colour video intercom with memory - … · super slim aluminium front and back panels of indoor...
TRANSCRIPT
for intercomsChoose
PAN790 SERIES
psaproducts.com.au
F I R E • S E C U R I T Y • I N T E R C O M S
COLOUR VIDEO INTERCOM WITH MEMORY INSTRUCTION MANUAL
1
2
CONTENTS
PAGE
1. Features 3
2. Kit Contents 3
3. Door Station Technical Data 3
4. Indoor Monitor Technical Data 4
5. Indoor Monitor Installation 5
6. Door Station Installation 5
7. Wiring Diagrams 7
8. Operating Instruction 11
9. Accessories 13
10. Notice 13
11. Warranty & Liability 13
3
Connection Terminal
Volume Button
Back of surface mounted camera VP-D
Connection Terminal
Volume Button
Back of flush mounted camera VP-D+
Front of surface mounted camera VP-D
Front of flush mounted camera VP-D+
Camera
Speaker
Call Button
MicrophoneNameplate
Camera
Speaker
Call Button
Microphone
Nameplate
2.Outdoor Camera Performance Data
1. IR distance more than 4M
2. Automatic gain control
3. Working temperature: -20°C~50°C
4. Resolution: CMOS more than 380 TV line CCD more than 420 TV line
5. VP-D Outdoor camera dimension: 109【W】x 158【H】x 57【D】
VP-D+ Outdoor camera dimension: 122【W】x 182【H】x 48【D】
1.Features 1. Super slim aluminium front and back panels of indoor monitor, Surface fine
processing and wiredrawing craft, with simplicity and classic design style.
2. 7’’ TFT-LED color screen,no radiation, low-power consumption and high
definition.
3. Hands-free intercome doorbell function.
4. Outdoor camera or indoor monitor selectable with electric-controlled door
release function.
5. Monitoring the outside of house.
6. Sixteen polyphonic melodies.
7. Ring volume, talking volume, chroma and brightness adjustable.
8. Enclosed 15M cable and one adapter for DIY market.
• 120° wide angle lens
• IR distance more than 2m
• Motion recording range: within 2m
• Automatic gain control
• Working temperature: -20°C~50°C
• Resolution: CCD more than 480 TV Line
• PAN790SC Outdoor camera dimension: 109(W) x 158(H) x 57(D) mm PAN790FC Outdoor camera dimension: 122(W) x 182(H) x 48 (D) mm
• Flush camera dimensions: Plate: 122(W) x 182(H) x 4(D) mm Wallbox: 92(W) x 144(H) x 38 (D) mm
1. FEATURES
• Super slim aluminum front and back panels
• 7’’ TFT-LED color screen with no radiation, low-
power consumption and high definition.
• Hands-free intercom doorbell function.
• Picture memory recording in internal memory
• Motion picture recording when SD card installed
(SD card not supplied)
• Aluminum IP44 brushed outdoor camera in surface
or flush mount option with blue backlight
• Internal paging & intercom function
• Baby monitoring function
• Mute function
• Door release function
• Monitoring function
• Sixteen polyphonic melodies.
• Ring volume, talking volume, chroma and
brightness adjustable.
3. DOOR STATION TECHNICAL DATA
2. KIT CONTENTS
• One indoor monitor • One outdoor camera
• One adapter • One bracket for indoor monitor
• One Rain Hood (surface mount kit only)
• Accessory Pack
Front of surface mountedcamera PAN790SC
Connection Terminal
Volume Button
Back of surface mounted camera VP-D
Connection Terminal
Volume Button
Back of flush mounted camera VP-D+
Front of surface mounted camera VP-D
Front of flush mounted camera VP-D+
Camera
Speaker
Call Button
MicrophoneNameplate
Camera
Speaker
Call Button
Microphone
Nameplate
2.Outdoor Camera Performance Data
1. IR distance more than 4M
2. Automatic gain control
3. Working temperature: -20°C~50°C
4. Resolution: CMOS more than 380 TV line CCD more than 420 TV line
5. VP-D Outdoor camera dimension: 109【W】x 158【H】x 57【D】
VP-D+ Outdoor camera dimension: 122【W】x 182【H】x 48【D】
1.Features 1. Super slim aluminium front and back panels of indoor monitor, Surface fine
processing and wiredrawing craft, with simplicity and classic design style.
