combined 4.06.10
TRANSCRIPT
-
8/2/2019 Combined 4.06.10
1/17
BILL OF QUANTITIES (ELECTRICAL)
LECTURE HALL & AGRIONICS DEPARTMENT
CSIO, SECTOR - 30, CHANDIGARH
S.NO CPWD ITEM PARTICULARS OF ITEM UNIT QUANTITY RATE
CODE NO.
COOPER WIRING IN STEEL CONDUIT
1 1.3 Point wiring in steel conduit ,with modular type switch:
Wiring for light point/fan point/exhaust fan point / callbell point with 1.5 sq.mm FR
PVC insulated copper conductor single core cable in surface / recessed steel conduit,
with modular switch,Modular plate ,Suitable GI box & earthing the point with 1.50
sq.mm FR PVC insulated copper conductor single core cable etc. as required.
1.3.3 Group c Point 50 589
2 1.5 Power plug wiring in steel conduit (2X4 sq.mm)
Wiring for light /power plug with 2x4sq.mm FR PVC insulated copper conductor single
core cable in surface /recessed steel conduit along with 1 No 4 sq.mm FR PVC
insulated copper conductor single core cable for loop earthing as required. Metre 150 136
3 1.7 Circuit /submain wiring in steel conduit :
Wiring for circuit /submain wiring alongwith earth wire with the following sizes of FRPVC insulated copper conductor,single core cable in surface / recessed steel conduit as
required.
1.7.1 2 X 1.5 sq.mm + 1 X 1.5 sq.mm earth wire Metre 400 109
1.7.3 2 X 4 sq.mm + 1 X 4 sq.mm earth wire Metre 200 135
1.7.4 2 X 6 sq.mm + 1 X 6 sq.mm earth wire Metre 300 169
4 1.17 Wiring in existing conduit :
Supplying and drawing following sizes of FR PVC insulated copper coductor, single core
cable in the existing surface / recess steel / PVC conduit as required.
1.17.1 1 x 1.5 sq.mm Metre 300 19
1.17.2 2 x 1.5 sq. mm + 1 x 1.5 sq.mm Metre 600 25
1.17.3 3 x 1.5 sq.mm Metre 100 32
1.17.11 2 x 2.5 sq. mm + 1 x 2.5 sq.mm Metre 75 321.17.13 4 x 2.5 sq.mm Metre 100 53
-
8/2/2019 Combined 4.06.10
2/17
1.17.20 2 x 4 sq.mm + 1 x 4 sq.mm Metre 100 43
1.17.29 2 x 6 sq.mm + 1 x 6 sq. mm Metre 200 59
5 1.18 Telephone wiring in existing conduit:
Supplying and drawing following pair , 0.5 sq.mm FR PVC insulated copper conductor ,
unarmoured telephone cable in the existing surface / recessed PVC conduit as required.
1.18.3 4 pair Metre 700 21
STEEL / PVC CONDUIT ,METAL BOXES
6 1.20. S / F steel conduit :
Supplying and fixing of following sizes of steel conduit alongwith accessories in surface /
recess including painting in case of surface conduit , or cutting the wall and making
good the same in case of recessed conduit as required:
1.20.2 25mm Metre 700 86
1.20.3 32 mm Metre 100 105
1.20.4 40 mm Metre 50 127
7 1.21 S /F PVC conduit:
Supplying and fixing of following sizes of PVC conduit alongwith accessoriesin surface /recess including cutting the wall and making good the same incase of recessed conduit
as required:
1.21.1 20mm Metre 200 41
1.21.2 25mm Metre 650 47
1.20.3 32 mm Metre 100 105
1.20.4 40 mm Metre 50 127
SWITCHES & ACCESSORIES
8 1.24 S/ F modular type switch / socket :
Supplying and fixing following modular switch/ socket on the existing modular plate and
switch box including connections but excluding modular plate etc. as required :
1.24.1 5/ 6 amps switch Each 75 46
1.24.3 15/16 amps switch Each Q.R only 67
-
8/2/2019 Combined 4.06.10
3/17
1.24.4 3 pins 5 / 6 amps socket outlet Each Q.R only 64
1.24.5 6 pin 15 /16 amp socket outlet Each 52 101
1.24.6 Telephone socket outlet Each 46 61
1.24.7 T.v antenna socket outlet Each 1 60
9 1.25 S / F modular type electronic fan regulator:
Supplying and fixing stepped typed electronic fan regulator on the existing modular
plate switch box including connections but excluding modularplate etc. as required. Each 26 247
10 1.26 S / F modular type blanking plate :
Supplying ang fixing modular blanking plate on the existing modular plate & switch box
excluding modular plate as required. Each 20 20
11 1.27 S/ F modular boxes , base & cover plate :
Supplying and fixing following size / modules , GI box along with modularbase & cover
plate for modular switches in recess etc. as required.
