commercial closer - absupply.net · the dc-ctp40 closer has a cast iron body and is recommended for...
TRANSCRIPT
The DC-90 closer is identical to the DC50 series with the ability of spring adjustment. The DC90 series has cast aluminum alloy body and is recommended for use on all commercial applications. Closers with non-hold open arms are UL listed for “A” label fire doors. Fully compliant with opening force requirements for ADA and ANSI/BHMA standards. Closers have full spring adjustment from size 1 to size 4 for ADA Barrier Free and size 3 for standard size. Optional Tri-pack.
• Grade 2 certified, ANSI/BHMA A156.4• UL listed compliant UL10C for positive pressure• Multi-size springs 1-6 adjustable power ADA compliant• Three independent regulating valves- adjustable control sweep,
latch and backcheck cushion • DC-90BF: Pre-adjusted spring size 2 (ADA)• DC-90: Pre-adjusted spring size 3• Non handed• Slimline plastic cover• Warranty: 10 years• Finish: AL, DU, US3
Specifications
BF: Barrier Free/ADA BC: Backcheck DA: Delayed Action SPC: Packed w/ parrallel arm, cover, and thru bolts.
Options
Meets ADA requirements
9¹/₁₆" x ¾" Hole Pattern
Accessories
DC-HOA50Hold Open arm
DC-PAHO50Hold Open
Parallel Arm Bracket
DC-525PABKStandard
Parallel Arm Bracket
COMMERCIAL CLOSERDC-90
The DC-50 closer has a cast aluminum alloy body and is recommended for use on all commercial applications. Closers with non-hold open arms are UL listed for “A” label fire doors. Closers have full spring adjustment from sizes 2-5.
• Grade 2 certified, ANSI/BHMA A156.4• UL listed compliant UL10C for positive pressure• Spring size closers #2, 3, 4, 5• Non handed• Full plastic cover• Warranty: 10 years• Finish: AL, DU
Specifications
BC: Backcheck HO: Hold openSPC: Packed w/ parrallel arm, cover, and thru bolts. (Size 4 only)
Options
DC-52/53DC-54/55
Model #8⅞”9¾”
Body Length8¹/₁₆" x ¾" 9¹/₁₆" x ¾"
Hole Pattern
Accessories
DC-HOA50Hold Open arm
DC-PAHO50Hold Open
Parallel Arm Bracket
DC-SB251¾" Thru Bolts
DC-525PABKStandard
Parallel Arm Bracket
DC-CO50Cover
DC-CO50Cover
DC-NDP45Narrow Drop Plate
1
DC-SB251¾" Thru Bolts
COMMERCIAL CLOSERDC-50
The DC-70 closer has a cast aluminum body and is recommended for use on heavy duty commercial, architectural, and institutional applications. It is tri-packed with regular, parallel, and top-jamb mounting. Closers with non-hold open arms are UL listed for “A” label fire doors. Fully compliant with opening force requirements for ANSI/BHMA standards.
• Grade 1 certified, ANSI/BHMA A156.4• UL listed compliant UL10C for positive pressure• Multi-size springs 2-6 adjustable power. Three
independent regulating valves- adjustable control sweep, latch and backcheck cushion
• Pre-adjusted spring size 3• Non handed• Full plastic cover• Warranty: 10 years• Finish: AL, DU, US3
SpecificationsBC: Backcheck HO: Hold open DA: Delayed Action
Options
11⅛" x ¾" Hole Pattern
Accessories
DC-7009Drop Plate
DC-7003Hold Open arm
DC-7006Hold Open
Parallel Arm Bracket
DC-SB251¾" Thru Bolts
The DC-200 is recommended for use on all aluminum store front doors, wood or hollow metal commercial applications. It is a versatile closer that provides narrow styling. The DC-201 is a multi-size spring model that offers adjustable power with a choice of sizes 3-6 where high rates of closing force are required. The DC-201ADA model also offers adjustable spring power sizes 1-4 for use on interior doors requiring less than 5 lbs of opening force and exterior doors requiring less than 8.5 lbs. This complies with ADA handicap codes and ANSI/BHMA standard requirements.
• Grade 1 certified, ANSI/BHMA A156.4• UL listed compliant UL10C for positive pressure• Aluminum alloy body• Non-handed reversible• Spring size closers #3, 4, 5• Multi-size cosers 1-4, 2-5• DC-201ADA: complies with ADA • Two independent valves control sweep and latch closing speeds- backcheck optional• Packed standard for regular & top jamb mounting• Wood and machine screws• Warranty: 25 years• Finish: AL, DU
Specifications
BC: Backcheck HO: Hold openOptions
9⅞”Body Length
9¹/₁₆" x ¾"Hole Pattern
Accessories
COMMERCIAL CLOSERDC-200
DC-DP1214Drop Plate
DC-HOA1245Hold Open arm
DC-RA1240Regular Arm
DC-TJ1240Top Jamb Extender
DC-HOPAB1245Hold Open
Parallel Arm Bracket
DC-PAB1245Standard
Parallel Arm Bracket
DC-DP1204Narrow Drop Plate
Meets ADA requirements
DC-COV200Cover
2
HEAVY DUTY GRADE 1DC-70
The DC-851/831 closer has a cast aluminum alloy body and is recommended for use on heavy duty commercial, architectural, and institutional applications. It is tri-packed with regular, parallel, and top-jamb mounting. Closers with non-hold open arms are UL listed for “A” label fire doors. Fully compliant with opening force requirements for ADA and ANSI/BHMA standards. Closers have full spring adjustment from sizes 1-6 and are pre-adjusted to size 3.
• Grade 1 certified, ANSI/BHMA A156.4• UL listed compliant UL10C for positive pressure• Multi-size springs 1-6 adjustable power ADA compliant• Three independent regulating valves- adjustable control
sweep, latch and backcheck cushion • DC-851 standard series• DC-831 slimline series• Non handed• Full plastic cover• Warranty: 25 years• Finish: AL, DU
SpecificationsAccessories
Meets ADA requirements
12" x ¾"Hole Pattern
DC-DP851Drop Plate
DC-SB251¾" Thru Bolts
HEAVY DUTY GRADE 1DC-831/851
The DC-DX4361 is recommended for use on heavy duty commercial and institutional applications. It is tri-packed standard and comes with all necessary fasteners, brackets, and soffit plates for versatility. Closers with non-hold open arms are UL listed for "A" label fire doors. Fully compliant with opening force requirements for ADA and ANSI/BHMA standards.
HEAVY DUTY GRADE 1DC-4361
• Grade 1 certified, ANSI/BHMA A156.4• UL listed compliant UL10C for positive pressure• Multi-size springs 1-6 adjustable power ADA compliant• Three independent regulating valves- adjustable control
sweep, latch and backcheck cushion • Tri-packed: regular pull side, top jamb, parallel arm• Aluminum alloy shell• Non handed• Warranty: 25 years• Finish: AL, DU
Specifications
CNS: Cush Action CAHO: Hold open cush
Options
Meets ADA requirements
7½" x 1"Hole Pattern
Accessories
DC-PAB4361Parallel Arm Bracket
DC-SB251¾" Thru Bolts
DC-DP436118Drop Plate Pull Side
DC-DP436118PADrop Plate
Parallel arm
DC- RAHOA4361Hold Open arm
DC-RA4361CNSCushion Arm
DC-RA4361HDHeavy Duty Arm
3
DC-DP851WWide Drop Plate
DC-7003Hold Open arm
DC-7006Hold Open
Parallel Arm Bracket
The DC-CTP40 closer has a cast iron body and is recommended for use on heavy duty commercial, industrial, and institutional applications. It is tri-packed with regular, parallel, and top-jamb mounting. Closers with non-hold open arms are UL listed for “A” label fire doors. Fully compliant with opening force requirements for ADA and ANSI/BHMA standards. Closers have full spring adjustment from sizes 1-6 and are pre-adjusted to size 3.
• Grade 1 certified, ANSI/BHMA A156.4• UL listed compliant UL10C for positive pressure• Multi-size springs 1-6 adjustable power ADA compliant• Three independent regulating valves- adjustable control
sweep, latch and backcheck cushion • Non handed• Full plastic cover• Warranty: 25 years• Finish: AL, DU, US3
Specifications
EXTRA HEAVY DUTY GRADE 1DC-CTP40
Accessories
Meets ADA requirements
DC-DP1840Drop PlatePull Side
DC-DP18G40Drop Plate
Top Jamb Drop
DC-DP18PA40Drop Plate
Parallel Arm
DC-DP18TJ40Back Plate
Top Jamb Mount
DC-CA40Cush Arm
DC-CAHO40Hold-Open Cush
DC-HO40Hold Open Arm
DC-SB251¾" Thru Bolts
5" x 2¾"Hole Pattern
ORDER SPECIFICATIONSPRODUCT DESCRIPTION AND CODING
SECTION SERIES OPTION FINISH
DC 90 BF AL
CTP40SPRBC70
851/8319050 Back check: BC
Barrier Free: BFDelayed Action: DA
Aluminum Painted- ALDuronodic Painted- DU
Polished Brass- US3
Door Closer
- -
4
MODEL SELECTIONDOOR CLOSER
ADA handicap standards state doors require less than 5lbs of opening force for interior doors and 8.5 lbs. for exterior doors. Commercial door closers which feature adjustable spring power sizes 1-4 comply with these standards.
