The grid structure of a cladding system creates an inherent design opportunity to express a number of visual statements. From the subtilty of a monolithic approach to the attention-grabbing look of Mondrian-inspired elements, this simple combination of lines and color offers endless possibilities. So embrace the grid, andthen highlight it with color!

A

B

C

D

E

COLOR GUIDE

Citadel Architectural Products, Inc.

3131-A North Franklin RoadIndianapolis, Indiana 46226phone (317) 894-9400 • (800) 446-8828fax (317) 894-6333 • (800) 247-2635www.citadelap.com • info@citadelap.com

CLADDING SYSTEMS & GLAZING PANELS

©2015 Citadel Architectural Products, Inc. All Rights Reserved.Panel 15®, SinoCore®, ProCore™, Panel 20®, and Envelope 2000® are trademarks of Citadel Architectural Products, Inc.Kynar 500® is a registered trademark of Arkema, Inc. Duranar® and ULTRA-COOL® are registered trademarks of PPG Industries, Inc.Printed In The U.S.A. 04/15

SERIES A,D D - color coatB - pretreatmentA - aluminum skin

• economical choice for coatings

• durable, hard surface• available in a wide range of colors

Thermosetting paint systemapplied with similar techniquesto PVDF (based on volume).

SERIES B

SERIES F,G

SERIES H

SERIES H

SERIES I,J

Pa

nel

15

®

Sin

oC

ore

®

Pro

Co

reT

M

Pa

nel

20

®

En

velo

pe 2

00

0® R

V /

DR

V

Gla

zeG

ua

rd®

AVAILABILITY BY PRODUCT

En

velo

pe 2

00

0® R

R /

RS

• • •

• • •

• • • • • •

• • • • • •

• • • • • •

• • • • • •

1-Coat1

Textured/SmoothPolyester

TYPE COMPOSITIONCATEGORY FEATURES & BENEFITS DESCRIPTION

D - color coatC - primerB - pretreatmentA - aluminum skin

• used for premium/custom colors

• similar in performance to polyester• good gloss retention and weatherability

Two-component cross-linkedsystem applied withelectrostatic or conventionalspray equipment.

1-CoatTexturedAcrylic Urethane

D - color coatC - primerB - pretreatmentA - aluminum skin

• industry benchmark for quality

• unsurpassed color retention, chemical resistance and fi lm erosion resistance

Heat-set coating using 70%Kynar 500® or Hylar 5000®

resins.

2-CoatSmoothPVDF

(mica)

(metallic)

D - color coatC - primerB - pretreatmentA - aluminum skin

• metallic look without metal fl ake

• performance same as standard 2-coat smooth PVDF

Heat-set coating using 70%Kynar 500® or Hylar 5000®

resins with mica fl akes.

2-CoatSmoothPVDF

E - clear coatD - color coatC - primerB - pretreatmentA - aluminum skin

• similar in performance to 2-coat PVDF with additional clear coat

coat for extra protection• contains actual metal fl ake

Heat-set coating using 70%Kynar 500® or Hylar 5000®

resins with metal fl akes.

3-CoatSmoothPVDF

• nickel/hydrate seal• colorant2

• aluminum oxide• barrier• aluminum skin

• not an anodic look or paint,

but a true integral anodized aluminum to match storefront and window extrusions

Transparent or colored oxidizedfi nish integral to the basealuminum induced withelectricity and chemicals.

IntegralAnodized

Clear Coat (0.60 to 0.70 mil)

Color Coat (0.75 to 0.80 mil)

Primer (0.20 mil)

Pretreatment

Aluminum Skin (0.010" to 0.040")

•

•

1 - Primer is present on Polar White and Battleship Grey.2 - Clear Satin Anodized does not use a colorant.3 - Series C and Series E have been discontinued.

EMBRACE THE GRID...

YEAR30

WARRANTY

YEAR5

WARRANTY

YEAR30

WARRANTY

YEAR20

WARRANTY

89 87 85 59 37 30

ULTRA-COOLULTRA-COOL®®

DURANARDURANAR®®

CoatingsCoatings

80 66 64

37 31 30

0

32 33 37 45 30 23

42 29 26 4 27

72 57 47 26 28 42

53 59 39 46

17 16 19 3 22 29

32

SILVERGREY

MEDIUMBRONZE

SLATEGREY

SANDSTONE SIERRATAN

CHARCOALGREY

SKYBLUE

BRANDYWINEREGALBLUE

REGALRED

COLONIALRED

TERRACOTTA

PATINAGREEN

HEMLOCKGREEN

HARTFORDGREEN

MANSARDBROWN

SHERWOODGREEN

EBONY

SERIES A: Standard Textured Polyester (.010")

ARCTICWHITE

BONEWHITE

RESERVEWHITE

SANDSTONE

SILVERGREY

PUEBLOBEIGE

SLATEGREY

SIERRATAN

CHARCOALGREY

MEDIUMBRONZE

EBONY

SHASTAWHITE

STATUARYBRONZE

SKYBLUE

PATINAGREEN

REGALBLUE

HEMLOCKGREEN

TERRACOTTA

REGALRED

SHERWOODGREEN

COLONIALRED

HARTFORDGREEN

BRANDYWINE

MANSARDBROWN

SERIES F: Standard Kynar 500® (.024")