1.27.1 1 or 2 module (75mm x 75mm)-Computer LAN & Telephone Each 58 88
1.27.2 4 module (125 mm x 75mm) Each 6 113
1.27.3 6 module (200 mm x 75mm) Each 1 153
1.27.4 8 module (125 mm x 125mm) Each 2 177
1.27.5 12 module (200mm x 150mm) -Computer supply points Each 44 225
12 1.31 S/ F light plug point type modular type accessories :
Supplying and fixing suitable size GI box with modular plate and cover in front
on surface or in recess, including providing and fixing 3 pin 5/ 6 amps modular
socket outlet and 5/6 amps modular switch , connection , painting etc. as
required . ( For lights plugs to be used in non- residential buildings). Each 19 160
13 1.32 S/ F power plug point modular type accessories :
Supplying and fixing suitable size GI box with modular plate and cover in front on
surface or in recess, including providing and fixing 6 pin 15/ 16 & 5/6 amps modular
socket outlet and 15/ 16 amps modular switch , connection , painting etc. as required. Each 24 214
14 1.33 S/ F ceiling rose :
-
8/2/2019 Combined 4.06.10
4/17
Supplying and fixing 3 pin , 5 amp. Ceiling rose on the existing junction box/ wooden
block including connection etc.as required. Each 15 19
15 1.35 Erection of incandescent light fittings:
Erection of wall bracket/ ceiling fittings of all sizes and shapes containing
upto two GLS lamps per fitting, complete with all acccessories including
connection etc. as required. Each 65 19
16 1.38 S/F call bell / buzzer :
Supplying and fixing call bell/ buzzer suitable for D.C. / A.C single phase ,230 volts
complete as required. Each 14 26
17 1.49 Extra down rod 20 mm dia.
Supplying and fixing extra conduit down rod of 20cm length G.I pipe , 15 mm dia, heavy
gauge including painting etc. as required . (Note : More than 5 cmlength shall be
rounded to the nearest 10 cm & 5 cm or less shall be ignored. Each 18 14
MCB,s
18 2.52 S/F 'C' series, MCB :
Supplying and fixing 5 amps to 32 amps rating, 240 volts, 'C' series, miniature circuitbreaker suitable for inductive load of following poles in the existing MCB DB complete
with connections, testing and commissioning etc. as required.
2.52.1 Single Pole Each 100 94
19 2.54 S / F DP MCB isolator :
Supplying and fixing following rating, double pole, 240 Volts , isolator in the existing
MCB DB complete with connections , testing and commissioning etc. as required.
2.54.2 63 amps Each 9 196
20 2.57 S/F TP N RCCB :
Supplying and fixing following rating , four pole ( three phase and
neutral ) 415V , residual current circuit breaker ( RCCB ), having a sensitivity
CURRENT UPTO 300 milliamps in the existing MCB DB complete with
connections, testing and commissioning etc. as required.
-
8/2/2019 Combined 4.06.10
5/17
2. 57.2 40 amps Each 2 1208
2.57.3 63 amps(A.Cs) Each 3 1426
21 2.62 S/F 20A SPN MCB Industrial Socket Outlet
Supplying and fixiing 20 amps, 240 V , SPN industrial type , socket outlet with 2pole &
earth , metal enclosed plug top along with 20amps 'c; series, SP , MCB,in sheet steel
enclosure , on surface or in recess , with chained metal cover for the socket outlet and
complete with connections, testing and commissioning etc. as required. Each 9 520
EARTHING
22 3.2 G. I earth pipe electrode with salt / charcoal:
Earthing with G .I earth pipe 4.5 m long , 40 mm dia including accessories and providing
masonary enclosure with cover plate having locking arrangement and watering pipe
etc. with charcoal and salt as required. Set 8 1971
23 3.10. S/ L 6 SWG GI in ground:
Supplying and laying 6 SWG G. I wire at 0.50 m below ground level for conductor earth
electrode including soldering etc.as required. Metre 200 16
24 8.3Supplying and fixing the following sizes of Krone telephone tag blockshoused in suitablesizes of power coated MS boxes with hinge cover complete as required.
