cold weld alternativekeytechkorea.co.kr/_yesweb/_data/ykbuilder/lorking_pipe fitting.pdf · lokring...
TRANSCRIPT
LOK
RIN
G P
IPE S
OLU
TIO
NS
™
1
PERMANENTCold Weld Alternative
ASME B31.1
ASME B31.3
ASSEMBLED Within Minutes
LOK
RIN
G P
IPE
SO
LUT
ION
S™
2
PATENTED WELD EQUIVALENT
WHEN YOU NEED A BETTER CONNECTION™
T E C H N O L O G Y L L C
CouplingPg. 8
Repair/Slip CouplingPg. 9
Reducing CouplingPg.10
CapPg. 11
FlangePg. 11, 12
90° Elbow (Long Radius)
Pg. 12
90° Elbow (Short Radius)
Pg. 13
45° ElbowPg. 13
TeePg. 14
Branch Tee Pg. 15, 16
Male NPTAdapter
Pg. 17
Female NPTAdapter
Pg. 18
Male 37° FlareAdapter
Pg. 19
Female SAEAdapter
Pg. 20
Socket WeldAdapter
Pg. 21
SAE FlangeAdapter
Pg. 22
Page 3 - About Lokring™ Pipe Fittings
Page 4 - Elastic Strain Preload Technology
Page 5 - Pressure and Temperature Ratings
Page 7 - Pipe Schedules
Page 23 - Other Products O#ered
Page 24 - Hydraulic Pumps
Page 25 - Installation Tools
Page 25 - Tooling Dimensions
Page 26 - Installation Instructions
Page 27 - Warranty Information
LOK
RIN
G P
IPE S
OLU
TIO
NS
™
Some examples of reduced costs are:
• Obtain $re permit for hot work
• Erect sca#olding and provide ventilation
• “Sni#” area, gas free, and weather protect
• Blank %anges and nozzles
• Establish $re watch
• Build $re box or tarps
• Drain, %ush, and dry lines
• Cranes, welders, grinders, and small tools
• Weld consumables (purge gas and $ller rod)
• Workers’ compensation, insurance, and bene$ts
• Weld X-ray or other NDT
• Rework of damaged or misaligned spools
• System soak, %ush, or passivation; HAZMAT
disposal
• Maintain and monitor %anges for leakage
In addition, scarce ASME-certi$ed welders are freed
up for large-bore pipe or pressure vessel welding.
3
PIPE SOLUTIONS™
©2015 LOKRING TECHNOLOGY LLC®
� � � � � � � � � � � � � � � � � � � � � � � � � � � �� � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
By eliminating the welding process, many overhead costs relating to safety, personnel,
equipment and supplies, inspection, rework, and monitoring can be eliminated or
substantially reduced.
NO WELDS,
NO THREADS, NO LEAKS!
� � � � � � � � � � � � � � � � � � �
Lokring Pipe FittingsLokring pipe $ttings are quali$ed to the requirements
of the ASME B31 pressure piping codes for pressure
and fatigue design, as well as materials of construction.
Extensive mechanical and environmental testing has
demonstrated the mechanical and sealing integrity of the
Lokring connection in a wide range of applications. Lokring
$ttings typically are used where $re-safe conditions must
be maintained.
LOK
RIN
G P
IPE
SO
LUT
ION
S™
ELASTIC STRAIN PRELOAD
(ESP®) TECHNOLOGY
The leak-free seal is the result of Lokring ESP installation where the axial movement of the Lokring
driver over the body swages the body onto the pipe’s surface. This compresses the pipe wall $rst
elastically and then plastically.
The pipe wall resists this swaging action, generating high unit compressive loads at the contact
points between narrow sealing lands inside the $tting body and the pipe surface.
These contact stresses are su&ciently high to plastically yield the pipe surface under the sealing
lands, forming a 360° circumferential, permanent, metal-to-metal seal between the pipe and $tting
body.
The driver, which experiences a small increase in diameter (elastic strain) during installation, exerts
an elastic, radial preload on the metallic seals for the life of the connection, which is called Elastic
Strain Preload (ESP).
4
PATENTED WELD EQUIVALENT
WHEN YOU NEED A BETTER CONNECTION™
Anti-Torsion Seal(s)
(where equipped)
• Prevents pipe from
rotating
Fitting Body
• Plastically swaged onto
pipe OD in order to create
permanent 360° sealInboard Seal
• First sealing ring
• Creates permanent,
helium leaktight seal on
the pipe
Main Seal
• Middle sealing ring(s)
• Additional sealing and
leak prevention
Outboard Seal
• Outermost sealing ring
• Additional sealing and
leak prevention
Uninstalled
• Driver not yet pushed
over $tting body
Tool Flange
• Installation tool grabs
onto this to install the
$ttingInstalled
• Driver pushed over
$tting body
Pipe
Driver
• Creates an elastic
strain preload or
spring load on the
body
LOK
RIN
G P
IPE S
OLU
TIO
NS
™
PRESSURE AND TEMPERATURE RATINGS
CARBON STEEL PIPE FITTINGS
5
PIPE SOLUTIONS™
©2015 LOKRING TECHNOLOGY LLC®
Temperature De-rating Table for Carbon Steel (CS) Pipe Fittings
Temperature
°F (°C)
Temperature De-rating
Factor B31.1
Temperature De-rating
Factor B31.3
400
(204)
1.00 1.00
500
(260)
0.95 0.95
600
(316)
0.87 0.87
650
(343)
0.75 0.75
Lokring o#ers Carbon Steel Repair Couplings which are of a “slip-over” design in
order to facilitate repair work. They consist of a stainless steel body with carbon
steel drive rings. Their pressure ratings are the same as those of Lokring stainless
steel pipe $ttings, and have a temperature rating of the carbon steel pipe $ttings.
Pressure ratings are for Lokring proprietary joint design assembled on
designated pipe. Lokring Technology, LLC also manufactures nonproprietary joint
connections to design standards (e.g. SAE, NPS, 37 Flare, etc.) which are to be
considered by the piping design engineer for rating the system.
The Lokring design technology is compatible with the OD and wall thickness
tolerance for carbon steel as outlined in BS EN 10216-2:2002 Section 8.7.4.1.
Ordering Information:
Other $ttings not listed in this catalog and special shapes may be available.
Contact your authorized Lokring distributor for more information. See
www.lokring.com for a complete listing of distributors.
All dimensions are for reference only and are subject to change. CAD $les in are
available in most con$gurations upon request.
TEMPERATURE RATING:
Piping systems containing the piping assemblies
listed may establish design pressures up to and
including the ambient maximum design pressure
given for temperatures from –20 to 400 °F
(–28 to 204 °C) for ASME B31.1 and B31.3. For
temperatures above 400 °F (204°C) the maximum
design pressure given shall be multiplied by the
temperature de-rating factor listed below.
NOTES:
1. Fitting material micro alloyed carbon steel
(MAS-3000) in accordance with ASTM A675 or
A513.
2. Lokring carbon steel pipe $ttings are designed
with an internal stop facilitating corrosion
allowances.
3. See Lokring Speci$cation FS-3000 for details on
pressure and temperature ratings.
4. See Lokring “Corrosive Service Guidelines” for
speci$c service details.
5. See “Lokring Fitting Applications Guide” for
additional design and service details.