DOOR SIZE WEIGHT CLOSER SIZE
DC-200 44" Interior 36" Exterior 243 lbs. Adjustable 1-4
48" Interior 42" Exterior 258 lbs. Adjustable 2-5
36" Interior 30" Exterior 155 lbs. 3
44" Interior 36" Exterior 243 lbs. 4
48" Interior 42" Exterior 250 lbs 5
DC-50 32" Interior 137 lbs. 2
36" Interior 30" Exterior 155 lbs. 3
44" Interior 36" Exterior 243 lbs. 4
48" Interior 42" Exterior 250 lbs. 5
DC-90 48" Interior 36" Exterior 258 lbs. Adjustable 3-6
44" Interior 36" Exterior 243 lbs. Adjustable 1-4
DC-70 60" Interior 48" Exterior 225 lbs Adjustable 2-6
DC-851 60" Interior 48" Exterior 225 lbs. Adjustable 1-6
DC-831 60" Interior 48" Exterior 225 lbs. Adjustable 1-6
DC4361 60" Interior 48" Exterior 258 lbs. Adjustable 1-6
DC-CTP40 60" Interior 48" Exterior 258 lbs. Adjustable 1-6
5
TACO LCN NORTON DORMA DOR-O-MATIC FALCON RIXSON SARGET YALE CORBIN-
RUSSWIN ARROW
DC-50 NA 9300 NA SC90 NA NA 1100 NA NA
DC-90 NA 9300 NA SC90 NA NA 1100 NA NA
DC-200 1370, 1070*1260 1600 7300/7400 SC60/61 NA 1130 50/51 NA DC300 900N
DC-70 NA 210 8600 SC80 NA 1331 2700 NA 5016N
DC-831 NA 8301 8600 SC80 NA 1431 3301 DC3000 5016N
DC-851 NA 8501 860 SC80FC NA 1431 3501 DC3000 5016N
DC-4361 1460 NA NA NA NA NA NA DC3000 NA
DC-CTP40 4040 7500/7700 8916 SC71 NA 351 5800 DC8000 DC500
TACO CAL-ROYAL INTERNATIONAL GLOBAL RYOBI SENTINEL S. PARKER TAYMOR CRL
DC-50 400 800, 8000 TC2200 D-1550 5000 530, 815, 950
600/690800/1900 DC52/55
DC-90 400 800, 8000 TC2200 D-1550 5000 530, 815, 950
600/690800/1900 DC52/55
DC-200 300,700 1800, 8900 TC200 NA N/A NA NA PR40/42
DC-70 900 9000 TC600 D-3550 NA BF900 NA PR70BF
DC-831 CR801S 5050 TC400 D-3550 9016 NA NA PR50
DC-851 CR801 5000 TC500 D-3550 NA NA NA PR52
DC-4361 NA NA TC4361 NA NA NA NA NA
DC-CTP40 CR441 44CI TC4300 NA 4016 441 NA PR90
COMPARISON CHARTDOOR CLOSER
6
Trans-Atlantic Co. Architectural Catalog
www.transatlanticco.com
Tel: 800.523.9956Fx: 800.531.0844
1
The ED-600 series "rim type" exit device is suitable for all doors (aluminum, hollow metal, or wood) where there is no projection on the face. It is appropriate for all heavy duty commercial and industrial applications. Fits doors up to 48".
Meets ADA requirementsED-0SEX600Overlapping
Strike
ED-SF1Strike Filler
ED-LF1Latch Filler
Accessories
ED-RC051Rim Cylinder
HEAVY DUTY RIM EXIT DEVICEED-600
• ANSI A156.3 Grade 1 • ED-F600: UL10C Fire rated; barrier• XL: doors up to 48"• Non-handed• Door width: up to 36"• Comes with standard strike and shim• Dogging standard ONLY on non-UL fire rated• Warranty: 10 years• Finishes: AL, DU, US32D
Specifications
The ED-VR600 panic device blends the utility of a vertical rod application with the appearance of a modern style panic device. it is non-handed and reversible with a contoured cross bar that will fit doors up to 36". Suitable for heavy duty commercial and industrial applications.
Meets ADA requirements
Accessories
• ANSI A156.3 Grade 1 • ED-FVR600: UL10C Fire rated; barrier• Non-handed• Door width: up to 36"• XL: doors up to 48"• Comes with standard strike and shim• Dogging standard ONLY on non-UL fire rated• 12" Extension Rod available• Warranty: 10 years• Finishes: AL, DU
Specifications
HEAVY DUTY SURFACE VERTICAL RODED-VR600
ED-LV610Passage
ED-KB600ED-LV600
Entry
ED-KB680ED-LV680Storeroom
ED-THEX600Entry Handlesetw/ Thumbturn
ED-ESEX600Entry Handlesetw/ Thumbturn
ED-RC051Rim Cylinder
ED-LVEX610Passage
ED-KB600ED-LV600
Entry
ED-KB680ED-LV680Storeroom
ED-PS09Overlapping
Strike
2
HEAVY DUTY RIM EXIT DEVICEED-501The ED501 series "rim type" exit device is suitable for all doors (aluminum, hollow metal, or wood) where there is no projection on the face. It is appropriate for all heavy duty commercial and industrial applications. Fits doors up to 36" and XL for 48".
The EDVR531 panic device blends the utility of a vertical rod application with the appearance of a modern style panic device. it is non-handed and reversible with a contoured cross bar that will fit doors up to 36"-48". Suitable for heavy duty commercial and industrial applications.
Meets ADA requirements
• ANSI A156.3 Grade 1 • ED-F501: UL10C Fire rated; barrier• Non-handed• EAK500: Alarm kit• Door width: up to 36"• Available in XL for 48"• Comes with standard strike and shim• Dogging standard ONLY on non-UL fire rated• Warranty: 1 year • Finishes: AL, DU, US32D
Specifications
• ANSI A156.3 Grade 1 • EDFVR531: UL10C Fire rated; barrier• Door width: 36"• XL: doors up to 48"• EAK500: Alarm kit• Comes with standard strike and shim• Doors height: 7'• 12" Extension Rod available• Dogging standard ONLY on non-UL fire rated• Warranty: 1 year • Finishes: AL, DU
Specifications
HEAVY DUTY SURFACE VERTICAL RODED-VR531
Meets ADA requirements
ED-PP05Pull Plate
w/ cyl. hole
ED-PP06Pull Plate
Accessories
ED-BKL580ED-LHL580Storeroom
ED-BKL500ED-LHL500
Entry
ED-BKL510ED-LHL510
Passage
ED-PS09Overlapping
Strike
ED-SF1Strike Filler
ED-LF1Latch Filler
ED-RC051Rim Cylinder
EAK500Alarm Kit
Accessories
ED-BKL580ED-LHL580Storeroom
ED-BKL500ED-LHL500
Entry
ED-BKL510ED-LHL510
Passage
ED-PS09Overlapping
Strike
ED-SF1Strike Filler
ED-LF1Latch Filler
ED-RC051Rim Cylinder
EAK500Alarm Kit
3
NARROW STILEED-301
The ED-301 "crash bar" style exit device are suitable for narrow, medium, or wide stile aluminum and hollow metal doors. It is designed for all heavy duty commercial and industrial applications. It is non-handed with a contoured cross bar that will fit doors up to 36" and can be field measured to accommodate narrow doors.
Meets ADA requirements
Meets ADA requirements
The ED-VR331 panic devices blend the utility of a vertical rod application with the appearance of a traditional panic device. it is non-handed and reversible with a contoured cross bar that will fit doors up to 36".
• ANSI A156.3 Grade 2 • Contoured aluminum• Stainless Steel springs• Latch Case: 1¼" w x 7¼" l with ½" throw• Backset: 1 5/32" • Strike: rim mounted roller strike with shim• Projection: 4½" • Stile: 2" minimum• Non handed• Door thickness: 1¾" standard• Door width: up to 36" and shoulder mounting studs with set screws.• Thumbturn dogging• Warranty: 1 year • Finishes: AL, DU
Specifications
• ANSI A156.3 Grade 2• Contoured aluminum• Interlocking top and pullman bottom latch• Non handed• Door thickness: 1¾" standard• Door width: up to 36"• Door height: up to 7'• Fasteners: furnished with sheet metal, machine screws and shoulder mounting studs with set screws.• 12" Extension Rod available• Warranty: 1 year • Finishes: AL, DU
Specifications
VERTICAL SURFACE RODED-VR331
Accessories
ED-BKL580ED-LHL580Storeroom
ED-BKL500ED-LHL500
Entry
ED-BKL510ED-LHL510
Passage
ED-PS08Overlapping
Strike
ED-SF1Strike Filler
ED-LF1Latch Filler
ED-RC051Rim Cylinder
Accessories
ED-BKL580ED-LHL580Storeroom
ED-BKL500ED-LHL500
Entry
ED-BKL510ED-LHL510
Passage
ED-PS08Overlapping
Strike
ED-SF1Strike Filler
ED-LF1Latch Filler
ED-RC051Rim Cylinder
4
• A156.3 Grade 2• Narrow Stile• Includes rim cylinder• Underwriter's Laboratories Inc. Listed Panic
Hardware• Requires a 2" mounting surface for typical use
with narrow, medium, and wide style aluminum doors, hollow metal or wood doors.
• Non-handed• Latch bolt throw ⅝"• Dogging by hex key in touch bar• Outside latching with standard rim cylinder• Standard units for 36" and 48"• Can be used for 30" doors• Warranty: 10 years• FInishes: AL, DU
Specifications
HEAVY DUTY RIM EXIT ED-STED
The ED-STED narrow stile "rim type" style exit device is stuiable for all doors where there is no projection on the face. Manufactured of extruded anodized aluminum, the ED-STED is durable enough for the most demanding applications. A rim cylinder is included.
Accessories
ED-RC051Rim Cylinder
ED-STEDPULLAluminum Pull
The ED-STEDCVR narrow stile "concelaed vertical rod" style exit devices are suitable for all doors where there is no projection on the face. Manufactured of extruded anodized aluminum, the ED-STEDCVR is durable enough for all applications.
