combustion team supersonic combustion 6/2/20151nasa grant urc ncc nnx08ba44a faculty advisors: dr....
Post on 18-Dec-2015
220 views
TRANSCRIPT
Combustion TeamSupersonic Combustion
04/18/23 1NASA Grant URC NCC NNX08BA44A
Faculty Advisors:
Dr. GuillaumeDr. Wu Dr. BoussalisDr. LiuDr. Rad
Sara Esparza
Cesar Olmedo
Alonzo Perez
Student Researchers:
Outline
• Purpose
• Final Design
• Intake Manifold
• Testing
• New Ignition System– Three way ignition
04/18/23 NASA Grant URC NCC NNX08BA44A 2
Purpose
To achieve and sustain Mach 1.0 to 2.0 speed, induce mixing and sustain combustion for a duration
04/18/23 NASA Grant URC NCC NNX08BA44A 3
Combustion Chamber Modifications
• Combustion Chamber Shortened
• Reduced Aspect Ratio
04/18/23 NASA Grant URC NCC NNX08BA44A 5
Purpose of Intake Manifold
• Will assist in premixing concept
• Determine if injection of hydrogen will effect nozzle performance
• If no effect is determine we will introduce – Hydrogen
– Silane
04/18/23 NASA Grant URC NCC NNX08BA44A 8
Pressure Testing
• Used pressure adaptor to determine if hydrogen gas will effect nozzle performance.
• Comparing past nozzle value with intake manifold and hydrogen gas set up
• Hydrogen gas did not affect nozzle performance
04/18/23 NASA Grant URC NCC NNX08BA44A 12
Pressure Reading at Nozzle Exit
• Pressure gage reading
• Anderson’s text: Mach 2.6
• Area ratio: 2.89
05.0134
73.6
psi
psi
inlet
exhaust
P
p
New ignition System
• Three Tesla coils ( one for each spark plug)
• 13 V DC 1 Amp power source that is button operated
• All wire will be insulated and routed away from any flammable sources
04/18/23 NASA Grant URC NCC NNX08BA44A 14
New Ignition Source:Tesla Coil
• Allows for continuous spark
• Tested strong spark across air flow
• Resonant transformer circuit
04/18/23 NASA Grant URC NCC NNX08BA44A 15
Future Work
• Test hydrogen combustion at high pressure
• Acquire silane
• Finish combustion chamber
• Continue testing
04/18/23 NASA Grant URC NCC NNX08BA44A 17
Acknowledgements
Many Thanks!
• Dr. Darrell Guillaume
• Dr. Chivey Wu
• Dr. Helen Boussalis
• Combustion Team
• UAV Team• Special thanks to Solomon Yitagesu
Timeline2009 - 2010
Hypersonic Combustion Team Timeline: February 2011 - March 2011
2011
Student Name FEB FEB FEB Mar
Sara Esparza
Finish fabrication of combustion chamber Built Telsa Coil
Test Intake with Hydrogen
Find machine Shop toPolish intake surface
Fluent analysis of hydrogen and air inside intake mixture
Determine the possibility of premixing hydrogen
Cesar Olmedo
Finish fabrication of combustion chamber
Purchase Third Telsa Coil
Fabrication of new Dr Wu
Pressure Adapter
Test Intake with Hydrogen
Fabricate new intake test holder
Fluent analysis of combustion chamber
10//2009 NASA Grant URC NCC NNX08BA44A
04/18/23 NASA Grant URC NCC NNX08BA44A
Textbook References
Anderson, J. “Compressible Flow.”
Anderson, J. “Hypersonic & High Temperature Gas Dynamics”
Curran, E. T. & S. N. B. Murthy, “Scramjet Propulsion”
AIAA Educational Series,
Fogler, H.S. “Elements of Chemical Reaction Engineering” Prentice Hall International Studies. 3rd ed. 1999.
Heiser, W.H. & D. T. Pratt “Hypersonic Airbreathing Propulsion”
AIAA Educational Series.
Olfe, D. B. & V. Zakkay “Supersonic Flow, Chemical Processes, & Radiative Transfer”
Perry, R. H. & D. W. Green “Perry’s Chemical Engineers’ Handbook”
McGraw-Hill
Turns, S.R. “An Introduction to Combustion”
White, E.B. “Fluid Mechanics”.
20
04/18/23 NASA Grant URC NCC NNX08BA44A
Journal References
Allen, W., P. I. King, M. R. Gruber, C. D. Carter, K. Y Hsu, “Fuel-Air Injection Effects on Combustion in Cavity-Based Flameholders in a Supersonic Flow”. 41st AIAA Joint Propulsal. 2005-4105.
Billig, F. S. “Combustion Processes in Supersonic Flow”. Journal of Propulsion, Vol. 4, No. 3, May-June 1988
Da Riva, Ignacio, Amable Linan, & Enrique Fraga “Some Results in Supersonic Combustion” 4 th Congress, Paris, France, 64-579, Aug 1964
Esparza, S. “Supersonic Combustion” CSULA Symposium, May 2008.
Grishin, A. M. & E. E. Zelenskii, “Diffusional-Thermal Instability of the Normal Combustion of a Three-Component Gas Mixture,” Plenum Publishing Corporation. 1988.
Ilbas, M., “The Effect of Thermal Radiation and Radiation Models on Hydrogen-Hydrocarbon Combustion Modeling” International Journal of Hydrogen Energy. Vol 30, Pgs. 1113-1126. 2005.
Qin, J, W. Bao, W. Zhou, & D. Yu. “Performance Cycle Analysis of an Open Cooling Cycle for a Scramjet” IMechE, Vol. 223, Part G, 2009.
Mathur, T., M. Gruber, K. Jackson, J. Donbar, W. Donaldson, T. Jackson, F. Billig. “Supersonic Combustion Experiements with a Cavity-Based Fuel Injection”. AFRL-PR-WP-TP-2006-271. Nov 2001
McGuire, J. R., R. R. Boyce, & N. R. Mudford. Journal of Propulsion & Power, Vol. 24, No. 6, Nov-Dec 2008
Mirmirani, M., C. Wu, A. Clark, S, Choi, & B. Fidam, “Airbreathing Hypersonic Flight Vehicle Modeling and Control, Review, Challenges, and a CFD-Based Example”
Neely, A. J., I. Stotz, S. O’Byrne, R. R. Boyce, N. R. Mudford, “Flow Studies on a Hydrogen-Fueled Cavity Flame-Holder Scramjet. AIAA 2005-3358, 2005.
Tetlow, M. R. & C. J. Doolan. “Comparison of Hydrogen and Hydrocarbon-Fueld Scramjet Engines for Orbital Insertion” Journal of Spacecraft and Rockets, Vol 44., No. 2., Mar-Apr 2007.
21