a. 50 pair telephone tag block Each 1
b. 20 pair telephone block Each 450
25 10.5 Supply and drawing of cat 6 data outlet cable in existing raceway conduit as required. Metre 533
NS ITEMS
26 MV PANELS
Supply, installation, testing and commissioning of powder coated
compartmentlised cubicle MV Panel fabricated out of 14/16 SWG CRCA sheet
steel and suitable for operation on 415 volts, 50Hz, 3 Phase 4 wire AC supply
complete with gland plates, lifting too
27 DISTRIBUTION BOARDS Each 4 135,0001. INCOMING FEEDER
-
8/2/2019 Combined 4.06.10
6/17
a SF4 630 A, 4 pole, 50 KA with O/C, S/C Protection - with front operated rotary
rotary handle make Schneider MG / L & T - 1 No.
b
MCCB 400 A, 4 pole, 50 KA with O/C, S/C Protection - with front operated rotary
handle Make Schneider MG / L&T - 1 No.
2. OUTGOINGS FEEDER'S
a
MCCB 100 Amp./50KA, with O/C, S/C protection., 3 P&N, with front operated
rotary handle Make Schneider MG / L&T - 3 No.FSU 250 Amp. TPN with HRC fuses - 2 No.
b
MCCB 100 Amp./50KA, with O/C, S/C protection., 3 P&N, with front operated
rotary handle Make Schneider MG / L&T - 1 No.
FSU 200 Amp. TPN with HRC fuses - 1 No.
4 way TPN 63 Amp. - 2 nos.
5 A to 32 A SP MCBS - 48 nos.
3. Enclosure,Bus Bar, Wiring & Accessories :
MS Cabinet front operated compartmentalized with Base Frame fabricated from
14/16 CRCA Sheet (make TATA Steel), Powder Coated Paint after Pre-
treatment Process.Size : as approved drg., Protection : IP- 54; Cable Entry
from Top / Bottom - 1 No.
a Aluminium Busbar 600 Amp., E91 E grade Aluminium Busbar ( Current
Insulator Neoprene Rubber Gaskets and Rubber Boots - 1 No.Hardware and Accessories, Door Hinges and Locks - 1 No.
b
Aluminium Busbar 400 Amp., E91 E grade Aluminium Busbar ( Current
Density 1.0 A/Sq. mm), DMC BusBar Support Insulators, Colour Coded PVC
Heat Shrinkable Sleeves - 1 No.
Insulator Neoprene Rubber Gaskets and Rubber Boots - 1 No.
Hardware and Accessories, Door Hinges and Locks - 1 No.
28 UPS panel: Each 1 55000
Incoming - MCCB 100 amps/ 50 KA with O/C , S/C protection with front
operated rotary handle make Schneider MG/ L & T - 1 No.
Outgoing - 4 Way TPN distribution board with 1 no. TPN MCB - 63 amps
12 Nos. - SP MCB - 6 amps
29 S. D boards Each 2 65000
Incoming - MCCB 100 amps/ 50 KA with O/C , S/C protection with front
operated rotary handle make Schneider MG/ L & T - 1 No.
-
8/2/2019 Combined 4.06.10
7/17
Outgoing- 8Way TPN distribution board with 1 No. TPN MCB - 63 amps
24 No. SP MCB - 6 amps each
30 A.C panels: Each 1 55000
Supplying, installing, testing and commissioning of outdoor type feeder
pillar , metal clad suitable for 415 v , 3 phase 50 hz with suitable foundation
and arrangement for incoming/ outgoing cabling / cable termination ,
earthing , locking arrangement , insulated aluminium busbar system ,
interconnections etc.
Incoming unit - FSU 250 amps - 1 No.
Outgoing unit - 4 way T.P.D.B with 12 Nos. SP MCB - 32amps
31 Supplying ,installing, testing and commissioning in position of ceiling fan
(a) Ceiling fan of approved make .
1200 mm sweep Each 22 1500
1400 mm sweep Each 3 1500
(b) Recess mounted mirror optics lighting luminaire of size 600 x 600 mm app.
with matt finish ribbed aluminium louvers , suitable for & including 3 Nos.
CFL 's OF 36 W each. Each 53 4100
(c) Downlighter W IPRO WCP 28113 /118
1 X 13 /18 W CFL (TC- D) Each 11 1100
( d ) Supplying, installing, testing and commissioning of cubicle type L.T panelhaving TPN aluminium bus bar with minimum 400 amp capacity extensible
type TPN aluminium alloy bus bars of high conductivity , DMC/SMC bus bar
supports at required intervals complete including provision of space of
1 no. 100 amp MCCB & 1 no. 200 amp F.S.U. Each 4
(e)
Dismantling/ removal of following & stacking the same as directed by employer in
lecture hall
(i) Dismantling of main board
Board No. 1 ------- Main switches - 1 No.