MATCHING PIPE:
• Carbon steel pipe to ASTM A106 and A53
• ERW carbon steel pipe to ASTM A53E and A587
• Seamless carbon steel pipe to ASTM A106 and
A53S
• Pipe shall be of high quality, fully annealed
construction with maximum Rockwell B scale
hardness of 90.
Lokring
Carbon
Steel Pipe
Fittings
Lokring
Size
Pipe NPS
in.
ASME B31.1
Pipe Schedules
ASME B31.3
Pipe Schedules
40 80 160 40 80 160
Pressure Rating, psi (bar)
Carbon
Steel
Pipe
Product
P04 1/44890(337)
6610(456)
A 6250(431)
8810(607)
A
P06 3/84040(279)
5600(386)
A 5390(372)
7470(515)
A
P08 1/23890(268)
5250(362)
4810(332)
5190(358)
7000(483)
6410(442)
P12 3/43230(223)
4400(303)
4240(292)
4300(296)
5870(405)
5650(390)
P16 13030(209)
3975(274)
3650(252)
4050(279)
5300(365)
4870(336)
P20 1 1/42480(171)
3350(231)
A 3310(228)
4460(308)
A
P24 1 1/22200(152)
2930(202)
A 2930(202)
3900(269)
A
P32 21790(123)
2420(167)
A 2390(165)
3230(223)
A
P40 2 1/22300(159)
2550(176)
A 2670(184)
2970(205)
A
P48 31700(117)
2260(156)
A 2270(157)
2470(170)
A
P64 41980(137)
2640(182)
A 2310(159)
3070(212)
A
A. Not tested.
LOK
RIN
G P
IPE
SO
LUT
ION
S™
6
PATENTED WELD EQUIVALENT
WHEN YOU NEED A BETTER CONNECTION™
PRESSURE AND TEMPERATURE RATINGS
STAINLESS STEEL PIPE FITTINGS
Temperature De-rating Table for Stainless Steel (SS) Pipe Fittings
Temperature
°F (°C)
Temperature De-rating
Factor B31.1
Temperature De-rating
Factor B31.3
200
(93)
1.00 1.00
300
(148)
0.98 1.00
400
(204)
0.96 0.97
500
(260)
0.96 0.90
600
(315)
0.90 0.85
650
(343)
0.89 0.84
700
(371)
0.87 0.82
750
(398)
0.86 0.81
800
(426)
0.85 0.80
Ordering Information:
Other $ttings not listed in this catalog and special shapes may be available.
Contact your authorized Lokring distributor for more information. See
www.lokring.com for a complete listing of distributors.
All dimensions are for reference only and are subject to change. CAD $les are
available in most con$gurations upon request.
TEMPERATURE RATING:
Piping systems containing the piping assemblies
listed may establish design pressures up to and
including the ambient maximum design pressure
given for temperatures from –20 to 100 °F (–28 to
38 °C) for ASME B31.1 and B31.3. For temperatures
above 200 °F (93 °C) the maximum design pressure
given shall be multiplied by the temperature de-
rating factor listed below.
NOTES:
1. Fitting material 316L stainless steel in accordance
with ASTM A276 or ASTM A479.
2. Lokring stainless steel pipe $ttings are of a “slip-
over” design facilitating zero-clearance pipe repair.
3. See Lokring Speci$cation FS40 for details on
Pressure and Temperature Ratings.
4. See Lokring “Corrosive Service Guidelines” for
speci$c service details.
5. See “Lokring Fitting Applications Guide” for
additional design and service details.
MATCHING PIPE:
• 304/304L and 316/316L stainless steel pipe to
ASTM A312
• Carbon steel pipe to ASTM A106 and A53
• Seamwelded (ERW) carbon steel pipe to
ASTM A53E and A587. Seamless carbon steel pipe
to ASTM A106 and A53S
• Pipe shall be of high quality, fully annealed
construction with maximum Rockwell B scale
hardness of 90.
Lokring
Stainless
Steel Pipe
Fittings
Lokring
Size
Pipe NPS
in.
ASME B31.1
Pipe Schedules
ASME B31.3
Pipe Schedules
10 40 80 10 40 80
Pressure Rating, psi (bar)
Stainless
Steel
Pipe
Product
P04 1/4 3781(261)
5300(365)
6000(414)
4529(312)
6300(434)
8000(552)
P06 3/8 3400(234)
4900(338)
5750(396)
3600(248)
5200(359)
6100(429)
P08 1/2 4030(278)
4760(328)
4760(328)
4290(296)
5060(349)
5060(349)
P12 3/4 3170(219)
4210(290)
4930(340)
3380(233)
4470(308)
5250(362)
P16 1 3340(230)
3680(254)
3990(275)
3550(245)
3920(270)
4240(292)
P20 1 1/4 2450(169)
2700(186)
2980(205)
2675(184)
2910(201)
3170(219)
P24 1 1/2 2260(156)
2440(168)
2440(168)
2410(166)
2600(179)
2600(179)
P32 2 1500(103)
2200(152)
2500(172)
1600(110)
2300(159)
2700(186)
P48 3 920(63)
1700(117)
1350(93)
1150(79)
2100(145)
1705(118)
(2.77) 0.133
LOK
RIN
G P
IPE
SO
LUT
ION
S™
Coupling
Pipe
Size
NPS
in.
Ordering Information Dimensions, in. Loktool®
Fitting
Material Shape
Fitting
Size
PXX
Part Length
(Uninstalled)
L E
Take-
Out
A C
Installation
Tool Kit
1/4CS -CPL-
P042.88 1.05 0.40 0.38
IT20/IT45SS -CPL- 2.88 1.05 — —
3/8CS -CPL-
P063.20 1.24 0.45 0.50
IT30/IT45SS -CPL- 3.20 1.24 — —
1/2CS -CPL-
P083.33 1.46 0.47 0.63
IT30/IT45SS -CPL- 3.45 1.46 — —
3/4CS -CPL-
P123.71 1.60 0.47 0.81
IT30/IT45SS -CPL- 3.88 1.63 — —
1CS -CPL-
P164.55 1.95 0.60 1.03
IT45/IT60SS -CPL- 4.39 1.96 — —
1 1/4CS -CPL-
P205.02 2.29 0.59 1.38
IT60SS -CPL- 5.02 2.36 — —
1 1/2CS -CPL-
P245.44 2.61 0.66 1.59
IT60SS -CPL- 5.60 2.58 — —
2CS -CPL-
P326.54 3.25 0.71 2.05
IT60SS -CPL- 6.14 3.10 — —
2 1/2 CS -CPL- P40 8.79 3.80 1.33 2.42 IT100
3CS -CPL-
P489.43 4.34 0.85 2.94
IT100/IT140SS -CPL- 9.43 4.50 — —
4 CS -CPL- P64 10.88 5.15 — — IT140
All dimensions are for reference only and are subject to change.
Consult your authorized Lokring distributor for details and other options.
Carbon Steel Fittings
(With center stop)
Stainless Steel Fittings
(Without center stop)
8
PATENTED WELD EQUIVALENT
WHEN YOU NEED A BETTER CONNECTION™
LOK
RIN
G P
IPE S
OLU
TIO
NS
™
Repair/Slip Coupling
Pipe
Size
NPS
in.
