combine sickle repairs (oem style) - agco series 2 …...series 2 thru 8 headers. also massey 9850...

202CFC Distributors, Inc. Jan. 2020 Catalog Phone 800-548-6633

K5116

K412051(25/box)

Single point section, Kondex no. 432-051 extra heavy, chrome, top serrated section. Fits 300, 500, 700, 800 series heads with bolt on sections. 2” hole spacing. 2-7/8” long x 3” wide. Big Tooth.

9318 $1.99

BDC6700B(25/box)

Double point section. Replaces Agco no. 71353125. Fits all heads with Clean Cut system. Big Tooth.

3317 $1.90

KDC55 Section bolts and nuts, for use with single point or double point sections, 5/8” long, box of 50.

8465 $9.26

KDC55114 Section bolts and nuts, for use with single point or double point sections, 1-1/4” long, box of 25.

4253 $7.50

Order No. Description Stock Retail

BU325 Double prong guard, Replaces AC no. 71341601, 71386962, and 7116504. Fits all Agco 300, 500, 700, 800, 7000, 7200, 8000, 9250 series flex heads and Challenger.

1689 $12.30

K5116 Hold down clip, fits all flex heads and early rigid heads. For use with riveted or bolted sickles.

4639 $5.20

BDC5150H High arch hold down clip for use at the drive head area. Fits all flex heads and early rigid heads.

4055 $7.20

SDC468 Steel wear plate, replaces AC no. 711766537. Fits all Gleaner heads.

3318 $1.90

BDC5066 Four prong bottom guard. Fits all Gleaner flex heads with Clean Cut system & Challenger

5496 $13.50

BDC5166 Two prong top guard. Fits all Gleaner flex heads with Clean Cut system. Replaces AC no. 71345591. Also fits Challenger.

3095 $12.90

K901118 Drive head, series 3 (late) and 500 ser. 02382 $104.00


Order No. Description Stock RetailSickle Bar Drive Head

Guards, Hold Down Clips, Wear Plates

Sections and Section Bolts

Combine Sickle Repairs (OEM Style) - Agco Series 2-8 & Challenger

Sickles - Split, without drive head - Can ship UPS

CR28785 Split sickle, 20’ with big tooth sections. 008648 $585.00



Order No. Description Stock RetailTo fit Agco OEM guards with 3” cutting systems. Series 2 thru 8 headers. Also Massey 9850 flex.

203Fax 800-528-2554 www.cfcdist.com

Combine Sickle Repairs (OEM Style) - Agco DynaFlex Draper

SC16538 2 Point guard to fit Agco Dyna Flex and Agco headers equiped with SCH cutting sys-tems.

05615 $22.00

SC16518 2 Point open top Guard for drive head area. 57729 $37.00

SC10978 Section, 7 serrations per inch. Sold and priced each, must be ordered in multiples of 25. 3316 $1.90

B00-089 New Heavy Serration Section to replace the SCH section in tough cutting conditions. 8907 $1.40

SC80503 Section bolts for SC10978 sections. 50 per pack with nuts. 08019 $13.50


Sections, Guards, and Bolts

Challenger FDH, Gleaner 9250 DynaFlex, Massey 9250 DynaFlex

Sickles - Split, without drive head - Can ship UPS

K8030D 30’ Sickle Assembly, Double Drive for Agco DynaFlex, includes RH (80344) and LH (80342) Sickle Assemblies.

005945 $660.00


057759 $770.00


000667 $880.00

80000 Connector kit for Agco DynaFlex sickles. 88919 $26.50


Double Drive Parts for Overlap

SC16519 Open top guard for center overlap on Agco DynaFlex. 52621 $35.00

SC16223 Section, Countersunk, coarse tooth for overlap on double drive heads. 4126 $2.85

SC10045 Countersunk bolt for overlap sections. 629 $0.35

SC13961 Flange nut, 6 mm for section bolts. 410 $0.20

SC13666 Overlap Strap, 2 section. 04819 $23.00

SC13665 Overlap Strap, 3 section. 04818 $23.00



K231271(25/box)

Single point section, black, “Big Tooth”, top serrated, extra heavy. Replaces Case-IH no. 596321R3 & 826720C2. Used on 820, 1010, 1020, 2010, 2020. 3” wide x 3-1/4” long, 3 holes.

5019 $1.50

B00-090 New Heavy Serration Section. Used on 820, 1010, 1020, 2010, 2020. Extra aggressive, excels in tough stem soybeans. Stays sharper longer. Made in USA.

8908 $1.40

S203549 Black, single point section (7 tpi), used on Case-IH 3020, 3152, 3162; New Holland 740CF, 880CF.

3218 $1.75

B00-087 New Heavy Serration Section. Used on CIH 3020. Extra aggressive, excels in tough stem soybeans. Stays sharper longer. Made in USA.

8907 $1.40

KDC55 Section bolts and nuts, for use with single point sections, #12 x 5/8” long, box of 50.

8465 $9.26

KDC5501 Section bolts and nuts, 1” long box of 25. 8744 $6.83

K920832 18mm long section bolt and locknut, box of 50 ea. Use with single tooth sickle sections (S203549) on Case-IH 3020, 3152, 3162; New Holland 740CF, 880CF platforms

04518 $22.00

Order No. Description Stock RetailSections and Section Bolts

Combine Sickle Repairs (OEM Style) - Case-IH

Guards

Order No. Description Stock RetailBU270 Double prong guard, fits all 820 flex heads that use guards equiped

with cross bar. Replaces IH no. 613838R3 and 187350A1.5499 $13.50

BU299 Double prong guard, fits all Case-IH 1020; 2020 s/n CBJ020001 and above. Replaces Case-IH numbers 1307299C2 and 334305A1.