Bus bar - 1 No.
T.P.D.B - 1 No.
B.D.B - 2 No.
Main switches - 1 No.
Board No. 2 ------- T.P.D.B - 1 No.
Board No. 3 ------- MCB B.D.B - 1 No.ELCB - 1 No. Job
-
8/2/2019 Combined 4.06.10
8/17
(ii) Dismantling of Ceiling fan & Tube Fittings are as under.
Ceiling Fans - 10 Nos.
Tube Fittings - 25 Nos.
Exhaust Fan - 3 Nos. Job
(iii) Dismantling of Light Point , Power Point & Light Plugs are as under.
Light Points / Fan points - 40 Nos,
Power plug - 8 Nos.
Light Plugs - 12 Nos.
Industrial plugs / A.C Points - 5 Nos. Job
(f) Dismantling / removal of following and stacking the same as directed by
employer in agrionics department.
(i) Ceiling Fan - 4 Nos.
(ii)Tube Fittings - 10 Nos.
(iii) Exhaust Fan - 2 Nos.
(iv) Light Point / Fan point - 25 Nos.
(v) Power Plugs - 3 Nos.
(vi) Light Plugs - 4 Nos. Job
32 Providing & fixing push ON/ OFF type- 400 W white colour dimmer for light
controls, over existing modular plate . Each 8 875
33 Providing & fixing M.S hanger / chains to hang the luminaires from RCC slab. Metre 50 30
34 Providing & fixing in position G.I B' class pipe , down rod of 20mm dia.
including cutting and threading etc.complete for ceiling fans. Metre 10 300
35 Supplying , installing , testing and commissioning of aluminium armoured
cable of size 3.50 core - 50 sq.mm over surface / ceiling including 2 No.s
8 SGW G.I wire complete. Metre 120 500
TOTAL :
(RUPEES)
-
8/2/2019 Combined 4.06.10
9/17
EMPLOYER ARCHITECT CONTRACTOR
-
8/2/2019 Combined 4.06.10
10/17
S.NO CPWD ITEM PARTICULARS OF ITEM
SANITARY INSTALLATIONS
32 17.7 Providing and fixing wash basin with C.I. brackets , 15mm C.P. brass pillar taps,
32mm C.P. brass waste of standard pattern , including painting of fittings
and brackets , cutting and making good the walls wherever require:
17.7.2 White vitreous china wash basin size 630 x 450mm with a single 15 mm C.P.
brass pillar tap.
33 17.8 Providing and fixing white vitreous china pedastal for wash basin completely
recessed at the back for the reception of pipes and fittings.
34 17.1 Providing and fixing stainless steel A ISI 304 (18/ 8) kitchen sink as per IS 13983
with C.I brackets and stainless steel plug 40 mm including painting of fittings
and brackets , cutting and making good the walls wherever require:
17.10.1.3 510 x 1040mm bowl depth 200mm
35 17.28 Providing and fixing PVC waste pipe for sink or wash basin including PVC
waste fittings complete.
17.28.1.2 40 mm dia.
36 17.32 Providing and fixing mirror of superior glass ( of approved quality)and of
required shape and size with plastic moulded frame of approved make andshade with 6mm thick hard board baking:
17. 32.2 Rectangular shape 453 x 357mm
37 17.35 Providing and fixing soil , waste and vent pipes:
17.35.1.1 Sand cast iron S & S pipe as per IS : 1729 .
17.35.2.1 Sand cast iron S & S pipe as per IS : 1729 .
38 17.36 Providing and filling and joints with spun yarn cement slurry and cement
mortar 1 :2 ( 1 cement :2 fine and ) in S.C.I/ C.I. PIPES:
17.36.1 75 mm dia. Pipe
17.36.2 100 mm dia. Pipe
39 17.57 Providing and fixing collar :
17.57.1 100mm
17.57.1.2 sand cast iron S&S as per I.S -1729
17.57.2 75mm
17.57.2.1 sand cast iron S&S as per I.S -1729
-
8/2/2019 Combined 4.06.10
11/17
40 17.61 Cutting chases in brick masonary walls for following diameter sand cast iron/
centrifugally cast (spun ) iron pipes and making good the same with cement
concrete 1:3:6 ( 1 cement:3 coarse sand:6 graded stone aggregate 12.5 mm
nominal size)including necessary plaster and pointing in cement mortar 1:4
(1cement : 4 coares sand ) :
17.61.3 50 mm dia.
41 17.69 Providing and fixing PTMT waste coupling for wash basin and sink , of
approved quality and color.