• A156.3 Grade 2• Narrow style• Includes mortise cylinder and mounting pad• Underwriter's Laboratories Inc. Listed Panic
Hardware• Fore use with narrow, medium, and wide
stile aluminum doors• Non-handed• Outside latching and dogging by cylinder
key or dogging by hex key in touch bar• Unit uses standard mortise cylinder with MS
type cam• Standard units for 36" and 48" door widths• Can be field sized up to 84" in height• Can be used with 30" wide doors• Warranty: 10 years• Finishes: Al, DU
Specifications
CONCEALED VERTICAL RODED-STEDCVR
Accessories
ED-TH1100-BCMortise Cylinder
ED-STEDPULLAluminum Pull
CYLINDER MOUNTING PADwith locking ring
• A156.3 Grade 2• Contoured anodized aluminum cross bar• Latch Case: 1¼" w x 7¼" l with ½" throw• Backset: 1 5/32" from edge of door to center line• Strike: rim mounted roller strike with shim• 4¾" projection• 1⅞"minimumstile• Handed. Must specify LH or RH• Door thickness: 1¾"• Up to 42" wide door• Field sizing ability• Recommended installation at 39 13/32" from floor
to center line of latch assembly• Furnished with sheet metal, machine screws• Accepts rim cylinder only• Dogging: inside- push up dog pin rotate with
screwdriver• Warranty: 10 years• FInishes: AL, DU
Specifications
NARROW STILE ED-1100The ED-1100ED "crash bar" style exit devices are suitable for narrow, medium, or wide stile aluminum and hollow metal doors. It is handed with a contoured cross bar that will fit doors up to 42" wide and can be field sized to accomodate narrow doors.
Accessories
CONCEALED VERTICAL ROD ED-1100CVR
The ED-1100CVR panic device blends the utility of a vertical rod application with the appearance of a tradtional panic device. It is non-handed and reversible with a contoured cross bar that will fit doors up to 42" wide and can be field sized to accomodate narrow doors.
• A156.3 Grade 2• Contoured anodized aluminum cross bar• Latch Case: 1¼" w x 7¼" l• Backset: Center template• Strike: flat mortise• 4¾" projection• 1⅞"minimumstile• Handed. Must specify LH or RH• Door: 1¾" thick, 7' hieght• Up to 42" wide door• Field sizing ability• Recommended installation at 35 11/16" from floor
to center line of latch assembly• Furnished with sheet metal, machine screws• Accepts mortise cylinder• Dogging: inside- push up dog pin rotate with
screwdriver• Warranty: 10 years• FInishes: AL, DU
Specifications
ED-1100PLEDPull Plate
w/ cyl. hole
ED-1100PLDUMPull Plate
ED-RC051Rim Cylinder
ED-1100PLEOExit Only Plate
Accessories
ED-TH1100-BCMortise Cylinder
ED-1100CVRPADCylinder Mounting
Trim
5
ANSI GRADE MATERIAL INTERN TELL S.PARKER CRL
A156.3- Grade 1 Steel ED-600 8600 9500 NA NA
A156.3- Grade 1 Steel ED-VR631 86305 9400 NA NA
A156.3- Grade 1 Steel ED-501 55105 8300 VL520 NA
A156.3- Grade 1 Steel ED-F501 5510F F8300 52024 NA
A156.3- Grade 1 Steel ED-VR531 55305 8400 520V NA
A156.3- Grade 1 Steel ED-FVR531 5530F F8400 5203V NA
A156.3- Grade 2 Steel ED-301 NA NA NA NA
A156.3- Grade 2 Steel ED-VR301 NA NA NA NA
A156.3- Grade 2 Steel ED-STED 56105 NA NA 35A
A156.3- Grade 2 Steel ED-VRSTED NA NA NA 3347A
A156.3- Grade 2 Aluminum ED-1100ED NA NA NA NA
A156.3- Grade 2 Aluminum ED-11OOCVR NA NA NA NA
EXIT DEVICECOMMERCIAL COMPARISON CHART
EXIT DEVICEHANDING DIAGRAM
Left hand Right hand
Left hand, Reverse bevel Right hand, Reverse bevel
LH RH
LHR RHR
Inside Inside
Inside Inside
Outside Outside
Outside Outside
6
Trans-Atlantic Co. Architectural Catalog
www.transatlanticco.com
Tel: 800.523.9956Fx: 800.531.0844
1
• ¾"offsetpivotsforaluminumdoorandframes• Forflushdoor/frameand⅛"recesseddoor
applications• Weatherresistant• Aluminumcaseconstruction• ⅛"verticaladjustment• Fullraceballbearinganddesignprovides
smoothoperationonpivotdoorportion• Nosag,entireweightofdoorsrestsonfloor
mountedpivotportion• Completelytemperproof,yeteasilyremovable,
replaceableinunlockedposition.• TopportionsofArch/Vistawallavailable
separately• Finishes:AL,DU
Specifications
• ¾"offsetpivotsforaluminumdoorandframes• Forflushdoor/frameand⅛"recesseddoor
applications• Weatherresistant• Aluminumcaseconstruction• ⅛"verticaladjustment• Fullraceballbearinganddesignprovides
smoothoperationonpivotdoorportion• Nosag,entireweightofdoorsrestsonfloor
mountedpivotportion• Completelytemperproof,yeteasilyremovable,
replaceableinunlockedposition.• Handed(mustspecifyRightorLeft)• Finishes:AL,DU
Specifications
ARCH/VISTAWALL STYLESF-OP27/31
US ALUMINUM STYLESF-OP34
Trans-Atlantic offset pivots are used for both flush face frameinstallations and⅛" recessed door applciations. Pivots replacemostmajordoormanufacturers.Suitableforaluminumdoorsweighingupto125 pounds. Pivots are engineered and designed for durability, style,andareeasytoinstall.
To order pivots: ForLHRBdoororderRHpivot ForRHRBdoororderLHpivot
SF-OP34
SF-OP27Non-Handed
SF-OP31Handed
OFFSET PIVOTS STOREFRONT HARDWARE
2
Specifications
PITTCO STYLESF-OP41
• ¾"offsetpivotsforaluminumdoorandframes• Forflushdoor/frameand⅛"recesseddoor
applications• Weatherresistant• Aluminumcaseconstruction• ⅛"verticaladjustment• Fullraceballbearinganddesignprovides
smoothoperationonpivotdoorportion• Nosag,entireweightofdoorsrestsonfloor
mountedpivotportion• Completelytemperproof,yeteasilyremovable,
replaceableinunlockedposition.• TopportionsofArmaliteavailableseparately
(non-handed).• Handed(mustspecifyRightorLeft)• Finishes:AL,DU
Specifications
ARMALITE STYLESF-OP40
Trans-Atlanticoffsetpivotsareused forboth flush face frameinstallationsand⅛"recesseddoorapplciations.Pivotsreplacemostmajor doormanufacturers. Suitable for aluminum doorsweighingupto125pounds.Pivotsareengineeredanddesignedfordurability,style,andareeasytoinstall.
To order pivots: ForLHRBdoororderRHpivot ForRHRBdoororderLHpivot
OFFSET PIVOTS STOREFRONT HARDWARE
SF-OP41Pittco
SF-OP40Armalite
• ¾"offsetpivotsforaluminumdoorandframes• Forflushdoor/frameand⅛"recesseddoor
applications• Weatherresistant• Aluminumcaseconstruction• ⅛"verticaladjustment• Fullraceballbearinganddesignprovides
smoothoperationonpivotdoorportion• Completelytemperproof,yeteasilyremovable,
replaceableinunlockedposition.• Nosag,entireweightofdoorrestsonfloor
mountedpivot.• Handed(mustspecifyRightorLeft)• Finishes:AL,DU
3
OFFSET PIVOTS STOREFRONT HARDWARE
ALDORA STYLESF-OP50
Trans-Atlantic offset pivots are used for both flush faceframe installationsand⅛"recesseddoorapplciations.Pivotsreplacemostmajordoormanufacturers.Suitableforaluminumdoorsweighingupto125pounds.Pivotsareengineeredanddesignedfordurability,style,andareeasytoinstall.
SF-OP50Aldora
• ForneworreplacementonYKKmetalframedoorhinges• Flushframeand⅛"recessedstorefront• Diecastaluminum• Fullraceballbearingandoilitebronzebushing• Weatherresistant• Doorweight:upto125pounds• Verticaladjustment⅛"• Nosag,entireweightofdoorsrestsonfloormountedpivot• Completelytemperproof• Fivepiecesetsoldtogether• Specifcyhanding• Finish:Al,DU
Specifications
YKK STYLESF-OP51
SF-OP51YKK
Specifications
• ¾"offsetpivotsforaluminumdoorandframes• Forflushdoor/frameand⅛"recesseddoor
applications• Weatherresistant• Aluminumcaseconstruction• ⅛"verticaladjustment• Fullraceballbearinganddesignprovides
smoothoperationonpivotdoorportion• Completelytemperproof,yeteasilyremovable,
replaceableinunlockedposition.• Nosag,entireweightofdoorrestsonfloor
mountedpivot.• Handed(mustspecifyRightorLeft)• Finishes:AL,DU
4
• Forcommercialdoorsupto500lbs• Nonhanded• Flushor⅛"offsetdoorapplications• High-tensilealuminumalloy• Self-lubricatingpinrotatesonanti-frictionbearings• Securelyfastenedwithtamperproofscrews• Verticaladjustmentscrew• Dooreasilyserviced• Packedandsoldinpairs• 1yearwarranty• Finishes:US28,DU
Specifications
DH-XH5DELUXE HINGE KITThe DH-XH5 Deluxe Hinge Kits are the ideal choice formultipleapplicationdoorsolutions,whenexistinghardwarefails.Aquickandeasyfixforanycompromisedopening.
• (2)rotopinhinges• (12)one-wayscrews• (4)coverstrips• (1)Allenwrenchforverticaladjustment• (2)⅛"shimsforflushdoorapplications• (1)instructionsheet
Deluxe Hinge Kit comes with:
Rotating Hinge Pin
Roller bearing
Vertical Adj. Screw
Thrust bearing
• Forflushdoor/frameand⅛"recesseddoor• A380Precisiondiecastaluminum• Oilitebronzebushingintopframeportion• Fullraceballbearingbottomdoorportions• Doorheightadjustablebybottomdoorportion• Doorweight:upto125pounds• Verticaladjustment:⅛"• Casehardenedstudinfloor/jambposition• Includessteelreinforcementplatesforthedoorportions• Topandbottompivotssoldseparately• SF-OPKTP:Toppivot.Nonhanded• SF-OPKBP:Bottompivot.Handed(mustspecifyLHorRH)• Finishes:AL,DU
Specifications
KAWNEER TOP AND BOTTOM PIVOTSF-OPKTP/OPKBPTrans-Atlantic offset pivots are used for both flush faceframe installations and ⅛" recessed door applciations.Pivots replace most major door manufacturers. Suitableforaluminumdoorsweighingupto125pounds.Pivotsareengineeredanddesignedfordurability,style,andareeasytoinstall.