4095 $12.91

BU210 Double prong guard used at drive head area (3 pcs.) on model 1020 with cross bar. Replaces Case-IH numbers 1326787C3, 483500R4, and 187346A1.

3794 $13.90

BU329 Double prong guard used at drive head area on models 820, 1010, 1020 platforms, 3 used. 2010, 2020 PIN CBJ020001 & up platforms, 4 used. New Holland models 72C, 74C PIN PNL017001 & up platforms (drive head guard, 2 used). ** Double Heat treated guard ** Replaces CNH 1326787C3; 87442329

34018 $14.90

BU289 Single prong end stub guard. 2 used on Case-IH 1020 15, 20, 25, 30 ft. platforms.. Replaces CIH no. 1338269C1.

3748 $6.75

BU215 Double prong guard. Fits Case-IH platforms 2010 and 2020 prior to s/n CBJ020000 or with s/n’s that start with HAJ. Replaces CIH part no. 700707147, 86615982. ** Double Heat treated guard **

0898 $14.00

BU358 Double prong guard with cross bar. Use at drive head on Case-IH 2010 and 2020 prior to s/n CBJ090000; also s/n’s that start with HAJ. 4 used.

33015 $14.75

BU472717DH Single Prong Guard to fit Case-IH 820 platforms, double heat treat. Replaces CIH no. 472717R2.

7678 $10.95

BU432 Triple prong guard without cross bar. Fits 2010, 2020 PIN CBJ020001 & up double drive platforms (center guard, 1 used).

74472 $34.95

Models 820, 1020, 2020


Hold Down Clips, Wear Plates

K5116 Hold down clip, fits all flex heads and early rigid heads. For use with riveted or bolted sickles.

4639 $5.20


4055 $7.20

K118499 Holddown clip for Draper heads. Replaces CIH no. 338591A1; 87407812.

5548 $6.50

SDC468 Steel wear plate for models 810, 820, 1010, 1020 (with 3” single point sections).

3318 $1.90


Guards

Order No. Description Stock RetailBU973 Double prong guard for model 3020, NH740C. Replaces CNH no.

87702973. ** Double Heat treated guard **72117 $16.90

BU974 Double prong guard. Used at drive head on Case-IH 3020; New Holland 740CF. Replaces CIH no. 87702974.

31115 $15.90

Models 3020

Models 1042, 1052, 2042, 2052, 2062, 2142, 2152, 2162.

Order No. Description Stock RetailBU4344 Top center guard, for overlap on double drive. Case-IH 2142, 2152,

2162.3799 $13.90

BU338 Bottom center guard, for overlap on double drive. Case-IH 2142, 2152, 2162.

31115 $15.90

BU344 Double Prong Guard with double heat treat. Replaces CIH no. 47687886; 118484.

22016 $14.60

BU345 Double prong guard with double heat treat. 2 to 4 used in the drive head area. Replaces CIH no. 47709127; 87422041

10015 $14.30

BU301 End guard, left hand. Double heat treat. Replaces CIH no. 47709129; 87422039.

31115 $15.90

BU302 End guard, right hand. Double heat treat. Replaces CIH no. 47709128; 87422040

31114 $15.90


Sickles for 3” OEM Cutterbars

CR19912 Split sickle, complete for 1020, 20’, single pt. Does not include head. 002348 $540.00



CR19449 Split sickle, complete for 820, 17.5’, single pt. Does not include head. 000046 $500.00


Order No. Description Stock RetailModels 820, 1020, 2020.

Models 2020, 3020.

CR19975 Split sickle assembly, 30’ Double Drive to fit CIH 2020 or NH 974. 008258 $660.00

CR53044 Split sickle assembly, 35’ Double Drive to fit CIH 2020 or NH 974. 002749 $690.00

CR54106 Split sickle assembly, 30’ to fit Single Drive 3020 with black sections (Kondex). 006358 $670.00

CR50708 Split sickle assembly, 30’ to fit Double Drive 3020 with black sections (Kondex). 006354 $670.00

CR54107 Split sickle assembly, 35’ to fit Single Drive 3020 with black sections (Kondex). 002749 $690.00

CR50710 Split sickle assembly, 35’ to fit Double Drive 3020 with black sections (Kondex). 002747 $690.00


CR53843 20’ Replacement sickle for single drive CNH 2142, 2152, 2162. 006547 $570.00





CR53913 35’ Replacement sickle for double drive CNH 2142, 2152, 2162. 008658 $710.00



Order No. Description Stock RetailModels 2142, 2152, 2162

Drive Heads

H150090 Drive head for Case-IH 1020 with a 3” cutting system. 03098 $129.00

DC848094 Drive head. Fits Case-IH 2010 with 3” cut; 2020 double drive with 3” cut PIN to CBJ021300 or PIN starting with HAJ.

92969 $98.99

C132896 LH Drive head for CNH 2142, 2152, 2162. Used on all single drive and the left hand sickle on double drive headers. Replaces CNH 87561157.

