cn forklif training centre seo
TRANSCRIPT
CN FORKLIF TRAINING CENTRE
CN Forklift Training Centre is the leading skills training organization in Mississauga on Canada. Here at CN Forklift Training Centre we have expanded our earthmoving operations to be able to better offer a complete earthmoving training experience.
Overview Only trained and evaluated operators
can drive forklifts
Employer certifies successful completion of training and evaluation
Operators can only drive the types of forklifts on which they have been trained
Forklift Rules Keep the load close
to the ground
Keep to the right
Obey speed limits Slow down, sound
horn where vision is obstructed
RE-TRAINING ASSIGNED TO
DIFFERENT TYPE OF TRUCK
EVALUATE OPERATOR’S PERFORMANCE EVERY 3 YEARS
Refresher course every 3 years (not required)
CONDITIONS CHANGE IN WORKPLACE
Retraining re-evaluation Triggered by
certain events: Accidents Near-misses Assignment to
different type of truck Changes in work
environment Observation of unsafe
operation
BASIC FORKLIFT PRINCIPLES
OVERHEAD GUARD
MAST
CARRIAGE
BACKREST
LIFT CYLINDER
TILT CYLINDERS
FORKS
LOAD CAPACITY6000 lbs
PROPANE ONLY
Components of a Forklift Truck
Maritime Industrial Trucks
Picking up loads Never exceed the rated
capacity of your unit Forks must be spaced properly Be sure the load is stacked
properly and is balanced Secure the load to the pallet Drive into load as far as
possible Tilt the load back slightly &
then lift it Watch for overhead objects or
side objects Lower load 4 to 6 inches above
ground level for travelling
Stability of Powered Industrial Trucks
Stability Triangle
Longitudinal Stability
Lateral Stability
Dynamic Stability
Safe Work Procedures Always operate within
the specific capacity of your equipment.
Always look in the direction of travel.
Always think about the hazards of the route you must take before you get there.
Always operate your equipment at safe speed.
Stability Triangle
Load CG
Vertical StabilityLine(Line of Action)
Combined CG
Truck CG
Load CG
Combined CG
Vertical StabilityLine(Line of Action)
Truck CG
The vehicle is stable This vehicle is unstable and will continue to tip over
Preoperation Inspection
As an authorized operator, it is your responsibility to make sure your forklift functions properly
OSHA requires preparation inspections
Company wants to comply with OSHA and be sure equipment is maintained
Fueling & charging of batteries
Workplace - Related training Topics
Pedestrian traffic
Narrow aisles, restricted areas
Hazardous locations
Ramps, sloped surfaces
Closed environments