codigos numeracion modelos pfaff maquina coser
TRANSCRIPT
7/28/2019 Codigos Numeracion Modelos Pfaff Maquina Coser
http://slidepdf.com/reader/full/codigos-numeracion-modelos-pfaff-maquina-coser 1/7
https://www.pfaff- industrial.de/pfaff/en/service/numberingsystem April 27, 2013
Numbering system (Powerline numbering system inprogress)
PFAFF Industrial classifies its products with a comprehensive numbering system which isdescribed in the following. Each number comprises the main class, which is the f irst number andconsists of two t o f our digits, and various subclasses. The subclasses are separated from themain class, and ot her subclasses, by a dash.
1. Code numbers of subclasses
The variants of the subclasses are marked by two-digit numbers which are added to thecorresponding subclass with an oblique stroke (/).
2. Seam-type independent subclasses
This subclass coding refers to the type of part set , the shape and version of which isdetermined by the workpiece. The subclasses involved here are: 2/.., 3/.., 6/.., 8/.., 34/.. and 55/..
3. Seam-type dependent subclasses
A seam-type dependent subclass refers to an attachment which is f itt ed to t he machine and inconnect ion with the part set belonging to it produces a certain type of seam. Subclassesbelonging to this category all have numbers from 1 to 499, with exception of the above-
mentioned seam-type independent subclass numbers.For example: Subclass -19/19 or -40/01
4. Special design versions
These subclasses pertain to sewing heads on which certain parts are missing;subclasses numbers 650 to 655.For example: Subclass -650/01 = without part set
5. Design-dependent subclasses
Due to their design, these subclasses require a special housing, and therefore they generallycannot be f it ted to existing machines.Subclass numbers 700 to 799.For example: Subclass -716/06 or -720/04
Subclass Description
-704/.. large needle-plate cutout
-712/.. Machines without feed mechanism
7/28/2019 Codigos Numeracion Modelos Pfaff Maquina Coser
http://slidepdf.com/reader/full/codigos-numeracion-modelos-pfaff-maquina-coser 2/7
-716/.. Z igzag contro l (with 1 cam)
-720/.. Needle-bar control mechanism
-725/.. Horizontal edge trimmer (driven from below)
-726/.. Horizontal edge trimmer (driven from top)
-731/.. Vertical edge trimmer (cutt ing at right side of needle)
-734/.. Gathering attachment (driven from top)
-739/.. Parallel differential bottom feed
-771/.. Undert rimmer
-798/.. Sewing-head extension
-948/.. Puller feed
6. Stitch-type dependent subclasses
These subclasses designate the st itch t ype in the 5480 (chainst itch) Series, and the last digitbefore the stroke together with the two digits after the stroke indicate the international stitchtype.Subclasses 800 to 899.
For example: -811/01 = stitch type 101 or -814/01 = stitch type 401
7. Mechanical subclasses
Mechanical subclasses comprise devices that can be fitted to an existing assembled sewinghead, usually with not much work involved.Subclasses 900 to 999.For example -909/04 or -964/03.
Subclass Beschreibung
-900/.. Thread t rimmer
-906/.. thread-tension cont ro l
-908/.. Thread pulling mechanism
-909/.. Thread wiper
-910/.. Automat ic presser foot lif t
-911/.. Backtacking system
7/28/2019 Codigos Numeracion Modelos Pfaff Maquina Coser
http://slidepdf.com/reader/full/codigos-numeracion-modelos-pfaff-maquina-coser 3/7
-913/.. Needle posit ioning system
-914/.. pleat ing unit
-915/.. Cording- and double seams
-917/.. St itch condensat ion system
-918/.. Switch control
-920/.. Airblast
-921/.. Visual top feed indicator
-925/.. Air filter/regulator for pneumatic systems
-926/.. Thread monitor
-940/.. Needle plates for sewing convex articles
-944/.. Roller presser
-958/05 Servo moto r drive (cycling machines)
-964/.. Seam-pattern size quick-adjustment
-971/.. Sensor control for backtack and stitch condensation
-980/.. Edge detection by sensor (for Sensomat)
8. Shape and function of feeding elements (on seam-type independentsubclasses)
On machines with a normal feed t ype (e.g. PFAFF 244, 483)Subclass numbers:
/01 = standard shape of part set /02 = bridge-type part set /03 = same as /01, butwith two-part foo t /04 = same as /01, but with three-part foo t /05 = same as /02, butwith two-part foo t /06 = same as /02, but with t hree-part foo t /07 = reduced sizepart set /08 = same as /07, but with two-part foo t (intended) /09 = same as /01, butwith tandem foot (intended) /10 = same as /02, but with tandem foot /11 =extended-length part set /12 = same as /02, but presser foot with lock /13 = sameas /11, but t wo-part foo t /14 = (not in use) /15 = same as /02, but t wo-part foot(special compensating presser) /16-19 = intended for f urther versions /21-39 =generally the same as /01 to /19, but with different features.
On machines with variable top feed (e.g. PFAFF 937 or 487-G-)
On these machines the feeding eff ect is for the greater part achieved by the shape andarrangement of the sewing parts (viewed from the point of entry of the needle).