Ordering Information Dimensions, in. Loktool
Fitting
Material Shape
Fitting
Size
PXX
Part Length
(Uninstalled)
L E
Installation
Tool Kit
1/4 CS -RCPL- P04 2.88 1.05 IT20/IT45
3/8 CS -RCPL- P06 3.20 1.24 IT30/IT45
1/2 CS -RCPL- P08 3.33 1.46 IT30/IT45
3/4 CS -RCPL- P12 3.71 1.60 IT30/IT45
1 CS -RCPL- P16 4.55 1.95 IT45/IT60
1 1/4 CS -RCPL- P20 5.02 2.29 IT60
1 1/2 CS -RCPL- P24 5.44 2.61 IT60
2 CS -RCPL- P32 6.54 3.25 IT60
3 CS -RCPL- P48 9.43 4.34 IT100/IT140
All dimensions are for reference only and are subject to change.
Consult your authorized Lokring distributor for details and other options.
Lokring carbon steel repair couplings are “slip-over“ couplings made without an internal stop in order to
facilitate zero-clearance pipe repair work. They consist of a stainless steel body with carbon steel drivers, their
pressure ratings are the same as those of Lokring stainless steel pipe !ttings, and their temperature ratings are
those of the carbon steel !ttings.
9
PIPE SOLUTIONS™
©2015 LOKRING TECHNOLOGY LLC®
Lokring !ttings meet all the criteria of a welded
connection, except that no heat is required to
make the connection.
LOK
RIN
G P
IPE
SO
LUT
ION
S™
Reducing Coupling
PipeSizeNPSin.
Ordering Information Dimensions, in. Loktool
FittingMaterial Shape
FittingSize
PXX-PYY
Part Length(Unin-
stalled)L Exx Eyy
Take-Out
AIDC
InstallationTool Kit
1/2 to 1/4CS
-RED- P08-P043.75 1.46 1.05 1.09 0.38
IT20/IT30/IT45SS — — — — —
1/2 to 3/8CS
-RED- P08-P063.92 1.46 1.24 1.12 0.49
IT30/IT45SS 3.99 1.46 1.24 0.67 0.49
3/4 to 1/2CS
-RED- P12-P084.29 1.60 1.46 1.25 0.63
IT30/IT45SS 4.49 1.63 1.46 0.83 0.64
1 to 1/2CS
-RED- P16-P084.90 1.95 1.46 1.50 0.63
IT30/IT45/IT60SS 4.93 1.96 1.46 1.02 0.64
1 to 3/4CS
-RED- P16-P125.10 1.95 1.60 1.50 0.81
IT30/IT45/IT60SS 5.03 1.96 1.63 0.90 0.82
1 1/4 to 3/4CS
-RED- P20-P125.24 2.29 1.60 1.41 0.87
IT30/IT45/IT60SS — — — — —
1 1/4 to 1CS
-RED- P20-P165.92 2.29 1.95 1.73 1.03
IT45/IT60SS 5.78 2.36 1.96 1.04 1.07
1 1/2 to 1/2CS
-RED- P24-P085.94 2.61 1.46 2.12 0.63
IT30/IT45/IT60SS — — — — —
1 1/2 to 3/4CS
-RED- P24-P126.01 2.61 1.60 2.00 0.81
IT30/IT45/IT60SS 6.59 2.58 1.63 1.85 0.82
1 1/2 to 1CS
-RED- P24-P166.24 2.61 1.95 1.88 1.03
IT45/IT60SS 6.70 2.58 1.96 1.70 1.07
1 1/2 to 1 1/4CS
-RED- P24-P206.29 2.61 2.29 1.68 1.38
IT60SS 6.22 2.58 2.36 1.88 1.44
2 to 1/2CS
-RED- P32-P086.84 3.25 1.46 2.50 0.63
IT30/IT45/IT60SS — — — — —
2 to 3/4CS
-RED- P32-P126.78 3.25 1.60 2.25 0.81
IT30/IT45/IT60SS — — — — —
2 to 1CS
-RED- P32-P167.15 3.25 1.95 2.25 1.03
IT45/IT60SS 7.28 3.10 1.96 2.07 1.05
2 to 1 1/4CS
-RED- P32-P207.36 3.25 2.29 2.23 1.38
IT60SS 7.38 3.10 2.36 1.77 1.44
2 to 1 1/2CS
-RED- P32-P247.31 3.25 2.61 2.01 1.59
IT60SS 7.11 3.10 2.58 1.24 1.65
3 to 1/2CS
-RED- P48-P0810.91 4.34 1.46 5.20 0.63 IT30/IT45/IT100/
IT140SS — — — — —
3 to 1CS
-RED- P48-P1611.68 4.34 1.95 5.42 0.96 IT45/IT60/IT100/
IT140SS 11.28 4.50 1.96 4.50 1.05
3 to 1 1/2CS
-RED- P48-P2412.05 4.34 2.61 5.37 1.51
IT60/IT100SS — — — — —
3 to 2CS
-RED- P48-P3212.59 4.34 3.25 5.39 1.94
IT60/IT100/IT140SS 12.39 4.50 3.10 4.61 2.07
All dimensions are for reference only and are subject to change.
Consult your authorized Lokring distributor for details and other options.
10
PATENTED WELD EQUIVALENT
WHEN YOU NEED A BETTER CONNECTION™
LOK
RIN
G P
IPE S
OLU
TIO
NS
™
Pipe
Size
NPS
in.
Ordering Information Dimensions, in. Loktool
Fitting
Mate-
rial Shape
Fit-
ting
Size
PXX
Part Length
(Unin-
stalled)
L E
Take-
Out
A
Installation
Tool Kit
1/2CS
-CAP- P081.96 1.46 0.53
IT30/IT45SS 2.57 1.46 0.85
3/4CS
-CAP- P122.16 1.60 0.55
IT30/IT45SS 2.85 1.63 0.91
1CS
-CAP- P162.70 1.95 0.73
IT45/IT60SS 3.24 1.96 1.04
1 1/4CS
-CAP- P204.47 2.29 2.25
IT60SS 3.65 2.36 1.11
1 1/2CS
-CAP- P243.21 2.61 0.82
IT60SS 4.02 2.58 1.22
2CS
-CAP- P325.25 3.25 2.34
IT60SS 4.36 3.10 1.29
3CS
-CAP- P487.34 4.34 3.05
IT100/IT140SS 7.34 4.50 2.63
All dimensions are for reference only and are subject to change.
Consult your authorized Lokring distributor for details and other options.
Cap
Pipe
Size
NPS
in.
Ordering Information Dimensions, in. Loktool
Fitting
Material Shape
Fitting
Size
PXX
Part Length
(Uninstalled)
L E
Take-
Out
A
Installation
Tool Kit
1/2CS
-FLNG150- P083.96 1.46 2.53
IT30/IT45SS 3.95 1.46 2.23
3/4CS
-FLNG150- P124.33 1.60 2.72
IT30/IT45SS 4.37 1.63 2.44
1CS
-FLNG150- P16 4.93 1.95 2.96
IT45/IT60SS 4.76 1.96 2.57
1 1/4CS
-FLNG150- P205.22 2.29 3.00
IT60SS 5.16 2.36 2.67
1 1/2CS
-FLNG150- P245.64 2.61 3.26
IT60SS 5.67 2.58 2.87
2CS
-FLNG150- P326.25 3.25 3.34
IT60SS 6.03 3.10 2.98
3CS
-FLNG150- P488.09 4.34 3.80
IT100/IT140SS 8.40 4.50 3.68
4 CS -FLNG150- P64 9.52 5.15 4.06 IT140
Note: Class 150 dimensions shown. All dimensions are for reference only and are subject to change.
