commissioningreport show ground 20131121

*******************************************************************************************************************************Commissioning report Nov 21, 2013*******************************************************************************************************************************

*******************************************************************************************************************************Report identification*******************************************************************************************************************************

Date: 2013.11.21 Author: john Commissioning type: Manual Commissioned elements: BTS, TRS BTS state:

*******************************************************************************************************************************TRS commissioning parameters*******************************************************************************************************************************

***************************************************************************************************************************** Site Properties *****************************************************************************************************************************

Name: SHOW GROUND Location: KISUMU Description: 1+1+1 BTS ID: 3076 A2EA: - IP addresses TRS: 10.163.18.169 / 30 BTS: 10.163.18.170 RNC: 10.65.216.33 NTP server 1: 10.65.216.36 External equipment IP addresses via DHCP RET1: - BBU: - LMU: - Range: -

***************************************************************************************************************************** Security *****************************************************************************************************************************

Authentication LDAP server Address: 10.30.7.110 Port 389 Allow only secure connection: Yes Automatic certificate management CMP/CA server: - Port -

Certificate repository: - Port - TLS for OAM interface Mode: Off BTS firewall Enable ping and traceroute: Yes FTP server on transport module Enable server: Yes

***************************************************************************************************************************** Physical Layer Configuration *****************************************************************************************************************************

FTIB Unit properties Transport mode: Iub IP

PDH interfaces type: E1 Interface In use CRC IF 1 Yes Yes IF 2 No Yes IF 3 No Yes IF 4 No Yes

Interface type: Ethernet Interface In use Speed and duplex Max. capacity (Mbit/s) EIF 1 No Autodetect 1000 EIF 2 Yes 100 Mbit/s full duplex 1000 EIF 3 No Autodetect 1000

***************************************************************************************************************************** Ethernet Switching *****************************************************************************************************************************

QoS aware Ethernet switching in use: No Queue weights Queue Weight 1 Strict 2 8 3 1 4 1 QoS classification Mode: DSCP Priority queue for non-IP frames: 1 DSCP to priority queue mapping DSCP[0...63] Queue 46,48 1

26,28,30,34,36,38 2 10,12,14,18,20,22 3 VLAN aware configuration VLAN aware switching in use: No Default priority for internal switch interface: 0 Default VLAN ID for internal switch interface: 1

Ethernet interfaces VLAN aware settings: EIF Accepted frame types Default priority Default VLAN ID [1...4094] VLAN ID list [1...4094] 1 All 0 1 - 2 All 0 1 - 3 All 0 1 -

Ethernet Interfaces shaper EIF Egress shaper rate (Mbit/s) Ingress rate limiting (Mbit/s) Speed and duplex Flush MAC addresses on LOS 1 Speed and duplex Speed and duplex Autodetect No 2 Speed and duplex Speed and duplex 100 Mbit/s full duplex No 3 Speed and duplex Speed and duplex Autodetect No

***************************************************************************************************************************** Ethernet Link OAM *****************************************************************************************************************************

Link OAM settings Remote loopback discovery in use: No EIF 1 Link OAM in use: No EIF 2 Link OAM in use: No EIF 3 Link OAM in use: No Link OAM Profiles

***************************************************************************************************************************** Ethernet Service OAM *****************************************************************************************************************************

Settings Committed information rate (CIR): 1.0 Mbit/ s Optional TLV inserted: No

***************************************************************************************************************************** Quality of Service *****************************************************************************************************************************

Quality of Service Queue weights Per Hop Behavior Queue weight Expedited Forwarding Strict Assured Forwarding 4 10000 Assured Forwarding 3 1000 Assured Forwarding 2 100 Assured Forwarding 1 10 Best Effort 1

