commercial and technical tender - granicus

COMMERCIAL AND TECHNICAL TENDER

1

18 May 2011 ABB Negotiation Number: 11Q1241361 Equipment: R-MAG TM Outdoor Dead Tank Breakers Dear Customer: Attached is a quotation from ABB Inc., per your request. The opportunity to provide these items to you is greatly appreciated, and this offering is intended to meet your highest expectations. The R-MAGTM breaker is an example of ABB’s continuous effort to develop and implement the latest technology into our products. The R-MAGTM is truly the next generation in medium voltage vacuum circuit breaker technology. ABB’s proposal delivers improvement and value in four key areas: This proposal offers the ABB R-MAGTM circuit breaker utilizing magnetic actuator technology. Significantly less moving parts = Reliability

• Simple magnetic actuator with one moving part • Elimination of cams and linkages • Elimination of spring charge motors

Durable design = Longer Life

• Rated for 10,000 operations, five times the ANSI requirements • ABB Vacuum Interrupter rated for 30,000 load current operations

Low Maintenance = Reduced Operating Costs

• No maintenance required on magnetic actuator • Closing and tripping is a current limited pulse – eliminates failed trip coils • No Gas or Oil

5-year comprehensive warranty & 24 hour / 7 day a week customer service

ABB Inc. stands ready to work with you to supplement this product offering with technical application experts, spare parts, training and support services intended to reduce your total cost of ownership. We look forward to your consideration of this offering, and will be pleased to answer any questions you may have. Best Regards, Chris Hoag ABB Inc. 655 Century Point Lake Mary, Fl. 32746


2

ABB Power Technologies

Prepared for: Prepared by: CITY OF OCALA - ELECTRIC UTILITY 2100 NE 30th Ave Ocala, Florida. 34470-4875

Chris Hoag 655 Century Point Lake Mary, Fl. 32746 (407) 732 -2175 [email protected]

Customer Name: CITY OF OCALA - ELECTRIC UTILITY

Telephone:

ABB Tender ID Date Validity Date Reference Number

Contact Person:

11Q1241361 18 May 2011 08 Jul 2011

ABB is pleased to offer the following in response to your request ABB: Pricing Item Qty Product Type Net Price Each

(USD) Item Total

(USD) 10 14 MB11130SSML4KMZC01

Type : MB, Rating : 1113, Auxilliary Switch : 6, CT Bush 1-3-5 : S, CT Bush 2-4-6 : S, Trip Voltage : M, Close Voltage : L, Motor Voltage : 4, Circuit Prot. : K, Control Type : M, Panel : Z, Bushing Term. : C Type R-MAG three phase air insulated, magnetically actuated, vacuum circuit breaker. Factory assembled, wired and routine tested per ANSI C37.09. Rated Maximum Voltage: 15 kV RMS Rated Lightning Impulse Withstand Voltage (BIL): 110 kV peak Rated Continuous Current: 1200 A RMS Rated Short Circuit Interrupting Current: 20 kA RMS Sym. Lead time is 10 weeks Ex-works Factory. If drawing approval is required, lead time is 8 weeks after factory receipt of final approved drawings.

18 182 254 548.00

Grand Total Sales Price: 254 548.00 USD


3

Spare Parts: Item Qty Product Type Net Price Each

(USD) 20 1 1B09551G01

ED 2.0 Control Assembly, LV

1 500

30 1 316D804G72 Bushing (1200 A) standard creep

1 020

40 1 751010-815 Free ED2.0 Board

0 00

50 1 Free Training ABB will offer one free product training class either at the customer site or ABB plant during the first year of purchasing the R-MAG breakers.

0 00


4

Technical Data Sheet Item 10 ABB Product ID: MB11130SSML4KMZC01 Breaker Type: Type R-MAG three phase air insulated, magnetically actuated, vacuum circuit breaker. Factory assembled, wired and routine tested per ANSI C37.09. Breaker Rating: Rated Maximum Voltage: 15 kV RMS Rated Lightning Impulse Withstand Voltage (BIL): 110 kV peak Rated Continuous Current: 1200 A RMS Rated Short Circuit Interrupting Current: 20 kA RMS Sym. Auxiliary Switches: 20 deck snap action rotary switch. Normally this should provide 6 'a' and 6 'b' field adjustable contacts. Current Transformers Bushings 1-3-5: 2 sets of 1200/5 C400 Bushing Current Transformers on bushings 1-3-5.Thermal Rating Factor @ 30°C: 1.50.Full Winding Metering Class: 0.3B1.8. Current Transformers Bushings 2-4-6: 2 sets of 1200/5 C400 Bushing Current Transformers on bushings 2-4-6.Thermal Rating Factor @ 30°C: 1.50.Full Winding Metering Class: 0.3B1.8 BCT Shorting Type Terminal Blocks: Special BCT shorting type terminal blocks Special BCT Shorting Type Terminal Blocks: Penn-Union Terminal Blocks Cat # 6006-SC BCT Wiring: #12 AWG Cable. All taps wired to terminal blocks. Trip Voltage or Actuator Voltage: Trip coils are not applicable for magnetically actuated breakers. Close Voltage or Actuator Voltage: Low Voltage ED2.0 Board with an operating range of 20.4 - 52.8 VAC or 16.8 - 75 VDC. Motor Voltage or Operating Voltage: 48 VDC operating voltage. Circuit Protection: Fused knife switches provided for control circuits. Control Terminal Blocks: Special control terminal blocks