Pushing-type feedFor shift -f ree joining of workpiece plies, part icularly for applying f ullness (top feed
7/28/2019 Codigos Numeracion Modelos Pfaff Maquina Coser
http://slidepdf.com/reader/full/codigos-numeracion-modelos-pfaff-maquina-coser 4/7
engages workpiece in front of the needle).Subclass numbers: /41 to /59 = pushing-type part sets
Pulling-type feedFor shif t -f ree sewing of assembly seams. Very suitable for machines with auxiliaryequipment (top feed engages workpiece behind the needle).Subclass numbers: /61 to /79 = pulling-type part sets
All-round feedFor sewing problem materials such as smooth or coated materials (top feed engages
before, at the side of and behind the needle).Subclass numbers: /81 to /99 = all-round feed part sets
9. Letter codes
For indicating machine models, stroke lengths and st itch lengths.
A = Machine equipment for light materials
B = Machine equipment for medium materials
B/C = B refers to the material (fabric, leather)C refers to the thread size (fancy thread), needle thickness, needle hole size (2.2mm) and tooth pitch of the feed dog (1.8 mm)
C = Machine equipment for medium-heavy materials
C/D = C refers to the material (fabric, leather)D refers to the thread size (fancy thread), needle thickness, needle hole size (2.6mm) and tooth pitch of the feed dog (2.2 mm)
D = Machine equipment for heavy materials
In the dif ferent machine equipment types the above-mentioned lett ers (fo r machinemodels) refer to:
A (1.0) = Needle hole size 1.0, tooth pitch 1.0, needle size 60
A = Needle hole size 1.2, tooth pitch 1.3, needle size 60 - 70
B = Needle hole size 1.6, tooth pitch 1.5, needle size 80 - 100
B/C = Needle hole size 2.2, too th pitch 1.8, needle size 110 - 140
C = Needle hole size 2.2, tooth pitch 1.8, needle size 110 - 140
C/D = Needle hole size 2.6, too th pitch 2.2, needle size 160 - 180
D = Needle hole size 2.6, tooth pitch 2.2, needle size 160 – 180
7/28/2019 Codigos Numeracion Modelos Pfaff Maquina Coser
http://slidepdf.com/reader/full/codigos-numeracion-modelos-pfaff-maquina-coser 5/7
as well as hook, take-up, thread tension and presser system.
G = Hook with large bobbin capacity
H = Stroke indication for presser foot and needle bar
Needle bar stroke: H = needle bar st roke 33 mm (on PFAFF 5483 and 5489)
L = Machine equipment for leather operations
M = Overload clutch (safety clutch)
N == Indication of stitch length
The maximum st itch length is generally 4.5 mm and is not indicated separately inthe machine classif icat ion. The letter „N“ stands for a maximum stitch length of 6
mm. All ot her st itch lengths are indicated with the letter N and a number number which indicates the maximum stitch length in millimetres.
Number Max. stitch length
N 2.5 2.5 mm
N 3.5 3.5 mm
N 3.6 3.6 mm
N 5 5.0 mm
N 6.0 mm
N 7 7.0 mm
N 8 8.0 mm
N 10 10.O mm
On machines with dif ferential feed types, the lengths of all feed elements areindicated in the case of st itch length variants.
The sequence is as follows: Stitch-length determining feed dog
(Mainfeed
= back f eed dog on machines with diff erential feed, e.g. PFAFF487/489-G-, 489 or feed do on machines with dro feed and to
7/28/2019 Codigos Numeracion Modelos Pfaff Maquina Coser
http://slidepdf.com/reader/full/codigos-numeracion-modelos-pfaff-maquina-coser 6/7
dog) feed, e.g. PFAFF 437-706/81 or 487-G.
Auxiliaryfeeddog
= f ront feed dog on machines with differential feed, e.g. PFAFF487/489-G-706/83, 489, or vibrating presser (top feed dog) onmachines with drop feed and top feed, e.g. PFAFF 437-706/81 or 487-G.
Top
feeddog
= vibrating presser on top feed machines with differential bottom
feed, e.g. PFAFF 487/489-G
Examples:
N 24 4.5 mm max. feed stroke of auxiliary feed dog 2.5 mm max. stroke length of stitch length determining feed dog
N 244 4.5 mm max. stroke of Obertransporteur 4.5 mm max. stroke of auxiliary feeddog 2.5 mm max. stroke length of st itch length determining feed dog
P = Four-mot ion drop feed on top f eed machines
R = Round eccentric
S = Machine equipment for operations on fabric
10. Requirements for machine orders
The use of modern facilities fo r handling and scheduling orders means that fulfilment of certainrequirements is indispensable.For this reason the fo llowing sequence must be strictly adhered to:
1. Machine main class
2. Stroke version (706/..) on top feed machines, needle bar stroke (H) on chainst itchmachines or hook version (G = hook with large bobbin capacity), Rundexzenter (R)
3. Design-dependent or st itch-t ype dependent subclasses for chainstitch machines andmechanised sewing units
4. Seam-type dependent or independent subclass
5. Mechanical subclass
6. Machine model (A; B; B/C; C; C/D; D)
7. Application type(S; L)
8. Needle gauge or overedge gauge
7/28/2019 Codigos Numeracion Modelos Pfaff Maquina Coser
http://slidepdf.com/reader/full/codigos-numeracion-modelos-pfaff-maquina-coser 7/7
9. Trimming or top-st itching depth
10. Key code for feed type (P)
11. Key code for overload clutch (M)
12. Key code for stitch length (N)
Examples:
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
242 -06/01 -900/56 B S X4,8 N
487 G- -731/11 -6/41 B S X5,0
1245 -6/01 -900/56 C L P M N
5487 -811/01 -2/47 -900/75 B S N10
3588 -02/01
3811 -11/45