SF-OPKTPKawneerTopPivot
SF-OPKBPKawneerBottomPivot
5
INTERMEDIATE PIVOTSSTOREFRONT HARDWARE
• ¾"offsetapplicationforaluminumdoorsandframes• Precisionaluminumdiecast• Doorsupto90"inheightshoulduseoneintermediate
pivot.Werecommendanotherintermediatepivotforeachadditional30"
• Fullraceballbearingbackenedbyanoilitebronzebushinginthedoorportion.
• Casehardenedpintojambportionfullyretractableforeaseofinstallation.
• Doorthickness:1¾"• Easyverticaladjustment• PleasespecifyhandingforSF-IP90
Specifications
Trans-Atlantic intermediatepivotsare intendedfor tallerdoors thatrequire additional support to keep the middle part of the door inline with the pivot hinges at the top and bottom. Intended to beused for both flush face frame installations and⅛" recesseddoorapplications. The pivots cannot be used on center hung doors.Suitableforaluminumdoorsweighingupto125pounds.Ourpivotsare engineered and designed for durability, style, and are easy toinstall.
INTERMEDIATE PIVOTSF-IP10
ARCH/ALMARLITE STYLESF-IP20
KAWNEER STYLESF-IP30
INTERMEDIATE PIVOTSF-IP90
6
REINFORCEMENT PLATES STOREFRONT HARDWARE
• Madefromhighestqualitymaterials• Functionsasbackingplateforbutthinge• Increasessagresistance,rigidity• Installationforwood,hollowmetaland/or
aluminumcommercialdoorapplications.• Plates3/16"thick• Solidindividually• Silvermetallicfinish
Specifications
Trans-Atlantic reinforcement plates are designedtobringextra security andstability to the surfacemounted hardware of commercial doors. Platesareintendedtobeusedasabackingplatefor4½"standardbutthingesonmostdoors.
951 TUL MODELSF-RP951-TUL
951 A MODELSF-RP124-FZCP
951 P MODELSF-RP124D-DZCP
951 U MODELSF-RP124D-2ZCP
951 UJ MODELSF-RP124D-3ZCP
951 TU MODELSF-RP124D-4ZCP
DOOR ACCESSORIESSTOREFRONT HARDWARE
• Springloadedleveraction• Rodextension:⅞"throw• Backset:⅞"• Faceplate:15/16"and4½"with5/32"radius
corner• Square½"nylontipwithbeveledcornersto
preventbinding• Suppliedwithnylonkeeperandfasteners• Finishes:AL,DU
Specifications
Mortiseflushboltforuseonallcommercialstorefrontandarchitecturalaluminumandglassnarrowstiledoors.Madefor easy installation, replacesmost brands of store frontflushbolts.
• SF-195:10"longwith⅛"offset(standardmodel)• SF-196:10"longwith¼'offset
Rod length and offset:
FLUSH BOLTSSF-195/196
• Pushbarlength:33"• Pullbarheight:10"• Barwidth:3¼"• Mountingdiameter:1"• Projection:2½"• Meantforstandard1¾"doors• Attractivedesigncombinationsincrease
usabilityforpeopleofallheights• Finishes:Al,DU
Specifications
Dual Pull Bar SF-DPB
Offset Pull Bar SF-OPB
PULL BARSSF-DPB/OPB
7
STRIKES
• Threefunctions:deadbolt,hookbolt,deadlatch• Availablebacksets:31/32", 1⅛"• Faceplate:1"wx6⅞"L;aluminum• Casedimensions:⅞"wx6"lxdepth(seechart)• Non-handedandreversible• Deadlatches:zincalloylatchboltwithDelrinplastic
insert,auxiliaryboltzincdiecast,deadlockslatchboltandpreventsmanipulation.
• Finishes:AL/DU
Specifications
SF-DL3200/4700 SeriesDeadlatch
SF-HL3200 SeriesHookbolt
SF-DB3200 SeriesDeadbolt
Function Backset Case Depth Latchbolt
Deadbolt 31/32", 1⅛" 1.62" on 31/32" backset1.78" on 1⅛" backset ⅝" x 1⅜" with 1⅜" throw
Hookbolt 31/32", 1⅛" 1.62" ⅝" x 1⅜" with 13/16" throw
Deadlatch-DL3200 31/32", 1⅛" 1.63" - 1.78" ⅝" x 1" with ½" throw
Deadlatch-DL4700 31/32", 1⅛" 1.63" - 1.78" ⅝" x 1" with ⅝" throw
• Unlessspecified,willbesuppliedwithflatfaceplate• AllRadiusfaceplateswithweatherstripsarehanded• Finishes:AL,DU
Flat Radius Radius w/ Weather Strip Left Bevel Right Bevel
SF-FPDB SF-RPDB SF-WPDBLH/RH SF-BPDBLH SF-BPDBRH
SF-FPDL SF-RPDL SF-WPDLLH/RH SF-BPDLLH SF-BPDLRH
SF-FPHL SF-RPDB SF-WPDBLH/RH SF-BPDBLH SF-BPDBRH
FACE PLATES
Specifications
MORTISE LOCKS NARROW STILE
8
9
CYLINDERSCOMMERCIAL GRADE MORTISE CYLINDERS
Mortise Cylinder Thumbturn Cylinder Dummy Cylinder Rim CylinderED-RC051
Part Description Keyways Keyed Finishes Cam Packed
DL-CYLTA550 1"MortiseKeyCylinder5pintumbler,solidbrass Y-K-S-A-N KD, KA2,
KA50, MKAl, DU,
US3, 26D A, C 1-2/box150/case
DL-CYLTA555 1" Mortise Key Cylinder5 pin tumbler, diecast Y-K-S-A-N KA2, KA50,
MKAl, DU,
US3, 26D A 2/box150/case
DL-CYLTA560 1⅛" Mortise Key Cylinder6 pin tumbler, solid brass Y-K-S-A-N KD, KA50 Al, DU,
US3, 26D C 1/box150/case
DL-CYLTA580 1¼" Mortise Key Cylinder6 pin tumbler, solid brass Y-K-S-A-N KD, KA50 Al, DU,
US3, 26D C 1/box150/case
DL-CYLTA570 1" Mortise Thumbturn CylinderSolid brass
Al, DU, US3, 26D A 1/box
150/case
DL-CYLTA577 1" Mortise Thumbturn CylinderDiecast
Al, DU, US3, 26D A 1/box
150/case
DL-CYLTA595 1" Mortise Dummy CylinderSolid Brass
Al, DU, US3, 26D
1/box150/case
ED-RC051 1" Rim CylinderSolid Brass S KD, KA US26D,
DU10/box50/case
MORTISE CYLINDER GUARDS
DL-FSB1¾"StandardCylinderRing
DL-HSTMCRAnti-wrenchcylinderguard
DL-NFSBCylinderSpaceRing
1⅜"x¼"
DL-SBNRCRNon-recessed
⅜"solidextruded
• Forusewithdeadlatch• Doublestriketobeusedwhen
convertinganarrowstilelocktoadeadlatch,tocoverelongatedslotinaluminumframe.
SINGLE STRIKESF-DSL1
DOUBLE STRIKESF-DSL2
• Forusewithmortisecylinder• Finishes:AL,DU,US3,26D
• S:SchlageC• A:Arrow• Y: Yale8
KEYWAY CODE
• 2keyspercylinder• KD: Keyeddifferent• KA: Keyedalike• KA2:Keyedalike;groupsof2• KA50:Keyedalike;groupsof50
KEYING
10
• Y: Yale8• K: Kwikset• S:SchlageC• A:Arrow• N: SargentLA-C
KEYWAY CODE
• 2keyspercylinder• KD: Keyeddifferent• KA: Keyedalike• KA2:Keyedalike;groupsof2• KA50:Keyedalike;groupsof50• MK: Masterkey
KEYING
• Paddle:extrudedaluminum• Housing:zincalloy,blackhardcoatfinish• Operatingassembly:steelmechanism• Specifyhanding:RH/LH• Paddlereversible• Standardpacking:paddlearm,operatinghousing,binder
posts,camplug,selfadhesivedecals,andmountinghardware• Finishes:AL,DU
Specifications
SF-EPP496PUSH PADDLEForusewith theSF-DL3200/4700deadlatchmortiselock. Paddle is fourway reversible.Handing can bereversed on cam plug by removing the C-clip andflippingthecamoverandreinstallingC-clip.
SF-LH4560 LEVERLEVER HANDLE
• Lever:aluminumalloycast• Escutcheon:Aluminum1⅜"x4",heavydutyspringmecha-
nismpreventssaggingofleverhandle• Spindle:wroughtsteel,¼"squarehardenedheattreated• Handing:reversible,non-handed• Operation:turningleverdownwardwillactivedeadlatch• Standardpackage:Camplugincluded,allmountingscrews,
templates,andinstallationinstructions.• Finishes:AL,DU
Specifications
For usewith ourSF-DL3200/4700deadlatchmortise lockor any other brand of narrow stile mortise deadlatch.Lever is four-way reversible.Handing can be reversed oncam plug by removing C-clip and flipping the cam overand reinstallingC-clip.Camplug is secured to leverby2hardenedsteelpins.Campluglocksintodeadlatchbyuseofsetscrewindeadlatch.
Type Operation Use
PULL- left hand Outsideoflefthandreversedoororinsideofrighthand
PUSH- left hand Outsideoflefthanddoororinsideofrighthandreverse.
PULL- right hand Outsideofrighthandreversedoororinsideoflefthand.