Lokring "ange !ttings in "ange class 300, 600, 900, and 1500 are also available. Replace 150 in Ordering Information Shape with
desired class to specify part.
Consult your authorized Lokring distributor for details and other options.
ASME Flange Adapter Class 150
11
PIPE SOLUTIONS™
©2015 LOKRING TECHNOLOGY LLC®
LOK
RIN
G P
IPE
SO
LUT
ION
S™ Pipe
Size
NPS
in.
Ordering Information Dimensions, in. Loktool
Fitting
Material Shape
Fitting
Size
PXX
Part Length
(Unin-
stalled)
L E
Take-
Out
A
Installation
Tool Kit
1/2CS
-FLNG300- P084.14 1.46 2.71
IT30/IT45SS 4.13 1.46 2.41
3/4CS
-FLNG300- P124.60 1.60 2.98
IT30/IT45SS 4.57 1.63 2.63
1CS
-FLNG300- P165.19 1.95 3.21
IT45/IT60SS 5.01 1.96 2.82
1 1/4CS
-FLNG300- P205.53 2.29 3.31
IT60SS 5.53 2.36 2.98
1 1/2CS
-FLNG300- P245.90 2.61 3.50
IT60SS 5.92 2.58 2.95
2CS
-FLNG300- P326.50 3.25 3.59
IT60SS 6.53 3.25 3.25
3CS
-FLNG300- P488.46 4.34 4.17
IT100/IT140SS 8.40 4.50 3.66
4 CS -FLNG300- P64 9.90 5.15 4.44 IT140
Note: Class 300 dimensions shown. All dimensions are for reference only and are subject to change.
Lokring "ange !ttings in ASME class 150, 600, 900, and 1500 are also available. Replace 300 in Ordering Information Shape
with desired class to specify part.
Consult your authorized Lokring distributor for details and other options.
ASME Flange AdapterClass 300
Pipe
Size
NPS
in.
Ordering Information Dimensions, in. Loktool
Fitting
Material Shape
Fitting
Size
PXX
Part Length
(Uninstalled)
L E
Take-
Out
A
Installation
Tool Kit
1/2CS
-EL90- P084.31 1.46 2.15
IT30/IT45SS 4.31 1.46 2.15
3/4CS
-EL90- P124.20 1.60 1.79
IT30/IT45SS 4.63 1.63 1.88
1CS
-EL90- P165.22 1.95 2.27
IT45/IT60SS 5.05 1.96 1.88
1 1/4CS
-EL90- P205.99 2.29 2.63
IT60SS 6.02 2.36 2.30
1 1/2CS
-EL90- P246.76 2.61 3.07
IT60SS 6.77 2.58 2.68
2CS
-EL90- P328.38 3.25 3.84
IT60SS 8.10 3.10 3.48
3CS
-EL90- P4812.01 4.34 5.55
IT100/IT140SS 12.09 4.50 5.13
4 CS -EL90- P64 15.28 5.15 7.06 IT140
All dimensions are for reference only and are subject to change.
Consult your authorized Lokring distributor for details and other options.
90° ElbowLong radius
12
PATENTED WELD EQUIVALENT
WHEN YOU NEED A BETTER CONNECTION™
LOK
RIN
G P
IPE S
OLU
TIO
NS
™
Pipe
Size
NPS
in.
Ordering Information Dimensions, in. Loktool
Fitting
Material Shape
Fitting
Size
PXX
Part Length
(Unin-
stalled)
L E
Take-
Out
A
Installation
Tool Kit
1/4CS
-EL90SR- P04— — —
IT20/IT45SS 3.11 1.05 1.15
3/8CS
-EL90SR- P06— — —-
IT30/IT45SS 3.37 1.24 1.15
1/2CS
-EL90SR- P083.78 1.46 1.62
IT30/IT45SS 3.78 1.46 1.62
3/4CS
-EL90SR- P123.96 1.60 1.54
IT30/IT45SS 3.96 1.60 1.54
All dimensions are for reference only and are subject to change.
Consult your authorized Lokring distributor for details and other options.
90° ElbowShort radius
Pipe
Size
NPS
in.
Ordering Information Dimensions, in. Loktool
Fitting
Material Shape
Fitting
Size
PXX
Part Length
(Uninstalled)
L1
Part Length
(Uninstalled)
L2 E
Take-
Out
A
Installation
Tool Kit
1/4CS
-EL45- P04— — — —
IT20SS 2.62 4.55 1.05 1.02
3/8CS
-EL45- P06— — — —
IT30/IT45SS 2.85 4.77 1.24 0.95
1/2CS
-EL45- P083.15 5.13 1.46 1.28
IT30/IT45SS 3.14 5.11 1.46 0.98
3/4CS
-EL45- P123.49 5.72 1.60 1.41
IT30/IT45SS 3.54 5.80 1.63 0.82
1CS
-EL45- P164.23 6.84 1.95 1.61
IT45/IT60SS 4.10 6.57 1.96 1.25
1-1/4CS
-EL45- P204.73 7.56 2.29 1.75
IT60SS 4.80 7.58 2.36 1.42
1-1/2CS
-EL45- P245.28 8.31 2.61 1.94
IT60SS 5.26 8.33 2.58 1.56
2CS
-EL45- P326.39 9.89 3.25 2.21
IT60SS 6.08 9.41 3.10 1.86
3CS
-EL45- P488.82 14.14 4.34 3.20
IT100/IT140SS 8.97 14.06 4.50 2.63
All dimensions are for reference only and are subject to change.
Consult your authorized Lokring distributor for details and other options.
45° Elbow
13
PIPE SOLUTIONS™
©2015 LOKRING TECHNOLOGY LLC®
LOK
RIN
G P
IPE
SO
LUT
ION
S™
Pipe
Size
NPS
in.
Ordering Information Dimensions, in. Loktool
Fitting
Material Shape
Fitting
Size
PXX
Part Length
(Uninstalled)
L1
Part Length
(Uninstalled)
L2 E
Take-
Out
A
Installation
Tool Kit
1/4CS
-TEE- P04— — — —
IT20SS 5.07 3.06 1.05 1.10
3/8CS
-TEE- P06— — — —
IT30/IT45SS 5.39 3.32 1.24 1.10
1/2CS
-TEE- P086.17 3.81 1.46 1.65
IT30/IT45SS 5.69 3.58 1.46 1.13
3/4CS
-TEE- P126.80 4.20 1.60 1.78
IT30/IT45SS 6.41 4.02 1.63 1.26
1CS
-TEE- P168.48 5.22 1.95 2.27
IT45/IT60SS 8.15 5.05 1.96 1.88
1 1/4CS
-TEE- P209.69 5.99 2.29 2.63
IT60SS 9.69 6.02 2.36 2.30
1 1/2CS
-TEE- P2410.91 6.76 2.61 3.07
IT60SS 10.96 6.77 2.58 2.68
2CS
-TEE- P3212.51 7.88 3.25 3.34
IT60SS 12.10 7.60 3.10 2.98
3CS
-TEE- P4817.43 10.88 4.34 4.43
IT100/IT140SS 17.43 10.96 4.50 4.00
4 CS -TEE- P64 21.28 13.40 5.15 5.18 IT140
All dimensions are for reference only and are subject to change.