03968 $99.00

C132897 RH Drive head for double drive CNH 2142, 2152, 2162. Replaces CNH 87561158. 03967 $99.00

K711011 Splice kit for OEM CNH 2142, 2152, 2162 Sickles, 2 1/8” bolt spacing. 37529 $36.75

Order No. Description Stock RetailH150090


K412021 Single point section, top serrated, chrome, heavy small tooth. Replaces JD no. H130478 “Dura Cut”.3” wide, 3 9/32 long. 2 holes on 2 1/16” spacing.Bolt-on or rivet-on. (25/box)

3318 $1.90

K432321 Single point section, top serrated, chrome, “Big Tooth”. Replaces JD no. H136807 “Dura Lite”. 3” wide, 3 9/32” long. 2 holes on 2 1/16” spacing. Countersunk holes for bolt on sections. (25/box)

4017 $1.49

B00-088 Sickle section, 3”, Extra aggressive, excels in tough stem soybeans. Stays sharper longer. Made in USA (25/box)

2017 $1.45

KDC55 Section bolts and nuts. 5/8” long, box of 50. 8465 $9.26


KDC55114 Section bolts and nuts, 1 1/4” long box of 25. 4253 $7.50

CH163131 Twin point section to fit JD600 series cutting systems. Replaces JD no. H163131. (25/box)

6915 $2.80

B00-086 Twin point section to fit JD600 series cutting systems. Extra aggres-sive, excels in tough stem soybeans. Stays sharper longer. Made in USA. Sold by the piece in boxes of 25 only.

1618 $2.30

K8007901 Oval shoulder bolt kit for 600 series sections. 50/pkg with nuts. 30618 $22.90

K8008001 Oval shoulder bolt kit for 600 series Drive Head. 10 pcs. 36418 $20.90

Combine Sickle Repairs (OEM Style) - John DeereSections and Section Bolts Order No. Description Stock Retail

Kits for OEM Cutterbar RebuildThis kit contains all required parts to rebuild a current 3” cutting system or convert a cutterbar back to the OEM style 3” cutting system. Includes sickle, drivehead, guards, holddowns, and bolts.

Order No. Description Stock RetailKIH102015 Complete cutterbar kit for C-IH 1020, 15’. 029599 $1,199.00KIH1020175 Complete cutterbar kit for C-IH 1020, 17.5’. 0293018 $1,299.00KIH102020 Complete cutterbar kit for C-IH 1020, 20’. 0299117 $1,499.00KIH1020225 Complete cutterbar kit for C-IH 1020, 22.5’. 0295318 $1,699.00KIH102025 Complete cutterbar kit for C-IH 1020, 25’. 0299518 $1,999.00KIH102030 Complete cutterbar kit for C-IH 1020, 30’. 0295717 $2,199.00

Steel Auger Finger Order No. Description Stock RetailCF1320699 Steel auger finger for model 1020. Replaces C-IH no. 1320699C1. 0656 $7.99

P87620690 Finger guide for metal auger fingers. 5136 $4.50

*For Overlap sections and related parts see pg. 211


Guards, Hold Down Clips, Wear Plates200/900 Series Order No. Description Stock Retail

BU240 2 prong guard, heat treated. Replaces John Deere numbers H61954, H75386, H145791. Used on 200 and 900 series.

2188 $11.60

BU240D Same as BU240 only with double heat treat. Replaces John Deere number H153719.

2889 $12.60

BU340 3 prong guard, heat treated. Replaces JD no. H25603. Used on 200 and 900 series.

72315 $18.95

K5116 Steel hold down clip, fits all 200 and 900 series flex heads and early rigid heads. For use with riveted or bolted sickles.

4631 $5.20

K127801 Cast hold down clip, fits all 200 and 900 series flex heads. For use with riveted or bolted sickles. Replaces JD no. H127801.

2526 $3.60

BDC5150H Extra high arch hold down clip for use at drive head area. Fits all flex heads and early rigid headers. Used on 200 and 900 series.

4055 $7.20

SDC468 Steel wear plate, replaces JD no. E47954. Used on 200 and 900 series.

3318 $1.90

JDC468 Steel wear plate, 6.5” wide, heat treated. Fits 200, 900, 900F and 900R series. 1 used per ft. Replaces JD no. H153157.

0619 $2.29

600 Series Flex Auger and Draper

BU610 Guard for 600 series heads. Has 2 long and 1 short prong. Replaces JD H205448, H213398, H229538. ** Double Heat treated guard *

37115 $16.75

BU615 Guard for 600 series heads. Has 1 long and 2 short prong. Replaces JD H213507, AH205482, AH213055, H205447, 213400. ** Double Heat treated guard **

37115 $16.75

IB1045CB 10 mm x 45 mm Carriage bolt for mounting guards. 2405 $.60

BU620 Standard arch hold down clip, adjustable. Fits 600F, 600FD, 600R, 925D, 930D, 936D. Replaces JD No AH218547.

3148 $5.90

BU625 Adjustable hold down clip for 600 series. Replaces JD AH213058, AH218548.

3840 $6.90

BU328526 Single prong end guard. Used on John Deere platforms 630FD, 635FD, 640FD, 645FD; also 900D, 600D series. Replaces JD no. H228526.

33019 $14.75

BU326928 Hold down clip, center. 2 used on John Deere double drive platforms 630FD, 635FD, 640FD, 645FD. Replaces JD no.AH226928

48418 $21.20

BU28172 Overlap guard, left. 1 used on John Deere platforms 630FD, 635FD, 640FD, 645FD. Replaces John Deere No. HXE18172

37819 $26.75

BU29625 Overlap guard, right. 1 used on John Deere platforms 630FD, 635FD, 640FD, 645FD. Replaces John Deere No. HXE19625

37818 $26.75


BU328526

BU326928

BU29625


Drive Heads

DCAH89498 Drivehead for 200/900 series Auger headers. 03146 $59.00

DCAH220050 Drivehead for the 900 series Draper headers. Replaces JD no. AH220050.

39676 $109.90

DCAH220051 Drivehead for 600F Auger series headers. Replaces JD number AH220051. Does not work on Draper heads.