Traffic type settings Traffic type Per Hop Behavior VLAN priority DSCP SG1 Expedited Forwarding 6 46 SG2 Assured Forwarding 4 5 34 SG3 Assured Forwarding 3 4 26 SG4 Assured Forwarding 2 3 18 SG5 Assured Forwarding 1 1 10 SG6 Best Effort 0 0 DCN Assured Forwarding 1 1 10 NBAP Assured Forwarding 4 5 34 OSPF Expedited Forwarding 6 48 BFD1 Assured Forwarding 4 5 34 BFD2 Assured Forwarding 4 5 34 BFD3 Assured Forwarding 4 5 34 BFD4 Assured Forwarding 4 5 34 BFD5 Assured Forwarding 4 5 34 BFD6 Assured Forwarding 4 5 34 BFD7 Assured Forwarding 4 5 34 BFD8 Assured Forwarding 4 5 34 BFD9 Assured Forwarding 4 5 34 BFD10 Assured Forwarding 4 5 34 BFD11 Assured Forwarding 4 5 34 BFD12 Assured Forwarding 4 5 34 BFD13 Assured Forwarding 4 5 34 BFD14 Assured Forwarding 4 5 34 BFD15 Assured Forwarding 4 5 34 BFD16 Assured Forwarding 4 5 34 ICMP Assured Forwarding 4 5 34 TOP Expedited Forwarding 6 46 CES1 Expedited Forwarding 6 46 CES2 Expedited Forwarding 6 CES3 Expedited Forwarding 6 CES4 Expedited Forwarding 6

***************************************************************************************************************************** IP Interfaces *****************************************************************************************************************************

Settings MTU: 1500 octets

Transport Ethernet interface Address: - Bandwidth: 1000.0 Mbit/ s Traffic shaping type: WFQ Total shaper information rate: 1000.0 Mbit/ s Total shaper burst size: 1522 octets Shaper information rate: 1000.0 Mbit/ s Shaper burst size: 1522 octets Committed information rate: 0.0 Mbit/ s QoS enabled: Yes Ethernet overhead included: No OSPFv2 parameters Interface area: OSPF disabled Configured interface cost: 0 Hello interval: 1 LSA retransmission interval: 5 Router dead interval: 4 Packet transmission delay: 1 MTU mismatch detection in use Yes OSPF with BFD No

VLAN Configurations VLAN ID: 1849 Address: 10.163.17.85 / 30 CES over PSN dedicated VLAN: No Shaper information rate: 1000.0 Mbit/ s Shaper burst size: 1522 octets Committed information rate: 30.0 Mbit/ s QoS enabled: Yes OSPFv2 parameters Interface area: OSPF disabled Configured interface cost: 0 Hello interval: 1 LSA retransmission interval: 5 Router dead interval: 4 Packet transmission delay: 1 MTU mismatch detection in use Yes OSPF with BFD No

BFD sessions

OSPFv2 OSPF in use: No Area ID: - Stub flag: No Router ID: - Routing preference: 110 Reference bandwidth for OSPF cost value 1: 10000 Mbit/s Shortest path first recalculation delay: 200 ms Shortest path first hold time: 5000 ms Maximum shortest path first hold time: 80000 ms

******************************************************************************

*********************************************** CES over PSN *****************************************************************************************************************************

CES over PSN settings: Minimum UDP port: 53248 Required bandwidth: 0.00 Mbit/s Available bandwidth: 970.00 Mbit/s

***************************************************************************************************************************** Iub IP *****************************************************************************************************************************

Far end SCTP subnet: 10.65.196.0 / 26 Minimum SCTP port: 49358 Minimum UDP port: 49359 CAC committed bit rate: 30.0 Mbit/s Signaling bit rate: 1000 kbit/s DCN bit rate: 300 kbit/s Frame protocol multiplexing Local UDP port: 65535 Remote UDP port: 65535 Multiplexing delay: 2 ms Multiplexing amount: 30 packets

***************************************************************************************************************************** Timing over Packet *****************************************************************************************************************************

Timing over Packet in use: No

***************************************************************************************************************************** Application Addresses *****************************************************************************************************************************

User plane 1: 10.163.17.85 VLAN interface 1849 Control plane: 10.163.17.85 VLAN interface 1849 Management plane: 10.163.18.169 BTS subnet interface

***************************************************************************************************************************** RTT Measurement *****************************************************************************************************************************

