CombatStick

NOTES:

BEFORE WE BEGIN:

Insure the X and Y axis are centered. You will know they are centered by the location of the visual indicator on the adjustment wheel and the feel of the center detent of each of the adjustment wheels to the right and aft of the stick.

Click the Test/Calibrate button (seen above) in the Control Manager GUI.

CombatStick Calibration

Throttle Axis

CombatStick

NOTES:

Using your mouse, Trackball or Trackball Pro, click on the CH CombatStick USB.

Then, click on the Okay button…

CombatStick

NOTES:

This screen in the Control Manager GUI will allow you to Test/Calibrate your CombatStick as well as adjust your Axis Settings.

For the purpose of this calibration I will not adjust the Axis Settings.

To Calibrate your CombatStick, click on the Calibrate button…

CombatStick

NOTES:

The steps involved in calibrating the CombatStick are pretty simple and easy to follow.

You will be prompted to move and hold the Joystick:

LeftRightForward andAft…

Press Click!

CombatStick

NOTES:

CONTROL MANAGER v4.55 FOR DUMMIES

CombatStick

NOTES:

CONTROL MANAGER v4.55 FOR DUMMIES

CombatStick

NOTES:

CombatStick

NOTES:

CONTROL MANAGER v4.55 FOR DUMMIES

CombatStick

NOTES:

CombatStick

NOTES:

The Throttle Wheel is to the left of the Joystick on the top of the base.

NOTE:

To insure full travel of your throttle axis [Z] in your game of choice DO NOT move the throttle wheel to its full back, or full forward position.

CombatStick

NOTES:

CombatStick

NOTES:

Calibration of your CombatStick is now, complete. Click the Apply button to save your settings…

CombatStick

NOTES:

Check the range of your axes:

X: 0-255Y: 0-255Z: 0-255

The Raw Data may (probably will) fluctuate a small amount, typically not enough for your game to be affected.

CombatStick

NOTES:

Move the joystick all the way aft and to the right.

Move the throttle wheel all the way aft.

Check the Raw Data (should be 255 +- 10 to 15

CombatStick

NOTES:

Move the joystick all the way forward and to the left.

Move the throttle wheel all the way forward.

Check the Raw Data (should be 0 +- 10 to 15

If you are happy with the results, Click: Done