39556 $79.90

DCH157812JD Nylon sleeve for 600 series drive head. 7846 $6.95

DC231842 Drivehead with nylon sleeve for 600 series Draper Heads. Re-places JD no. AH231842.

39269 $89.90

SC02601 Knife head pin kit, greasable, 27 mm with nylon wear ring and bolts. Fits John Deere 600 series. Replaces JD DE19294; AXE24816 (sealed)

529719 $239.00

DCAH89498

DCAH220051


Kits for OEM Cutterbar Rebuild for 200 & 900 SeriesThis kit contains all required parts to rebuild a current 3” cutting system or convert a cutterbar back to the OEM style 3” cutting system. Includes drivehead, sickle, guards, wear plates, holddowns, and hardware.

Order No. Description Stock RetailKJD913 Complete cutterbar kit for JD 213 & 913 flex heads. 029959 $749.00

KJD915 Complete cutterbar kit for JD 215 & 915 flex heads. 029367 $799.00



KJD922 Complete cutterbar kit for JD 222 & 922 flex heads. 000888 $1,100.00

KJD925 Complete cutterbar kit for JD 925 flex heads. 029599 $1,199.00

KJD930 Complete cutterbar kit for JD 930 flex heads. 0291117 $1,399.00

Auger Fingers and Guides Order No. Description Stock RetailCF162662 Steel auger finger. Replaces JD no. H162662. 9846 $6.99

P205318 Poly Auger Finger for JD 200/900 Series. 7269 $8.95

P869 Poly Auger Finger for JD 600 series. 7269 $8.95

P87192 Finger guide plate cover. Replaces JD no. H87192. 3316 $1.90

P87044 Finger guide. Replaces JD no. H87044. 0419 $2.00

P179000 Finger guide for poly auger fingers on 900 series. Replaces JD H179000.

3725 $3.90

P202409 Finger guide for poly auger fingers on JD 600F and 600R platforms. Replaces JD H202409.

8238 $4.69

CF228229 Steel Auger finger for Flex Draper series. Used on models 625D, 630D, 630FD, 635D, 635FD, 640D, 640FD, 645FD. Replaces JD no. AH228229.

9968 $9.99

CF169913 Hardware kit for CF228229, includes spring clips and U-bracket.

0126 $3.00

CF228229KIT Steel Auger finger kit for Flex Draper series. includes spring clips and U-bracket. Used on models 625D, 630D, 630FD, 635D, 635FD, 640D, 640FD, 645FD.

0897 $14.00

P179000

P205318

P202409


Sickles (200/900 series) - Split, without drive head - Can ship UPS

CR19358 Split sickle, 13’ with big tooth sections. 004439 $430.00CR19359 Split sickle, 15’ with big tooth sections, for 215. 000631 $450.00CR28084 Split sickle, 15’ with big tooth sections, for 915. 000637 $450.00CR19360 Split sickle, 16’ with big tooth sections. 006738 $470.00CR19361 Split sickle, 18’ with big tooth sections. 008046 $510.00CR19362 Split sickle, 20’ with big tooth sections. 002349 $540.00CR19363 Split sickle, 22’ with big tooth sections. 004647 $580.00CR19364 Split sickle, 24’ with big tooth sections. 006949 $620.00CR28777 Split sickle, 25’ with big tooth sections. 000057 $625.00CR19365 Split sickle, 30’ with big tooth sections. 006359 $670.00


Sickles (600F series) - Split, without drive head - Can ship UPS

K8008401 Split sickle, 20’ with big tooth sections. 003431 $490.00




80094 Connector Kit for 600 series split sickle assemblies. 39729 $39.90

DCAH220051 Drivehead for 600 series. Replaces JD number AH220051. 39556 $79.90

DCH157812JD Nylon sleeve for 600 series drive head. 7846 $6.95

DCH156240 Drivehead reinforcing strap for 600 series heads. 0899 $14.00


Qty Used

Order No. Description 620f 625f 630f 635f80088.01 LH Segment 1 1 1 180089 Middle Segment 1 2 2 380090 RH Segment, 20’. 180091 RH Segment, 25’ 180092 RH Segment, 30’ 180093 RH Segment, 35’ 180094 Splice Kit 2 3 3 4


Sickles for 600FD (Draper head) - Split, without drive head - Can ship UPSOrder No. Description Stock Retail

Qty UsedOrder No. Description 30’ SD 30’ DD 35’ DD 40’ DD 45’ DD

80088.01 LH Head Section 1 1 1 1 180704.01 RH Head Section 1 1 1 180089 Middle Section 2 2 280706 Middle Section 280092 Tail Section 180709 Tail Section LH 1 180711 Tail Section RH 180715 Tail Section LH 180717 Tail Section RH 180721 Tail Section LH 180723 Tail Section RH 180815 Tail Section RH. 180094 Splice Kit 3 2 4 4 4

80696.01 Countersunk Section, 7 teeth per inch. Replaces JD no. H226352.

4348 $6.20

80701 Skid Plate, Replaces JD no. H225923. 7948 $7.1080702 Overlap strap, replaces JD no. H205581. 05425 $35.0080703 Countersunk bolt, replaces JD no. H228135. 489 $1.20

BU326928 Hold down clip, center. 2 used on John Deere double drive platforms 630FD, 635FD, 640FD, 645FD. Replaces JD no.AH226928

48418 $21.20

BU28172 Overlap guard, left. 1 used on John Deere platforms 630FD, 635FD, 640FD, 645FD. Replaces John Deere No. HXE18172

37819 $26.75

BU29625 Overlap guard, right. 1 used on John Deere platforms 630FD, 635FD, 640FD, 645FD. Replaces John Deere No. HXE19625

37818 $26.75

Overlap Area Components for Flex Drapers SicklesOrder No. Description Stock Retail

DC231842

K8008601 Knife assembly for JD 630FD, 30’ SINGLE Drive. 039559 $799.00

K6030FD Knife assembly for JD630FD, 30’ DOUBLE drive. Include both the LH (K8072701) assembly and the RH (K8072801).

