Colors and Finishes

M E T A L W A L L & R O O F S Y S T E M S

www.morincorp.com3/16

Morin East685 Middle StreetBristol, CT 060101-800-640-9501

Morin West10707 Commerce WayFontana, CA 923371-800-700-6140

Morin South1975 Eidson DriveDeland, FL 327241-800-640-9501

www.morincorp.com

Morin supplies warranties covering finish integrity, material or weather tightness performance. Items not made by Morin such as sealants, fiberglass panels and fasteners carry no warranty, either expressed or implied. Please refer to the appropriate manufacturer and the manufacturer’s product data sheets. No metal panel manufacturer can guarantee the total elimination of oil canning, specific to light-gauge, cold-formed metal. Be assured that we at Morin take every precaution during the selection of material and production of the metal panels to effectively minimize the effects of oil canning. Other factors contributing to oil canning can be improper installation and misalignment of the structural steel, even within AISC standards. Oil canning from these conditions is not sufficient cause for automatic rejection of the material.The information contained in this brochure and in the accompanying typical detail sheets is thought to be reliable and correct, but is subject to change without notice. Morin assumes no responsibility for engineering or design of any structure or substructure, whether such structure contains products manufactured by Morin or not. Typical details are meant to show the products of the seller in a manner that is representative of the way in which they are installed. It is the responsibility of the buyer or his or her architect or engineer to verify that any product is suitable for the conditions and use intended and that the products are compatible with any other material.

Morin proudly partners with Valspar® paints to provide Valspar’s cool color palette – high-performance,

sustainable finishes with many green benefits. When applied to a roof, these select hues are able to

contribute to several LEED credits, including Sustainable Sites (SS) Credit: Heat Island Reduction. These

hues are intended to reduce heat islands (thermal gradient differences between developed and undevel-

oped areas) to minimize impact on microclimates and human and wildlife habitat. As required by LEED’s

Sustainable Sites (SS) Credit, Valspar’s cool color palette is ENERGY STAR compliant, specifying highly

reflective and high-emissivity roofing (emissivity of at least 0.9 when tested in accordance with ASTM

408) for a minimum of 75% of the roof surface.

Spec data sheets for all finishes are available from your Morin sales representative.

©2014 Joseph St.Pierre

©Tim Griffith

© Eric Rorer

©Mark Herboth Photography

Color + Durability.Morin high-performance coatings combine virtually unlimited color selection and full-strength composition for long-life protection, color and gloss retention — plus field-proven weather resistance — the perfect finish for any panel.

ENERGY STAR COMPLIANT

FLUROPON SR COATINGS BY VALSPAR®

STANDARD COLORS

REGAL WHITESR: 0.70 E: 0.86 SRI: 85

SANDSTONESR: 0.61 E: 0.85 SRI: 72

CHROMIUM GRAYSR: 0.48 E: 0.85 SRI: 54

PARCHMENTSR: 0.53 E: 0.85 SRI: 61

DARK BRONZESR: 0.27 E: 0.85 SRI: 26

PATINA GREENSR: 0.41 E: 0.84 SRI: 44

IMPERIAL WHITE *SR: 0.62 E: 0.86 SRI: 74

ASCOT WHITESR: 0.69 E: 0.85 SRI: 83

DOVE GRAYSR: 0.47 E: 0.86 SRI: 53

SURREY BEIGESR: 0.48 E: 0.86 SRI: 54

ANTIQUE BRONZESR: 0.43 E: 0.86 SRI: 48

REDWOODSR: 0.38 E: 0.86 SRI: 41

EVERGREENSR: 0.26 E: 0.85 SRI: 24

BLUE GRAYSR: 0.27 E: 0.85 SRI: 26

BONE WHITESR: 0.69 E: 0.84 SRI: 83

ZINC GRAYSR: 0.35 E: 0.86 SRI: 37

SIERRA TANSR: 0.38 E: 0.85 SRI: 40

SPARTAN BRONZESR: 0.31 E: 0.85 SRI: 31

COLONIAL REDSR: 0.32 E: 0.86 SRI: 33

SLATE BLUESR: 0.28 E: 0.85 SRI: 27

REGAL BLUESR: 0.26 E: 0.85 SRI: 24

FLUROPON® PVDF —KYNAR 500®

Formulated with 70% Kynar 500® resin, Fluropon® is a premium fluoropolymer coating. Factory applied and baked on, it provides excellent adhesion and flexibility properties with aluminum, HDG steel or Galvalume® components.