2. 7’’ TFT-LED color screen,no radiation, low-power consumption and high
definition.
3. Hands-free intercome doorbell function.
4. Outdoor camera or indoor monitor selectable with electric-controlled door
release function.
5. Monitoring the outside of house.
6. Sixteen polyphonic melodies.
7. Ring volume, talking volume, chroma and brightness adjustable.
8. Enclosed 15M cable and one adapter for DIY market.
Back of surface mounted camera PAN790SC
Connection Terminal
Volume Button
Back of surface mounted camera VP-D
Connection Terminal
Volume Button
Back of flush mounted camera VP-D+
Front of surface mounted camera VP-D
Front of flush mounted camera VP-D+
Camera
Speaker
Call Button
MicrophoneNameplate
Camera
Speaker
Call Button
Microphone
Nameplate
2.Outdoor Camera Performance Data
1. IR distance more than 4M
2. Automatic gain control
3. Working temperature: -20°C~50°C
4. Resolution: CMOS more than 380 TV line CCD more than 420 TV line
5. VP-D Outdoor camera dimension: 109【W】x 158【H】x 57【D】
VP-D+ Outdoor camera dimension: 122【W】x 182【H】x 48【D】
1.Features 1. Super slim aluminium front and back panels of indoor monitor, Surface fine
processing and wiredrawing craft, with simplicity and classic design style.
2. 7’’ TFT-LED color screen,no radiation, low-power consumption and high
definition.
3. Hands-free intercome doorbell function.
4. Outdoor camera or indoor monitor selectable with electric-controlled door
release function.
5. Monitoring the outside of house.
6. Sixteen polyphonic melodies.
7. Ring volume, talking volume, chroma and brightness adjustable.
8. Enclosed 15M cable and one adapter for DIY market.
Front of flush mounted camera PAN790FC
Connection Terminal
Volume Button
Back of surface mounted camera VP-D
Connection Terminal
Volume Button
Back of flush mounted camera VP-D+
Front of surface mounted camera VP-D
Front of flush mounted camera VP-D+
Camera
Speaker
Call Button
MicrophoneNameplate
Camera
Speaker
Call Button
Microphone
Nameplate
2.Outdoor Camera Performance Data
1. IR distance more than 4M
2. Automatic gain control
3. Working temperature: -20°C~50°C
4. Resolution: CMOS more than 380 TV line CCD more than 420 TV line
5. VP-D Outdoor camera dimension: 109【W】x 158【H】x 57【D】
VP-D+ Outdoor camera dimension: 122【W】x 182【H】x 48【D】
1.Features 1. Super slim aluminium front and back panels of indoor monitor, Surface fine
processing and wiredrawing craft, with simplicity and classic design style.
2. 7’’ TFT-LED color screen,no radiation, low-power consumption and high
definition.
3. Hands-free intercome doorbell function.
4. Outdoor camera or indoor monitor selectable with electric-controlled door
release function.