578769 $905.00


008377 $984.00


572677 $1,017.00


525399 $1,247.00

DC231842 Drivehead with nylon sleeve for 600 series Draper Heads. Used on both RH and LH sickles. Replaces JD no. AH231842.

39269 $89.90

DCH157812JD Nylon sleeve for 600 series drive head. Replaces JD no. H157812. 7846 $6.95

BU326928

BU29625


Combine Sickle Repairs (OEM Style) - LexionGuards, Hold Down Clips

BU209 Guard, 2 prong without crossbar. Replaces Lexion number 7672651.

4993 $14.20

BU626 Guard, 2 prong with crossbar. Replaces Lexion 6267290. 8689 $12.40

BU282 Two prong guard without cross bar. Fits Lexion F540 s/n 44100863 & up, F750, F900; Maxflex 1050, 1200. Double heat treated.

22018 $14.60

K5116 Hold down clip. 9131 $4.56


BU209

Combine Sickle Repairs (OEM Style) - New HollandSections and Section Bolts

K231271(25/box)

Section, black, top serrated, Big Tooth. Fits 970, 971, 972, and 973 series.

5018 $1.50

BDC6700B(25/box)

Double point section. 7 serations per inch, chrome. Fits all NH cutterbars with 1-1/2” cutting system.

3317 $1.90

KDC55 Section bolts and nuts, for use with single point sections, 5/8” long, box of 50.

8465 $9.26


KDC55114 Section bolts and nuts, for use with single point sections, 1-1/4” long, box of 25.

4253 $7.50


Guards, Hold Down Clips, Wear Plates

BU215 Double prong guard with cross bar. Used on 971, 973, 71C, 73C; 72C and 74C to s/n PNL017000 and all s/n’s that start with HAJ. Replaces NH no’s. 2199191, 858778, 86521587, 86553340, 86615982.

0898 $14.00

BU299 Double prong guard without crossbar. Used on 72C and 74C with s/n PNL017001 and above. Replaces NH no. 87442324.

4097 $12.91

BU329 Double prong head guard without crossbar. 2 used per head. Used on 72C and 74C with s/n PNL017001 and above. Replaces 87442329.

34018 $14.90

BU245 Double prong guard. Used on 970, and 972 series. Replaces NH no. 65327. 5498 $13.50

K800 Hold down clip. Fits for single drive 970, 971, 972, 973, 71C, and 73C series.

3335 $4.75


4055 $7.20

DC848094 Drive head. Fits 970, 971, 972, 973, 71C, 72C, 73C; 74C double drive with 3” cut PIN to PLN018300 or PIN starting with HAJ.

05379 $105.00


BU626


Sections and Section Bolts

K232011 Section, extra heavy, chrome, 7 serrations per inch. Fits MacDon platforms 960, 962, 963, 972, 973, 974, D50, D60, D65, FD70, FD75. Replaces MacDon No 102053, 158516.

9028 $2.99

K231471 Sickle section, black, 7 serrations per inch. Fits MacDon platforms 960, 962, 963, 972, 973, 974, D50, D60, D65, FD70, FD75. Replaces MacDon No 102053, 158516.

1118 $1.59

B00-085 Section, extra heavy, chrome, 4 serrations per inch. Extra aggressive, excels in tough stem soybeans. Stays sharper longer.

8909 $1.40

KDC55 Section bolts and nuts, for use with single point sections, 5/8” long, box of 50.

8465 $9.26


K711185 Section kit for the overlap area on double drive sickles. Comes with 3 bottom countersunk sections and 4 top countersunk sections, includes hardware.

52238 $43.00


Combine Sickle Repairs (OEM Style) - MacDon

Guards, Hold Down Clips, Wear Plates Order No. Description Stock Retail

BU344 Double prong guard, double heat treat. Fits MacDon 960, 962, 963, 972, 973, 974, D40, D50, D65, FD70, FD75 Drapers; 3000, 3020, 4000, 5000, 5010, 5020, 7000, 8000, 9000, A30S Series Windrowers and Conditioners; 912, 922 Auger Header. Case-IH 1042. Replaces MacDon no. 118344; 118484.**Double Heat treated guard **

22015 $14.60

BU345 Drive head guard. Fits MacDon 960, 962, 963, 972, 973, 974, D40, D50, FD70 Drapers; 3000, 3020, 4000, 5000, 5010, 5020, 7000, 8000, 9000, series Windrowers/Conditioners; 910, 912, 920, 922, 930, 942, A30S, A30D, A40D Auger Headers; Case-IH 1042, 1052, 2042, 2052, 2062, 2142, 2152, 2162 Drapers; John Deere 140 Auger; 160 Draper; 590 Windrower; New Holland 84C, 86C Drapers; White 601, 6200 Windrower. Replaces MacDon 28014, 118345.

10014 $14.30

BU301 Guard with one long prong and one short guard, used as the first guard. Replaces MacDon 118301 and CNH 87422040.**Double Heat treated guard **

31115 $15.90

BU302 Guard with one long prong and one short guard, used as the last guard. Replaces MacDon 118302 and CNH 47709129.**Double Heat treated guard **

31117 $15.90

BU338 Bottom center guard, for overlap. MacDon D50, D60, D65, FD70, FD75. Case-IH 2142, 2152, 2162. Replaces MacDon no. 124338.