PUSH- right hand Outsideofrighthanddoororinsideoflefthandreverse
Trans-Atlantic Co. Architectural Catalog
www.transatlanticco.com
Tel: 800.523.9956Fx: 800.531.0844
1
• Availableinfullmortiseandsurfacemount• 6063T6Aluminumalloy,withinterlocking
extrusions• Non-handeddesign• 83"or95"length• Standarddutywith16thrusttypeself-lubricating
concealedbearingsperhinge• Heavydutywith32thrusttypeself-lubricating
concealedbearingsperhinge• Highdegreeofsecurity• Anodizedaluminumaftermachining• Throughboltandmachinescrewsfixing• Templatedholepatterns• 10yearwarranty
Specifications
FULL MORTISEGEARED CONTINUOUS HINGE
• Mortisetype• Flushmount• Eachhingeleafhasanalignmentstop• ¼"clearancebetweendoorandframe
21/32”
1-19/32”
1/4”
GHMT10
GHFS30
1-7/16”
1-5/32”3-3/16”
25/32”
19/32”
1/32”
25/32”
7/16”29/32”
1/16”
1/32”
25/32”
1-5/8” 1-9/32”
3-1/16”
GHFS21
11/16”
1-29/32”
GHMT24
5/16” Square Edge Clearance
1/16”
3/4”
CFMDH-1183CFM
• Mortisetype• 1/16"dooroffset• Dooredgeguard• 5/16"clearancebetweendoorandframe
FM2DH-1183FM221/32”
1-19/32”
1/4”
GHMT10
GHFS30
1-7/16”
1-5/32”3-3/16”
25/32”
19/32”
1/32”
25/32”
7/16”29/32”
1/16”
1/32”
25/32”
1-5/8” 1-9/32”
3-1/16”
GHFS21
11/16”
1-29/32”
GHMT24
5/16” Square Edge Clearance
1/16”
3/4”
2
• Availableinfullmortiseandsurfacemount• 6063T6Aluminumalloy,withinterlockingextrusions• Non-handeddesign• 83"or95"length• Standarddutywith16thrusttypeself-lubricatingconcealed
bearingsperhinge• Heavydutywith32thrusttypeself-lubricatingconcealed
bearingsperhinge• Highdegreeofsecurity• Anodizedaluminumaftermachining• Throughboltandmachinescrewsfixing• Templatedholepatterns• 10yearwarranty
Specifications
21/32”
1-19/32”
1/4”
GHMT10
GHFS30
1-7/16”
1-5/32”3-3/16”
25/32”
19/32”
1/32”
25/32”
7/16”29/32”
1/16”
1/32”
25/32”
1-5/8” 1-9/32”
3-1/16”
GHFS21
11/16”
1-29/32”
GHMT24
5/16” Square Edge Clearance
1/16”
3/4”
• Fullsurfacecontinuoushinge• Fornarrow(limited)frameapplications• Tamperresistantremovabledoorleafcover• 1/32"clearancebetweendoorandframe
21/32”
1-19/32”
1/4”
GHMT10
GHFS30
1-7/16”
1-5/32”3-3/16”
25/32”
19/32”
1/32”
25/32”
7/16”29/32”
1/16”
1/32”
25/32”
1-5/8” 1-9/32”
3-1/16”
GHFS21
11/16”
1-29/32”
GHMT24
5/16” Square Edge Clearance
1/16”
3/4”
• Fullsurfacecontinuoushinge• 1/32"doorpaneloffset• Tamperresistantremovabledoorleafcover• 1/16"clearancebetweendoorandframe
FULL SURFACEGEARED CONTINUOUS HINGE
FULL SURFACEDH-1183
LIMITED FRAMEDH-1183LF
Trans-Atlantic Co. Architectural Catalog
www.transatlanticco.com
Tel: 800.523.9956Fx: 800.531.0844
Roton Select Pemko
Standard Duty 83"
Heavy Duty 83"
Standard Duty 95"
Heavy Duty 95"
DH-1183CFMDH-1183
DH-1183FM2DH-1183LF
DH-1183CFMHDDH-1183HD
DH-1183FM2HDDH-1183LFHD
DH-1195CFMDH-1195
DH-1195FM2DH-1195LF
DH-1195CFMHDDH-1195HD
DH-1195FM2HDDH-1195LFHD
780-112780-210780-224780-157
780-112HD780-210HD780-224HD780-157HD
780-112780-210780-224780-157
780-112HD780-210HD780-224HD780-157HD
SL11SL21SL24SL57
SL11HDSL21HDSL24HDSL57HD
SL11SL21SL24SL57
SL11HDSL21HDSL24HDSL57HD
FMSLFFSFM
FSCP
FMSLFHDFSHDFMHD
FSCPHD
FMSLFFSFM
FSCP
FMSLFHDFSHDFMHD
FSCPHD
Trans-Atlantic
1
• Commercial:Standardandheavyweight• Plainandballbearing• Pin:Steelnon-risingremovablewithbuttontip• Type:Fullmortise• Corner:squarecornerstandard• Door:Formediumtoheavyweightdoor• Frequency:Fromlowtohighopenings• Fasteners:Packedwithwoodandmachinescrews• Installation:Templatescrewholelocations• Soldasboxof3
Specifications
• PlainBearingconformstoANSIA8133• BallBearingconformstoANSIA8112• HeavyDutyBallBearingconformstoANSIA8111• StainlessSteelPlainconformstoANSIA5133• StainlessSteelBallconformstoANSIA5112• StainlessSteelHDBallconformstoANSIA5111
ANSI/BHMA Standards
COMMERCIAL HINGES
Model Finish Base Material Size Bearing Type Thickness
DH-BB179RC532NRP454 US10B,26D Steel 4.5"x4" BallBearing,NRP FullMortise .134"
DH-SSBB179RC532NRP454 US10B,32D StainlessSteel 4.5"x4" BallBearing,NRP FullMortise .134"
STOREFRONT HINGES• Commercial:standardweight• Bearing:Ballbearing• Pin:Steelnon-risingremovablewithbuttontip• Type:Fullmortise• 5/32"radiuscorner• Fasteners:Packedwithwoodandmachinescrews• 3hingesperbox
Specifications
Model Finish Base Material Size Bearing Type Thickness
DH-BB179SQ3535 US26D Steel 3.5"x3.5" BallBearing FullMortise .119"
DH-PB190SQ454 USP,3,4,10B,26,26D Steel 4.5"x4" PlainBearing FullMortise .134"
DH-BB179SQ454 USP,3,4,10B,26,26D Steel 4.5"x4" BallBearing FullMortise .134"
DH-BB179SQNRP454 USP,3,4,10B,26,26D Steel 4.5"x4" BallBearing,NRP FullMortise .134"
DH-PB190SQ4545 USP,3,4,10B,26,26D Steel 4.5"x4.5" PlainBearing FullMortise .134"
DH-BB179SQ4545 USP,3,4,10B,26,26D Steel 4.5"x4.5" BallBearing FullMortise .134"
DH-BB179SQNRP4545 USP,3,4,10B,26,26D Steel 4.5"x4.5" BallBearing,NRP FullMortise .134"
DH-SSBB179SQ454 US32D StainlessSteel 4.5"x4" BallBearing FullMortise .134"
DH-SSBB179SQNRP454 US32D StainlessSteel 4.5"x4" BallBearing,NRP FullMortise .134"
DH-SSPB190SQ4545 US32D StainlessSteel 4.5"x4.5" PlainBearing FullMortise .134"
DH-SSBB179SQ4545 US32D StainlessSteel 4.5"x4.5" BallBearing FullMortise .134"
DH-SSBB179SQNRP4545 US32D StainlessSteel 4.5"x4.5" BallBearing,NRP FullMortise .134"
DH-BB168SQ4545 US26D Steel 4.5"x4.5" BallBearing FullMortise,Heavy Weight .180"
DH-BB168SQNRP4545 US26D Steel 4.5"x4.5" BallBearing,NRP FullMortise,Heavy Weight .180"
DH-SSBB168SQ4545 US26D StainlessSteel 4.5"x4.5" BallBearing FullMortise,Heavy Weight .180"
DH-SSBB168SQNRP4545 US26D StainlessSteel 4.5"x4.5" BallBearing,NRP FullMortise,Heavy Weight .190"
DH-BB168SQNRP545 US26D Steel 5"x4.5" BallBearing,NRP FullMortise,Heavy Weight .190"
DH-SSBB168SQNRP545 US26D StainlessSteel 5"x4.5" BallBearing,NRP FullMortise,Heavy Weight .190"
2
HINGES
HINGES
• Commercial:Standardweight• Singleanddoubleacting• Corner:squarestandard• ¼"or⅝"radiuscorneravailableon
4"x4"hinge• Formediumtoheavyweightdoor• Frequency:Lowtohighopenings• ANSIA81071Fforselfclosinghinges• Packedwithwoodandmachinescrews• Installation:templatescrewholelocations• Soldaspair
Specifications
HINGES SPRING HINGES
HINGE ACCESSORIES
• Handed:LH,RH• Soldaseach• Finish:US26D
ANSI/BHMA Standards
REINFORCING HINGEDH-RP
• Soldaseach• Finish:US4
ANSI/BHMA Standards
HINGE PINDH-PIN
Model Finish Base Material Size Bearing Type Thickness
DH-UL17944 USP,3,4,10B,26D Steel 4"x4" Plainbearing Fullmortise .134"
DH-UL179454 USP,3,4,10B,26D Steel 4.5"x4" Plainbearing Fullmortise .134"
DH-UL1794545 USP,3,4,10B,26D Steel 4.5"x4.5" Plainbearing Fullmortise .134"
DH-5500SA66 USP Steel 6"x6" Plainbearing Fullmortise NA
DH-5579645 USP Steel 6"x4.5" Plainbearing Fullmortise NA
DH-5500SA77 USP Steel 7"x7" Plainbearing Fullmortise NA
DH-TAN5004 BK,GV,USP,3 Steel 4" Plainbearing Fullmortise,doubleaction NA
DH-TAN5005 BK,GV,USP,3 Steel 5" Plainbearing Fullmortise,doubleaction NA
DH-TAN5006 BK,GV,USP,3 Steel 6" Plainbearing Fullmortise,doubleaction NA
Trans-Atlantic Co. Architectural Catalog
www.transatlanticco.com
Tel: 800.523.9956Fx: 800.531.0844
1
The DL-HVB series cylindrical knobset are designed for use on all heavy duty grade 1 commercial applications. They are solid zinc diecast.