5. Monitoring the outside of house.
6. Sixteen polyphonic melodies.
7. Ring volume, talking volume, chroma and brightness adjustable.
8. Enclosed 15M cable and one adapter for DIY market.
Back of flush mounted camera PAN790FC
4
Performance Parameter
1. Adapter input voltage: AC220-240V/50Hz
2. Adapter output voltage, output current: DC15V 1200mA
3. Talking last time: 120S±10%
4. Monitoring last time: 40S±10%
5. Working distance: 50M (5×0.5mm2)
6. Power consumption: standby <0.5W, working <10W
7. Illumination intensity: 2 luces
8. Visual angle: 120° wide-angle
9. Working temperature: -10°C~40°C
10. Relative humidity: 10-90% (RH)
11. Indoor monitor dimension: 200x125x18mm
12. Internal Memory: 60MB (80 pictures)
13. SD Card: Maximum size 16GB
PARAMETER SPECIFICATIONS UNIT
Screen Size 7.0 Inch
Resolution 800 x 480 Dot
Active Area 154.08 (H) X 85.92 (V) mm
Pixel Size 0.1926 (W) X 0.1790 (H) mm
Screen Figure Dimension 169.4 (W) X 100 (H) X 5.7 (D) mm
4. MONITOR TECHNICAL DATA3.Indoor Monitor Performance Data
1. Adapter input voltage: AC110-120V/60Hz or AC220-240V/50Hz
2. Adapter output voltage, output current: DC15V 1200mA
3. Talking last time: 120s ±10%
4. Monitoring last time: 40s ±10%25. Working distance: 50M(5×0.5mm )
6. Power consumption: standby<0.5W, working<10W
Performance Parameter
8. Visual angle: 92° wide-angle
9. Working temperature: -10°C~40°C
7. Illumination intensity: 2 luces
Mode
Intercom
Monitor
Unlock
Talk
Speaker
Mute
+ABCD12347
Connection Terminal DC Connection Terminal
Delete
TF Card
Speaker
Power Light
Contrast Adjuster
Brightness Adjuster
Talk Volume
10. Relative humidity: 10-90%(RH)
Parameter
Screen Size
Resolution
Active Area
Pixel Size
Screen Figure Dimension
Unit
Inch
Dot
mm
mm
mm169.4【W】X 100【H】X 5.7【T】
0.1926【W】X 0.1790【H】
154.08【H】X 85.92【H】
800x480
7.0
Specifications
11. Indoor monitor dimension: 200x125x21.5mm
Play
3.Indoor Monitor Performance Data
1. Adapter input voltage: AC110-120V/60Hz or AC220-240V/50Hz
2. Adapter output voltage, output current: DC15V 1200mA
3. Talking last time: 120s ±10%
4. Monitoring last time: 40s ±10%25. Working distance: 50M(5×0.5mm )
6. Power consumption: standby<0.5W, working<10W
Performance Parameter
8. Visual angle: 92° wide-angle
9. Working temperature: -10°C~40°C
7. Illumination intensity: 2 luces
Mode
Intercom
Monitor
Unlock
Talk
Speaker
Mute
+ABCD12347
Connection Terminal DC Connection Terminal
Delete
TF Card
Speaker
Power Light
Contrast Adjuster
Brightness Adjuster
Talk Volume
10. Relative humidity: 10-90%(RH)
Parameter
Screen Size
Resolution
Active Area
Pixel Size
Screen Figure Dimension
Unit
Inch
Dot
mm
mm
mm169.4【W】X 100【H】X 5.7【T】
0.1926【W】X 0.1790【H】
154.08【H】X 85.92【H】
800x480
7.0
Specifications
11. Indoor monitor dimension: 200x125x21.5mm
Play
3.Indoor Monitor Performance Data
1. Adapter input voltage: AC110-120V/60Hz or AC220-240V/50Hz
2. Adapter output voltage, output current: DC15V 1200mA
3. Talking last time: 120s ±10%
4. Monitoring last time: 40s ±10%25. Working distance: 50M(5×0.5mm )
6. Power consumption: standby<0.5W, working<10W
Performance Parameter
8. Visual angle: 92° wide-angle
9. Working temperature: -10°C~40°C
7. Illumination intensity: 2 luces
Mode
Intercom
Monitor
Unlock
Talk
Speaker
Mute
+ABCD12347
Connection Terminal DC Connection Terminal
Delete
TF Card
Speaker
Power Light
Contrast Adjuster
Brightness Adjuster
Talk Volume
10. Relative humidity: 10-90%(RH)
Parameter
Screen Size
Resolution
Active Area
Pixel Size
Screen Figure Dimension
Unit
Inch
Dot
mm
mm
mm169.4【W】X 100【H】X 5.7【T】
0.1926【W】X 0.1790【H】
154.08【H】X 85.92【H】
800x480
7.0
Specifications
11. Indoor monitor dimension: 200x125x21.5mm
Play
Connection Terminal
DC Connection Terminal
5
1. Fix the bracket of the video indoor monitor on the wall with screws (picture 1).
2. Hang the monitor on the bracket after finishing the wire connection. Plug the enclosed adapter into the sockets of AC power and the monitor (picture 2).
4.Indoor Monitor Installation
21
1. Fix the bracket of the video indoor monitor on the wall with screws (picture 1).
2. Hang the monitor on the bracket after finishing the wire connection. Plug the
enclosed adapter into the sockets of AC power and the monitor (picture 2).