A. Consult your authorized Lokring distributor for details and other options
Tee
14
PATENTED WELD EQUIVALENT
WHEN YOU NEED A BETTER CONNECTION™
LOK
RIN
G P
IPE S
OLU
TIO
NS
™
Pipe
Size
NPS
in.
Ordering Information Dimensions, in. Loktool
Fitting
Material Shape
Fitting
Size
PXX-PYY
Part Length
(Uninstalled)
L1
Part Length
(Uninstalled)
L2 Exx Eyy
Take-
Out
A
Take-
Out
B
Installation
Tool Kit
1/2 to
1/4
CS-RTEE- P08-P04
— — — — — —IT20/IT30/IT45
SS 5.69 3.34 1.46 1.05 1.13 1.17
1/2 to
3/8
CS-RTEE- P08-P06
— — — — — —IT30/IT45
SS 5.69 3.43 1.46 1.24 1.13 1.10
3/4 to
1/4
CS-RTEE- P12-P04
— — — — — —IT20/IT30/IT45
SS 6.41 3.53 1.63 1.05 1.26 1.28
3/4 to
1/2
CS-RTEE- P12-P08
6.32 4.25 1.60 1.46 1.54 2.01IT30/IT45
SS 6.41 3.83 1.63 1.46 1.26 1.33
1 to 1/4CS
-RTEE- P16-P04— — — — — —
IT20/IT45/IT60SS 8.15 5.06 1.96 1.05 1.88 2.64
1 to 1/2CS
-RTEE- P16-P088.49 4.55 1.95 1.46 2.27 2.15
IT30/IT45/IT60SS 8.15 4.83 1.96 1.46 1.88 2.13
1 to 3/4CS
-RTEE- P16-P128.49 4.75 1.95 1.60 2.27 2.16
IT30/IT45/IT60SS 8.15 4.94 1.96 1.63 1.88 2.02
1 1/4 to
3/4CS -RTEE- P20-P12 9.70 5.80 2.29 1.60 2.63 3.04 IT30/IT45/IT60
1 1/4 to 1CS
-RTEE- P20-P169.70 5.84 2.29 1.95 2.63 2.72
IT45/IT60SS 9.69 5.87 2.36 1.96 2.30 2.50
1 1/2 to
1/2
CS-RTEE- P24-P08
10.91 5.63 2.61 1.46 3.07 2.90IT30/IT45/IT60
SS 10.96 5.90 2.58 1.46 2.68 2.88
1 1/2 to
3/4
CS-RTEE- P24-P12
10.91 5.83 2.61 1.60 3.07 2.91IT30/IT45/IT60
SS 10.96 6.00 2.58 1.63 2.68 2.77
1 1/2 to 1CS
-RTEE- P24-P1610.91 6.30 2.61 1.95 3.07 3.02
IT45/IT60SS 10.96 6.12 2.58 1.96 2.68 2.63
1 1/2 to
1 1/4
CS-RTEE- P24-P20
10.91 6.72 2.61 2.29 3.07 3.20IT60
SS 10.96 6.53 2.58 2.36 2.68 2.70
All dimensions are for reference only and are subject to change.
Consult your authorized Lokring distributor for details and other options.
Reducing Branch Tee
15
PIPE SOLUTIONS™
©2015 LOKRING TECHNOLOGY LLC®
LOK
RIN
G P
IPE
SO
LUT
ION
S™
Pipe
Size
NPS
in.
Ordering Information Dimensions, in. Loktool
Fitting
Material Shape
Fitting
Size
PXX-
PYY
Part Length
(Unin-
stalled)
L1
Part Length
(Unin-
stalled)
L2 Exx Eyy
Take-
Out
A
Take-
Out
B
Installation
Tool Kit
2 to 1/2CS
-RTEE- P32-P0812.51 5.70 3.25 1.46 3.34 2.65
IT30/IT45/IT60SS 12.10 5.90 3.10 1.46 2.98 2.63
2 to 3/4CS
-RTEE- P32-P1212.51 5.90 3.25 1.60 3.34 2.66
IT30/IT45/IT60SS 12.10 6.01 3.10 1.63 2.98 2.52
2 to 1CS
-RTEE- P32-P1612.51 6.37 3.25 1.95 3.34 2.77
IT45/IT60SS 12.10 6.12 3.10 1.96 2.98 2.38
2 to
1 1/4
CS -RTEE- P32-P20
12.51 7.17 3.25 2.29 3.34 3.33 IT60
SS — — — — — —
2 to
1 1/2
CS -RTEE- P32-P24
12.51 7.21 3.25 2.61 3.34 3.20 IT60
SS 12.10 7.61 3.10 2.58 2.98 3.26
3 to 1/2CS
-RTEE- P48-P08— — — — — — IT30/IT45/IT100/
IT140SS 17.43 7.23 4.50 1.46 4.00 3.26
3 to 3/4CS
-RTEE- P48-P1217.28 7.18 4.34 1.60 4.35 3.39 IT30/IT45/IT100/
IT140SS 17.43 7.34 4.50 1.63 4.00 3.15
3 to 1CS
-RTEE- P48-P1617.28 7.64 4.34 1.95 4.35 3.50 IT45/IT60/IT100/
IT140SS 17.43 7.45 4.50 1.96 4.00 3.00
3 to
1 1/4
CS -RTEE- P48-P20
17.43 8.21 4.34 2.29 4.35 3.83 IT60/IT100/IT140
SS — — — — — —
3 to
1 1/2
CS -RTEE- P48-P24
17.28 8.32 4.34 2.61 4.35 3.75 IT60/IT100/IT140
SS 17.43 8.36 4.50 2.58 4.00 3.31
3 to 2CS
-RTEE- P48-P3217.28 8.86 4.34 3.25 4.35 3.78
IT60/IT100/IT140SS 17.43 8.80 4.50 3.10 4.00 3.48
All dimensions are for reference only and are subject to change.
A. Consult your authorized Lokring distributor for details and other options.
Reducing Branch Tee(Continued)
16
PATENTED WELD EQUIVALENT
WHEN YOU NEED A BETTER CONNECTION™
LOK
RIN
G P
IPE S
OLU
TIO
NS
™
Pipe
Size
NPS
in.
Ordering Information Dimensions, in. Loktool
Fitting
Material Shape
Fitting
Size
PXX-
YYMPT
Part Length
(Uninstalled)
L E
Take-
Out
A
Across
Wrench
Flats
F Thread
Installation
Tool Kit
1/4CS
-ADPT- P04-1/4 MPT2.71 1.05 1.47 0.88
1/4-18 IT20/IT45SS 2.89 1.05 1.45 0.63
3/8CS
-ADPT- P06-3/8 MPT— — — —
3/8-18 IT30/IT45SS 3.17 1.24 1.58 0.75
1/2CS
-ADPT- P08-1/2 MPT3.12 1.46 1.69 1.13
1/2-14 IT30/IT45SS 3.18 1.46 1.46 0.94
3/4CS
-ADPT- P12-3/4 MPT3.45 1.60 1.83 1.38
3/4-14 IT30/IT45SS 3.89 1.63 1.95 1.12
1CS
-ADPT- P16-1 MPT4.34 1.95 2.36 1.63
1-11.5 IT45/IT60SS 4.46 1.96 2.26 1.37
1 1/4 CS
-ADPT- P20-1 1/4 MPT4.92 2.29 2.70 1.69
1-1/4-11.5 IT60SS 4.91 2.36 2.37 1.75
1 1/2CS
-ADPT- P24-1 1/2 MPT4.83 2.61 2.45 2.13
1-1/2-11.5 IT60SS 5.33 2.58 2.53 2.00
2CS
-ADPT- P32-2 MPT5.43 3.25 2.51 2.50
2-11.5 IT60SS 5.69 3.10 2.62 2.38
3CS
-ADPT- P48-3 MPT7.58 4.34 3.29 3.50
3-8 IT100/IT140SS — — — —
All dimensions are for reference only and are subject to change.