17. 69.2 waste coupling 38mm of 83 mm length and 77 mm breadth , weighing not less
then 60 gms.
42 17.70. Providing and fixing PTMT bottle trap for wash basin and sink.
17.70.2 Bottle trap 38mm single piece moulded with height of 270 mm , effective
length of tail pipe 260mm from the centre of the waste coupling 77mm
breadth
breadth with 25mm minimum water seal , weighing not less then 263gms.
43 17.71 Providing and fixing PTMT liquid soap container 109mm wide , 125 mm high
and 112 mm distance from wall of standard shape with bracket of the same
materials with snap fittings of approved quality and color. Weighing not less
then 105gms.
44 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215mm long , 200mm
wide with a minimum distances of 37mm from wall face with concealed
fittings arrangement of approved quality and color. Weighing not less then 88
gms
WATER SUPPLY
45 18.11 Concealed pipe including painting with anti corrosive bitumastic paint,
cutting chases and making good the wall.
18. 11. 1 15mm dia. Nominal bore
18.11.2 20mm dia. Nominal bore
-
8/2/2019 Combined 4.06.10
12/17
46 18. 13 Making connection of G.I distribution branch with G.I main of following sizes
by providing ang fixing tee, including and cutting and threading the pipe etc.
complete.
18.13.1 25 to 40 mm nominal bore
47 18.18 Providing and fixing valve ( brass)of approved quality , high or low pressure ,
with plastic floats complete:
18.18.2 20mm nominal bore
48 18.21 Providing and fixing uplaticised PVC connection pipe with brass unions:
18.21.1 30cm length
49 18.40. Painting G.I pipes and fittings with two coats of anti -corrosive
Bitumastic paint of approved quality:
18.40.1 15 mm dia.m Pipe
18.40.2 20 mm dia.m Pipe
50 18.47 Providing and fixing G.I union in existing G.I pipe line , cutting and threading
the pipe and making long screws including excavation , refilling the earth or
cutting of wall and making good the same complete wherever required:18.47.3 25mm nominal bore
51 18.53 providing and fixing C.P brass angle and valve for basin mixer and geyser
points of approved quality confirming to IS :8931 a) 15 mm nominal bore
18.53.1 15 mm nominal bore
DRAINAGE
52 19.4 Providing and fixing square -mouth S.W . Gully trap grade 'A' comlete with
C.I. grating brick masonry chamber with water tight C.I. cover with frame of
300 x 300 mm size (inside) the weight of cover to be not less then 4.50 kg and
frame to be not less than 2.70kg as per standard design:
19.4.1.1 with F.P.S bricks class destination 75
-
8/2/2019 Combined 4.06.10
13/17
53 19.7 Constructing brick masnory manhole in cement mortar 1:4 ( 1 cement :4 coarse
sand ) R.C.C. top slab with 1:2:4 mix ( 1 cement :2 coarse sand :4 graded stone
aggregate 20 mm nominal size) , foundation concrete 1:4:8 mix ( 1 cement : 4
coarse sand :8 graded stone aggregate 40 mm nominal size ) inside plastering
12 mm thick with cement mortar 1:3 ( 1cement :3 coarse sand) finished with
floating coat of neat cement and making channels in cement concrete 1:2:4
( 1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
finished with a floating coat of neat cement complete as per standard design:
19.71.1.1 With F.P.S bricks with class designation 72
54 19.21 Making connection of drain or sewer line with existing manhole including
breaking into and making good the walls , floors with cement concrete 1:2:4
mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size )
cement plastered on both sides with cement mortar 1:3 ( 1 cement : 3 coarse
sand ) finished with a floating coat of neat cement and making necessarychannels for the drain etc. complete :
19.21.1 For pipes 100 to 230 mm diameter
-
8/2/2019 Combined 4.06.10
14/17
UNIT QUANTITY RATE AMOUNT CONT.SIGN.
Each 1201.7
Each 705.9
Each 5225.15
Each 47.95
Each 465.1
Metre 451
Metre 395.45
Each 25.3
Each 29.8
Each 143.45
Each 202.7
Each
Each 107.8
-
8/2/2019 Combined 4.06.10
15/17
Metre 68.4
Each 100.2
Each 395.25
Each 164.65
Each 149
Metre 144.75
Metre 170.15
-
8/2/2019 Combined 4.06.10
16/17
Each 166.05
Each 333.25
Each 35.1
Metre 2.6
Metre 3.05
Each 180.55
Each 347.65
Each 935.15
-
8/2/2019 Combined 4.06.10
17/17
Each 5383.7
Each 164.3 `