157892)

85.15 HF radio and navigational aid apparatus approved as suitable forinstallationof the

on(Radio)

compulsorily fitted vessels pursuant to regulation 9navigation Regulations, but NOT including ANY of the

following: If AM and SSB transceivers up to 100 W AM, or up to150 W FE SSB aerial inputs(Cp. 1.3.83 - BL 8330088)

85.15 Splitters /inserters designed for use with closed circuit videoequipment(Op. 23.11.82 - Det. date 22.2.83 - BL 8256162)

85.15 Terminals, radio paging,telephone

designed to receive Inputs direct fromsubscribers via trunk lines, local or remote computers orvideo display terminals and reformat for transmission over multipletransmitters to paging receivers(Op. 15.10.82 - Det. date 22.2.83 - BL 8255225)

85.15 Marine transmitters typesthedate

Salvor 3 or Salvor 4 main andCo

reserveLtd, EnglandMF, manufactured by Marconi International Marine

(Op. 21.6.82 - Det. 22.2.83 - BL 8253423)

85.15 Accessories, as listed In the Table hereunder, for Hitachi camerasTHE TABLE

H DETAIL /MANUAL WHITE UNITH CETAIL /AUTO WHITE UNITVERTICAL ENHANCER UNIT

GEN LOCK UNIT

EXTENSION BOARDS

SYNC UNITPAL B LNI TLENS CABLE KIT

Designed forn n

use withII n

n n nn n n

n n n

II n n

IF n n

n rr

n n

A S U KIT (AUTOMATIC SET UP) -

CME UNIT

MASKING UNIT(Op. 1.2.82 - Det. date 25.1.83

n n

- BL 8250875)

Camera Model DK5000DK5000

Models DK5000"FP60 FP21 FP22Models DK5000,

FP60" Models DK5000,n Model FP60" Model FP3060" Models FP21,

FP22" Models FP21,

FP22" Models FP21,

FP22Model FP60n

85.15 Cassette players22.3.82 -

incorporating lift -out AM/FM tuner8252767)

packs(Op. Det. date 25.1.83 - BL

85.15 Two tone alarm generators complying with both Department of Communications(Radio)Specification RB 239 and the Third Schedule to the Navigation

Regulations(Op. 21.2.82 - Det. date 25.1.83 - BL 8251736)

85.15 Video charactermessages,

character

generating systems designed to compose and generate alpha-numeric each system comprising:

generator,font composer,

but not including keyboards8254560)(Op. 25.1.83 - BL

85.15 Prompting devices,rollers;

television, being ANY of the following:CaptionOn- camera prompters;Portable prompters;Script drive units

Det.(Op. 6.8.82 - date 25.1.83 - BL 8254248)

85.15 Radio link8.6.82 -

equipment, portable, UHF, but NOT including antennae(Op. Det. date 25.1.83 - BL 8057695)

19

19

19

19

19

19

19

19

19

19

19

19

19

19

_

_

nn

n

_ n

-

_ "

^

40 Consolidated By -law References (Part 1) ,Vo. P 9. 22 April 1983

TariffReference

Column 1



Column 3

85.15 Squelch systems, continuous tone controlled, employing a250.3

continuouslyadjustable tone over the frequency range 67.0 Hz to Hz(Op. 14.12.81 -Det. date 25.1.83 BL 8250473)

85.15 Synchronizers, digitalDet.

television field(Op. 25.2.82 - date 25.1.83 - BL 8251390)85.15 Transponder systems consisting of transponders and interrogators,designed to locate and

dateids of moving [C stationary objects(Cp. 4.10.82 - Det. 20.1.83 - BL ß255T60)

85.17 Alphanumeric display boards, being microcomputer controdisplay billboards capable of displaying plural messageuse(Cp

of floppy discs or from other inputsBL 8256177)30.3.82 - Det. date 25.1.83 -

85.17 Bearing damage monitoring and alarm equipment, designed for checkingfaults and defects in bearings and bearing units(Op. 1.4.82 - Det. date 25.1.83 - BL 8251452)

Iled multiplepatterns by the

85.17 Information sand visual diprogram ab I eairports, busnumeric and s(Op. 13.4.82

ystems incorporating a dedicated computer with keyboardsplay, central control unit and display boards showingcomputer controlled information designed for use interminals or railway stations to indicate in alpha,

ymbols, arrival, departure and associated information- Det. date 25.1.83 - BL 8156273)

85.17 Warning systems, microprocessor controlled, designed to warn, by bothaudible and visual

- Det.means track maintenance crews of approaching trains(Cp. 1.6.82 date 25.1.83 - BL 8252689)

85.18 Paper dielectric capacitors impregnated with mineral oil,capacitance of

1.10.82 -0.12 mfd at 250 V

(Op. Det. date 1.3.83 - BL 8060422)85.18 Reprographic capacitors, non poly - chlorinated biphenol, having voltage

ratings exceeding 1 000 V AC25.1.83(Op. 30.3.82 - Det. date - BL 8256662)

85.19 Circuit breakers, 33 kV or 36 kV for indoor use under security(Cp. 1.3.83 - BL 8330785)

85.19 Pushbutton switcheson printed

fitted with terminals designed for directmounting circuit boards

1.3.83 -(Op. 14.11.80 - Det. date BL

Co.,

8330330)85.19 Remote electronic load limit switches, type

USAELS /50 as manufacturedby Warner

25.11.81Electric Brake E Clutch

(Op. - Det. date 1.3.83 - BL 8161101)85.19 Cards printed circuit numbers

(Cp. 14.7.82 - Det. date 1.3.8385.19 Coax is l cable connectors

or greatersul tab le

diameter 28mm(Op. 1.8.81 - Det. date 1.3.83

IC3600 SFCD-B8056875)

or IC3600 LSSA1- BL

for use with he! fax cables of- BL 81 55858 )

85.19 Switches providing individual channel access for testing PC14and FDM telecommunications systems(Cp 1.5.82 - Det. date 1.3.83 - BL 8252939)

85.19 Geared(Op.

limit switches, types VA, 948 or BIC27.7.82 - Det. date 15.2.83 - BL 8053480 )

85.19 Circuit breakers, AC or DC, thermal current rating not exceeding 5A(Op. 22.2.83 - BL 8330095 )

85.19 Circuit breakers, DC, air break, 300 A to 12000 A continuous currentrating, 600 V to 3Det.

000 V(Op. 7.5.82 -

equipment,date 22.2.83 - BL

double

7959931 )

85.19 Collector current, type, 600 A, 600 V continuouslyrated copper3.6.8 alloy, designed for use

- BLwith coke oven charging cars

(Op. - Det. date 22.2.83 8253283)85.19 Connector blocks designed for use with submersible electric motors

(Op. 1.1.83 - Def. date 22.2.83 - BL 8256722)85.19 "Littlefuse" fuses being series: 255 256 262 265 266 267, 268, 269,272, 273, 274, 275, 276, 277,

22.2.83278, 2`19, 280, 281, 282, 284 or 334(Op. 4.1.83 - Det. date - BL 8330084)

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

Commonwealth of Australia Ga:ette.No. P 9. 22 April 1983 Consolidated By -law References (Part !) 41

TariffReference

Column 1

85.19

85.19

85.19

85.19

85.19

85.1 9

85.19

85.19

85.19

85.19

85.19

85.19

85.19

85.19

85.19

85.19

85.19

85.19

85.19

85.19


Itemity

andVal id Date

Col unn 3

Programmable controllers and sub - assemblies and accessories therefor, 19designed for use in the manufacture of industrial process controlsystems NOT being numeric (NC) controls(Op. 1.9.62 - Det. date 22.2.83 - BL 8330536)Relay test

-systems, 'Canbitest RK 92 -11E', as manufactured by Asea, 19

Sweden(Op. 8.10.82 Det. date 22.2.83 - BL 8057402)Capillary tube and bulb sensor type thermostats, fixed temperature, non 19adjustable manual reset(Op. 1.4.82 - Det. date 22.2.83 - BL 8252030)

Thermostat switches, rated current 10 A, rated voltage 250 V AC, 19incorporating stepped regulation of heat output(Op. 4.5.82 - Det. date 22.2.83 - BL 8060744)

Voltage dividers with a circuit containing one or more decades 19of precision fixed resistors and an interpolating potentiometer forboth DC and AC operation(Op. 1.1.83 - Det. date

to

22.2.83 - BL 82560661

Adaptors(Op. 11.8.82

designed connect a25.1.83

television camera and microscope 19- Det. date - BL 8254274)

Attenuators, models LA1, LA2, LA3 or LA4 as manufactured by Leader Radio 19(Op. 1.9.81 - Det. date 25.1.83 - BL 815876)Appliance connectors, 2 and 3 pole, with earthing contact for

DINreference 19

voltages up to 250 V AC /300 V DC and 380 V AC /450 V DC to 43650(Cp. 1.10.81 - Det. date 25.1.83 - BL 8251458)Controllers, complete with drive monitoring gear, as used for overwind 19and overspeed

15.6.82protection of mine winders

(Op. - Det. date 25.1.83 - BL 8253437)Programmable refiner controls, designed for use with paper pulp finishing 19machinery(Op. 18.8.81 - Det. date 25.1.83 - BL 8253347)Remote control panels for video and audio routing switchers of a matrix 19size greater

3.5.82than

- Det.ten inputs and three outputs (10x3)

(Op. date 25.1.83 - BL 8252633)

Fuse plugs silized, series 5SD4, 5SD5 and 5SD6 19(Op. 9.6.82 - Det. date 25.1.83 - BL 8053730)Fuses as follows:

(i) Fast acting fuses 550 V, 500 A, having an interrupt current of 19100 kA; or(il) Trip indicator fuses 500 V, IA

(Op. 1.12.81 - Det. date 25.1.83 - BL 8250638)Lampholders, floodlight, 70 kV 19(Cp. 1.1.82 - Det. date 25.1.83 - BL 8155859)Battery isolators, designed -ho isolate several batteries during recharging 19by one alternator(Op. 1.4.82 - Det. date 25.1.83 - BL 8150368)Relays of the low profile type, other than reed relays, of a kind used 19for printed circuit mounting:

(a) with a heightheight

not exceeding 21.24 mm; or(b) with a not exceeding 35 mm and a continuous contact rating

of not25.1.83

less than 8 A AC(Op. - BL

modules,

8253832)

Safety electronic, designed for use with hydraulic drop hammer 19foot switches(Op. 16.7.82 - Det. date 25.1.83 - BL 8253814)Mating sockets, "Analog Devices Inc" AC series 19(Op. 30.11.82 - Det. date 25.1.83 - BL 8252236)Electrical safety stop switches, steel cased twin lead, capable of

underground19

breaking D.C. currents under load, designed to be used onelectric locomotives(Op. 24.8.82 - Det. date 25.1.83 - BL 8060253)Limit switches, Fisher 568 -018 -010 19(Op. 13.5.82 - Det. date 25.1.83 - BL 7950987)

42 Consolidated By -law References (Part !)Commonwealth of Australia Gazette

Vo. P 9, 22 April /983

TariffReference

Column 1

85.19

85.19

85.19

85.19

85.19


Pressure operated keyboard switches or switching systems being 19"Tip" type as manufactured by Oak-

Industries Inc., U.S.A.(Op.15.4.82 - Det. date 25.1.83 BL 8256275)Roter switches double break changeover in excess

8256742)of 750A(Op. 221.9.82 - det. date 25.1.83 - BL

Solid(Op.

state AC power switches1.3.82 - Det. date 25.1.83 - BL 8250589)

Thermal switches, adjustable, designed for use in thermal-1c automotivecooling fans(Op. 10.12.81 - Det. date 25.1.83 - BL 8250008)Plugs test and universal test blocks for relay and meter testing 19(Cp. 1.6.82 - Det. date 1.2.83 - BL 8051628)

19

19

19

85.19 Potentiometers, but NOT including wire wound potentiometers havinga power(Op.

rating of 1 W to 100 W1.3.82 - Det. date 1.2.83 - BL 8251327)

85.19 Programmable controllers and sub - assemblies and accessories therefor,for the following program able control systems:

Allen Bad ley Min -PLC -2 PLC -2/20, PLC -2, Mini- PLC -2/15, PLC -30,Bulletin 1774 PLC, PLC-3;

ASEA -PLC 700;BoverfBrown Procontic DP800, Indactic 61;Cutler Hammer D120;

Durant 6500 -450;Eagle Signal Eptak 200, 700, FM50 seriesGeneral Electric Series Six, Logltrol 500, Logltrol 550, Logltrol 400;Gould Mod icon 184, 384, 484, 584, 1084, Micro 84, 2184;Hitachi C -24, C-40A P -120 P -250 P1000; S64, S32, C64;Honeywell Director 1001, 3001 4061;IndustrialSolid State Controls Inc ipc 90,300;ITT Director 2000 Deputy Supervisor;Klockner - Moeller Sucos PS22, PS24;Landis and Gyr series PCAI PCA2, PCA1 1, PCA12;Mitsubishi Mel sec series, 1lelplac series;Nissan NESP;Omron Sysmac FO, PI, P7, FOR M1 PSR;Reliance Electric Automate 38 31L;SiemensSimatic S3, S5, S5-21óA, CSprecker and Schuh Sestep sales 400, 500, 530;Square D Class 8881, Class 8884, Sy /Max;Struthers Dunn Inc. 1001, 3001 4001;Telemecanlque TSX21, TSXÓO TSS(80, TSX90;Texas Instruments series 5f I, EMT, FM550, 7MT, 510, 8PC, VPU, VPJ 520

VPU 530Westinghouse Numalogic PC700

1.2.83FC900;(Op. 19.8.81 - Det. date - BL 8330223 )

85.19 Programming(Op. 1.2.83 boards matrix, and programming pins therefor

- BL 8255752 )

85.21 Solar cells designed fortracks on motion picture(Op. 1.9.82 - Det. date 1.film3.83

85.21

85.21

85.22

use in the reproduction- BL 8255032)

TransmItters, fibre -opticdate(Op. 22.3.82 - Det.

Modulers analogue signal(Op. 30. '9. - Dot. date

1.3.83 - BL 8251 986 )

conditioning em Iffier25.1.83 - BL 81 59520 )

of optical sound

type

Signal generators for the adjustment of white8330294)

balance of TV colourmonitors and receivers(Op. 15.10.82 - Det. date 1.3.83 - BL

85.22 Text(Op.

displays, microprocessor controlled self - program able1.4.82 - Det. date 22.2.83 - BL 8252364)85.22 Amplifiers, HF lock -fn, signal channel frequency 100 KHz - 50 MHz,reference channel frequency 100 KHz - 50 MHz, with or

5202/96without vectorphase option model 5202/95 or ratio option model

(Op. 1.4.82 - Det. date 25.183 - BL 8050728)85.22 Audio processors, AM and FM, designed to be used to produce totalcontrol of AM and FM sound modulation

(Cp. 6.10.81 - Dot. date 25.1.83 - BL 8160675)

19

19

19

19

19

19

19

19

19

19

Commonwealth of Australia GazetteNo. P 9, 22 April 1983 Consolidated By -law References (Part I) 43


Col Limn 1 Col Linn 2 Col Linn 3

85.22 Consoles, control, teacher's, of a kind used in language and music 19

laboratories(Op. 1.5.81 - Det. date 25.1.83 BL 8254495)

85.22 Control systems, 'Codex' distributed network, designed tositetest and 19

monitor data communications networks from a central(Op. 13.5.82 - Det. date

beinginferfacgè

25.1.83 - BL 8252834)

85.22 Couplers, interface instruments designed to use the IEEE 488 19standard digital for programmable instrumentation enablingthe control and programming of non IEEE bus compatible devices(Op. 1.1.82 - Det. date 25.1.83 - BL 8250554)

85.22 Double balanced mixers 19(Op. 11.12.81 - Det. date 25.1.83 - BL 8250211)

85.22 Pulse generators, 1 000 MHz, 110 to 240 Vfor

AC, 50 to 60 Hz power supply 19

with 80 nano sound delay line, designed acceptance testing ofoptical fibre cable(Op. 1.7.82 Det. date 25.1.83 - BL 8254188)

85.22 Telegraphic signal generators model TSG4O designed to provide 19

test signals in telecommunication applications(Op. 1.6.81 -

signal

Det. date 25.1.83 - BL 8156643)

85.22 T.V. test generators comprising mainframe and plug in modules 19includingg V.1.T.S. CR P.L.U.G.E. signals In accordance with C.C.I.R.recommendations, designed for use in the adjustment, testing andmeasurement of video equipment(Op. 17.8.82 - Det. date 25.1.83 - BL 8254893)

85.22 Photo electric ambient Iight sensors, having a capacity of 4 000 W 19

or more(Op. 1.4.82 - Oet. date 25.1.83 - BL 8252115)

85.22 Stereo synthesisers, Orban model 245E, designed to convert mono 19signals into stereo(Op. 1.6.82 - Det. date 25.1.83 BL 8054561)

85.22 Television IF Modulators type PM5580 t9(Op. 1.6.82 - Det. date 25.1.83 - BL 8253800)

85.23 Co -axial cable, balloon type sheathed with cellular polyethylene 19(Op. 1.12.81 - Det. date 22.11.83 BL 8250044)

85.23 Flexible cable for battery operated headgear lamps as used in 19underground mining providing the cable compiles with BritishStandard 4945

-(Op. 1.7.82 Det. date 25.1.83 - BL 7955019)

85.25 Voltage terminations, electric cable 11 22 or 33 kV 19

(Op. 1.7.82 Det. date 1.3.83 - BL 8256043)

85.25 Bushings, synthetic resin bonded paper, having rating of 11 kV, 193 500 amps, 75 kV B.I.L., designed for use as current transformerbar primary bushings in power station auxiliary indoor switchgear(Op. 9.12.81 - Det. date 25.1.83 - BL 8161449)

85.25 Condenser bushings SRBP,a CT

(synthetic resin bonded paper) 33 kV, 19800 amp, having space of 500 mn(Cp. 28.1.81 - Det. date 25.1.83 - BL 8151449)

85.26 Transformerboard angle rails of sulphate cellulose, designed for use in 19

high(Op.

voltage oil immersed power25.1.83

transformers9.9.82 - Det. date - BL 81 52264 )

85.28 Digital displays of the fluorescent or gas discharge tube type, 19permanent) y sealed and having no external attachments(Op. 10.8.82 - Det. date 1.3.83 - BL 8330641)

86.09 Air springs designed for use on railway or tramway rolling stock 19(Cp 15.7.821 - Det. date 22.2.83 - BL 8253940)

-

-

-

L ommonweattn of Australia Vazetre44 Consolidated By -law References (Part It ,Vo. P 9, 22 April 1983

TariffReference

Col unn 1

86.09


Col unn 2


Col .mn 3

Tramcar bogie equipment as follows: 19Braking equipment:- Calipers and pads, "Waggonfabrik Verdingen A.G.,"- Handpumps "Harming and Kahl GMBH" type HY3/1 8- Hydro units, "Nanning and Kahl GMBH ", type I- ¢Y3/7 -11- Trackbrakers, "Knorr- Bremse GMBH ", type S854X/B,Hornstays and chevron holders, "Waggonfabrik Verdingen A.G. ",Suspension equipment:- Chevrons, Phoenix Gunn lwerke A.G. ", type ART 732097 S19Wheels:

"Bochum 54" with tyre "Fried. Krupp Huttenwerke A.G."(Op. 1.1.83 Det. date 22.2.83 - BL 8062764)

86.09 Air springs complete with height control valves and pressure balancing 19valves, for application to bogies on railway passenger cars(Op. 1.10.82 - Det. date 25.1.83 - BL 8057588)

86.09 Parts, designed to provide wheel slip /slide and spin control for four 19axle, two truck, rail cars, being ANY of the following:

- "WABCO" Decelostat Controllers Part No. 586285;- "WABCO" Decelostat Controllers Part No. 586283;- "WABCO" Decelostat Controllers Part No.