1
A. Surface mounted
5.Outdoor Camera Installation
2
1. With the standard hex wrench open the screw under the front cover
(picture 1).
2. Take off the name plate for marking family name or room name, then
fix the name plate.
30.0CM
14
0~
17
0C
M
ca
ll with
in 3
0c
m
3 4 5
3. Fix the VP-D surface mounted wires according to the wiring diagram on
the back. Adjust the volume of the outdoor camera to suitable (picture 3).
Picture 1. Picture 2.
5. INDOOR MONITOR INSTALLATION
6. DOOR STATION INSTALLATION
A. SURFACE MOUNTED
1. With the hex wrench supplied, remove the screw at the bottom of the door station and remove the front cover.
2. Take off the name plate for marking family name or room name, then fix the name plate (picture 2).
3. Connect the wires following the wiring diagrams supplied on page 8, 9 or 10. Using the volume control pot at the rear of the door station, adjust the speaker volume to suit (picture 3).
4.Indoor Monitor Installation
21
1. Fix the bracket of the video indoor monitor on the wall with screws (picture 1).
2. Hang the monitor on the bracket after finishing the wire connection. Plug the
enclosed adapter into the sockets of AC power and the monitor (picture 2).
1
A. Surface mounted
5.Outdoor Camera Installation
2
1. With the standard hex wrench open the screw under the front cover
(picture 1).
2. Take off the name plate for marking family name or room name, then
fix the name plate.
30.0CM
14
0~
17
0C
M
ca
ll with
in 3
0cm
3 4 5
3. Fix the VP-D surface mounted wires according to the wiring diagram on
the back. Adjust the volume of the outdoor camera to suitable (picture 3).
Picture 1. Picture 2.
4.Indoor Monitor Installation
21
1. Fix the bracket of the video indoor monitor on the wall with screws (picture 1).
2. Hang the monitor on the bracket after finishing the wire connection. Plug the
enclosed adapter into the sockets of AC power and the monitor (picture 2).
1
A. Surface mounted
5.Outdoor Camera Installation
2
1. With the standard hex wrench open the screw under the front cover
(picture 1).
2. Take off the name plate for marking family name or room name, then
fix the name plate.
30.0CM
14
0~
17
0C
M
ca
ll with
in 3
0cm
3 4 5
3. Fix the VP-D surface mounted wires according to the wiring diagram on
the back. Adjust the volume of the outdoor camera to suitable (picture 3).
4.Indoor Monitor Installation
21
1. Fix the bracket of the video indoor monitor on the wall with screws (picture 1).
2. Hang the monitor on the bracket after finishing the wire connection. Plug the
enclosed adapter into the sockets of AC power and the monitor (picture 2).
1
A. Surface mounted
5.Outdoor Camera Installation
2
1. With the standard hex wrench open the screw under the front cover
(picture 1).
2. Take off the name plate for marking family name or room name, then
fix the name plate.
30.0CM
14
0~
17
0C
M
ca
ll with
in 3
0cm
3 4 5
3. Fix the VP-D surface mounted wires according to the wiring diagram on
the back. Adjust the volume of the outdoor camera to suitable (picture 3).
Picture 3.
4.Indoor Monitor Installation
21
1. Fix the bracket of the video indoor monitor on the wall with screws (picture 1).
2. Hang the monitor on the bracket after finishing the wire connection. Plug the
enclosed adapter into the sockets of AC power and the monitor (picture 2).
1
A. Surface mounted
5.Outdoor Camera Installation
2
1. With the standard hex wrench open the screw under the front cover
(picture 1).
2. Take off the name plate for marking family name or room name, then
fix the name plate.
30.0CM
14
0~
17
0C
M
ca
ll with
in 3
0cm
3 4 5
3. Fix the VP-D surface mounted wires according to the wiring diagram on
the back. Adjust the volume of the outdoor camera to suitable (picture 3).
6
6. DOOR STATION INSTALLATION
A. SURFACE MOUNTED
4. Install the door station at approximately 150-170cm high from floor level. Do not install the camera facing towards direct sunlight or rain.
