columbus jack/ · pdf filecolumbus jack/regent ... pneumatic lifting bag portable jacking...
TRANSCRIPT
Columbus JACK/Regent“The Strength of Experience”
ISO 9001:2008
2222 S. Third St. • Columbus OH 43207 USA • Ph: (614) 443-7492 • Fax: (614) 444-9337 • [email protected] • www.columbusjack.com
Columbus JACK/Regent“The Strength of Experience”
About Us -
Products -
ISO 9001:2008
2222 S. Third St. • Columbus OH 43207 USA • Ph: (614) 443-7492 • Fax: (614) 444-9337 • [email protected] • www.columbusjack.com
2 & 5 Gallon Fluid Servicing Units
Wheel & Brake Dolly
Tow BarsRhino Axle
Tripods - Fixed/Universal/Variable
Single-Acting Alligator Axle Jacks
Fly-A-Way Axle Jacks
Jack Test Cell Hand Carry Axle JacksControl Console
Pneumatic Lifting Bag
Portable Jacking System
Aircraft Tire Bead Breaker
Universal Under Axle Weighing Jacking System
Double-Acting Alligator Axle Jacks
Nitrogen & Oxygen Servicing Carts
In 2001 ColumbusJACK was acquired by Quality Products, Inc., a company with extensive experience in the manufacturing of hydraulic machinery. In 2006 Regent Manufacturing’s operations were relocated and consolidated with ColumbusJACK in Columbus, Ohio.
ColumbusJACK was founded in the early 1940s with most of its production going to the U.S. military to meet the demands of the Korean conflict. The need to consistently comply with the tough military standards created a culture of product quality that has remained with the company to this day.
Regent has served the international aviation industry since 1929. Their customer list has included most of the world’s airlines, airframe and aerospace manufacturing companies, as well as a number of military and government clients. Regent has participated in almost every major domestic and international aircraft and aerospace program since the beginning of World War II.
Today ColumbusJACK/Regent is the largest supplier of hydraulic jacks to the U.S. Defense Department. Our line of ground support equipment has grown to service all kinds of commercial, business and civilian aircraft as well. The company’s products are hard at work at airports and government installations around the world.
Tripod Recovery Jacking Systems
Columbus JACK/Regent“The Strength of Experience”
Repair & Overhaul
Parts
Test & Certification
Training
ISO 9001:2008
2222 S. Third St. • Columbus OH 43207 USA • Ph: (614) 443-7492 • Fax: (614) 444-9337 • [email protected] • www.columbusjack.com
ColumbusJACK/Regent repair services can vary from simple seal replacement to a major overhaul. We have a technical staff that understands your problems and can offer on-the-phone, online or onsite technical assistance anywhere in the world.
ColumbusJACK/Regent can repair, overhaul or refurbish ALL makes and models of jacks to a like-new condition* at any one of our repair facilities located in Ohio, California and Japan. We can also send a technician to your facility upon request.*Must have a rebuildable core.
With thousands of ColumbusJACK/Regent products being in service for decades, we fully understand the importance of reliable spare parts availability. We maintain a large inventory of replacement components that can be shipped in 48 hours or less.
Be sure to have as much information about your equipment as possible, such as: model and serial numbers, because these are very important to assure we provide you with the correct replacement parts. Contact our sales/customer service department for pricing availability.
To ensure proper operation of all aircraft hydraulic jacks, each jack should be certified on an annual basis. To assist in the matter, we offer testing and certification of jacks at our Columbus, Ohio facility, or we can send a technician to your location. For assistance call our service department.
ColumbusJACK/Regent provides the following training course, which can be scheduled upon request at our facility and/or at the customer’s facility:• Basic Hydraulics • Operation• Preventative Maintenance • Trouble-shooting• Testing & CertificationOur course provides the right mix of hands-on experience and classroom learning. Participants are taught everything needed to maintain their equipment, minimizing risk of damage and maximizing return on investment. Courses can be designed to meet specific requirements.
AFTER
BEFORE
Columbus JACK/Regent“The Strength of Experience”
Corporate Office
Quality Policy
ISO 9001:2008
2222 S. Third St. • Columbus OH 43207 USA • Ph: (614) 443-7492 • Fax: (614) 444-9337 • [email protected] • www.columbusjack.com
Manager, EngineeringJim LobnowDirect: (614) 643-2364Email: [email protected], Government SalesMaria ConleyDirect: (614) 643-2402Email: [email protected], Customer & Production SupportRon BivensDirect: (614) 643-2401Email: [email protected] AssistantHeather AbramDirect: (614) 643-2400Email: [email protected] of Repairs & RefurbishmentMatt SweenyDirect: (614) 643-2407Email: [email protected]
Repair & Overhaul CoordinatorRick PariseDirect: (614) 643-2408Email: [email protected] and Sales CoordinatorJason DrexlerDirect: (614) 643-2362Email: [email protected] & COOKaren K. HartDirect: (614) 643-2421Email: [email protected]
ColumbusJACK/Regent2222 South Third StreetColumbus, Ohio 43207 USATel: (614) 443-7492Fax: (614) 444-9337Email: [email protected]: www.columbusjack.com
For after hours emergency, please contact any of thebelow AOG cell phone numbers for assistance:
Maria Conley Cell: (614) 332-5377Ron Bivens Cell: (614) 778-4495Matt Sweeny Cell: (612) 281-5606Jim Lobnow Cell: (614) 572-4150
“ColumbusJACK/Regent designs, manufactures, services and repairs products related to aircraft ground support equipment. Our management and employees are committed to meeting and exceeding the needs and expectations of our customers. Customer satisfaction is our ultimate goal.We will accomplish this by complying with all customer, statutory, and regulatory requirements and continuous product and service improvement.”