8153540)580456

(Op. 11.3.81 Det. date 25.1.83 - BL86.09 Wheels, rail car, pressed steel, having the following dimensions 19

(i) 355.6 rum diameter, having a weight not exceeding 10.43 kg;(11) 406.4 mm diameter having a weight not exceeding 14.97 kg

(Op. 6.9.82 - Det. date 25.1.83 - BL 8254750187.01 Tractors to which 87.01.31 or

rev87.01.9 applies

NOTcapable of producing 19

220 kW or greater at 2100 /min, but including:(a) scraper tractors; or(b) used or secondhand tractors

(Cp . 1.1.83 - Det . date 1 8.1.83 - BL 8330068)

87.01 Tractors to whichgreater

87.01.39 or 87.01.9 applies capableincluding:

of producing 19220 kW or at 2100 rev /min, but NOT

(a) scraper tractors; or(b) used or secondhand tractors

21.1.83 -(Op. 1.1.83 - Det. date BL 8330329)

87.02 All terrain an ib ious motor vehicles 19(Op. 9.8.82 - Det. date 18.1.83 - BL 8255937)

87.02 All terrain vehicles, single seater, four wheeled, engine 19capacity not exceeding 250 cc(Op. 2.6.82 - Det. date 18.1.83 - BL 8254292)

87.03 Deflectograph measuring apparatus mounted onthe

specially designed 19"Mercedes-Benz" trucks, designed for measuring deformationof road pavement(Op. 18.6.82 - Det.date 1.3.83 - BL 80515511

87.06 Parts for Spicer propellor shafts, 1400 series and upwards, being 19end yokes of "U -bolt or "Cap -bolt" construction, but

importednot

including bearings to which 84.62 applies when in aphysically separate state(Cp. 1.2.81 - Det. date 1.3.83 - BL 8157344)

87.06 Parts for Spicer propellor shafts, 1800 series and upwards, but 19not Including universal Joints or bearings lo which 84.62 applieswhen imported in a

Det.physically separate state

(Op. 1.2.81 - date 1.3.83 - BL 8157343)87.06 Allison transmissions series MT 600, 14T700, V700, 2000, 3000, 19

5000, 6000, 8000 or 9óO0(Op. 8.11.82 - Det. date 1.3.83 - BL 8160320)

87.06 Tracks, flotation over -tyre 19(Op. 1.11.81 - Det. date 25.1.83 - BL 8159519)

87.06 Transmission assemblies Allison models MTCLBT

643, MT 644, MT 653 DR, 19MT 654, HT 740 HT 750 IDR HT 754 CR,

BL754

(Op. 9.9.81 - bet. date 25.1.83 - 8158901 )

87.06 Wheel hubs4.2.82

rear for go -karts 19(Cp. - - Det . date 25.1.83 - BL 81 60044 )

87.06 Power steering boxes, for use ina

the maintenance, modification or 19repair of vehicles having front axle capacity exceeding 5 t, of akind to which

applies87.01.31, 87.02.1, 87.02.91, 87.03.2, 87.03.3 or

87.03.9(Op. 1.1.83 - Det. date 1.2.83 - BL 8160308)


Tariff Item andDateReference Description of Goods Validity


87.06 Steering rams, hydraulic power, for use in the maintenance modification 19or repair of vehicles having a gross vehicle weight of 24.17 t or more,goods a kind to which 87.01.31 or 87.02.91 applies(Op. 1.1.83 - Det. date 1.2.83 - BL 7957058)

87.10 Cycles, four wheeled, "Janark" brand, designed to be ridden by two 19

persons(Op.

çç29.6.9582

- Det. date 25.1.83 - BL

çç82253586)87.11(Ohp. i(.11.iZ -LDer. datéd25t1.83u- BLeä155912d)

19

90.09 Front projection systems comprising ALL of the following: 19

(a) electronic flash slide projector;(b) semi- silvered mirror (beam splitter); and(c) screen

designed to beam a false background behind a photographic subject(Op. 1.7.81 - Det. date 25.1.83 BL 8252730)

90.09 Colour transparency enlargers, designed to duplicate film transparencies 19while controlling colour cast and density range(Op. 14.11.81 - Det. date 1.2.83 - BL 8252107)

90.10 Photographic processors, designed for daylight processing of dental 19X -ray films up to 6 an x 8 an(Op. 21.9.82 - Det. date 25.1.83 - BL 8256097)

84.17 Thermo presses, designed to apply labels or transfers to cloth 19(Op. 3.1 1.81 - BL 8158854 )

84.18 Filter units sterile disposable types "Microflow" 25, 37, 50 19or 650, microporous membrane 0.11 um to 0.45 um micron poresize(Op. 21.9.82 - BL 8158308)

84.22 Powerscrew

units, hydraulics having an oil filled metal tank housing a 19pump and submersible electric motor, designed for use with

hydraulic lifts(Op. 14.8.81 - Det. date 1.3.83 - BL 8158202)

Commonwealth of Australia Gazette46 Consolidated By -law References Part ll No. P 9, 22 April 1983

TariffReference

Col umn 1

90.10

90.10


Column 2


Column 3

Processors and printers, designed to produce diazo duplicates(Op. 2.12.81 - Det. date 22.2.83 - BL 8252678)

Photographic processors, roller transport, designed for the processingof photographic sensitized materials, but NOT including ANY of thefol lowing:

(i) process cameras, whethersolely

imported separately or otherwise;(ii) processors used for the processing of roll type film;(iii) processors where prints are made on rolls of paper and then cut

to individual prints or series of prints(Op. 1.1.82 - Det. date 25.1.83 - BL 8256805)

19

19

90.10 Projection screens, vacuum supported, designed to give 180° dimensional 19viewing effects(Op. 1.7.81 - Det. date 25.1.83 - BL 8157911)

90.13 Spotlights, f-M1 fresnel, but NOT including follow spotlights or profile 19

(Op. 4.211.81Op

- Det. date 22.2.83 - BL 8256768)

90.14 Agricultural laser systems being units imported in the period 191 January 1981 to 30 June 1982, comprising:

(i) Rotary lasers complete with forms of mounting (i.e. standor tripod or the like) with dual grade capability mounteda minimum of 4 metres above ground;

(if) 360° detectorsout boxes

(sensors); and(iii) Read with provision for hydraulic controls,

designedNOTE:

for use on farms for land levelling

A Statutory Declaration from the end user stipulating that thesystem will be used for the above end -use for a

canminimum period

of i year Is required before this reference be utilised(Op. 1.1.81 - Det. date 22.2.83 - BL 8256661)

90.16 Drawing instruments, as follows: 19(1) Set squares NOT being student type;(fi) Flexible curves having two ruling edges;

(iii) Lettering guides(Op. 23.3.82 - Det. date 22.2.83 - BL 8252907)

90.16 Levels precision or engineers; being levels as follows: 19(I) Capable of measuring inclines by the use of graduated

scales incorporated in the housing; or(ii) Having the horizontal vial mounted above the body

adjustableof

the level in a revolving tube betweensupports

(Op. 1.7.82 - Det. date 22.2.83 - BL 8256802)

90.16 Protractors, steel, as follows: 19(i) Universal bevel;

(Ii) Protractors incorporating a

bevel

depth gauge;(iii) Protractor heads for combination squares,

combination sets and22.2.83

protractors(Op. 8.2.82 - Det. date - BL 8253055)

90.16 Pulp density scales, direct reading, capable of determining theof

19specific gravity of liquids, pulp, dry solids and percentagesolid contained in pulp(Op. 20.4.82 - Det. date 25.1.83 - BL 8252775)

1. 7.82

90.17 Cardiac output modules, designed to measure and display thermodilution 19

cardiac output and patient bloods temperature(Op. 3.9.82 - Det. date 22.2.83 - BL 8057912)

90.17 Cardioplegia solution administration sets 19(Op. 1.5.82 - Det. date 22.2.83 - BL 8253497)

90.17 Electrodes, spiral as manufactured by Corometrics Medical Systems, Inc. 19(catalogue no. 2462AÁ0), designed for pre -natal foetal heart monitoring(Op. 6.9.82 - Det. date 25.1.83 - BL 8254728)

90.17 Scanners, portable invasive, diagnostic, ultrasound, designed 19exclusively for veterinary purposes(Op. 11.8.82 - Det. date 25.1.83 - BL 8255954)

90.17 Stylets, intravenous, designed for use as obturators for intravenous 19catheters(Op. 8.7.82 - Det. date 25.1.83 - BL 8253727)

90.17 Dental handpieces, having adate

maximum speed not exceeding 120 000 rev /min 19

(Op. 1.3.82 - Det. 1.2.83 - BL 8251339)

90.17 Intravenous infusion sets, designed specifically for use with roller pumps 19

(Op. 8.4.82 - Det. date 1.2.83 - BL 8252267)

Commonwealth of Australia Ga:etteNo. P 9, J7 April 1983 Consolidated By -law References (Part 1) 47

TariffReference Description of Goods

Column 1 Column 2

90.18 Ventilators as follows: 19"Siemens-lana" models 900 900B, 900C"Puritan-Bennett" models AP-4B, AP -5B TV -2P, MA -18

(Op. 6.9.82 - Det. date 25.1.83 - BL 8059357)

90.24 Pressure gauges, capable of operating at a working pressure of 20 MPa 19or greater(Op. 1.6.82 - Det. date 25.1.83 - BL 8055046)

90.24 Pressure gauges, diaphragm and loaded beam indicator drive, with 19

viscous damping being heavy duty gauges designed for use on olldrilling rigs

1.6.81 -for oil water, gas and mud

8156020)pumping service

(Op. Oct. date 25.1.83 - BL

90.24 Manometers, "Dwyer" types: 19Flex -U -tube, models 1223 -M200 to 1223 - ,11000Flex -U -tube well type, models M1230 -20 to M1230 -90

M1235 -20 to M1235 -90Portable slack tube, models 1211 -50 to 1211 -200

(Op. 15.6.82 - Det. date 25.1.83 - BL 8253372)

90.24 Deadweight pressure testers, having an accuracy of + 0.040% or greater, 19hyydraulic or pneumatic(Op. 13.5.82 - Det. date 25.1.83 - BL 7956884)

90.24 Robertshaw thermostats in the following series: 19AP AT, FS, CF S, RC as manufactured by:

Robertshaw Controls Co., U.S.A.Campaggnie Europeenne des Thermostats S.A. FranceRobertshaw Orient Ltd, JapanPrecision S.A. MexicoControls Robertshaw Co., Brazil S.A. Brazil

(Op. 28.1.82 -Det. date 25.1.83 - BL 8256741)

90.24 Pressurewith

gauges, nominal outside dia 50 mm or 55 mmNot

designed for use 19compressed industrial or medical gases, but includ-

ing gauges for use only8256721)

with compressed air(Op. 1.2.83 - BL

90.27 Recorders, fuel, designed for installation in vehicles, being machines 19which automatically record fuel consumption and distance travelled, foruse otherwise than in the manufacture of motor vehicles in compliancewith the

1.8.82Government's Motor Vehicle Plan

(Op. - Det. date 25.1.83 - BL 8058602)

90.28 Datatesting

communication network diagnostic systems, designed to enable 19of computers, terminals and modems, and simulation of

hardware and software components(Op. 15.10.82 - Det. date 22.2.83 - BL 8063407)

90.28 Audio power meters,delivered

LED, designed to measure the peak and nnsand

19wattage to audio amplifiers, having 0 to 2 watt0 to 200 watt ranges and

dateselectable 4 or 8 Ohm input impedance

(Op. 20.9.82 - Det. 22.2.83 - BL 8151412)


Column 3

90.28 Impedance meters, designed to measure speaker line impedance 19during installation and service of public address equipment(Op. 1.10.82 - Det. date 22.2.83 - BL 8256039)

90.28 Jitter meters, designed totape

date

measure tape speed and jitter of 19magnetic video recording(Op. 17.11 .62 - Det. 22.2.83 - BL 8256067)

90.28 White balance meters, being meters which measure the uniformity 19of colour on TV colour monitors and receivers(Op. 17.11.82 - Oct. date 22.2.83 - BL 8256068)

90.28 Miniature recorders,_ as follows: 19Phillips" model l' 8110

"Rustrak" series 400A, 1400A, 3400A, 4300A, 4388 and ADC versions"Speedomax" series 100, model 400"Esterline Angus" Miniservo models

(Op.NOTE:

27.8.82 - Det. date 22.2.83 - BL 8256725)

Other miniature recorders will be considered for inclusionin this reference upon receipt of a by -law application

90.28 Lock(Op.

in analysers for signal processing 198.6.82 - Det. date 25.1 .83 - BL 7960000 )

90.28 Microwave link analyser systems, designed for making phase and amplitudemeasurements for 70 MHz IF microwave radio links(Op. 10.9.82 - Det. date 25.1.83 - BL 7961301)

19

48 Consolidated By -law References (Part /)Commonwealth of Australia Gazette

Vo. P 9. 22 .-ipri! 198'

TariffReference

Column 1

90.28

90.28

90.28

90.28

90.28

90.28

90.28

90.28

90.28

90.28

90.28

90.28

90.28

90.29

90.29

92.11

92.11

92.12

93.06


Megchmmeters, capable of measuring resistances in excess of 1 000NL#(Op. 9.7.82 - Det. date 8.2.83 - BL 8253687)Speaker anal ysers, designed to measure frequency response, impedanceand(Op. 18.2.82

admittance of-

loud speakersDet. date 25.1.83 - BL 8251234)

Level tracers, capable of measuring to 4 kHz, designed for the alignmentof balancing networks in voice and data r

8058888)/mission networks(Op. 1.9.82 - Det. date 25.1.83 - BL

Ammeters demand, thermal operated, hook -on type8253936)(Op. 23.`/.82 - Det. date 25.1.83 - BL

Deviation meters, designed to provide direct reading of FM peakdeviation in the range 0 to 20 KHz both inclusive, frequencyresponse 10 Hz to 2.4 KHz both inclusive, having an accuracyof + 4% of full scale(Op-7'12.1.82 - Det. date 25.1.83 - BL 8250634)Pyrometers, designed to measure exhaust gas temperature of internalcombustion engines(Op. 1.8.82 - Det. date 25.1.83 - BL 8052829)Video noise meters, frequency range 40 Hz to 10 MHz inclusive,having the provisions to measure imminence and chrominancenoise and am Iitude modulated and phase modulated noise(Op. 27.10.82 - Det. date 25.1.83 - BL 8255760)Pattern generators designed for the

- BL

testing

8151504)

and fault finding on

(Op.pulse core 82o-

De- date .1.83

Plug in units for "Tektronix" 5000 Series digital storage oscilloscopes,as follows:i i) 5825N Digital time base;

(il) 5D ION Waveform digitiser(Op. 14.7.82 - Det. date 25.1.83 - BL 8059508)OsciIloscriet recorders, "Philips," series PT 5000 P(Op. 20.1.82 - Det. date 25.1.83 - BL 7956908)Circuit testers, I.F., being alignment generators designedtesting of intermediate frequency circuits of 455

8255967)

KHz (AM)10.7 MHz (FM) radio receivers(Op. 10.11.82 - Det. date 25.1.83 - BLEarth leakage testers, portable, designed to measure earthcurrents In the range 0 -150 A both inclusive(Op. 1.7.82 - Det. date 25.1.83 - BL 7959764)Multimeter clamp testers, analogue, designed to measure amps, ohms andvolts(Op. 6.5.82 - Det. date 25.1.83 - BL 8150918)Thermal convertors, vacuum thermocouples and vacuo- junctions, beingused to determine

- Det.a RMS value of current or voltage

(Op. 1.1.83 date 22.2.83 - BL 8061942)Thermostat parts, being parts for Ranco thermostats types SA, F53, F56,or A59(Op. 1.4.82 - Det. date 25.1.83 - BL 8256739)

Cassette decks, but NOT including cassette decks used in motor vehiclesor(Op.

for background music systems15.2.83 - BL 8330081)

Sound reproducers having a nominal voltage of 6 V and /or 12 V DCor 24 V DC, designed for Installation In motor vehicles, (but NOtincluding sound reproducers Incorporating or imported with speakers)being sound reproducers for use otherwise than in the manufactureof motor vehicles in compliance with the Government's Motor VehiclePlan(Op. 22.11.82 - Det. date 15.2.83 - BL 8256781Sound Slides being a slide transparency holder fitted withmagnetic sound track designed for use with sound on slide machines(Op. 1.11.82 - Det. Date 1.3.83 - BL 80 58866)Gunstocks to which

19 in93.06.1 applies being parts for goods which, if

Imported, item Schedule 4 to the Customs Tariff would apply byvirtue of a by -law or determination made under

8256812)

part XVI of the CustomsAct(Op. 1.1.83 - Det. date 18.1.83 - BL

for theand

leakage

goods

A50


Column 3

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

19

Commonwealth of Australia GazetteNo. P 9. 22 April 1983 Consolidated By -law References (Part I) 49



93.07 Centre fire rifle and pistol ammunition but not including the following: 19. 1 7 Remington:.22 Hornet;.22 -250 Remington;.222 Remington;.222 Rimmed;.223 Remington;. 243 Winchester;308 Winchester;

7.62 Nato;.30/30 Winchester;.303 British;.310 Cadet;7.7; x 54;.303/22;.303/25;.303 /27;.38.357

Special revolver cartridges; orMagnum revolver cartridges

(Op. 30.1T.82 - BL 8256003)

93.07 Shotshel I wads, plastic, as fol lows: 19. 20 gauge;. 410 gauge

(Op. 28.10.82 - Det. date 18.1.83 - BL 8052326)

94.01 Car seats designed for handicapped children 19(Op. 9.9.82 - Det. date 25.1.83 - BL 8254828)

94.03 Cradle rocking devices designed for attachment8254956)

to babies' cradles 19(Op. 20.9.82 - Det. date 1.3.83 - BL

94.03 Cardprinted

frame and

- Oct.module mounting systems designed for the storage of 19

circuit boards and plug in-

modules8256017)(Op 2.9.82 date 25.1.83 BL

96.01 Correction fluid applicator brushes designed for fitting to bottle caps 19(Op. 26.8.81 - Det. date 25.1.83 - BL 8158491)

97.03 Model aircraft engines,unassembled,

model car engines or model marine engines, 19assembled or but If unassembled having all componentsnecessary at the time of Importation to manufacture complete engines,but not including parts and accessories for such goods(Op. 21.5.82 - Oct. date 25.1.83 - BL 8255040)

98.03 Components for ball point pens but NOT including springs refills 19

and parts therefor whether imported separately or otherwise, foruse In the manufacture of ball point pens of a kind which arenormally sold on the retail market at a price in excess of íA2.50each, provided that no two or more components for any

goodspen are

imported fitted together or forming part of other(Op. 1.7.82 - Det. date 22.2.83 - BL 8254918)

98.03 Pens, lithographic film or lithgraphic plate 19(Op. 26.5.82 - Oct. date 25.1.83 - BL 8255860)

98.10 Flare pilot ignition equipmentML ZA

as follows: 19mag icl ite Ignitorsmanual flame front generators

(Op. 29.7.82 - Det. date 25.1.83 - BL 8157871)

98.15 Dewar cryogenic flasks 19(Op. 30.9.82 - Oct. date 25.1.83 - BL 8060694)

Commonwealth of Australia Ga:ette50 Consolidated By -law References (Parr ll! ,Vo. P 9. 22 April 1983

Customs Act 1901Notice of Determinations under Part XVI

The Minister of State for Industry and Commerce, Senator John N. Button, in pursuance of Section273B(2) of the Customs Act 1901, notifies that Determinations have been made under Part XVI of thatAct, as appended in the Table hereto.

The Table specifies:-

(I) The kind(s) of goods to which the Determination applies, the conditions specified in theDetermination, where applicable, and the commencing date of the Determination;

(ii) The items in Schedule 4 to the Customs Tariff Act 1982 which shall apply to the goods;

All goods being machinery are, unless otherwise indicated, subject to the provisions of SeparateArticles Directions given under paragraph (b) of sub - section (1) of Section 26 of the CustomsTariff.

Each of the Determinations, the making of which is published in this notice, has been or Is beingincluded as a reference in the departmental publication "Consolidated By-law References" and, whileany such reference remains current, goods conforming to the description therein may beconcessienally entered accordingly without prior application.

Copies of the Consolidated By -law References may be inspected at, or purchased from, the Departmentof Industry and Commerce.

Manufacturers who consider that they manufacture goods suitably equivalent to the goods described inthe Table may apply to the Department, quoting the relevant file number, for consideration ofrevocation of the Determination.