Reflector In use: Yes Reflector port: 5000 TWAMP sessions

Source port: 49151 Message rate: 10 messages/s TWAMP session 1 In use: No Source IP address: - Destination IP address: - Destination port: 5000 DSCP: 34 Message size: 100 octets 15 min packet loss ratio fault threshold: 100% 1 min round trip time fault threshold: 1000000µs TWAMP session 2 In use: No Source IP address: - Destination IP address: - Destination port: 5000 DSCP: 34 Message size: 100 octets 15 min packet loss ratio fault threshold: 100% 1 min round trip time fault threshold: 1000000µs TWAMP session 3 In use: No Source IP address: - Destination IP address: - Destination port: 5000 DSCP: 34 Message size: 100 octets 15 min packet loss ratio fault threshold: 100% 1 min round trip time fault threshold: 1000000µs TWAMP session 4 In use: No Source IP address: - Destination IP address: - Destination port: 5000 DSCP: 34 Message size: 100 octets 15 min packet loss ratio fault threshold: 100% 1 min round trip time fault threshold: 1000000µs TWAMP session 5 In use: No Source IP address: - Destination IP address: - Destination port: 5000 DSCP: 34 Message size: 100 octets 15 min packet loss ratio fault threshold: 100% 1 min round trip time fault threshold: 1000000µs TWAMP session 6 In use: No Source IP address: - Destination IP address: - Destination port: 5000 DSCP: 34 Message size: 100 octets

15 min packet loss ratio fault threshold: 100% 1 min round trip time fault threshold: 1000000µs TWAMP session 7 In use: No Source IP address: - Destination IP address: - Destination port: 5000 DSCP: 34 Message size: 100 octets 15 min packet loss ratio fault threshold: 100% 1 min round trip time fault threshold: 1000000µs TWAMP session 8 In use: No Source IP address: - Destination IP address: - Destination port: 5000 DSCP: 34 Message size: 100 octets 15 min packet loss ratio fault threshold: 100% 1 min round trip time fault threshold: 1000000µs TWAMP session 9 In use: No Source IP address: - Destination IP address: - Destination port: 5000 DSCP: 34 Message size: 100 octets 15 min packet loss ratio fault threshold: 100% 1 min round trip time fault threshold: 1000000µs TWAMP session 10 In use: No Source IP address: - Destination IP address: - Destination port: 5000 DSCP: 34 Message size: 100 octets 15 min packet loss ratio fault threshold: 100% 1 min round trip time fault threshold: 1000000µs

***************************************************************************************************************************** Synchronization *****************************************************************************************************************************

Timing sources

Priority Interface 1 IF 1 E1

***************************************************************************************************************************** BTS routing ******************************************************************************

***********************************************

Static routes Destination Netmask Bits Gateway Preference BFD session 0.0.0.0 0.0.0.0 0 10.163.17.86 1 - Route reinstallation delay: 0 s

Forwarding table Destination Netmask Bits Gateway 10.163.18.168 255.255.255.252 30 BTS subnet 10.163.17.84 255.255.255.252 30 VLAN interface 1849 Default gateway - - 10.163.17.86

***************************************************************************************************************************** IP Filtering *****************************************************************************************************************************

Exception rules Rule name Far endpoint

*******************************************************************************************************************************BTS commissioning parameters*******************************************************************************************************************************

File version ID: WN7.0_2.0

***************************************************************************************************************************** BTS settings *****************************************************************************************************************************

BTS name: SHOW GROUND BTS configuration name: FM BTS ID: 3076 Time zone: (GMT+3) Africa/Nairobi External 2.048 MHz synchronization output in use in HO mode: No Forward synchronization in co-siting: No Activate security for Ethernet ports: No External 2.048 MHz Synchronization in use: No Transmission synchronization (TDM/SyncE/ToP) in use: Yes

GPS in use: No Maximum association retransmissions: 5 Maximum path retransmissions: 5 Enter BTS to test state: No

*************************************************************************************************************************** Module locations ***************************************************************************************************************************

FSME 1: KISUMU

*************************************************************************************************************************** Passive units ***************************************************************************************************************************

***************************************************************************************************************************** Automatic license distribution settings *****************************************************************************************************************************

Enable SW monitoring: No Automatic licensing in use: Yes R99 Channel Element licenses: -1

***************************************************************************************************************************** Local cell resources *****************************************************************************************************************************

Single cell solution in use: No Extended BTS site capacity enabled: No

*************************************************************************************************************************** Local cell 30760 ***************************************************************************************************************************

