comm operator tutorial how to send the same data at fixed interval time automatically serial port...
TRANSCRIPT
Comm Operator TutorialComm Operator Tutorial
How to send the same data at fixed How to send the same data at fixed interval time automaticallyinterval time automatically
Serial Port Toolhttp://www.serialporttool.com
Comm Operator Tutorial
TaskTask
Send the same data at fixed interval time automatically.
Sample: Send data ’254 24’ every 5 seconds.
Comm Operator Tutorial
Step 1. Open Comm OperatorStep 1. Open Comm Operator
Comm Operator Tutorial
Click to open Auto Send Rule Setting dialog
Step 2. OpenStep 2. Open Auto Send Rule SettingAuto Send Rule Setting dialog.dialog.
Comm Operator Tutorial
Click to show Select Rule Type dialog
Step 3. Select rule type and open Step 3. Select rule type and open Group Data RuleGroup Data Rule dialog.dialog.
Click to open Group Data Rule dialog
Comm Operator Tutorial
Step 4. Set condition of Step 4. Set condition of Start EventStart Event. .
Click to open Event Editor dialog
Click to return Group Data Rule dialog
Comm Operator Tutorial
Step 5. Set condition of Step 5. Set condition of Step EventStep Event..
Click to open Event Editor dialog
Click to return Group
Data Rule dialog
Comm Operator Tutorial
Step 6. Edit send data.Step 6. Edit send data.
Click to open Data Editor dialog
Click to return Group Data Rule dialog
Comm Operator Tutorial
Step 7. Finish setting for auto send rule.Step 7. Finish setting for auto send rule.
Click to return Auto Send
Rule Setting dialog
Click to finish setting and return Main GUI
Comm Operator Tutorial
Step 8. Open port. Step 8. Open port. Make sure the port connected with the device.Make sure the port connected with the device.
Click to show Open Port dialog
Click to show Select Link Type dialog
Click to select link type Click to open port
Comm Operator Tutorial
Step 9. Run the auto send rule.Step 9. Run the auto send rule.
Click to start auto send
Auto Send ResultSend ‘254 24’ every 5 seconds