2

96

Drilling and Demolition Systems

www.hilti.co.uk | 0800 886 100www.hilti.ie | 1850 287 387 2 Drilling and Demolition Systems

CombihammerTE 80-ATC AVR

ApplicationsHammer drilling in concrete, masonry and natural stone in the n22 to 150 mm diameter range (optimum)Drilling through-holes up to 150 mm diameter in concrete and nmasonryHeavy chiselling using pointed, flat, wide-flat and mortar or nbushing toolsDrilling with high torque in wood and steel n

OrderingOrder description Package Contents Item numberCombihammer TE 80-ATC 110v Complete with TE-Y (SDS-max) chuck, 4-meter supply cord, ATC Active Torque

Control, AVR Active Vibration Reduction, dust shield, cleaning cloth, safety instructions, operating instructions, packed in a durable impact-resistant plastic Hilti toolbox

00047739

Combihammer TE 80-ATC 230v Complete with TE-Y (SDS-max) chuck, 4-meter supply cord, ATC Active Torque Control, AVR Active Vibration Reduction, dust shield, cleaning cloth, safety instructions, operating instructions, packed in a durable impact-resistant plastic Hilti toolbox

00047738

Technical dataTE 80-ATC AVR

Power range 1700 WRated voltage 110 VSpeed 1 (no load) 380 rpmSpeed 2 (no load) 250 rpmDrilling Performance 144.44 cm³/min @ Ø 20 mm

181.53 cm³/min @ Ø 25 mm192.92 cm³/min @ Ø 32 mm

Contact Force 220 NSingle impact energy as per EPTA 05/2009 (100% joules)

11 J

Hammering speed (under load 100%)

4600 impacts/minute

Triaxial vibration for chiselling (concrete)

8.5 m/s²

Chuck style TE-YA-weighted emission sound pressure level acc. EN 60745

99.5 dB (A)

Dimensions (LxWxH) 554 x 125 x 312 mmWeight in accordance with EPTA-Procedure 01/2003

10.2 kg

Setting new standards in productivity and safety

AdvantagesBest performance-to-weight ratio in the 10 kg class nUnequalled 360 r.p.m. drilling speed for maximum performance nin repetitive drilling applications (standard in the class is approx. 250-280 r.p.m.)Optimised safety clutch nCentre of gravity close to the grip for excellent balance and nhandling

For drill bits see pages 115 - 119For chisels see pages 124 - 125