Commonwealth of Australia GazetteVo. P 9, 22 April 1983

Consolidated By -law References i Part


Column 1


Column 2

Goods (including parts therefor unless specifically excluded) as 19listed in Table At for use in:

(a) electric, diesel electric or diesel hydraulic railwaylocomotives; or

(b) electric, diesel electric or diesel hydraulic railwaypassenger vehicles, under security

TABLE A

(a) Air suspension springs(b) Axle (journal) bearings(c) Bogle suspension rubber elements(d) Cardan shafts(e) Couplings, flexible, Vulkan types EZ or Vulkardan type P(f) Dynamic brake units (whether or not incorporating integral

blowers) but not including resistance grids whether imported

separately or otherwise(g) Eddy current clutches(fi) Electrical control equipment (but not including any goods, and

separatelyparts therefor, listed in Table B, whether importedor otherwlse)designed for use in controlling:

(i) the operation of the diesel engine;(1i) generators;

(ifi) auxiliary machines;(iv) traction motors;(v) brakes and switching; or(vil motor alternator sets

(i) Engine cooling fans incorporating integral drive motors(') Friction snubbers(k) Fuel gauges (glow rods)(I) Heater indicator assemblies, smoke or odour type, designed to

be used withalternator

roller bearings(m) Motor sets(n) Oil pumps, for use In gearboxes rated in excess of 299 kW(o) Sealed beam lamps for headlights(p) Speed indicating and recording equipment(q) Torque reaction pads for use with axle drive gearboxes(r) Transmission oil coolers

lubricatorsand impel lors

(s) Wheel flange(t) Windscreen wipers

TABLE B

(a) high tension fuses(b)(c)

plugs and receptacles (juniperbrake

couplings)resistors

(d) resistance grids for systems(e) circuit breakers

(Op. 8.2.83 - Det. date 1.3.83 BL 8330707)

Industrial robots, being ANY of the following:(a) Industrial robots where the system is programmed by the actual

duplication of a sequence by the manual manipulation of the endeffector;

(b) Industrial robots with multiple axes and with continuous pathsoftware capability;

(c) 'Point to point" industrial robots having a lifting capacityexceeding 60 kg,

but NOT including spray painting equipment, welding equipment or endeffector manipulators (grippers), when imported separatelyNOTE:POT the purposes of this determination continuous path means the

ability to2.9.82

program linear and circular interpolation(Op. - Det. date 1.3.83 BL 8254793)

19

111 it

-

Commonwealth of.- lustralia Gazette52 Consolidated By -law References (Part III No. P 9. 22 .April 1983



Column 2

Parts for 'EATON' driving axles, as follows:PART NO. DESCRIPTION PART NO.

1063951063%559575698162165809299113391218791 3250915623990243268658975854853820810328910670846647

02626044560670910881108851512315126

3812741103983939839498603986959869799184

10671010732111569011582567759678537956192281985931026058822188222985906541967804769307899874020985889641791 11402618092382063246749705050

2080732 732621586781 17894181 37981855885039903390069

(continued)

Axle shaft

Carrier & CapIf

r nr

rrr

It

n

nrr

n n

n rr

n nItIt

n

rrn

Cap Screwrrn n

ItIt

Itrr rrn n

ttIt

n It

It

n nn n

rr

90070913859309962839628496285982021 610216114575

925235678171018781064701069741069751092701181381 181 8951 5599480094801948109481196 794967951101489247894 79998584985852795927860279508541783 729862888802991 8509628096281981 839837990050810262125967278432804245451789068828392314986101081382783827839

026090814310810108451144813329

454767891584 5069256495218

DESCRIPTION

Cap Screwr

Gear

rr

rf

It

19

rr "" n n" 'r Ir" " n" " nn nr' H

nH rr n n" " nn n" "n n

Casen H n" " "

" rr

" n n'rn

" n" rr

n"

" " n" "" rr

"n "" " nn

n" " Iln n

" rrIl

n" " n

nIl

nnrr

"" n

nII

nnII

n

nn

"

n

" n

n

nrr

n

n

n

Lommonweattn of Australia GazetteNo. P 9, 22 April 1983 Consolidated By -law References (Part 1/1 53

Description of Goods Item andVal Idity Date

Column 1 Column 2

Parts forPART NO.

'EATON' driving axles, asDESCRIPTION

follows: 19

PART NO. DESCRIPTION

9838998390983919839282430925314697774991

192052672826 7293071 3378913789238561394 914328446726759277669786583 7998540290080690201902069054439264419520395204952069520795209804624

1041391081427405795210963 81

7891 7,95562,96628,96835,9811 7,994 9698581,

111177,111185,111195,111505,111513,85432,

78911,95566,96642,968399811 9,

99898,11178,11186,11196,11506,11514,07544.

Gear 102616

31 70432 829385266311478400902990909118Nut909119

45859rr 78934

3242532679

If 102613103529326131036131035293277262720

rr 84508rr

3038230383

If 44812n 45 926

5056852338

If 7359275662838018488686427

PInion 86 96087513

Ifn

GEAR AND PINION KITS,

ShiftPush

Stud

ShiftIfIlrr

Iffl

Ifn

rr

n

Yoke

UNASSEMBLED

Fork dRod

IfIfrr

ForkIfIf

r

If

n

nn

n

IfIf

ffrr

95561,96623,

98115,99495,99526,11176,11184,1119411504,11512,14470,

78933,95569,

96841,98259,9851 9,04537,

11187,11351,11507,11515,

95549,95575,96646,96872,98741,99521,10862,11180,11188,11352,11508,11517,

95551,95585,966499687798742,99579,10864,11181,11190,11501,11509,11518,

95558,95588,96650,9810498743,98744,11174,11182,11191,11502,11510,11519,

95559,9661996797,98113,98744,99525,11175,11183,11192,11503,11511,11523,

(Op. 9.3.82 - Dept. date 1.3.83 - BL 8252692)

""n

""""

""

"w

"

"n w

""

"

""

""

"

"

"

"

"

11179,

Commonwealth of Australia Gazette54 Consolidated By -law References (Part HI No. P 9, J2 April 1983


Column 1 Column 2

Handicrafts to which Part (ii) of Schedule 4 applies beinggoods to which a Tariff Classification specified in the Tablehereunder applies that -(a) have been sent by a person outside Austral la as an

unsol iciated gift to a person resident in Australia;(b) are not entered to be used for any commercial purpose,

including sale, lease, hire or exchange; and(c) are not in such a quantity that that quantity represents

a commercial quantityTHE TABLE

Tariff BY- law ProvisionClassification and Validity Date

Operative

42.03.400 571 BL 8330401 1 .83)50.09.900 651 BL 8330402 1 .83)51.04.900 661 BL 8330403 ( 83)55.08.000 671 BL 8330404 1 .83)55.09.500 681 BL 8330405 1 .83)56.07.900 721 BL 8330406 ( .83)60.03.100 781 BL 8330407 1 .83)60.04.100 791 BL 8330408 ( .83)60.04. 210 801 BL 8330409 1 .83)60.04. 29060.04.300

811 BL 8330410 (821 BL 8330411 ( .83 )60.04.410

60.04.490831 BL 8330412 1 83)841 BL 8330413 ( .83)

60.04.500 851 BL 8330414 (60.04.600 861 BL 8330415 1 .83)60.04. 700 871 BL 8330416 1 .83)60.04.90060.05.200

881 BL 8330417 1 .83)891 BL 8330418 (60.05.310 901 BL 8330419 1 .83)60.05.320 911 BL 8330420 ( .83)

60.05.33060.05.340

921931

BLBL

8330421 1

8330422 1

.83)

.83)60.05.350 951 BL 8330423 1 .83)60.05.360 961 BL 8330424 (60.05.370 971 BL 8330425 1 .83)60.05. 390 981 BL 8330426 ( .83)60.05. 700 991 BL 8330427 ( .83)61.01.300 001 BL 8330428 1 .83)61.01.910 011 BL 8330429 1 83)61.01.920 021 BL 8330430 (61.01.93061 .01.940

031041

BLBL

8330431 (8330432 (

.83)

.83)61.01.950 051 BL 8330433 ( .83)61 .01 .96061.01.990

061071

BLBL

8330434 (8330435 (

.83)

.83)61 .02.300 081 3L 8330436 ( .83)61.02.910 091 BL 8330437 ( 83)61 .02.92061.02.930

101111

BLBL

8330438 1

8330439 (.83).83)61.02.940 121 BL 8330440 (

61 .02.95061 .02.960

131141

BLBL

8330441 (8330442 (

.8 3 )

.83)61.02.990 151 BL 8330443 1 .83)61 .03.21061.03.220

161171

BLBL

8330444 (8330445 (

.83)83)61 .03.310 181 BL 8330446 1 .83)61.03.320

61.03.40061.03.900

191201211

BLBLBL

8330447 (8330448 (8330449 1

.83)

.83).83)61.04.100

61.04.200221231

BLBL

8330450 1

8330451 (.83).83/61 .04.310

61 .04.390 241251

BLBL

8330452 (8330453 (

.83)

.83)61 .04.400 261 BL 8330454 ( .83)61.04.900 271 BL 8330455 ( .83)61.09.10061.09.20062.02.20062.02.52062.02.54062.02.60064.01.920

281291301311321331381

BLBLBLBLBLBLBL

8330456 (

8330457 (8330458 1

8330459 (8330460 1

8330461 (8330462 1

.83)

.83)

.83)

.83)

.83)

.83)

.83)64.01.93064.02.920

391401

BLBL

8330463 1

8330464 (.83)83)64.02.990 421 BL 8330465 ( .83)64.03.200 431 BL 8330466 ( .83)64.03.300 441 BL 8330467 ( .83)64.04.200 351 BL 8330468 1 .83)64.04.300 461 BL 8330469 ( .83)

(Det. date 22.2.83)

Commonwealth of Australia GazetteNo. P 9, 22 April 1983 Consolidated By-law References (Part 111 55


Column 1 Column 2

Goods (including parts therefor unless specifically excl uded) as listed in TableA, for use in:

(a) electric, diesel electric or diesel hydraulic railway locomotives; orpassenger( b) electric, diesel electric or diesel hydraulic railway vehicles,

under security

TABLE A

(a) Air s ¡Journal)ens( sDriDgsbearings(b) Axle

(c) BogieCardan

suspension rubber elements(d) shafts(e) Dynamic brake units (whether or not incorporating integral blowers), but not

Including resistance grids whether imported separately or otherwise(f) Eddy current clutches(g) Electrical control equipment (but not including any goods, and parts therefor,

listed in Table B, whether imported separately or otherwise)designed for usein controlling:

(i) the operation of the diesel engine;(ii) generators;(iii) auxIliary machines;(iv) traction motors;(v) brakes and switchingg;

setsor

(v1) motor alternator(h) Engine cool ing fans incorporating Integral drive motors(i) Friction snubbers(j) Fuel gauges (plow rods)(k) Heater indicator assemblies, smoke or odour type, designed to be used with

roller bearings(I) Motor alternator sets(m) Oil pumps, for use in

forgearboxes rated in excess of 299 kW

(n) Sealed been lamps headlights(o) peed indicating and recording equipment(p) reaction pads for use with axle

lorsdrive gearboxes

(q) Transmission oil coolers and impel(r) Wheel flange lubricators(s) Windscreen wipers

TABLE B

(a) high tension fuses(b) plugs and receptacles (jumper couplings)(c)(d)(e)

resistorsresistance grids for brake systemscircuit breakers

(Op. 8.2.83 - BL 8330295)

19

56 Consolidated By -law References (Part 11)Commonwealth of Australia Ga:ette

Vo. P 9, 22 April 1983


Item andVal idity Date

Column 2

Goods (including parts therefor unless specifically excluded) as listed in TableA, for use in:

(a) electric, diesel electric or diesel hydraulic railway locomotives; or(b) electric, diesel electric or diesel hydraulic railway passenger vehicles,

under securityTABLE A

(a) Air s 5pensip p rip sbearings(b) Axle (journal)

(c) Bogie suspension rubber elements(d) cardan shafts(e) Dynamic brake units (whether or not incorporating integral blowers), but not

Inc! udlong resistance grids whether imported separately or otherwise(f) Eddy current clutches(g) Electrical control equipment (but not including any goods,

otherwise)and parts therefore,

listed in Table B, whether imported separately or designed for usein controlling:

(i) the operation of the diesel engine;(ii) generators;

(iii) auxiliary machines;(iv) traction motors;

(v) brakes and switchingg; or(vi) motor alternator sets

(h) Engine cooling fans incorporating integral drive motors(i) Friction snubbers(j) Fuel gauges (glow rods)(k) Heater indicator assemblies, smoke or odour type, designed to be used with

roller bearings(I) Motor alternator sets(m)

Oil pumas,for

lampsuse In

for headlightsgearboxes rated in excess of 299 kW

( Sealed(o) Speed

Torqueindicating and recording equipment

(p) reaction pads for use with axle drive gearboxes(q) Transmission oil coolers and impel lors(r) Wheel flange lubricators(s) Windscreen wipers

TABLE B

(a) high tension fuses(b) plugs and receptacles (jumper couplings)(c) resistors(d) resistance grids for brake systems(e) circuit breakers

(Op. 8.2.83 - BL 8330295)Parts for gas generators ( eng Ines) as

asU.S.A.;

follows:- Allison

of Generalseries 501 or 507 manufactured by Detroit Diesel Allison, Div.

,motors Corp.,- Avon 1533 series or Olympus 2020 series as manufactured by Rolls -Royce

Ltd., Derby, U.K.;- Kawasaki series S1A, SiT, S2A, MiA, MIT, TF as manufactured by Kawasaki

Heavy Industries of Japan;- Ruston gas generators as manufactured by Ruston Gas Turbines Ltd,

Lincoln, UK; a-- Solar gas generators

California,as manufacturered by Solar Turbines Inc., San

Diego, U.S.A.(Op. 1.2.83 - BL 8255771 )

Parts of a kind in respect of which, if imported incorpoof other goods, duty ascertained in accordance with Part22 or 23 of the Customs Tariff Act 1982, as proposed toexceed 6 per cent of the value of such parts, subject to

(a) the parts were ordered with and are imported withwhich they are a part; and

(b) the Collector is satisfied;(I) the parts are standard initial service par

and(Ii) the quantities are reasonable

(Op. 1.1.83 - Det. date 1.2.83 - BL 8330091)

rated in or forming partII, Sections 19, 20, 21,

be altered, would notthe following conditions:

the complete goods for

is for the complete goods;

19

19

19

Commonwealth of Australia GazetteNo P 9, 22 April 1983 Consolidated By -law References (Part U 37

Customs Act 1901Notice of Determination Under Part XVI

The Minister of State for Industry and Commerce, Senator John N. Button, in pursuance of Section2739(2) of the Custans Act 1901, notifies that Determinations have been made under Part XVI of thatAct, revoking earlier Determinations referred to in the Table appended hereto

As a consequence of the revocations herein notified, the relative references to the Determinationsconcerned which have been included in the departmental publication "Consolidated By -law References ",and which are more particularly identified in the Table, have been cancelled

The Table specifies:

(i) Tariff item under which the application was considered;

(il) The kind(s) of goods to which the Determination applies, the commencing date of theDetermination and the By-law number;

(ill) The item in Schedules 3 or 4 to the Customs Tariff Act 1982 as proposed to be amended whichshall apply to the goods and the validity date (date of cancellation). Where the item isshown in the form of 4 figures or more it is an item of Schedule 3 and where a 2 figure itemis shown it Is an item of Schedule 4.

Commonwealth of Australia Ga_ette58 Consolidated By -law References (Part /) No. P 9. 22 April 1983

TariffReference

Column 1

21.07

32.12

35.06

37.03

38.19

38.19

39.01

39.02

39.02

39.02

39.02



Column 3

Di fco Bacto yeast extract, for use in the manufacture of yeast extracts, 19under security 28.2.83(Op. 11.1.82 - Det. date 25.1.83 - BL 8252548)Anaerobic adhesive and sealants, single solution polymerising type, 19

14.2.83designed(Op.

Bonding

to cure- only in the absence of air

18.12.80 Det. date 21.7.81 - BL 8150668)

film adhesives or adhesive transfer tapes, designed for use 19in the printing industry, carton manufacture, general purpose splicing 14.2.83and the like(Op. 25.5.82 - BL 8252346)

Printing plates or sheets designed for use with printing machines to 19which 84.35 applies 24.1.83(Op. 3.2.80 - Det. date 3.2.81 - BL 8150743)

Polyols, or polyol based preparations, where the polyol has a minimum 19of 3 hydroxol units per molecule, an average

manufacturemolecular weight less than 24.1.83

400 AND is of the type used in the of polyurethane(Op. 27.7.82 - BL 8'155046)

Electroless copper 825B and R solutions, containing sodium hydroxide 1924.1.83of higher than B.P. Grade

(Op. 5.11.80 - Det. date 25.8.81 - BL 8062401)

Phenoplasts, for use in the manufacture of a varnish for lining 19beverage can ends, under security 31.1.83(Op. 30.11.76 - BL 7662162)Polyvinyl(Op.

alcohol- sponge 19

26.3.74 72703091 14.2.83

Polyvinyl formal sponge 19(Op. 26.3. 74 - BL 7363052) 14.2.83

Polyvinyl formal sponge or polyvinyl alcohol sponge 1914.2.83(Op. 19.12.78 - BL 78615211

Polystyrene planar forms, for use as the dielectric in the manufacture 19of capacitors, under security 14.2.83(Op. 5.6.73 - BL 7252979)

39.02 Vinyl chloride polymer or copolymer planarclosed cell

forms, as follows: 1914.2.83(a) 'Airex" unplasticised, rigid polyvinyl chloride

foam(Op. 1.3.82 - Det. date 1.6.92 - BL 7960198)

39.02 Vinyl chloride polymer or copolymer planar forms as follows: 1914.2.83(a) Foam closed cell, coated on one or both sides with pressure

sensitive adhesive(Op. 5.6.73 - Det. date 14.11.78 - BL 7860402)

39.02 Vinyl(a)

(Op.

chloride polymer or copolymer planar forms for use: 19as reinforcement between layers of fibre glass, being 14.2.83rigid foam planar forms of polyvinyl chloride, under security;

5.6.73 - Det. date 14.11.78 - BL 7860403)Blocks cellulose sponge

7760319)19

(Op. 20.6.78 - BL 14.2.8339.07

39.07

39.07

Chamois, imitation, polyvinyl formal 19(Op. 11.11.75 - BL 7557033) 14.2.83

Cones, membrane, of a kind used in centrifuges for concentration of 19analysis samples 24.1.83(Op. 2.7.79 - Det. date 7.8.79 - BL 7953292)

39.07 Fishing floats, model K -10 yellow, designed for use on tuna purse 1931.1.83seine nets

(Op. 19.1.81 - Det. date 19.1.82 - BL 8058809)39.07 Polytetrafluoreothylene hose, but not including such hose reinforced 19with braid 14.2.83

(Op. 9.4.80 - BL 8052999)40.02 Synthetic rubber, to which 40.02.9 otherwise applies

(Op. 1.1.83 - BL 8255293)40.02 "Het izarin binders TS ", being polybutadiene acrylonitrile latex

(Op. 21.5.81 - Det. date 16.3.82 - BL 8251539)

40.02.231.12.83

1924.1.83

Commonwealth of Australia Ga:etteNo. P 9, 22 April 1983 Consolidated By-law References (Part I) 59

TariffReference

Column 1

40.08

40.09

40.09

40.09

40.09



Column 3

Foam rubber, spun rayon backed designed for use in the manufactureof foam insoles or 'Ball -0-Foo+" protective cushions(Op. 10.8.82 - BL. 8253700)

Automotive air conditioner hose to specification SAE J51B Type A orType B, but NOT including hose having an internal dia of 13/32" orhose imported with connections and fittings attached(0p. 18.8.82 - Det. date 16.11.82 - BL 8255722)Elbows,(op 1.7.80

hump hose or reducers- Det. date 16.9.80 - BL 8052645)

Hydraulic hose, stainless steel wire reinforced, with an innerlining of polytetrafIuoroethylene, but not Including hose importedwith fittings attached(Op. 27.3.79 - BL 7951838)

