coin purse - dakota collectiblesdesigns photo1 and photo2 are stitched with the colors listed. 1....

Legal Notice: Making a copy, by any means, of Dakota Collectibles’ artwork or design software is a violation of copyright law.The design software is licensed to the original customer for embroidery use at one location. ©2008 Dakota Collectibles. All Rights Reserved.

Pen HolderFabric: Two pieces 71/2” X 51/2” (We used teal.) and one 13” X 71/2” (We used a coordinating print.) that will be folded with right side out.

Water soluble stabilizer.

Design PEN is stitched with the colors listed.

Coin Purse Fabric: Two pieces 4” X 71/2” (We used teal.) and one 8” X 4” (We used a coordinating print.) that will be folded with right side out.


Design COIN is stitched with the colors listed.

Cell Phone CaseFabric: Two pieces 3 3/4” X 7” (We used teal.) and one 8” X 33/4” (We used a coordinating print.) that will be folded with right side out.


Design CELL is stitched with the colors listed.

Butterfly ProjectsThread Colors

1098 Teal 51127 Lt Lt Flesh1136 Beige1149 Lt Lt Tan1194 Dk Avocado 31195 Lt Mint1225 Md Gold1241 Dk charcoal1270 Lt Gold1336 Dk Taupe1391 Med Teal 4

Safari Projects Thread Colors

1126 Lt Brown1128 Lt Taupe1157 Dk Avocado1173 Dk Dk Gold 21225 Md Gold1230 Dk Dk Tan1257 Dk Dk Tangerine1287 Dk Dk SilverBlackWhite


Photo HolderFabric: Two pieces 51/4” X 71/4” (We used teal.) and two pieces 61/4” X 101/4” (We used a coordinating print.) that will be folded with right side out.


Designs PHOTO1 and PHOTO2 are stitched with the colors listed.

1. Embroider PHOTO1 using two pieces 51/4” X 71/4” fabric. Trim close to the outside stitch.

2. Embroider PHOTO2 using the two pieces of 61/4” X 101/4” fabric folded with the right side out. The first and second color changes will be for applying the pockets of the holder.

3. The third and fourth color changes will be for applying PHOTO1.

Passport HolderFabric: Two pieces 131/2” X 51/4” (We used teal.) and one 131/2” X 51/4” (We used a coordinating print.) both will be folded with right side out.


Designs PSPRT1 and PSPRT2 are stitched with the colors listed.

1. Embroider PSPRT1 using the 131/2” X 51/4” (teal) piece of fabric folded with the right side out. Trim close to the outside stitch.

2. Embroider PSPRT2 using the 131/2” X 51/4” (print) piece of fabric folded with the right side out. The first and second color changes will be for applying the back piece of the holder. The fold will be to the top of the holder.

3. The third and fourth color changes will be for applying PSPRT1. The passport lettering will be the top.


Evening Bag and Purse (Large hoop.)

Fabric (We used brown.): Two pieces 83/4” X 71/2” and one 8” X 83/4” that will be folded with right side out.


Design EVEBAG is stitched with one color.

Fabric: Two pieces 83/4” X 71/2” and one 8” X 83/4” that will be folded with right side out.


Design LHPUR is stitched with the colors listed.

Cording, beads, crystals, etc. to add to the evening bag or purse.

Evening Bag and Purse (5” X 7” hoop) Fabric (We used black.): Four pieces 43/4” X 71/2” and one 8” X 83/4” that will be folded with right side out.


Designs EVE1 and EVE2 are stitched with one color.

Fabric: Four pieces 43/4” X 71/2” and one 8” X 83/4” that will be folded with right side out.


Designs PURSE1 and PURSE2 are stitched with the colors listed.

Cording, beads, crystals, etc. to add to the evening bag or purse.


For designs: PEN, SAFPEN, COIN, SAFCOIN, CELL, SAFCEL, SAFPRS, LHPUR, and EVEBAG.

*Tape will help hold the fabric in place. Remove when trimming the fabric after the tack down stitch.

*Wind bobbin with coordinating thread.

Hoop two pieces water soluble stabilizer.

After the first outline stitch lay the folded edge of fabric on the inside stitched line.

After the first tack down stitch trim the fabric close to the stitches.

After the second outline stitch lay the fabric on the stitched lines.


After the second tack down stitch trim the fabric close to the stitches.

Embroider the remaining design.

Trim the water soluble stabilizer.

Rinse the stabilizer away. Lay flat to dry. Press. Add buttons, beads, etc..


For designs: PHOTO1 and PHOTO2.


*Wind bobbin with coordinating thread. Stitch PHOTO1 (SAFFOT) first.