SERIES G: Premium Kynar 500® (.024")

SILVERMETALLIC

ATLANTICSUNRISE (MICA)

PLATINUM(MICA)

CHAMPAGNEMETALLIC

PEWTER

CHAMPAGNEBRONZE (MICA)

GUN METAL(MICA)

DESERTSAND (MICA)

LIQUIDCOPPER (MICA)

NORTH SEAMIST (MICA)

CLEAR SATINANODIZED

BLACKANODIZED

MEDIUM BRONZEANODIZED

DARK BRONZEANODIZED

SERIES H: Standard Kynar 500® Mica/Metallic (.024")

SERIES I: Standard Anodized (.024")

SERIES J: Premium Anodized (.024")

Custom Kynar 500® Mica/Metallic

POLAR WHITE(48" ONLY)

CLASSICWHITE

BATTLESHIP GREY(48" ONLY)

CLASSICBRONZE

METALLICSILVER

SERIES D: Standard Smooth Polyester (.024")

STOCK POLYESTER FINISHES STOCK PVDF FINISHES STOCK PVDF FINISHES

STOCK ANODIZED FINISHES

CUSTOM / NON-STOCK FINISHES(continued)

CHAMPAGNEANODIZED

HIGH GLOSSWHITE

METALLICSILVER

SHASTAWHITE

PUEBLOBEIGE

STATUARYBRONZE

CLASSICBRONZE

BONEWHITE

SERIES B: Premium Textured Acrylic Urethane (.010")

Durable yet budget-friendly. These fi nishes offer excellent durability while providing a more economical alternative. Available in a wide range of colors, the textured fi nishes help conceal any dings or dents and the smooth fi nishes provide an alternate option for glazing infi ll.

Guaranteed performance just got better. As an industry benchmark, Kynar 500® coatings have long been known for quality and durability. Now, these coatings have become even better with the introduction of ‘cool’ technology providing enhanced performance for longer... guaranteed.

The beauty of color, the shine of metal. Mixing mica or metallic fl akes within the paint coatingallows the base color to offer additional pop, bringing depth to the building elevation. This look is further enhanced by the way in which these fl akes refl ect the light from different viewpoints.

An additional degree of expression. From metallic paints to specialty fi nishes and ‘natural’ metals, these custom offerings provide a variety of ways to add another layer of visual dimension to any elevation.Or, take that unique approach even further with a wood grain fi nish to bring warmth and depth.

no min quantity, no set-up charge 2 week standard lead time

no min quantity, no set-up charge 2 week standard lead time

no min quantity, no set-up charge 2 week standard lead time

minimum quantity varies, set-up charges may apply lead time varies

Actual anodized aluminum. These fi nishes are chemically and electrically produced (not just ananodic-look paint), and offer an excellent complement to storefont and glazing system extrusions.

- Indicates ULTRA-COOL® color. - Indicates the Solar Refl ectivity Index (SRI). Higher numbers means greater refl ectivity and less heat gain. - Indicates a directional, lot-specifi c material. When specifying material for a project, panels with these fi nishes must be installed in all the same direction (180° not acceptable).

greater solar refl ectivity increased energy effi ciency exceptional color stability superior chalk and fade resistance

SILVERSTORM(MICA)

MEDIUM GRAY(MICA)

DRIFTWOOD(MICA)

DARK BRONZE(MICA)

RUSSET PEARL(MICA)

COPPERCANYON (MICA)

STAINLESS STEEL(48" WIDE ONLY)

QUARTZ-ZINC®

(39.25" WIDE ONLY)COPPER(48" WIDE ONLY)

LONGBRUSHED

RUSTED STEEL(36" WIDE ONLY)

Moldings are not available in these fi nishes.

These decorative fi nishes are on an .032” aluminum substrate. Grain patterns are available in both light (LT) and dark (DK) versions.

BARREL OAK - LT(48" ONLY)

MOUNTAIN PINE - LT(48" ONLY)

HERITAGE OAK - DK(48" ONLY)

HAMPTON TEAK - DK(48" ONLY)

MILLWORK CHERRY - LT(48" ONLY)

HEIRLOOM CHERRY - DK(48" ONLY)

NORTHWEST FIR - DK(48" ONLY)

Anodized fi nishes are Exterior Standard No. 1 Class I or Class II anodizing is available as a premium custom fi nish. However, the warranty remains the same

and fabrication diffi culties will result (increased crazing, cracking) due to the fi lm thickness.

NOTE: Series C and Series E have been discontinued.

Custom Specialty Finishes Custom Metals

Custom Wood Grain Finishes

Custom Anodized Finishes

MATTE BRUSHEDANODIZED

LIGHT ZINCANODIZED

DARK ZINCANODIZED

COPPER PENNYANODIZED

Need a custom color to match your standard? 1) submit your color sample to our sales staff, 2) approve the resulting color match, and then 3) the order will be ready to ship in 4 to 6 weeksfor quantities less than 7,500 sq ft, or 8 to 10 weeks for quantities greater than 7,500 sq ft.

Moldings are available (batten profi les only) in the same grain pattern.

Moldings are not available in these fi nishes.