Consult your authorized Lokring distributor for details and other options.
Male Adapter(NPT)
17
PIPE SOLUTIONS™
©2015 LOKRING TECHNOLOGY LLC®
LOK
RIN
G P
IPE
SO
LUT
ION
S™
Pipe
Size
NPS
in.
Ordering Information Dimensions, in. Loktool
Fitting
Material Shape
Fitting
Size
PXX-YYFPT
Part Length
(Uninstalled)
L E
Take-
Out
A
Across Wrench
Flats
F Thread
Installation
Tool Kit
1/4CS
-ADPT- P04-1/4 FPT— — — —
1/4-18 IT20/IT45SS 2.20 1.05 0.60 0.69
3/8CS
-ADPT- P06-3/8 FPT2.35 1.24 0.98 1.13
3/8-18 IT30/IT45SS 2.50 1.24 0.90 0.94
1/2CS
-ADPT- P08-1/2 FPT2.41 1.46 0.98 1.13
1/2-14 IT30/IT45SS 2.51 1.46 0.78 1.13
3/4CS
-ADPT- P12-3/4 FPT3.59 1.60 1.97 1.31
3/4-14 IT30/IT45SS 2.74 1.63 0.80 1.31
1CS
-ADPT- P16-1 FPT4.35 1.95 2.38 1.69
1-11.5 IT45/IT60SS 3.11 1.96 0.91 1.50
1 1/4 CS
-ADPT- P20-1 1/4 FPT3.96 2.29 1.75 N/A
1-1/4-11.5 IT60SS 3.48 2.36 0.93 1.88
1 1/2CS
-ADPT- P24-1 1/2 FPT4.20 2.61 1.81 N/A
1-1/2-11.5 IT60SS 3.73 2.58 0.93 2.06
2CS
-ADPT- P32-2 FPT4.81 3.25 1.89 N/A
2-11.5 IT60SS — — — —
All dimensions are for reference only and are subject to change.
Consult your authorized Lokring distributor for details and other options.
Female Adapter(NPT)
18
PATENTED WELD EQUIVALENT
WHEN YOU NEED A BETTER CONNECTION™
LOK
RIN
G P
IPE S
OLU
TIO
NS
™
Pipe
Size
NPS
in.
Ordering Information Dimensions, in. Loktool
Fitting
Material Shape
Fitting
Size
PXX-37FYY
Part Length
(Uninstalled)
L E
Take-
Out
A
Across Wrench
Flats
F Thread
Installation
Tool Kit
1/2CS
-ADPT- P08-37F083.27 1.46 1.84 0.81
3/4-16 UNF IT20/IT45SS 3.08 1.46 1.36 1.13
3/4CS
-ADPT- P12-37F123.95 1.60 2.33 1.13
1 1/16-12 UNF IT30/IT45SS 3.54 1.63 1.60 1.13
1CS
-ADPT- P16-37F164.61 1.95 2.63 1.38
1 5/16-12 UNF IT45/IT60SS 3.84 1.96 1.64 1.38
1 1/4CS
-ADPT- P20-37F204.94 2.29 2.72 1.68
1 5/8-12 UNF IT60SS 4.23 2.36 1.68 1.68
1 1/2CS
-ADPT- P24-37F245.72 2.61 3.32 2.00
1 7/8-12 UNF IT60SS 5.34 2.58 2.54 2.00
2CS
-ADPT- P32-37F326.50 3.25 3.58 2.63
2 1/2-12 UNF IT60SS 6.52 3.25 3.25 2.63
All dimensions are for reference only and are subject to change.
Consult your authorized Lokring distributor for details and other options.
A. Threaded end conforms to SAE J514 (37° "are).
Male Adapter(37° Flare Straight Thread)A
19
PIPE SOLUTIONS™
©2015 LOKRING TECHNOLOGY LLC®
Carbon steel 3-in. installation at fuel !ll station.
LOK
RIN
G P
IPE
SO
LUT
ION
S™
Pipe
Size
NPS
in.
Ordering Information Dimensions, in. Loktool
Fitting
Material Shape
Fitting
Size
PXX-YYSAE
Part Length
(Uninstalled)
L E
Take-
Out
A
Across Wrench
Flats
F Thread
Installation
Tool Kit
1/2CS
-ADPT- P08-0.50SAE2.43 1.46 1.00 1.06
3/4 - 16 UNF IT30/IT45SS 2.54 1.46 0.82 1.06
3/4CS
-ADPT- P12-0.75SAE3.00 1.60 1.38 1.44
1 1/16-12 UNF IT30/IT45SS 3.12 1.63 1.18 1.44
1CS
-ADPT- P16-1.00SAE3.48 1.95 1.50 1.63
1 5/16-12 UNF IT45/IT60SS 3.40 1.96 1.20 1.63
1 1/4CS
-ADPT- P20-1.25SAE3.72 2,29 1.50 2.00
1 5/8-12 UNF IT60SS 3.72 2.36 1.17 2.00
1/2CS
-ADPT- P24-1.50SAE4.02 2.61 1.63 2.25
1 7/8-12 UNF IT60SS 4.17 2.58 1.37 2.25
2CS
-ADPT- P32-2.00SAE5.93 3.25 3.00 3.00
2 1/2-12 UNF IT60SS 5.71 3.10 2.64 3.00
All dimensions are for reference only and are subject to change.
Consult your authorized Lokring distributor for details and other options.
A. Threaded end conforms to SAE J1926/1 (O-ring straight thread adapter).
Female Adapter(SAE Straight Thread)A
20
PATENTED WELD EQUIVALENT
WHEN YOU NEED A BETTER CONNECTION™
Lokring !ttings are used in many o$shore oil applications.
LOK
RIN
G P
IPE S
OLU
TIO
NS
™
Pipe
Size
NPS
in.
Ordering Information Dimensions, in. Loktool
Fitting
Material Shape
Fitting
Size
PXX-YYNPS
Part Length
(Uninstalled)
L E
Take-
Out
A
Take-
Out
B
Installation
Tool Kit
3/8CS
-ADPT- P06-3/8 NPS2.71 1.24 1.34 1.00
IT30/IT45SS 2.94 1.24 1.34 1.00
1/2CS
-ADPT- P08-1/2 NPS2.83 1.46 1.40 1.00
IT30/IT45SS 3.12 1.46 1.40 1.00
3/4CS
-ADPT- P12-3/4 NPS3.08 1.60 1.46 1.00
IT30/IT45SS 3.40 1.63 1.46 1.00
1CS
-ADPT- P16-1 NPS3.50 1.95 1.52 1.00
IT45/IT60SS 3.72 1.96 1.52 1.00
1 1/4CS
-ADPT- P20-1 1/4 NPS3.81 2.29 1.59 1.00
IT60SS 4.14 2.36 1.59 1.00
1 1/2CS
-ADPT- P24-1 1/2 NPS4.04 2.61 1.65 1.00
IT60SS 4.45 2.58 1.65 1.00
2CS
-ADPT- P32-2 NPS4.62 3.25 1.70 1.00
IT60SS 4.74 3.10 1.67 1.02
All dimensions are for reference only and are subject to change.