31111 $15.90

BU4344 Top center guard, for overlap. Replaces MacDon no. 124344. 3799 $13.90

IB716112MDC Special Carriage bolt for MacDon guards. 7/16” x 1 1/2”. 0403 $.80

IB716134MDC Special Carriage bolt for MacDon guards. 7/16” x 1 3/4”. 5408 $.90

IB7162MDC Special Carriage bolt for MacDon guards. 7/16” x 2”. 0508 $1.00

KH716WN 7/16” serrated flange nuts to use with guard bolts above. Package of 50. 0369 $9.00

K118499 Hold down clip. Replaces MacDon 118499 and CNH 84399893. 5548 $6.50

CF156462 Steel auger finger. Replaces MacDon 156462. 7849 $6.95


CR53913 35’ Replacement sickle for double drive D50, D60, FD70, CNH 2142, 2152, 2162. 008658 $710.00




Double Drive Sickle Assemblies

Sickle Drive HeadsOrder No. Description Stock RetailC132896 LH Drive head for MacDon draper heads. Used on all single drive and the left hand sickle on

double drive headers.03968 $99.00

C132897 RH Drive head for double drive MacDon draper heads. 03967 $99.00

K711011 Splice kit for MacDon Sickles, 2 1/8” bolt spacing. 37529 $36.75

Sickles - Split sickle with bolted sections

CR53843 20’ Replacement sickle for single drive D50, D60, FD70, CNH 2142, 2152, 2162. 006547 $570.00





Order No. Description Stock RetailSingle Drive Sickle Assemblies

Sickle Repair KitsOrder No. Description Stock Retail

K711010 Repair kit for 7000 (2 1/16” centers) series sickles. (JD, IH, NH) 08328 $34.00

K711012 Repair kit for 6000 (2” centers) series sickles. (AC,MF, HC) 17427 $35.30

K711011 Repair kit for 2 1/8” spacing. (MacDon) 37529 $36.75



Mower / Conditioner Parts

Sickle SectionsOrder No. Description Stock RetailK211022(25/box)

Section, underserrated, black, heavy section. Fits John Deere mowers and mower conditioners except 140, 160, 580, & 590. Fits all Ford mowers except model 505.

788 $1.24

K212082(25/box)

Section, underserrated, chrome, heavy section. Fits John Deere mowers and mower conditioners except 140, 160, 580, & 590. Fits all Ford mowers except model 505.

7418 $2.10

K212241(25/box)

Section, chrome, top serrated, extra heavy, “Big Tooth”.Fits JD mowers and mower conditioners except 140, 160, 580, & 590. Fits all Ford mowers except model 505.

3318 $1.90

K231271(25/box)

Section, black, Big Tooth, extra heavy, top serrated. Fits Case-IH, Ford, New Holland, New Idea, Hesston, Gehl/Owatonna.

2117 $1.60

K231271

Bolts for Sections

KDC55 Section bolts and nuts, 5/8” long, box of 50. 8465 $9.26

KDC5501 Section bolts and nuts, 1” long, box of 25. 8744 $6.83

KDC55114 Section bolts and nuts, 1-1/4” long, box of 25. 4253 $7.50

K904525 Countersunk bolt and lock nut, 5/8” long. Box of 50. 0088 $11.43

K904528 Countersunk bolt and lock nut, 1” long. Box of 50. 7958 $8.53

KBDC174 Section bolts and nuts, 1/4” x 5/8”, 50 pcs. 9874 $11.25

KBDC174N Section nuts, 1/4” self locking, 50 pcs. 5243 $6.01


K712730 Section and a half, 2 pcs. on card with rivets. 34015 $14.90


End Sections

Wear Plates and Holddown Clips

SDC468 K5116 K800 BDC5150H

SDC468 Steel wear plate, heat treated, fits all mowers and mower/conditioners. 3318 $1.90

IDC468N Nylon wear plate, fits all mowers and mower/conditioners. Reduces friction. 5016 $1.50

K800 Hold down clip, steel, fits all single drive mowers and mower/conditioners. (515-066) 3338 $4.75

K5116 Hold down clip, fits all John Deere mowers and haybines. For use with riveted or bolted sickles. (Kondex 515-116).

4634 $5.20

BDC5150H High arch hold down clip for use at the drive head area.(Kondex 515-126) 4056 $7.20



Hay/Mower GuardsUniversal Single Prong GuardOrder No. Description Stock RetailBU107 Single prong guard, universal. Fits AC, Case, Deere, IHC, New Holland, Oliver, New Idea and

other mowers with a 7/16” cutter bar. Replaces DM7003847 $6.90

John Deere

BU220 Double prong guard. Fits Deere mower models 37, 38, 39, 250, 350, 450 and mower conditioner models 480, 483, 485, 215, 215A, 780, 800, 880. Replaces Deere no. E48093 and E82559. Uses 7/16” plow bolts when mounting.

10018 $14.30

BU221 Double prong guard. Used on JD mower conditioner models 1207, 1209 and 1214. Also 1219 prior to s/n 710000. Replaces JD no’s E62000 and E52667.**Double heat treated guard **

3798 $13.90

BU254 Non-clog guard. Use with 7/16” carriage bolts. Fits John Deere mower conditioners 1207, 1209, 1214; 1217 and 1219 prior to s/n 710000; 1380, 1424. Windrower auger platforms 183, 220, 230, 240. Windrower drapers 78, 120. Mowers 350, 450.Replaces John Deere E59625, E52547, E57752, E88907.