IC core option
• Door Thickness: 1¾” - 2”• BacksetULListed:2¾”-face1⅛”-2¼”• Cylinder: Schlage “C” keyway• Keying: Schlage 6 pin keyed• Key: 2 six pin nickel plated• Function: See description page 10• Certification: UL listed ANSI A156.2 Grade 1• Latch: ⅝" projection stainless steel 3 hour UL• Bore:2⅛”holeretrofitsallcylindricallocksets• Strike:ANSI1¼”-4⅞”strike• Non-handed and reversible• Warranty: Lifetime mechanical. 10 year finish. • Finish: US32D
Specifications
DL-HVB SERIESCOMMERCIAL KNOB
COMMERCIAL LEVERDL-LHV SERIES The DL-LHV series cylindrical leverset are designed for use on all heavy duty Grade 1
commercial applications. The LHV series is also ADA compliant and features a free wheeling clutch mechanism option that ensures longevity and security. Solid zinc diecast.
• Door Thickness: 1¾” - 2”• Backset UL Listed: 2¾”-face1⅛”-2¼”• Cylinder: Schlage “C” keyway• Keying: Schlage 6 pin keyed• Key: 2 six pin nickel plated• Function: See description page 10• Certification: UL listed ANSI A156.2 Grade 1• Latch: ⅝" projection stainless steel 3 hour UL• Bore:2⅛”holeretrofitsallcylindricallocksets• Strike: ANSI 1¼”-4⅞”strike• Non-handed and reversible• Vandal Resistant: Clutch free wheeling mechanism option• Warranty: Lifetime mechanical. 10 year finish.• Finish: US26D
Specifications
Meets ADA requirements
IC core option
2
DL-SVB SERIESCOMMERCIAL KNOBThe DL-SVB series cylindrical knobset are designed
for use on all standard grade 2 light commercial and residential applications. Solid zinc diecast.
• Door Thickness: 1¾” - 2”• Backset:2¾”-face1⅛”-2¼”• Cylinder: Schlage “C” keyway• Keying: Schlage 6 pin keyed• Key: 2 six pin nickel plated• Function: See description page 9• Certification: UL listed ANSI A156.2 Grade 1• Latch: ½" projection stainless steel 3 hour UL• Bore:2⅛”holeretrofitsallcylindricallocksets• Strike:ANSI1¼”-4⅞”strike• Non-handed and reversible• Warranty: Lifetime mechanical. 10 year finish. • Finish: US3, 32D
Specifications
IC core option
COMMERCIAL LEVERDL-LSV SERIES
The DL-LSV series cylindrical leverset are designed for use on all standard duty grade 2 light commercial and residential applications. The LSV series is also ADA compliant. Solid zinc diecast.
• Door Thickness: 1¾” - 2”• Backset: 2¾”-face1⅛”-2¼”• Cylinder: Schlage “C” keyway• Keying: Schlage 6 pin keyed• Key: 2 six pin nickel plated• Function: See description page 9• Certification: UL listed ANSI A156.2 Grade 2• Latch: ½" projection stainless steel 3 hour UL• Bore:2⅛”holeretrofitsallcylindricallocksets• Strike: ANSI 1¼”-4⅞”strike• EXBS5: Extension for 5" bracket• Thrubolts are removable• Non-handed and reversible• Vandal Resistant: Clutch free wheeling mechanism option• Warranty: Lifetime mechanical. 10 year finish. • Finishes: US3, 10B, 26D
Specifications
IC core option
Meets ADA requirements
GRADE 2COMMERCIAL LOCKSETS
Saturn Style
Sparta Style
DL-ECB SERIESECONOMY KNOB
The DL-ECB series cylindrical knobset are designed for use on all economy grade 3 residential applications. Solid zinc diecast.
• Door Thickness: 1¾” • Backset:Adjustable2⅜”-2¾"face1”-2¼”• ShimFillerfor1"latchto1⅛"prep• Cylinder: Schlage “C” keyway• Keying: Schlage 5 pin keyed• Key: 2 5 pin nickel plated• Function: See description page 9• Certification: ANSI A 117.1• Bore:2⅛”holeretrofitsallcylindricallocksets• Come with standard T Strike• Non-handed and reversible• Warranty: Lifetime mechanical. 10 year finish. • Finish: US3, 32D
Specifications
The DL-ECL series cylindrical leverset is designed for use on all economy grade 2 residential applications. The ECL series is also ADA compliant. Solid zinc diecast.
• Door Thickness: 1¾” - 2”• Backset:2¾"face1”-2¼”• ShimFillerfor1"latchto1⅛"prep• Cylinder: Schlage “C” keyway• Keying: Schlage 5 pin keyed• Key: 2 5 pin nickel plated• Function: See description page 9• Certification: ANSI 117.1 and ADA• Bore:2⅛”holeretrofitsallcylindricallocksets• ComewithNon-UL1⅛”-2¾”ANSIstrike• Non-handed and reversible• Warranty: Lifetime mechanical. 10 year finish. • Finish: US26D
Specifications
ECONOMY LEVERDL-ECL SERIES
GRADE 3COMMERCIAL LOCKSETS
3
Meets ADA requirements
COMBO ENTRYDL-LSV/SVB LOCKSET
• Door Thickness: 1¾” - 2”• Backset:2¾"face1”-2¼”• Keyed Alike: 1 key operates both lock and
deadbolt• Schlage 6 "C" keyway • DL-SVB53DB251/260: Knob combo lockset• DL-LSV53DB751/760: Lever combo lockset• Certification: UL Listed ANSI A A156.2 Grade 2• Non-handed and reversible• Removable brass cylinders• Warranty: Lifetime mechanical. 10 year finish. • Finish: US26D, 32D
Specifications
ACCESSORIESCOMMERCIAL LOCKSET ACCESSORIES
LATCHES
DeadlatchDL-DL238/234
2⅜",2¾"Backset
SpringlatchDL-SL238/234
2⅜",2¾"Backset
• 2⅜"and2¾"backsets• 1⅛"SQface• DL-DLUL: Fire rated Deadlatch• DL-SLUL: Fire rated Springlatch• DL-ADJ: Adjustable backset• Warranty: 1 year• Finish: US3, US32D
STRIKES
DL-TA0011¼"x4⅞"ASA Strike
DL-TA0191¼"x2¾"
T Strike
DL-TA0181⅛"x1¼"
Dead bolt strike
DL-TA0201¼"x2¼"
Full Lip Strike
• Warranty: 1 year• Finish: US3, 32D
FILLER COVER
• 2⅜"fillerplate• DX-161• Finish: USP
4
5
DEADBOLTSCOMMERCIAL GRADE DEADBOLTS
DL-DB700 SERIESGRADE 2 DEADBOLT
• Door Thickness: 1¾” - 2”• Backset:ULadjustable2⅜”-2¾"• Full 1" Throw Deadbolts• Cylinder: Schlage “C” keyway• Keying: Schlage 6 pin keyed• Key: 2 6 pin nickel plated• Strike:TA-0191⅛”-2¾”strike• Non-handed and reversible• DL-DB751: Single cylinder• DL-DB760: Double cylinder• Matches LHV and LSV series• Warranty: 1 year• Finish: US3, 26D
Specifications
SINGLE CYLINDERDL-DB751
DOUBLE CYLINDERDL-DB760
• Door Thickness: 1¾” - 2”• Backset:Adjustable2⅜”-2¾"• Full 1" Throw Deadbolts• ¼"HeavyGaugeThru-Bolts• Cylinder: Schlage “C” keyway• Keying: Schlage 6 pin keyed• Key: 2 6 pin nickel plated• Matches HVB and SVB Series• Non-handed and reversible• DL-DB251: Single cylinder• DL-DB260: Double cylinder• Warranty: 1 year• Finish: US3, 32D
Specifications
DL-DB200 SERIESGRADE 3 DEADBOLT
DOUBLE CYLINDERDL-DB260
SINGLE CYLINDERDL-DB251
6
• Commercial Grade steel case• Full 1" throw chrome plated heavy duty deadbolt• Door Thickness: 1¾” standard• Backset: 2¾” • Faceplate:1¼"x8"A115.1• Adjustablefromflatto⅛"• Bevel both ways• Cylinder: Schlage “C” keyway• Keying: Schlage 6 pin keyed• Certification: ANSI 156.13-1980• Strike: Standard ASA strike• Finish: US26D
Specifications
MORTISE LOCKSETDL-ML234
• Solid brass Mortise lockset • Reversible latchbolt and levers• Solid brass escutcheons• DoorThickness:1⅜"-1⅞"• Backset: 1¾" narrow stile• Faceplate: 13/16"x1⅞"solidbrass• Cylinder: Schlage “C” keyway• Keying: Rekeyable• Function: Key operated for entry with thumbturn • for unlocking and locking. • Strike: Standard ASA strike• Finish: US3, 15, 26
Specifications
DL-ML800MORTISE LOCKSET
• Solid brass Mortise lockset with reversible latchbolt• DL-DX914: Spindle fixed to escutcheons• DL-DX920: Loose threaded spindle• Full 1" throw chrome plated heavy duty deadbolt• Solid brass knobs and escutcheon plates• Door Thickness: 1¾” standard• Backset: 2½” • Exterior plate: 2¾" x 10" solid brass• Face Plate: 11/16" x 7⅝"• Cylinder: Schlage “C” keyway• Keying: 5 Pin tumbler• Strike: Standard ASA strike • Finish: US3
Specifications
MORTISE LOCKSET DL-DX914/920
MORTISE LOCKS
7
HEAVY DUTY MORTISE LOCKDL-DXML
• Door Thickness: 1¾” • Backset: 2¾"• Faceplate:1¼"x8"• UL 3 Hour fire Listed Latch• 1" Throw Bolt• 1⅛"MortiseCylinder• SC6 Schlage "C" 6 pin keyway• Sectional and escutcheon trim available• Barrier free levers and returns within ½" from door face• Handed (must specify LH or RH) yet field reversible• Dead or spring latch• Levers to be SS or SE• Warranty: 3 years
Specifications
The DL-DXML mortise lockset is designed for all heavy duty commercial and industrial applications. This series meets ADA handicap requirements and meets a 3 hour fire listing.