Hydraulic hose, spiral laid (but NOT including hose imported withfittings attached), to the following specifications:

Aeroguip G-1506;S.A.E. J51 7C 10085;S.A.E. J517C 10089 but not including sizes 4.8 mm to 31.8 mm I.D.;S.A.E. J517C 100810;S.A.E. .151 7C 1008 11 ; orS.A.E. J140213 type E

(Op. 10.8.82 - Det. date 5.10.82 - BL 8254513)40.10 Transmission belts, designed for use with agricultural machinery, as

fol lows:International Harvester Co:

210185C113988K15166K3968308(continued)

Massey

Part

Part No :

10352F5766901

:

545000M1545651M1545654M1545655415505961132872761413287277M1948457M934753M92435814923505M927137M926785M935133M936376M92 7210M

Holland:

230077230078230080230070356025

16651K40112E1'221432813141902882150430011410644892150670011525860115335901540060164999C9268665C26867801765650176567017657601

473468855095081552747R2557514M2559808M1561800142

2

and C2

6298208159331 781595756815977368160734481610521816119298161193C81611 93 2R 2633723226337268265634;RI6571 85R166348CR 16746208175242481753603R 1823091C1925725M19362298193 792 8R I937932R131 724048 155307981

936291.M12 72 7920141924359M 15567794912745535M155 72 92M1557784M1560667M1923639M1923640M1923802M2923971M2924327241924329M192462341924698M2

354115336784337415362500261001

92476942

925726M1

933031M2933139493 3245M933505M93891942601M944823M944824M529964M

247782254093261000

5551 1 E856043181562655R 1

5644 948 2565565R1589622'215896238 1

591 87E815921 288663609811418731R1141 9233R803296R1

41 92328141 71088 1

31403019637101974110197413019741401

214522013904618

925216141

92773511

214

1

1

1

76577C17801 9C 179007C1826150182 94 501830480184 7960186509028741501874150291 2880291290C19129101913050192360C19514x19741 2C 197416019748001

20109201

1

Ferguson:No

195433M1272 71 60M22826795M1282716CM912827363M12 82 73621422835234M2835857M2835858M2837791M283 91 3CM3053289M3053556M3055094M31 8083E143180869M

Sperry NewPart No :

230043230056230060309364333958

(Op. 14.9.82 - Det. date 14.12.82 - BL 8255016)

1931.1.83

1924.1.83

1914.2.83

1931.1.83

1915.2.83

1928.2.83

60 Consolidated By -law References (Part /)Commonwealth of Australia Gazette

:Vo. P 9, 22 Apri! /983

TariffReference

Column 1

40.14

47.01

47.01

48.07



Column 3

Elements, being part of a Ikan flexible coupling or part of a 1915.2.83"Fernaplex" coupling

(Op. 14.12.82 - BL 8256221)

Chemical softwood pulp (other than refiner ground wood pulp), beingDods to which 47.01.2 otherwise applies(Op. 1.1.83 - BL 8255209)

Unbleached sulphate kraft softwood p p (other than refiner groundwood pulp) being goods to which 7.ÓO.2 otherwise app es(Op. 1.1.83 - BL 8255210)

Paper and paperboard described in column 1 of the Tablespecified in

hereunderhaving a Customs value not less than the amount column 2of that Table opposite those goods

THE TABLE

Column(Description

1

of Goods)

TariffClassification Goods

Column 2(MinimumCustoms Value)

48.07.9 Paper and paperboard, printedor embossed with words lettersor figures and by reason ofsuch printing or embossing,recognisable as suitable for useas a wrapping medium or In thecovering of containers of goods(Op. 1.1.83 - BL 8255271)

48.07.7 Fancy205

papers,

waxedcoated

coated, not exceedingg/m having printed or embossed

designs thereon, but not includingANY papers that are:

(a) or gummed; or(b) in any manner on

ordesign

thereverse side thereof;

(c) have a woodgrain(Op. 1.1.83 - BL 8255272)

51370/tonne

50.062 m2

47.01.1131.12.83

47.01.1131.12.83

1914.2.83

48.07 Transfer paper coated with fluorescence, designed for use in banking 19stationery 28.2.83(Op. 3.5.82 - Det. date 25.1.83 - BL 7961227)48.15 Diagnostic reagent papers as follows: 19(a) "Ox id" types: 28.2.83Anaerobic Indicator strips;

An -Ident discs;Bacitracin discs;Factor discs;MuItodises;Cptochtn discs;Sensitivity discs;Spore strips

(b) "Mast" types:Adapad'

Bacter ur i test ;Bacitracin discs;Diagnostic rings (Mastring -S);Methicillin strips;M.I.C. Method;Optichin discs;Selectee ircles;Sensitivity discs;Steam Thermophilus spore strips;X and V factor discs

(Op. 6.5.81 - Det. date 26.1.82 - BL 8155174)48.15 Echo

(Op.sounder29.1.81

recorder paper, wet26.1.82

type 19- Det. date - BL 8151551) 31.1.8348.15 Electro-

(Op.sensitive recording pé 1928.9.81 - Det. date (3.4r82- BL 8159450) 31.1.83

53.02 Fur, hatters19(Op. 1.1.71 - BL 7253755) 24.1.83

Commonwealth of Australia Ga_etteNo. P 9. 22 April 1983 Consolidated By -law References (Part 1) 61

TariffReference

Column 1


Column 2


Column 3

54.03

59.03

59.03

59.03

Yarn, flax(Op. 1.3.80 - Det. date 9.4.80 - BL 7951563)

"Enkafill" polyvinyl alcohol in31.12.81 -

rolls(Op. 7.7.80 - Det. date BL 8157169)

Mats, "Conan at" fibre- Det.

reinforced(Op. 9.11.81 date 1.1.83 - BL 8160454)"Orsol" non woven bonded fibre sheets, used as insoling material Inthe manufacture of footwear(Op. 24.8.82 - BL 81589411

59.16 Cotton belting, woven, endless, having a width of 81 an or more, of akind used with rotary baking machines(Op. 15.2.77 - BL 76623 71

59.17 Felts or fabrics having a width of 9 m or more, designed for use onpaper making machines(Op. 31.8.82 - BL 8250610)

61.01 "Sandvik" loggers' denim safety trousers(Op. 1.6.81 - Det date 16.2.82 - BL 8156034)

68.07 Goods made from ceramic fibre, as follows:(a) Cloth;

Paper having(b) a thickness of 3.5 mm or less;(c) Rope; or(d) Tape

16.11.82(Op. - BL B255231)

69.02

69.03

70.05

Insulating fire(ASTMCH37 -61(Op. 1.6.82

Permeable elementthrough theOp. 3

bricks type M -20 having an average densityrefers) of

8161442)29 lb/cu ft

- BLassemblies, designed for the injection of inert gases

bottom of basic oxygen steelmaking furnaces- BL 8250564)

Glass sheets, other than figured rolled glass, tinted or colouredprovided that

the massthe

- BL

tinting or colouring was physically Incorporatedin(Op. 24.5.77 7752120)

70.06 Glass,_''(Op.

protective.5.75 - BL 7550174)

70.06 Glass plate or float, coloured, single(Op. r20.7.76 - BL 7656068)

70.06 Glass,provided

other than figured rolled glass, inthat the tinting or colouring was

In the mass(Op. 24.5.77 - BL 7754613)

70.07 Glass float, plate or sheet, coloured, monolithic, heat reflecting(Cp. 14.3.78 - BL 7757852)

70.07 Glass, other than figuredtintingrolled glass, in sheets, tinted or

incorporatedcoloured,

provided that the or colouring was physically inthe mass(Op. 24.5.77 - BL 7754614)

70.07 Glass plate or- BL

float coloured, monolithic(Op. 15.2.77 7660982)

pane

sheets, tinted or coloured,physically incorporated

1924.1.831914.2.83

1914.2.831924.1.83

1928.2.83

1922.2.83

1924. 1.83

1922.2.83

1922.2.83

1928.2.83

1914.2.83

192 8.2.83

1914.2.83

1914.2.83

1914.2.83

1914.2.83

1914.2.83

62 Consolidated Bt-law References 'Part 11Commonwealth of Australia Ga:ette

No. P 9. 22 April 1983


70.17 Laboratory glassware, hygenic or pharmaceutical other than: 1922.2.83adaptors

apparatus, gas analysisbottles - dreschel , gas sampling or washingcells (cuvettes)chemistry setschromatographic columns and fittings thereforconden sor scylinders- nessler, separatingdilutersdispensers- kipps, tilt, mediaextraction apparatusflasks - dewar, kjeidahl, majonnier, rotary evaporative, vacuum,

boilingfunnels- dropping, powder, separatinggauges, rainmeasures - kippsmicroscope cover slipspipettes-pasteur micropumpsscoops, weighingseparators, modecular jetsplitting systemssplash headsstills-mercury, solvent, waterstirring rodsstopcockssyringes, chromatographictubes - centrifuge, combustion, test, gas samplIng or gas filtering,

drying(Op. 7.9.82 - BL 82 542 91 )

70.20 Woven high bulk boro silicate glass fibre fabric exceeding 1000 g /m2 19designed for use as welding splash blanket materials 17.1.83(Cp. 17.11.80 - Det. date 17.11.81 - BL 8060 311 )

73.11 Tees:Black, to which 73.11.11 applies, but not Including tees In the 19following sizes: 31.1.83

38.1 urnmn

x 38.1 err x 4.76 m50.8 x 50.8 mm x 6.35 mm76.2 mm

mm

x 76.2 mm x 9.52 mm101.6 x 76.2 mm x 9.52 mm

(Op. 22.2.77 - BL 7662386)73.13 Steel plates or sheets, clad with chromium, nickel, brass, leaded- 19

31.1.83copper or leaded -tin bronze(Op. 30.7.74 - BL 72 54389)

73.15 Molybdenum steel wire of the following chemical composition: 19Carbon - 0.42% or more but not exceeding 0.47% 28.2.83Manganese - 0.70% or more but

butnot exceeding 0.90%

Silicon - 0.20% or more not exceeding 0.30%Molybdenum - 0.20% or more but not exceeding 0.30%Sulphur - not exceeding 0.040%Phosphorus not exceeding 0.040%

(Op. 21.2.78 - BL 7762623 )

73.15 Round edge hot rolled steel flats to specification SAE 9260, in sizes 196.5 mm x 70 mm, 7.5 mm x 70 mm, 11 mm x 70 mm, 11 mm x 80 mm 24.1.83(Op. 20.7.82 - BL 8256142)

73.15 Steel bars, specifications .AISI -01, less than 6.35 mm thickness. The 19chemical percentage composition by weight of AISI -01 Is C 0.90/0.95, 21.2.83Mn 1.00, Cr 0.50

- Def.VO /trace, W 0.5/0.6 remainder Fe

(Op. 9.4.81 date 24.4.81 - BL 81 51 986)

73.15 Square steel bars bright finished, across flat dimentlons, as follows: 1940

(Op.mm, 45 mm 56 mm 60 mm, 70 mm 80 mm 90 mm, 100 mm 24.1.839.4.81 - let. date 24.4.81 - BL 81 51 983)

73.15 "Uranus" B6 stainless steel bars having a cross-sectional dimension not 19exceeding 8 mm 21.2.83(Op. 1.6.82 - BL 8252967)

73.18 Alloy steel tubes, other than honedwall

tubes, as follows: 19Containing chromium, but containing less than 10% chromium, with an 31.1.83OD exceeding 105 mm and thickness exceeding 5 m;Containing 12% or more chromium, annealed, having an OD greater than304.8 mm or wall thickness exceeding 4.06 mm(Op. 3.11.81 - BL 8159020)

.

Commonwealth of Australia Ga:ette;Vo. P 9. 22 April /983 Consolidated By-law References (Part ll 63

Tariff Item andReference Description of Goods Val Idity Date


73.18 Stress relieved cold drawn seamless tubing to specification JISG 3445/ 1924.1.83STKM -13C, having an CO exceeding 208.2 mm

(Op. 17.8.82 - 8L 8254088/73.20 Elbows to ASTM specification A234 WPB having a dia less than 406

than 406mm; 19

24.1.83Reducers to ASTM specification A234 WPB, having a dia less mm;Elbows, reducers or rtes to ASTM specification A234 WP 11(Op. 7.12.82 - BL 8255958)

73.20 Forged stainless steel flanges, specification ANSI B 16.5 material 19specification ASTM A 182 grade F304 S.S., raised or flat faced, weld 24.1.83neck, nominal bore size 495 mm or 590.6 mm(Op. 28.6.78 - Det. date 13.2.79 - BL 7857875)

73.24 Containers cryogenic, insulated or vacuum walI type, having a I iqui fled 19gas capacity of 175 L or less 24.1.83(Op. 28.1.76 - BL 7561660)

73.24 Gas cylinders seamless steel, capable of a working pressure of 1920.684 MPa

.81(3600 p.s.i .1 31.1.83

(Op. 1.11 - Det. date 12.10.82 - BL 81 61 004 )73.29 Chain fittings to

links,which 73.29.9 applies being detachable re- usable alloy 19

coupling of a kind used with alloy steel sling chain 28.2.83(Op. 20.3.73 - BL 7254823)

73.32 Pierce nuts 19(Op. 1.5.79 - Det. date 3.7.79 - BL 7953628) 24.1.83

73.32 Pins, spring steel, tubular longitudinally split 19(Cp. 8.5.81 - Det. date 11.8.81 - BL 8155391 1 24.1.83

73.35 Leaf spring bars as per drawing number 56-0 -1037, designed to be used 19in vibratory feeders 17.1.83(Op. 1.2.81 - Det. date 25.8.81 - BL 8151632)

73.40 Dees, webbing sling, choker or- BL

triangular types8158606)

19(Op. 2.9.81 - Det. date 25.1.83 28.2.83

73.40 Spring padding, laundry ironing machine 19(Op. 8.1.74 - BL 7358475) 24.1 .83

74.04 Slab casting10.8.82

mould Ifni plates, copper, zirconium and cnronlw alloy 19(Op. - BL 8157842 ) 24.1.83

74.11 Ribbon, woven, for use in the manufacture of electrostatic shields 1924.1.83for transformers, under security

(Op. 7.10.77 - Det. date 17.10.78 - BL 7763683)74.11 Wire mesh, knitted finer than 3 meshes /an 19

(Op. 26.3.74 - BL 1358457) 24.1.8374.19 Elements, steam filter 19

(Op. 27.4.79 - Det. date 26.6.79 - BL 7954405) 24.1.8376.04 Aluminium foil in widths not exceeding 75 mm, coated both sides with 19

an(Op.

adhesive 24.1.8318.5.81 - Det. date 13.4.82 - BL 81555711

76.06 Aluminium extrusions, tapered, of12.6.79

a kind used in the manufacture of 19yacht(Op.

masts 31.1.8313.12.78 - Det. date - BL 7953684)

82.01 Shears sheep, hand operated 19(Op. 36.4.82 - Det. date 25.1.83 - BL 8253763) 28.2.83

82.03 Strippers, designed for cuttinga

and stripping cable insulation, 19whether or not incorporating crimping

- BLor cutting facility 31.1.83

(Op. 5.10.81 - Det. date 12.10.82 8254483)

82.04 Tool kits detailed in64 -2220,

Tandy Electronics 1982 catalogue, as follows: 19la) Cat. alignment tool kit; 31.1.83(b) Cat. 64 -2223, TV

4 piecealignment tool kit; or

(c) Cat. 64 -2227 soldering kit(Op. 15.6.82 - BL 8250959)

82.05 "Minuteman"(Op. 8.6.82

standard stock broaches sets 19- BL 81 56894) 24.1.83

84.06 Engines, speed car racing, assembled or unassembled, aircooled or 19watercooled, manufactured by "Scat ", U.S.A. or "Cosworth" U.S.A. 24.1.83(Op 21.9.82 - Det. Date 1.1.83 - BL 8255486)

64 Consolidated By -law References :Part I) No. P 9, 22 .9pril 1083

TariffReference

Column 1

84.06



Column 3

4 stroke horizontal shaft petrol engines, imported separatelparts

KW 19or less at the manufacturers stated maximum rev /min (and 24.2.83therefor), to be:

(a) close coupled to pumps using the engine shaft directlyconnected to the pump impel for or

(b) close coupled to generators using the engine shaft directlyconnected to the rotor,

under security(Op. 21.9.82 - 5L 8254450)

84.10 Magnetic drive pumps having a

-capacity exceeding 26 Líminute at a 19

head exceeding 5m 31.1.83(Op. 1.12.81 - Det. date 16.11.82 BL 8156796)

84.11 Aerators aquarium, being electrically driven diaphram pumps 19(Op. 14.3.82 - Det. date 7.12.82 - 8253524) 31.1.83

84.11 Accessible or welded hermetic compressors of 5 kW rating or above, for 19use in packaged air- conditioning units under security 24.1.83(Op. 14.4.81 - Det. date 1.9.81 - BL 8157030)

84.11 Air compressors, having a max rated capacity not less than 1 180 L/s of 19free air delivered at a min gauge pressure of 689 kA 24.1.83(Op. 24.5.77 - BL 7752577)

84.11 "Westinghouse" air compressor brake systems, Type 3VC758, part no 190 76241001 designed for use in electric locomotives 24.1.83(Op. 30.3.K - BC 81 61 046 )

84.11 Fans, tube axial incorporating andesigned

integral motor, having a fan dia 19not exceeding 156 mm dia, for use in automatic data 24.1.83processing machines or installations(Op. 30.3. 82 - BL 8053973)

85.15 Aerial(Op. 30.3.82

systems, television, designed for use on ships 19- BL 8158549)

84.17 "Flex ipanel s", being electrically operated insulation panels designedliquids

19to be fitted20.4.82

to storage9159779)

vessels for the heating or cooling of 14.2.83(Op. - BL

84.18 Degassing and filtering units "Gautschi " for molten aluminium 19(Op. 1.5.82 - Det. date 13.7.782- BL 8256966) 28.2.83

84.19 Cigarette packaging machines 19(Op. 1 .6.80 - Det. date 5.8.80 - BL 7961 581 ) 14.2.83

84.19 Cigarette packet wrapping machines, automatic 19(Op. 2.9.75 - BL 755'7652) 14.2.83

85.19 Explosion proof switches actuated by flow or changes In liquid levels 19(Op. 1.1.71 - BL 7259954) 24.1.83

84.21 'Diversey" model1600

982 Thermo Fogger, Fog Guns,electrically

Fogmaster Tri Jetsfogging

or 19Misters model being hand held operated machines 24.1.83(Op. 16.3.82 - BL 6154915)

84.21 Hand held sprayers, electrically operated, capable ofrates

producing particle 19size down to 14 mass micron, adjustable to three output 24.1.83(Op. 16.3.82 - BL 82511431

84.21 Of 'mist lubricators, whether or not incorporating an air heater and 1922.2.83pressureOp.

switch, designed to be used for the lubrication of machinery27.10.81 - BL 8158258)

84.22 Emptlers bag 19(Op. 18.12.80 - Det. date 17.11.81 - BL 8063695) 24.1.83

84.22 'Puretic" power blocks designed to handle fishing nets 1924.1.83(Op. 28.9.82 - BL 81557822)

84.23 Attachments, dipperstick extendable, designed to increase the 19effective length of backhoe dippersticks 21.2.83(Op. 17.11.81 - Det. date. 25.1.83 - BL 8160861)

..,..