5498 $13.50

BU906 Hold down clip with single bolt adjustment. Use with BU254 non-clog guards. Replaces 3-piece adjustable hold down. Replaces JD no’s AE57173; E88906.

3389 $11.90


Gehl Order No. Description Stock Retail

BU220 Double prong guard. Fits Gehl models 770, 880, 1070, 1090, replaces Gehl no. 072057. Uses 7/16” plow bolts when mounting.

10018 $14.30

BU270 Double prong guard. Fits Gehl MA206A, HK108, HK440. Uses 7/16” plow bolts when mounting.

5499 $13.50

BU245 Double prong guard. Fits Gehl models 2130, 2160, 2230, 2262. **Double heat treated guard **

5494 $13.50

For Stub Guards see page 217.

MacDon Order No. Description Stock Retail

BU344 Double Prong Guard. Double heat treated. Fits MacDon 3000, 3020, 4000, 5000, 5010, 5020, 7000, 8000, 9000, A30S Series Windrowers and Condition-ers; 912, 922 Auger Header. Replaces MacDon 23064, 28013, 118344, 118484. This guard uses 7/16” carriage bolts.**Double heat treated guard **

22015 $14.60

BU345 Drive head guard. Used on the same models as BU344 shown above. Replaces MacDon 28014, 118345. This guard uses 7/16” carriage bolts.

10014 $14.30


New Holland Order No. Description Stock Retail

BU215 Double prong guard. Fits all New Holland mower/conditioners, replaces NH no. 219191, 858778, and 86521587. Will interchange with BU245. This guard uses 7/16” carriage bolts.**Double heat treated guard **

0899 $14.00

For Stub Guards see the next page.

New Idea Order No. Description Stock Retail

BU280 Double prong guard. Fits New Idea mower conditioners 290 and 299; Ford 535 mower conditioners; Massey Ferguson 81 Hay Tender. Replaces New Idea 290385

51018 $14.50

BU270 Double prong guard. Fits New Idea 507, 509, 512, 514, 5107, 5109, 5112, 5114. Use 3 BU210 guards at the drive head area. This guard uses 7/16” carriage bolts.

5498 $13.50

BU472717DH Single Prong Guard to fit New Idea mowers 521, 522. Replaces NI no. H472717R2. ** Double Heat Treat **

7679 $10.95

Hesston and Case-IH Order No. Description Stock Retail

BU245 Double prong guard. Replaces Hesston no. 49239 and 700700845. Case-IH models 8300 series, 8210, 8220, 8230, 8240, 8820, 8830. **Double heat treated guard **

5498 $13.50

BU215 Double prong guard. Fits Case-IH 8300 series mower conditioners 525, 625, 8320, 8330, 8340, 8350, 8360, 8370, 8380, SC412, SC414 and SC416 windrowers 8210, 8220, 8230, 8240, 8820, 8830, 8840, DHX182, DHX212, DHX252, DHX302, DHX362, HDX121, HDX122, HDX141, HDX142, HDX161, HDX162, HDX181, HDX182, SCX100 and SMX91. Hesston mower conditioners 1109, 1110, 1120, 1130, 1150, 1160, 1170, 1260, 1265, 1270, 1275, 2270 and 2275; headers 8010, 8020, 8100, 8200, 8400, 9020, 9125, 9145.**Double heat treated guard **

0898 $14.00

BU270 Double prong guard. Case-IH 100, 110, 115, 120, 1190, 1290, 1490, 1590, 75, 210, 230, 275, 375, 4000, 5000, 5500.

5499 $13.50

BU210 Double prong guard. Fits Case-IH mower/conditioner models 170, 175, 200, 225, 816, 990, and others. Replace CIH numbers 1326787C3, 483500R4, and 187346A1.

3795 $13.90

BU472717DH Single Prong Guard, use as required on mowers 100, 110, 115, 200, 230, 1000, 1100, 1110, 1200, 1300; mower conditioners 990, 1190, 1490, 1590.

7678 $10.95


Drive Heads/Bushings/SicklesNew Holland Order No. Reference Description Stock RetailK901033 289488 Drive head, fits 474, 489. 34495 $134.90

K901034 577866 Drive head, fits 495, 1495. 02974 $99.00

K901051 134182 Drive head bushing, fits 460-469. (920-434) 02135 $39.00

K901052 254132 Drive head bushing, fits 472, 479. (920-437) 02134 $39.00

K901074 701401 Drive head bushing, fits 474, 489. (920-406) 02645 $66.00

CR19615 7’ New Holland bolted sickle assembly, NO drive head. Fits models 451, 456, 461, 467, 477, and 478.

000828 $350.00

CR24776 9’ New Holland bolted sickle assembly, NO drive head. Fits models 469, 488, 489, 492, 495, and 1469.

002137 $390.00

Tie Guards

BT260 Tie guard, used on Case-IH, Gehl, Hesston, New Holland. 51012 $14.50

BT262 Tie plate, high arch, used with BT260. 5950 $8.50

BT261 Tie plate, low arch, used with BT260. 5131 $4.50


Stub Guards

BU250 Stub guard used on Case-IH, Gehl, Hesston, Macdon, New Holland mower conditioners and windrowers. Replaces Gehl 060494; Hesston 049312; New Holland 257634; Case-IH 049312; Macdon 34974.

8689 $12.40

BU251 Lo-arch guard clip used with BU250 guard. Fits Case-IH, Gehl, Hesston, Macdon, New Holland mower conditioners and windrowers.

3430 $4.90

BU252 Hi-arch guard clip used with BU250 guard. Fits Case-IH, Gehl, Hesston, Macdon, New Holland mower conditioners and windrowers.