DL-SEEscutcheon Handleset
DL-SSSectional Leverset
Meets ADA requirements
MORTISE LOCKHEAVY DUTY MORTISE LOCK
• Heavy duty commercial; Grade 1• DL-SS: Leverset; solid brass• DL-SE: Handleset; solid brass
Trim Specifications
8
CYLINDERSCOMMERCIAL GRADE MORTISE CYLINDERS
COMMERCIAL GRADE LOCK CYLINDERS
• DL-3GAKD: knob/lever Cyl. 5 Pin Sargent GA Keyed Diff• DL-3SC1KD: knob/lever Cyl. 5 Pin Schlage C(SC1) Keyed Diff.• DL-3Y1KD: knob/lever Cyl. 5 Pin Yale
UNIVERSAL CYLINDERS
• DL-6GAKD: knob/lever Cyl. 5 Pin Sargent GA Keyed Diff. • DL-6SC1KD: knob/lever Cyl. 5 Pin Schlage C(SC1) Keyed Diff• DL-6Y1KD: knob/lever Cyl. 5 Pin Yale 8(Y1) Keyed Diff.
UNIVERSAL CYLINDERS
Mortise Cylinder Thumbturn Cylinder Dummy Cylinder Rim Cylinder
Part Description Keyways Keyed Finishes Cam Packed
DL-CYLTA550 1" Mortise Key Cylinder5 pin tumbler, solid brass S-A-Y KD, KA,
KA2, KA50Al, DU,
US3, 26D A, C 1-2/box150/case
DL-CYLTA555 1" Mortise Key Cylinder5 pin tumbler, diecast S-A-Y KD, KA,
KA2, KA50Al, DU,
US3, 26D A 2/box150/case
DL-CYLTA560 1⅛" Mortise Key Cylinder6 pin tumbler, solid brass S-A-Y KD, KA,
KA2, KA50Al, DU,
US3, 26D C 1/box150/case
DL-CYLTA580 1¼" Mortise Key Cylinder6 pin tumbler, solid brass S-A-Y KD, KA,
KA2, KA50Al, DU,
US3, 26D C 1/box150/case
DL-CYLT570 1" Mortise Thumbturn CylinderSolid brass
Al, DU, US3, 26D A 1/box
150/case
DL-CYLTA577 1" Mortise Thumbturn CylinderDiecast
Al, DU, US3, 26D A 1/box
150/case
DL-CYLTA595 1" Mortise Dummy CylinderSolid Brass
Al, DU, US3, 26D
1/box150/case
ED-RC051 1” Rim CylinderSolid Brass S KD, KA US26D,
DU10/box50/case
• S: Schlage C• A: Arrow• Y: Yale 8
KEYWAY CODE
• 2 keys per cylinder• KD: Keyed different• KA: Keyed alike• KA2: Keyed alike; groups of 2• KA50: Keyed alike; groups of 50
KEYING
Trans-Atlantic 6-pin cylinders are manufactured with strict quality control to insure precise tolerances and smooth operations. Keying service available in keyed alike, master or construction.
• DL-LC50: G2 Cylinder• DL-LC53: G3 Cylinder• DL-DC50: Deadbolt Cylinder
UNIVERSAL CYLINDERS
9
LOCKSET FUNCTIONS
20 EXIT Blank plate on outside. Interior lever always free.
LSV
40 PRIVACY F76 Push button locking from interior. Lock can be opened from exterior by rotating interior lever. Safety unlock for emergencies.
LHV, LSV, ECLHVB, SVB, ECB
10 PASSAGE F75Both levers are always free
LHV, LSV, ECLHVB, SV-B, ECB
53 ENTRY F109 Push button locking from interior and keyed exterior.
LHV, LSV, ECLHVB, SVB, ECB
70 CLASSROOM F84 Exterior lever locked or unlocked by key. Interior lever always allows egress.
LHV, LSVHVB, SVB, ECB
60 DOUBLE CYLINDER Key in locks unlocks both knobs.
LSV
80 STOREROOM F86 Outside lever is always locked. Key unlatches only.
LHV, LSVHVB, SVB, ECB
DT DUMMY Dummy trim for one side of door
LSV, ECLSVB, ECB
10
COMPARISON CHART
FUNCTION DORMA HAGER CAL-ROYAL PDQ SCHLAGE
PASSAGE DL-LHV10 CL810 3410 (C) GN-30 GT126 ND10S
PRIVACY DL-LHV40 CL840 3440 (C) GN-20 GT176 ND40S
ENTRANCE DL-LHV53 CL853 3453 (C) GN-00 GT116 ND53PD
CLASSROOM DL-LHV70 CL870 3470 (C) GN-03 GT148 ND70PD
STOREROOM DL-LHV80 CL880 3480 (C) GN-04 GT115 ND80PD
FUNCTION DORMA HAGER CAL-ROYAL PDQ SCHLAGE
PASSAGE DL-LSV10 CL710 3510 CSL-30 SP126 AL10S
PRIVACY DL-LSV40 CL740 3540 CSL-20 SP176 AL40S
ENTRANCE DL-LSV53 CL753 3553 CSL-00 SP116 AL53PD
CLASSROOM DL-LSV70 CL770 3570 CSL-03 SP148 AL70PD
STOREROOM DL-LSV80 CL780 3580 CSL-04 SP115 AL80PD
DUMMY DL-LSVDT CL701 3517 CSL-40 SP211 AL170
ORDER SPECIFICATIONSPRODUCT DESCRIPTION AND CODING
SERIES FUNCTION FEATURE FINISH
DL-LHV CL53 26D
US3: Polished BrassUS10B: Oil Rubbed Bronze26D: Brushed ChromeUS32D: Brushed Stainless Steel
ClutchIC Core
PassagePrivacyEntranceClassroomStorefrontDummy
DX-LSVDX-LHVDX-ECLHV-BSV-BECB
• All locksets come standard with 2¾ latch, ANSI strike, and SC1 cylinder.• IC: Core not included. See Cylinders. • Must specify handing, keying preferences, and keyway.• Mustspecifyif2⅜"backsetdesired
Trans-Atlantic Co. Architectural Catalog
www.transatlanticco.com
Tel: 800.523.9956Fx: 800.531.0844
1
• Surfacemounting• Tamperproof• ULListed• 8"Long• 11/16"throw,1⅝"projection• Finishes:US26D,ZP
GH-UL453
SECURITY SURFACE BOLTS
• Concealedmounting• Tamperproof• ULlisted• 8"Long• 1"throw,1⅝"projection• Finishes:US26D
GH-UL831
GH-UL831/UL453
• GH-ULSB197: ULfirerated• GH-197: ExtrudedAluminum• Nonhanded• ⅝"throwwith⅞"verticaladjustment• 12"rodtofitANSIprep.• Springloadedlever• ½"dia.brassbolts• Finishes:US3,26,26D
Specifications
FLUSH BOLTSGH-ULSB197
SECURITY BOLT
• Steelsecuritybolt• Heavyduty• Durablesilversprayedepoxyfinish• 9"with1½"projection• Surfaceormotiseapplication• Polybaggedwithfasteners• Finishes:AL
Specifications
GH-835SE
Speficiations• 5"and8"• Lockingandpadlockablebolt• Extraheavyduty• Rustresistant• Heavyzincplatedbolt,9/16"dia.• Finishes:GV
BARREL BOLTGH-832BB
FOOT BOLT
• Footbolt6"• Operatedbypressureoffootoncap• Releasedbypressureontip• Packagedwithscrewsandstrike• Finishes:Zincplated
Specifications
GH-1057
2
HASPSGH-CD575/CD577/600XHH75
• Garageandutilitydoor• Extraheavyhingehasp• 7½"• Zincplated
GH-600XHH75
CHAIN GUARDGH-1631/DX3700
• Adjustable20"-30½"• Heavydutycommercial• Castbrassmountingplates• 2ruggedcompressionsprings• Vinylcover• Castbrassmountingandplates• Finishes:DU,US26D
GH-1631
• Singlespring• Packwithfasteners• Finishes:ZincPlated
GH-DX3700
GH-1631
GH-3700
• DoubleFlexible• Safetyhasp• 7¾"• Zincplated
GH-CD577• Singleflexible• Safetyhasp• 6¼"• Zincplated
GH-CD575
• Chainbolt6"• Packagedwithscrewsandstrike• Finishes:Zincplated
Specifications
CHAIN BOLTGH-1055
3
• Fitsallhollowmetalorwooddoors• Reversiblehanding• Protectscylindricalandmortiselocksand
guardslatchbolt• Mountstodoorwithheavydutysexbolts• Finishes:US26D
GH-LG109
LATCH GUARDS
• Fitsnarrowlinealuminumdoors• Reverisblehanding• Tamper-proof• Mountstodoorwithheavydutysexbolts• Finishes:AL,DU
GH-LG111
GH-LG109/LG111
DOOR REINFORCERGH-DR45/DR90
MODEL NUMBER SIZE BACKSET DOOR THICKNESS FINISHES
4" Door Reinforcer
GH-DRDB101 4½" 2⅜" 1¾" US3,32D
GH-DRDB102 4½" 2¾" 1¾" US3,32D
GH-DRDB103 4½" 2⅜" 1⅜" US3,32D
9" Door Reinforcer
GH-DRLK104 9" 2⅜" 1¾" US3,32D
GH-DRLK105 9" 2¾" 1¾" US3,32D
GH-DRLK106 9" 2⅜" 1⅜" US3,32D
• 1¾"thickwoodormetaldoors• Solidcastbrass• UL:Firerated• Finishes:US3,26D
Specifications
Doorviewersaremadewithsafetyanddurabilityin mind. Solid cast brass with highly polishedopticlensesforextrawideviewingangles.