5

-

Commonwealth of Australia Gazette.Vo. P 9, 22 April 1983 Consolidated By -law References (Part It 65

TariffReference

Column 1

84.23


Item andDateVal Idity

Column 3

"Ingersoll- Rand" blast hole drilling machines, model numbers listed12 August

in 19the Table hereunder, provided the goods were ordered after 21.2.831982 and are entered for home consumption after 1 April 1983, but NOTincluding, when imported separately, extension drill equipment, asfollows:

- extension rodsshank rods

THE TABLEDM 20

25DM DDM M 45

DM 35 DM 50(Op. 28.9.82 - BL 8161188)

84.23 'Krupp' model DHR 80 mobile crawler wagon drilling machines but not 19including, when imported separately, extension drill steel equipment 24.1.83as follows:

- extension rodsshank rods

(Op. 3.8.81 Det. date 8.9.81 - BL 8157600)

84.25 Almond processing machinery as follows:(a) Destoners designed for the removal of heavy foreign material from

almonds;(b) Gravity tables designed for the

- BLgrading of almonds kernels

(Op. 1.1.81 - Det. date 17.11.81 81 51216)

1917.3.83

84.25 Cleaning machines, eanut7451851)

19(Op. 1.1 0.74 - BL 17. I.83

84.25 Pickers, cotton, but not Including the fol lowing parts when imported 19separately: 24.1.83

(a) doffer plates;(b) moisture Pads

BL 81(Op. 18.3.81 - 51 784)

84.25 Self- propelled combine harvesters having athan

threshing drum with a width 19not less than 1.219 m and a dia not less 450 mm 17.1.83(Op. 11.11.80 - BL 8061385)

84.30 Biscuit manufacturing machinery capable of performing ANY of the 19following functions: 7.2.83- cutting- forming- depositing

decorating(Op. 14.12.82 - BL 8255834)

84.33 Cutting machines, sheet, capable of handling materials at web widths 19of 1.7 m

1.7.8224.1.83

(Op. - Det. date 26.10.82 - BL 8254189)84.40 Dyeing machines as follows: 19

- "ATYC" brand - RapidAqualuftAqualuft

Suau S 28.2.83- "Gaston County" brands - Ct

- C- Aquavel

- "Platt Longclose" brand - Softflow atmospheric- Softflow high temperature- Uniflow- Ventura sprint

- "Proll and Sohmann" brand - Colorrnat- "Roaches" brand - Three Bath Fluid Bed Nik II- "Then" brand Economy

- KFA- Thenflow

- "Thies" brand - Echo -Soft- Rotostream

Softstream-(Op. 20.7.82 - BL 8253158)

84.40 Dry - cleaning machines to which 84.40.1 applies, using chlorinated or 19fluoro- chlorinated solvents as the cleaning fluid

7759077)31.1.83

(Op. 28.5.77 - Det. date 30.8.77 - BL84.40 Extractors, centrifugal, designed

liquidsfor use in the laundry and

or dyeingtextile 19

industries for removal of after the washing process 28.2.83(Cp. 28.7.82 - Det. date 1.1.83 - BL 8254057)

-

66 Consolidated By -law References (Part IlCommonwealth of Australia Gazette

.Vo. P 9. 22 April ;983

Tariff Item andDateReference Description of Goods Validity

Col umn 1 Col umn 2 Col umn 3

84.45 Goods, as follows, to which 84.45.91 applies: 19Drawing, forging, hammering, pressing, riveting or straightening 28.2.83machines but NOT including:

(a) machines (other than those designed soleley or principallyfor preparing or working printing blocks, plates orcylinders) as follows:

( i ) curving, straightening grooving'metaledging or seaming

machines for working sheet (irrespective ofgauge);

(ii) presses, forming, including such machines that formand cut;

(iii) riveting machines, non - pneumatic, rotary spinning,having a stroke not exceeding 50.8 mm;

(b)(Op. 5.5.81

portable hydraulic roll swaging machines- BL 8153892)

84.45 Goods to which 84.45.99 applies, but NOT including: 19(a) polishing machines;drills;

28.2.83(b)(c)

railrail saws

(Op. 25.5.78 - Det. date 4.7.78 - BL 7854422)84.47 Belling machines, automatic, of a kind used to enlarge ends of plastic 19

pipe for joining 24.1.83(Op. 30.7.74 - 8L 7453747)

84.47 Jigsaws, Dremel moto -shop models 576, 577 19(Cp. 10.8. 82 - BL 8055992) 24.1.83

84.48 Collets being G.M.H. part Nos. 0016- 510 -66 0016- 510 -67, 0016 -510 -125, 1924.1.830016 -510 -131, 0016- 510 -132, 0016 -510 -133, 0016- 510 -229, 0016 -510 -239,

0016- 510 - 241, 0016 -510- 242, 0016 -510 -245, 0016 - 510510

-251 0016 -510 -262,0016 - 510 -300, 0016 -510 -310, 0016- 510 -362, 0016- -363'(Op. 13.4.82 - BL 8154463)

84.54 Computer graphicsAdvanced

display terminals:Design, modelsElectronic

AED 512;

Aydin5215

model s -5105 5205A

520585405 5525 5576 8018 8040 8295

5216 5114 5406 5550A5571

5804 8019 8063 839552175217CT

51155116

5212 55185520

8013 8037 8067 881088305214 5375 8017 8039 8250

RS0 -27;

Chromatics, modelsCG1399CG1599

CG3999CG5599

CG7900

Consolidated Electronic Industries, models -CD 33GO 33;

Control Data Corporation, model -4003-21;

Data General model -Dasher G30ó;

Digital Equipment, model -VT125;

Hewlett Packard, models -2623A262 9G264 7A2647E264 8A26490

with or without any or all of016,

the following options003, 004, 007, 013, 015, 030, 032, 033, 034, 054, 096, E34;

IBM models -3251;

ID Systems Corporation, model -ID-100;

1931.1.83-

Commonwealth of Australia Ga:etteNo. P 9, 22 April /983 Consolidated By -law References (Part l) 67


84.54 Computer graphics display terminals: continued 19Intecolor, series -

8000830089003600;

Intergraph, modelsDSPODSP025;

Microtel, model -VTX202;

TAB -EDP Systems, modelTAB 132/150.

Tektronix, models -4006 4025 4027A -14006 -1 4025A 402 7A-24010 4025A -1 4027F304010 -1 4025A -2 41124012 4025A -3 41134012 -1 4025A-4 41144014 4025A -54014 -1 4025A-64016 4025F304016 -1 4027A

with or without any or all of the following options;1, 7, 3, 4, 4A, 48, 4C, 4E, 4F, 5, 6, 10, 11, 12, 13,14, 20, 21, 22, 24, 25, 26, 27, 28, 29, 30, 31, 32, 34,36, 38, 40, 41, 42, 43, 48, 49, 52, Al, A2, A3, A4;

Vector General, model -VG 82 50

Visual, models -500550;

(Op. 14.12.82 - BL 82 55880)NOTE:

Any addition to the above, being either the product of one ofthe above or some other manufacturer, will be considered uponreceipt of an ad -hoc by -law application

84.54 Punching machines, hand operated, for punching two, three or four 19round Holes In pages prior to insertion in binders and the like 28.2.83(Op. 8.6.82 - Det. date 7.12.82 - BL 8254507)

84.59 Arches and platforms, mobile, designed to be used ¡n bricking 19rotary kilns 28.2.83(Op. 14.12.82 - BL 82 55971 )

84.59 Blow moulders, but NOT including deflashing and punching stations 19(Op. 3.8.82 - BL 8253518) 31.1.83

84.59 Compression machines vertical four or six cavity, with steam and water 19cycle(Op.

designed for thethe of expandable polystyrene cups 24.1.83x10.10.81 - BL 81 581 00)

84.59 Cooling drums rotary, designed tosand after

tumble, demoisturise, cool, clean 19and separate hot castings from the casting process 24.1.83(Op. 30.3.82 - BL 81 586 82 )

84.59 Deflashers cryogenic shot blast, having a capacity of 0.1133 cu m 19(Op. 7.9.8x2 - BL 8251402) 24.1.83

84.59 Lime slaking machines 19(Op. 27.3.81 - Det. date 28.7.81 - BL 8154046) 24.1.83

84.59 Reinforced reaction injection moulding machines 19(Cp. 25.5.82 - Det. date 7.12.82 - BL 8253045) 31.1.83

84.59 Socketing machines, designed to socket PVC pipes 19(Op. 25.5.82 - Det. date 5.10.82 - 8L 8252999) 24.1.83

84.59 Testing machines, for ascertaining the effects of weathering of 19materials made for outside use by means of electirc arc lights and 24.1.83water spray nozzles reproducing the action of sunlight and moistureand temperature changes in predetermined cycles(Op. 1.1.71 - BL 72587671

-

68 Consolidated By -law References Part 1)Commonwealth of Australia Gazette

;Vo. P 9. 22 April 1983

TariffReference

Column 1

84.59

84.61

84.61

84.61

84.61

84.61

84.61

84.63

84.63

84.65

84.65

84.65

85.01



Column 3

Tyre retreading machines automatic "Orbi tread" models 200 or 220(Op. 8.6.82 - Det. date 16.11.82 - BL 8056666)

1924.1.83

Aerosol vavles, designed for use with glass containers 19(Op. 6.4.82 - BL 8251332) 28.2.83Beer keg285/376,

adaptor valves or extractor valves to Australian Patentsdesigned for filling or dispersing draught beer

(Op. 11.10.82 - Det. date 25.1.83 - BL 8255553)Pilot assisted overcentre valves with working pressures up to amaximum of 34.47 kPa

Det. date(Op. 21.6. e2 - 30.11.82 - BL 8058545)

Single gauge isolator valves, "Hydac" model MAi, designed forhydraulic power units(Op. 29.5.82 - Det. date 3.8.82 - BL 8253520)

Valve connection blocks (alsoincorporating

known asintegral

manifold orfilter, asvalve- interfaceadaptor blocks) an follows:

Hydac models VAB 10HHydacHydac

models VAB 10Lmodels VAB 6H

HydacNOTE:

models VAB 6L

Additional brand names and model numbers will beBranch,

addedBureau

to the liston

(Op. 1.1.81receipt of a submission to the By -law of Customs

- Dot. date 28.7.81 - BL 8154430)

Aerosol vavles, designed for use with glass containers(Op. 6.4.82 - BL 825T332)Hub to shaft connectors with integral locking

8250483)capability

(Op. 23.4.81 - Det. date 16.2.82 - BL

1921.2.83

1931.1.83

1924.1.83

1921.2.83

1928.2.83

1925.2.83

Transmission parts to which 84.63.22, 84.63.23, 84.63.29 or 1984.63.9 applies being parts for complete goods to which, ff 28.2.83imported, Item 19 in Schedule 4 to the Customs Tariffwouldunder

apply by virtue of a By -law or determination madePartapply,

of the Customs Act(Op. 1.1.83 - BL 8255215)

Flow dividers, hydraulic circuit28.7.81

1931.1.83(Op. 17.3.81 - Det. date - BL 8153225)

Gas springs, designed to be used in chair manufacture 19(Cp. 1.8.81 - Det. date 3.11.81 - BL 8155873) 24.1.83Woodruff keys(Op. 5.6.81 - Det. date 28.7.81 - BL 8156348)AC Induction motors of the following types:

- Vertical shaft flange mounted squirrel cage;- Horizontal shaft flange mounted squirrel cage; orSlipring Induction motors,as follows:

1924.1.83

1924.1.83

Poles Configeratton Rated Output Exceeding2 pole 30D

560kWkW4 pole

6 pole 400 kW8

Pwpo°Ìe

300 kW10 220 kW12 pole 150 kW14

1.4.83 -poleDet.

and over No limit(Op. date 27.7.82 - BL 8253159)

85.01 Battery chargers, consisting ofD

asize, C

cabinet incorporating a power 19supply, suitable for chargingcell

8254590)

size, AA,singly

MA, 6V and 9V 21.2.83nickel(Op.

cadmium or- BL

dry batteries, either or in multiples12.10.82

85.01 Motors, DC, with reduction 6 V - 24 V torque 25 -150 N.m with integrated 19gear`Op.

boxes, designed for applications which require a driving system 24.1.8311.11.80 - Det. date 11.11.81 - BL 8058601)

85.01 Outboard motors, 12 V DC 0.75 kW output power 19(Op. 1.1.81 - Det. date 8.12.81 - BL 8159835) 24.1.83

85.05 Saws having a reciprocating blade mounted on a free - floating swivel,designed to cut sheet materials(Op. 30.3.82 - BL 8160479)

1924.1.83

XVI

Commonwealth of Australia GazetteNo. P 9, 22 April 1983 Consolidated By -law References (Part II 69

TariffReference

Column 1

85.09

85.11


Column 2 Column 3

Driving lamp, fog lamp or headlamp inserts for use otherwise than In 19the manufacture of motor vehicles in compliance with the Government's 24.1.83Motor Vehicle Plan(Op. 1.10.81 - Det. date 2.2.82 - BL 8159796)

Removers, automotive dent, of a kind used for removing dents by 19retraction electrodes or retraction electrode hammers 22.2.83(Op. 21.4. 76 - BL 7556899 )85.15 Aerial systems, television, designed for use on ships 19(Op. 30.3.82 - BL 8158549) 24.1.8385.15 Antenna tuners covering amateur radio bands 3.5 MHz to 30 MHz 19

31.1.83(Op. 14.9.82 - BL 8251037)

85.15 Buoys, maker, radio, fishermens 1 ine, capable of emitting 1931.1.83intermittent morse code signals

(Op. 10.2.72 - BL 7264806)85.15 1f radio and navigational aid apparatus approved as suitable for 19Installation on

navigation (Radio)compulsorily fitted vessels pursuant to regulation 9 28.2.83of the Regulations, but NOT including ANY of thefollowing:

If AM and SSB transceivers up to 100 W AM, or up to 150 W PEP SSBaerial inputs, VHF FM simplex radio telephones having output

stationspowerof 25 W or less for mobiles and 50 W or less for base

(Op. 23.11.82 - BL 8254807)

85.15 "PAL" Television waveform Monitors, type V-098 1931.1.83(Op. 11.5.82 - BL 8160824)

85.15 Teleprinting systems,equipment

of a kind used with radio transmission and 1931.1.83broadcasting

(Op. 1.1.79 - Det. date 24.4.79 - BL 7952689)85.15 Transponder systems, microwave, "Setrid" manufactured by Siemens, 19

comprisinng anBsponders3ajd interrogators 24.1.83

85.15 Video character capable of composing alpha - numeric messages 1924.1.83(Op. 5.3.74 - BL 7360466)

85.17 "NAP" boards beingdisplaying pluralmiroccmputer controlled multiple display billboards 19

capable of message patterns by the use of floppy discs 24.1.83or from other inputs(Op. 30.3.82 - BL 8157701 )

85.18 Reprographic capacitors, non poly- chlorinated hiphenol, having voltage 19ratings exceeding 1200V AC 24.1.83(Op. 30.3.82 - BL 8058249)

Carbon track potentiometers- 7559313)

1910p. 13.4.76 31.1.83

85.19

85.19 Circuit breakers, 22 kV, 24 kV, 33 kV or 36 kV for indoor use, 19under security 28. 2. 83(Op. 25.9.79 - Det. date 18.12.79 - BL 7960801)85.19 Circuit breakers, less than 8 A with thermal rating in accordance 19with ASCII I

1.1.71 21.2.83(Op. - BL 72597581

84.19 Explosion proof switches actuated by flow or changes in (quid levels 19(Op. 1.1.71 - BL 7259954) 24.1.8385.19 Fault make load break isolator switches, current rating 100A to 400A

(both inclusive), designed for use in ant lent conditions of up to100% humidity at temperatures exceeding 40 °C(Op. 16.4.82 - Det. date 16.11.82 - BL 8153132)

85.19 Fuse linesthyristor for the protection of semi- conductor rectf f fer andcircuits(Op. 22.6.82 - BL 8159661 )

85.19 "Littlefuse" fuses being series: 262 265, 266, 267 268, 269,or 334

272273, 274, 275, 276, 277, 278, 279, 280, 281, 282, 284(Op. 1.3.82 - Det. date 16.1182 - BL 8251633)

85.19 Micramovement or pressure operated keyboard switches and switchingsystems(Cp. 31 .8.82 - BL 8252394)

1914.2.83

1924.1.83

1921.2.83

1924.1.83

Op. BL 8

generators,

Commonwealth of Australia Gazette70 Consolidated By -law References (Part /I No. P 9, 22 April 1983


85.19 Potentiometers fitted with resistance tracks made from cermet 19materials, conductive plastic or refractory ceramic 31.1.83(Cp 110.80 - Det. date 18.3.81 - BL 8151488)

85.19 Potentiometers, having a resistance accuracy of better than 0.5% or a 19positional or independent linearity of better than 1% 31.1.83(Op. 30.1.74 - BL 7259856)

85.19(Ópr3typeLtepotentiometers, exceeding 100 W

19.1.83

85.19 Programmable controllers and sub- assemblies and accessories therefor, 19for the following programmable control systems: 31.1.83

Allen Bad ley Min f- PLC -2 FLC -2/20, FLC -2, Mini- PLC -2/15, FLC -30,Bulletin 1774 PIC, PLC -3;

ASEA -PLC 700;Boyer iBrown Procontic DP 800, Indactic 61;

Cutler Hammer D120;Durant 6500 -450;Eagle Signal Eptak 200,

Series700,Six,

FM50 series;General Electric Logitrol 500, Logitrol 550,

Logitrol 400;Gould Modicon 184

C384, 484, 584 1084 Micro 84 2184;

Hitachi C -24, -46A, P-I20, P -250, P10ó0, C64, C32, C64;Honeywell Director 1001 3001 4001;Industrial Solid State Controls Inc ipc 90,300;ITT Director 2000 Deputy, upervisor;Kleckner- Moeller tucos PS22, PS24;Landis and Gyr series PCA1 PCA2, PCA11, PCA12;Mitsubishi Meisec series, llelplac series;Nissan NESP;Omron Sysmac RD, P1, P7, FOR M1 PSR;Rel lance Electric Automate 3 31L;Siemens Simatic S3, S5, S5 -210A, C;Sprecker and Schuh Sestep series 400 500, 530;Square D Class 8881, Class 8884, Sy /tax;Struthers Dunn Inc. 1001, 3001 4001;Tel em ac an ique TS X21, TSX60 TS X80, TSX90;Texas Instruments series 51-1, 6MT, FM550, 7MT, 510, 8PC, VPU,

VPU 520,

-

VPU 530Westinghouse Numaloxgic PC700 PC900;

(Op. 19.8.81 Det. date 31 .8.82 - 8L 8254089)85.19 Programmable controllers and sub assemblies and accessories therefor, 19

21.2.83for the following programmable control systems:Allen Bad ie Mln1 -PLC -2

PLC -3;PLC -2/20, FLC -2, Mi n f-PLC -2 /1 5, PLC

Bulletin 1774 PLC,ASEA-PLC 700;Brown Boyer! Procontic DP 800, Indactic 61;Cutler Hammer D120;Durant 6500 -450;Eagle Signal Eptak 200, 700, FM50

Logitrolseries;

General Electric Series Six, 500, Logitrol 550,Logitrol 400;

Gould Modicon 184 384, 484,P584 1084

P1000,Micro 94 2184;

Hitachi - 120,C -24, C -40A P -250, C64, C32, C64;Honeywell Director 1001 3001 4001;Industrial Solid State Controls Inc ipc 90,300;ITT Director 2000 Deputy Supervisor;Kleckner - Moeller tucos PS22, PS24;Landis and Gyr series PCA1 PCA2, PCA11, PCA1 2;Mitsubishi Melsec series, ttelplac series;Nissan NESP;Omron Sysmac FO, P1, P7, FOR M1, PSR;Reliance Electric Automate 3 31L;Siemens Simatic S3, S5, S5 -21 OA, CSprecker and Schuh Sestep series 400, 500, 530;Square D Class 8881, Class 8884, Sy /Max;Struthers Dunn Inc. 1001 3001 4001Tel emacan I que TS X21, TSX60, TS5(80, TSX90;Texas Instruments series 511, EMT, FM550, 7MT, 510, 8PC, VPU,

VPU

19.8.

520, VPU 530Westinghouse Numalogfc PC700 PC900

(Op. 81 - Det. date 1.2.83 - BL 8330223 )

85.19 Programming boards, matrix, and programming pins therefor(specifically designed for mounting on printed circuit boards)(Op. 31.8.82 - BL 8251618)

85.19 Push button keyboard switches with terminals for direct soldering onprinted circuit boards(Op. 14.11.80 - Det. date 2.6.81 - BL 8062705)

1931.1.83

1928.2.83

30.1.74 - BL

Commonwealth of Australia GazetteVo. P 9, 22 April 1983 Consolidated Br -law References (Part 11 71

TariffReference


Col Linn 1 Column 2 Column 3

85.19 Push button switches fitted with P.C. pins on a 5.8 an grid,singly

suitable 19for direct soldering on printed circuit boards either or in 28.2.83switching modules(Op. 27.7.82 - BL 8252277)

85.19 Relays of the low profile type, other than reed relays, of a kind used 19for printed circuit mounted: 24.1.83

(a) with a height not exceeding 20 mm; or(b) with a height no exceeding 35 mm and a continuous contact rating

of not less than 8 A AC(Op. 25.5.71 - BL 7259888)

85.19 Rotary switches, two operating positions, double break with reverse 19knife contacts and arc quenching devices, independent helical

capacityspring 24.1.83

oppeeration (fault make /load break), in excess of 750 A(Op.