5

Special Control Terminal Blocks: Penn-Union Cat. # 6012 Control Wiring: #14 AWG (41 - .010) SIS, fungus proof wire on control circuits. Control Wiring Lugs: Insulated control wiring lugs provided. Wire Markers: Brady wire marker sleeves as required. Heaters: (2) 120 VAC, 375 Watt heaters provided; one for the low voltage compartment and one for the high voltage compartment. Thermostats: (1) Standard thermostat included. Operating Range: 70°F to 80°F Bushing: Six ANSI-70 gray Porcelain Bushings. Strike: 7.50 in. (191 mm); Creep: 17.50 in. (445 mm) 1.25 in. (32 mm) - 12 THDS copper stud bushing. Bushing Terminal: Stud to cable clamp #2-1000 MCM connectors Mounting Frame: One adjustable steel substation mounting frame with galvanized legs and two stainless steel ground pads located on the each side of the unit. Protection/Control Relay Type: Schweitzer Relay Control: User Defined Special Relay Special Control: SEL 0351A0H0X2E52X1 Panel Configuration: Special panel Control Switch: Special Control Switch Special Control Switch: GE Type 16SB1B14X2 Local/Remote Switch: No local/remote switch provided


6

Test Switches: Special Test Switch Special Test Switches: ABB FT-1 # 1586C42G36A Digital Meters: No digital meters provided Standard Dynamic Accessories: 120 VAC relay cabinet light mounted inside relay control cabinet. 120 VAC, 1 phase GFI utility outlet mounted inside the relay control cabinet. Panel mounted device engraved nameplates white on black or white on red micarta. Qty 1: GE # 16SB1EB304SSM2K Qty 3: Rochester Instrument Systems Model CCC-1B Qty 1: Durham Co. Catalog # MP 1592F Qty 1: LED GE type ET-16 Red for Close and Green for Open Qty 1: Burndy Lugs Type YAV ABB Internal Order Entry Info: CID Code: 9AAC30400486 Source Location Code: 9AAE300185


7

Clarifications

1. Section 2.04 Accessories: Latch Checking switch is not applicable to the R-MAG breaker. 2. ABB will offer one free product training class either at the customer site or ABB plant

during the first year of purchasing the R-MAG breakers. 3. ABB will offer one free ED2.0 board with the purchase of the R-MAG breaker.

Optional Services ABB can support our customers with hands-on factory authorized training for all their new installations. ABB offers a hands-on training class for up to 10 technicians on-site to train them on the proper operation and safety requirements of their new gear. The duration and content of the class can be customized based on the experience and background of your technicians. The classes are led by a highly skilled factory trained field service technician. Additional training courses are available based on customer need, such as preventive maintenance, complete refurbishment, relay coordination, etc. ABB will design the program around customer requirements. ABB offers installation and commissioning of all our products at competitive rates, utilizing our factory trained service team. We work with our customers to determine the level of support and installation schedule to fit their specific needs. When you use ABB’s service team to support your installation needs, we will waive the fee for the one day hands-on training mentioned above. ABB also offers a preventive maintenance program at factory recommended intervals to increase the reliability and service life of your new gear. Choosing an ABB preventive maintenance program may allow ABB to extend the warranty on your equipment.


8

General Terms and Conditions Prices Prices are firm for shipment quoted, and do not include federal, state, or local taxes of any kind. Payment Payment terms are Net 30 Days. ABB has a minimum domestic order value requirement of $200 USD. Warranty The equipment is warranted for a period of 60 months from date of shipment. Delivery Terms Proposed delivery terms will be Free on board. Extra Information: FOB Destination prepaid and allow. Quoted lead times are based on current production levels. Actual lead times are dependent on available production space at time of order entry and/or release to manufacturing. Lead time is as indicated on pricing summary table. For orders that require drawing approval, drawings will be submitted 2-3 weeks after factory receipt of order. The lead time is 8 weeks after factory receipt of final approved drawings. To ensure the quoted lead-time please return approval drawings to ABB within 1 weeks of receipt. Terms & Conditions Other terms and conditions are per City of Ocala Terms and Conditions Please add 2-3 weeks for drawing approvals, if required. To ensure the quoted lead-time please return approval drawings to ABB within 1-2 weeks of receipt. ABB will every effort to maintain a short delivery schedule. Cancellation Charges Cancellation of the contract will be subject to penalties depending on the time the cancellation occurs. ABB standard cancellation charges are 10% after receipt of order, 20% after drawings issued to customer for approval or if order has been engineered, 45% after release to order major material, 75% after receipt of major material, and 100% after start of fabrication. Change Notices Changes after order entry related to engineering, drawings, or parts could be subject to additional charges. We appreciate the opportunity to quote on this business. If there are any questions regarding this quotation or any other matter relating to this job please call me ABB at your convenience. Best regards, Chris Hoag

commercial and technical tender - granicus

Documents