DOOR VIEWERSCOMMERCIAL DOOR VIEWERS
• Doors1⅛"-2"thick• Availableindeluxe:GH-DXDCV01• Two-tonechime• 180'viewingangle• Finishes:US3,26D
Specifications
DOOR CHIMEGH-DCV01
GH-UL3300½"bore
190'viewing
GH-UL331511/16"bore200'viewing
GH-SB1909/16"bore
190'viewing
4
• Interlockingflapandframe• Packagedwithscrews• GH-HD390:Letterslot3"x10"• GH-HD490: Magazineslot3½"x13"• Finishes:US3,5,26D
Exterior Spring Mounting• Gravityflapwith¼"airvent• Packagedwithscrews• GH-HD395:Letterslot3"x10"• GH-HD495:Magazineslot3½"x13"• Finishes:US3,5,26D
Interior Gravity Mounting• GH-HD398:Letterslot3"x10"• GH-HD498: Magazineslot3½"x13"• Finishes:US3,5,26D
Interior Trim Plate
MAIL SLOTS HEAVY BRASS
DOOR HOLDERS Drop Down & Step On
• GH-135: 4"Castalloydoorholder• GH-1135:5"Castalloydoorholder• GH-235:4"Solidbrassdoorholder• GH-1235:5"Solidbrassdoorholder• GH-380:5"Doorholder• GH-6015:8"Stepondoorholder• Durablerubbertips• Polybaggedwithsheetmetalscrews• Finishes:US3,26D• 6015Finishes:AL/DU
GH-DS436LowDomeDoorStop
GH-DS438HighDomeDoorStop
GH-DS401ConcaveWallStop
GH-DS406ConvexWallStop
• Wroughtsteelandcastbrass• Suitableforallfloorconditions• Bumpersconstructedfromdurablerubber• Idealforcommercialapplications• Fasteners:screwpacksincluded• Finishes:US3,26D
FLOOR MOUNTED DOOR STOPS
• Wroughtsteelandcastbrass• Suitableforallwallconditions• Bumpersconstructedfromdurablerubber• Fasteners:screwpacksincluded• GH-DS406:AvailableinUS26Donly• Finishes:US3,26D
WALL MOUNTED DOOR STOPS
DOOR STOPSCAST BRASS AND SOLID BRASS
5
PUSH PLATESGH-PP53/54
• Aluminum,solidbrass,stainlesssteelmaterials
• Mountingscrewsfor1¾"thickdoor• Packedwithsheetmetalscrews• ConformstoANSIJ301andA117.1• Finishes:AL,US3,32D
3½"X15"GH-PP53GH-PP54 4"X16"
KICK PLATESCOMMERICIAL
• Aluminum,solidbrass,stainlesssteelmaterials• Stainlesssteelavailable• 16guage(.050")thick• Kickplatesnotbevelled• Othersizesandfinishesavailableuponrequest• Packedwithsheetmetalscrews• ConformstoANSIJ102andANSIA117.1for
ADAbarrier-freeaccessibility• Brasstoneonaluminumavailable• Finishes:AL,BT-AL,US3,32D
GH-KP834 8"x34" GH-KP1034 10"x34"
• Aluminum,solidbrass,stainlesssteelmaterials
• Classicandroundpulls• 16guage(.050")thick• Mountingscrewsfor1¾"thickdoor• Packedwithsheetmetalscrews• ConformstoANSIJ405andA117.1• Finishes:AL,US3,32D
3½"X15"withclassicpullGH-PP5310
3½"X15"withroundpullGH-PP5325GH-PP5425 4"X16"withroundpull
PULL PLATESCLASSIC PULL WITH HANDLE
Meets ADA requirements
TEE HANDLEGH-960
• Polishedchromediecasthandle• Heavyduty• 4"spindle,5/16"square• Reversible• 90degreeturn• Keyingavilalbe:KA,KD• Packagedwith2keys• Finishes:US26
DOOR PULLGH-P531
• Heavycastaluminumdoorpull• 7½"x1⅛"• 2¼"projection• Finishes:AL,DU
6
CABINET PULLSGH-CH44840
• 4"cabinetpulls• Aluminum• 5/16"diameter• Forcabinetdoors¾"-1⅜"thick• Packedwithmachinescrews• Finishes:AL,US26D
HARDWARE BALL CATCHES/ROLLER LATHCES
• Mortiseballcatch• Maximumrollerprojection:5/16"• Latch:1⅜"• Diameter:⅞"• Strikedimensions:1⅜"x2¼"• Finishes:US3
GH-2950
• Rollerlatch• Maximumrollerprojection:5/16"• Latchface:1"x1⅜"• Strikedimensions:2"x1⅜"• Finishes:US3,26
GH-2955
• Driveinballcatch• Maximumrollerprojection:5/16"• Latch:1⅜"• Diameter:1"• Strikedimensions:1⅜"x2¼"• Finishes:US3
GH-2945
• Cabinetmagneticcatch• Solidaluminumhousing• Designedforheavydoors• Holdingpowerupto35lbs• Canbeusedfordoubledoorinstallation• Polybaggedwithscrews• Finishes:AL
MAGNETIC CATCHGH-CH2935
Meets ADA requirements
ADA SIGNAGE• Raisedsymbols&letters• 8"x8"Pictogram• Grade2Braille• 3/16"thickpolystyrene-ABSwithUV
stabilizertoavoidfading• ⅝"raisedlettering• Finishes:Blue,Black
GH-S441Men
GH-S440Women
GH-S442FamilyRestroom
GH-S445MenHandicap
GH-S443WomenHandicap
GH-S444FamilyHandicap
ADA COMPLIANT SIGNAGE
GH-EXITExit
EXIT
Trans-Atlantic Co. Architectural Catalog
www.transatlanticco.com
Tel: 800.523.9956Fx: 800.531.0844
Premium Grab Bars
TM
EZGrab™’s Universal Elegance designer grab bar series offers a variety of styles to add both safety and fashion to any bathroom. Constructed of high-quality, 18-gauge stainless steel, each design is available in both polished chrome and satin stainless steel and in a variety of lengths. Other features include easy-to-install flange mounts to conceal screws and 1-1/4” tubing.
DESIGNERuniversal elegance series
DESIGNER
majestic curve
stylish streamline
Size Satin SS Polished SS
18” GBD-18-1.25-SSDSC GBD-18-1.25-PSDSC
20” GBD-20-1.25-SSDSC GBD-20-1.25-PSDSC
24” GBD-24-1.25-SSDSC GBD-24-1.25-PSDSC
Size Satin SS Polished SS
18” GBD-18-1.25-SSDSA GBD-18-1.25-PSDSA
20” GBD-20-1.25-SSDSA GBD-20-1.25-PSDSA
24” GBD-24-1.25-SSDSA GBD-24-1.25-PSDSA
universal elegance series
2
DESIGNER
sophisticated accentsSize Chrome Accent Bronze Accent
16” GBD-16-1.5-WHCH GBD-16-1.5-WHBZ
24” GBD-24-1.5-WHCH GBD-24-1.5-WHBZ
universal elegance series
simplistic fashion straightSize Satin SS Polished SS
18” GBD-18-1.25-SSDSB GBD18-1.25-PSDSB
20” GBD-20-1.25-SSDSB GBD20-1.25-PSDSB
24” GBD-24-1.25-SSDSB GBD24-1.25-PSDSB
3
DESIGNER
elegant curve
designer shower seat
Size Satin SS Polished SS
18” GBD-18-1.25-SSDC GBD-18-1.25-PSDC
20” GBD-20-1.25-SSDC GBD-20-1.25-PSDC
24” GBD-24-1.25-SSDC GBD-24-1.25-PSDC
Dark Wood with SS finish
SSSW-12-SSDW
•Folds for easy storage
•Holds up to 220 pounds
universal elegance series
4
PREMIUM
exposed screw1-1/2” tubing
Size Part Number
12” GB-12-1.5-SSES
16” GB-16-1.5-SSES
18” GB-18-1.5-SSES
24” GB-24-1.5-SSES
32” GB-32-1.5-SSES
36” GB-36-1.5-SSES
premium grab barsEZGrab™’s Premium series provides the ultimate standard in safety and quality for any bathroom. Perfect for both residential and commerical use, EZGrab™ grab bars are constructed in 18-gauge stainless steel and exceed building codes and ADA criteria. The premium series is available in a variety of lengths and finishes with both concealed- or exposed-screw mounting.
Size 1-1/4” tubing 1-1/5” tubing
12” GB-12-1.25-SSCS GB12-1.5-SSCS
16” GB-16-1.25-SSCS GB16-1.5-SSCS
18” GB-18-1.25-SSCS GB18-1.5-SSCS
24” GB-24-1.25-SSCS GB24-1.5-SSCS
32” GB-32-1.25-SSCS GB32-1.5-SSCS
36” GB-36-1.25-SSCS GB36-1.5-SSCS
42” GB-42-1.25-SSCS GB42-1.5-SSCS
48” GB-48-1.25-SSCS GB48-1.5-SSCS
concealed mount
5
white finish1-1/2” tubing
Size Part Number
12” GB-12-1.5-WHSS
18” GB-18-1.5-WHSS
24” GB-24-1.5-WHSS
36” GB-36-1.5-WHSS
PREMIUMpremium grab bars
knurled finish1-1/2” tubing
Size Part Number
18” GB-18-1.5-KSS
24” GB-24-1.5-KSS
36” GB-36-1.5-KSS
42” GB-42-1.5-KSS
6
Trans-Atlantic Co.
800-523-9956www.transatlanticco.com
TM