5. Fix the outdoor camera on the wall and then fix the screws (picture 5).
6. Reattach the front cover and insert the screw with the hex wrench supplied (picture 6).
Picture 4. Picture 5.
4.Indoor Monitor Installation
21
1. Fix the bracket of the video indoor monitor on the wall with screws (picture 1).
2. Hang the monitor on the bracket after finishing the wire connection. Plug the
enclosed adapter into the sockets of AC power and the monitor (picture 2).
1
A. Surface mounted
5.Outdoor Camera Installation
2
1. With the standard hex wrench open the screw under the front cover
(picture 1).
2. Take off the name plate for marking family name or room name, then
fix the name plate.
30.0CM
14
0~
17
0C
M
ca
ll with
in 3
0cm
3 4 5
3. Fix the VP-D surface mounted wires according to the wiring diagram on
the back. Adjust the volume of the outdoor camera to suitable (picture 3).
4.Indoor Monitor Installation
21
1. Fix the bracket of the video indoor monitor on the wall with screws (picture 1).
2. Hang the monitor on the bracket after finishing the wire connection. Plug the
enclosed adapter into the sockets of AC power and the monitor (picture 2).
1
A. Surface mounted
5.Outdoor Camera Installation
2
1. With the standard hex wrench open the screw under the front cover
(picture 1).
2. Take off the name plate for marking family name or room name, then
fix the name plate.
30.0CM
14
0~
17
0C
M
ca
ll with
in 3
0cm
3 4 5
3. Fix the VP-D surface mounted wires according to the wiring diagram on
the back. Adjust the volume of the outdoor camera to suitable (picture 3).
Picture 6.
1 2
B. Flush mounted
6
6. Cover the top of the surface cover with buckle, then with the standard
hex wrench fix the screws (picture 6).
4. Install the outdoor camera at a height of 1.4m-1.7m, and make sure it
avoiding the direct sunshine or rain .
5. Fix the outdoor camera on the wall and then fix the screws (picture 5).
2. Take off the name plate for marking family name or room name, then fix
the name plate.
1. With the standard hex wrench open the screw of the front cover (picture 1).
43
30.0CM
14
0~
17
0C
M
ca
ll with
in 3
0cm
5
3. At a height of 1.4m-1.7m,dig a 93 x144.7 x38mm hole in the wall, and make
sure it avoiding the direct sunshine or rain (Picture4).
150-
170c
m
7
6. DOOR STATION INSTALLATION
B. FLUSH MOUNTED
1. With the standard hex wrench open the screw of the front cover (picture 1).
2. Take off the name plate for marking family name or room name, then fix the name plate.
3. At a height of 150-170cm, create a hole of 93W x 144.5H x 38D mm in size to fit the wall box in the wall. Ensure to avoid facing the door station towards direct sunlight or rain (picture 4)
4. Fix the flush mounted wall box in the hole, then put the outdoor camera in the flush mounted bracket.
Picture 1. Picture 2.
1 2
B. Flush mounted
6
6. Cover the top of the surface cover with buckle, then with the standard
hex wrench fix the screws (picture 6).
4. Install the outdoor camera at a height of 1.4m-1.7m, and make sure it
avoiding the direct sunshine or rain .
5. Fix the outdoor camera on the wall and then fix the screws (picture 5).
2. Take off the name plate for marking family name or room name, then fix
the name plate.
1. With the standard hex wrench open the screw of the front cover (picture 1).
43
30.0CM
14
0~
17
0C
M
ca
ll with
in 3
0c
m
5
3. At a height of 1.4m-1.7m,dig a 93 x144.7 x38mm hole in the wall, and make
sure it avoiding the direct sunshine or rain (Picture4).
1 2
B. Flush mounted
6
6. Cover the top of the surface cover with buckle, then with the standard
hex wrench fix the screws (picture 6).
4. Install the outdoor camera at a height of 1.4m-1.7m, and make sure it
avoiding the direct sunshine or rain .
5. Fix the outdoor camera on the wall and then fix the screws (picture 5).
2. Take off the name plate for marking family name or room name, then fix
the name plate.
