combination fire & smoke damper 1 1/2 hour fire / class ii ... submittal pdfs 3-24-04/prefco...
TRANSCRIPT
Application
The 5050-2 is a combination fire & smoke damper with a 1 1/2 Hour UL 555 firerating and a Class II UL555S Leakage rating. This damper utilizes a thermallyresponsive electric switch to allow for the return spring of the specified actuatorto close the damper upon elevated temperature. The damper may be installedvertically or horizontally for use in barriers requiring both fire and leakageprotection. This damper has been evaluated with bi-directional airflow, and israted to 2000 FPM and 4" static pressure in compliance with UL555 6th editionand UL555S 4th edition.
UL Listings – File #R6189
• UL555 1 1/2 Hour Fire standard• UL555S Class II @ 250°F or 350°F• <20 cfm / sq. ft. @ 4" w.g.
Model 5050-2 meets or complies with the following as a smoke, fire orcombination fire & smoke damper:
• CA State Fire Marshall Fire listing #3225-1518:100Leakage listing #3230-1518:106
• NFPA 90A & B, 92A & B
• All major building codes, including BOCA, ICBO/UBC, SBCCI & theICC International Code
Options & Accessories
❑ Dual Blade Position Indicator Switches (Switch#1)
❑ Factory Supplied Sleeves – 18 or 14 Gauge, 18" or 24" deep (units with external mount actuators provided with 18 gauge side plate if no sleeve specified)
❑ Factory supplied ‘EZ Mount’ mounting angles
❑ Single or Dual Blade stiffeners - for strength & stability of wider units in high pressure systems
Standard Sizes
See actuator section for internal mount minimums.
Standard Construction
• Frame4" Wrap around full channel frame – 16 GA Galvanized Steel
• Blades22 GA Galvanized Steel , Modified Triple-V Design
• BearingsIntegral Curl in Frame Design
• Linkage14 GA Galvanized, on Blade Type (in airstream)
• SealsCompression type silicone seals
• Heat Responsive DeviceElectric-Thermal Disc, 165°F standard, 212°, 250° or 350°F optional
• SealantUL Certified silicone caulk (sleeved units only)
Fire Rating Leakage RatingMin. Verticalor Horizontal
Max.Vertical
MaxHorizontal
1 1/2 Hour Fire Class II @ 250°F 6" x 6" 120" x 84" 144" x 90" ¹
1 1/2 Hour Fire Class II @ 350°F 6" x 6" 120" x 84" 144" x 90" ¹
*Dampers will be fabricated 1/4" under ordered dimensions unless otherwise specified.
Project:
Location:
Architect:
Engineer:
Contractor:
PO Number:
Date:
Right hand external mount actuator standardLeft hand external mount actuator shown.
Internal mount actuator optional (see page 2).
Combination Fire & Smoke Damper1 1/2 Hour Fire / Class II LeakageFor Use in Static or Dynamic Systems
Model 5050-2 SubmittalFilename: Prefco Submittal 5050-2 Rev. 27/12/14
A dim. is always width of blades
Page 1 of 2
¹ In Horizonal Applications, dampers exceeding 52”x42” must be mounted with the actuators above the rated floor
Page 2 of 2
Combination Fire & Smoke Damper1 1/2 Hour Fire / Class II LeakageFor Use in Static or Dynamic Systems
Model 5050-2 SubmittalFilename: Prefco Submittal 5050-2 Rev. 27/12/14
Specifications
Actuators will be mounted externally on the right side unless otherwise specified.Actuators available for internal or external mount (all must be factory mounted):
* Damper must be at least 13" in height for actuator to mount internally.* Unit must be 10" or greater in width for any internal actuator mounting orientation.* The factory will mount the actuator parallel to the damper, whenever height allows,
unless otherwise specified.
Actuator Model Voltage (AC)Power Consumption
Running Holding
Belimo FSNF120 120 0.23A, 18W 0.09A, 6W
Belimo FSNF24 24 24VA 24VA
Honeywell ML4115 120 0.18A, 18W 0.11A, 9W
Honeywell ML8115 24 16VA 8VA
Honeywell MS4209F, MS4309F 120 0.25A, 23W 0.13A, 7W
Honeywell MS8209F, MS8309F 24 23VA 7VA
Honeywell MS4120F 120 0.35A, 35W 0.15A, 10W
Honeywell MS8120F 24 45VA 10VA
Mounting Configurations
Actuator Mounted Parallel to the damper
Actuator Mounted perpendicular to the damper
*Available Down ToMin Height
Actuator Mounted Parallel to the dampe
Actuator Mounted perpendicular to the damper
*Available Down ToMin Height
Actuator Mounted Parallel to the damper
Actuator Mounted perpendicular to the damper
*Available Down ToMin Height
Typical Pressure Drop Per Duct Velocity
Pressure drop information is from a 24" x 24" damper. Pressure drop through a smaller damper will be higher.
Duct Velocity (FPM) 500 600 700 800 900 1000 1250 1500 1750 2000 3000 4000
Full Open .010 .013 .015 .021 .030 .035 .040 .067 .080 .100 .250 .480
Pressure Drop / Inches of Water
*Damper height must be at least 18"for actuator to mount internally.
*Damper height must be at least 18"for actuator to mount internally.
*Damper height must be at least 13"for actuator to mount internally.