After the first outline stitch lay the fabric for the cover on the stitched lines.

After the tack down stitch embroider the remaining design.

Trim the sides of the fabric and water soluble stabilizerclose to the outside stitches.

Do not rinse the stabilizer away until the project is complete.

Stitch PHOTO2 (SAFFOT2) next.



After the first outline stitch lay the folded edges of fabric to the inside of the stitched lines.


After the second outline stitch lay the embroidered fabric on the stitched lines.




Rinse the stabilizer away. Lay flat to dry. Press. Add buttons, beads, etc.


For designs: SAFPPT1, SAFPPT2, PSPRT1 and PSPRT2.


*Wind bobbin with coordinating thread. Stitch PSPRT1 (SAFPPT1) first.


After the first outline stitch lay the folded edge of the fabric on the top stitched line.

After the tack down stitch embroider the remaining design.

Trim the sides and bottom of the fabric andwater soluble stabilizer close to the outside stitches.


Stitch PSPRT2 (SAFPPT2) next.



After the first outline stitch lay the folded edge of fabric on the top stitched line.


After the second outline stitch lay the folded edge of the embroidered fabric on the stitched lines.




Rinse the stabilizer away. Lay flat to dry. Press. Add buttons, beads, etc.


For designs: PURSE1, PURSE2, SAFPR1, SAFPR2, EVE1, and EVE2.

*Tape will help hold the fabric in place. Remove tape when trimming the fabric after the tack down stitch.

*Wind bobbin with coordinating thread. Stitch PURSE1 (SAFPR1 or EVE1) first.


After the first outline stitch lay the fabric on the stitched lines.

After the tack down stitch trim the fabric close to stitches.


Trim the fabric and water soluble stabilizer around the outside stitches.


Stitch PURSE2 (SAFPR2 or EVE2) next.


The first color change will be the guide line to lay PURSE1 (SAFPR1 or EVE1). Lay the light column stitched edge along the stitch line with the pocket down.

After the outline stitch lay the fabric on the stitched line.

After the tack down stitch trim the fabric close to the stitches.



Rinse the stabilizer away. Lay flat to dry. Press Add buttons, beads, etc.


Butterfly T-shirt

Items you will need:

Cut-away stabilizerChalk wheelDesign FL1669

1. Mark the center of the design on the T-shirt. 2. Hoop the T-shirt with cut-away stabilizer.3. Embroider design.4. Remove from hoop. Trim stabilizer close to design.

Safari Tote Bag

Items you will need:

Cut-away stabilizerChalk wheelDesign WCA319

May have to open the side seam to embroider.

1. Mark the center of the design on the tote bag. 2. Hoop the tote bag with cut-away stabilizer.3. Embroider design.4. Remove from hoop. Trim stabilizer close to design.


Butterfly BackpackItems you will need:

1/2yd Fabric (We used floral print.)1/4yd Fabric (We used teal.)9” X 7” Fabric (We used stripe print.)Cut-away stabilizerWater soluble stabilizer1 yard cording3” of 1/8” elastic for the button ButtonChalk wheelDesigns FL1543 and FL1538

Use 1/4” seam to assemble backpack.

1. Cut fabric: Floral fabric, one 30” X 16” for backpack. Teal fabric, two 30” X 4” for the straps, two 5” X 6” for the flap. Stripe print fabric, one 9” X 7” for the pocket.

2. Straps: Fold the right sides together. Stitch. Turn right sides out. Press with the seam centered. Edge stitch both sides. Repeat.

3. Mark the center on one 5” X 6” piece of fabric for the flap. The 5” sides as the bottom and top.

4. Hoop the fabric with two pieces of cut-away stabilizer. 5. Embroider design.

6. Remove from hoop. Trim stabilizer close to design.

7. Lay the two 5” X 6” pieces of fabric right sides together.

8. Place the elastic in a loop on the 5” bottom side center.

9. Stitch the sides leaving an opening to turn right sides out.

10. Turn. Stitch opening closed. Press. 11. Mark the center on the 9” X 7” piece of fabric for the pocket.

12. Hoop the fabric with two pieces of cut-away stabilizer. 13. Embroider design.

14. Remove from hoop. Trim stabilizer close to design.

15. Turn top in 1”. Stitch.

16. Turn side and bottom in 1/2”.

17. Place the pocket in the center of the 30” X 16” floral piece of fabric 2” from the bottom (30” edges as the top and bottom).

18. Edge stitch the pocket in place.

19. Stitch the 16” sides of the floral piece of fabric with right sides together. 20. Center the back seam with the pocket center right sides together.