Rotary

21.9.82 - BL 8052922)

85.19 thumbwheel potentiometers 19(Cp. 20.8.74 - BL 7453481) 31.1.83

85.19 Servo operated30.1.74 -

potentiometers 19(Op. BL 7356183) 31.1.83

85.19 Single turn wire wound potentiometers having an OD not exceeding 13 mm 19(Op. 26.4.77 - BL 7750811 31.1.83

85.19 Slider type potentiometers, being: 19(a) Screw adjustment; or 31.1.83(b) Other than wire wound, operated by a sliding shaft

(Op. 29.7.75 - BL 7556086)

85.22 Consoles control teacher's7751 7231

of a kind used in language laboratories 19

(Op. B.1í.77 - BL 24.1.83

85.22 T.Y. test signal generators canprising mainframe and plug in modules 19including V.1.T.S. and P.L.U.G.E. signals in accordance with C.C.I.R. 24.1.83recommendations, designed for use in the adjustment, testing andmeasurement of video equipment(Op. 17.8.82 - BL 8252794)

85.23 Cables, when imported with connectors, multi- strand, specifically 19designed for mass termination in the mainframe of a compute-, or 21.2.83between the mainframe and peripheral devices(Op. 26.5.81 - Det. date 8.12.81 - BL 8158873)

87.01 Tractors to which 87.01.900 applies capable of producing 220 kW or 19greater at 2100 rev /min, but NOT including: 20.1.83

(a) scraper tractors; or(b) used or secondhand tractors

(Op. 30.3.82 - Det. date 11.5.82 - BL 8252442)

87.02 All terrain motor vehicles being Argo 6, Argo 8, Sidewinder or Hustler 1917.1.83models

(Op. 9.8.82 - BL 8254082)87.02 All

250terrain vehicles, single seater, four wheeled, incorporating a 19cc belt driven 2 stroke engine 1 7.1.83

(Op. 30.9.8D - Det. date 5.5.81 - BL 8061129)

87.06 Track shoe assemblies, assembled or unassembled, for track - laying 19tractors and parts for such assemblies, other than shoes 21.2.83(Op. 1.1.83 - BL 8255390)

90.03 Mounts sunglass, designed to clip on to optical spectacles 19(Op. 1`1.2.81 - BL 81 51090) 31.1.83

90.10 Photographic processors, rollersensitized

transport,but NOT

designed forIncluding

the processingof the

19of photographic materials, ANY 24.1.83following:

(1) process cameras, whether imported separately or otherwise;(If) processors used for the processing of roll type film;(ill) processors where prints are made on rolls of paper and then cut

to individual prints or series or prints(Op. 1.1.82 - Det. date 19.10.82 - BL 8255071 )

90.10 Processors and

22.4.81 -printers,

Det. date

designed to produce diazo duplicates of 19microfiche 21.2.83(Op. 27.10.81 - BL 8155372)

Commonwealth of Australia Gazette72 Consolidated By -law References (Part 1) No. P 9, 72 April 1983

TariffReference

Col torn 1

90.16

Description of GoodsCol umn 2

lien andValidity Date

Column 3

Levels, precision, Engineers', as follows:(a) capable of measuring a gradient and being graduated

in divisions measuring an incline fran the horizontalof not less than 1 :12000; or

(b) having the horizontal vial mounted above the body of thelevel, in a revolving tube between adjustable supports(Op. 7.4.81 - BL 8152792)

1922. 2.83

90.17 Contra angle dental handpieces, ball - bearing type, for attaching to 19tow speed air driven or mechanical handpieces for the purpose of using 31.1.83angle(Op.

burs11.1.72 - BL 7260817)

90.17 Dental handpieces, having adate

maximum speed not exceeding 60 000 rev /min 19(Op. 10.6.81 - Det. 25.8.81 - BL 8156672) 1.2.83

90.24 Manometer, but not including the following: 19flexible tube manometers; 24.1.83U -tubewell

type manometers;type manometers

(Op. 1.1.71 - BL 7261100)90.24 Pressure gauges, nominal outside dia 50 mm or 55 mm

notdesigned for use 19

with compressed industrial or medical gases, but including gauges 1.2.83for use with compressed air(Op. 17.9.80 - Det. date 3.12.81 - BL 8160184)

90.24 Robertshaw thermostats in the fol lowing series: 19AP AT, FS, GFS, as manufactured by: 24.1.83

Robertshaw Controls Co., U.S.A.Carp n le Europeenne des Thermostats S.A. FranceRobertshaw Orient Ltd, JapanPrecision S.A. MexicoControl Robertshaw razil S.A. Brazil

(Op. 20. 12.77 - BL 7651 621Co.,

)

90.28 Miniature recorders as follows: 19"Philips" model PM8f 1 0; 21.2.83"Rustrack" series 400A, 1400A 3400A, 4300A 4388 and ADC versions(Cp. 1.6.82 - Det. date 2.11.82 - BL 8255561)

90.29 Thermostat parts, being parts1.1.83 -

for Renco thermostats types SA, F53, F56, A50 19or A59 24.1.83(Op. 1.4.82 - Det. date BL 8252638)

92.11 Sound reproducers having a nominal voltage of 6V and/or 12 V DC, 19designed for installation in motor vehicles, but not including sound 14.2.83reproducers incorporating or imported with speakers, being soundreproducers for use otherwise than in the

8158928)

manufacture of motorvehicles in cane! lance with the Government's Motor Vehicle Plan(Op. 9.9.81 - Det. date 17.11.81 - BL

92.11 Tape decks, cassette or cartridge, other than of a kind used in motor 19vehicles or for background music systems 14.2.83(Op. 1.1.79 - Det. date 17.7.79 - BL 7955888)

parts93.06 Gunstocks to which 93.06.1 appl les being forTariff

goods which, if 19imported, item 19 in Schedule 3 to the Customs would apply by 17.1.83virtue of a by -law or determination made under part XVI of the CustomsAct(Op. 1.1.83 - BL 8255437)

94.01 Car seats designed for handicapped children 19(Op. 9.9.82 - Det. date 25.1.83 - BL 8254828) 26.1.83

98.03 Lithographic film-

opaquing pens(Op. 7.8.78 Det. date 28.11.78 - BL 7859167)

1924.1.83

Commonwealth of Australia GazetteNo P 9. 22 April 1983 Consolidated By -law References ( Part 11) 73

Customs Act 1901

Notice of Determination Under Part XVI

The Minister of State for Industry and Commerce, Senator John N. Button, In pursuance of Section


Act, revoking earlier Determinations referred to in the Table appended hereto

As a consequence of the revocations herein notified, the relative references to the Determinations

concerned which have been included in the departmental publication "Consolidated By -law References ",

and which are more particularly identified in the Table, have been cancelled


(i) The klnd(s) of goods to which the Determination applies, the commencing date of the

Determination and the By -law number;

(ii) The item in Schedules 3 or 4 to the Customs Tariff Act 1982 as proposed to be amended which

shall apply to the goods and the validity date (date of cancellation). Where the item is

shown in the form of 4 figures or more it is an item of Schedule 3 and where a 2 figure item

Is shown It is an item of Schedule 4.

-

74 Consolidated By -law References (Part ll)Commonwealth of Australia Gacette

No. P 9. 22 April (947

Description of GoodsColumn I


Column 2

Blankets, printers'; of endless (circular) construction, but NOT 19including stereo or engravers blankets 24.1.83(Op. 22.6.82 - BL 8252797)

Card frame and module mounting systems designed for the storage of 19printed circuit boards and plug In modules, but not Including 24.1.83aluminium sheet panel sections(Cp. 1.4.79 - Det. date 3.7.79 - BL 7854076)Goods (including parts therefor unless specifically excluded) 19as listed in

electric,Table A, for use in: 7.2.82

(a) diesel electric or diesel hydraulic railwaylocomotives; orelectric,(b) diesel electric or diesel hydraulic railwaypassengersecurity

vehicles,under

TABLE A

(a)(b)

Air suspension springsAxle (journal) bearings

(c) Bogie suspension rubber elements(d) Cardan shafts(e) Dynamic brake units (whether or not incorporating integral

blowers) but not including resistance grids whether importedseparately or otherwise

(f) Eddy current clutches(g) Electrical control equipment (but not Including any goods, and

separatelyparts therefor, listed in Table B, whether importedor otherwise) designed for use in controlling:

(1) the operation of the diesel engine;(ii) generators;

(iii) auxiliary machines;(iv) traction motors;(v) brakes and switching; or(vi) motor alternator sets

(h)(i) Engine cooling fans incorporating integral drive motorsFriction snubbers(j)

(k)Fuel gauges (glow rods)

assemblies,bearings

Heater indicator smoke or odour type, designed tobe used with roller

( I) Motor alternator sets(m) Oil pumps, for use in gearboxes rated in excess of 299 kW(n) Sealed beam lamps for headlights(o) Speed indicating and recording

for useequipment

axle(p) Torque reaction pads with drive gearboxes(q) Transmission oil coolers and impel lors(r) Wheel flange lubricator s(s) Windscreen wipers

TABLE B

(a) highplugs and

tension fuses(b) receptacles (jumper couplings)(c) resistors(d)

(Cp.resistance grids for brake systems

1.7.82 - Det. date 14.12.82 - BL 8254882)

Commonwealth of Australia Ga:etteivo. P 9, 22 April 1983

Consolidated By-law References (Part II) 75


Column 1

Item andVal idity Date

Column 2

Goods (including parts therefor unless specifically excluded)as listed in Table A, for use in:

(a) electric, diesel electric or diesel hydraulic railwaylocomotives; or

(b) electric, diesel electric or diesel hydraulic railwaypassengersecurity

vehicles,under

TABLE A

(a) Air suspension springs(b) Axle (journal) bearings(c) Bogie suspension rubber elements(d) Cardan shafts(e) Dynamic brake units (whether or not incorporating Integral

blowers), but not including resi stance gr ids whether importedseparately or otherwise

(f) Eddy current clutches(g) Electrical control equipment (but not including any goods, and

parts therefor, listed in Table B, whether imported separatelyor otherwise) designed for use in controlling:

(I) the operation of the diesel engine;(ii) generators;

(iii) auxiliary machines;(iv) traction motors;(v) brakes and switching; or(vi) motor alternator sets

(h) Engine cooling fans incorporating integral drive motors(i) Friction snubbers(i) Fuel gauges (glow rods)(k) Heater indicator assemblies, smoke or odour type, designed to

be used with roller bearings(I) Motor alternator sets(m) Oil pumps, for use in gearboxes rated in excess of 299 kW(n) Sealed been lamps for headlights(o) Seed indicating and recording equipment(p) Torque reaction pads for use with axle drive gearboxes(q) Transmission oil coolers and impel lors(r) Wheel flange lubricators(s) Windscreen wipers

TABLE B

(a) high tension fuses(b) plugs and receptacles (jumper couplings)(c) resistors(d) resistance grids for brake systems(e)

(Op.circuit breakers

- BL8.2.83 8330295)

1928.2.83

Commonwealth of Australia Gazette76 Consolidated By -law References (Part Ill No. P 9, 22 April 1983



Column 2

Goods to which a tariff classification specified in the Tablehereunder applies that -(a) have been sent by a person outside Australia as an

unsolicited gift to a person resident In Australia;(b) are not entered to be used for any commercial purpose,

including sale, lease, hire or exchange; and(c) are not in such a quantity that that quantityrepresents a commercial quantity.

See Table31.1.83

Tariff Classification

39.01.3139.02.3139.03.3139.07.2140.13.242.03.350.09.951 .04.955.0855.09.455.09.51155.09.51255.09.51356.07.959.08.360.03.160.04.160.04.2160.04.2960.04.3160.04.3960.04.460.04.960.05.1260.05.1360.05.1460.05.1560.05.1960.05.661.01.361.01.461.01.5

61.02.361.02.461.02.561.02.661.02.961.03.261.03.361.03.961.04.161.04.261.04.3161.04.3961.04.961.09.161.09.262.02.262.02.562.02.664.01.9164.01.9964.02.9164.02.9964.03.9164.03.9964.04. 9164.04.9964.0594.04.2(Det. date 31.12.81)

THE TABLE

By -lawand

ProvisionValidity Date

401411421431441452472482492502511521531542551562572582592602612622632642652662672682692702712722

742752762772782792802812822832842852862872882892902912922932942952962972982992

10011011

Operative

BL 81 60905BL81609068L81609078L816090881.8160909BL8160910BL8160911BL8160912BL 81 6091381.8160914BL8160915BL81609168L8160917BL8160918BL8160919BL8160920BL81609218L8160922B1.8160923BL8160924BL 81 60 925BL816092681.81 60 92 7BL8160928BL81 50929BL8160930BL8160931BL 81 60932BL8160933BL 8160 9348L816093581. 81 60 936BL81609378L81 60938BL8160939BL8160940BL8160941BL 81 60942BL8160943BL8160944BL8160945BL 81 60946BL81609478L81 60948BL81 609498L8160950BL81609518L8160952BL81609538L816095481.816095581.81 60956BL8160957BL 81 6095881.816095981.8160960BL8160961B1.8160962BL81609638L816096481.81 60965

( 1 .(1.(1.(1.(1.(1.(1.(1.( 1 .(I.(1.(1.(1.(1.(1.(1.(1.(1.( 1 .(1.(1.(1.(1.(1.(1.(1.(1.(1.(1.( 1 .(1.( 1 .(1.( 1 .(1.(1.(1.(1.(1.(1.(1.(1.(1.(1.(1.( 1 .(1.(1.(1.(1.(1.( 1 .(1.( 1.(1.(1.(1.(1.(1.(1.( I .

.82)

.82)

.82)

.82)

.82)

.82)

.82)

.82)

.82)

.82)

.82).82).82).82).82).82).82).82).82).82).82).82).82).82).82).82).82).82)

.82)

.82)

.82)

.82))

.82)

.82)

.82)

.82)

.82)

.82)

.82)

.82)

.82)

.82))

.82)

.82)

.82))

.82)

.82)

.82)

.82)

.82)

.82)

.82)

.82)



Column 1 Column 2

Goods that are for use in connection with the exploration forpetroleum or

-headthe development of petroleum wells to the stage where

the well assembly is attached, under security, but not including :Goods for, or in connection with cou vll ln9 irea I , .,u,rveylny ustoring petroleum after leaving the well

or accessories-head assembly, or any of the

following goods and parts therefor or for use therewith,viz(a) apparel of any kind;(b) bits rock drilling of the rotary or rotary percussive type;(c) capstans, with a- without power take-offs;(d) christmas tree equipment;(e) cranes;

davits;(f)(g)(h)

desal inators;drilling machines either barge, skid, trailer or vehiclemounted, capable of drilling holes to a depth not exceeding1525 m;

(I) drilling platforms or steel structures being components orsub-assemblies for drilling platforms;

(J) earthmovIng machines, machinery or vehicles;(k) flanged drilling- through equipment;( I) goods for use in connection with -

(1) raising of petroleum to the well -head; or(if) controlling treating, storing or conveying petroleum

raised to the well -head;(m) land platform or marine wel I -head equipment as fol lows:

(1) adaptors;(ii) casing connectors;

(Ill) casing heads casing housings;( 1v) cross -over fl,(v) drilling templates, guide bases and guide

butframes;

(vi) hanger /packer mechanisms, seal assemblies, notexcluding liner hangers, production packers and theirassociated running and retrieving tools;

(vii) mudline casing suspension equipment;(vili) spools;(ix) tubing heads;(x) wear bushings and bowl protectors;

(xi) well -head and conductor housings;(xi r) well -head connectors;

(XIII) wel -head systems assemblies or(xlv) running, retrieving and testing tools for use withequipment shown In m( i) through (xfii)

(n) lubricants and fuels of any kind (not being additives orconditioning agents as used with drilling muds);(o) natural barium sulphate;

(p) pneumatic pressure vessels, of a kind used for handling bulkmaterials;(q) ring joint flanges;(r) vehicles to which 87.01, 87.02, 87.03, 87.07 or 87.14 applies(s) shackles;(t) ships, boats or other floating structures;(u) transportable accommodation units for use as offices, living

quarters and the I Ike;(y) valves to which 84.61 applies, not being valves which, at the

time of entry for have consumption, a by -law orSchedule

determinationissued under the provisions of item 19 in 4 to theCustoms Tariff Act 1966 is in force;

(w) welding machinesbore casing

and materials;(x) well centrallsers and stop rings for use therewith;(y) winches, with or without power take -offs; or(z)(a) wire rope

wire(z)(b) woven screencloths (also known as shale shaker screensor mud screens), designed for use in conjunction withfiltration and shale shaker equipment

NOTES:(A) For the purpose of this by-law, petroleum includes

natural gas(B) A reference to "Parts" is not restricted to parts that

have the sane tariff classification as the wholegoods of which they will form a part or with whichtheyThe

are for use(C) reference to "Goods" Includes whole goods, parts,

accessories, mechanical driving units restrictedonly to the extent of the exclusions (if any) setout in the preamble to the by-law and the clauses (a)to (y)

(D) For the purposes of clauses (d) (k), (m) and (q)the words used shall be deemed to have the sanemeaning as that given to them In American PetroleumInstitute (A.P.I.) specification 6A

(Op. 1.1.83 - BL 8255424)

1924.1.83

Commonwealth of .4ustralia Garette78 Consolidated Bt -law References (Part 1/I Vo. P 9. 22 April 1983

Item andDescription of Goods Val idity Date

Column 1 Column 2

Handicrafts to which Part (ii) of Schedule 2 applies being goodsto which a Tariff Classification specified in the Table hereunderapplies that -

(a) have been sent by a person outsideAustralia as an unsolicited gift toa person resident in Austral la;

(b) are not entered to be used for anycommercial purpose, including sale,lease, hire or exchange; and(c) are not in such a quart +ity that thatquantity represents a commercial quantity

Tariff ClassificationTHE TABLE

By -and

law ProvisionVal idity Date

Operative

42.03.3 451 BL 8160770 1 .82)50.09.9 471 BL 8160771 ( .82)51.04.9 481 BL 8160772 1 .82)55.08 491 BL 8160773 ( .82)55.09.4 501 BL 8160774 ( .82)56.07.9 541 BL 8160775 1 .82)60.03.1 561 BL 8160776 1 .82)60.04.1 571 BL 8160777 1 .82)60.04.21 581 BL 8160778 1 .82)60.04.29 591 BL 8160779 1 .82)60.04.31 601 BL 8160780 1 .82)60.04.39 611 BL 8160781 1 .82)60.04.4 621 BL 8160782 ( .82)60.04.9 631 BL 8160783 ( .82)60.05.12 641 BL 8160784 ( .82)60.05.13 651 BL 8160785 ( .82)60.05.14 661 BL 8160786 1 .82)60.05.15 671 BL 8160787 1 .82)60.05.19 681 BL 8160788 1 .82)60.05.6 691 BL 8160789 1 .82)61.01.3 701 BL 81607% 1 .82)61.01.461.01.5

711721

BLBL

8160791 1

8160792 1 .8822)61.01.9 731 BL 8160793 ( .82)61.02.3 741 BL 8160794 1 .82)61 . 02 . 4 751 BL 81 60 795 ( .82)61.02.5 761 BL 81607% 1 .82)61.02.6 771 BL 8160797 ( .82)61.02.9 781 BL 81607% 1 .82)61.03.2 791 BL 8160799 1 .82)61.03.3 801 BL 8160800 ( .82)61.03.9 811 BL 8160881 ( .82)61.04.1 821 BL 8160882 ( .82)61.04.2 831 BL 8160883 1 .82)61.04.31 841 BL 8160884 ( .82)61 .04.39 851 BL 8160885 1 .82)61.04.9 861 BL 8160886 ( .82)61.09.1 871 BL 8160887 ( .82)61.09.2 881 BL 8160888 ( .82)62.02.2 891 BL 8160889 ( .82)62.02.5 901 BL 81608% ( .82)62.02.6 911 BL 8160891 ( .82)64.01.91 921 BL 8160892 1 .82)64.01.9964.02.91

931941

BLBLBLBL

8160893 (8160894 ( .8822)

64.02.99 951 8160895 ( .82)64.03.91 961 81608% 1 .82)64.03.99 971 BL 8160897 ( .82)64.04.91 981 BL 81608% ( .82)64.04.99 991 BL 8160899 1 .82)(Det. date 31.12.81)

See21.2.83

Table

Live line tools and equipment of a kind used on overhead energised 19power(Op. 1.1.71

lines at- BL

voltages of7262040)

11 kV or more 24.1.83

Commonwealth of Australia GazetteNo. P 9. 22 April 1983 Consolidated By-law References (Part II) 79


Column 1


2Column

Parts for gas generators501

(engines) as follows: 19- A l l i s o n series or 507 as manufactured by Detroit Diesel 31.1.83Allison Div. of General Motors Corp., U.S.A.;- Avon 1533 series or Olympus 2020 series as manufactured by

Rolls -Royce Ltd. , Derby U.K.;- Kawasaki series SlA, SIT, S2A, MiA, MiT, TF as manufactured by

Kawasaki Heavy Industries of Japan; or- Solar gas generators

easmanufactured by Solar Turbines Inc.,

(Op.S21.982 - BL1827411U)U.S.A.