Consult your authorized Lokring distributor for details and other options.
Socket Weld Adapter
21
PIPE SOLUTIONS™
©2015 LOKRING TECHNOLOGY LLC®
The quality of a Lokring connection has been
recognized by the California Air Resources Board
(CARB). CARB, through their equipment and process
pre-certi!cation program has granted Lokring pre-
certi!cation status through executive order.
The California Air Resources Board through their
evaluation program has given Lokring equivalent to
WELDED status.
LOK
RIN
G P
IPE
SO
LUT
ION
S™ Pipe
Size
NPS
in.
Ordering Information Dimensions, in. Loktool
Fitting
Material Shape
Fitting
Size
PXX
Part Length
(Uninstalled)
L E
Take-
Out
A
Installation
Tool Kit
1/2CS
- SAE61SLD - P083.14 1.46 1.72
IT30/IT45SS 3.13 1.46 1.41
3/4CS
- SAE61SLD - P123.33 1.60 1.72
IT30/IT45SS 3.38 1.63 1.44
1CS
- SAE61SLD - P164.12 1.95 2.14
IT45/IT60SS 3.82 1.96 1.63
1 1/4CS
- SAE61SLD - P204.42 2.29 2.19
IT60SS 4.41 2.36 1.86
1 1/2CS
- SAE61SLD - P245.08 2.61 2.68
IT60SS 4.98 2.58 2.18
2 CS
- SAE61SLD - P325.75 3.25 2.84
IT60SS 5.55 3.10 2.48
3CS
- SAE61SLD - P487.66 4.34 3.37
IT100/IT140SS 8.09 4.50 3.38
All dimensions are for reference only and are subject to change.
Non Lokring end conforms to SAE J518 code 61 solid (tapped holes). Kit packaged separately.
Consult your authorized Lokring distributor for details and other available options.
SAE61 Solid FlangeAdapter
Pipe
Size
NPS
in
Ordering Information Dimensions, in. Loktool
Fitting
Material Shape
Fitting
Size
PXX
Part Length
(Uninstalled)
L E
Take-
Out
A
Installation
Tool Kit
1/2 CS
- SAE61KIT - P083.71 1.46 2.28
IT30/IT45SS 3.77 1.46 2.05
3/4CS
- SAE61KIT - P123.73 1.60 2.11
IT30/IT45SS 3.78 1.63 1.84
1CS
- SAE61KIT - P164.23 1.95 2.25
IT45/IT60SS 4.02 1.96 1.83
1 1/4CS
- SAE61KIT - P204.62 2.29 2.41 IT60
SS 4.62 2.36 2.08 IT60
1 1/2CS
- SAE61KIT - P244.94 2.61 2.54
IT60SS 4.89 2.58 2.09
2 CS - SAE61KIT - P32 5.40 3.25 2.48 IT60
3 CS - SAE61KIT - P48 7.19 4.34 2.91 IT100/IT140
All dimensions are for reference only and are subject to change.
Non Lokring end conforms to SAE J518 code 61 split (tapped holes). Kit packaged separately.
Consult your authorized Lokring distributor for details and other available options.
SAE61 Split FlangeAdapter
22
PATENTED WELD EQUIVALENT
WHEN YOU NEED A BETTER CONNECTION™
LOK
RIN
G P
IPE S
OLU
TIO
NS
™
ADDITIONAL
FITTING LINES
OTHER PRODUCTS
OFFERED
23
PIPE SOLUTIONS™
©2015 LOKRING TECHNOLOGY LLC®
• Brass medical gas !ttings for ASTM B88 (drawn) and B819
copper tube
• Bulkhead penetrators for pipe and tube
• Carbon steel (MAS-3000) pipe !ttings
• Marine 90/10 copper nickel (CN-200) pipe !ttings
• Marine 70/30 copper nickel (CN-700) pipe and tube !ttings
• Marine 70/30 copper nickel (CN-3300) tube !ttings
• Marine stainless steel (SS-3300) pipe !ttings
• Marine stainless steel (SS-3300) tube !ttings
• Railroad carbon steel (RR) pipe !ttings
• Stainless steel (SS40) pipe !ttings
• 4130 alloy steel (LTCS-333) pipe !ttings
• Lokring tools come in several sizes to accomodate !ttings of
di$erent sizes.
• To install a Lokring !tting, a Loktool tool head with inserts,
multipurpose gage, hydraulic pump, and hydraulic hose are needed.
Tools, inserts and gages come packaged either as:
• Individual tool kits designed for installing one size of !ttings only
(ITK Series)
OR
• Multiple purpose tool kits designed for installing multiple size
!ttings with one tool (MTK Series).
Contact your authorized Lokring distributor for ordering details.
In addition to the !ttings listed in this catalog, Lokring o$ers, as standard,
additional stainless steel (SS) pipe !ttings including:
• Metric !ttings
• SAE !ttings
• Double containment couplings
• Pipe to tube, tube to pipe adapters
• Male and female pipe thread connectors
• Socket weld connectors
• Tube and pipe stub connectors
• Ferrule type tube !tting connectors
• ASME "ange connectors
• CIP connectors
• 45° tees
• Unions, union threads, union tails
Specials may exist and can be created to your speci!cations. Contact your
authorized Lokring distributor for details.
LOK
RIN
G P
IPE
SO
LUT
ION
S™
HYDRAULIC
PUMPS
24
PATENTED WELD EQUIVALENT
WHEN YOU NEED A BETTER CONNECTION™
• All Loktool system components (installation tool, hose, pump, hydraulic
couplers) are rated at 10 000 psi (689 bar) max operating pressure.
• Any pumps or hose can be used with any Lokring installation tools.
Fast, Simple, Portable Installation – 1/4 to 4 in.
Pipe Connections fully made in minutes!!
• Electric Pump (Kit Part Number 9080184):
120 V(ac) foot-operated, high-speed pump,
best selection for high volume installations of
larger size !ttings.
• Pneumatic Pump (Kit Part Number 9080189):
Foot-operated, lightweight, pneumatic
pump operates o$ shop air (80 psi [5.6 bar]
minimum). Fast and suitable for installation of
Lokring !ttings in atmospheres which need to
be !re-safe.
• Manual Pump (Kit Part Number 9080050):
Manually operated, designed for low-volume
installations (or emergency repairs) where
there is limited or no access to electricity or
compressed air, or for atmospheres which need
to be !re-safe.
• Hydraulic Hose Assembly
(Part Number 9080111):
15-ft hose for all !tting sizes, pumps, and tool
heads. Two or more hoses can be connected
together to form longer lengths.
• Manual Hand Pump (Part Number 8080032):
Manually operated, designed for low-volume
installations where space is critical. No
electricity or compressed air is needed.
LOK
RIN
G P
IPE S
OLU
TIO
NS
™
TOOLING
DIMENSIONS
Carbon and Stainless Steel Pipe Fittings
Dimensions, in.