3048 $5.75

Order No. Description Stock RetailBU250 BU251 BU252

John Deere SickleOrder No. Description Stock RetailCR24759 9’ JD bolted sickle assembly, NO drive head. Fits models 1209 and 1219. 002137 $390.00


Bean Windrower TeethOrder No. Description Wt. Stock RetailIBTLK Bean windrower tooth, to fit 1” round tube. .5 3025 $2.90

Rubber Mounted Rake Teeth Order No. Description Stock Retail

MRMT188 Universal Rubber mounted rake tooth, to fit 1 1/2” round tube. 3025 $2.90

MRMT114 Rubber Rake Tooth, fits New Holland 259 Rolobar rakes. Also fits New Holland 216 and 258 rakes; Allen and TwinStar rakes with left hand hook. Replaces New Holland no. 65668 and 850613.

3726 $3.90

MRMT213 Rubber Rake Tooth, fits New Holland 260 Rolobar rakes. Also fits New Holland 216 rakes, Allen and TwinStar rakes with right hand hook. Replaces New Holland no. 139041, 850614.

9527 $3.70

MRMT718 Rubber Rake Tooth for John Deere & Vermeer. Fits John Deere 700, 705. Vermeer Models: R-9, R-21, R-23, R-23A, R-24, R-24A Replaces John Deere no. AE56204 Vermeer no. 2888-001

9729 3.99

MRMT012 Rubber Rake Tooth for John Deere. Fits John Deere 70, 71, 640, 650, 652, 660, 662, 670, 671, 672, 673, 896A. Replaces John Deere no. AE24953; AE47389.

7829 $4.10

MRMT052 Double Rubber Rake Tooth. Fits wheel rakes made by Circle C, Darf, Farmland, H & S, Morrill, New Idea, Pequea, John Deere & others. Replace John Deere no. 2117RH, 400341 & 491478.

6769 $9.65

Baler Pickup ToothOrder No. Description Stock RetailS12033 Pickup tooth for Agco Balers. AGCO-Hesston balers 2150, 2170, 2846, 2846A, 2856, 2856A,

2946, 2946A, 2956, 2956A, 7423, 7424, 7433, 7434, 7444. Challenger balers LB23B, LB24B, LB33B, LB34B, LB34BXD, LB44B, RB46B, RB46C, RB46CA, RB56, RB56C, RB56CA, 2250, 2270XD, 2290, 2946, 2946A, 2956, 2956A. Massey-Ferguson balers 2140, 2150, 2160, 2170, 2170XD, 2190, 2270, 2270XD, 2846, 2846A, 2856, 2856A, 2946, 2946A, 2956, 2956A. Over all length: 8-1/4”. Inside coil diameter: 1-11/16”. Inside width between legs: 2-3/8”

2726 $3.89

MRMT619 Double Baler pickup tooth. Fits Vermeer Balers: Most Baler Models. Massey Ferguson Models: 1440, 1455, 1550, and 1565. Replaces no’s Vermeer 27997-001, Massey Ferguson 1059176M1.

3849 $6.90

MRMT883 Double Baler pickup tooth. Fits New Holland Hayheads: 345, 366, 350, 355, 346, 365, 990, 340, 356. Balers: BB940S, BB960S, BB960AR, BR7070, BB940R, BB960R, 585, BB940P, BB900P, BB940AR, BR7090, BR7060. Replaces NH no. 9847572.

5958 $8.50

S26505 Baler pickup tooth. For John Deere round balers with Mega pickup 440E, 446, 447, 448, 449, 450M, 456, 457, 458, 458S, 459, 459SS, 460M, 460R, 466, 467, 468, 468S, 469, 469P, 469SS, 546, 547, 556, 557, 558, 559, 559SS, 550M, 560M, 560R, 566, 567, 568, 569, 569P, 569SS. Large square balers L331, L341. Mega pickup teeth bolt on to square tubing with angle iron on front edge.

5138 $4.50

S26505


Baler ActuatorsOrder No. Description Stock RetailGF12-1002 Actuator for JD Balers. Used on Round balers electric twine arm drive. Fits Round Baler

models 335, 375, 385, 446, 447, 448, 449, 456, 457, 458, 459, 466, 467, 468, 469, 546, 547, 556, 557, 558, 559, 565, 566, 567, 568, 572, 575, 578, 582, 592, 644, 678, 842, 852, 854, 862, 864, 960, 990.

029747 $599.00

GF12-1033 Actuator for AGCO Baler. Baler twine wrap on: AGCO, Hesston, Massey Ferguson 514, 745, 1745, 1746, 1756, 5145, 5146, 5156. Case-IH 3440, 3450, 3640, 3650, 8480.Challenger RB452, RB462, RB562. New Idea 483, 484, 485, 486; 4844, 4845, 4865 without potentiometer; 6254. Pickup on: Hesston 814. New Idea 4844, 4845, 4854, 4855, 4865.

029138 $399.00

GF12-1045 Actuator for baler electric twine wrap or net wrap. Fits New Holland balers: 640, 644, 648, 650, 654, 658, 660, 664, 678, 688, 855, BR740, BR740A, BR750, BR750A, BR770, BR770A, BR780, BR780A, BR7060, BR7070, BR7080, BR7090, BU7060*, Roll-Belt 450*.Fits Case-IH balers: RB454, RB455A*, RB464, RB554, RB564, RBX451, RBX452, RBX453, RBX461, RBX462, BX463, RBX552, RBX553, RBX561, RBX562, RBX563.*Net wrap only on BU7060, Roll-Belt 450, RB455A.

029348 $549.00

combine sickle repairs (oem style) - agco series 2 …...series 2 thru 8 headers. also massey 9850...

Documents