1. With the standard hex wrench open the screw of the front cover (picture 1).
43
30.0CM
14
0~
17
0C
M
ca
ll with
in 3
0c
m
5
3. At a height of 1.4m-1.7m,dig a 93 x144.7 x38mm hole in the wall, and make
sure it avoiding the direct sunshine or rain (Picture4).
Picture 3.
1 2
B. Flush mounted
6
6. Cover the top of the surface cover with buckle, then with the standard
hex wrench fix the screws (picture 6).
4. Install the outdoor camera at a height of 1.4m-1.7m, and make sure it
avoiding the direct sunshine or rain .
5. Fix the outdoor camera on the wall and then fix the screws (picture 5).
2. Take off the name plate for marking family name or room name, then fix
the name plate.
1. With the standard hex wrench open the screw of the front cover (picture 1).
43
30.0CM
14
0~
17
0C
M
ca
ll with
in 3
0c
m
5
3. At a height of 1.4m-1.7m,dig a 93 x144.7 x38mm hole in the wall, and make
sure it avoiding the direct sunshine or rain (Picture4).
Picture 4. Picture 5.
1 2
B. Flush mounted
6
6. Cover the top of the surface cover with buckle, then with the standard
hex wrench fix the screws (picture 6).
4. Install the outdoor camera at a height of 1.4m-1.7m, and make sure it
avoiding the direct sunshine or rain .
5. Fix the outdoor camera on the wall and then fix the screws (picture 5).
2. Take off the name plate for marking family name or room name, then fix
the name plate.
1. With the standard hex wrench open the screw of the front cover (picture 1).
43
30.0CM
14
0~
17
0C
M
ca
ll with
in 3
0c
m
5
3. At a height of 1.4m-1.7m,dig a 93 x144.7 x38mm hole in the wall, and make
sure it avoiding the direct sunshine or rain (Picture4).
1 2
B. Flush mounted
6
6. Cover the top of the surface cover with buckle, then with the standard
hex wrench fix the screws (picture 6).
4. Install the outdoor camera at a height of 1.4m-1.7m, and make sure it
avoiding the direct sunshine or rain .
5. Fix the outdoor camera on the wall and then fix the screws (picture 5).
2. Take off the name plate for marking family name or room name, then fix
the name plate.
1. With the standard hex wrench open the screw of the front cover (picture 1).
43
30.0CM
14
0~
17
0C
M
ca
ll with
in 3
0c
m
5
3. At a height of 1.4m-1.7m,dig a 93 x144.7 x38mm hole in the wall, and make
sure it avoiding the direct sunshine or rain (Picture4).
Picture 6.
+ABCD12347
1. The 1,2,3,4,7connection terminals of the indoor monitor connect to the 1, 2,
3,4,7 connection terminals of the outdoor camera accordingly.
2. The 5,6 connection terminals of the outdoor camera connect to the
electronic lock.
Outdoor Camera
Lock
Indoor Monitor
1.Audio Wire 2.Ground Wire 3.Video Wire 4.Power Wire 7.SD wire
6.Notices of Wiring DiagramThe video door phone kit includes 15 meters wire. If wanting extension to 15-
250 meters, please use the 5×0. 5mm wire; If wanting extension to 50-100 meters, 2please use the 5×0.75mm wire.
bracket (Picture 5、6).
6
4. Fix the flush mounted bracket of the outdoor camera in the hole on wall
by tightening screws, then put the outdoor camera in the flush mounted
1. VP-702DSD / VP-702D+SD Wiring Diagram
150-
170c
m
8
0-50m = CAT-5> 51-100m = RG59 Coaxial + 4 Core 14/020
CAT 5 TERMINATION CONFIGURATION:From Door to Monitor
1. Blue2. Blue/White, Brown/White, Green/White, Orange/White3. Green4. Brown7. Orange
PAN790 WIRING - ONE DOOR to ONE MONITOR
RECOMMENDED CABLE (based on distance between door & last monitor):
TERMINAL LEGEND:1 (A) Audio 4 (D) Power 15V DC 7 Picture Memory2 (B) Ground 5 Lock +12V DC3 (C) Video 6 Lock Ground
Outdoor Camera
Lock
+
Indoor Monitor
ABCD12347
9
Lock
+ABCD12347
+ABCD12347
+ABCD12347
0-50m = CAT-551-100m = RG59 Coaxial + 4 Core 14/020
CAT 5 TERMINATION CONFIGURATION:From Door to 1st monitor
1. Blue2. Blue/White, Brown/White, Green/White, Orange/White3. Green4. Brown7. Orange
PAN790 WIRING - ONE DOOR to THREE MONITORS
From monitor to monitor.