Pipe Size
(Fitting Size)
Pipe
OD
Loktool
Size
Tool
Width
W
Tool
Length
L
Tool
Height
H
Minimum
Spacing
Center to
Center
N
Minimum Spacing
Center to Center,
with $ttings adjacent
to each other
N1
1/4 NPS (P04) 0.540 IT20 2.36 5.00 4.95 1.58 1.83
3/8 NPS (P06) 0.675 IT30 2.66 6.45 5.72 1.80 2.08
3/8 NPS (P06) 0.675 IT45 3.91 6.38 6.66 2.43 2.70
3/8 NPS (P06) 0.675 IT50 4.21 7.29 7.08 2.58 2.85
1/2 NPS (P08) 0.840 IT30 2.66 6.45 5.72 1.88 2.19
1/2 NPS (P08) 0.840 IT45 3.91 6.38 6.66 2.51 2.81
1/2 NPS (P08) 0.840 IT50 4.21 7.29 7.08 2.66 2.96
3/4 NPS (P12) 1.050 IT30 2.66 6.45 5.72 1.99 2.27
3/4 NPS (P12) 1.050 IT45 3.91 6.38 6.66 2.61 2.90
3/4 NPS (P12) 1.050 IT50 4.21 7.29 7.08 2.76 3.05
1 NPS (P16) 1.315 IT45 3.91 6.38 6.66 2.75 3.06
1 NPS (P16) 1.315 IT50 4.21 7.29 7.08 2.90 3.21
1 NPS (P16) 1.315 IT60 5.01 8.59 7.59 3.30 3.61
1 1/4 NPS (P20) 1.660 IT50 4.21 7.29 7.08 3.07 3.41
1 1/4 NPS (P20) 1.660 IT60 5.01 8.59 7.59 3.47 3.81
1 1/2 NPS (P24)A 1.900 IT50 4.21 7.29 7.08 3.19 3.52
1 1/2 NPS (P24) 1.900 IT60 5.01 8.59 7.59 3.59 3.94
2 NPS (P32) 2.375 IT60 5.01 8.59 7.59 3.83 4.26
2 1/2 NPS (P40)B 2.875 IT100 10.18 16.00 12.75 6.67 7.12
3 NPS (P48) 3.500 IT100 10.18 16.00 12.75 6.98 7.47
4 NPS (P64)B 4.500 IT140 11.70 15.00 10.66 9.00 9.50
L and H dimensions include quick-connect. A. Stainless steel SS !ttings only. B. Carbon steel CS !ttings only.
HOW TO SELECT
TOOLING
N / N1
IT100 Tool IT20 / IT30 / IT40 / IT50 / IT60 TOOLS
25
PIPE SOLUTIONS™
©2015 LOKRING TECHNOLOGY LLC®
The shaded cells show which size
tool can install which size !tting.
Specify the !tting size and material
along with which tool size is
desired in order to receive the
proper setup for installing Lokring
!ttings.
Tool rentals available through your
authorized Lokring distributor.
Tool Selection for Carbon and Stainless Steel Pipe Fittings
Tool
Fitting Size, in.
1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
IT20
IT30
IT45
IT50
IT60
IT100
IT140
LOK
RIN
G P
IPE
SO
LUT
ION
S™
INSTALLATION
INSTRUCTIONS
INSTALLATION PROCEDURE
Note: Refer to Lokring procedure LP-105 for detailed installation instructions.
STEP 2: Using Multipurpose Gage, verify that pipe OD
is correctly sized, and mark pipe ends as shown. (Not oversized or undersized to ASTM pipe speci!cations)
Special Note: A thin coat of Loctite® 567™ PST thread sealant with PTFE may
be applied as an aid to seal where pipe surface is poor, and is suggested in
applications where the pipe wall thickness to OD ratio is less than 0.07. The
sealant should be applied from the end of the pipe up to the !rst inspection mark.
STEP 3: Select and assemble required Loktool. In-
spect and cycle tool to assure proper function.
STEP 4: Position !tting on “INSTALL” mark, fully en-
gage and actuate tool.
Forward Install
Reverse Install
Finish
Driver
• Preinstalled
• Installed
• Preinstalled
• Installed
Start
Finish
Tool colors used for indication purposes only.
Driver
Driver
Start
Driver
Install mark
PST
NO GO
INSPECT
INSTALL
STEP 1: Cut pipe/tube to within 5˚ of square. Sand
the Sealing Zone with 120 grit aluminum oxide
abrasive cloth in circumferential direction to clean
surface and remove longitudinal scratches, "at
spots, paint, lacquer or other mill !nishes, corrosion,
grease, sand, and grit. If deep scratches, pits or other
surface incongruities persist; use of 60 grit aluminum
oxide abrasive cloth followed by 120 grit cloth is
recommended.
26
PATENTED WELD EQUIVALENT
WHEN YOU NEED A BETTER CONNECTION™
LOK
RIN
G P
IPE S
OLU
TIO
NS
™
STEP 5: Carry out visual checks below to verify
successful installation.
Other parts not listed in this catalog may be available. As well, some parts listed here may be subject to
availability at time of order. Consult your authorized Lokring distributor for details.
To OrderContact your Lokring distributor for more information. See www.lokring.com for a complete listing of
distributors
DimensionsAll dimensions are reference only and subject to change.
CAD TemplatesCAD !les AutoCAD-DWG, AutoCAD-DXF and Intergraph PDS are available in 2D and 3D for most con!gurations.
Contact your authorized Lokring distributor for details or see www.lokring.com.
Warranty InformationLokring and its authorized distributors warrant to the purchaser of Lokring components from them that these
components shall be free from defects in material and workmanship under normal use and service for the life of
the product.
The purchaser’s remedies shall be limited to replacement of any Lokring components that fail through a defect
in material or workmanship.
IN NO EVENT SHALL LOKRING, OR ITS AUTHORIZED DISTRIBUTORS, BE LIABLE FOR ANY OTHER
DAMAGES (WHETHER DIRECT, INDIRECT, FORSEEABLE, CONSEQUENTIAL,OR INCIDENTAL)
SUFFERED BY THE PURCHASER OR ANYONE ELSE ARISING OUT OF THE USE OF LOKRING
PRODUCTS. THIS EXPRESS WARRANTY DISCLAIMS ALL OTHER WARRANTIES, GUARANTEES,
AND REPRESENTATIONS, EXPRESS OR IMPLIED.
Safe SelectionSystem design and system safety are the ultimate responsibilities of the end-user. Consideration to system
function, compatibility, product ratings, as well as other factors, must be given to ensure proper product
selection and function. All information in this catalog has been compiled with regard to accuracy; however, the
most up-to-date information should be veri!ed before use of the product. Lokring reserves the right to change
product dimensions, ratings, or other information.
1 12 3 65 4
Item Part DescriptionA
Part
Number
1 Loktool Body IT45-BDY-MACH 3080035
2 Loktool Jaw IT45-JAW-CST-MACH 3080036
3 Body Insert BI45-MAS/SS4-P16-FR 7080146
4 Jaw Insert JI45-MAS/SS4-P16-FR 7080147
5 Coupling MAS-3000-CPL-P16 9040069
6 Pipe 1” NPS PIPE N/A
A. Descriptions listed are speci!c to IT45 tool only. Contact your authorized
distributor for information on other tools.
1- Fitting body protrudes from
underneath swage ring
2- INSPECT mark partially
covered
(Small gap is acceptable)
3- Driver is in contact
with "ange
27
PIPE SOLUTIONS™
©2015 LOKRING TECHNOLOGY LLC®
Lokring, Loktool, ESP—TM Lokring Technology LLC
Loctite, 567—TM Henkel Corporation
© 2015 Lokring Technology LLC
January 2015, Rev 7
9070060