FRGF 1.1.1 ANT 1 TX/RX usage: TXRX MIMO type: SingleTX Virtual antenna mapping in use: No Carrier power: 60W License: Requires Flexi WCDMA BTS 60W Power license, Flexi WCDMA BTS Branch Activation license

*************************************************************************************************************************** Modules not defined ***************************************************************************************************************************

***************************************************************************************************************************** Local cell settings *****************************************************************************************************************************

RNC type: NSN Intelligent shutdown in use: No

*************************************************************************************************************************** Local cell 30760 ***************************************************************************************************************************

Cell range: -1 RACH capacity: Expiration time: Gradual shutdown procedure in use: Yes Shutdown steps: 10 Shutdown window: 15 Shutdown timeout:

***************************************************************************************************************************** WCDMA carrier candidates and local cell groups settings *****************************************************************************************************************************

*************************************************************************************************************************** Local cell group Group 1 ***************************************************************************************************************************

************************************************************************************************************************* Local cell 30760 *************************************************************************************************************************

Default carrier: 10587 Allowed carrier: 10587 HSPA mapping: PIC pool: License: Requires HSUPA Interference Cancellation Receiver license.

**************************************************************************

*********************************************** Baseband (BB) allocation *************************************************************************************************************************

Minimum licensed BB capacity: 0% Maximum HW BB capacity: 100%

************************************************************************************************************************* HSPA license allocation *************************************************************************************************************************

Licensed HSDPA users: HSUPA licenses:

***************************************************************************************************************************** HSDPA settings *****************************************************************************************************************************

HSDPA resource allocation: BTS

*************************************************************************************************************************** HSDPA Iub delay threshold values ***************************************************************************************************************************

Minimum: 50 Middle: 150 Maximum: 250

*************************************************************************************************************************** Fault Management for HSDPA Licenses ***************************************************************************************************************************

HSDPA 16 QAM support license in use: Yes HSDPA proportional fair resource packet (PFRP) scheduler license in use: Yes HSDPA shared scheduler for BTS license in use: Yes

*************************************************************************************************************************** HSDPA capacity license sets ***************************************************************************************************************************

BTS processing set 1: BTS processing set 2: BTS processing set 3:

*****************************************************************************************************************************

HSDPA throughput settings *****************************************************************************************************************************

*************************************************************************************************************************** HSDPA maximum throughput values ***************************************************************************************************************************

FSME 1, Scheduler 1: System default FSME 1, Scheduler 2: System default

***************************************************************************************************************************** HSUPA settings *****************************************************************************************************************************

Frequency Domain Equalizer in use: No Default CQI value for HS cell FACH state: 255 Number of blind repetition for HS cell FACH state: 255

*************************************************************************************************************************** Local cell group Group 1 ***************************************************************************************************************************

Minimum HSUPA users: 0 Minimum baseband decoding capacity: 0

*************************************************************************************************************************** Happy bit ratio measurement ***************************************************************************************************************************

Small transmission filtering in use: Yes User Equipment Power Headroom (UPH) filtering in use: Yes UPH threshold: 10

*************************************************************************************************************************** HSUPA capacity license sets ***************************************************************************************************************************

BTS processing set 1:

***************************************************************************************************************************** HSPA Quality of Service settings *****************************************************************************************************************************

------------------------------------------------------------------ SPI class HSPA scheduling weight HSDPA congestion control policy ------------------------------------------------------------------ 15 0 Control data over GBR

14 0 Control data over GBR 13 0 Control data over GBR 12 40 Control all data 11 35 Control all data 10 30 Control all data 9 25 Control all data 8 20 Control all data 7 15 Control all data 6 10 Control all data 5 9 Control all data 4 8 Control all data 3 6 Control all data 2 5 Control all data 1 2 Control all data 0 1 Control all data

Resource reservation for non-NBR connections: 10%

***************************************************************************************************************************** Antenna line management *****************************************************************************************************************************

*************************************************************************************************************************** FRGF 1.1.1 ANT 1 ***************************************************************************************************************************

3GPP/AISG Communication in Use: Yes DC Voltage in Use: Yes

*************************************************************************************************************************** FRGF 1.1.1 ANT 2 ***************************************************************************************************************************