0.8 mil color coat

0.2 mil primer

Substrate

ALL THICKNESSESARE NOMINAL

DYNAPON®

Interior Finish An extremely durable polyester finish, Valspar’s Dynapon® is an economical two-coat coil coat-ing system with ceramic pigments used for interior applications.

0.8 mil color coat

0.2 mil primer

Substrate

ALL THICKNESSESARE NOMINAL

SR (Solar Reflectivity) This is the ability of a material to reflect solar energy back into the atmosphere. Rated on a scale from 0 to 1, where 1 is the most reflective.

E (Emissivity) Emissivity is the materials ability to release absorbed energy back into the atmosphere. Rated on a scale from 0 to 1, where 1 is the most emissive.

SRI (Solar Reflective Index) This is used to determine compliance with LEED® requirements and is calculated according to ASTM E 1980 using values for reflectance and the materials ability to release absorbed energy (emissivity) in medium wind speed conditions. Rated on a scale from 0 to 100, where 100 is the most reflective.

FLUROPON CLASSIC® PVDF

Fluropon Classic® PVDF is a premium fluoropolymer coating containing 70% Kynar 500® proprietary resin and incorporates metal flakes in the color coat to create a metallic effect. Due to its outstanding color retention and resistance to ultraviolet radiation, it is the preferred choice among architects.

0.5 mil clear coat

0.8 mil color coat

0.2 mil primer

Substrate

ALL THICKNESSESARE NOMINAL

0.8 mil color coat

0.2 mil primer

Substrate

ALL THICKNESSESARE NOMINAL

FLUROPON CLASSIC® II PVDF

Fluropon Classic® II PVDF is a premium fluoropolymer coating containing 70% Kynar 500®

proprietary resin that achieves a pearlescent appearance. This two-coat system is a cost-effective alternative to metallic systems requiring clear coats.

MEDIUM GRAYSR: 0.36 E: 0.85 SRI: 38

CHAMPAGNE GOLDSR: 0.48 E: 0.82 SRI: 53

SEAFOAM GREENSR: 0.49 E: 0.87 SRI: 56

BRIGHT SILVERSR: 0.57 E: 0.81 SRI: 65

PREMIUM COLORS | METALLIC

PREMIUM COLORS | MICA

SILVERSMITHSR: 0.53 E: 0.79 SRI: 59

WEATHERED ZINCSR: 0.33 E: 0.84 SRI: 33

CHAMPAGNE BRONZESR: 0.44 E: 0.78 SRI: 46

COPPER PENNYSR: 0.48 E: 0.84 SRI: 54

CHAMPAGNE PEARLSR: 0.48 E: 0.81 SRI: 53

PRE-WEATHERED BLUE GRAY

PRE-WEATHERED GRAPHITE GRAY

ANTHRA ZINC

QUARTZ ZINC

ZINC ALLOY

Morin makes it easy to add protection and visual distinction to your next project. With a state-of-the-art color and paint facility one can achieve virtually any tint, shade or finish to your specifications, quickly and accurately. To get started, contact our experienced sales representatives today for details.

CUSTOM COLOR MATCHING AVAILABLE

MORIN is pleased to offer our premium single-skin panels formed from a variety of zinc alloys with finishes ranging from natural to pre-weathered. These zinc alloys provide designers with both the anticipated patina as well as some unique color finishes that remain until the classic aging process takes over.

* IMPERIAL WHITE is only available in Dynapon®

Color chips are shown within limits of chip reproduction, but are not necessarily accurate due to printing process and viewing conditions. Color chip samples are available upon request.

Metalescent colors (Mica and Metallic colors) are directional colors and will have minor differences with each production run. To minimize these effects, all materi-al for the project should be painted together.

©Carlos J Meyer Photography