A. BlueB. Blue/White, Brown/White, Green/WhiteC. GreenD. Brown
RECOMMENDED CABLE (based on distance between door & last monitor):
TERMINAL LEGEND:1 (A) Audio 4 (D) Power 15V DC 7 Picture Memory2 (B) Ground 5 Lock +12V DC3 (C) Video 6 Lock Ground
Indoor Monitor A
Indoor Monitor B Indoor Monitor C
Outdoor Camera
10
0-50m = CAT-5 + FIG851-100m = RG59 Coaxial + 4 Core 14/020
CAT 5 TERMINATION CONFIGURATION:From Door to Controller
1. Blue2. Blue/White, Brown/White, Green/White, Orange/White3. Green4. Brown7. Orange
PAN790 WIRING - THREE DOORS to FOUR MONITORS
From Controller to Monitor.
A. BlueB. Blue/White, Brown/White, Green/WhiteC. GreenD. Brown+ Fig 8- Fig 8 Trace
RECOMMENDED CABLE (based on distance between door & last monitor):
TERMINAL LEGEND:1 (A) Audio 4 (D) Power 15V DC 7 Picture Memory2 (B) Ground 5 Lock +12V DC3 (C) Video 6 Lock Ground
Indoor Monitor A Indoor Monitor B Indoor Monitor C Indoor Monitor D
12347 12347 12347
+- DCBA +- +- +-
Lock
Outdoor Camera A Outdoor Camera B Outdoor Camera C
Lock Lock
13.5V DC
+ABCD12347 +ABCD12347 +ABCD12347 +ABCD12347
DCBA DCBA DCBA
VP-716KZ
11
8. OPERATING INSTRUCTION
MODE BUTTONPressing the MODE button allows the user to scroll through options.1st Press = System Info2nd Press = Internal Memory View3rd Press = SD Card Memory View4th Press = Time & Date SetupFurther presses will scroll though time & date setup.
SETTING TIME & DATEPress the MODE button 4 times to enter time setting mode.To change the numbers, press the BROWSE button.Use the MODE button to scroll to next section and BROWSE button to change the numbers.Once completed, press the MONITOR button to return to standby.
CALLWhen the doorbell is pressed, the internal monitors will chime and the image of the entry should appear.Press the TALK button to talk to the visitor at the entry.Press UNLOCK to release the door strikeTo turn off the monitor, press TALK button again
PICTURE MEMORYMonitors are able to record in 2 ways:1) Taking a picture when doorbell is pressed In this mode, pictures are stored in the internal memory. Approximately 80 pictures can be saved in the internal memory. Once it has reached full capacity, the oldest picture will be overwritten. To manually delete, press the DELETE button to delete a picture or press & hold the delete button for 3sec
to remove ALL the pictures Internal memory pictures CANNOT be exported to PC.
2) Recording picture automatically when there is movement in front of the door camera In this mode, the motion recording is stored in the micro SD card. Approximately 10,000 pictures can be stored on a 1GB card. The max size supported is 16GB. Once it has reached full capacity, the oldest picture will be overwritten. You can only delete ALL pictures from the micro SD card. To do this, press & hold the delete button for
3sec to remove ALL the pictures. To export SD Card memory, insert the SD card into the PC via card reader or adaptor (not supplied).
Open the video player software on the SD Card and select the .tag file to review the recordings. Individual snapshot .jpeg files can be saved by double clicking on the selected frame.
MEMORY PLAYBACKTo view recorded images, press the MODE button to the selected memory you wish to view (internal or SD Card). Use the BROWSE button to scroll through images
12
8. OPERATING INSTRUCTION
Press MONITOR to return to standby
MONITORINGTo activate the door camera to monitor outside, press the MONITOR button.To talk, press the TALK button.To deactivate, press the MONITOR button again.