Parts of a kind in respect of which, if imported incorporated in or 19forming part of other goods, duty ascertained in accordance with 31.1.83Part II (other than section 17 or 17A) of the Customs

parts, subjectTariff would

not exceed 6itions: per cent of the value of such to the

cond(a) the parts were ordered with and are imported with the complete

goods for which they are a part; and(b) the Collector is satisfied:

(1) the parts aregoods;

are

standard initial service parts for thecomplete and

(Ii) the quantities reasonableNOTE:

This reference hasapply to

application only when the "General" ratethat would parts if they were imported incorporatedin or forming part of other goods does not exceed 6 %. Forexample, It applies (subject to conditions (a) and (b) above)to parts for goods that are dutiable at rates of 6% General/Free Preferential, but does NOT apply to parts for goods

Also todutiable at rates of 10% General /4 Preferential. benoted that the reference does NOT cover parts (or partstherefor) that attract a "General" rate higher than 6% as"specified" components or by virtue

thelower

of a Separate ArticlesDirection, etc., even though "remainder' of the completegoods may be dutiable at 6% or

(Op. 13.7.82 - BL 8253001 )

Parts for photocopying apparatus, as follows: 19Bal lasts 24. 1.83Brush rollersCleaning bags

motorsElectricFilter bagsFuser temperature controllersFusesHeatersLampsMagnets, flexible, ferritePotentiometersPressure rol I assembliesRelays, but not including reed relaysResistors, fixedRoller press assembliesSolenoidsSorter conversion kitsSwl tchesTransformersTransmission parts

(Op. 21.9.82 - BL 8254052)

Commonwealth of Australia Gaaette80 Consolidated By-law References (Part II) No. P 9, 22 April 1983

Item andDescription of Goods ' /alidity DateColumn 1 Column 2

Parts for usebut

in walking draglines to which 84.23.229 ago lles, undersecurity, not including the following and parts therefor exceptwhere otherwise indicated:

base f. we (tub) structurecentre journal (pin, pintle)swing rollers including inner and outer roller frames (caging)roller circle or path (upper and lower rails for rollers)swing rack (swing gear segments)main rotating frame Structure including cable troughshook shoes (lifting rooks for tub) waking shoe structuresincluding half trunnion tube and end tubes thereforWalking shoe can and can frame assemblies i nc I ud ing camshaft and

aluminium bronze bushes thereforwalking shoe can and slide assemblies including camshaft walking

shoe eccentric, can and swivel ball assembly including camshaftbut not excepting swivel ball gantry fairlead tower structure

including tri- structure mast, backlegs, fairlead structure, andsheaves and guide rollers for drag or hoist cables

"A" frames complete including high tensile steel linksfairlead or hoist cable sheavesmast support links (back leg emergency support ropes) boon point

(boon point sheave bracket Including sheaves but not exceptingbearings therefor)

swing gearboxes including pinions, vertical swing shaft and swingbrake assemblies but not excepting bearings and recordercouplings therefor

propel (walking) gearboxes and associated propel functiongee - trains including eccentric flanged bronze bushes and propelbrake assemblies but not excepting bearings therefor

hoist gear boxes and associated hoist function geartrainsincluding hoist brake assemblies drag gearboxes and associated

drag function geartrains including drag brake assemblieshoist drumsdrag drums machinery house structure including panels, glass, rear

doors and frames and opening mechanisms for doors but notexcepting control room, operators control desk and controls

hoist and drag ropesmain overhead and jib cranesboon hoist ropes guards, stairways, ladders, handrails, walkways

and platformsair conditioning equipment, filters and ducting thereforventilating fans and mountsinterior and exterior lighting and distribution boardsballastfire protection equipmenttrail ing power connection cablepainttoolsparts for

CustomsgeneralTariff use (see note 2.(1) to Division 15 of thefor definition)

grabs grapples,buckets dippers, shovels and similarattachments, and rigging thereforboom assemblymast assembly tubular steel, or wide flange H beams for boon or

mast manufacture, if further worked or assembled than the stageof cutting or profilingair compressorslubrication systems including hoses, pumps, compressors

(Op. 1.1.83 - BL 8255432)

Pipe fittings, rotating unions, having ball or roller bearings orcarbon bearing mechanical seals, of a kind used in the transferof fluids or vapour to and Fran rotating machinery via lead-in /lead-out tubing(Op. 1.1.71 - BL 7262089)

1924.1.83

1924.1.83

Commonwealth of Australia GazetteNo. P9, 22 April 1983 Consolidated By-law References l Parr !!i SI


2Column 1 Column

Vehicle components when imported in a physically separate state,including components imported in a

asphysically separate state forming

part of an unassembled vehicle, follows:(a) transmission equipment being equipment for transmitting power

from the driving unit to the driving wheels; or(b) parts for the above goods to which 87.06 applies,

for use i n :(a) the assembly or manufacture of vehicles having a gross vehicle

weight of 2.72t or more of a kind to which 87.02.1, 87.02.929,81.03.2. 87.03.3 or 87.03.9 appl ies; or

(b) the maintenance modification or repair of vehicles having agross87.01.31,

vehicle weight of 2.72t or more of a kind to which87.03.387.02.1, 87.02.91, 87.02.929, 87.03.2, or

87.03.9 applies,under security but not including the

attachedfollowing components or parts

therefor, whether or not imported to, or forming part of,the transmission equipment:

(a) axles;(b) clutch assemblies;(c) flywheels;(d) oil coolers;(e) operating linkages for gearboxes of a kind not mounted within

the gearbox or remote control tower;(f) power take-offs;(g) propeller shaft assemblies;(h) gearboxes (but NOT including transfer cases) for use In

vehicles having a gross vehicle weight of 9.67 t or more butless than 15.4 t

(Op. 1.1.83 - BL 8255250)

1924.1.83

82 Ad hoc Determinations :Vo P 9 22 April 1983Commonwealth of Australia Gazette

Customs Act 1901


The Minister of State for Industry and Commerce, Senator John B. Button, in pursuance of Section2738(2) of the Customs Act 1901,

hereto.notifies that determinations have been made under Part XVI of the

Act, as appended in the Table


(i) The tariff item ¡rider which the application was considered, except where a number of tariffitems apply, in which case VAR (various) is stated;

(Ii) The kind(s) of goods to which the determination applies and, where applicable, the conditionsspecified in the determination;

(iii) The date on or before which the goods shall be entered for home consumption, If such is acondition of the determination and where a bracketed number in this column is shown, itindicates the number of identical determinations issued;

(iv) The item, sub-item, paragraph or sub - paragraph, as the

as

case may

proposed

be, in Schedule 1, or theItem in Schedule 2, to the Customs Tariff Act 1966, to be altered, which shallapply to the goods. Where 4 or more figures are shown it refers to Scheule 1 and where a 2figure item is shown it Is an item of Schedule 2;

(v) The departmental file number (C).

All goods being machinery are, unless otherwise indicated, subject to the provisions of a direction(Separate Articles Direction) given under paragraph (b) of sub - section (1) of Section 25 of theCustoms Tariff Act 1966, as proposed to be altered.

Manufacturers who consider that they manufacture goods suitably equivalent to the goods described inthe Table may apply to the Department, quoting the relevant file number, for consideration ofrevocation of the determination.

Prospective importers of goods may lodge a by -law application on

This

the approved form, quoting therelevant file number, In respect of the desired concession. does not necessarily mean that allgoods covered by that description will obtain similar concessions. Prospective applicants mustestablish that suitably equivalent goods are not reasonably available from Australianmanufacturers.

Commonwealth of Australia GazetteNo. P 9. 22 April 1983

VAR Furniture components (NAFTA)



VAR Industrial robots with multiple axesand with continuous path softwarecapability. Continuous path beingdefined as the ability to programIinear and circular interpolation

32.12 "Sikadtr a-31' resin mastic

39.02 Polyethylene butyl pipe -linejoint wrap type, type 540

39.02 Polyethylene pressure sensitivejoint wrap type, type 930 -35

48.01 Thinprint lightweight printingpaper

73.14 1.83 mm galvanised staple wire

74.04 Aluminium bronze plate

82.04 Pattern modules for forming andimprinting designs on concretesurfaces

84.19 Automatic collating and stretchoverwrapping machines

84.19 Bottle labelling machine for gluebased labels

84.19 'Kirk -Rudy' high speed label Iingmachines for applying and fillinglabelled envelopes to

and

courier bags

84.21 Spark plug cleaning testing units

84.22 Parts for longwalI mining armouredface conveyors

84.23 Hydraulically operated rock breaker

84.25 Carbine harvester platforms asfollows: seventy five (75) only formodel 1075 harvesters, one hundredand eighty five (185) only formodel 7720 harvesters, one hundredand three (103) only for model 9820harvesters

84.30 Vacuum meat massage systems

84.30 Continuous batter mixers

84.30 "Baader" model 653 fish - washingmachine

84.46 Marble cutting machines designed toquarry marble as entered on lines 1

and 3 on22/10/82

Cairns Warrant No. 011 of

84.59 Anti -fall systems, being a rigidcarrier ladder safety device

84.59 Web guides, tilting roller84.61 Boller blowdown valves, 25 mm,

capable of being sequentiallyoperated7.4.2 of

in accordance with sectionAustral tan Standard 1271-

1973

Ad hoc Determinations

(iii) (iv) (v)

6/82

6/82

6/82

13

13

13

82/51232

82/51232

82/51232

12/82 19 82/5326 8

4/82 19 81/5 601 0

9/82 19 81/51232

8/82 19 81/57010

12/82 19 81/5 61 07

5/82 19 83/30017

5/82 19 82/51252

12/82 19 81/53840

6/81 19 80/56663

12/82 19 80/55443

12/82 19 81/59403

6/82 19 82/53661

6/83 19 82/50 81 6

8/82 19 82/54100

12/82 19 82/717,4

4/82 19 82/52282

8/82 19 81/60554

10/80 19 81/5 71 87

10/82 19 83/30046

6/82 19 81/53060

3/80 19 80/59011

7/82 19 81/61154

83

(il)

84 .4d hoc Determinations Commonwealth ojAustralia GacerteNo. P 9, :? .april /983

( i i)( i i i ) (iv) (v)

84.61 Thermostatic gas control valves as 12/82follows: model number V800, V810VS820, V852A, V854A, V850A, VR400,VR401 VR800 VR801, VR810 VR811,VR850, VR844, VR845, V81 -V41.

84.61 Single gauge isolator valves designed 12/82 19for hydraulic power systems85.01 Linear actuators type 84-TK-20 and 7/81 1984-TK -3085.01 One (1) Electric Motor, 375 kW, 1490 12/82 19R.P.M., 6.600 Volt, 50 Hz, 4 Pole85.02 Sintered Alnico magnets for 8/82 19for incorporation into cooking ovens85.11 Abar vacuum furnace, designed for heat 12/80 19treating and brazing of aircraft enginecomponents

85.11 Wire mesh welding machine, 6/82 19automatic, designed to produce 81/60463wire mesh not exceeding 2 m longx 1.2 m wide

85.11 Aber vacuum furnace, designed for 12/79 19heat treating and brazing of air- 79/60771craft engine components

19 80/60925

82/55652

81 7821

82/52540

79/5 8890

79/60771

85.11 Abar vacuum furnace, designed forheal- treating and brazing of air-craft engine components

85.12 Billiard table smoothing irons85.13 Single

carriercircuit power lineterminal equipment

85.14 TOAmonitorspreamplifier, Hi/Lo filter,

and L13í Kit86.10 Boom barriers for railway crossings,

consisting of polyglass and alumiglassboar arms incorporating pan

a swiveladaptedbracket fitted with andshear pin

87.03 Superstructure for 40t telescopicboon truck crane97.08 "Skydiver" amusement ride entered on 9/82

entry0n8ummbers A22460884 and

2/80 19 80/51103

8/82 19 82/5 671 46/82 19 82/51097

2/82

12/82

10/81

97.08 "Enterprise" amusementA22990313

ride enteredon entry number 10/82

19 80/57905

19 81 9308

19 82/52126

19 82/53082

19 82/51548

Commonwealth of Australia GazetteNo. PO. 22 April /983 Ad hoc Determinations 85

Customs Act 1901


The Minister of State for Industry and Commerce, Senator John N. Button, in pursuance of Section2738(2) of the Customs Act 1901, notifies that determinations have been made under Part XVI of theAct, as appended in the Table hereto.


(i) The tariff item inner which the application was considered, except where a number of tariffitems apply, in which case VAR (various) is stated;

Ili) The kind(s) of goods to which the determination applies and, where applicable, the conditionsspecified in the determination;

(tii) The date on or before which the goods shall be entered for home consumption if such is acondition of the determination and where a bracketed number in this column is shown, itindicates the number of identical determinations issued;

(lv) The item, sub-item, paragraph or sub - paragraph, as the case may be, in Schedule 3, or theitem in Schedule 4, to the Customs Tariff Act 1982, as proposed to be altered, which shallapply to the goods. Where 4 or more figures are shown it refers to Scheule 3 and where a 2figure item Is shown it is an item of Schedule 4;

(v) The departmental file number (C).

All goods being machinery are, unless otherwise indicated, subject to the provisions of a direction(Separate Articles Direction) given under paragraph Section 26 of the Customs Tariff Act 1982, asproposed to be altered.

Manufacturers who consider that they manufacture goods suitably equivalent to the goods described inthe Table may apply to the Department, quoting the relevant file number, for consideration ofrevocation of the determination.

Prospective Importers of goods may lodge a by-law application on the approved form, quoting therelevant file number, in respect of the desired concession. This does not necessarily mean that allgoods covered by that description will obtain similar concessions. Prospective applicants mustestablish that suitably equivalent goods are not reasonably available from Australianmanufacturers.

86 Ad hoc Determinations

VAR Industrial robots with multiple axesand with continuous path softwarecapability. Continuous path beingdefined as the ability to programlinear and circular interpolation

VAR 'abrics for use as linings in themanufacture of men's apparel, undersec ur ity

VAR Fabrics formanufacture

use as linings in theunderof mens apparel,security

VAR Fabric for use as linings in themanufacture of men's apparel, undersec ur i ty

VAR Fabrics for use as linings in themanufacture of men's apparel, undersecurity

07.05 Navy Beans or Canadian No.1 WhitePeabeans, to be further processedinto canned product by 31/5/83 undersecurity

07.05 Smalinto

I red beans to be further31 May

processedcanned product b 18

under security07.05 Twelve thousand (12,000) kg slenderette

bean seed

07.05 Navy Beans No.1 Grade Michigan PeaBeans to be further processed intocanned product by 31 May 1983, undersecurity

07.05 Great Northern Beans to be furtherprocessed into canned product by31/5/83, under security

24.02 Manufactured cut tobacco

29.13 Acetone

39.02 Double sided adhesive coated tapes,designed to hold rubber stereosand blocks in the printing industry

39.02 PVC foam, closed cell, planar form,rot adhesive coated

39.07 Solvent impregnated ink erasers, notbeing combined ink /pencil erasers

39.07 Power Transmission belts or belting,having moulded teeth or notches runningtransversely across the inner surface,but rot including batten belts crbelting

40.08 Extrusions, sponge rubber, 12.7 mm x9.766 mm, having a 4.064 mm diametercentre hole, to specification SAEJ18-SCE43 BDKZ

40.10 Transmission belts designed for usewith agricultural machinery

40.10 Belts, conveyor, of a kind designedfor use with sheet steel p Herserrs

40.11 Aircraft tyres 22 x 8 -8, 6 ply40.11 Aircraft tyres and tubes


(iii) (iv) (v)

6/83 19 82 /53268

6/83 Item 44 79/59833

5/83 Item 44 81/55388

5/83 Item 44 81/55388

6/83 Item 44 79/59833

3/83 19 82/55995

3/83 19 83/30008

3/83 19 53/30372

3/83 19 82/56899

3/83 19 83/30007

2/84 24.02.91 82/0175

3/83 19 79/56804

7/83 19 82/55616

6/83 19 82/56398

8/83 19 80/52765

7/83 19 82/56793

7/83 19 80/62747

7/83 19 82/54113

4/83 19 80/50793

7/83 19 82/55968

6/83 19 82/52484

t )

Commonwealth of Australia GazetteVo. P 9. 22 April 1983 Ad hoc Determinations 87

(i) (ii) (iii) (Iv) (v)

40.11 Aircraft tyres as follows: 6/83 19 82/5289240 x 14 24 PR Tubeless 225 mph rating2422

xx

7.7 16 PR Tubeless 210 mph rating7.75 -10 10 PR Tubeless 160 mph

rating40.11 Aircraft tyres and tubes 6/83 19 82/52079

40.14 Cords, 14 m length, 35with

mm dia, 6/83 19 80/62458designed for use wave recordingbuoys

48.15 Diagnostic reagent papers 6/83 19 81/5 51 74

48.21 Paper, plain or laminated with plastic 6/83 19 80/54274foil in rolls or folded in concertinafashion of a kind used in themanufacture of perforated patterncards used in the operation of Jacquardmachines, dabbles, colour selectorsor box motion on textiles machines

48.21 Jacquard cards, carboard, grey, 6/83 19 80/53936satin' zed, thickness max 1 mm, cutto size, unpunched

fabric containing56.07 Woven 65% polyester 7/83 19 80/63308and 35% cotton for use as Inter-lining in the manufacture of shirtcollars, under security

58.05 Woven webbing of polyester, cotton, 6/83 13 75/5 93 92

pol e eAjerand cotton and/or nylon

59.03 Enkafill polyvinyl alcohol in sheet 1/83 19 82/51057or roll form

59.17 Interlock woven felt sleeves and bands 6/83 19 80/60251of a kind used on sammying machinesin the tanning industry

59.17 Tubular needle felt 141F gaskets 7/83 19 80/5 81 54

62.05 " Casser" bannertowing

equipment as used in 6/83 19 82/51 94 8aerial

68.15 Mica paper in sheet or roll form (but 8/83 19 80/55577not including any articles madetherefrom) and not further impregnatedor bonded

68.16 Permeable element assemblies, designed 8/83 19 83/30078for the injection of inert gasesthrough thesteelmaking

bottomfurnaces

of basic oxygen

69.02 Refractories, ALCS -C qual ity, manu- 2/83 19 82/53901factured by Harima Japan300 x 202 x 75/51 mm300 x 202 x 75/63 mm

69.02 Silica refractory bricks type Q-RexRefractories

8/83 19 82/52941as manufactured by KyushuCo Ltd, Japan

69.02 Super duty silica refractory bricks 6/83 19 82/55220and shapes

28,69.02 Insulating firebricks, Borgestad 0.7, 8/83 19 82/54852

26 and having aofmaximum recommended

temperature rating 1400°C or higher70.20 Fibreglass need 1efe1t filter media 8/83 19 82/54877designed for the filtration of high

temperature gases

70.20 Fibreglass yarn, continuous filament, 4/83 19 80/52780to be coated with a polyvinyl chloridebased compound, under security