21. Stitch bottom seam.

22. Fold the top edge in 1/4”. Stitch.

23. Cord drawstring opening: Place a 3/4” buttonhole centered in the front of the backpack. Have the top of the buttonhole start 11/4” from the top edge.

24. Fold the top edge in 11/4”. Stitch 1” from the top edge, stitch 1/4” from the top edge. This will form the casing.

25. Place the strap on the bottom seam 3/4” from the point of the corner, pin in place.

26. Turn the bag in side out. Place the bottom seam and the side together.

27. Stitch 1” from the corner. This will form the bottom of the backpack. Repeat with other strap.

28. Turn right side out.

29. Run the cord through the casing on top of the backpack, make sure it is centered.

30. Place the straps with the inside edge of the straps on the center seam 1/2” from the top edge. Tack the straps in place.

31. Center the 5” X 6” flap over the straps.

32. Stitch the flap in place (use the seams that form the casing as a guide) the seam from the top to bottom will hold the cording in place. Top stitch al the way around the flap.

33. Add button to the front of the back pack 11/2” above the pocket.


STOCK EMBROIDERY DESIGN SOFTWARE LICENSE

1. LICENSE: The design software is licensed to the original customer for embroidery use at one location. The use of the software at more than one location is a violation of copyright law.

2. COPYRIGHTS: The stock embroidery designs, the software, and the catalog are owned and copyrighted by Dakota Collectibles and are protected by United States copyright laws and international treaties. You may not copy the software except: a) you may make one copy of the software for back-up or archival purposes; and b) you may transfer the software onto a hard disk provided you keep the original solely for back-up or archival purposes. You may not copy the catalog, flyers, or other printed materials which accompany the software.

3. OTHER RESTRICTIONS: You may not rent, lease, or share the software. You may permanently transfer the software provided that you transfer this license and the software together; do not retain any copies of the software; and therecipient agrees to the terms of this license. If the software is sold or otherwise transferred, the parties agree to provide Dakota Collectibles with the recipient’s name, business name, address, telephone number, and a list of the software involved with the transfer.

4. WARRANTY DISCLAIMER: Dakota Collectibles’ liability and your exclusive remedy for a defective product shall be either: a) replacement of defective software; or b) a return of the purchase price paid for the returned software.

5. LIMITATION OF DAMAGES: IN NO EVENT SHALL DAKOTA COLLECTIBLES BE LIABLE FOR ANY CONSEQUENTIAL DAMAGES (INCLUDING BUSINESS INTERRUPTION, LOSS OF PROFITS, ETC.) ARISING OUT OF THE USE OR LOSS OF USE OF THE SOFTWARE, EVEN IF DAKOTA COLLECTIBLES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow the exclusion of this liability, so this limitation may not apply to you.

6. REPRODUCTION AND SALE OF EMBROIDERED GOODS: This license allows you to sew the designs on fabric or other material. You may then sell, trade, or give away the embroidered goods which have the designs on them.

© COPYRIGHT NOTICE: Dakota Collectibles copyrights its artwork. The copyrights cover all of the embroidery designs as displayed in its catalogs, flyers, home embroidery collections, all promotional advertising, and the design software which reproduces those designs. The copyrights protect your best interests as well as ours. Dakota Collectibles is prosecuting copyright infringements to the fullest extent of the law. You cannot legally copy, by any means, such as, for example, scanning, photocopies, or electronic transfer, Dakota Collectibles’ artwork or design software. The design software you obtain is licensed for customer use at one location. Buying, selling, trading, or copying our artwork or design software is a violation of copyright law. Preventing the illegal copying of our designs and design software will help bring new and creative designs to you. If you, or anyone you know, has been contacted to buy, sell, trade, or copy our artwork or software designs, please contact Dakota Collectibles.Legal Notice: Making a copy, by any means, of Dakota Collectibles’ artwork or design software is a violation of copyright law. The design software is licensed to the original customer for embroidery use at one location.

©2010 Dakota CollectiblesAll Rights Reserved

Software License and Contact InformationCall our Toll-Free Order Line...

1 800-331-3160Monday through Friday, 8 a.m. - 5 p.m. CTor call 701-255-2409

Fax your order to our Toll-Free Fax Line...

1 888-325-265524 hours a day, 7 days a weekor FAX to 701-255-7207

Designs in Home Formats are available at...

www.gonutsgocreative.com24 hours a day, 7 days a week

E-mail your order to...

[email protected] hours a day, 7 days a weekE-mails will be responded to Monday through Friday, 8 a.m. - 5 p.m. CT

Send your order to...

Dakota Collectibles2000 Schafer St.Bismarck, ND 58501

coin purse - dakota collectiblesdesigns photo1 and photo2 are stitched with the colors listed. 1....

Documents