INTERNAL INTERCOMWhen more than 1 monitor is installed, to call other monitors press the INTERCOM button.Other monitors will ring.To communicate, the receiver must press the TALK button.Press the TALK button to return to standby after conversation.
GENERAL PAGINGWhen more than 1 monitor is installed, there is a general paging feature.To do this press & hold the INTERCOM button for 4 seconds.An acknowledgment tone can be heard and a flashing blue light will be activated on the right side of monitor.All audio channels are now open.Press TALK to return to standby.
BABY MONITORINGTo enter baby monitoring mode, go to the monitor you wish to activate.Press Internal Intercom button to generate a call.Go to monitor you wish to monitor from.Press and hold the TALK button for 4 seconds.An acknowledgement beep can be heard.One way audio is now activated between 2 monitors. Press TALK to return to standby.
MUTETo mute a monitor, go to the monitor you wish to mute.Press and hold the UNLOCK button for 4 seconds.An acknowledgement beep can be heard and a blue light will be activated on the right side of monitor.When door bell is pressed, only the picture will activate without any call tones.To unmute, press & hold the UNLOCK button for 4 seconds until an acknowledgement beep is heard.
RINGTONE ADJUSTMENTPress and hold the MONITOR button for 4 seconds.An acknowledgement beep can be heard.Press the MONITOR button again to scroll through ringtones.Press the TALK button to adjust ring volume.Press UNLOCK button to confirm.
13
9. ACCESSORIES
Surface Door Camera – PAN790SC
Flush Door Camera – PAN790FC
Additional Monitor - PAN790M
Central Controller – PAN790DC
Electric Strike – GEMGK310
10. NOTICES
1. Do not install the indoor monitor in areas of high temperature or high humidity.
2. Do not install the indoor monitor directly next to or behind power points, light switches or near TV’s.
3. Always maintain 50mm separation between intercom cable and 240V cable.
4. Do not touch the monitor screen with wet hands.
5. Use only soft cloth to clean the monitor screen or camera in order to get a clear image. Please do not use dish washing liquid, cleaning chemicals or corrosive liquid to clean.
6. Please avoid throwing or hitting the units.
7. Do not install the door stations directly facing the sun. If installed in such a manner, a white picture may appear.
8. Wireless communication equipment may cause the image to be fuzzy due to interference from radio waves.
14
1. PSA Products Pty Ltd (ABN: 99 076 468 703) of 17 Millicent Street, Burwood 3125 Victoria, Australia
warrants this product for a period of two years from the date of purchase, as reflected on the Authorised
Reseller’s or Distributor’s invoice / receipt provided to you. PSA Products Pty Ltd will repair or replace the
product (at the option of PSA Products) due to any manufacturing defect, at the cost of PSA Products Pty
Ltd (excluding any labour costs relating to removal or re-installation of product, and transport costs).
2. This warranty shall not apply to the product if it has been damaged, modified, abused or altered after the
date of purchase, or if it fails to operate due to improper maintenance.
3. To the extent permitted by law, the liability of PSA Products Pty Ltd arising from the sale or under the
terms of this limited warranty shall not in any case exceed the cost of replacement and subject to this
clause. In no case shall PSA Products Pty Ltd be liable for consequential loss or damages resulting from the
failure of the product or breach of this, or: Any other warranty, express or implied, loss or damage caused
by failure to abide by the instructions supplied in the leaflets.
4. To the extent permitted by law, PSA Products Pty Ltd., makes no warranty, expressed or implied, written
or oral, including that of merchantability or fitness for any particular purpose, with respect to the
consumer replaceable battery if any. A product with non-serviceable built-in battery is covered under
warranty of the product as per point 1.
5. This warranty is provided in addition to other rights and remedies you have under law: Our goods come
with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure. What constitutes a major failure is set out in
the Australian Consumer Law.
6. To make a claim under warranty, take the product (with a proof of purchase) to the store where you
purchased the product or contact PSA Products Pty Ltd. Phone (03) 9888 9889. or Email: enquiry@
psaproducts.com.au with details, proof of purchase or expense claim in writing.
11. WARRANTY & LIABILITY
15
psaproducts.com.au1300 772 776
for intercomsChoose
F I R E • S E C U R I T Y • I N T E R C O M S