DC Voltage in Use: Yes

*************************************************************************************************************************** FRGF 1.1.1 ANT 3 ***************************************************************************************************************************


*************************************************************************************************************************** FRGF 1.1.1 ANT 4 ***************************************************************************************************************************


***************************************************************************************************************************

FRGF 1.1.1 ANT 5 ***************************************************************************************************************************


*************************************************************************************************************************** FRGF 1.1.1 ANT 6 ***************************************************************************************************************************


*************************************************************************************************************************** Antenna line features ***************************************************************************************************************************

Flexi WCDMA BTS 3GPP antenna tilt support in use: No License: Requires Flexi WCDMA BTS 3GPP Antenna Tilt Support (311) Antenna line supervision in use: No License: Requires Antenna Line Supervision (309) RX signal level monitoring in use: No License: Requires RX Signal Level Monitoring (1216)

***************************************************************************************************************************** Antenna line settings *****************************************************************************************************************************

*************************************************************************************************************************** FRGF 1.1.1 ANT 1 ***************************************************************************************************************************

************************************************************************************************************************* Antenna settings *************************************************************************************************************************

Feeder loss: -3.0 PHS filter in use: No PHS filter delay: Multiradio combiner in use: No Combiner type: Feeder voltage: Cable length: Velocity factor:

Multiplexer usage: None Diplexer amount: 1 Diplexer delay: 25 Diplexer loss: 0.0 VSWR minor fault: VSWR major fault: User-defined RTT delay: Yes RTT delay: 8.2 Additional RX gain: 0.0 Uplink Delay: 0

***************************************************************************************************************************** System Module external fault and control settings *****************************************************************************************************************************

*************************************************************************************************************************** External fault lines ***************************************************************************************************************************

*************************************************************************************************************************** External control lines ***************************************************************************************************************************

***************************************************************************************************************************** Radio Module external fault and control settings *****************************************************************************************************************************

***************************************************************************************************************************** Modules *****************************************************************************************************************************

Module Product code Serial number FSME1 471469A TY131405865 CORE_FSME1 083833A.105 TY131405865 FRGF 1.1.1 471483A CORE_FRGF 1.1.1 083837A.103 K9102302384

***************************************************************************************************************************** States *****************************************************************************************************************************

BTS state: BTS configured

*************************************************************************************************************************** IUB links ***************************************************************************************************************************

************************************************************************************************************************* FSME 1 *************************************************************************************************************************

SAAL2: Connected

*************************************************************************************************************************** Local cell 30760 ***************************************************************************************************************************

State: Enabled Blocking state: Unblocked Operational state: Enabled Availability: Inactive

***************************************************************************************************************************** SW configuration *****************************************************************************************************************************

SW package version: WN7.0 1207 753 27

*******************************************************************************************************************************Additional site settings*******************************************************************************************************************************

***************************************************************************************************************************** Certificates in BTS *****************************************************************************************************************************

***************************************************************************************************************************** RET settings *****************************************************************************************************************************

*******************************************************************************************************************************Site tests*******************************************************************************************************************************

***************************************************************************************************************************** Site tests *****************************************************************************************************************************

*****************************************************************************************************************************

EAC functionality test *****************************************************************************************************************************

***************************************************************************************************************************** Test models *****************************************************************************************************************************

***************************************************************************************************************************** BER test *****************************************************************************************************************************

*******************************************************************************************************************************Active Faults*******************************************************************************************************************************

***************************************************************************************************************************** Critical - LOS on unit 1, interface 1. (61029) *****************************************************************************************************************************

Time: Nov 21, 2013 7:26:45 PM Source: TRS: Unit 1 / IF 1 Code: 61029

***************************************************************************************************************************** Critical - LOS on unit 1, ethernet interface 2. (61029) *****************************************************************************************************************************

Time: Nov 21, 2013 7:26:46 PM Source: TRS: Unit 1 / EIF 2 Code: 61029

***************************************************************************************************************************** Critical - Synchronisation lost. (61058) *****************************************************************************************************************************

Time: Nov 21, 2013 7:26:46 PM Source: TRS: NE Code: 61058

*******************************************************************************************************************************End of Commissioning report*******************************************************************************************************************************

commissioningreport show ground 20131121

Documents