88 Ad hoc DeterminationsCommonwealth of Australia Gazette

Vo. P 9, 22 April 1983

(v)

73.15 Molybdenum steel wire 6/83 19 77/62628

73.18 Cold drawn seamless tube, 265.43 rnm 7/83 19 82/5502700 x 11.557 mm WI

73.18 Steel pipe to specification API 5LX-42 6/83 19 82/52840in the following sizes:323.9 mn CO x 17.47 mn WI;237.1 mn OD x 15.09 mm WI; or219.1 mn OD x 12.7 mn WI

73.32 Hydraulic "nut5" of a,typea drama ising 4/83 19 81/60021a nut body, a thrus ring an ahydraulic chamber

73.35 Hot coil compression springs 4/83 19 81 /59339

73.40 Parts for core barrels as used on 7/83 19 82/54640drilling rigs73.40 Tube quick connectors 4/83 19 79/58166

74.03 Extruded brass hollow sections 7/83 19 80/59858

74.07 Copper /nickel 90/10 alloy tube diameter 3/83 19 79/61257exceeding 90 mm; wall thicknessexceeding 3.25 mm

76.06 Al smite treated aluminium tube 7/83 19 81/575%83.01 Components for use in the manufacture 6/83 19 80/60703of captive key interlocks83.02 Automatic flush bolts 6/83 19 81/58956

84.10 Netzsch punp, tyreat602 -60 for the 6/84 19 82/56020

pumping of sludge a tin mill84.18 Refrigeration purgers, fully automatic 6/83 19 82/51358

84.18 Engine oil filters, Volvo part 6/83 19 82/54456No. 466634.3

84.18 Filter cartridges, having a basis of 6/83 19 82/51136activated carbon designed to be usedin the food service industry for thesecondary filtration of water to removetaste and odour

94.18 "Baldwin" 895 or B99 oil filters 6/83 19 79/5944584.18 Tee and inllne type highfilters, pressure 6/83 19 82/52154

hydraulic fluid FRK and FRHseries, designed for use on hydrotorengine starter systems

94.18 Degassing and filtering units, "Fild" 7/83 19 32/56180for molten aluminium84.18 Filter cartridges, having a basis 6/83 19 82/52098of activated carbon, designed to be

used in the food service industry forthe secondary filtration of water toremove taste and odour

84.18 Acid purification units, Ecotec brand 6/83 19 82/52833for removal of aluminium from 15 -20per cent sulphuric acid in theanodising industry

84.18 Centrifugal hydro extractors, designed 6/83 19 82/54057for use ln the laundry and textileindustries for removal of liquidsafter the washing or dyeing process

84.19 Parallel packing systemsparallel 'Organpak' , 7/83 19 81 /54787

designed for the packing offerrous nails, screws, bolts andthe like

(ii) (iiI) (iv)


84.19 'Rovema' form, f i I I and sealingmachines but not including electronicweighing units, whether importedseparately or otherwise

84.19 "FMC" Model 21G granular fillers,incorporating a telescopic praneasur-ing top, designed for fiIling weightsof 154 grams for 301 mm x 207 rim cansor 340 grams for 340 mm x 407 mn cansat speeds of 120 to 300 cans perminute

84.19 Shrinkwrapping machinery complete withtunnel, automatic, designed to collateand shrinkwrap cans, bottles, jarsor multi packs of same, either with orwithout a tray or die -cut pad ineither cIa, f i lm or printed film.>ÿ ;, Bred to the pack at speeds

ranging from 40 collations to 300collations of packs per minute, butnot including machines which shrinkor stretch wrap palletised packs ofsuch goods

84.19 Packers designed to package cans incorrugated paper at a rate of 60cases per minute or greater

84.19 Applicators straw, designed to applystraws to the outside of beveragecontainers

84.19 'Rovema' form /fill /seal machines,designed for handl ing food productsat more than 100 bags or cartonsper minute, but not includingelectronic weighing units

84.21 Fogging or spraying machines thatproduce a fog or spray with aparticle size not exceeding 60microns

One (1)84.22 only prototype escalator,under security, for prototypepurposes

84.22 Coresetters designed for the auto-matzo insertion of cores in moulds

84.22 Parts for IongwaI I mining armouredface conveyors

84.22 Transporters, pneumatically operatedair flotation, designed for themovement of sheet glass into and outof an autoclave

84.22 "Scotty Down. ^" fl ch i ng dragsystems

84.22 Pneumatic lifting bags84.22 Pneumatic lifting bags

84.23 Hydraulic and pneumatic drillingmachines, crawler mounted, butNOT including, when importedseparately, extension drill steelequipment as foilows: extension rods,shank rods

84.24 Marden planters, designed for theplanting of seedlings in all typesof ground without prior preparation

84.25 Powell Generation III tobacco combineharvester

Ad hoc Determinations

(iii) (iv) (v)

7/83 19 82/54116

7/83 19 81/5 961 5

6/83 19 82/54995

7/83 19 82/54605

7/83 19 81/51067

6/83 19 81/57395

7/83 19 82/55745

3/83 19 82/55 91 4

6/83 19 82/55951

6/83 19 82/50816

6/83 19 82/51178

6/83 1 9 83/30559

6/83 19 81/5 321 6

6/83 19 81/55170

6/83 19 81/59739

7/83 19 82/54368

6/83 19 82/54558

89

Commonwealth of Australia Ga:ette90 .-Id hoc Determinations ¡Vo. P 9. 22 April 1983

(iii (Iii) (iv) (v)

84.25 Elbicon Mal- 2000 electronic detection 6/83 19 82/55017systems, designed for the removal of

bodies from fresh pickedvegetables

84.25 Rasp bars, carbine harvester 7/83 19 82/5590584.26 Automatic cheese portion cutter and

loader6/83 19 82/56124

84.28 Royer shredder mixers, Models 110 and 6/83(4) 19 81 /58947112

84.28 Screw40 with

presses "Simon-output

Rçsedown " Mini 6/83 19 82/50679an capacity of 40 kgs

per hour or Mini 200 with an outputcapacity of 200 kgs per hour, designedfor producing oil or cattle feed fromsunflower or other seeds

confectionery84.30 Chocholate moulding 7/83 19 82/54192plant81.33

65/15Ja en/75berg0 " paper winder, model 7/83 19 82/54479

84.40 "MCS Slurp Jet" dyeing machines 7/83 19 79/5005984.43 Mould, 700 mm long, for continuous 6/83 19 82/54653slab casting machine84.47 Pailetizers, plastic strand having

400 mm6/83 19 72/54724a throat size of 100 ran to

with akg/hr

capacity of 150 kg /hr to3800

84.53NC ttape reá ration system, "Fanuc" 5/83 19 82 /55498

84.53 tC tape preparation system "Fanuc" 3/83 19 82/54324system P -Model D

84.53 NC tape preparation system, "Fanuc" 6/83 19 82/56719system P -Model G

84.53 NC tape preparation system, "Fanuc" 6/83 19 82/56720system P -Model F

84.54 Combination baler shredders used for 6/83 19 82/55052thebeing

shredding of paper documentscapable of shredding and baling

in one operation84.59 8agmaking

Intermat HTand printing line, Lamo 7/83 19 82/55560

84.59 Chalking machines designed for the 7/83 19 82/53813the applicationon cables

of fluidisedchalk

84.59 Coating machine, automatic, designed 7/83 19 82/56556to coat each end of

PVDCcylindrical wine

corks with a type emulsion84.59 Cold

system,bottle inspection and ejection 7/83 19 81/55838Ines CBE"

84.59 Deaerators, designedproducts

to deaerate bags 7/83 19 82/55452of powdered

84.59 Blown film extrusion lines with internal 7/83 19 80/61487bubble cooling but not including wind -upand take off equipment having a webwidth less than 2.25 m

84.59 Insertion machines, designed to insert 7/83 19 82/53483actuator buttons onto aerosol cans84.59 Cleaners, designed to clean and 7/83 19 82/54552degrease printed circuit boards

P

Commonwealth of Australia GazetteNo. P 9, 22 April 1983

84.59 Industrial robots with multiple axesand with continuous path softwarecapability. Continuous path beingdefined as the ability to programlinear and circular interpolation

84.59 Sanitation systems, marine, MansfieldTDX, designed to macerate and chemicallytreat sewage

84.61 Ball valves two -way high pressure ink esu8fm ngMHa awori ngpresreo0 or more

84.61 Ball check valves, tank venting,designed for use in the constructionof marine vessels exceeding 100tonnes

84.61 Element and poppet assemblies, con-misting of brass pressing fixedto a sealed copper cup containingan expanding wax element, designedfor use In the manufacture ofautomotive engine thermostats

84.61 Dial - a-flow fluid flow controlsterile, disposable valves, designedfor use in intravenous therapy inhospitals and clinics

84.61 Single gaugefor

isolator valvesdesigned hydraulic power systems

84.61 Valve assemblies for ((nitro) 110,400 and

51840;

Dill series gas water heaterthermostats consisting of valveassembly part numbers 18947, 19897and interrupter valveassembly part number 25659 andç bnet housing assembly part number

84.61 Pig ball receiver and injector valves84.61 Aerosol valves for bottles or metal

ofcontainers with neck finishes20 mm or less

84.61 Thermostatic gas valves Honeywellmodel Nos. V5T55A and V51558 designedfor use on room heaters wall

water boilersfurnaces,

duct heaters and hot

84.61 'Thinking Cap' thermostaticallyresponsive ventilating unitsunassembled

84.61 Detergent293

spray foam units modelconsisting of, (a) main centre

unit; (b) valve control for foam;(c) wand hand piece extension

84.61 Pilot assisted overcentre valveswith working pressures

34.47 MPaup to a

maximum of

84.61 Electro hydraulic control valvesPart Nb. 26632CM 92 for self -propelled combine harvester

84.61 PilotA000 type

operated safety reliefFA, 930810

valves930608 FA,

931012 FA 931216 FA andnumbers

vacuum961210valves ACC0 type FA

and 961212 FA

84.61 Module systems forLV6,hydraulic valves

Rexroth part Nos. LV10 and LV16

84.61 One (1) only Raco goggle valve, singledisc type sl ide plate

.4d hoc Determinations 91

(iii) (iv) (v)

5/83 19 82/56562

7/83 19 82/56669

6/83 19 82/54380

6/83 19 82/54139

6/83 19 82/54655

6/83 19 82/54387

6/83 19 82/55652

6/83 19 82/50693

8/83 19 82/54001

6/83 19 82/50446

6/83 19 81 /61 253

7/83 19 82/52257

7/83 19 79/59223

7/83 19 80/58546

7/83 19 80/61458

6/83 19 82/54940

6/93 19 81/54430

6/83 19 82/51333

92 Ad hoc Determinations

84.63 Propel transmissions for PdH electric100J3944mining

andshovels, part numbers -1

100J3668 -1

85.01 Dual purpose welding generators

85.01 DC27

flatvolt motors 12 volt, 24 volt and

85.01 60 MVAR 362 kV three phase shunt reactor

85.01 tr8.7orp"to.io5Pu155gTeo5vwith electric

85.05 Tensioning and strapping machines, handheld

85.06 Satake eddy pocket mixer CC operated

85.08 Used yokes andgenerators

pole piecesstarter

being partsmotorsfor and

85.10 Underwater lamps designed for use atdepths exceeding 50 m

85.10 Underwater lamps designed for useat depths exceeding 50 m

85.10 Underwater lamps designed for use atdepths exceeding 50 m

85.10 Underwater lamps designed for

for

use atdepths exceeding 50 m

85.10 Underwater lamps designed useat depths exceeding 50 m

85.11 MIG orbital pipe welding equipment85.11 One (1) only semi-

aluminiumcontinuous vacuumfurnance for brazing

85.12 Domestic hair- setting appliancesconsisting of heater unit, heatrollers and roller clips

85.12 Fan heaters (NAFTA)85.13 Codex Intelligent matrix switches85.13 Data in voice modems85.13 IXO Telecanputing System" computer

access device incorporating keyboardand Inbuilt modem

85.13 Codex intelligent matrix switches

85.13 Computer terminal voice responseun its

85.15 Salvor 3 and Salvor 4 main /reserve MFmarine tr an cm i tters

85.15 Splitter Inserter TC 1470 for closedcircuit video equipment

85.19 Microprocessor unit Accos 2S85.19 Coaxial cab e connectors suitable for

use28

with heifax cables of diametersnn or greater

85.19 Programmablerotary cam limit switches, multiple

operated85.19 Voltage divider, Dekav ider85.19 Programmable controllers

Commonwealth of Australia GazetteNo. P 9, 22 April ; 983

(Iii) (iv) (v)

6/93 19 82/52951

6/83 19 82/56233

6/83 19 81/56681

7/83 19 82/54684

6/83 19 82/54180

6/83 19 82/5 55 76

7/83 19 82/55792

6/83(2) 19 80/61 46 9

6/83 19 82/54340

6/83 19 82/55963

6/83 19 82/50320

6/83 19 82/50319

6/83 19 81/60845

6/83 19 82/56233

6/83 19 82/53222

6/83 19 82/5 62 31

12/83 13 83/30555

6/83 19 82/56305

6/83 19 80/53293

7/83 19 82/55740

6/83 19 82/56305

6/83 19 82/52603

8/83 19 82/53423

8/83 19 82/5 61 62

6/83 19 82/5 21 22

7/93 19 81/55858

6/83 19 82/56351

6/83 19 82/5 60 66

6/83 19 82/54 71 5

(ii)


85.19 Connector blocks designedelectric

for usewith submersible motors

85.19 Remote electronic load limitswitches type ELS /50

85.19 Solid state switching units asfollows: epoxy encapsulated withintegrated silicon control led function,120/240V AC, 5A or 1OA SPST normallyopen ; epoxy encapsulated with Integrated

(L,Icon¿A S-

.controlmal ly function, 6 to öHe

85.19 Contactors and parts for contactors(NAFTA)

85.19 Rotary switches and parts for rotaryswitches (NAFTA)

85.19 Motor starters and(NAFTA)

parts for motorstarters

85.19 High

ndparts

highrupturing capacitycapacity

85.22 Signal converter85.22 TV test signal generators87.02 Suzuki all terrain motor vehicles87.02 Suzuki all terrain motor vehicles87.03 Deflectograph measuring apparatus

mounted onfor

road

specially designed trucks,the deformationdesigned measuring

of pavement

87.03 Crane carriers for P d H models9125TC or 917010 lattice boon truckscranes

87.05.21 0 Motor vehiclesecurity

bodies, underunder

87.06.31 0 Motor vehicle components

87.06 End yoke of "U -Bolt" or "Cap Bolt"construction for propellor shaftsof 1400 series and

bearings toupwards, but not

including which 84.62applies when imported In a physicallyseparate state

87.06 Parts for propellor shafts of 1800series and upwards, but not including:(a) universal joints of the 1800series; or (b) bearings to which84.62 applies; when imported In aphysically separate state.

87.06 End yokes of "U- bolt" or "Cap -bolt"construction for propellor shaftsof 1400 series and upwards, but notincluding bearings to which 84.62applies when imported in a physicallyseparate state

87.07 Pedestrian operated , electric,ecplos ion/ flameproo pallet trucks,1500 kg and

In

2000 kg capacities, foroperation Class 1, Zone 1,hazardous flameproof areas

87.11 "Levo" stand -up wheel chairs92.13 Tape head cleaning kit, cal 44 -22297.07 Barb less tuna lures suitable for

pole tuna fishing

Consolidated By Ad hoc Determinations

(ili) (iv) ( v )

6/83 19 82/56722

6/83 19 81/61101

6/83 19 81 /60090

6/83 13 78/61695

6/93 13 78/61695

6/83 13 78/61695

6/83 13 78/61695

6/83 19 82/52270

6/83 19 82/56128

5/83 19 82/55961

5/83 19 82/55898

6/83 19 80/51551

6/83 19 82/50076

12/83 87.05.210 81/54950Sch 3

12/83 87.06.310 81.54950Sch 3

8/83 19 81 /57344

8/83 19 81/57343

3/83 19 82/55839

6/83 19 82/56583

5/83(3) 19 82/50517

8/83(2)

8/83

19 80/61342

19 81/52831

93

94 Ad hoc DeterminationsCommonwealth of Australia Gazette

No. P 9, 22 April 1983

(ii) (iii) (iv) (v)

98.03 Components for ball point pens but 7/83 19 81/60148not including springs, refills andparts therfore whether importedseparately or otherwise, for usein the manufacture of bal I pointpens of a kind which are normal I ysold on the retail market at a pricein excess of SA2.50 each, provided thatno two or more components for any pen areimported fitted together or forming partof other goods

98.03 Components for ball point pens but not 7/83 19 82/54918including springs, refills and partstherefore whether imported spearatelyor otherwise, for use In the manufactureof ball point pens of a kind which arenormally sold on the retail marketat a price in excess of SA2.50 each,provided that no two or more componentsfor any pen are imported fitted togetheror forming part of other goods

Determination Numbers: 336668- 336730, 336756 - 336757, 336759 - 336783, 336793- 336807, 336814, 336815-336848, 336854- 336875.

(i)

Commonwealth of Australia GazetteNo. P 9, 22 April 1983 Ad hoc Determinations 95

Customs Act 1901

Notice of Determinations Under Part XVI

The Minister of State for Industry and Commerce, Senator John N. Button, in pursuance of Section


Act, revoking earlier Determinations referred fo in the Table appended hereto.

The Table specifies :-

(i) The Tariff item under which the application was considered, except where unlimited tariff

items apply, in which case V. (Various) is stated;

(iil The kind(s) of goods to which the Determination applies and, where applicable, the

conditions specified in the Determination;

(lii) The number of the Determination being revoked;

(iv) The file number (C).

Commonwealth of Australiaustralia Gazette96 Ad hoc Determinations No. P 9, 22 April 1983

(i) (ii) (iii) (Iv)

40.02 Pilot assisted overcentre valves with working 335426 80 -58546pressures

Conveyor

up to a maximum of 34.47 kPa40.10 belts 0336267 80 -50793

73.15 Molybdenum steel wire 336387 77 -62628

73.18 Cold drawn seamless tube, 265.43 mm OD x 336249 82 -5502711.303 inn WI

73.40 Choker and triangular dees 335847 81 -58606

84.14 Wasterating of

wood fuel furnace having a maximum 334896 82 -5297420 mll lion BTU /hr

84.20 Computerised weighing machines 334826 82 -52497334 82 7334828334829

84.22 Parts for longwall mining conveyors 336517 82 -50816

84.23 Extendable backhoe dipperstick attachments, 335481 81 -60861but not including buckets84.23 Extendable backhoe dipperstick attachments, 335625 80 -50360but not including buckets84.48 Cambio Debarkar fool

70 -54,holders for models 336028 80 -58717

70 -35, 71 -45, 70 -66, 71-75

84.54 NC tape punching machine, "Fanuc" system 335251 82 -54324P -Model D

84.54 PNC tape punching machine, "Fanuc" system 335880 82 -55498

84.61 Minimess screw couplings and fittings 324628 80 -62181classified to item 84.61 of the CustomsTariff for high pressure testing ofhydraulic systems for direct use withmanometers pressure gauges and pressuretesting equipment

85.11 Abar vacuum furnace, designed for heat 336520 79 -60771treating and brazing of aircraft enginecanponents

85.13 Codex intelligent matrix switches being 336802 82 -56305a patch panel where all connections aremade and broken electronically

85.19 Fault make load break isolator switches 335117 81 -53132current rating 100A to 400A inclusive,designed for use in ambient conditionsof up to 100 per cent humidity attemperatures exceeding 40`"C

97.05 Corkscrew/ loop roller coaster components 332257 81 -60125consisting of hells section of steeltrack approximately 300 ft long, sevensets of brake and one

336501,336793,

seven coach trainDetermination Numbers: 336495, 336506, 336509,

336837,336528, 336558,

336873,336600, 336670,

336879,336719,336886.336759, 336814, 336859, 336876,

Printed by C. J. THOMPSON. Commonwealth Government Printer, Canberra

commonwealth gazette of australia - legislation

Documents